1 # SPDX-License-Identifier: (GPL-2.0-only OR BS 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2 # Copyright (C) Sunplus Co., Ltd. 2 # Copyright (C) Sunplus Co., Ltd.
3 %YAML 1.2 3 %YAML 1.2
4 --- 4 ---
5 $id: http://devicetree.org/schemas/pinctrl/sun 5 $id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml#
6 $schema: http://devicetree.org/meta-schemas/co 6 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 7
8 title: Sunplus SP7021 Pin Controller 8 title: Sunplus SP7021 Pin Controller
9 9
10 maintainers: 10 maintainers:
11 - Dvorkin Dmitry <dvorkin@tibbo.com> 11 - Dvorkin Dmitry <dvorkin@tibbo.com>
12 - Wells Lu <wellslutw@gmail.com> 12 - Wells Lu <wellslutw@gmail.com>
13 13
14 description: | 14 description: |
15 The Sunplus SP7021 pin controller is used to 15 The Sunplus SP7021 pin controller is used to control SoC pins. Please
16 refer to pinctrl-bindings.txt in this direct 16 refer to pinctrl-bindings.txt in this directory for details of the common
17 pinctrl bindings used by client devices. 17 pinctrl bindings used by client devices.
18 18
19 SP7021 has 99 digital GPIO pins which are nu 19 SP7021 has 99 digital GPIO pins which are numbered from GPIO 0 to 98. All
20 are multiplexed with some special function p 20 are multiplexed with some special function pins. SP7021 has 3 types of
21 special function pins: 21 special function pins:
22 22
23 (1) function-group pins: 23 (1) function-group pins:
24 Ex 1 (SPI-NOR flash): 24 Ex 1 (SPI-NOR flash):
25 If control-field SPI_FLASH_SEL is set 25 If control-field SPI_FLASH_SEL is set to 1, GPIO 83, 84, 86 and 87
26 will be pins of SPI-NOR flash. If it i 26 will be pins of SPI-NOR flash. If it is set to 2, GPIO 76, 78, 79
27 and 81 will be pins of SPI-NOR flash. 27 and 81 will be pins of SPI-NOR flash.
28 28
29 Ex 2 (UART_0): 29 Ex 2 (UART_0):
30 If control-bit UA0_SEL is set to 1, GP 30 If control-bit UA0_SEL is set to 1, GPIO 88 and 89 will be TX and
31 RX pins of UART_0 (UART channel 0). 31 RX pins of UART_0 (UART channel 0).
32 32
33 Ex 3 (eMMC): 33 Ex 3 (eMMC):
34 If control-bit EMMC_SEL is set to 1, G 34 If control-bit EMMC_SEL is set to 1, GPIO 72, 73, 74, 75, 76, 77,
35 78, 79, 80, 81 will be pins of an eMMC 35 78, 79, 80, 81 will be pins of an eMMC device.
36 36
37 Properties "function" and "groups" are u 37 Properties "function" and "groups" are used to select function-group
38 pins. 38 pins.
39 39
40 (2) fully pin-mux (like phone exchange mux) 40 (2) fully pin-mux (like phone exchange mux) pins:
41 GPIO 8 to 71 are 'fully pin-mux' pins. A 41 GPIO 8 to 71 are 'fully pin-mux' pins. Any pins of peripherals of
42 SP7021 (ex: UART_1, UART_2, UART_3, UART 42 SP7021 (ex: UART_1, UART_2, UART_3, UART_4, I2C_0, I2C_1, and etc.)
43 can be routed to any pins of fully pin-m 43 can be routed to any pins of fully pin-mux pins.
44 44
45 Ex 1 (UART channel 1): 45 Ex 1 (UART channel 1):
46 If control-field UA1_TX_SEL is set to 46 If control-field UA1_TX_SEL is set to 3, TX pin of UART_1 will be
47 routed to GPIO 10 (3 - 1 + 8 = 10). 47 routed to GPIO 10 (3 - 1 + 8 = 10).
48 If control-field UA1_RX_SEL is set to 48 If control-field UA1_RX_SEL is set to 4, RX pin of UART_1 will be
49 routed to GPIO 11 (4 - 1 + 8 = 11). 49 routed to GPIO 11 (4 - 1 + 8 = 11).
50 If control-field UA1_RTS_SEL is set to 50 If control-field UA1_RTS_SEL is set to 5, RTS pin of UART_1 will
51 be routed to GPIO 12 (5 - 1 + 8 = 12). 51 be routed to GPIO 12 (5 - 1 + 8 = 12).
52 If control-field UA1_CTS_SEL is set to 52 If control-field UA1_CTS_SEL is set to 6, CTS pin of UART_1 will
53 be routed to GPIO 13 (6 - 1 + 8 = 13). 53 be routed to GPIO 13 (6 - 1 + 8 = 13).
54 54
55 Ex 2 (I2C channel 0): 55 Ex 2 (I2C channel 0):
56 If control-field I2C0_CLK_SEL is set t 56 If control-field I2C0_CLK_SEL is set to 20, CLK pin of I2C_0 will
57 be routed to GPIO 27 (20 - 1 + 8 = 27) 57 be routed to GPIO 27 (20 - 1 + 8 = 27).
58 If control-field I2C0_DATA_SEL is set 58 If control-field I2C0_DATA_SEL is set to 21, DATA pin of I2C_0
59 will be routed to GPIO 28 (21 - 1 + 9 59 will be routed to GPIO 28 (21 - 1 + 9 = 28).
60 60
61 Totally, SP7021 has 120 peripheral pins. 61 Totally, SP7021 has 120 peripheral pins. The peripheral pins can be
62 routed to any of 64 'fully pin-mux' pins 62 routed to any of 64 'fully pin-mux' pins.
63 63
64 (3) I/O processor pins 64 (3) I/O processor pins
65 SP7021 has a built-in I/O processor. 65 SP7021 has a built-in I/O processor.
66 Any GPIO pins (GPIO 0 to 98) can be set 66 Any GPIO pins (GPIO 0 to 98) can be set to pins of I/O processor.
67 67
68 Vendor property "sunplus,pins" is used to se 68 Vendor property "sunplus,pins" is used to select "fully pin-mux" pins,
69 "I/O processor pins" and "digital GPIO" pins 69 "I/O processor pins" and "digital GPIO" pins.
70 70
71 The device node of pin controller of Sunplus 71 The device node of pin controller of Sunplus SP7021 has following
72 properties. 72 properties.
73 73
74 properties: 74 properties:
75 compatible: 75 compatible:
76 const: sunplus,sp7021-pctl 76 const: sunplus,sp7021-pctl
77 77
78 gpio-controller: true 78 gpio-controller: true
79 79
80 '#gpio-cells': 80 '#gpio-cells':
81 const: 2 81 const: 2
82 82
83 reg: 83 reg:
84 items: 84 items:
85 - description: the MOON2 registers 85 - description: the MOON2 registers
86 - description: the GPIOXT registers 86 - description: the GPIOXT registers
87 - description: the FIRST registers 87 - description: the FIRST registers
88 - description: the MOON1 registers 88 - description: the MOON1 registers
89 89
90 reg-names: 90 reg-names:
91 items: 91 items:
92 - const: moon2 92 - const: moon2
93 - const: gpioxt 93 - const: gpioxt
94 - const: first 94 - const: first
95 - const: moon1 95 - const: moon1
96 96
97 clocks: 97 clocks:
98 maxItems: 1 98 maxItems: 1
99 99
100 resets: 100 resets:
101 maxItems: 1 101 maxItems: 1
102 102
103 patternProperties: 103 patternProperties:
104 '-pins$': 104 '-pins$':
105 type: object 105 type: object
106 description: | 106 description: |
107 A pinctrl node should contain at least o 107 A pinctrl node should contain at least one subnodes representing the
108 pins or function-pins group available on 108 pins or function-pins group available on the machine. Each subnode
109 will list the pins it needs, and how the 109 will list the pins it needs, and how they should be configured.
110 110
111 Pinctrl node's client devices use subnod 111 Pinctrl node's client devices use subnodes for desired pin
112 configuration. Client device subnodes us 112 configuration. Client device subnodes use below standard properties.
113 $ref: pinmux-node.yaml# 113 $ref: pinmux-node.yaml#
114 114
115 properties: 115 properties:
116 sunplus,pins: 116 sunplus,pins:
117 description: | 117 description: |
118 Define 'sunplus,pins' which are used 118 Define 'sunplus,pins' which are used by pinctrl node's client
119 device. 119 device.
120 120
121 It consists of one or more integers 121 It consists of one or more integers which represents the config
122 setting for corresponding pin. Each 122 setting for corresponding pin. Each integer defines a individual
123 pin in which: 123 pin in which:
124 124
125 Bit 32~24: defines GPIO number. Its 125 Bit 32~24: defines GPIO number. Its range is 0 ~ 98.
126 Bit 23~16: defines types: (1) fully 126 Bit 23~16: defines types: (1) fully pin-mux pins
127 (2) IO pro 127 (2) IO processor pins
128 (3) digita 128 (3) digital GPIO pins
129 Bit 15~8: defines pins of periphera 129 Bit 15~8: defines pins of peripherals (which are defined in
130 'include/dt-binging/pinct 130 'include/dt-binging/pinctrl/sppctl.h').
131 Bit 7~0: defines types or initial- 131 Bit 7~0: defines types or initial-state of digital GPIO pins.
132 132
133 Please use macro SPPCTL_IOPAD to def 133 Please use macro SPPCTL_IOPAD to define the integers for pins.
134 134
135 $ref: /schemas/types.yaml#/definitions 135 $ref: /schemas/types.yaml#/definitions/uint32-array
136 136
137 function: 137 function:
138 description: | 138 description: |
139 Define pin-function which is used by 139 Define pin-function which is used by pinctrl node's client device.
140 The name should be one of string in 140 The name should be one of string in the following enumeration.
141 $ref: /schemas/types.yaml#/definitions !! 141 $ref: "/schemas/types.yaml#/definitions/string"
142 enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI 142 enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
143 UA0, FPGA_IFX, HDMI_TX, LCDIF, 143 UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
144 144
145 groups: 145 groups:
146 description: | 146 description: |
147 Define pin-group in a specified pin- 147 Define pin-group in a specified pin-function.
148 The name should be one of string in 148 The name should be one of string in the following enumeration.
149 $ref: /schemas/types.yaml#/definitions !! 149 $ref: "/schemas/types.yaml#/definitions/string"
150 enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FL 150 enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
151 SPI_NAND, CARD0_EMMC, SD_CARD, 151 SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
152 HDMI_TX2, HDMI_TX3, LCDIF, USB 152 HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
153 153
154 sunplus,zerofunc: 154 sunplus,zerofunc:
155 description: | 155 description: |
156 This is a vendor specific property. 156 This is a vendor specific property. It is used to disable pins
157 which are not used by pinctrl node's 157 which are not used by pinctrl node's client device.
158 Some pins may be enabled by boot-loa 158 Some pins may be enabled by boot-loader. We can use this
159 property to disable them. 159 property to disable them.
160 $ref: /schemas/types.yaml#/definitions 160 $ref: /schemas/types.yaml#/definitions/uint32-array
161 161
162 additionalProperties: false 162 additionalProperties: false
163 163
164 allOf: 164 allOf:
165 - if: 165 - if:
166 properties: 166 properties:
167 function: 167 function:
168 enum: 168 enum:
169 - SPI_FLASH 169 - SPI_FLASH
170 then: 170 then:
171 properties: 171 properties:
172 groups: 172 groups:
173 enum: 173 enum:
174 - SPI_FLASH1 174 - SPI_FLASH1
175 - SPI_FLASH2 175 - SPI_FLASH2
176 - if: 176 - if:
177 properties: 177 properties:
178 function: 178 function:
179 enum: 179 enum:
180 - SPI_FLASH_4BIT 180 - SPI_FLASH_4BIT
181 then: 181 then:
182 properties: 182 properties:
183 groups: 183 groups:
184 enum: 184 enum:
185 - SPI_FLASH_4BIT1 185 - SPI_FLASH_4BIT1
186 - SPI_FLASH_4BIT2 186 - SPI_FLASH_4BIT2
187 - if: 187 - if:
188 properties: 188 properties:
189 function: 189 function:
190 enum: 190 enum:
191 - SPI_NAND 191 - SPI_NAND
192 then: 192 then:
193 properties: 193 properties:
194 groups: 194 groups:
195 enum: 195 enum:
196 - SPI_NAND 196 - SPI_NAND
197 - if: 197 - if:
198 properties: 198 properties:
199 function: 199 function:
200 enum: 200 enum:
201 - CARD0_EMMC 201 - CARD0_EMMC
202 then: 202 then:
203 properties: 203 properties:
204 groups: 204 groups:
205 enum: 205 enum:
206 - CARD0_EMMC 206 - CARD0_EMMC
207 - if: 207 - if:
208 properties: 208 properties:
209 function: 209 function:
210 enum: 210 enum:
211 - SD_CARD 211 - SD_CARD
212 then: 212 then:
213 properties: 213 properties:
214 groups: 214 groups:
215 enum: 215 enum:
216 - SD_CARD 216 - SD_CARD
217 - if: 217 - if:
218 properties: 218 properties:
219 function: 219 function:
220 enum: 220 enum:
221 - UA0 221 - UA0
222 then: 222 then:
223 properties: 223 properties:
224 groups: 224 groups:
225 enum: 225 enum:
226 - UA0 226 - UA0
227 - if: 227 - if:
228 properties: 228 properties:
229 function: 229 function:
230 enum: 230 enum:
231 - FPGA_IFX 231 - FPGA_IFX
232 then: 232 then:
233 properties: 233 properties:
234 groups: 234 groups:
235 enum: 235 enum:
236 - FPGA_IFX 236 - FPGA_IFX
237 - if: 237 - if:
238 properties: 238 properties:
239 function: 239 function:
240 enum: 240 enum:
241 - HDMI_TX 241 - HDMI_TX
242 then: 242 then:
243 properties: 243 properties:
244 groups: 244 groups:
245 enum: 245 enum:
246 - HDMI_TX1 246 - HDMI_TX1
247 - HDMI_TX2 247 - HDMI_TX2
248 - HDMI_TX3 248 - HDMI_TX3
249 - if: 249 - if:
250 properties: 250 properties:
251 function: 251 function:
252 enum: 252 enum:
253 - LCDIF 253 - LCDIF
254 then: 254 then:
255 properties: 255 properties:
256 groups: 256 groups:
257 enum: 257 enum:
258 - LCDIF 258 - LCDIF
259 - if: 259 - if:
260 properties: 260 properties:
261 function: 261 function:
262 enum: 262 enum:
263 - USB0_OTG 263 - USB0_OTG
264 then: 264 then:
265 properties: 265 properties:
266 groups: 266 groups:
267 enum: 267 enum:
268 - USB0_OTG 268 - USB0_OTG
269 - if: 269 - if:
270 properties: 270 properties:
271 function: 271 function:
272 enum: 272 enum:
273 - USB1_OTG 273 - USB1_OTG
274 then: 274 then:
275 properties: 275 properties:
276 groups: 276 groups:
277 enum: 277 enum:
278 - USB1_OTG 278 - USB1_OTG
279 279
280 required: 280 required:
281 - compatible 281 - compatible
282 - reg 282 - reg
283 - reg-names 283 - reg-names
284 - "#gpio-cells" 284 - "#gpio-cells"
285 - gpio-controller 285 - gpio-controller
286 - clocks 286 - clocks
287 - resets 287 - resets
288 288
289 additionalProperties: false 289 additionalProperties: false
290 290
291 allOf: 291 allOf:
292 - $ref: pinctrl.yaml# !! 292 - $ref: "pinctrl.yaml#"
293 293
294 examples: 294 examples:
295 - | 295 - |
296 #include <dt-bindings/pinctrl/sppctl-sp702 296 #include <dt-bindings/pinctrl/sppctl-sp7021.h>
297 297
298 pinctrl@9c000100 { 298 pinctrl@9c000100 {
299 compatible = "sunplus,sp7021-pctl"; 299 compatible = "sunplus,sp7021-pctl";
300 reg = <0x9c000100 0x100>, <0x9c000300 300 reg = <0x9c000100 0x100>, <0x9c000300 0x100>,
301 <0x9c0032e4 0x1c>, <0x9c000080 0 301 <0x9c0032e4 0x1c>, <0x9c000080 0x20>;
302 reg-names = "moon2", "gpioxt", "first" 302 reg-names = "moon2", "gpioxt", "first", "moon1";
303 gpio-controller; 303 gpio-controller;
304 #gpio-cells = <2>; 304 #gpio-cells = <2>;
305 clocks = <&clkc 0x83>; 305 clocks = <&clkc 0x83>;
306 resets = <&rstc 0x73>; 306 resets = <&rstc 0x73>;
307 307
308 uart0-pins { 308 uart0-pins {
309 function = "UA0"; 309 function = "UA0";
310 groups = "UA0"; 310 groups = "UA0";
311 }; 311 };
312 312
313 spinand0-pins { 313 spinand0-pins {
314 function = "SPI_NAND"; 314 function = "SPI_NAND";
315 groups = "SPI_NAND"; 315 groups = "SPI_NAND";
316 }; 316 };
317 317
318 uart1-pins { 318 uart1-pins {
319 sunplus,pins = < 319 sunplus,pins = <
320 SPPCTL_IOPAD(11, SPPCTL_PCTL_G 320 SPPCTL_IOPAD(11, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
321 SPPCTL_IOPAD(10, SPPCTL_PCTL_G 321 SPPCTL_IOPAD(10, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
322 >; 322 >;
323 }; 323 };
324 324
325 uart2-pins { 325 uart2-pins {
326 sunplus,pins = < 326 sunplus,pins = <
327 SPPCTL_IOPAD(20, SPPCTL_PCTL_G 327 SPPCTL_IOPAD(20, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
328 SPPCTL_IOPAD(21, SPPCTL_PCTL_G 328 SPPCTL_IOPAD(21, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
329 SPPCTL_IOPAD(22, SPPCTL_PCTL_G 329 SPPCTL_IOPAD(22, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RTS, 0)
330 SPPCTL_IOPAD(23, SPPCTL_PCTL_G 330 SPPCTL_IOPAD(23, SPPCTL_PCTL_G_PMUX, MUXF_UA1_CTS, 0)
331 >; 331 >;
332 }; 332 };
333 333
334 emmc-pins { 334 emmc-pins {
335 function = "CARD0_EMMC"; 335 function = "CARD0_EMMC";
336 groups = "CARD0_EMMC"; 336 groups = "CARD0_EMMC";
337 }; 337 };
338 338
339 sdcard-pins { 339 sdcard-pins {
340 function = "SD_CARD"; 340 function = "SD_CARD";
341 groups = "SD_CARD"; 341 groups = "SD_CARD";
342 sunplus,pins = < SPPCTL_IOPAD(91, 342 sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
343 }; 343 };
344 344
345 hdmi_A_tx1-pins { 345 hdmi_A_tx1-pins {
346 function = "HDMI_TX"; 346 function = "HDMI_TX";
347 groups = "HDMI_TX1"; 347 groups = "HDMI_TX1";
348 }; 348 };
349 hdmi_A_tx2-pins { 349 hdmi_A_tx2-pins {
350 function = "HDMI_TX"; 350 function = "HDMI_TX";
351 groups = "HDMI_TX2"; 351 groups = "HDMI_TX2";
352 }; 352 };
353 hdmi_A_tx3-pins { 353 hdmi_A_tx3-pins {
354 function = "HDMI_TX"; 354 function = "HDMI_TX";
355 groups = "HDMI_TX3"; 355 groups = "HDMI_TX3";
356 }; 356 };
357 357
358 ethernet-pins { 358 ethernet-pins {
359 sunplus,pins = < 359 sunplus,pins = <
360 SPPCTL_IOPAD(49,SPPCTL_PCTL_G_ 360 SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
361 SPPCTL_IOPAD(44,SPPCTL_PCTL_G_ 361 SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
362 SPPCTL_IOPAD(43,SPPCTL_PCTL_G_ 362 SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
363 SPPCTL_IOPAD(52,SPPCTL_PCTL_G_ 363 SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
364 SPPCTL_IOPAD(50,SPPCTL_PCTL_G_ 364 SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
365 SPPCTL_IOPAD(51,SPPCTL_PCTL_G_ 365 SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
366 SPPCTL_IOPAD(46,SPPCTL_PCTL_G_ 366 SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
367 SPPCTL_IOPAD(47,SPPCTL_PCTL_G_ 367 SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
368 SPPCTL_IOPAD(48,SPPCTL_PCTL_G_ 368 SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
369 >; 369 >;
370 sunplus,zerofunc = < 370 sunplus,zerofunc = <
371 MUXF_L2SW_LED_FLASH0 371 MUXF_L2SW_LED_FLASH0
372 MUXF_L2SW_LED_ON0 372 MUXF_L2SW_LED_ON0
373 MUXF_L2SW_P0_MAC_RMII_RXER 373 MUXF_L2SW_P0_MAC_RMII_RXER
374 >; 374 >;
375 }; 375 };
376 }; 376 };
377 ... 377 ...
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.