1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-C 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2 # Copyright (C) 2020 Texas Instruments Incorpo 2 # Copyright (C) 2020 Texas Instruments Incorporated
3 %YAML 1.2 3 %YAML 1.2
4 --- 4 ---
5 $id: http://devicetree.org/schemas/power/suppl 5 $id: http://devicetree.org/schemas/power/supply/bq2515x.yaml#
6 $schema: http://devicetree.org/meta-schemas/co 6 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 7
8 title: TI bq2515x 500-mA Linear charger family 8 title: TI bq2515x 500-mA Linear charger family
9 9
10 maintainers: 10 maintainers:
11 - Andrew Davis <afd@ti.com> 11 - Andrew Davis <afd@ti.com>
12 12
13 description: | 13 description: |
14 The BQ2515x family is a highly integrated ba 14 The BQ2515x family is a highly integrated battery charge management IC that
15 integrates the most common functions for wea 15 integrates the most common functions for wearable devices, namely a charger,
16 an output voltage rail, ADC for battery and 16 an output voltage rail, ADC for battery and system monitoring, and
17 push-button controller. 17 push-button controller.
18 18
19 Specifications about the charger can be foun 19 Specifications about the charger can be found at:
20 http://www.ti.com/lit/ds/symlink/bq25150.p 20 http://www.ti.com/lit/ds/symlink/bq25150.pdf
21 http://www.ti.com/lit/ds/symlink/bq25155.p 21 http://www.ti.com/lit/ds/symlink/bq25155.pdf
22 22
23 properties: 23 properties:
24 compatible: 24 compatible:
25 enum: 25 enum:
26 - ti,bq25150 26 - ti,bq25150
27 - ti,bq25155 27 - ti,bq25155
28 28
29 reg: 29 reg:
30 maxItems: 1 30 maxItems: 1
31 description: I2C address of the charger. 31 description: I2C address of the charger.
32 32
33 ac-detect-gpios: 33 ac-detect-gpios:
34 description: | 34 description: |
35 GPIO used for connecting the bq2515x de 35 GPIO used for connecting the bq2515x device PG (AC Detect)
36 pin. 36 pin.
37 maxItems: 1 37 maxItems: 1
38 38
39 reset-gpios: 39 reset-gpios:
40 description: GPIO used for hardware reset. 40 description: GPIO used for hardware reset.
41 maxItems: 1 41 maxItems: 1
42 42
43 powerdown-gpios: 43 powerdown-gpios:
44 description: GPIO used for low power mode 44 description: GPIO used for low power mode of IC.
45 maxItems: 1 45 maxItems: 1
46 46
47 charge-enable-gpios: 47 charge-enable-gpios:
48 description: GPIO used to turn on and off 48 description: GPIO used to turn on and off charging.
49 maxItems: 1 49 maxItems: 1
50 50
51 input-current-limit-microamp: 51 input-current-limit-microamp:
52 description: Maximum input current in micr 52 description: Maximum input current in micro Amps.
53 minimum: 50000 53 minimum: 50000
54 maximum: 500000 54 maximum: 500000
55 55
56 monitored-battery: 56 monitored-battery:
57 $ref: /schemas/types.yaml#/definitions/pha 57 $ref: /schemas/types.yaml#/definitions/phandle
58 description: phandle to the battery node b 58 description: phandle to the battery node being monitored
59 59
60 required: 60 required:
61 - compatible 61 - compatible
62 - reg 62 - reg
63 - monitored-battery 63 - monitored-battery
64 64
65 additionalProperties: false 65 additionalProperties: false
66 66
67 examples: 67 examples:
68 - | 68 - |
69 bat: battery { 69 bat: battery {
70 compatible = "simple-battery"; 70 compatible = "simple-battery";
71 constant-charge-current-max-microamp = < 71 constant-charge-current-max-microamp = <50000>;
72 precharge-current-microamp = <2500>; 72 precharge-current-microamp = <2500>;
73 constant-charge-voltage-max-microvolt = 73 constant-charge-voltage-max-microvolt = <4000000>;
74 }; 74 };
75 #include <dt-bindings/gpio/gpio.h> 75 #include <dt-bindings/gpio/gpio.h>
76 i2c { 76 i2c {
77 #address-cells = <1>; 77 #address-cells = <1>;
78 #size-cells = <0>; 78 #size-cells = <0>;
79 79
80 bq25150: charger@6b { 80 bq25150: charger@6b {
81 compatible = "ti,bq25150"; 81 compatible = "ti,bq25150";
82 reg = <0x6b>; 82 reg = <0x6b>;
83 monitored-battery = <&bat>; 83 monitored-battery = <&bat>;
84 input-current-limit-microamp = <100000 84 input-current-limit-microamp = <100000>;
85 85
86 ac-detect-gpios = <&gpio1 28 GPIO_ACTI 86 ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
87 reset-gpios = <&gpio0 14 GPIO_ACTIVE_H 87 reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
88 powerdown-gpios = <&gpio0 15 GPIO_ACTI 88 powerdown-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
89 charge-enable-gpios = <&gpio0 13 GPIO_ 89 charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
90 }; 90 };
91 }; 91 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.