1 * NI XGE Ethernet controller 1 * NI XGE Ethernet controller
2 2
3 Required properties: 3 Required properties:
4 - compatible: Should be "ni,xge-enet-3.00", bu 4 - compatible: Should be "ni,xge-enet-3.00", but can be "ni,xge-enet-2.00" for
5 older device trees with DMA engi 5 older device trees with DMA engines co-located in the address map,
6 with the one reg entry to descri 6 with the one reg entry to describe the whole device.
7 - reg: Address and length of the register set 7 - reg: Address and length of the register set for the device. It contains the
8 information of registers in the same or 8 information of registers in the same order as described by reg-names.
9 - reg-names: Should contain the reg names 9 - reg-names: Should contain the reg names
10 "dma": DMA engine control and status 10 "dma": DMA engine control and status region
11 "ctrl": MDIO and PHY control and statu 11 "ctrl": MDIO and PHY control and status region
12 - interrupts: Should contain tx and rx interru 12 - interrupts: Should contain tx and rx interrupt
13 - interrupt-names: Should be "rx" and "tx" 13 - interrupt-names: Should be "rx" and "tx"
14 - phy-mode: See ethernet.txt file in the same 14 - phy-mode: See ethernet.txt file in the same directory.
15 - nvmem-cells: Phandle of nvmem cell containin 15 - nvmem-cells: Phandle of nvmem cell containing the MAC address
16 - nvmem-cell-names: Should be "address" 16 - nvmem-cell-names: Should be "address"
17 17
18 Optional properties: 18 Optional properties:
19 - mdio subnode to indicate presence of MDIO co 19 - mdio subnode to indicate presence of MDIO controller
20 - fixed-link : Assume a fixed link. See fixed- 20 - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
21 Use instead of phy-handle. 21 Use instead of phy-handle.
22 - phy-handle: See ethernet.txt file in the sam 22 - phy-handle: See ethernet.txt file in the same directory.
23 23
24 Examples (10G generic PHY): 24 Examples (10G generic PHY):
25 nixge0: ethernet@40000000 { 25 nixge0: ethernet@40000000 {
26 compatible = "ni,xge-enet-3.00 26 compatible = "ni,xge-enet-3.00";
27 reg = <0x40000000 0x4000 27 reg = <0x40000000 0x4000
28 0x41002000 0x2000>; 28 0x41002000 0x2000>;
29 reg-names = "dma", "ctrl"; 29 reg-names = "dma", "ctrl";
30 30
31 nvmem-cells = <ð1_addr>; 31 nvmem-cells = <ð1_addr>;
32 nvmem-cell-names = "address"; 32 nvmem-cell-names = "address";
33 33
34 interrupts = <0 29 IRQ_TYPE_LE 34 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
35 interrupt-names = "rx", "tx"; 35 interrupt-names = "rx", "tx";
36 interrupt-parent = <&intc>; 36 interrupt-parent = <&intc>;
37 37
38 phy-mode = "xgmii"; 38 phy-mode = "xgmii";
39 phy-handle = <ðernet_phy1>; 39 phy-handle = <ðernet_phy1>;
40 40
41 mdio { 41 mdio {
42 ethernet_phy1: etherne 42 ethernet_phy1: ethernet-phy@4 {
43 compatible = " 43 compatible = "ethernet-phy-ieee802.3-c45";
44 reg = <4>; 44 reg = <4>;
45 }; 45 };
46 }; 46 };
47 }; 47 };
48 48
49 Examples (10G generic PHY, no MDIO): 49 Examples (10G generic PHY, no MDIO):
50 nixge0: ethernet@40000000 { 50 nixge0: ethernet@40000000 {
51 compatible = "ni,xge-enet-2.00 51 compatible = "ni,xge-enet-2.00";
52 reg = <0x40000000 0x6000>; 52 reg = <0x40000000 0x6000>;
53 53
54 nvmem-cells = <ð1_addr>; 54 nvmem-cells = <ð1_addr>;
55 nvmem-cell-names = "address"; 55 nvmem-cell-names = "address";
56 56
57 interrupts = <0 29 IRQ_TYPE_LE 57 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
58 interrupt-names = "rx", "tx"; 58 interrupt-names = "rx", "tx";
59 interrupt-parent = <&intc>; 59 interrupt-parent = <&intc>;
60 60
61 phy-mode = "xgmii"; 61 phy-mode = "xgmii";
62 phy-handle = <ðernet_phy1>; 62 phy-handle = <ðernet_phy1>;
63 }; 63 };
64 64
65 Examples (1G generic fixed-link + MDIO): 65 Examples (1G generic fixed-link + MDIO):
66 nixge0: ethernet@40000000 { 66 nixge0: ethernet@40000000 {
67 compatible = "ni,xge-enet-2.00 67 compatible = "ni,xge-enet-2.00";
68 reg = <0x40000000 0x6000>; 68 reg = <0x40000000 0x6000>;
69 69
70 nvmem-cells = <ð1_addr>; 70 nvmem-cells = <ð1_addr>;
71 nvmem-cell-names = "address"; 71 nvmem-cell-names = "address";
72 72
73 interrupts = <0 29 IRQ_TYPE_LE 73 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
74 interrupt-names = "rx", "tx"; 74 interrupt-names = "rx", "tx";
75 interrupt-parent = <&intc>; 75 interrupt-parent = <&intc>;
76 76
77 phy-mode = "xgmii"; 77 phy-mode = "xgmii";
78 78
79 fixed-link { 79 fixed-link {
80 speed = <1000>; 80 speed = <1000>;
81 pause; 81 pause;
82 link-gpios = <&gpio0 6 82 link-gpios = <&gpio0 63 GPIO_ACTIVE_HIGH>;
83 }; 83 };
84 84
85 mdio { 85 mdio {
86 ethernet_phy1: etherne 86 ethernet_phy1: ethernet-phy@4 {
87 compatible = " 87 compatible = "ethernet-phy-ieee802.3-c22";
88 reg = <4>; 88 reg = <4>;
89 }; 89 };
90 }; 90 };
91 91
92 }; 92 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.