1 Kernel driver shtc1
2 ===================
3
4 Supported chips:
5
6 * Sensirion SHTC1
7
8 Prefix: 'shtc1'
9
10 Addresses scanned: none
11
12 Datasheet: https://www.sensirion.com/file/
13
14
15
16 * Sensirion SHTW1
17
18 Prefix: 'shtw1'
19
20 Addresses scanned: none
21
22 Datasheet: https://www.sensirion.com/file/
23
24
25
26 * Sensirion SHTC3
27
28 Prefix: 'shtc3'
29
30 Addresses scanned: none
31
32 Datasheet: https://www.sensirion.com/file/
33
34
35
36 Author:
37
38 Johannes Winkelmann <johannes.winkelmann@sens
39
40 Description
41 -----------
42
43 This driver implements support for the Sensiri
44 chips, a humidity and temperature sensor. Temp
45 celsius, relative humidity is expressed as a p
46
47 The device communicates with the I2C protocol.
48 address 0x70. See Documentation/i2c/instantiat
49 instantiate the device.
50
51 There are two options configurable by means of
52
53 1. blocking (pull the I2C clock line down whil
54 non-blocking mode. Blocking mode will guara
55 the I2C bus will be busy during that time.
56 is used. Make sure clock-stretching works p
57 want to use blocking mode.
58 2. high or low accuracy. High accuracy is used
59 strongly recommended.
60
61 sysfs-Interface
62 ---------------
63
64 temp1_input
65 - temperature input
66 humidity1_input
67 - humidity input
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.