1 MPC5200 Device Tree Bindings 1 MPC5200 Device Tree Bindings
2 ---------------------------- 2 ----------------------------
3 3
4 (c) 2006-2009 Secret Lab Technologies Ltd 4 (c) 2006-2009 Secret Lab Technologies Ltd
5 Grant Likely <grant.likely@secretlab.ca> 5 Grant Likely <grant.likely@secretlab.ca>
6 6
7 Naming conventions 7 Naming conventions
8 ------------------ 8 ------------------
9 For mpc5200 on-chip devices, the format for ea 9 For mpc5200 on-chip devices, the format for each compatible value is
10 <chip>-<device>[-<mode>]. The OS should be ab 10 <chip>-<device>[-<mode>]. The OS should be able to match a device driver
11 to the device based solely on the compatible v 11 to the device based solely on the compatible value. If two drivers
12 match on the compatible list; the 'most compat 12 match on the compatible list; the 'most compatible' driver should be
13 selected. 13 selected.
14 14
15 The split between the MPC5200 and the MPC5200B 15 The split between the MPC5200 and the MPC5200B leaves a bit of a
16 conundrum. How should the compatible property 16 conundrum. How should the compatible property be set up to provide
17 maximum compatibility information; but still a 17 maximum compatibility information; but still accurately describe the
18 chip? For the MPC5200; the answer is easy. M 18 chip? For the MPC5200; the answer is easy. Most of the SoC devices
19 originally appeared on the MPC5200. Since the 19 originally appeared on the MPC5200. Since they didn't exist anywhere
20 else; the 5200 compatible properties will cont 20 else; the 5200 compatible properties will contain only one item;
21 "fsl,mpc5200-<device>". 21 "fsl,mpc5200-<device>".
22 22
23 The 5200B is almost the same as the 5200, but 23 The 5200B is almost the same as the 5200, but not quite. It fixes
24 silicon bugs and it adds a small number of enh 24 silicon bugs and it adds a small number of enhancements. Most of the
25 devices either provide exactly the same interf 25 devices either provide exactly the same interface as on the 5200. A few
26 devices have extra functions but still have a 26 devices have extra functions but still have a backwards compatible mode.
27 To express this information as completely as p 27 To express this information as completely as possible, 5200B device trees
28 should have two items in the compatible list: 28 should have two items in the compatible list:
29 compatible = "fsl,mpc5200b-<device>"," 29 compatible = "fsl,mpc5200b-<device>","fsl,mpc5200-<device>";
30 30
31 It is *strongly* recommended that 5200B device 31 It is *strongly* recommended that 5200B device trees follow this convention
32 (instead of only listing the base mpc5200 item 32 (instead of only listing the base mpc5200 item).
33 33
34 ie. ethernet on mpc5200: compatible = "fsl,mpc 34 ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec";
35 ethernet on mpc5200b: compatible = "fsl,mp 35 ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec";
36 36
37 Modal devices, like PSCs, also append the conf 37 Modal devices, like PSCs, also append the configured function to the
38 end of the compatible field. ie. A PSC in i2s 38 end of the compatible field. ie. A PSC in i2s mode would specify
39 "fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s". 39 "fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s". This convention is chosen to
40 avoid naming conflicts with non-psc devices pr 40 avoid naming conflicts with non-psc devices providing the same
41 function. For example, "fsl,mpc5200-spi" and 41 function. For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe
42 the mpc5200 simple spi device and a PSC spi mo 42 the mpc5200 simple spi device and a PSC spi mode respectively.
43 43
44 At the time of writing, exact chip may be eith 44 At the time of writing, exact chip may be either 'fsl,mpc5200' or
45 'fsl,mpc5200b'. 45 'fsl,mpc5200b'.
46 46
47 The soc node 47 The soc node
48 ------------ 48 ------------
49 This node describes the on chip SOC peripheral 49 This node describes the on chip SOC peripherals. Every mpc5200 based
50 board will have this node, and as such there i 50 board will have this node, and as such there is a common naming
51 convention for SOC devices. 51 convention for SOC devices.
52 52
53 Required properties: 53 Required properties:
54 name description 54 name description
55 ---- ----------- 55 ---- -----------
56 ranges Memory range of the in 56 ranges Memory range of the internal memory mapped registers.
57 Should be <0 [baseaddr 57 Should be <0 [baseaddr] 0xc000>
58 reg Should be <[baseaddr] 58 reg Should be <[baseaddr] 0x100>
59 compatible mpc5200: "fsl,mpc5200- 59 compatible mpc5200: "fsl,mpc5200-immr"
60 mpc5200b: "fsl,mpc5200 60 mpc5200b: "fsl,mpc5200b-immr"
61 system-frequency 'fsystem' frequency in 61 system-frequency 'fsystem' frequency in Hz; XLB, IPB, USB and PCI
62 clocks are derived fro 62 clocks are derived from the fsystem clock.
63 bus-frequency IPB bus frequency in H 63 bus-frequency IPB bus frequency in Hz. Clock rate
64 used by most of the so 64 used by most of the soc devices.
65 65
66 soc child nodes 66 soc child nodes
67 --------------- 67 ---------------
68 Any on chip SOC devices available to Linux mus 68 Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
69 69
70 Note: The tables below show the value for the 70 Note: The tables below show the value for the mpc5200. A mpc5200b device
71 tree should use the "fsl,mpc5200b-<device>","f 71 tree should use the "fsl,mpc5200b-<device>","fsl,mpc5200-<device>" form.
72 72
73 Required soc5200 child nodes: 73 Required soc5200 child nodes:
74 name compatible 74 name compatible Description
75 ---- ---------- 75 ---- ---------- -----------
76 cdm@<addr> fsl,mpc5200-cd 76 cdm@<addr> fsl,mpc5200-cdm Clock Distribution
77 interrupt-controller@<addr> fsl,mpc5200-pi 77 interrupt-controller@<addr> fsl,mpc5200-pic need an interrupt
78 78 controller to boot
79 bestcomm@<addr> fsl,mpc5200-be 79 bestcomm@<addr> fsl,mpc5200-bestcomm Bestcomm DMA controller
80 80
81 Recommended soc5200 child nodes; populate as n 81 Recommended soc5200 child nodes; populate as needed for your board
82 name compatible Descri 82 name compatible Description
83 ---- ---------- ------ 83 ---- ---------- -----------
84 timer@<addr> fsl,mpc5200-gpt Gener 84 timer@<addr> fsl,mpc5200-gpt General purpose timers
85 gpio@<addr> fsl,mpc5200-gpio MPC52 85 gpio@<addr> fsl,mpc5200-gpio MPC5200 simple gpio controller
86 gpio@<addr> fsl,mpc5200-gpio-wkup MPC52 86 gpio@<addr> fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio controller
87 rtc@<addr> fsl,mpc5200-rtc Real 87 rtc@<addr> fsl,mpc5200-rtc Real time clock
88 mscan@<addr> fsl,mpc5200-mscan CAN b 88 mscan@<addr> fsl,mpc5200-mscan CAN bus controller
89 pci@<addr> fsl,mpc5200-pci PCI b 89 pci@<addr> fsl,mpc5200-pci PCI bridge
90 serial@<addr> fsl,mpc5200-psc-uart PSC i 90 serial@<addr> fsl,mpc5200-psc-uart PSC in serial mode
91 i2s@<addr> fsl,mpc5200-psc-i2s PSC i 91 i2s@<addr> fsl,mpc5200-psc-i2s PSC in i2s mode
92 ac97@<addr> fsl,mpc5200-psc-ac97 PSC i 92 ac97@<addr> fsl,mpc5200-psc-ac97 PSC in ac97 mode
93 spi@<addr> fsl,mpc5200-psc-spi PSC i 93 spi@<addr> fsl,mpc5200-psc-spi PSC in spi mode
94 irda@<addr> fsl,mpc5200-psc-irda PSC i 94 irda@<addr> fsl,mpc5200-psc-irda PSC in IrDA mode
95 spi@<addr> fsl,mpc5200-spi MPC52 95 spi@<addr> fsl,mpc5200-spi MPC5200 spi device
96 ethernet@<addr> fsl,mpc5200-fec MPC52 96 ethernet@<addr> fsl,mpc5200-fec MPC5200 ethernet device
97 ata@<addr> fsl,mpc5200-ata IDE A 97 ata@<addr> fsl,mpc5200-ata IDE ATA interface
98 i2c@<addr> fsl,mpc5200-i2c I2C c 98 i2c@<addr> fsl,mpc5200-i2c I2C controller
99 usb@<addr> fsl,mpc5200-ohci,ohci-be USB c 99 usb@<addr> fsl,mpc5200-ohci,ohci-be USB controller
100 xlb@<addr> fsl,mpc5200-xlb XLB a 100 xlb@<addr> fsl,mpc5200-xlb XLB arbitrator
101 101
102 fsl,mpc5200-gpt nodes 102 fsl,mpc5200-gpt nodes
103 --------------------- 103 ---------------------
104 On the mpc5200 and 5200b, GPT0 has a watchdog 104 On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board
105 design supports the internal wdt, then the dev 105 design supports the internal wdt, then the device node for GPT0 should
106 include the empty property 'fsl,has-wdt'. Not 106 include the empty property 'fsl,has-wdt'. Note that this does not activate
107 the watchdog. The timer will function as a GP 107 the watchdog. The timer will function as a GPT if the timer api is used, and
108 it will function as watchdog if the watchdog d 108 it will function as watchdog if the watchdog device is used. The watchdog
109 mode has priority over the gpt mode, i.e. if t 109 mode has priority over the gpt mode, i.e. if the watchdog is activated, any
110 gpt api call to this timer will fail with -EBU 110 gpt api call to this timer will fail with -EBUSY.
111 111
112 If you add the property 112 If you add the property
113 fsl,wdt-on-boot = <n>; 113 fsl,wdt-on-boot = <n>;
114 GPT0 will be marked as in-use watchdog, i.e. b 114 GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to it.
115 If n>0, the watchdog is started with a timeout 115 If n>0, the watchdog is started with a timeout of n seconds. If n=0, the
116 configuration of the watchdog is not touched. 116 configuration of the watchdog is not touched. This is useful in two cases:
117 - just mark GPT0 as watchdog, blocking gpt acc 117 - just mark GPT0 as watchdog, blocking gpt accesses, and configure it later;
118 - do not touch a configuration assigned by the 118 - do not touch a configuration assigned by the boot loader which supervises
119 the boot process itself. 119 the boot process itself.
120 120
121 The watchdog will respect the CONFIG_WATCHDOG_ 121 The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option.
122 122
123 An mpc5200-gpt can be used as a single line GP 123 An mpc5200-gpt can be used as a single line GPIO controller. To do so,
124 add the following properties to the gpt node: 124 add the following properties to the gpt node:
125 gpio-controller; 125 gpio-controller;
126 #gpio-cells = <2>; 126 #gpio-cells = <2>;
127 When referencing the GPIO line from another no 127 When referencing the GPIO line from another node, the first cell must always
128 be zero and the second cell represents the gpi 128 be zero and the second cell represents the gpio flags and described in the
129 gpio device tree binding. 129 gpio device tree binding.
130 130
131 An mpc5200-gpt can be used as a single line ed 131 An mpc5200-gpt can be used as a single line edge sensitive interrupt
132 controller. To do so, add the following prope 132 controller. To do so, add the following properties to the gpt node:
133 interrupt-controller; 133 interrupt-controller;
134 #interrupt-cells = <1>; 134 #interrupt-cells = <1>;
135 When referencing the IRQ line from another nod 135 When referencing the IRQ line from another node, the cell represents the
136 sense mode; 1 for edge rising, 2 for edge fall 136 sense mode; 1 for edge rising, 2 for edge falling.
137 137
138 fsl,mpc5200-psc nodes 138 fsl,mpc5200-psc nodes
139 --------------------- 139 ---------------------
140 The PSCs should include a cell-index which is 140 The PSCs should include a cell-index which is the index of the PSC in
141 hardware. cell-index is used to determine whi 141 hardware. cell-index is used to determine which shared SoC registers to
142 use when setting up PSC clocking. cell-index 142 use when setting up PSC clocking. cell-index number starts at '0'. ie:
143 PSC1 has 'cell-index = <0>' 143 PSC1 has 'cell-index = <0>'
144 PSC4 has 'cell-index = <3>' 144 PSC4 has 'cell-index = <3>'
145 145
146 PSC in i2s mode: The mpc5200 and mpc5200b PSC 146 PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in
147 i2s mode. An 'mpc5200b-psc-i2s' node cannot i 147 i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the
148 compatible field. 148 compatible field.
149 149
150 150
151 fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nod 151 fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes
152 ---------------------------------------------- 152 ------------------------------------------------
153 Each GPIO controller node should have the empt 153 Each GPIO controller node should have the empty property gpio-controller and
154 #gpio-cells set to 2. First cell is the GPIO n 154 #gpio-cells set to 2. First cell is the GPIO number which is interpreted
155 according to the bit numbers in the GPIO contr 155 according to the bit numbers in the GPIO control registers. The second cell
156 is for flags which is currently unused. 156 is for flags which is currently unused.
157 157
158 fsl,mpc5200-fec nodes 158 fsl,mpc5200-fec nodes
159 --------------------- 159 ---------------------
160 The FEC node can specify one of the following 160 The FEC node can specify one of the following properties to configure
161 the MII link: 161 the MII link:
162 - fsl,7-wire-mode - An empty property that spe 162 - fsl,7-wire-mode - An empty property that specifies the link uses 7-wire
163 mode instead of MII 163 mode instead of MII
164 - current-speed - Specifies that the MII sho 164 - current-speed - Specifies that the MII should be configured for a fixed
165 speed. This property shou 165 speed. This property should contain two cells. The
166 first cell specifies the s 166 first cell specifies the speed in Mbps and the second
167 should be '0' for half dup 167 should be '0' for half duplex and '1' for full duplex
168 - phy-handle - Contains a phandle to an E 168 - phy-handle - Contains a phandle to an Ethernet PHY.
169 169
170 Interrupt controller (fsl,mpc5200-pic) node 170 Interrupt controller (fsl,mpc5200-pic) node
171 ------------------------------------------- 171 -------------------------------------------
172 The mpc5200 pic binding splits hardware IRQ nu 172 The mpc5200 pic binding splits hardware IRQ numbers into two levels. The
173 split reflects the layout of the PIC hardware 173 split reflects the layout of the PIC hardware itself, which groups
174 interrupts into one of three groups; CRIT, MAI 174 interrupts into one of three groups; CRIT, MAIN or PERP. Also, the
175 Bestcomm dma engine has its own set of interru 175 Bestcomm dma engine has its own set of interrupt sources which are
176 cascaded off of peripheral interrupt 0, which 176 cascaded off of peripheral interrupt 0, which the driver interprets as a
177 fourth group, SDMA. 177 fourth group, SDMA.
178 178
179 The interrupts property for device nodes using 179 The interrupts property for device nodes using the mpc5200 pic consists
180 of three cells; <L1 L2 level> 180 of three cells; <L1 L2 level>
181 181
182 L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] 182 L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
183 L2 := interrupt number; directly mapped fr 183 L2 := interrupt number; directly mapped from the value in the
184 "ICTL PerStat, MainStat, CritStat En 184 "ICTL PerStat, MainStat, CritStat Encoded Register"
185 level := [LEVEL_HIGH=0, EDGE_RISING=1, EDG 185 level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]
186 186
187 For external IRQs, use the following interrupt 187 For external IRQs, use the following interrupt property values (how to
188 specify external interrupts is a frequently as 188 specify external interrupts is a frequently asked question):
189 External interrupts: 189 External interrupts:
190 external irq0: interrupts = <0 0 n>; 190 external irq0: interrupts = <0 0 n>;
191 external irq1: interrupts = <1 1 n>; 191 external irq1: interrupts = <1 1 n>;
192 external irq2: interrupts = <1 2 n>; 192 external irq2: interrupts = <1 2 n>;
193 external irq3: interrupts = <1 3 n>; 193 external irq3: interrupts = <1 3 n>;
194 'n' is sense (0: level high, 1: edge rising, 2 194 'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low)
195 195
196 fsl,mpc5200-mscan nodes 196 fsl,mpc5200-mscan nodes
197 ----------------------- 197 -----------------------
198 See file Documentation/devicetree/bindings/pow 198 See file Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.