1 ==============================================
2 MOXA Smartio/Industio Family Device Driver Ins
3 ==============================================
4
5 Copyright (C) 2008, Moxa Inc.
6 Copyright (C) 2021, Jiri Slaby
7
8 .. Content
9
10 1. Introduction
11 2. System Requirement
12 3. Installation
13 3.1 Hardware installation
14 3.2 Device naming convention
15 4. Utilities
16 5. Setserial
17 6. Troubleshooting
18
19 1. Introduction
20 ^^^^^^^^^^^^^^^
21
22 The Smartio/Industio/UPCI family Linux driv
23 boards:
24
25 - 2 ports multiport board
26 CP-102U, CP-102UL, CP-102UF
27 CP-132U-I, CP-132UL,
28 CP-132, CP-132I, CP132S, CP-132IS,
29 (CP-102, CP-102S)
30
31 - 4 ports multiport board
32 CP-104EL,
33 CP-104UL, CP-104JU,
34 CP-134U, CP-134U-I,
35 C104H/PCI, C104HS/PCI,
36 CP-114, CP-114I, CP-114S, CP-114IS, CP
37 (C114HI, CT-114I),
38 POS-104UL,
39 CB-114,
40 CB-134I
41
42 - 8 ports multiport board
43 CP-118EL, CP-168EL,
44 CP-118U, CP-168U,
45 C168H/PCI,
46 CB-108
47
48 If a compatibility problem occurs, please c
49 support@moxa.com.tw.
50
51 In addition to device driver, useful utilit
52 version. They are:
53
54 - msdiag
55 Diagnostic program for displa
56 Smartio/Industio boards.
57 - msmon
58 Monitor program to observe da
59 - msterm A simple terminal program whi
60 ports.
61
62 All the drivers and utilities are published
63 GNU General Public License in this version.
64 Public License announcement in each source
65
66 In Moxa's Web sites, you may always find th
67 https://www.moxa.com/.
68
69 This version of driver can be installed as
70 or built-in into kernel (Static driver). Be
71 please refer to hardware installation proce
72
73 We assume the user should be familiar with
74
75 - Serial-HOWTO
76 - Kernel-HOWTO
77
78 2. System Requirement
79 ^^^^^^^^^^^^^^^^^^^^^
80
81 - Maximum 4 boards can be installed in comb
82
83 3. Installation
84 ^^^^^^^^^^^^^^^
85
86 3.1 Hardware installation
87 =========================
88
89 PCI/UPCI board
90 --------------
91
92 You may need to adjust IRQ usage in BIOS to
93 ISA devices. Please refer to hardware insta
94 Manual in advance.
95
96 PCI IRQ Sharing
97 ---------------
98
99 Each port within the same multiport board s
100 4 Moxa Smartio/Industio PCI Family multipor
101 together on one system and they can share t
102
103
104
105 3.2 Device naming convention
106 ============================
107
108 The device node is named "ttyMxx".
109
110 Device naming when more than 2 boards installe
111 ----------------------------------------------
112
113 Naming convention for each Smartio/Industio
114 pre-defined as below.
115
116 ============ ===============
117 Board Num. Device node
118 1st board ttyM0 - ttyM7
119 2nd board ttyM8 - ttyM15
120 3rd board ttyM16 - ttyM23
121 4th board ttyM24 - ttyM31
122 ============ ===============
123
124 4. Utilities
125 ^^^^^^^^^^^^
126
127 There are 3 utilities contained in this dri
128 msterm. These 3 utilities are released in f
129 be compiled into executable file and copied
130
131 msdiag - Diagnostic
132 ===================
133
134 This utility provides the function to displ
135 board was found by the driver in the system
136
137 msmon - Port Monitoring
138 =======================
139
140 This utility gives the user a quick view ab
141 activities. One can easily learn each port'
142 (Rx/Tx) character count since the time when
143
144 Rx/Tx throughputs per second are also repor
145 the last 5 seconds) and in average basis (s
146 is started). You can reset all ports' count
147 (plus/minus) keys to change the displaying
148 on the port, that cursor stay, to view the
149 parameters, signal status, and input/output
150
151 msterm - Terminal Emulation
152 ===========================
153
154 This utility provides data sending and rece
155 especially for MOXA ports. It is quite usef
156 application, for example, sending AT comman
157 port or used as a terminal for login purpos
158 dumb terminal emulation without handling fu
159
160 5. Setserial
161 ^^^^^^^^^^^^
162
163 Supported Setserial parameters are listed a
164
165 ============== ============================
166 uart set UART type(16450 --> disa
167 close_delay set the amount of time (in 1
168 should be kept low while bei
169 closing_wait set the amount of time (in 1
170 serial port should wait for
171 being closed, before the rec
172 spd_hi Use 57.6kb when the applicat
173 spd_vhi Use 115.2kb when the applica
174 spd_shi Use 230.4kb when the applica
175 spd_warp Use 460.8kb when the applica
176 spd_normal Use 38.4kb when the applicat
177 spd_cust Use the custom divisor to se
178 application requests 38.4kb.
179 divisor This option sets the custom
180 baud_base This option sets the base ba
181 ============== ============================
182
183 6. Troubleshooting
184 ^^^^^^^^^^^^^^^^^^
185
186 The boot time error messages and solutions
187 possible. If all the possible solutions fai
188 support team to get more help.
189
190
191 Error msg:
192 More than 4 Moxa Smartio/Industi
193 and after are ignored.
194
195 Solution:
196 To avoid this problem, please unplug fifth
197 driver supports up to 4 boards.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.