1 # SPDX-License-Identifier: (GPL-2.0-only OR BS 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2 %YAML 1.2 2 %YAML 1.2
3 --- 3 ---
4 $id: http://devicetree.org/schemas/mailbox/arm 4 $id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml#
5 $schema: http://devicetree.org/meta-schemas/co 5 $schema: http://devicetree.org/meta-schemas/core.yaml#
6 6
7 title: ARM MHU Mailbox Controller 7 title: ARM MHU Mailbox Controller
8 8
9 maintainers: 9 maintainers:
10 - Jassi Brar <jaswinder.singh@linaro.org> 10 - Jassi Brar <jaswinder.singh@linaro.org>
11 11
12 description: | 12 description: |
13 The ARM's Message-Handling-Unit (MHU) is a m 13 The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3
14 independent channels/links to communicate wi 14 independent channels/links to communicate with remote processor(s). MHU links
15 are hardwired on a platform. A link raises i 15 are hardwired on a platform. A link raises interrupt for any received data.
16 However, there is no specified way of knowin 16 However, there is no specified way of knowing if the sent data has been read
17 by the remote. This driver assumes the sende 17 by the remote. This driver assumes the sender polls STAT register and the
18 remote clears it after having read the data. 18 remote clears it after having read the data. The last channel is specified to
19 be a 'Secure' resource, hence can't be used 19 be a 'Secure' resource, hence can't be used by Linux running NS.
20 20
21 The MHU hardware also allows operations in d 21 The MHU hardware also allows operations in doorbell mode. The MHU drives the
22 interrupt signal using a 32-bit register, wi 22 interrupt signal using a 32-bit register, with all 32-bits logically ORed
23 together. It provides a set of registers to 23 together. It provides a set of registers to enable software to set, clear and
24 check the status of each of the bits of this 24 check the status of each of the bits of this register independently. The use
25 of 32 bits per interrupt line enables softwa 25 of 32 bits per interrupt line enables software to provide more information
26 about the source of the interrupt. For examp 26 about the source of the interrupt. For example, each bit of the register can
27 be associated with a type of event that can 27 be associated with a type of event that can contribute to raising the
28 interrupt. Each of the 32-bits can be used a 28 interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote
29 processor. 29 processor.
30 30
31 # We need a select here so we don't match all 31 # We need a select here so we don't match all nodes with 'arm,primecell'
32 select: 32 select:
33 properties: 33 properties:
34 compatible: 34 compatible:
35 contains: 35 contains:
36 enum: 36 enum:
37 - arm,mhu 37 - arm,mhu
38 - arm,mhu-doorbell 38 - arm,mhu-doorbell
39 required: 39 required:
40 - compatible 40 - compatible
41 41
42 properties: 42 properties:
43 compatible: 43 compatible:
44 oneOf: 44 oneOf:
45 - description: Data transfer mode 45 - description: Data transfer mode
46 items: 46 items:
47 - const: arm,mhu 47 - const: arm,mhu
48 - const: arm,primecell 48 - const: arm,primecell
49 49
50 - description: Doorbell mode 50 - description: Doorbell mode
51 items: 51 items:
52 - const: arm,mhu-doorbell 52 - const: arm,mhu-doorbell
53 - const: arm,primecell 53 - const: arm,primecell
54 54
55 55
56 reg: 56 reg:
57 maxItems: 1 57 maxItems: 1
58 58
59 interrupts: 59 interrupts:
60 minItems: 2 <<
61 items: 60 items:
62 - description: low-priority non-secure 61 - description: low-priority non-secure
63 - description: high-priority non-secure 62 - description: high-priority non-secure
64 - description: Secure 63 - description: Secure
>> 64 maxItems: 3
65 65
66 clocks: 66 clocks:
67 maxItems: 1 67 maxItems: 1
68 68
69 clock-names: 69 clock-names:
70 items: 70 items:
71 - const: apb_pclk 71 - const: apb_pclk
72 72
73 '#mbox-cells': 73 '#mbox-cells':
74 description: | 74 description: |
75 Set to 1 in data transfer mode and repre 75 Set to 1 in data transfer mode and represents index of the channel.
76 Set to 2 in doorbell mode and represents 76 Set to 2 in doorbell mode and represents index of the channel and doorbell
77 number. 77 number.
78 enum: [ 1, 2 ] 78 enum: [ 1, 2 ]
79 79
80 required: 80 required:
81 - compatible 81 - compatible
82 - reg 82 - reg
83 - interrupts 83 - interrupts
84 - '#mbox-cells' 84 - '#mbox-cells'
85 85
86 additionalProperties: false 86 additionalProperties: false
87 87
88 examples: 88 examples:
89 # Data transfer mode. 89 # Data transfer mode.
90 - | 90 - |
91 soc { 91 soc {
92 #address-cells = <2>; 92 #address-cells = <2>;
93 #size-cells = <2>; 93 #size-cells = <2>;
94 94
95 mhuA: mailbox@2b1f0000 { 95 mhuA: mailbox@2b1f0000 {
96 #mbox-cells = <1>; 96 #mbox-cells = <1>;
97 compatible = "arm,mhu", "arm,prime 97 compatible = "arm,mhu", "arm,primecell";
98 reg = <0 0x2b1f0000 0 0x1000>; 98 reg = <0 0x2b1f0000 0 0x1000>;
99 interrupts = <0 36 4>, /* LP-NonSe 99 interrupts = <0 36 4>, /* LP-NonSecure */
100 <0 35 4>, /* HP-NonSe 100 <0 35 4>, /* HP-NonSecure */
101 <0 37 4>; /* Secure * 101 <0 37 4>; /* Secure */
102 clocks = <&clock 0 2 1>; 102 clocks = <&clock 0 2 1>;
103 clock-names = "apb_pclk"; 103 clock-names = "apb_pclk";
104 }; 104 };
105 }; <<
106 105
107 firmware { !! 106 mhu_client_scb: scb@2e000000 {
108 scpi { !! 107 compatible = "fujitsu,mb86s70-scb-1.0";
109 compatible = "arm,scpi"; !! 108 reg = <0 0x2e000000 0 0x4000>;
110 mboxes = <&mhuA 1>; /* HP-NonSecur 109 mboxes = <&mhuA 1>; /* HP-NonSecure */
111 shmem = <&cpu_scp_hpri>; /* HP-Non <<
112 <<
113 scpi_devpd: power-controller { <<
114 compatible = "arm,scpi-power-d <<
115 num-domains = <2>; <<
116 #power-domain-cells = <1>; <<
117 }; <<
118 }; 110 };
119 }; 111 };
120 112
121 # Doorbell mode. 113 # Doorbell mode.
122 - | 114 - |
123 soc { 115 soc {
124 #address-cells = <2>; 116 #address-cells = <2>;
125 #size-cells = <2>; 117 #size-cells = <2>;
126 118
127 mhuB: mailbox@2b2f0000 { 119 mhuB: mailbox@2b2f0000 {
128 #mbox-cells = <2>; 120 #mbox-cells = <2>;
129 compatible = "arm,mhu-doorbell", " 121 compatible = "arm,mhu-doorbell", "arm,primecell";
130 reg = <0 0x2b2f0000 0 0x1000>; 122 reg = <0 0x2b2f0000 0 0x1000>;
131 interrupts = <0 36 4>, /* LP-NonSe 123 interrupts = <0 36 4>, /* LP-NonSecure */
132 <0 35 4>, /* HP-NonSe 124 <0 35 4>, /* HP-NonSecure */
133 <0 37 4>; /* Secure * 125 <0 37 4>; /* Secure */
134 clocks = <&clock 0 2 1>; 126 clocks = <&clock 0 2 1>;
135 clock-names = "apb_pclk"; 127 clock-names = "apb_pclk";
136 }; 128 };
137 }; <<
138 129
139 firmware { !! 130 mhu_client_scpi: scpi@2f000000 {
140 scmi { !! 131 compatible = "arm,scpi";
141 compatible = "arm,scmi"; !! 132 reg = <0 0x2f000000 0 0x200>;
142 mboxes = <&mhuB 0 0>, /* LP-NonSec !! 133 mboxes = <&mhuB 1 4>; /* HP-NonSecure, 5th doorbell */
143 <&mhuB 0 1>; /* LP-NonSec <<
144 mbox-names = "tx", "rx"; <<
145 shmem = <&cpu_scp_lpri0>, <<
146 <&cpu_scp_lpri1>; <<
147 <<
148 #address-cells = <1>; <<
149 #size-cells = <0>; <<
150 <<
151 scmi_devpd: protocol@11 { <<
152 reg = <0x11>; <<
153 #power-domain-cells = <1>; <<
154 }; <<
155 <<
156 scmi_dvfs: protocol@13 { <<
157 reg = <0x13>; <<
158 #clock-cells = <1>; <<
159 <<
160 mboxes = <&mhuB 1 2>, /* HP-No <<
161 <&mhuB 1 3>; /* HP-No <<
162 mbox-names = "tx", "rx"; <<
163 shmem = <&cpu_scp_hpri0>, <<
164 <&cpu_scp_hpri1>; <<
165 }; <<
166 }; 134 };
167 }; 135 };
168 <<
169 ... <<
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.