1 # SPDX-License-Identifier: (GPL-2.0-only OR BS
2 %YAML 1.2
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/atm
5 $schema: http://devicetree.org/meta-schemas/co
6
7 title: Microchip PIO3 Pinmux Controller
8
9 maintainers:
10 - Manikandan Muralidharan <manikandan.m@micro
11
12 description:
13 The AT91 Pinmux Controller, enables the IC t
14 functional blocks. The sharing is done by mu
15 signals. For each PAD there are up to 8 muxi
16 Since different modules require different PA
17 etc) the controller controls also the PAD se
18
19 properties:
20 compatible:
21 oneOf:
22 - items:
23 - enum:
24 - atmel,at91rm9200-pinctrl
25 - atmel,at91sam9x5-pinctrl
26 - atmel,sama5d3-pinctrl
27 - microchip,sam9x60-pinctrl
28 - const: simple-mfd
29 - items:
30 - enum:
31 - microchip,sam9x7-pinctrl
32 - const: microchip,sam9x60-pinctrl
33 - const: simple-mfd
34
35 '#address-cells':
36 const: 1
37
38 '#size-cells':
39 const: 1
40
41 ranges: true
42
43 atmel,mux-mask:
44 $ref: /schemas/types.yaml#/definitions/uin
45 description: |
46 Array of mask (periph per bank) to descr
47 configured in this periph mode. All the
48 be described.
49
50 #How to create such array:
51
52 Each column will represent the possible
53 Each line will represent a pio bank
54
55 #Example:
56
57 In at91sam9260.dtsi,
58 Peripheral: 2 ( A and B)
59 Bank: 3 (A, B and C)
60
61 # A B
62 0xffffffff 0xffc00c3b # pioA
63 0xffffffff 0x7fff3ccf # pioB
64 0xffffffff 0x007fffff # pioC
65
66 For each peripheral/bank we will describ
67 configured in it by putting 1 to the pin
68
69 Let's take the pioA on peripheral B whos
70 From the datasheet Table 10-2.
71 Peripheral B
72 PA0 MCDB0
73 PA1 MCCDB
74 PA2
75 PA3 MCDB3
76 PA4 MCDB2
77 PA5 MCDB1
78 PA6
79 PA7
80 PA8
81 PA9
82 PA10 ETX2
83 PA11 ETX3
84 PA12
85 PA13
86 PA14
87 PA15
88 PA16
89 PA17
90 PA18
91 PA19
92 PA20
93 PA21
94 PA22 ETXER
95 PA23 ETX2
96 PA24 ETX3
97 PA25 ERX2
98 PA26 ERX3
99 PA27 ERXCK
100 PA28 ECRS
101 PA29 ECOL
102 PA30 RXD4
103 PA31 TXD4
104
105 allOf:
106 - $ref: pinctrl.yaml#
107
108 required:
109 - compatible
110 - ranges
111 - "#address-cells"
112 - "#size-cells"
113 - atmel,mux-mask
114
115 patternProperties:
116 'gpio@[0-9a-f]+$':
117 $ref: /schemas/gpio/atmel,at91rm9200-gpio.
118 unevaluatedProperties: false
119
120 additionalProperties:
121 type: object
122 additionalProperties:
123 type: object
124 additionalProperties: false
125
126 properties:
127 atmel,pins:
128 $ref: /schemas/types.yaml#/definitions
129 description: |
130 Each entry consists of 4 integers an
131 mux and config setting.The format is
132 atmel,pins = <PIN_BANK PIN_BANK_NUM
133 Supported pin number and mux varies
134 are defined in <include/dt-bindings/
135 items:
136 items:
137 - description:
138 Pin bank
139 - description:
140 Pin bank index
141 - description:
142 Peripheral function
143 - description:
144 Pad configuration
145
146 examples:
147 - |
148 #include <dt-bindings/clock/at91.h>
149 #include <dt-bindings/interrupt-controlle
150 #include <dt-bindings/pinctrl/at91.h>
151
152 pinctrl@fffff400 {
153 #address-cells = <1>;
154 #size-cells = <1>;
155 compatible = "atmel,at91rm9200-pinctrl"
156 ranges = <0xfffff400 0xfffff400 0x600>;
157
158 atmel,mux-mask = <
159 /* A B */
160 0xffffffff 0xffc00c3b /* pioA */
161 0xffffffff 0x7fff3ccf /* pioB */
162 0xffffffff 0x007fffff /* pioC */
163 >;
164
165 dbgu {
166 pinctrl_dbgu: dbgu-0 {
167 atmel,pins =
168 <AT91_PIOB 14 AT91_PERIPH_A AT91_
169 AT91_PIOB 15 AT91_PERIPH_A AT91_
170 };
171 };
172
173 pioA: gpio@fffff400 {
174 compatible = "atmel,at91rm9200-gpio";
175 reg = <0xfffff400 0x200>;
176 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1
177 #gpio-cells = <2>;
178 gpio-controller;
179 interrupt-controller;
180 #interrupt-cells = <2>;
181 clocks = <&pmc PMC_TYPE_PERIPHERAL 2>
182 };
183 };
184 ...
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.