1 # SPDX-License-Identifier: (GPL-2.0-only OR BS 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2 %YAML 1.2 2 %YAML 1.2
3 --- 3 ---
4 $id: http://devicetree.org/schemas/pinctrl/ing 4 $id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/co 5 $schema: http://devicetree.org/meta-schemas/core.yaml#
6 6
7 title: Ingenic SoCs pin controller 7 title: Ingenic SoCs pin controller
8 8
9 description: > 9 description: >
10 Please refer to pinctrl-bindings.txt in this 10 Please refer to pinctrl-bindings.txt in this directory for details of the
11 common pinctrl bindings used by client devic 11 common pinctrl bindings used by client devices, including the meaning of the
12 phrase "pin configuration node". 12 phrase "pin configuration node".
13 13
14 For the Ingenic SoCs, pin control is tightly 14 For the Ingenic SoCs, pin control is tightly bound with GPIO ports. All pins
15 may be used as GPIOs, multiplexed device fun 15 may be used as GPIOs, multiplexed device functions are configured within the
16 GPIO port configuration registers and it is 16 GPIO port configuration registers and it is typical to refer to pins using the
17 naming scheme "PxN" where x is a character i 17 naming scheme "PxN" where x is a character identifying the GPIO port with
18 which the pin is associated and N is an inte 18 which the pin is associated and N is an integer from 0 to 31 identifying the
19 pin within that GPIO port. For example PA0 i 19 pin within that GPIO port. For example PA0 is the first pin in GPIO port A,
20 and PB31 is the last pin in GPIO port B. The 20 and PB31 is the last pin in GPIO port B. The JZ4730, the JZ4740, the JZ4725B,
21 the X1000 and the X1830 contains 4 GPIO port 21 the X1000 and the X1830 contains 4 GPIO ports, PA to PD, for a total of 128
22 pins. The X2000 and the X2100 contains 5 GPI 22 pins. The X2000 and the X2100 contains 5 GPIO ports, PA to PE, for a total of
23 160 pins. The JZ4750, the JZ4755 the JZ4760, 23 160 pins. The JZ4750, the JZ4755 the JZ4760, the JZ4770 and the JZ4780 contains
24 6 GPIO ports, PA to PF, for a total of 192 p 24 6 GPIO ports, PA to PF, for a total of 192 pins. The JZ4775 contains 7 GPIO
25 ports, PA to PG, for a total of 224 pins. 25 ports, PA to PG, for a total of 224 pins.
26 26
27 maintainers: 27 maintainers:
28 - Paul Cercueil <paul@crapouillou.net> 28 - Paul Cercueil <paul@crapouillou.net>
29 29
30 properties: 30 properties:
31 compatible: 31 compatible:
32 oneOf: 32 oneOf:
33 - enum: 33 - enum:
34 - ingenic,jz4730-pinctrl 34 - ingenic,jz4730-pinctrl
35 - ingenic,jz4740-pinctrl 35 - ingenic,jz4740-pinctrl
36 - ingenic,jz4725b-pinctrl 36 - ingenic,jz4725b-pinctrl
37 - ingenic,jz4750-pinctrl 37 - ingenic,jz4750-pinctrl
38 - ingenic,jz4755-pinctrl 38 - ingenic,jz4755-pinctrl
39 - ingenic,jz4760-pinctrl 39 - ingenic,jz4760-pinctrl
40 - ingenic,jz4770-pinctrl 40 - ingenic,jz4770-pinctrl
41 - ingenic,jz4775-pinctrl 41 - ingenic,jz4775-pinctrl
42 - ingenic,jz4780-pinctrl 42 - ingenic,jz4780-pinctrl
43 - ingenic,x1000-pinctrl 43 - ingenic,x1000-pinctrl
44 - ingenic,x1500-pinctrl 44 - ingenic,x1500-pinctrl
45 - ingenic,x1830-pinctrl 45 - ingenic,x1830-pinctrl
46 - ingenic,x2000-pinctrl 46 - ingenic,x2000-pinctrl
47 - ingenic,x2100-pinctrl 47 - ingenic,x2100-pinctrl
48 - items: 48 - items:
49 - const: ingenic,jz4760b-pinctrl 49 - const: ingenic,jz4760b-pinctrl
50 - const: ingenic,jz4760-pinctrl 50 - const: ingenic,jz4760-pinctrl
51 - items: 51 - items:
52 - const: ingenic,x1000e-pinctrl 52 - const: ingenic,x1000e-pinctrl
53 - const: ingenic,x1000-pinctrl 53 - const: ingenic,x1000-pinctrl
54 - items: 54 - items:
55 - const: ingenic,x2000e-pinctrl 55 - const: ingenic,x2000e-pinctrl
56 - const: ingenic,x2000-pinctrl 56 - const: ingenic,x2000-pinctrl
57 57
58 reg: 58 reg:
59 maxItems: 1 59 maxItems: 1
60 60
61 "#address-cells": 61 "#address-cells":
62 const: 1 62 const: 1
63 63
64 "#size-cells": 64 "#size-cells":
65 const: 0 65 const: 0
66 66
67 patternProperties: 67 patternProperties:
68 "^gpio@[0-9]$": 68 "^gpio@[0-9]$":
69 type: object 69 type: object
70 properties: 70 properties:
71 compatible: 71 compatible:
72 enum: 72 enum:
73 - ingenic,jz4730-gpio 73 - ingenic,jz4730-gpio
74 - ingenic,jz4740-gpio 74 - ingenic,jz4740-gpio
75 - ingenic,jz4725b-gpio 75 - ingenic,jz4725b-gpio
76 - ingenic,jz4750-gpio 76 - ingenic,jz4750-gpio
77 - ingenic,jz4755-gpio 77 - ingenic,jz4755-gpio
78 - ingenic,jz4760-gpio 78 - ingenic,jz4760-gpio
79 - ingenic,jz4770-gpio 79 - ingenic,jz4770-gpio
80 - ingenic,jz4775-gpio 80 - ingenic,jz4775-gpio
81 - ingenic,jz4780-gpio 81 - ingenic,jz4780-gpio
82 - ingenic,x1000-gpio 82 - ingenic,x1000-gpio
83 - ingenic,x1500-gpio 83 - ingenic,x1500-gpio
84 - ingenic,x1830-gpio 84 - ingenic,x1830-gpio
85 - ingenic,x2000-gpio 85 - ingenic,x2000-gpio
86 - ingenic,x2100-gpio 86 - ingenic,x2100-gpio
87 87
88 reg: 88 reg:
89 items: 89 items:
90 - description: The GPIO bank number 90 - description: The GPIO bank number
91 91
92 gpio-controller: true 92 gpio-controller: true
93 93
94 "#gpio-cells": 94 "#gpio-cells":
95 const: 2 95 const: 2
96 96
97 gpio-ranges: 97 gpio-ranges:
98 maxItems: 1 98 maxItems: 1
99 99
100 interrupt-controller: true 100 interrupt-controller: true
101 101
102 "#interrupt-cells": 102 "#interrupt-cells":
103 const: 2 103 const: 2
104 description: 104 description:
105 Refer to ../interrupt-controller/int 105 Refer to ../interrupt-controller/interrupts.txt for more details.
106 106
107 interrupts: 107 interrupts:
108 maxItems: 1 108 maxItems: 1
109 109
110 required: 110 required:
111 - compatible 111 - compatible
112 - reg 112 - reg
113 - gpio-controller 113 - gpio-controller
114 - "#gpio-cells" 114 - "#gpio-cells"
115 - interrupts 115 - interrupts
116 - interrupt-controller 116 - interrupt-controller
117 - "#interrupt-cells" 117 - "#interrupt-cells"
118 118
119 additionalProperties: false 119 additionalProperties: false
120 120
121 allOf: 121 allOf:
122 - $ref: pinctrl.yaml# !! 122 - $ref: "pinctrl.yaml#"
123 123
124 required: 124 required:
125 - compatible 125 - compatible
126 - reg 126 - reg
127 - "#address-cells" 127 - "#address-cells"
128 - "#size-cells" 128 - "#size-cells"
129 129
130 additionalProperties: 130 additionalProperties:
131 anyOf: 131 anyOf:
132 - type: object 132 - type: object
133 allOf: 133 allOf:
134 - $ref: pincfg-node.yaml# 134 - $ref: pincfg-node.yaml#
135 - $ref: pinmux-node.yaml# 135 - $ref: pinmux-node.yaml#
136 136
137 properties: 137 properties:
>> 138 phandle: true
138 function: true 139 function: true
139 groups: true 140 groups: true
140 pins: true 141 pins: true
141 bias-disable: true 142 bias-disable: true
142 bias-pull-up: true 143 bias-pull-up: true
143 bias-pull-down: true 144 bias-pull-down: true
144 output-low: true 145 output-low: true
145 output-high: true 146 output-high: true
146 additionalProperties: false 147 additionalProperties: false
147 148
148 - type: object 149 - type: object
>> 150 properties:
>> 151 phandle: true
149 additionalProperties: 152 additionalProperties:
150 type: object 153 type: object
151 allOf: 154 allOf:
152 - $ref: pincfg-node.yaml# 155 - $ref: pincfg-node.yaml#
153 - $ref: pinmux-node.yaml# 156 - $ref: pinmux-node.yaml#
154 157
155 properties: 158 properties:
>> 159 phandle: true
156 function: true 160 function: true
157 groups: true 161 groups: true
158 pins: true 162 pins: true
159 bias-disable: true 163 bias-disable: true
160 bias-pull-up: true 164 bias-pull-up: true
161 bias-pull-down: true 165 bias-pull-down: true
162 output-low: true 166 output-low: true
163 output-high: true 167 output-high: true
164 additionalProperties: false 168 additionalProperties: false
165 169
166 examples: 170 examples:
167 - | 171 - |
168 pinctrl@10010000 { 172 pinctrl@10010000 {
169 compatible = "ingenic,jz4770-pinctrl"; 173 compatible = "ingenic,jz4770-pinctrl";
170 reg = <0x10010000 0x600>; 174 reg = <0x10010000 0x600>;
171 175
172 #address-cells = <1>; 176 #address-cells = <1>;
173 #size-cells = <0>; 177 #size-cells = <0>;
174 178
175 gpio@0 { 179 gpio@0 {
176 compatible = "ingenic,jz4770-gpio"; 180 compatible = "ingenic,jz4770-gpio";
177 reg = <0>; 181 reg = <0>;
178 182
179 gpio-controller; 183 gpio-controller;
180 gpio-ranges = <&pinctrl 0 0 32>; 184 gpio-ranges = <&pinctrl 0 0 32>;
181 #gpio-cells = <2>; 185 #gpio-cells = <2>;
182 186
183 interrupt-controller; 187 interrupt-controller;
184 #interrupt-cells = <2>; 188 #interrupt-cells = <2>;
185 189
186 interrupt-parent = <&intc>; 190 interrupt-parent = <&intc>;
187 interrupts = <17>; 191 interrupts = <17>;
188 }; 192 };
189 }; 193 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.