1 * Freescale IOMUX Controller (IOMUXC) for i.MX 1 * Freescale IOMUX Controller (IOMUXC) for i.MX
2 2
3 The IOMUX Controller (IOMUXC), together with t 3 The IOMUX Controller (IOMUXC), together with the IOMUX, enables the IC
4 to share one PAD to several functional blocks. 4 to share one PAD to several functional blocks. The sharing is done by
5 multiplexing the PAD input/output signals. For 5 multiplexing the PAD input/output signals. For each PAD there are up to
6 8 muxing options (called ALT modes). Since dif 6 8 muxing options (called ALT modes). Since different modules require
7 different PAD settings (like pull up, keeper, 7 different PAD settings (like pull up, keeper, etc) the IOMUXC controls
8 also the PAD settings parameters. 8 also the PAD settings parameters.
9 9
10 Please refer to pinctrl-bindings.txt in this d 10 Please refer to pinctrl-bindings.txt in this directory for details of the
11 common pinctrl bindings used by client devices 11 common pinctrl bindings used by client devices, including the meaning of the
12 phrase "pin configuration node". 12 phrase "pin configuration node".
13 13
14 Freescale IMX pin configuration node is a node 14 Freescale IMX pin configuration node is a node of a group of pins which can be
15 used for a specific device or function. This n 15 used for a specific device or function. This node represents both mux and config
16 of the pins in that group. The 'mux' selects t 16 of the pins in that group. The 'mux' selects the function mode(also named mux
17 mode) this pin can work on and the 'config' co 17 mode) this pin can work on and the 'config' configures various pad settings
18 such as pull-up, open drain, drive strength, e 18 such as pull-up, open drain, drive strength, etc.
19 19
20 Required properties for iomux controller: 20 Required properties for iomux controller:
21 - compatible: "fsl,<soc>-iomuxc" 21 - compatible: "fsl,<soc>-iomuxc"
22 Please refer to each fsl,<soc>-pinctrl.txt b 22 Please refer to each fsl,<soc>-pinctrl.txt binding doc for supported SoCs.
23 23
24 Required properties for pin configuration node 24 Required properties for pin configuration node:
25 - fsl,pins: each entry consists of 6 integers 25 - fsl,pins: each entry consists of 6 integers and represents the mux and config
26 setting for one pin. The first 5 integers <m 26 setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
27 input_val> are specified using a PIN_FUNC_ID 27 input_val> are specified using a PIN_FUNC_ID macro, which can be found in
28 imx*-pinfunc.h under device tree source fold 28 imx*-pinfunc.h under device tree source folder. The last integer CONFIG is
29 the pad setting value like pull-up on this p 29 the pad setting value like pull-up on this pin. And that's why fsl,pins entry
30 looks like <PIN_FUNC_ID CONFIG> in the examp 30 looks like <PIN_FUNC_ID CONFIG> in the example below.
31 31
32 Bits used for CONFIG: 32 Bits used for CONFIG:
33 NO_PAD_CTL(1 << 31): indicate this pin does no 33 NO_PAD_CTL(1 << 31): indicate this pin does not need config.
34 34
35 SION(1 << 30): Software Input On Field. 35 SION(1 << 30): Software Input On Field.
36 Force the selected mux mode input path no matt 36 Force the selected mux mode input path no matter of MUX_MODE functionality.
37 By default the input path is determined by fun 37 By default the input path is determined by functionality of the selected
38 mux mode (regular). 38 mux mode (regular).
39 39
40 Other bits are used for PAD setting. 40 Other bits are used for PAD setting.
41 Please refer to each fsl,<soc>-pinctrl,txt bin 41 Please refer to each fsl,<soc>-pinctrl,txt binding doc for SoC specific part
42 of bits definitions. 42 of bits definitions.
43 43
44 NOTE: 44 NOTE:
45 Some requirements for using fsl,imx-pinctrl bi 45 Some requirements for using fsl,imx-pinctrl binding:
46 1. We have pin function node defined under iom 46 1. We have pin function node defined under iomux controller node to represent
47 what pinmux functions this SoC supports. 47 what pinmux functions this SoC supports.
48 2. The pin configuration node intends to work 48 2. The pin configuration node intends to work on a specific function should
49 to be defined under that specific function 49 to be defined under that specific function node.
50 The function node's name should represent w 50 The function node's name should represent well about what function
51 this group of pins in this pin configuratio 51 this group of pins in this pin configuration node are working on.
52 3. The driver can use the function node's name 52 3. The driver can use the function node's name and pin configuration node's
53 name describe the pin function and group hi 53 name describe the pin function and group hierarchy.
54 For example, Linux IMX pinctrl driver takes 54 For example, Linux IMX pinctrl driver takes the function node's name
55 as the function name and pin configuration 55 as the function name and pin configuration node's name as group name to
56 create the map table. 56 create the map table.
57 4. Each pin configuration node should have a p 57 4. Each pin configuration node should have a phandle, devices can set pins
58 configurations by referring to the phandle 58 configurations by referring to the phandle of that pin configuration node.
59 59
60 Examples: 60 Examples:
61 usdhc@219c000 { /* uSDHC4 */ !! 61 usdhc@0219c000 { /* uSDHC4 */
62 non-removable; 62 non-removable;
63 vmmc-supply = <®_3p3v>; 63 vmmc-supply = <®_3p3v>;
64 pinctrl-names = "default"; 64 pinctrl-names = "default";
65 pinctrl-0 = <&pinctrl_usdhc4_1>; 65 pinctrl-0 = <&pinctrl_usdhc4_1>;
66 }; 66 };
67 67
68 iomuxc@20e0000 { !! 68 iomuxc@020e0000 {
69 compatible = "fsl,imx6q-iomuxc"; 69 compatible = "fsl,imx6q-iomuxc";
70 reg = <0x020e0000 0x4000>; 70 reg = <0x020e0000 0x4000>;
71 71
72 /* shared pinctrl settings */ 72 /* shared pinctrl settings */
73 usdhc4 { 73 usdhc4 {
74 pinctrl_usdhc4_1: usdhc4grp-1 74 pinctrl_usdhc4_1: usdhc4grp-1 {
75 fsl,pins = < 75 fsl,pins = <
76 MX6QDL_PAD_SD4 76 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
77 MX6QDL_PAD_SD4 77 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
78 MX6QDL_PAD_SD4 78 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
79 MX6QDL_PAD_SD4 79 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
80 MX6QDL_PAD_SD4 80 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
81 MX6QDL_PAD_SD4 81 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
82 MX6QDL_PAD_SD4 82 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
83 MX6QDL_PAD_SD4 83 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
84 MX6QDL_PAD_SD4 84 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
85 MX6QDL_PAD_SD4 85 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
86 >; 86 >;
87 }; 87 };
88 .... 88 ....
89 }; 89 };
90 Refer to the IOMUXC controller chapter in imx6 90 Refer to the IOMUXC controller chapter in imx6q datasheet,
91 0x17059 means enable hysteresis, 47KOhm Pull U 91 0x17059 means enable hysteresis, 47KOhm Pull Up, 50Mhz speed,
92 80Ohm driver strength and Fast Slew Rate. 92 80Ohm driver strength and Fast Slew Rate.
93 User should refer to each SoC spec to set the 93 User should refer to each SoC spec to set the correct value.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.