1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-C 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2 %YAML 1.2 2 %YAML 1.2
3 --- 3 ---
4 $id: http://devicetree.org/schemas/pinctrl/qco 4 $id: http://devicetree.org/schemas/pinctrl/qcom,pmic-mpp.yaml#
5 $schema: http://devicetree.org/meta-schemas/co 5 $schema: http://devicetree.org/meta-schemas/core.yaml#
6 6
7 title: Qualcomm PMIC Multi-Purpose Pin (MPP) b 7 title: Qualcomm PMIC Multi-Purpose Pin (MPP) block
8 8
9 maintainers: 9 maintainers:
10 - Bjorn Andersson <bjorn.andersson@linaro.org 10 - Bjorn Andersson <bjorn.andersson@linaro.org>
11 11
12 description: 12 description:
13 This binding describes the MPP block(s) foun 13 This binding describes the MPP block(s) found in the 8xxx series of
14 PMIC's from Qualcomm. 14 PMIC's from Qualcomm.
15 15
16 properties: 16 properties:
17 compatible: 17 compatible:
18 oneOf: 18 oneOf:
19 - items: 19 - items:
20 - enum: 20 - enum:
21 - qcom,pm8019-mpp 21 - qcom,pm8019-mpp
22 - qcom,pm8226-mpp 22 - qcom,pm8226-mpp
23 - qcom,pm8841-mpp 23 - qcom,pm8841-mpp
24 - qcom,pm8916-mpp 24 - qcom,pm8916-mpp
25 - qcom,pm8941-mpp 25 - qcom,pm8941-mpp
26 - qcom,pm8950-mpp 26 - qcom,pm8950-mpp
27 - qcom,pmi8950-mpp 27 - qcom,pmi8950-mpp
28 - qcom,pm8994-mpp 28 - qcom,pm8994-mpp
29 - qcom,pma8084-mpp 29 - qcom,pma8084-mpp
30 - qcom,pmi8994-mpp 30 - qcom,pmi8994-mpp
31 - const: qcom,spmi-mpp 31 - const: qcom,spmi-mpp
32 - items: 32 - items:
33 - enum: 33 - enum:
34 - qcom,pm8018-mpp 34 - qcom,pm8018-mpp
35 - qcom,pm8038-mpp 35 - qcom,pm8038-mpp
36 - qcom,pm8058-mpp 36 - qcom,pm8058-mpp
37 - qcom,pm8821-mpp 37 - qcom,pm8821-mpp
38 - qcom,pm8901-mpp <<
39 - qcom,pm8917-mpp 38 - qcom,pm8917-mpp
40 - qcom,pm8921-mpp 39 - qcom,pm8921-mpp
41 - const: qcom,ssbi-mpp 40 - const: qcom,ssbi-mpp
42 41
43 reg: 42 reg:
44 maxItems: 1 43 maxItems: 1
45 44
46 interrupt-controller: true 45 interrupt-controller: true
47 46
48 '#interrupt-cells': 47 '#interrupt-cells':
49 const: 2 48 const: 2
50 49
51 gpio-controller: true 50 gpio-controller: true
52 gpio-line-names: true 51 gpio-line-names: true
53 52
54 gpio-ranges: 53 gpio-ranges:
55 maxItems: 1 54 maxItems: 1
56 55
57 '#gpio-cells': 56 '#gpio-cells':
58 const: 2 57 const: 2
59 description: 58 description:
60 The first cell will be used to define gp 59 The first cell will be used to define gpio number and the
61 second denotes the flags for this gpio 60 second denotes the flags for this gpio
62 61
63 additionalProperties: false 62 additionalProperties: false
64 63
65 required: 64 required:
66 - compatible 65 - compatible
67 - reg 66 - reg
68 - gpio-controller 67 - gpio-controller
69 - '#gpio-cells' 68 - '#gpio-cells'
70 - gpio-ranges 69 - gpio-ranges
71 - interrupt-controller 70 - interrupt-controller
72 71
73 patternProperties: 72 patternProperties:
74 '-state$': 73 '-state$':
75 oneOf: 74 oneOf:
76 - $ref: "#/$defs/qcom-pmic-mpp-state" 75 - $ref: "#/$defs/qcom-pmic-mpp-state"
77 - patternProperties: 76 - patternProperties:
78 '-pins$': 77 '-pins$':
79 $ref: "#/$defs/qcom-pmic-mpp-state 78 $ref: "#/$defs/qcom-pmic-mpp-state"
80 additionalProperties: false 79 additionalProperties: false
81 80
82 $defs: 81 $defs:
83 qcom-pmic-mpp-state: 82 qcom-pmic-mpp-state:
84 type: object 83 type: object
85 allOf: 84 allOf:
86 - $ref: pinmux-node.yaml !! 85 - $ref: "pinmux-node.yaml"
87 - $ref: pincfg-node.yaml !! 86 - $ref: "pincfg-node.yaml"
88 properties: 87 properties:
89 pins: 88 pins:
90 description: 89 description:
91 List of gpio pins affected by the pr 90 List of gpio pins affected by the properties specified in
92 this subnode. Valid pins are 91 this subnode. Valid pins are
93 - mpp1-mpp4 for pm8841 92 - mpp1-mpp4 for pm8841
94 - mpp1-mpp4 for pm8916 93 - mpp1-mpp4 for pm8916
95 - mpp1-mpp8 for pm8941 94 - mpp1-mpp8 for pm8941
96 - mpp1-mpp4 for pm8950 95 - mpp1-mpp4 for pm8950
97 - mpp1-mpp4 for pmi8950 96 - mpp1-mpp4 for pmi8950
98 - mpp1-mpp4 for pma8084 97 - mpp1-mpp4 for pma8084
99 98
100 items: 99 items:
101 pattern: "^mpp([0-9]+)$" 100 pattern: "^mpp([0-9]+)$"
102 101
103 function: 102 function:
104 items: 103 items:
105 - enum: 104 - enum:
106 - digital 105 - digital
107 - analog 106 - analog
108 - sink 107 - sink
109 108
110 bias-disable: true 109 bias-disable: true
111 bias-pull-up: true 110 bias-pull-up: true
112 bias-high-impedance: true 111 bias-high-impedance: true
113 input-enable: true 112 input-enable: true
114 output-high: true 113 output-high: true
115 output-low: true 114 output-low: true
116 power-source: true 115 power-source: true
117 116
118 qcom,analog-level: 117 qcom,analog-level:
119 $ref: /schemas/types.yaml#/definitions 118 $ref: /schemas/types.yaml#/definitions/uint32
120 description: 119 description:
121 Selects the source for analog output 120 Selects the source for analog output. Valued values are defined in
122 <dt-binding/pinctrl/qcom,pmic-mpp.h> 121 <dt-binding/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AOUT_LVL_*
123 enum: [0, 1, 2, 3, 4, 5, 6, 7] 122 enum: [0, 1, 2, 3, 4, 5, 6, 7]
124 123
125 qcom,atest: 124 qcom,atest:
126 $ref: /schemas/types.yaml#/definitions 125 $ref: /schemas/types.yaml#/definitions/uint32
127 description: 126 description:
128 Selects ATEST rail to route to GPIO 127 Selects ATEST rail to route to GPIO when it's
129 configured in analog-pass-through mo 128 configured in analog-pass-through mode.
130 enum: [1, 2, 3, 4] 129 enum: [1, 2, 3, 4]
131 130
132 qcom,dtest: 131 qcom,dtest:
133 $ref: /schemas/types.yaml#/definitions 132 $ref: /schemas/types.yaml#/definitions/uint32
134 description: 133 description:
135 Selects DTEST rail to route to GPIO 134 Selects DTEST rail to route to GPIO when it's
136 configured as digital input. 135 configured as digital input.
137 enum: [1, 2, 3, 4] 136 enum: [1, 2, 3, 4]
138 137
139 qcom,amux-route: 138 qcom,amux-route:
140 $ref: /schemas/types.yaml#/definitions 139 $ref: /schemas/types.yaml#/definitions/uint32
141 description: 140 description:
142 Selects the source for analog input. 141 Selects the source for analog input. Valid values are defined in
143 <dt-bindings/pinctrl/qcom,pmic-mpp.h 142 <dt-bindings/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AMUX_ROUTE_CH5,
144 PMIC_MPP_AMUX_ROUTE_CH6... 143 PMIC_MPP_AMUX_ROUTE_CH6...
145 enum: [0, 1, 2, 3, 4, 5, 6, 7] 144 enum: [0, 1, 2, 3, 4, 5, 6, 7]
146 145
147 qcom,paired: 146 qcom,paired:
148 type: boolean !! 147 - description:
149 description: !! 148 Indicates that the pin should be operating in paired mode.
150 Indicates that the pin should be ope <<
151 149
152 required: 150 required:
153 - pins 151 - pins
154 - function 152 - function
155 153
156 additionalProperties: false 154 additionalProperties: false
157 155
158 examples: 156 examples:
159 - | 157 - |
160 #include <dt-bindings/pinctrl/qcom,pmic-mp 158 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
161 159
162 pmic { !! 160 pm8841_mpp: mpps@a000 {
163 #address-cells = <1>; !! 161 compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
164 #size-cells = <0>; !! 162 reg = <0xa000 0>;
165 !! 163 gpio-controller;
166 pm8841_mpp: mpps@a000 { !! 164 #gpio-cells = <2>;
167 compatible = "qcom,pm8841-mpp", "q !! 165 gpio-ranges = <&pm8841_mpp 0 0 4>;
168 reg = <0xa000>; !! 166 gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
169 !! 167 "BT_LED_CTRL", "GPIO-F";
170 gpio-controller; !! 168 interrupt-controller;
171 #gpio-cells = <2>; !! 169 #interrupt-cells = <2>;
172 gpio-ranges = <&pm8841_mpp 0 0 4>; !! 170
173 gpio-line-names = "VDD_PX_BIAS", " !! 171 pinctrl-names = "default";
174 "BT_LED_CTRL", " !! 172 pinctrl-0 = <&pm8841_default>;
175 interrupt-controller; !! 173
176 #interrupt-cells = <2>; !! 174 mpp1-state {
177 !! 175 pins = "mpp1";
178 pinctrl-names = "default"; !! 176 function = "digital";
179 pinctrl-0 = <&pm8841_default>; !! 177 input-enable;
180 !! 178 power-source = <PM8841_MPP_S3>;
181 mpp1-state { !! 179 };
182 pins = "mpp1"; !! 180
183 function = "digital"; !! 181 default-state {
184 input-enable; !! 182 gpio-pins {
185 power-source = <PM8841_MPP_S3> !! 183 pins = "mpp1", "mpp2", "mpp3", "mpp4";
186 }; !! 184 function = "digital";
187 !! 185 input-enable;
188 default-state { !! 186 power-source = <PM8841_MPP_S3>;
189 gpio-pins { <<
190 pins = "mpp1", "mpp2", "mp <<
191 function = "digital"; <<
192 input-enable; <<
193 power-source = <PM8841_MPP <<
194 }; <<
195 }; <<
196 }; 187 };
>> 188 };
197 }; 189 };
198 ... 190 ...
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.