1 Motorola CPCAP PMIC USB PHY binding 1 Motorola CPCAP PMIC USB PHY binding
2 2
3 Required properties: 3 Required properties:
4 compatible: Shall be either "motorola,cpcap-us 4 compatible: Shall be either "motorola,cpcap-usb-phy" or
5 "motorola,mapphone-cpcap-usb-phy" 5 "motorola,mapphone-cpcap-usb-phy"
6 #phy-cells: Shall be 0 6 #phy-cells: Shall be 0
7 interrupts: CPCAP PMIC interrupts used by the 7 interrupts: CPCAP PMIC interrupts used by the USB PHY
8 interrupt-names: Interrupt names 8 interrupt-names: Interrupt names
9 io-channels: IIO ADC channels used by the USB 9 io-channels: IIO ADC channels used by the USB PHY
10 io-channel-names: IIO ADC channel names 10 io-channel-names: IIO ADC channel names
11 vusb-supply: Regulator for the PHY 11 vusb-supply: Regulator for the PHY
12 12
13 Optional properties: 13 Optional properties:
14 pinctrl: Optional alternate pin modes for the 14 pinctrl: Optional alternate pin modes for the PHY
15 pinctrl-names: Names for optional pin modes 15 pinctrl-names: Names for optional pin modes
16 mode-gpios: Optional GPIOs for configuring alt 16 mode-gpios: Optional GPIOs for configuring alternate modes
17 17
18 Example: 18 Example:
19 cpcap_usb2_phy: phy { 19 cpcap_usb2_phy: phy {
20 compatible = "motorola,mapphone-cpcap- 20 compatible = "motorola,mapphone-cpcap-usb-phy";
21 pinctrl-0 = <&usb_gpio_mux_sel1 &usb_g 21 pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
22 pinctrl-1 = <&usb_ulpi_pins>; 22 pinctrl-1 = <&usb_ulpi_pins>;
23 pinctrl-2 = <&usb_utmi_pins>; 23 pinctrl-2 = <&usb_utmi_pins>;
24 pinctrl-3 = <&uart3_pins>; 24 pinctrl-3 = <&uart3_pins>;
25 pinctrl-names = "default", "ulpi", "ut 25 pinctrl-names = "default", "ulpi", "utmi", "uart";
26 #phy-cells = <0>; 26 #phy-cells = <0>;
27 interrupts-extended = < 27 interrupts-extended = <
28 &cpcap 15 0 &cpcap 14 0 &cpcap 28 &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
29 &cpcap 18 0 &cpcap 17 0 &cpcap 29 &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
30 &cpcap 48 1 30 &cpcap 48 1
31 >; 31 >;
32 interrupt-names = 32 interrupt-names =
33 "id_ground", "id_float", "se0c 33 "id_ground", "id_float", "se0conn", "vbusvld",
34 "sessvld", "sessend", "se1", " 34 "sessvld", "sessend", "se1", "dm", "dp";
35 mode-gpios = <&gpio2 28 GPIO_ACTIVE_HI 35 mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
36 &gpio1 0 GPIO_ACTIVE_HIG 36 &gpio1 0 GPIO_ACTIVE_HIGH>;
37 io-channels = <&cpcap_adc 2>, <&cpcap_ 37 io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
38 io-channel-names = "vbus", "id"; 38 io-channel-names = "vbus", "id";
39 vusb-supply = <&vusb>; 39 vusb-supply = <&vusb>;
40 }; 40 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.