1 What: /sys/bus/usb/devices/<INTERFAC !! 1 What: /sys/bus/usb/devices/INTERFACE/authorized
2 Date: August 2015 2 Date: August 2015
3 Description: 3 Description:
4 This allows to authorize (1) o 4 This allows to authorize (1) or deauthorize (0)
5 individual interfaces instead 5 individual interfaces instead a whole device
6 in contrast to the device auth 6 in contrast to the device authorization.
7 If a deauthorized interface wi 7 If a deauthorized interface will be authorized
8 so the driver probing must be 8 so the driver probing must be triggered manually
9 by writing INTERFACE to /sys/b 9 by writing INTERFACE to /sys/bus/usb/drivers_probe
10 This allows to avoid side-effe 10 This allows to avoid side-effects with drivers
11 that need multiple interfaces. 11 that need multiple interfaces.
12 12
13 A deauthorized interface canno 13 A deauthorized interface cannot be probed or claimed.
14 14
15 What: /sys/bus/usb/devices/usbX/inte 15 What: /sys/bus/usb/devices/usbX/interface_authorized_default
16 Date: August 2015 16 Date: August 2015
17 Description: 17 Description:
18 This is used as value that det 18 This is used as value that determines if interfaces
19 would be authorized by default 19 would be authorized by default.
20 The value can be 1 or 0. It's 20 The value can be 1 or 0. It's by default 1.
21 21
22 What: /sys/bus/usb/device/.../author 22 What: /sys/bus/usb/device/.../authorized
23 Date: July 2008 23 Date: July 2008
24 KernelVersion: 2.6.26 24 KernelVersion: 2.6.26
25 Contact: David Vrabel <david.vrabel@csr. 25 Contact: David Vrabel <david.vrabel@csr.com>
26 Description: 26 Description:
27 Authorized devices are availab 27 Authorized devices are available for use by device
28 drivers, non-authorized one ar 28 drivers, non-authorized one are not. By default, wired
29 USB devices are authorized. 29 USB devices are authorized.
30 30
>> 31 Certified Wireless USB devices are not authorized
>> 32 initially and should be (by writing 1) after the
>> 33 device has been authenticated.
>> 34
>> 35 What: /sys/bus/usb/device/.../wusb_cdid
>> 36 Date: July 2008
>> 37 KernelVersion: 2.6.27
>> 38 Contact: David Vrabel <david.vrabel@csr.com>
>> 39 Description:
>> 40 For Certified Wireless USB devices only.
>> 41
>> 42 A devices's CDID, as 16 space-separated hex octets.
>> 43
>> 44 What: /sys/bus/usb/device/.../wusb_ck
>> 45 Date: July 2008
>> 46 KernelVersion: 2.6.27
>> 47 Contact: David Vrabel <david.vrabel@csr.com>
>> 48 Description:
>> 49 For Certified Wireless USB devices only.
>> 50
>> 51 Write the device's connection key (CK) to start the
>> 52 authentication of the device. The CK is 16
>> 53 space-separated hex octets.
>> 54
>> 55 What: /sys/bus/usb/device/.../wusb_disconnect
>> 56 Date: July 2008
>> 57 KernelVersion: 2.6.27
>> 58 Contact: David Vrabel <david.vrabel@csr.com>
>> 59 Description:
>> 60 For Certified Wireless USB devices only.
>> 61
>> 62 Write a 1 to force the device to disconnect
>> 63 (equivalent to unplugging a wired USB device).
>> 64
31 What: /sys/bus/usb/drivers/.../new_i 65 What: /sys/bus/usb/drivers/.../new_id
32 Date: October 2011 66 Date: October 2011
33 Contact: linux-usb@vger.kernel.org 67 Contact: linux-usb@vger.kernel.org
34 Description: 68 Description:
35 Writing a device ID to this fi 69 Writing a device ID to this file will attempt to
36 dynamically add a new device I 70 dynamically add a new device ID to a USB device driver.
37 This may allow the driver to s 71 This may allow the driver to support more hardware than
38 was included in the driver's s 72 was included in the driver's static device ID support
39 table at compile time. The for 73 table at compile time. The format for the device ID is:
40 idVendor idProduct bInterfaceC 74 idVendor idProduct bInterfaceClass RefIdVendor RefIdProduct
41 The vendor ID and device ID fi 75 The vendor ID and device ID fields are required, the
42 rest is optional. The `Ref*` t 76 rest is optional. The `Ref*` tuple can be used to tell the
43 driver to use the same driver_ 77 driver to use the same driver_data for the new device as
44 it is used for the reference d 78 it is used for the reference device.
45 Upon successfully adding an ID 79 Upon successfully adding an ID, the driver will probe
46 for the device and attempt to 80 for the device and attempt to bind to it. For example::
47 81
48 # echo "8086 10f5" > /sys/bu 82 # echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
49 83
50 Here add a new device (0458:70 84 Here add a new device (0458:7045) using driver_data from
51 an already supported device (0 85 an already supported device (0458:704c)::
52 86
53 # echo "0458 7045 0 0458 704 87 # echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id
54 88
55 Reading from this file will li 89 Reading from this file will list all dynamically added
56 device IDs in the same format, 90 device IDs in the same format, with one entry per
57 line. For example:: 91 line. For example::
58 92
59 # cat /sys/bus/usb/drivers/f 93 # cat /sys/bus/usb/drivers/foo/new_id
60 8086 10f5 94 8086 10f5
61 dead beef 06 95 dead beef 06
62 f00d cafe 96 f00d cafe
63 97
64 The list will be truncated at 98 The list will be truncated at PAGE_SIZE bytes due to
65 sysfs restrictions. 99 sysfs restrictions.
66 100
67 What: /sys/bus/usb-serial/drivers/.. 101 What: /sys/bus/usb-serial/drivers/.../new_id
68 Date: October 2011 102 Date: October 2011
69 Contact: linux-usb@vger.kernel.org 103 Contact: linux-usb@vger.kernel.org
70 Description: 104 Description:
71 For serial USB drivers, this a 105 For serial USB drivers, this attribute appears under the
72 extra bus folder "usb-serial" 106 extra bus folder "usb-serial" in sysfs; apart from that
73 difference, all descriptions f 107 difference, all descriptions from the entry
74 "/sys/bus/usb/drivers/.../new_ 108 "/sys/bus/usb/drivers/.../new_id" apply.
75 109
76 What: /sys/bus/usb/drivers/.../remov 110 What: /sys/bus/usb/drivers/.../remove_id
77 Date: November 2009 111 Date: November 2009
78 Contact: CHENG Renquan <rqcheng@smu.edu. 112 Contact: CHENG Renquan <rqcheng@smu.edu.sg>
79 Description: 113 Description:
80 Writing a device ID to this fi 114 Writing a device ID to this file will remove an ID
81 that was dynamically added via 115 that was dynamically added via the new_id sysfs entry.
82 The format for the device ID i 116 The format for the device ID is:
83 idVendor idProduct. After 117 idVendor idProduct. After successfully
84 removing an ID, the driver wil 118 removing an ID, the driver will no longer support the
85 device. This is useful to ens 119 device. This is useful to ensure auto probing won't
86 match the driver to the device 120 match the driver to the device. For example:
87 # echo "046d c315" > /sys/bus/ 121 # echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
88 122
89 Reading from this file will li 123 Reading from this file will list the dynamically added
90 device IDs, exactly like readi 124 device IDs, exactly like reading from the entry
91 "/sys/bus/usb/drivers/.../new_ 125 "/sys/bus/usb/drivers/.../new_id"
92 126
93 What: /sys/bus/usb/devices/.../power 127 What: /sys/bus/usb/devices/.../power/usb2_hardware_lpm
94 Date: September 2011 128 Date: September 2011
95 Contact: Andiry Xu <andiry.xu@amd.com> 129 Contact: Andiry Xu <andiry.xu@amd.com>
96 Description: 130 Description:
97 If CONFIG_PM is set and a USB 131 If CONFIG_PM is set and a USB 2.0 lpm-capable device is plugged
98 in to a xHCI host which suppor 132 in to a xHCI host which support link PM, it will perform a LPM
99 test; if the test is passed an 133 test; if the test is passed and host supports USB2 hardware LPM
100 (xHCI 1.0 feature), USB2 hardw 134 (xHCI 1.0 feature), USB2 hardware LPM will be enabled for the
101 device and the USB device dire 135 device and the USB device directory will contain a file named
102 power/usb2_hardware_lpm. The 136 power/usb2_hardware_lpm. The file holds a string value (enable
103 or disable) indicating whether 137 or disable) indicating whether or not USB2 hardware LPM is
104 enabled for the device. Develo 138 enabled for the device. Developer can write y/Y/1 or n/N/0 to
105 the file to enable/disable the 139 the file to enable/disable the feature.
106 140
107 What: /sys/bus/usb/devices/.../power 141 What: /sys/bus/usb/devices/.../power/usb3_hardware_lpm_u1
108 /sys/bus/usb/devices/.../power 142 /sys/bus/usb/devices/.../power/usb3_hardware_lpm_u2
109 Date: November 2015 143 Date: November 2015
110 Contact: Kevin Strasser <kevin.strasser@ 144 Contact: Kevin Strasser <kevin.strasser@linux.intel.com>
111 Lu Baolu <baolu.lu@linux.intel. 145 Lu Baolu <baolu.lu@linux.intel.com>
112 Description: 146 Description:
113 If CONFIG_PM is set and a USB 147 If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
114 in to a xHCI host which suppor 148 in to a xHCI host which supports link PM, it will check if U1
115 and U2 exit latencies have bee 149 and U2 exit latencies have been set in the BOS descriptor; if
116 the check is passed and the ho 150 the check is passed and the host supports USB3 hardware LPM,
117 USB3 hardware LPM will be enab 151 USB3 hardware LPM will be enabled for the device and the USB
118 device directory will contain 152 device directory will contain two files named
119 power/usb3_hardware_lpm_u1 and 153 power/usb3_hardware_lpm_u1 and power/usb3_hardware_lpm_u2. These
120 files hold a string value (ena 154 files hold a string value (enable or disable) indicating whether
121 or not USB3 hardware LPM U1 or 155 or not USB3 hardware LPM U1 or U2 is enabled for the device.
122 156
123 What: /sys/bus/usb/devices/.../ltm_c 157 What: /sys/bus/usb/devices/.../ltm_capable
124 Date: July 2012 158 Date: July 2012
125 Contact: Sarah Sharp <sarah.a.sharp@linu 159 Contact: Sarah Sharp <sarah.a.sharp@linux.intel.com>
126 Description: 160 Description:
127 USB 3.0 devices may optionally 161 USB 3.0 devices may optionally support Latency Tolerance
128 Messaging (LTM). They indicat 162 Messaging (LTM). They indicate their support by setting a bit
129 in the bmAttributes field of t 163 in the bmAttributes field of their SuperSpeed BOS descriptors.
130 If that bit is set for the dev 164 If that bit is set for the device, ltm_capable will read "yes".
131 If the device doesn't support 165 If the device doesn't support LTM, the file will read "no".
132 The file will be present for a 166 The file will be present for all speeds of USB devices, and will
133 always read "no" for USB 1.1 a 167 always read "no" for USB 1.1 and USB 2.0 devices.
134 168
135 What: /sys/bus/usb/devices/<INTERFAC !! 169 What: /sys/bus/usb/devices/.../(hub interface)/portX
136 Date: February 2023 <<
137 Contact: Bastien Nocera <hadess@hadess.n <<
138 Description: <<
139 Some USB devices use a USB rec <<
140 wirelessly with their device u <<
141 attribute allows user-space to <<
142 connected to its receiver dong <<
143 the device to be absent when c <<
144 device's battery, show a heads <<
145 an on-screen keyboard if the o <<
146 turned off. <<
147 This attribute is not to be us <<
148 statuses available in WWAN, WL <<
149 If the device does not use a r <<
150 device, then this attribute wi <<
151 <<
152 What: /sys/bus/usb/devices/.../<hub_ <<
153 Date: August 2012 170 Date: August 2012
154 Contact: Lan Tianyu <tianyu.lan@intel.co 171 Contact: Lan Tianyu <tianyu.lan@intel.com>
155 Description: 172 Description:
156 The /sys/bus/usb/devices/.../< !! 173 The /sys/bus/usb/devices/.../(hub interface)/portX
157 is usb port device's sysfs dir 174 is usb port device's sysfs directory.
158 175
159 What: /sys/bus/usb/devices/.../<hub_ !! 176 What: /sys/bus/usb/devices/.../(hub interface)/portX/connect_type
160 Date: January 2013 177 Date: January 2013
161 Contact: Lan Tianyu <tianyu.lan@intel.co 178 Contact: Lan Tianyu <tianyu.lan@intel.com>
162 Description: 179 Description:
163 Some platforms provide usb por 180 Some platforms provide usb port connect types through ACPI.
164 This attribute is to expose th 181 This attribute is to expose these information to user space.
165 The file will read "hotplug", 182 The file will read "hotplug", "hardwired" and "not used" if the
166 information is available, and 183 information is available, and "unknown" otherwise.
167 184
168 What: /sys/bus/usb/devices/.../<hub_ !! 185 What: /sys/bus/usb/devices/.../(hub interface)/portX/location
169 Date: October 2018 186 Date: October 2018
170 Contact: Bjørn Mork <bjorn@mork.no> 187 Contact: Bjørn Mork <bjorn@mork.no>
171 Description: 188 Description:
172 Some platforms provide usb por 189 Some platforms provide usb port physical location through
173 firmware. This is used by the 190 firmware. This is used by the kernel to pair up logical ports
174 mapping to the same physical c 191 mapping to the same physical connector. The attribute exposes the
175 raw location value as a hex in 192 raw location value as a hex integer.
176 193
177 194
178 What: /sys/bus/usb/devices/.../<hub_ !! 195 What: /sys/bus/usb/devices/.../(hub interface)/portX/quirks
179 Date: May 2018 196 Date: May 2018
180 Contact: Nicolas Boichat <drinkcat@chrom 197 Contact: Nicolas Boichat <drinkcat@chromium.org>
181 Description: 198 Description:
182 In some cases, we care about t 199 In some cases, we care about time-to-active for devices
183 connected on a specific port ( 200 connected on a specific port (e.g. non-standard USB port like
184 pogo pins), where the device t 201 pogo pins), where the device to be connected is known in
185 advance, and behaves well acco 202 advance, and behaves well according to the specification.
186 This attribute is a bit-field 203 This attribute is a bit-field that controls the behavior of
187 a specific port: 204 a specific port:
188 205
189 - Bit 0 of this field selects 206 - Bit 0 of this field selects the "old" enumeration scheme,
190 as it is considerably faste 207 as it is considerably faster (it only causes one USB reset
191 instead of 2). 208 instead of 2).
192 209
193 The old enumeration scheme 210 The old enumeration scheme can also be selected globally
194 using /sys/module/usbcore/p 211 using /sys/module/usbcore/parameters/old_scheme_first, but
195 it is often not desirable a 212 it is often not desirable as the new scheme was introduced to
196 increase compatibility with 213 increase compatibility with more devices.
197 - Bit 1 reduces TRSTRCY to th 214 - Bit 1 reduces TRSTRCY to the 10 ms that are required by the
198 USB 2.0 specification, inst 215 USB 2.0 specification, instead of the 50 ms that are normally
199 used to help make enumerati 216 used to help make enumeration work better on some high speed
200 devices. 217 devices.
201 218
202 What: /sys/bus/usb/devices/.../<hub_ !! 219 What: /sys/bus/usb/devices/.../(hub interface)/portX/over_current_count
203 Date: February 2018 220 Date: February 2018
204 Contact: Richard Leitner <richard.leitne 221 Contact: Richard Leitner <richard.leitner@skidata.com>
205 Description: 222 Description:
206 Most hubs are able to detect o 223 Most hubs are able to detect over-current situations on their
207 ports and report them to the k 224 ports and report them to the kernel. This attribute is to expose
208 the number of over-current sit 225 the number of over-current situation occurred on a specific port
209 to user space. This file will 226 to user space. This file will contain an unsigned 32 bit value
210 which wraps to 0 after its max 227 which wraps to 0 after its maximum is reached. This file supports
211 poll() for monitoring changes 228 poll() for monitoring changes to this value in user space.
212 229
213 Any time this value changes th 230 Any time this value changes the corresponding hub device will send a
214 udev event with the following 231 udev event with the following attributes::
215 232
216 OVER_CURRENT_PORT=/sys/bus/u !! 233 OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX
217 OVER_CURRENT_COUNT=[current 234 OVER_CURRENT_COUNT=[current value of this sysfs attribute]
218 235
219 What: /sys/bus/usb/devices/.../<hub_ !! 236 What: /sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
220 Date: November 2015 237 Date: November 2015
221 Contact: Lu Baolu <baolu.lu@linux.intel. 238 Contact: Lu Baolu <baolu.lu@linux.intel.com>
222 Description: 239 Description:
223 Some USB3.0 devices are not fr 240 Some USB3.0 devices are not friendly to USB3 LPM. usb3_lpm_permit
224 attribute allows enabling/disa 241 attribute allows enabling/disabling usb3 lpm of a port. It takes
225 effect both before and after a 242 effect both before and after a usb device is enumerated. Supported
226 values are "0" if both u1 and 243 values are "0" if both u1 and u2 are NOT permitted, "u1" if only u1
227 is permitted, "u2" if only u2 244 is permitted, "u2" if only u2 is permitted, "u1_u2" if both u1 and
228 u2 are permitted. 245 u2 are permitted.
229 246
230 What: /sys/bus/usb/devices/.../<hub_ <<
231 Date: December 2021 <<
232 Contact: Heikki Krogerus <heikki.krogeru <<
233 Description: <<
234 Link to the USB Type-C connect <<
235 only created when USB Type-C C <<
236 only if the system firmware is <<
237 connection between a port and <<
238 <<
239 What: /sys/bus/usb/devices/.../<hub_ <<
240 Date: June 2022 <<
241 Contact: Michael Grzeschik <m.grzeschik@ <<
242 Description: <<
243 This file controls the state o <<
244 Vbus power output (but only on <<
245 power switching -- most hubs d <<
246 a port is disabled, the port i <<
247 attached to the port will not <<
248 or enumerated. <<
249 <<
250 What: /sys/bus/usb/devices/.../<hub_ <<
251 Date: Sep 2022 <<
252 Contact: Ray Chi <raychi@google.com> <<
253 Description: <<
254 Some USB hosts have some watch <<
255 may enter ramdump if it takes <<
256 This attribute allows each por <<
257 port initialization will be fa <<
258 which is marked with early_sto <<
259 all future connections until t <<
260 <<
261 What: /sys/bus/usb/devices/.../<hub_ <<
262 Date: June 2023 <<
263 Contact: Roy Luo <royluo@google.com> <<
264 Description: <<
265 Indicates current state of the <<
266 Valid states are: 'not-attache <<
267 'reconnecting', 'unauthenticat <<
268 'configured', and 'suspended'. <<
269 monitor the state change from <<
270 <<
271 What: /sys/bus/usb/devices/.../power 247 What: /sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
272 Date: May 2013 248 Date: May 2013
273 Contact: Mathias Nyman <mathias.nyman@li 249 Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
274 Description: 250 Description:
275 USB 2.0 devices may support ha 251 USB 2.0 devices may support hardware link power management (LPM)
276 L1 sleep state. The usb2_lpm_l 252 L1 sleep state. The usb2_lpm_l1_timeout attribute allows
277 tuning the timeout for L1 inac 253 tuning the timeout for L1 inactivity timer (LPM timer), e.g.
278 needed inactivity time before 254 needed inactivity time before host requests the device to go to L1 sleep.
279 Useful for power management tu 255 Useful for power management tuning.
280 Supported values are 0 - 65535 256 Supported values are 0 - 65535 microseconds.
281 257
282 What: /sys/bus/usb/devices/.../power 258 What: /sys/bus/usb/devices/.../power/usb2_lpm_besl
283 Date: May 2013 259 Date: May 2013
284 Contact: Mathias Nyman <mathias.nyman@li 260 Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
285 Description: 261 Description:
286 USB 2.0 devices that support h 262 USB 2.0 devices that support hardware link power management (LPM)
287 L1 sleep state now use a best 263 L1 sleep state now use a best effort service latency value (BESL) to
288 indicate the best effort to re 264 indicate the best effort to resumption of service to the device after the
289 initiation of the resume event 265 initiation of the resume event.
290 If the device does not have a 266 If the device does not have a preferred besl value then the host can select
291 one instead. This usb2_lpm_bes 267 one instead. This usb2_lpm_besl attribute allows to tune the host selected besl
292 value in order to tune power s 268 value in order to tune power saving and service latency.
293 269
294 Supported values are 0 - 15. 270 Supported values are 0 - 15.
295 More information on how besl v 271 More information on how besl values map to microseconds can be found in
296 USB 2.0 ECN Errata for Link Po 272 USB 2.0 ECN Errata for Link Power Management, section 4.10)
297 273
298 What: /sys/bus/usb/devices/.../rx_la 274 What: /sys/bus/usb/devices/.../rx_lanes
299 Date: March 2018 275 Date: March 2018
300 Contact: Mathias Nyman <mathias.nyman@li 276 Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
301 Description: 277 Description:
302 Number of rx lanes the device 278 Number of rx lanes the device is using.
303 USB 3.2 adds Dual-lane support 279 USB 3.2 adds Dual-lane support, 2 rx and 2 tx lanes over Type-C.
304 Inter-Chip SSIC devices suppor 280 Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per
305 direction. Devices before USB 281 direction. Devices before USB 3.2 are single lane (rx_lanes = 1)
306 282
307 What: /sys/bus/usb/devices/.../tx_la 283 What: /sys/bus/usb/devices/.../tx_lanes
308 Date: March 2018 284 Date: March 2018
309 Contact: Mathias Nyman <mathias.nyman@li 285 Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
310 Description: 286 Description:
311 Number of tx lanes the device 287 Number of tx lanes the device is using.
312 USB 3.2 adds Dual-lane support 288 USB 3.2 adds Dual-lane support, 2 rx and 2 tx -lanes over Type-C.
313 Inter-Chip SSIC devices suppor 289 Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per
314 direction. Devices before USB 290 direction. Devices before USB 3.2 are single lane (tx_lanes = 1)
315 <<
316 What: /sys/bus/usb/devices/.../typec <<
317 Date: November 2023 <<
318 Contact: Heikki Krogerus <heikki.krogeru <<
319 Description: <<
320 Symlink to the USB Type-C part <<
321 represents the component that <<
322 Configuration Channel (CC sign <<
323 cables) with the local port. <<
324 <<
325 What: /sys/bus/usb/devices/usbX/bAlt <<
326 Description: <<
327 The current interface alternat <<
328 <<
329 See USB specs for its meaning. <<
330 <<
331 What: /sys/bus/usb/devices/usbX/bcdD <<
332 Description: <<
333 The device's release number, i <<
334 <<
335 See USB specs for its meaning. <<
336 <<
337 What: /sys/bus/usb/devices/usbX/bCon <<
338 Description: <<
339 While a USB device typically h <<
340 setting, some devices support <<
341 <<
342 This value shows the current c <<
343 <<
344 Changing its value will change <<
345 to another setting. <<
346 <<
347 The number of configurations s <<
348 <<
349 /sys/bus/usb/devices/u <<
350 <<
351 See USB specs for its meaning. <<
352 <<
353 What: /sys/bus/usb/devices/usbX/bDev <<
354 Description: <<
355 Class code of the device, in h <<
356 <<
357 See USB specs for its meaning. <<
358 <<
359 What: /sys/bus/usb/devices/usbX/bDev <<
360 Description: <<
361 Protocol code of the device, i <<
362 <<
363 See USB specs for its meaning. <<
364 <<
365 What: /sys/bus/usb/devices/usbX/bDev <<
366 Description: <<
367 Subclass code of the device, i <<
368 <<
369 See USB specs for its meaning. <<
370 <<
371 What: /sys/bus/usb/devices/usbX/bInt <<
372 Description: <<
373 Class code of the interface, i <<
374 <<
375 See USB specs for its meaning. <<
376 <<
377 What: /sys/bus/usb/devices/usbX/bInt <<
378 Description: <<
379 Interface number, in hexadecim <<
380 <<
381 See USB specs for its meaning. <<
382 <<
383 What: /sys/bus/usb/devices/usbX/bInt <<
384 Description: <<
385 Protocol code of the interface <<
386 <<
387 See USB specs for its meaning. <<
388 <<
389 What: /sys/bus/usb/devices/usbX/bInt <<
390 Description: <<
391 Subclass code of the interface <<
392 <<
393 See USB specs for its meaning. <<
394 <<
395 What: /sys/bus/usb/devices/usbX/bmAt <<
396 Description: <<
397 Attributes of the current conf <<
398 <<
399 See USB specs for its meaning. <<
400 <<
401 What: /sys/bus/usb/devices/usbX/bMax <<
402 Description: <<
403 Maximum endpoint 0 packet size <<
404 <<
405 See USB specs for its meaning. <<
406 <<
407 What: /sys/bus/usb/devices/usbX/bMax <<
408 Description: <<
409 Maximum power consumption of t <<
410 the device, in miliamperes. <<
411 <<
412 What: /sys/bus/usb/devices/usbX/bNum <<
413 Description: <<
414 Number of the possible configu <<
415 decimal. The current configura <<
416 <<
417 /sys/bus/usb/devices/u <<
418 <<
419 See USB specs for its meaning. <<
420 <<
421 What: /sys/bus/usb/devices/usbX/bNum <<
422 Description: <<
423 Number of endpoints used on th <<
424 <<
425 See USB specs for its meaning. <<
426 <<
427 What: /sys/bus/usb/devices/usbX/bNum <<
428 Description: <<
429 Number of interfaces on this d <<
430 <<
431 What: /sys/bus/usb/devices/usbX/busn <<
432 Description: <<
433 Number of the bus. <<
434 <<
435 What: /sys/bus/usb/devices/usbX/conf <<
436 Description: <<
437 Contents of the string descrip <<
438 current configuration. It may <<
439 of a device and/or its serial <<
440 <<
441 What: /sys/bus/usb/devices/usbX/desc <<
442 Description: <<
443 Contains the interface descrip <<
444 <<
445 What: /sys/bus/usb/devices/usbX/bos_ <<
446 Date: March 2024 <<
447 Contact: Elbert Mai <code@elbertmai.com> <<
448 Description: <<
449 Binary file containing the cac <<
450 of the device. This consists o <<
451 set of device capability descr <<
452 this file are in bus-endian fo <<
453 request the BOS from a device <<
454 <<
455 What: /sys/bus/usb/devices/usbX/idPr <<
456 Description: <<
457 Product ID, in hexadecimal. <<
458 <<
459 What: /sys/bus/usb/devices/usbX/idVe <<
460 Description: <<
461 Vendor ID, in hexadecimal. <<
462 <<
463 What: /sys/bus/usb/devices/usbX/devs <<
464 Description: <<
465 Displays the Device Tree Open <<
466 <<
467 What: /sys/bus/usb/devices/usbX/avoi <<
468 Description: <<
469 Most devices have this set to <<
470 <<
471 If the value is 1, enable a US <<
472 device to use reset. <<
473 <<
474 (read/write) <<
475 <<
476 What: /sys/bus/usb/devices/usbX/devn <<
477 Description: <<
478 USB interface device number, i <<
479 <<
480 What: /sys/bus/usb/devices/usbX/devp <<
481 Description: <<
482 String containing the USB inte <<
483 <<
484 What: /sys/bus/usb/devices/usbX/manu <<
485 Description: <<
486 Vendor specific string contain <<
487 manufacturer of the device. <<
488 <<
489 What: /sys/bus/usb/devices/usbX/maxc <<
490 Description: <<
491 Number of ports of an USB hub <<
492 <<
493 What: /sys/bus/usb/devices/usbX/pers <<
494 Description: <<
495 Keeps the device even if it ge <<
496 <<
497 What: /sys/bus/usb/devices/usbX/prod <<
498 Description: <<
499 Vendor specific string contain <<
500 device's product. <<
501 <<
502 What: /sys/bus/usb/devices/usbX/spee <<
503 Description: <<
504 Shows the device's max speed, <<
505 in Mbps. <<
506 Can be: <<
507 <<
508 ======= ====== <<
509 Unknown speed <<
510 1.5 Low sp <<
511 15 Full s <<
512 480 High S <<
513 5000 Super <<
514 10000 Super <<
515 20000 Super <<
516 ======= ====== <<
517 <<
518 What: /sys/bus/usb/devices/usbX/supp <<
519 Description: <<
520 Returns 1 if the device doesn' <<
521 Otherwise, returns 0. <<
522 <<
523 What: /sys/bus/usb/devices/usbX/urbn <<
524 Description: <<
525 Number of URBs submitted for t <<
526 <<
527 What: /sys/bus/usb/devices/usbX/vers <<
528 Description: <<
529 String containing the USB devi <<
530 at the BCD descriptor. <<
531 <<
532 What: /sys/bus/usb/devices/usbX/powe <<
533 Description: <<
534 Time in milliseconds for the d <<
535 value is negative, then autosu <<
536 <<
537 (read/write) <<
538 <<
539 What: /sys/bus/usb/devices/usbX/powe <<
540 Description: <<
541 The total time the device has <<
542 <<
543 What: /sys/bus/usb/devices/usbX/powe <<
544 Description: <<
545 The total time (in msec) that <<
546 <<
547 What: /sys/bus/usb/devices/usbX/powe <<
548 Description: <<
549 <<
550 What: /sys/bus/usb/devices/usbX/ep_< <<
551 Description: <<
552 The address of the endpoint de <<
553 in hexadecimal. The endpoint d <<
554 is also shown at: <<
555 <<
556 /sys/bus/usb/devices/u <<
557 <<
558 See USB specs for its meaning. <<
559 <<
560 What: /sys/bus/usb/devices/usbX/ep_< <<
561 Description: <<
562 The interval of the endpoint a <<
563 in hexadecimal. The actual int <<
564 of the USB. Also shown in time <<
565 /sys/bus/usb/devices/usbX/ep_< <<
566 <<
567 What: /sys/bus/usb/devices/usbX/ep_< <<
568 Description: <<
569 Number of bytes of the endpoin <<
570 <<
571 What: /sys/bus/usb/devices/usbX/ep_< <<
572 Description: <<
573 Attributes which apply to the <<
574 descriptor, in hexadecimal. Th <<
575 bitmapped field is also shown <<
576 <<
577 /sys/bus/usb/devices/u <<
578 <<
579 See USB specs for its meaning. <<
580 <<
581 What: /sys/bus/usb/devices/usbX/ep_< <<
582 Description: <<
583 Direction of the endpoint. Can <<
584 <<
585 - both (on control endpoin <<
586 - in <<
587 - out <<
588 <<
589 What: /sys/bus/usb/devices/usbX/ep_< <<
590 Description: <<
591 Interval for polling endpoint <<
592 milisseconds or microseconds. <<
593 <<
594 What: /sys/bus/usb/devices/usbX/ep_< <<
595 Description: <<
596 Descriptor type. Can be: <<
597 <<
598 - Control <<
599 - Isoc <<
600 - Bulk <<
601 - Interrupt <<
602 - unknown <<
603 <<
604 What: /sys/bus/usb/devices/usbX/ep_< <<
605 Description: <<
606 Maximum packet size this endpo <<
607 sending or receiving, in hexad <<
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.