1 Kernel driver pmbus 1 Kernel driver pmbus
2 =================== 2 ===================
3 3
4 Supported chips: 4 Supported chips:
5 5
6 * Flex BMR310, BMR453, BMR454, BMR456, BMR45 !! 6 * Ericsson BMR453, BMR454
7 BMR490, BMR491, BMR492 <<
8 7
9 Prefixes: 'bmr310', 'bmr453', 'bmr454', 'b !! 8 Prefixes: 'bmr453', 'bmr454'
10 'bmr490', 'bmr491', 'bmr492' <<
11 9
12 Addresses scanned: - 10 Addresses scanned: -
13 11
14 Datasheets: !! 12 Datasheet:
15 <<
16 https://flexpowermodules.com/products <<
17 13
>> 14 http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146395
18 15
19 * ON Semiconductor ADP4000, NCP4200, NCP4208 16 * ON Semiconductor ADP4000, NCP4200, NCP4208
20 17
21 Prefixes: 'adp4000', 'ncp4200', 'ncp4208' 18 Prefixes: 'adp4000', 'ncp4200', 'ncp4208'
22 19
23 Addresses scanned: - 20 Addresses scanned: -
24 21
25 Datasheets: 22 Datasheets:
26 23
27 https://www.onsemi.com/pub_link/Collat !! 24 http://www.onsemi.com/pub_link/Collateral/ADP4000-D.PDF
28 25
29 https://www.onsemi.com/pub_link/Collat !! 26 http://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF
30 27
31 https://www.onsemi.com/pub_link/Collat !! 28 http://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF
32 29
33 * Lineage Power 30 * Lineage Power
34 31
35 Prefixes: 'mdt040', 'pdt003', 'pdt006', 'p 32 Prefixes: 'mdt040', 'pdt003', 'pdt006', 'pdt012', 'udt020'
36 33
37 Addresses scanned: - 34 Addresses scanned: -
38 35
39 Datasheets: 36 Datasheets:
40 37
41 http://www.lineagepower.com/oem/pdf/PD 38 http://www.lineagepower.com/oem/pdf/PDT003A0X.pdf
42 39
43 http://www.lineagepower.com/oem/pdf/PD 40 http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf
44 41
45 http://www.lineagepower.com/oem/pdf/PD 42 http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf
46 43
47 http://www.lineagepower.com/oem/pdf/UD 44 http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf
48 45
49 http://www.lineagepower.com/oem/pdf/MD 46 http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf
50 47
51 * Texas Instruments TPS40400, TPS544B20, TPS 48 * Texas Instruments TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25
52 49
53 Prefixes: 'tps40400', 'tps544b20', 'tps544 50 Prefixes: 'tps40400', 'tps544b20', 'tps544b25', 'tps544c20', 'tps544c25'
54 51
55 Addresses scanned: - 52 Addresses scanned: -
56 53
57 Datasheets: 54 Datasheets:
58 55
59 https://www.ti.com/lit/gpn/tps40400 !! 56 http://www.ti.com/lit/gpn/tps40400
60 57
61 https://www.ti.com/lit/gpn/tps544b20 !! 58 http://www.ti.com/lit/gpn/tps544b20
62 59
63 https://www.ti.com/lit/gpn/tps544b25 !! 60 http://www.ti.com/lit/gpn/tps544b25
64 61
65 https://www.ti.com/lit/gpn/tps544c20 !! 62 http://www.ti.com/lit/gpn/tps544c20
66 63
67 https://www.ti.com/lit/gpn/tps544c25 !! 64 http://www.ti.com/lit/gpn/tps544c25
68 65
69 * Maxim MAX20796 66 * Maxim MAX20796
70 67
71 Prefix: 'max20796' 68 Prefix: 'max20796'
72 69
73 Addresses scanned: - 70 Addresses scanned: -
74 71
75 Datasheet: 72 Datasheet:
76 73
77 Not published 74 Not published
78 75
79 * Generic PMBus devices 76 * Generic PMBus devices
80 77
81 Prefix: 'pmbus' 78 Prefix: 'pmbus'
82 79
83 Addresses scanned: - 80 Addresses scanned: -
84 81
85 Datasheet: n.a. 82 Datasheet: n.a.
86 83
87 84
88 Author: Guenter Roeck <linux@roeck-us.net> 85 Author: Guenter Roeck <linux@roeck-us.net>
89 86
90 87
91 Description 88 Description
92 ----------- 89 -----------
93 90
94 This driver supports hardware monitoring for v 91 This driver supports hardware monitoring for various PMBus compliant devices.
95 It supports voltage, current, power, and tempe 92 It supports voltage, current, power, and temperature sensors as supported
96 by the device. 93 by the device.
97 94
98 Each monitored channel has its own high and lo 95 Each monitored channel has its own high and low limits, plus a critical
99 limit. 96 limit.
100 97
101 Fan support will be added in a later version o 98 Fan support will be added in a later version of this driver.
102 99
103 100
104 Usage Notes 101 Usage Notes
105 ----------- 102 -----------
106 103
107 This driver does not probe for PMBus devices, 104 This driver does not probe for PMBus devices, since there is no register
108 which can be safely used to identify the chip 105 which can be safely used to identify the chip (The MFG_ID register is not
109 supported by all chips), and since there is no 106 supported by all chips), and since there is no well defined address range for
110 PMBus devices. You will have to instantiate th 107 PMBus devices. You will have to instantiate the devices explicitly.
111 108
112 Example: the following will load the driver fo 109 Example: the following will load the driver for an LTC2978 at address 0x60
113 on I2C bus #1:: 110 on I2C bus #1::
114 111
115 $ modprobe pmbus 112 $ modprobe pmbus
116 $ echo ltc2978 0x60 > /sys/bus/i2c/dev 113 $ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
117 114
118 115
119 Platform data support 116 Platform data support
120 --------------------- 117 ---------------------
121 118
122 Support for additional PMBus chips can be adde 119 Support for additional PMBus chips can be added by defining chip parameters in
123 a new chip specific driver file. For example, 120 a new chip specific driver file. For example, (untested) code to add support for
124 Emerson DS1200 power modules might look as fol 121 Emerson DS1200 power modules might look as follows::
125 122
126 static struct pmbus_driver_info ds1200_info 123 static struct pmbus_driver_info ds1200_info = {
127 .pages = 1, 124 .pages = 1,
128 /* Note: All other sensors are in line 125 /* Note: All other sensors are in linear mode */
129 .direct[PSC_VOLTAGE_OUT] = true, 126 .direct[PSC_VOLTAGE_OUT] = true,
130 .direct[PSC_TEMPERATURE] = true, 127 .direct[PSC_TEMPERATURE] = true,
131 .direct[PSC_CURRENT_OUT] = true, 128 .direct[PSC_CURRENT_OUT] = true,
132 .m[PSC_VOLTAGE_IN] = 1, 129 .m[PSC_VOLTAGE_IN] = 1,
133 .b[PSC_VOLTAGE_IN] = 0, 130 .b[PSC_VOLTAGE_IN] = 0,
134 .R[PSC_VOLTAGE_IN] = 3, 131 .R[PSC_VOLTAGE_IN] = 3,
135 .m[PSC_VOLTAGE_OUT] = 1, 132 .m[PSC_VOLTAGE_OUT] = 1,
136 .b[PSC_VOLTAGE_OUT] = 0, 133 .b[PSC_VOLTAGE_OUT] = 0,
137 .R[PSC_VOLTAGE_OUT] = 3, 134 .R[PSC_VOLTAGE_OUT] = 3,
138 .m[PSC_TEMPERATURE] = 1, 135 .m[PSC_TEMPERATURE] = 1,
139 .b[PSC_TEMPERATURE] = 0, 136 .b[PSC_TEMPERATURE] = 0,
140 .R[PSC_TEMPERATURE] = 3, 137 .R[PSC_TEMPERATURE] = 3,
141 .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE 138 .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT
142 | PMBUS_HAVE_VOUT | PMBUS_H 139 | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
143 | PMBUS_HAVE_IOUT | PMBUS_H 140 | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
144 | PMBUS_HAVE_PIN | PMBUS_HA 141 | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
145 | PMBUS_HAVE_TEMP | PMBUS_H 142 | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
146 | PMBUS_HAVE_FAN12 | PMBUS_ 143 | PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
147 }; 144 };
148 145
149 static int ds1200_probe(struct i2c_client *c !! 146 static int ds1200_probe(struct i2c_client *client,
>> 147 const struct i2c_device_id *id)
>> 148 {
>> 149 return pmbus_do_probe(client, id, &ds1200_info);
>> 150 }
>> 151
>> 152 static int ds1200_remove(struct i2c_client *client)
150 { 153 {
151 return pmbus_do_probe(client, &ds1200_ !! 154 return pmbus_do_remove(client);
152 } 155 }
153 156
154 static const struct i2c_device_id ds1200_id[ 157 static const struct i2c_device_id ds1200_id[] = {
155 {"ds1200"}, !! 158 {"ds1200", 0},
156 {} 159 {}
157 }; 160 };
158 161
159 MODULE_DEVICE_TABLE(i2c, ds1200_id); 162 MODULE_DEVICE_TABLE(i2c, ds1200_id);
160 163
161 /* This is the driver that will be inserted 164 /* This is the driver that will be inserted */
162 static struct i2c_driver ds1200_driver = { 165 static struct i2c_driver ds1200_driver = {
163 .driver = { 166 .driver = {
164 .name = "ds1200", 167 .name = "ds1200",
165 }, 168 },
166 .probe = ds1200_probe, 169 .probe = ds1200_probe,
>> 170 .remove = ds1200_remove,
167 .id_table = ds1200_id, 171 .id_table = ds1200_id,
168 }; 172 };
169 173
170 static int __init ds1200_init(void) 174 static int __init ds1200_init(void)
171 { 175 {
172 return i2c_add_driver(&ds1200_driver); 176 return i2c_add_driver(&ds1200_driver);
173 } 177 }
174 178
175 static void __exit ds1200_exit(void) 179 static void __exit ds1200_exit(void)
176 { 180 {
177 i2c_del_driver(&ds1200_driver); 181 i2c_del_driver(&ds1200_driver);
178 } 182 }
179 183
180 184
181 Sysfs entries 185 Sysfs entries
182 ------------- 186 -------------
183 187
184 When probing the chip, the driver identifies w 188 When probing the chip, the driver identifies which PMBus registers are
185 supported, and determines available sensors fr 189 supported, and determines available sensors from this information.
186 Attribute files only exist if respective senso 190 Attribute files only exist if respective sensors are supported by the chip.
187 Labels are provided to inform the user about t 191 Labels are provided to inform the user about the sensor associated with
188 a given sysfs entry. 192 a given sysfs entry.
189 193
190 The following attributes are supported. Limits 194 The following attributes are supported. Limits are read-write; all other
191 attributes are read-only. 195 attributes are read-only.
192 196
193 ======================= ====================== 197 ======================= ========================================================
194 inX_input Measured voltage. From 198 inX_input Measured voltage. From READ_VIN or READ_VOUT register.
195 inX_min Minimum Voltage. 199 inX_min Minimum Voltage.
196 From VIN_UV_WARN_LIMIT 200 From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register.
197 inX_max Maximum voltage. 201 inX_max Maximum voltage.
198 From VIN_OV_WARN_LIMIT 202 From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register.
199 inX_lcrit Critical minimum Volta 203 inX_lcrit Critical minimum Voltage.
200 From VIN_UV_FAULT_LIMI 204 From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register.
201 inX_crit Critical maximum volta 205 inX_crit Critical maximum voltage.
202 From VIN_OV_FAULT_LIMI 206 From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register.
203 inX_min_alarm Voltage low alarm. Fro 207 inX_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
204 inX_max_alarm Voltage high alarm. Fr 208 inX_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
205 inX_lcrit_alarm Voltage critical low a 209 inX_lcrit_alarm Voltage critical low alarm.
206 From VOLTAGE_UV_FAULT 210 From VOLTAGE_UV_FAULT status.
207 inX_crit_alarm Voltage critical high 211 inX_crit_alarm Voltage critical high alarm.
208 From VOLTAGE_OV_FAULT 212 From VOLTAGE_OV_FAULT status.
209 inX_label "vin", "vcap", or "vou 213 inX_label "vin", "vcap", or "voutY"
210 inX_rated_min Minimum rated voltage. <<
211 From MFR_VIN_MIN or MF <<
212 inX_rated_max Maximum rated voltage. <<
213 From MFR_VIN_MAX or MF <<
214 214
215 currX_input Measured current. From 215 currX_input Measured current. From READ_IIN or READ_IOUT register.
216 currX_max Maximum current. 216 currX_max Maximum current.
217 From IIN_OC_WARN_LIMIT 217 From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register.
218 currX_lcrit Critical minimum outpu 218 currX_lcrit Critical minimum output current.
219 From IOUT_UC_FAULT_LIM 219 From IOUT_UC_FAULT_LIMIT register.
220 currX_crit Critical maximum curre 220 currX_crit Critical maximum current.
221 From IIN_OC_FAULT_LIMI 221 From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.
222 currX_alarm Current high alarm. 222 currX_alarm Current high alarm.
223 From IIN_OC_WARNING or 223 From IIN_OC_WARNING or IOUT_OC_WARNING status.
224 currX_max_alarm Current high alarm. 224 currX_max_alarm Current high alarm.
225 From IIN_OC_WARN_LIMIT 225 From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status.
226 currX_lcrit_alarm Output current critica 226 currX_lcrit_alarm Output current critical low alarm.
227 From IOUT_UC_FAULT sta 227 From IOUT_UC_FAULT status.
228 currX_crit_alarm Current critical high 228 currX_crit_alarm Current critical high alarm.
229 From IIN_OC_FAULT or I 229 From IIN_OC_FAULT or IOUT_OC_FAULT status.
230 currX_label "iin", "iinY", "iinY.Z !! 230 currX_label "iin" or "ioutY"
231 where Y reflects the p <<
232 phase. <<
233 currX_rated_max Maximum rated current. <<
234 From MFR_IIN_MAX or MF <<
235 231
236 powerX_input Measured power. From R 232 powerX_input Measured power. From READ_PIN or READ_POUT register.
237 powerX_cap Output power cap. From 233 powerX_cap Output power cap. From POUT_MAX register.
238 powerX_max Power limit. From PIN_ 234 powerX_max Power limit. From PIN_OP_WARN_LIMIT or
239 POUT_OP_WARN_LIMIT reg 235 POUT_OP_WARN_LIMIT register.
240 powerX_crit Critical output power 236 powerX_crit Critical output power limit.
241 From POUT_OP_FAULT_LIM 237 From POUT_OP_FAULT_LIMIT register.
242 powerX_alarm Power high alarm. 238 powerX_alarm Power high alarm.
243 From PIN_OP_WARNING or 239 From PIN_OP_WARNING or POUT_OP_WARNING status.
244 powerX_crit_alarm Output power critical 240 powerX_crit_alarm Output power critical high alarm.
245 From POUT_OP_FAULT sta 241 From POUT_OP_FAULT status.
246 powerX_label "pin", "pinY", "pinY.Z !! 242 powerX_label "pin" or "poutY"
247 where Y reflects the p <<
248 phase. <<
249 powerX_rated_max Maximum rated power. <<
250 From MFR_PIN_MAX or MF <<
251 243
252 tempX_input Measured temperature. 244 tempX_input Measured temperature.
253 From READ_TEMPERATURE_ 245 From READ_TEMPERATURE_X register.
254 tempX_min Minimum temperature. F !! 246 tempX_min Mimimum temperature. From UT_WARN_LIMIT register.
255 tempX_max Maximum temperature. F 247 tempX_max Maximum temperature. From OT_WARN_LIMIT register.
256 tempX_lcrit Critical low temperatu 248 tempX_lcrit Critical low temperature.
257 From UT_FAULT_LIMIT re 249 From UT_FAULT_LIMIT register.
258 tempX_crit Critical high temperat 250 tempX_crit Critical high temperature.
259 From OT_FAULT_LIMIT re 251 From OT_FAULT_LIMIT register.
260 tempX_min_alarm Chip temperature low a 252 tempX_min_alarm Chip temperature low alarm. Set by comparing
261 READ_TEMPERATURE_X wit 253 READ_TEMPERATURE_X with UT_WARN_LIMIT if
262 TEMP_UT_WARNING status 254 TEMP_UT_WARNING status is set.
263 tempX_max_alarm Chip temperature high 255 tempX_max_alarm Chip temperature high alarm. Set by comparing
264 READ_TEMPERATURE_X wit 256 READ_TEMPERATURE_X with OT_WARN_LIMIT if
265 TEMP_OT_WARNING status 257 TEMP_OT_WARNING status is set.
266 tempX_lcrit_alarm Chip temperature criti 258 tempX_lcrit_alarm Chip temperature critical low alarm. Set by comparing
267 READ_TEMPERATURE_X wit 259 READ_TEMPERATURE_X with UT_FAULT_LIMIT if
268 TEMP_UT_FAULT status i 260 TEMP_UT_FAULT status is set.
269 tempX_crit_alarm Chip temperature criti 261 tempX_crit_alarm Chip temperature critical high alarm. Set by comparing
270 READ_TEMPERATURE_X wit 262 READ_TEMPERATURE_X with OT_FAULT_LIMIT if
271 TEMP_OT_FAULT status i 263 TEMP_OT_FAULT status is set.
272 tempX_rated_min Minimum rated temperat <<
273 From MFR_TAMBIENT_MIN <<
274 tempX_rated_max Maximum rated temperat <<
275 From MFR_TAMBIENT_MAX, <<
276 MFR_MAX_TEMP_3 registe <<
277 ======================= ====================== 264 ======================= ========================================================
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.