1 Micrel PHY properties.
2
3 These properties cover the base properties Mic
4
5 Optional properties:
6
7 - micrel,led-mode : LED mode value to set for
8
9 Configure the LED mode with single val
10 bits that are currently supported:
11
12 KSZ8001: register 0x1e, bits 15..14
13 KSZ8041: register 0x1e, bits 15..14
14 KSZ8021: register 0x1f, bits 5..4
15 KSZ8031: register 0x1f, bits 5..4
16 KSZ8051: register 0x1f, bits 5..4
17 KSZ8081: register 0x1f, bits 5..4
18 KSZ8091: register 0x1f, bits 5..4
19 LAN8814: register EP5.0, bit 6
20
21 See the respective PHY datasheet for t
22
23 - micrel,rmii-reference-clock-select-25-mhz:
24
25
26 Setting the RMII Reference Clock Selec
27 than 50 MHz clock mode.
28
29 Note that this option in only needed f
30 non-standard, inverted function of thi
31 Specifically, a clock reference ("rmii
32 actually select a mode.
33
34 - clocks, clock-names: contains clocks accord
35
36 supported clocks:
37 - KSZ8021, KSZ8031, KSZ8081, KSZ8091:
38 input clock. Used to determine the X
39
40 - micrel,fiber-mode: If present the PHY is co
41
42 Some PHYs, such as the KSZ8041FTL vari
43 by the FXEN boot strapping pin. It can
44 registers whether the PHY is in fiber
45 property can be used to describe it.
46
47 In fiber mode, auto-negotiation is dis
48 100base-fx (full and half duplex) mode
49
50 - coma-mode-gpios: If present the given gpio
51 PHY is probed.
52
53 Some PHYs have a COMA mode input pin w
54 isolate and power-down mode. On some b
55 to a GPIO of the SoC.
56
57 Supported on the LAN8814.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.