1 * Chipselect/Local Bus
2
3 Properties:
4 - name : Should be localbus
5 - #address-cells : Should be either two or thr
6 chipselect number, and the
7 offset into the chipselect.
8 - #size-cells : Either one or two, depending o
9 can be.
10 - ranges : Each range corresponds to a single
11 the entire access window as configu
12
13 Example:
14 localbus@f0010100 {
15 compatible = "fsl,mpc8272-loca
16 "fsl,pq2-localbus";
17 #address-cells = <2>;
18 #size-cells = <1>;
19 reg = <0xf0010100 0x40>;
20
21 ranges = <0x0 0x0 0xfe000000 0
22 0x1 0x0 0xf4500000 0
23 0x2 0x0 0xfd810000 0
24
25 flash@0,0 {
26 compatible = "jedec-fl
27 reg = <0x0 0x0 0x20000
28 bank-width = <4>;
29 device-width = <1>;
30 };
31
32 board-control@1,0 {
33 reg = <0x1 0x0 0x20>;
34 compatible = "fsl,mpc8
35 };
36
37 simple-periph@2,0 {
38 compatible = "fsl,elbc
39 reg = <0x2 0x0 0x10000
40 elbc-gpcm-br = <0xfd81
41 elbc-gpcm-or = <0xffff
42 };
43 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.