1 .. SPDX-License-Identifier: GPL-2.0 1 .. SPDX-License-Identifier: GPL-2.0
2 2
3 Kernel driver stpddc60 3 Kernel driver stpddc60
4 ====================== 4 ======================
5 5
6 Supported chips: 6 Supported chips:
7 7
8 * ST STPDDC60 8 * ST STPDDC60
9 9
10 Prefix: 'stpddc60', 'bmr481' 10 Prefix: 'stpddc60', 'bmr481'
11 11
12 Addresses scanned: - 12 Addresses scanned: -
13 13
14 Datasheet: https://flexpowermodules.com/do 14 Datasheet: https://flexpowermodules.com/documents/fpm-techspec-bmr481
15 15
16 Author: Erik Rosen <erik.rosen@metormote.com> 16 Author: Erik Rosen <erik.rosen@metormote.com>
17 17
18 18
19 Description 19 Description
20 ----------- 20 -----------
21 21
22 This driver supports hardware monitoring for S 22 This driver supports hardware monitoring for ST STPDDC60 controller chip and
23 compatible modules. 23 compatible modules.
24 24
25 The driver is a client driver to the core PMBu 25 The driver is a client driver to the core PMBus driver. Please see
26 Documentation/hwmon/pmbus.rst and Documentatio 26 Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
27 on PMBus client drivers. 27 on PMBus client drivers.
28 28
29 29
30 Usage Notes 30 Usage Notes
31 ----------- 31 -----------
32 32
33 This driver does not auto-detect devices. You 33 This driver does not auto-detect devices. You will have to instantiate the
34 devices explicitly. Please see Documentation/i 34 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
35 details. 35 details.
36 36
37 The vout under- and over-voltage limits are se 37 The vout under- and over-voltage limits are set in relation to the commanded
38 output voltage as a positive or negative offse 38 output voltage as a positive or negative offset in the interval 50mV to 400mV
39 in 50mV steps. This means that the absolute va 39 in 50mV steps. This means that the absolute values of the limits will change
40 when the commanded output voltage changes. Als 40 when the commanded output voltage changes. Also, care should be taken when
41 writing to those limits since in the worst cas 41 writing to those limits since in the worst case the commanded output voltage
42 could change at the same time as the limit is !! 42 could change at the same time as the limit is written to, wich will lead to
43 unpredictable results. 43 unpredictable results.
44 44
45 45
46 Platform data support 46 Platform data support
47 --------------------- 47 ---------------------
48 48
49 The driver supports standard PMBus driver plat 49 The driver supports standard PMBus driver platform data.
50 50
51 51
52 Sysfs entries 52 Sysfs entries
53 ------------- 53 -------------
54 54
55 The following attributes are supported. Vin, i 55 The following attributes are supported. Vin, iout, pout and temp limits
56 are read-write; all other attributes are read- 56 are read-write; all other attributes are read-only.
57 57
58 ======================= ====================== 58 ======================= ========================================================
59 in1_label "vin" 59 in1_label "vin"
60 in1_input Measured input voltage 60 in1_input Measured input voltage.
61 in1_lcrit Critical minimum input 61 in1_lcrit Critical minimum input voltage.
62 in1_crit Critical maximum input 62 in1_crit Critical maximum input voltage.
63 in1_lcrit_alarm Input voltage critical 63 in1_lcrit_alarm Input voltage critical low alarm.
64 in1_crit_alarm Input voltage critical 64 in1_crit_alarm Input voltage critical high alarm.
65 65
66 in2_label "vout1" 66 in2_label "vout1"
67 in2_input Measured output voltag 67 in2_input Measured output voltage.
68 in2_lcrit Critical minimum outpu 68 in2_lcrit Critical minimum output voltage.
69 in2_crit Critical maximum outpu 69 in2_crit Critical maximum output voltage.
70 in2_lcrit_alarm Critical output voltag 70 in2_lcrit_alarm Critical output voltage critical low alarm.
71 in2_crit_alarm Critical output voltag 71 in2_crit_alarm Critical output voltage critical high alarm.
72 72
73 curr1_label "iout1" 73 curr1_label "iout1"
74 curr1_input Measured output curren 74 curr1_input Measured output current.
75 curr1_max Maximum output current 75 curr1_max Maximum output current.
76 curr1_max_alarm Output current high al 76 curr1_max_alarm Output current high alarm.
77 curr1_crit Critical maximum outpu 77 curr1_crit Critical maximum output current.
78 curr1_crit_alarm Output current critica 78 curr1_crit_alarm Output current critical high alarm.
79 79
80 power1_label "pout1" 80 power1_label "pout1"
81 power1_input Measured output power. 81 power1_input Measured output power.
82 power1_crit Critical maximum outpu 82 power1_crit Critical maximum output power.
83 power1_crit_alarm Output power critical 83 power1_crit_alarm Output power critical high alarm.
84 84
85 temp1_input Measured maximum tempe 85 temp1_input Measured maximum temperature of all phases.
86 temp1_max Maximum temperature li 86 temp1_max Maximum temperature limit.
87 temp1_max_alarm High temperature alarm 87 temp1_max_alarm High temperature alarm.
88 temp1_crit Critical maximum tempe 88 temp1_crit Critical maximum temperature limit.
89 temp1_crit_alarm Critical maximum tempe 89 temp1_crit_alarm Critical maximum temperature alarm.
90 ======================= ====================== 90 ======================= ========================================================
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.