1 Axis ARTPEC-6 Pin Controller
2
3 Required properties:
4 - compatible: "axis,artpec6-pinctrl".
5 - reg: Should contain the register physical ad
6 controller.
7
8 A pinctrl node should contain at least one sub
9 groups available on the machine. Each subnode
10 required and what pin group it will use. Each
11 drive strength and bias pullup of the pin grou
12 not set, its actual value will be unspecified.
13
14
15 Required subnode-properties:
16 - function: Function to mux.
17 - groups: Name of the pin group to use for the
18
19 Available functions and groups (functi
20 gpio: cpuclkoutgrp0, udlclkout
21 i2c3grp0, i2s0grp0, i2s1
22 spi1grp0, pciedebuggrp0,
23 uart1grp0, uart1grp1, ua
24 uart3grp0, uart4grp0, ua
25 uart5nocts
26 cpuclkout: cpuclkoutgrp0
27 udlclkout: udlclkoutgrp0
28 i2c1: i2c1grp0
29 i2c2: i2c2grp0
30 i2c3: i2c3grp0
31 i2s0: i2s0grp0
32 i2s1: i2s1grp0
33 i2srefclk: i2srefclkgrp0
34 spi0: spi0grp0
35 spi1: spi1grp0
36 pciedebug: pciedebuggrp0
37 uart0: uart0grp0, uart0grp1, u
38 uart1: uart1grp0, uart1grp1
39 uart2: uart2grp0, uart2grp1, u
40 uart3: uart3grp0
41 uart4: uart4grp0, uart4grp1
42 uart5: uart5grp0, uart5grp1, u
43 nand: nandgrp0
44 sdio0: sdio0grp0
45 sdio1: sdio1grp0
46 ethernet: ethernetgrp0
47
48
49 Optional subnode-properties (see pinctrl-bindi
50 - drive-strength: 4, 6, 8, 9 mA. For SD and N
51 - bias-pull-up
52 - bias-disable
53
54 Examples:
55 pinctrl@f801d000 {
56 compatible = "axis,artpec6-pinctrl";
57 reg = <0xf801d000 0x400>;
58
59 pinctrl_uart0: uart0grp {
60 function = "uart0";
61 groups = "uart0grp0";
62 drive-strength = <4>;
63 bias-pull-up;
64 };
65 pinctrl_uart3: uart3grp {
66 function = "uart3";
67 groups = "uart3grp0";
68 };
69 };
70 uart0: uart@f8036000 {
71 compatible = "arm,pl011", "arm,primece
72 reg = <0xf8036000 0x1000>;
73 interrupts = <0 104 IRQ_TYPE_LEVEL_HIG
74 clocks = <&pll2div24>, <&apb_pclk>;
75 clock-names = "uart_clk", "apb_pclk";
76 pinctrl-names = "default";
77 pinctrl-0 = <&pinctrl_uart0>;
78 };
79 uart3: uart@f8039000 {
80 compatible = "arm,pl011", "arm,primece
81 reg = <0xf8039000 0x1000>;
82 interrupts = <0 128 IRQ_TYPE_LEVEL_HIG
83 clocks = <&pll2div24>, <&apb_pclk>;
84 clock-names = "uart_clk", "apb_pclk";
85 pinctrl-names = "default";
86 pinctrl-0 = <&pinctrl_uart3>;
87 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.