1 # SPDX-License-Identifier: (GPL-2.0-only OR BS
2 %YAML 1.2
3 ---
4 $id: http://devicetree.org/schemas/usb/chipide
5 $schema: http://devicetree.org/meta-schemas/co
6
7 title: NXP USB2 ChipIdea USB controller
8
9 maintainers:
10 - Xu Yang <xu.yang_2@nxp.com>
11
12 properties:
13 compatible:
14 oneOf:
15 - enum:
16 - fsl,imx27-usb
17 - items:
18 - enum:
19 - fsl,imx23-usb
20 - fsl,imx25-usb
21 - fsl,imx28-usb
22 - fsl,imx35-usb
23 - fsl,imx50-usb
24 - fsl,imx51-usb
25 - fsl,imx53-usb
26 - fsl,imx6q-usb
27 - fsl,imx6sl-usb
28 - fsl,imx6sx-usb
29 - fsl,imx6ul-usb
30 - fsl,imx7d-usb
31 - fsl,vf610-usb
32 - const: fsl,imx27-usb
33 - items:
34 - enum:
35 - fsl,imx8dxl-usb
36 - fsl,imx8ulp-usb
37 - const: fsl,imx7ulp-usb
38 - const: fsl,imx6ul-usb
39 - items:
40 - enum:
41 - fsl,imx8mm-usb
42 - fsl,imx8mn-usb
43 - fsl,imx93-usb
44 - const: fsl,imx7d-usb
45 - const: fsl,imx27-usb
46 - items:
47 - enum:
48 - fsl,imx6sll-usb
49 - fsl,imx7ulp-usb
50 - const: fsl,imx6ul-usb
51 - const: fsl,imx27-usb
52
53 reg:
54 maxItems: 1
55
56 interrupts:
57 maxItems: 1
58
59 clocks:
60 minItems: 1
61 maxItems: 3
62
63 clock-names:
64 minItems: 1
65 maxItems: 3
66
67 fsl,usbmisc:
68 description:
69 Phandler of non-core register device, wi
70 indicate usb controller index
71 $ref: /schemas/types.yaml#/definitions/pha
72 items:
73 - items:
74 - description: phandle to usbmisc no
75 - description: index of usb controll
76
77 disable-over-current:
78 type: boolean
79 description: disable over current detect
80
81 over-current-active-low:
82 type: boolean
83 description: over current signal polarity
84
85 over-current-active-high:
86 type: boolean
87 description:
88 Over current signal polarity is active h
89 specify the over current polarity.
90
91 power-active-high:
92 type: boolean
93 description: power signal polarity is acti
94
95 external-vbus-divider:
96 type: boolean
97 description: enables off-chip resistor div
98
99 samsung,picophy-pre-emp-curr-control:
100 description:
101 HS Transmitter Pre-Emphasis Current Cont
102 the amount of current sourced to the USB
103 pins after a J-to-K or K-to-J transition
104 0x3, the default value is 0x1. Details c
105 bits of USBNC_n_PHY_CFG1.
106 $ref: /schemas/types.yaml#/definitions/uin
107 minimum: 0x0
108 maximum: 0x3
109
110 samsung,picophy-dc-vol-level-adjust:
111 description:
112 HS DC Voltage Level Adjustment. Adjust t
113 level voltage. The range is from 0x0 to
114 0x3. Details can refer to TXVREFTUNE0 bi
115 $ref: /schemas/types.yaml#/definitions/uin
116 minimum: 0x0
117 maximum: 0xf
118
119 fsl,picophy-rise-fall-time-adjust:
120 description:
121 HS Transmitter Rise/Fall Time Adjustment
122 of the high-speed transmitter waveform.
123 time will be increased or decreased by a
124 to design default time. (0:-10%; 1:desig
125 Details can refer to TXRISETUNE0 bit of
126 $ref: /schemas/types.yaml#/definitions/uin
127 minimum: 0
128 maximum: 3
129 default: 1
130
131 fsl,usbphy:
132 description: phandle of usb phy that conne
133 $ref: /schemas/types.yaml#/definitions/pha
134 deprecated: true
135
136 required:
137 - compatible
138
139 allOf:
140 - $ref: chipidea,usb2-common.yaml#
141 - if:
142 properties:
143 phy_type:
144 const: hsic
145 required:
146 - phy_type
147 then:
148 properties:
149 pinctrl-names:
150 items:
151 - const: idle
152 - const: active
153
154 # imx27 Soc needs three clocks
155 - if:
156 properties:
157 compatible:
158 const: fsl,imx27-usb
159 then:
160 properties:
161 clocks:
162 minItems: 3
163 clock-names:
164 items:
165 - const: ipg
166 - const: ahb
167 - const: per
168
169 # imx25 and imx35 Soc need three clocks
170 - if:
171 properties:
172 compatible:
173 contains:
174 enum:
175 - fsl,imx25-usb
176 - fsl,imx35-usb
177 then:
178 properties:
179 clocks:
180 minItems: 3
181 clock-names:
182 items:
183 - const: ipg
184 - const: ahb
185 - const: per
186
187 # imx93 Soc needs two clocks
188 - if:
189 properties:
190 compatible:
191 contains:
192 enum:
193 - fsl,imx93-usb
194 then:
195 properties:
196 clocks:
197 minItems: 2
198 maxItems: 2
199 clock-names:
200 items:
201 - const: usb_ctrl_root
202 - const: usb_wakeup
203
204 # imx7d Soc need one clock
205 - if:
206 properties:
207 compatible:
208 items:
209 - const: fsl,imx7d-usb
210 - const: fsl,imx27-usb
211 then:
212 properties:
213 clocks:
214 maxItems: 1
215 clock-names: false
216
217 # other Soc need one clock
218 - if:
219 properties:
220 compatible:
221 contains:
222 enum:
223 - fsl,imx23-usb
224 - fsl,imx28-usb
225 - fsl,imx50-usb
226 - fsl,imx51-usb
227 - fsl,imx53-usb
228 - fsl,imx6q-usb
229 - fsl,imx6sl-usb
230 - fsl,imx6sx-usb
231 - fsl,imx6ul-usb
232 - fsl,imx8mm-usb
233 - fsl,imx8mn-usb
234 - fsl,vf610-usb
235 then:
236 properties:
237 clocks:
238 maxItems: 1
239 clock-names: false
240
241 unevaluatedProperties: false
242
243 examples:
244 - |
245 #include <dt-bindings/interrupt-controller
246 #include <dt-bindings/clock/imx7d-clock.h>
247
248 usb@30b10000 {
249 compatible = "fsl,imx7d-usb", "fsl,imx
250 reg = <0x30b10000 0x200>;
251 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVE
252 clocks = <&clks IMX7D_USB_CTRL_CLK>;
253 fsl,usbphy = <&usbphynop1>;
254 fsl,usbmisc = <&usbmisc1 0>;
255 phy-clkgate-delay-us = <400>;
256 };
257
258 # Example for HSIC:
259 - |
260 #include <dt-bindings/interrupt-controller
261 #include <dt-bindings/clock/imx6qdl-clock.
262
263 usb@2184400 {
264 compatible = "fsl,imx6q-usb", "fsl,imx
265 reg = <0x02184400 0x200>;
266 interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH
267 clocks = <&clks IMX6QDL_CLK_USBOH3>;
268 fsl,usbphy = <&usbphynop1>;
269 fsl,usbmisc = <&usbmisc 2>;
270 phy_type = "hsic";
271 dr_mode = "host";
272 ahb-burst-config = <0x0>;
273 tx-burst-size-dword = <0x10>;
274 rx-burst-size-dword = <0x10>;
275 pinctrl-names = "idle", "active";
276 pinctrl-0 = <&pinctrl_usbh2_idle>;
277 pinctrl-1 = <&pinctrl_usbh2_active>;
278 #address-cells = <1>;
279 #size-cells = <0>;
280
281 ethernet@1 {
282 compatible = "usb424,9730";
283 reg = <1>;
284 };
285 };
286
287 ...
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.