1 Marvell Armada CP110 System Controller
2 ======================================
3
4 The CP110 is one of the two core HW blocks of
5 SoCs. It contains system controllers, which pr
6 giving access to numerous features: clocks, pi
7 SoC configuration items. This DT binding allow
8 system controllers.
9
10 For the top level node:
11 - compatible: must be: "syscon", "simple-mfd"
12 - reg: register area of the CP110 system cont
13
14 SYSTEM CONTROLLER 0
15 ===================
16
17 Clocks:
18 -------
19
20 The Device Tree node representing this System
21 number of clocks:
22
23 - a set of core clocks
24 - a set of gateable clocks
25
26 Those clocks can be referenced by other Device
27 cells:
28 - The first cell must be 0 or 1. 0 for the co
29 gateable clocks.
30 - The second cell identifies the particular c
31 clocks.
32
33 The following clocks are available:
34 - Core clocks
35 - 0 0 APLL
36 - 0 1 PPv2 core
37 - 0 2 EIP
38 - 0 3 Core
39 - 0 4 NAND core
40 - 0 5 SDIO core
41 - Gateable clocks
42 - 1 0 Audio
43 - 1 1 Comm Unit
44 - 1 2 NAND
45 - 1 3 PPv2
46 - 1 4 SDIO
47 - 1 5 MG Domain
48 - 1 6 MG Core
49 - 1 7 XOR1
50 - 1 8 XOR0
51 - 1 9 GOP DP
52 - 1 11 PCIe x1 0
53 - 1 12 PCIe x1 1
54 - 1 13 PCIe x4
55 - 1 14 PCIe / XOR
56 - 1 15 SATA
57 - 1 16 SATA USB
58 - 1 17 Main
59 - 1 18 SD/MMC/GOP
60 - 1 21 Slow IO (SPI, NOR, BootROM, I2
61 - 1 22 USB3H0
62 - 1 23 USB3H1
63 - 1 24 USB3 Device
64 - 1 25 EIP150
65 - 1 26 EIP197
66
67 Required properties:
68
69 - compatible: must be:
70 "marvell,cp110-clock"
71 - #clock-cells: must be set to 2
72
73 Pinctrl:
74 --------
75
76 For common binding part and usage, refer to th
77 Documentation/devicetree/bindings/pinctrl/marv
78
79 Required properties:
80
81 - compatible: "marvell,armada-7k-pinctrl", "ma
82 "marvell,armada-8k-cps-pinctrl" or "marvell,
83 depending on the specific variant of the SoC
84
85 Available mpp pins/groups and functions:
86 Note: brackets (x) are not part of the mpp nam
87 only for more detailed description in this doc
88
89 name pins functions
90 ==============================================
91 mpp0 0 gpio, dev(ale1), au(i2smclk),
92 mpp1 1 gpio, dev(ale0), au(i2sdo_spdi
93 mpp2 2 gpio, dev(ad15), au(i2sextclk)
94 mpp3 3 gpio, dev(ad14), au(i2slrclk),
95 mpp4 4 gpio, dev(ad13), au(i2sbclk),
96 mpp5 5 gpio, dev(ad12), au(i2sdi), ge
97 mpp6 6 gpio, dev(ad11), ge0(txd3), sp
98 mpp7 7 gpio, dev(ad10), ge0(txd2), sp
99 mpp8 8 gpio, dev(ad9), ge0(txd1), spi
100 mpp9 9 gpio, dev(ad8), ge0(txd0), spi
101 mpp10 10 gpio, dev(readyn), ge0(txctl),
102 mpp11 11 gpio, dev(wen1), ge0(txclkout)
103 mpp12 12 gpio, dev(clk_out), nf(rbn1),
104 mpp13 13 gpio, dev(burstn), nf(rbn0), s
105 mpp14 14 gpio, dev(bootcsn), dev(csn0),
106 mpp15 15 gpio, dev(ad7), spi1(mosi), sp
107 mpp16 16 gpio, dev(ad6), spi1(clk), mss
108 mpp17 17 gpio, dev(ad5), ge0(txd3)
109 mpp18 18 gpio, dev(ad4), ge0(txd2), ptp
110 mpp19 19 gpio, dev(ad3), ge0(txd1), wak
111 mpp20 20 gpio, dev(ad2), ge0(txd0)
112 mpp21 21 gpio, dev(ad1), ge0(txctl), se
113 mpp22 22 gpio, dev(ad0), ge0(txclkout),
114 mpp23 23 gpio, dev(a1), au(i2smclk), li
115 mpp24 24 gpio, dev(a0), au(i2slrclk)
116 mpp25 25 gpio, dev(oen), au(i2sdo_spdif
117 mpp26 26 gpio, dev(wen0), au(i2sbclk)
118 mpp27 27 gpio, dev(csn0), spi1(miso), m
119 mpp28 28 gpio, dev(csn1), spi1(csn0), m
120 mpp29 29 gpio, dev(csn2), spi1(mosi), m
121 mpp30 30 gpio, dev(csn3), spi1(clk), ms
122 mpp31 31 gpio, dev(a2), mss_gpio4, pcie
123 mpp32 32 gpio, mii(col), mii(txerr), ms
124 mpp33 33 gpio, mii(txclk), sdio(pwr10),
125 mpp34 34 gpio, mii(rxerr), sdio(pwr11),
126 mpp35 35 gpio, sata1(present_act), i2c1
127 mpp36 36 gpio, synce2(clk), i2c1(sck),
128 mpp37 37 gpio, uart2(rxd), i2c0(sck), p
129 mpp38 38 gpio, uart2(txd), i2c0(sda), p
130 mpp39 39 gpio, sdio(wr_protect), au(i2s
131 mpp40 40 gpio, sdio(pwr11), synce1(clk)
132 mpp41 41 gpio, sdio(pwr10), sdio(bus_pw
133 mpp42 42 gpio, sdio(v18_en), sdio(wr_pr
134 mpp43 43 gpio, sdio(card_detect), synce
135 mpp44 44 gpio, ge1(txd2), uart0(rts), p
136 mpp45 45 gpio, ge1(txd3), uart0(txd), p
137 mpp46 46 gpio, ge1(txd1), uart1(rts)
138 mpp47 47 gpio, ge1(txd0), spi1(clk), ua
139 mpp48 48 gpio, ge1(txctl_txen), spi1(mo
140 mpp49 49 gpio, ge1(txclkout), mii(crs),
141 mpp50 50 gpio, ge1(rxclk), mss_i2c(sda)
142 mpp51 51 gpio, ge1(rxd0), mss_i2c(sck),
143 mpp52 52 gpio, ge1(rxd1), synce1(clk),
144 mpp53 53 gpio, ge1(rxd2), ptp(clk), spi
145 mpp54 54 gpio, ge1(rxd3), synce2(clk),
146 mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pul
147 mpp56 56 gpio, tdm(drx), au(i2sdo_spdif
148 mpp57 57 gpio, mss_i2c(sda), ptp(pclk_o
149 mpp58 58 gpio, mss_i2c(sck), ptp(clk),
150 mpp59 59 gpio, mss_gpio7, synce2(clk),
151 mpp60 60 gpio, mss_gpio6, ptp(pulse), t
152 mpp61 61 gpio, mss_gpio5, ptp(clk), tdm
153 mpp62 62 gpio, mss_gpio4, synce1(clk),
154
155 GPIO:
156 -----
157
158 For common binding part and usage, refer to
159 Documentation/devicetree/bindings/gpio/gpio-mv
160
161 Required properties:
162
163 - compatible: "marvell,armada-8k-gpio"
164
165 - offset: offset address inside the syscon blo
166
167 Example:
168
169 CP110_LABEL(syscon0): system-controller@440000
170 compatible = "syscon", "simple-mfd";
171 reg = <0x440000 0x1000>;
172
173 CP110_LABEL(clk): clock {
174 compatible = "marvell,cp110-cl
175 #clock-cells = <2>;
176 };
177
178 CP110_LABEL(pinctrl): pinctrl {
179 compatible = "marvell,armada-8
180 };
181
182 CP110_LABEL(gpio1): gpio@100 {
183 compatible = "marvell,armada-8
184 offset = <0x100>;
185 ngpios = <32>;
186 gpio-controller;
187 #gpio-cells = <2>;
188 gpio-ranges = <&CP110_LABEL(pi
189 };
190
191 };
192
193 SYSTEM CONTROLLER 1
194 ===================
195
196 Thermal:
197 --------
198
199 The thermal IP can probe the temperature all a
200 may feature several channels, each of them wir
201
202 It is possible to setup an overheat interrupt
203 critical point to any subnode of the thermal-z
204
205 For common binding part and usage, refer to
206 Documentation/devicetree/bindings/thermal/ther
207
208 Required properties:
209 - compatible: must be one of:
210 * marvell,armada-cp110-thermal
211 - reg: register range associated with the ther
212
213 Optional properties:
214 - interrupts-extended: overheat interrupt hand
215 a line of the ICU-SEI irqchip (116 is what i
216 firmware). The ICU-SEI will redirect towards
217 AP SEI which is shared across all CPs.
218 See interrupt-controller/interrupts.txt
219 - #thermal-sensor-cells: shall be <1> when the
220 to this IP and represents the channel ID. Th
221 channel. O refers to the thermal IP internal
222
223 Example:
224 CP110_LABEL(syscon1): system-controller@6f8000
225 compatible = "syscon", "simple-mfd";
226 reg = <0x6f8000 0x1000>;
227
228 CP110_LABEL(thermal): thermal-sensor@7
229 compatible = "marvell,armada-c
230 reg = <0x70 0x10>;
231 interrupts-extended = <&CP110_
232 #thermal-sensor-cells = <1>;
233 };
234 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.