1 What: /sys/class/regulator/.../state 1 What: /sys/class/regulator/.../state
2 Date: April 2008 2 Date: April 2008
3 KernelVersion: 2.6.26 3 KernelVersion: 2.6.26
4 Contact: Liam Girdwood <lrg@slimlogic.co 4 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
5 Description: 5 Description:
6 Some regulator directories wil 6 Some regulator directories will contain a field called
7 state. This reports the regula 7 state. This reports the regulator enable control, for
8 regulators which can report th 8 regulators which can report that input value.
9 9
10 This will be one of the follow 10 This will be one of the following strings:
11 11
12 'enabled' 12 'enabled'
13 'disabled' 13 'disabled'
14 'unknown' 14 'unknown'
15 15
16 'enabled' means the regulator 16 'enabled' means the regulator output is ON and is supplying
17 power to the system (assuming 17 power to the system (assuming no error prevents it).
18 18
19 'disabled' means the regulator 19 'disabled' means the regulator output is OFF and is not
20 supplying power to the system 20 supplying power to the system (unless some non-Linux
21 control has enabled it). 21 control has enabled it).
22 22
23 'unknown' means software canno 23 'unknown' means software cannot determine the state, or
24 the reported state is invalid. 24 the reported state is invalid.
25 25
26 NOTE: this field can be used i 26 NOTE: this field can be used in conjunction with microvolts
27 or microamps to determine conf 27 or microamps to determine configured regulator output levels.
28 28
29 29
30 What: /sys/class/regulator/.../statu 30 What: /sys/class/regulator/.../status
31 Description: 31 Description:
32 Some regulator directories wil 32 Some regulator directories will contain a field called
33 "status". This reports the cur 33 "status". This reports the current regulator status, for
34 regulators which can report th 34 regulators which can report that output value.
35 35
36 This will be one of the follow 36 This will be one of the following strings:
37 37
38 - off 38 - off
39 - on 39 - on
40 - error 40 - error
41 - fast 41 - fast
42 - normal 42 - normal
43 - idle 43 - idle
44 - standby 44 - standby
45 45
46 "off" means the regulator is n 46 "off" means the regulator is not supplying power to the
47 system. 47 system.
48 48
49 "on" means the regulator is su 49 "on" means the regulator is supplying power to the system,
50 and the regulator can't report 50 and the regulator can't report a detailed operation mode.
51 51
52 "error" indicates an out-of-re 52 "error" indicates an out-of-regulation status such as being
53 disabled due to thermal shutdo 53 disabled due to thermal shutdown, or voltage being unstable
54 because of problems with the i 54 because of problems with the input power supply.
55 55
56 "fast", "normal", "idle", and 56 "fast", "normal", "idle", and "standby" are all detailed
57 regulator operation modes (des 57 regulator operation modes (described elsewhere). They
58 imply "on", but provide more d 58 imply "on", but provide more detail.
59 59
60 Note that regulator status is 60 Note that regulator status is a function of many inputs,
61 not limited to control inputs 61 not limited to control inputs from Linux. For example,
62 the actual load presented may 62 the actual load presented may trigger "error" status; or
63 a regulator may be enabled by 63 a regulator may be enabled by another user, even though
64 Linux did not enable it. 64 Linux did not enable it.
65 65
66 66
67 What: /sys/class/regulator/.../type 67 What: /sys/class/regulator/.../type
68 Date: April 2008 68 Date: April 2008
69 KernelVersion: 2.6.26 69 KernelVersion: 2.6.26
70 Contact: Liam Girdwood <lrg@slimlogic.co 70 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
71 Description: 71 Description:
72 Each regulator directory will 72 Each regulator directory will contain a field called
73 type. This holds the regulator 73 type. This holds the regulator type.
74 74
75 This will be one of the follow 75 This will be one of the following strings:
76 76
77 - 'voltage' 77 - 'voltage'
78 - 'current' 78 - 'current'
79 - 'unknown' 79 - 'unknown'
80 80
81 'voltage' means the regulator 81 'voltage' means the regulator output voltage can be controlled
82 by software. 82 by software.
83 83
84 'current' means the regulator 84 'current' means the regulator output current limit can be
85 controlled by software. 85 controlled by software.
86 86
87 'unknown' means software canno 87 'unknown' means software cannot control either voltage or
88 current limit. 88 current limit.
89 89
90 90
91 What: /sys/class/regulator/.../micro 91 What: /sys/class/regulator/.../microvolts
92 Date: April 2008 92 Date: April 2008
93 KernelVersion: 2.6.26 93 KernelVersion: 2.6.26
94 Contact: Liam Girdwood <lrg@slimlogic.co 94 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
95 Description: 95 Description:
96 Some regulator directories wil 96 Some regulator directories will contain a field called
97 microvolts. This holds the reg 97 microvolts. This holds the regulator output voltage setting
98 measured in microvolts (i.e. E 98 measured in microvolts (i.e. E-6 Volts), for regulators
99 which can report the control i 99 which can report the control input for voltage.
100 100
101 NOTE: This value should not be 101 NOTE: This value should not be used to determine the regulator
102 output voltage level as this v 102 output voltage level as this value is the same regardless of
103 whether the regulator is enabl 103 whether the regulator is enabled or disabled.
104 104
105 105
106 What: /sys/class/regulator/.../micro 106 What: /sys/class/regulator/.../microamps
107 Date: April 2008 107 Date: April 2008
108 KernelVersion: 2.6.26 108 KernelVersion: 2.6.26
109 Contact: Liam Girdwood <lrg@slimlogic.co 109 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
110 Description: 110 Description:
111 Some regulator directories wil 111 Some regulator directories will contain a field called
112 microamps. This holds the regu 112 microamps. This holds the regulator output current limit
113 setting measured in microamps 113 setting measured in microamps (i.e. E-6 Amps), for regulators
114 which can report the control i 114 which can report the control input for a current limit.
115 115
116 NOTE: This value should not be 116 NOTE: This value should not be used to determine the regulator
117 output current level as this v 117 output current level as this value is the same regardless of
118 whether the regulator is enabl 118 whether the regulator is enabled or disabled.
119 119
120 120
121 What: /sys/class/regulator/.../opmod 121 What: /sys/class/regulator/.../opmode
122 Date: April 2008 122 Date: April 2008
123 KernelVersion: 2.6.26 123 KernelVersion: 2.6.26
124 Contact: Liam Girdwood <lrg@slimlogic.co 124 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
125 Description: 125 Description:
126 Some regulator directories wil 126 Some regulator directories will contain a field called
127 opmode. This holds the current 127 opmode. This holds the current regulator operating mode,
128 for regulators which can repor 128 for regulators which can report that control input value.
129 129
130 The opmode value can be one of 130 The opmode value can be one of the following strings:
131 131
132 - 'fast' 132 - 'fast'
133 - 'normal' 133 - 'normal'
134 - 'idle' 134 - 'idle'
135 - 'standby' 135 - 'standby'
136 - 'unknown' 136 - 'unknown'
137 137
138 The modes are described in inc 138 The modes are described in include/linux/regulator/consumer.h
139 139
140 NOTE: This value should not be 140 NOTE: This value should not be used to determine the regulator
141 output operating mode as this 141 output operating mode as this value is the same regardless of
142 whether the regulator is enabl 142 whether the regulator is enabled or disabled. A "status"
143 attribute may be available to 143 attribute may be available to determine the actual mode.
144 144
145 145
146 What: /sys/class/regulator/.../min_m 146 What: /sys/class/regulator/.../min_microvolts
147 Date: April 2008 147 Date: April 2008
148 KernelVersion: 2.6.26 148 KernelVersion: 2.6.26
149 Contact: Liam Girdwood <lrg@slimlogic.co 149 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
150 Description: 150 Description:
151 Some regulator directories wil 151 Some regulator directories will contain a field called
152 min_microvolts. This holds the 152 min_microvolts. This holds the minimum safe working regulator
153 output voltage setting for thi 153 output voltage setting for this domain measured in microvolts,
154 for regulators which support v 154 for regulators which support voltage constraints.
155 155
156 NOTE: this will return the str 156 NOTE: this will return the string 'constraint not defined' if
157 the power domain has no min mi 157 the power domain has no min microvolts constraint defined by
158 platform code. 158 platform code.
159 159
160 160
161 What: /sys/class/regulator/.../max_m 161 What: /sys/class/regulator/.../max_microvolts
162 Date: April 2008 162 Date: April 2008
163 KernelVersion: 2.6.26 163 KernelVersion: 2.6.26
164 Contact: Liam Girdwood <lrg@slimlogic.co 164 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
165 Description: 165 Description:
166 Some regulator directories wil 166 Some regulator directories will contain a field called
167 max_microvolts. This holds the 167 max_microvolts. This holds the maximum safe working regulator
168 output voltage setting for thi 168 output voltage setting for this domain measured in microvolts,
169 for regulators which support v 169 for regulators which support voltage constraints.
170 170
171 NOTE: this will return the str 171 NOTE: this will return the string 'constraint not defined' if
172 the power domain has no max mi 172 the power domain has no max microvolts constraint defined by
173 platform code. 173 platform code.
174 174
175 175
176 What: /sys/class/regulator/.../min_m 176 What: /sys/class/regulator/.../min_microamps
177 Date: April 2008 177 Date: April 2008
178 KernelVersion: 2.6.26 178 KernelVersion: 2.6.26
179 Contact: Liam Girdwood <lrg@slimlogic.co 179 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
180 Description: 180 Description:
181 Some regulator directories wil 181 Some regulator directories will contain a field called
182 min_microamps. This holds the 182 min_microamps. This holds the minimum safe working regulator
183 output current limit setting f 183 output current limit setting for this domain measured in
184 microamps, for regulators whic 184 microamps, for regulators which support current constraints.
185 185
186 NOTE: this will return the str 186 NOTE: this will return the string 'constraint not defined' if
187 the power domain has no min mi 187 the power domain has no min microamps constraint defined by
188 platform code. 188 platform code.
189 189
190 190
191 What: /sys/class/regulator/.../max_m 191 What: /sys/class/regulator/.../max_microamps
192 Date: April 2008 192 Date: April 2008
193 KernelVersion: 2.6.26 193 KernelVersion: 2.6.26
194 Contact: Liam Girdwood <lrg@slimlogic.co 194 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
195 Description: 195 Description:
196 Some regulator directories wil 196 Some regulator directories will contain a field called
197 max_microamps. This holds the 197 max_microamps. This holds the maximum safe working regulator
198 output current limit setting f 198 output current limit setting for this domain measured in
199 microamps, for regulators whic 199 microamps, for regulators which support current constraints.
200 200
201 NOTE: this will return the str 201 NOTE: this will return the string 'constraint not defined' if
202 the power domain has no max mi 202 the power domain has no max microamps constraint defined by
203 platform code. 203 platform code.
204 204
205 205
206 What: /sys/class/regulator/.../name 206 What: /sys/class/regulator/.../name
207 Date: October 2008 207 Date: October 2008
208 KernelVersion: 2.6.28 208 KernelVersion: 2.6.28
209 Contact: Liam Girdwood <lrg@slimlogic.co 209 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
210 Description: 210 Description:
211 Each regulator directory will 211 Each regulator directory will contain a field called
212 name. This holds a string iden 212 name. This holds a string identifying the regulator for
213 display purposes. 213 display purposes.
214 214
215 NOTE: this will be empty if no 215 NOTE: this will be empty if no suitable name is provided
216 by platform or regulator drive 216 by platform or regulator drivers.
217 217
218 218
219 What: /sys/class/regulator/.../num_u 219 What: /sys/class/regulator/.../num_users
220 Date: April 2008 220 Date: April 2008
221 KernelVersion: 2.6.26 221 KernelVersion: 2.6.26
222 Contact: Liam Girdwood <lrg@slimlogic.co 222 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
223 Description: 223 Description:
224 Each regulator directory will 224 Each regulator directory will contain a field called
225 num_users. This holds the numb 225 num_users. This holds the number of consumer devices that
226 have called regulator_enable() 226 have called regulator_enable() on this regulator.
227 227
228 228
229 What: /sys/class/regulator/.../reque 229 What: /sys/class/regulator/.../requested_microamps
230 Date: April 2008 230 Date: April 2008
231 KernelVersion: 2.6.26 231 KernelVersion: 2.6.26
232 Contact: Liam Girdwood <lrg@slimlogic.co 232 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
233 Description: 233 Description:
234 Some regulator directories wil 234 Some regulator directories will contain a field called
235 requested_microamps. This hold 235 requested_microamps. This holds the total requested load
236 current in microamps for this 236 current in microamps for this regulator from all its consumer
237 devices. 237 devices.
238 238
239 239
240 What: /sys/class/regulator/.../paren 240 What: /sys/class/regulator/.../parent
241 Date: April 2008 241 Date: April 2008
242 KernelVersion: 2.6.26 242 KernelVersion: 2.6.26
243 Contact: Liam Girdwood <lrg@slimlogic.co 243 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
244 Description: 244 Description:
245 Some regulator directories wil 245 Some regulator directories will contain a link called parent.
246 This points to the parent or s 246 This points to the parent or supply regulator if one exists.
247 247
248 What: /sys/class/regulator/.../suspe 248 What: /sys/class/regulator/.../suspend_mem_microvolts
249 Date: May 2008 249 Date: May 2008
250 KernelVersion: 2.6.26 250 KernelVersion: 2.6.26
251 Contact: Liam Girdwood <lrg@slimlogic.co 251 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
252 Description: 252 Description:
253 Some regulator directories wil 253 Some regulator directories will contain a field called
254 suspend_mem_microvolts. This h 254 suspend_mem_microvolts. This holds the regulator output
255 voltage setting for this domai 255 voltage setting for this domain measured in microvolts when
256 the system is suspended to mem 256 the system is suspended to memory, for voltage regulators
257 implementing suspend voltage c 257 implementing suspend voltage configuration constraints.
258 258
259 What: /sys/class/regulator/.../suspe 259 What: /sys/class/regulator/.../suspend_disk_microvolts
260 Date: May 2008 260 Date: May 2008
261 KernelVersion: 2.6.26 261 KernelVersion: 2.6.26
262 Contact: Liam Girdwood <lrg@slimlogic.co 262 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
263 Description: 263 Description:
264 Some regulator directories wil 264 Some regulator directories will contain a field called
265 suspend_disk_microvolts. This 265 suspend_disk_microvolts. This holds the regulator output
266 voltage setting for this domai 266 voltage setting for this domain measured in microvolts when
267 the system is suspended to dis 267 the system is suspended to disk, for voltage regulators
268 implementing suspend voltage c 268 implementing suspend voltage configuration constraints.
269 269
270 What: /sys/class/regulator/.../suspe 270 What: /sys/class/regulator/.../suspend_standby_microvolts
271 Date: May 2008 271 Date: May 2008
272 KernelVersion: 2.6.26 272 KernelVersion: 2.6.26
273 Contact: Liam Girdwood <lrg@slimlogic.co 273 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
274 Description: 274 Description:
275 Some regulator directories wil 275 Some regulator directories will contain a field called
276 suspend_standby_microvolts. Th 276 suspend_standby_microvolts. This holds the regulator output
277 voltage setting for this domai 277 voltage setting for this domain measured in microvolts when
278 the system is suspended to sta 278 the system is suspended to standby, for voltage regulators
279 implementing suspend voltage c 279 implementing suspend voltage configuration constraints.
280 280
281 What: /sys/class/regulator/.../suspe 281 What: /sys/class/regulator/.../suspend_mem_mode
282 Date: May 2008 282 Date: May 2008
283 KernelVersion: 2.6.26 283 KernelVersion: 2.6.26
284 Contact: Liam Girdwood <lrg@slimlogic.co 284 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
285 Description: 285 Description:
286 Some regulator directories wil 286 Some regulator directories will contain a field called
287 suspend_mem_mode. This holds t 287 suspend_mem_mode. This holds the regulator operating mode
288 setting for this domain when t 288 setting for this domain when the system is suspended to
289 memory, for regulators impleme 289 memory, for regulators implementing suspend mode
290 configuration constraints. 290 configuration constraints.
291 291
292 What: /sys/class/regulator/.../suspe 292 What: /sys/class/regulator/.../suspend_disk_mode
293 Date: May 2008 293 Date: May 2008
294 KernelVersion: 2.6.26 294 KernelVersion: 2.6.26
295 Contact: Liam Girdwood <lrg@slimlogic.co 295 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
296 Description: 296 Description:
297 Some regulator directories wil 297 Some regulator directories will contain a field called
298 suspend_disk_mode. This holds 298 suspend_disk_mode. This holds the regulator operating mode
299 setting for this domain when t 299 setting for this domain when the system is suspended to disk,
300 for regulators implementing su 300 for regulators implementing suspend mode configuration
301 constraints. 301 constraints.
302 302
303 What: /sys/class/regulator/.../suspe 303 What: /sys/class/regulator/.../suspend_standby_mode
304 Date: May 2008 304 Date: May 2008
305 KernelVersion: 2.6.26 305 KernelVersion: 2.6.26
306 Contact: Liam Girdwood <lrg@slimlogic.co 306 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
307 Description: 307 Description:
308 Some regulator directories wil 308 Some regulator directories will contain a field called
309 suspend_standby_mode. This hol 309 suspend_standby_mode. This holds the regulator operating mode
310 setting for this domain when t 310 setting for this domain when the system is suspended to
311 standby, for regulators implem 311 standby, for regulators implementing suspend mode
312 configuration constraints. 312 configuration constraints.
313 313
314 What: /sys/class/regulator/.../suspe 314 What: /sys/class/regulator/.../suspend_mem_state
315 Date: May 2008 315 Date: May 2008
316 KernelVersion: 2.6.26 316 KernelVersion: 2.6.26
317 Contact: Liam Girdwood <lrg@slimlogic.co 317 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
318 Description: 318 Description:
319 Some regulator directories wil 319 Some regulator directories will contain a field called
320 suspend_mem_state. This holds 320 suspend_mem_state. This holds the regulator operating state
321 when suspended to memory, for 321 when suspended to memory, for regulators implementing suspend
322 configuration constraints. 322 configuration constraints.
323 323
324 This will be one of the same s 324 This will be one of the same strings reported by
325 the "state" attribute. 325 the "state" attribute.
326 326
327 What: /sys/class/regulator/.../suspe 327 What: /sys/class/regulator/.../suspend_disk_state
328 Date: May 2008 328 Date: May 2008
329 KernelVersion: 2.6.26 329 KernelVersion: 2.6.26
330 Contact: Liam Girdwood <lrg@slimlogic.co 330 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
331 Description: 331 Description:
332 Some regulator directories wil 332 Some regulator directories will contain a field called
333 suspend_disk_state. This holds 333 suspend_disk_state. This holds the regulator operating state
334 when suspended to disk, for re 334 when suspended to disk, for regulators implementing
335 suspend configuration constrai 335 suspend configuration constraints.
336 336
337 This will be one of the same s 337 This will be one of the same strings reported by
338 the "state" attribute. 338 the "state" attribute.
339 339
340 What: /sys/class/regulator/.../suspe 340 What: /sys/class/regulator/.../suspend_standby_state
341 Date: May 2008 341 Date: May 2008
342 KernelVersion: 2.6.26 342 KernelVersion: 2.6.26
343 Contact: Liam Girdwood <lrg@slimlogic.co 343 Contact: Liam Girdwood <lrg@slimlogic.co.uk>
344 Description: 344 Description:
345 Some regulator directories wil 345 Some regulator directories will contain a field called
346 suspend_standby_state. This ho 346 suspend_standby_state. This holds the regulator operating
347 state when suspended to standb 347 state when suspended to standby, for regulators implementing
348 suspend configuration constrai 348 suspend configuration constraints.
349 349
350 This will be one of the same s 350 This will be one of the same strings reported by
351 the "state" attribute. 351 the "state" attribute.
352 352
353 What: /sys/class/regulator/.../bypas 353 What: /sys/class/regulator/.../bypass
354 Date: September 2012 354 Date: September 2012
355 KernelVersion: 3.7 355 KernelVersion: 3.7
356 Contact: Mark Brown <broonie@opensource. 356 Contact: Mark Brown <broonie@opensource.wolfsonmicro.com>
357 Description: 357 Description:
358 Some regulator directories wil 358 Some regulator directories will contain a field called
359 bypass. This indicates if the 359 bypass. This indicates if the device is in bypass mode.
360 360
361 This will be one of the follow 361 This will be one of the following strings:
362 362
363 - 'enabled' 363 - 'enabled'
364 - 'disabled' 364 - 'disabled'
365 - 'unknown' 365 - 'unknown'
366 366
367 'enabled' means the regulator 367 'enabled' means the regulator is in bypass mode.
368 368
369 'disabled' means that the regu 369 'disabled' means that the regulator is regulating.
370 370
371 'unknown' means software canno 371 'unknown' means software cannot determine the state, or
372 the reported state is invalid. 372 the reported state is invalid.
373 373
374 What: /sys/class/regulator/.../under 374 What: /sys/class/regulator/.../under_voltage
375 Date: April 2022 375 Date: April 2022
376 KernelVersion: 5.18 376 KernelVersion: 5.18
377 Contact: Zev Weiss <zev@bewilderbeest.ne 377 Contact: Zev Weiss <zev@bewilderbeest.net>
378 Description: 378 Description:
379 Some regulator directories wil 379 Some regulator directories will contain a field called
380 under_voltage. This indicates 380 under_voltage. This indicates if the device reports an
381 under-voltage fault (1) or not 381 under-voltage fault (1) or not (0).
382 382
383 What: /sys/class/regulator/.../over_ 383 What: /sys/class/regulator/.../over_current
384 Date: April 2022 384 Date: April 2022
385 KernelVersion: 5.18 385 KernelVersion: 5.18
386 Contact: Zev Weiss <zev@bewilderbeest.ne 386 Contact: Zev Weiss <zev@bewilderbeest.net>
387 Description: 387 Description:
388 Some regulator directories wil 388 Some regulator directories will contain a field called
389 over_current. This indicates 389 over_current. This indicates if the device reports an
390 over-current fault (1) or not 390 over-current fault (1) or not (0).
391 391
392 What: /sys/class/regulator/.../regul 392 What: /sys/class/regulator/.../regulation_out
393 Date: April 2022 393 Date: April 2022
394 KernelVersion: 5.18 394 KernelVersion: 5.18
395 Contact: Zev Weiss <zev@bewilderbeest.ne 395 Contact: Zev Weiss <zev@bewilderbeest.net>
396 Description: 396 Description:
397 Some regulator directories wil 397 Some regulator directories will contain a field called
398 regulation_out. This indicate 398 regulation_out. This indicates if the device reports an
399 out-of-regulation fault (1) or 399 out-of-regulation fault (1) or not (0).
400 400
401 What: /sys/class/regulator/.../fail 401 What: /sys/class/regulator/.../fail
402 Date: April 2022 402 Date: April 2022
403 KernelVersion: 5.18 403 KernelVersion: 5.18
404 Contact: Zev Weiss <zev@bewilderbeest.ne 404 Contact: Zev Weiss <zev@bewilderbeest.net>
405 Description: 405 Description:
406 Some regulator directories wil 406 Some regulator directories will contain a field called
407 fail. This indicates if the d 407 fail. This indicates if the device reports an output failure
408 (1) or not (0). 408 (1) or not (0).
409 409
410 What: /sys/class/regulator/.../over_ 410 What: /sys/class/regulator/.../over_temp
411 Date: April 2022 411 Date: April 2022
412 KernelVersion: 5.18 412 KernelVersion: 5.18
413 Contact: Zev Weiss <zev@bewilderbeest.ne 413 Contact: Zev Weiss <zev@bewilderbeest.net>
414 Description: 414 Description:
415 Some regulator directories wil 415 Some regulator directories will contain a field called
416 over_temp. This indicates if 416 over_temp. This indicates if the device reports an
417 over-temperature fault (1) or 417 over-temperature fault (1) or not (0).
418 418
419 What: /sys/class/regulator/.../under 419 What: /sys/class/regulator/.../under_voltage_warn
420 Date: April 2022 420 Date: April 2022
421 KernelVersion: 5.18 421 KernelVersion: 5.18
422 Contact: Zev Weiss <zev@bewilderbeest.ne 422 Contact: Zev Weiss <zev@bewilderbeest.net>
423 Description: 423 Description:
424 Some regulator directories wil 424 Some regulator directories will contain a field called
425 under_voltage_warn. This indi 425 under_voltage_warn. This indicates if the device reports an
426 under-voltage warning (1) or n 426 under-voltage warning (1) or not (0).
427 427
428 What: /sys/class/regulator/.../over_ 428 What: /sys/class/regulator/.../over_current_warn
429 Date: April 2022 429 Date: April 2022
430 KernelVersion: 5.18 430 KernelVersion: 5.18
431 Contact: Zev Weiss <zev@bewilderbeest.ne 431 Contact: Zev Weiss <zev@bewilderbeest.net>
432 Description: 432 Description:
433 Some regulator directories wil 433 Some regulator directories will contain a field called
434 over_current_warn. This indic 434 over_current_warn. This indicates if the device reports an
435 over-current warning (1) or no 435 over-current warning (1) or not (0).
436 436
437 What: /sys/class/regulator/.../over_ 437 What: /sys/class/regulator/.../over_voltage_warn
438 Date: April 2022 438 Date: April 2022
439 KernelVersion: 5.18 439 KernelVersion: 5.18
440 Contact: Zev Weiss <zev@bewilderbeest.ne 440 Contact: Zev Weiss <zev@bewilderbeest.net>
441 Description: 441 Description:
442 Some regulator directories wil 442 Some regulator directories will contain a field called
443 over_voltage_warn. This indic 443 over_voltage_warn. This indicates if the device reports an
444 over-voltage warning (1) or no 444 over-voltage warning (1) or not (0).
445 445
446 What: /sys/class/regulator/.../over_ 446 What: /sys/class/regulator/.../over_temp_warn
447 Date: April 2022 447 Date: April 2022
448 KernelVersion: 5.18 448 KernelVersion: 5.18
449 Contact: Zev Weiss <zev@bewilderbeest.ne 449 Contact: Zev Weiss <zev@bewilderbeest.net>
450 Description: 450 Description:
451 Some regulator directories wil 451 Some regulator directories will contain a field called
452 over_temp_warn. This indicate 452 over_temp_warn. This indicates if the device reports an
453 over-temperature warning (1) o 453 over-temperature warning (1) or not (0).
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.