1 Drivers for the second video output of the GE 1 Drivers for the second video output of the GE B850v3:
2 STDP4028-ge-b850v3-fw bridges (LVDS-DP) 2 STDP4028-ge-b850v3-fw bridges (LVDS-DP)
3 STDP2690-ge-b850v3-fw bridges (DP-DP++) 3 STDP2690-ge-b850v3-fw bridges (DP-DP++)
4 4
5 The video processing pipeline on the second ou 5 The video processing pipeline on the second output on the GE B850v3:
6 6
7 Host -> LVDS|--(STDP4028)--|DP -> DP|--(STD 7 Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
8 8
9 Each bridge has a dedicated flash containing f 9 Each bridge has a dedicated flash containing firmware for supporting the custom
10 design. The result is that, in this design, ne 10 design. The result is that, in this design, neither the STDP4028 nor the
11 STDP2690 behave as the stock bridges would. Th 11 STDP2690 behave as the stock bridges would. The compatible strings include the
12 suffix "-ge-b850v3-fw" to make it clear that t 12 suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
13 the firmware specific for the GE B850v3. 13 the firmware specific for the GE B850v3.
14 14
15 The hardware do not provide control over the v 15 The hardware do not provide control over the video processing pipeline, as the
16 two bridges behaves as a single one. The only 16 two bridges behaves as a single one. The only interfaces exposed by the
17 hardware are EDID, HPD, and interrupts. 17 hardware are EDID, HPD, and interrupts.
18 18
19 stdp4028-ge-b850v3-fw required properties: 19 stdp4028-ge-b850v3-fw required properties:
20 - compatible : "megachips,stdp4028-ge-b850v3 20 - compatible : "megachips,stdp4028-ge-b850v3-fw"
21 - reg : I2C bus address 21 - reg : I2C bus address
>> 22 - interrupt-parent : phandle of the interrupt controller that services
>> 23 interrupts to the device
22 - interrupts : one interrupt should be descr 24 - interrupts : one interrupt should be described here, as in
23 <0 IRQ_TYPE_LEVEL_HIGH> 25 <0 IRQ_TYPE_LEVEL_HIGH>
24 - ports : One input port(reg = <0>) and one 26 - ports : One input port(reg = <0>) and one output port(reg = <1>)
25 27
26 stdp2690-ge-b850v3-fw required properties: 28 stdp2690-ge-b850v3-fw required properties:
27 compatible : "megachips,stdp2690-ge-b850v3 29 compatible : "megachips,stdp2690-ge-b850v3-fw"
28 - reg : I2C bus address 30 - reg : I2C bus address
29 - ports : One input port(reg = <0>) and one 31 - ports : One input port(reg = <0>) and one output port(reg = <1>)
30 32
31 Example: 33 Example:
32 34
33 &mux2_i2c2 { 35 &mux2_i2c2 {
34 clock-frequency = <100000>; 36 clock-frequency = <100000>;
35 37
36 stdp4028@73 { 38 stdp4028@73 {
37 compatible = "megachips,stdp40 39 compatible = "megachips,stdp4028-ge-b850v3-fw";
38 #address-cells = <1>; 40 #address-cells = <1>;
39 #size-cells = <0>; 41 #size-cells = <0>;
40 42
41 reg = <0x73>; 43 reg = <0x73>;
42 44
43 interrupt-parent = <&gpio2>; 45 interrupt-parent = <&gpio2>;
44 interrupts = <0 IRQ_TYPE_LEVEL 46 interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
45 47
46 ports { 48 ports {
47 #address-cells = <1>; 49 #address-cells = <1>;
48 #size-cells = <0>; 50 #size-cells = <0>;
49 51
50 port@0 { 52 port@0 {
51 reg = <0>; 53 reg = <0>;
52 stdp4028_in: e 54 stdp4028_in: endpoint {
53 remote 55 remote-endpoint = <&lvds0_out>;
54 }; 56 };
55 }; 57 };
56 port@1 { 58 port@1 {
57 reg = <1>; 59 reg = <1>;
58 stdp4028_out: 60 stdp4028_out: endpoint {
59 remote 61 remote-endpoint = <&stdp2690_in>;
60 }; 62 };
61 }; 63 };
62 }; 64 };
63 }; 65 };
64 66
65 stdp2690@72 { 67 stdp2690@72 {
66 compatible = "megachips,stdp26 68 compatible = "megachips,stdp2690-ge-b850v3-fw";
67 #address-cells = <1>; 69 #address-cells = <1>;
68 #size-cells = <0>; 70 #size-cells = <0>;
69 71
70 reg = <0x72>; 72 reg = <0x72>;
71 73
72 ports { 74 ports {
73 #address-cells = <1>; 75 #address-cells = <1>;
74 #size-cells = <0>; 76 #size-cells = <0>;
75 77
76 port@0 { 78 port@0 {
77 reg = <0>; 79 reg = <0>;
78 stdp2690_in: e 80 stdp2690_in: endpoint {
79 remote 81 remote-endpoint = <&stdp4028_out>;
80 }; 82 };
81 }; 83 };
82 84
83 port@1 { 85 port@1 {
84 reg = <1>; 86 reg = <1>;
85 stdp2690_out: 87 stdp2690_out: endpoint {
86 /* Con 88 /* Connector for external display */
87 }; 89 };
88 }; 90 };
89 }; 91 };
90 }; 92 };
91 }; 93 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.