1 * Nuvoton FLASH Interface Unit (FIU) SPI Contr 1 * Nuvoton FLASH Interface Unit (FIU) SPI Controller
2 2
3 NPCM FIU supports single, dual and quad commun 3 NPCM FIU supports single, dual and quad communication interface.
4 4
5 The NPCM7XX supports three FIU modules, 5 The NPCM7XX supports three FIU modules,
6 FIU0 and FIUx supports two chip selects, 6 FIU0 and FIUx supports two chip selects,
7 FIU3 support four chip select. 7 FIU3 support four chip select.
8 8
9 The NPCM8XX supports four FIU modules, 9 The NPCM8XX supports four FIU modules,
10 FIU0 and FIUx supports two chip selects, 10 FIU0 and FIUx supports two chip selects,
11 FIU1 and FIU3 supports four chip selects. 11 FIU1 and FIU3 supports four chip selects.
12 12
13 Required properties: 13 Required properties:
14 - compatible : "nuvoton,npcm750-fiu" for Pol 14 - compatible : "nuvoton,npcm750-fiu" for Poleg NPCM7XX BMC
15 "nuvoton,npcm845- 15 "nuvoton,npcm845-fiu" for Arbel NPCM8XX BMC
16 - #address-cells : should be 1. 16 - #address-cells : should be 1.
17 - #size-cells : should be 0. 17 - #size-cells : should be 0.
18 - reg : the first contains the register loca 18 - reg : the first contains the register location and length,
19 the second contains the memory mappi 19 the second contains the memory mapping address and length
20 - reg-names: Should contain the reg names "c 20 - reg-names: Should contain the reg names "control" and "memory"
21 - clocks : phandle of FIU reference clock. 21 - clocks : phandle of FIU reference clock.
22 22
23 Required properties in case the pins can be mu 23 Required properties in case the pins can be muxed:
24 - pinctrl-names : a pinctrl state named "def 24 - pinctrl-names : a pinctrl state named "default" must be defined.
25 - pinctrl-0 : phandle referencing pin config 25 - pinctrl-0 : phandle referencing pin configuration of the device.
26 26
27 Optional property: 27 Optional property:
28 - nuvoton,spix-mode: enable spix-mode for an 28 - nuvoton,spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD.
29 29
30 Aliases: 30 Aliases:
31 - All the FIU controller nodes should be repre 31 - All the FIU controller nodes should be represented in the aliases node using
32 the following format 'fiu{n}' where n is a u 32 the following format 'fiu{n}' where n is a unique number for the alias.
33 In the NPCM7XX BMC: 33 In the NPCM7XX BMC:
34 fiu0 represent fiu 0 controlle 34 fiu0 represent fiu 0 controller
35 fiu1 represent fiu 3 controlle 35 fiu1 represent fiu 3 controller
36 fiu2 represent fiu x controlle 36 fiu2 represent fiu x controller
37 37
38 In the NPCM8XX BMC: 38 In the NPCM8XX BMC:
39 fiu0 represent fiu 0 controlle 39 fiu0 represent fiu 0 controller
40 fiu1 represent fiu 1 controlle 40 fiu1 represent fiu 1 controller
41 fiu2 represent fiu 3 controlle 41 fiu2 represent fiu 3 controller
42 fiu3 represent fiu x controlle 42 fiu3 represent fiu x controller
43 43
44 Example: 44 Example:
45 fiu3: spi@c00000000 { 45 fiu3: spi@c00000000 {
46 compatible = "nuvoton,npcm750-fiu"; 46 compatible = "nuvoton,npcm750-fiu";
47 #address-cells = <1>; 47 #address-cells = <1>;
48 #size-cells = <0>; 48 #size-cells = <0>;
49 reg = <0xfb000000 0x1000>, <0x80000000 49 reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>;
50 reg-names = "control", "memory"; 50 reg-names = "control", "memory";
51 clocks = <&clk NPCM7XX_CLK_AHB>; 51 clocks = <&clk NPCM7XX_CLK_AHB>;
52 pinctrl-names = "default"; 52 pinctrl-names = "default";
53 pinctrl-0 = <&spi3_pins>; 53 pinctrl-0 = <&spi3_pins>;
54 flash@0 { 54 flash@0 {
55 ... 55 ...
56 }; 56 };
57 }; 57 };
58 58
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.