1 Kernel driver tmp108
2 ====================
3
4 Supported chips:
5
6 * Texas Instruments TMP108
7
8 Prefix: 'tmp108'
9
10 Addresses scanned: none
11
12 Datasheet: https://www.ti.com/product/tmp1
13
14 Author:
15
16 John Muir <john@jmuir.com>
17
18 Description
19 -----------
20
21 The Texas Instruments TMP108 implements one te
22 can be set when temperatures exceed minimum or
23 hysteresis value. (This driver does not suppor
24 and the device runs in comparator mode.)
25
26 The sensor is accurate to 0.75C over the range
27 degree from -40 to +125 C. Resolution of the s
28 operating temperature has a minimum of -55 C a
29 Hysteresis values can be set to 0, 1, 2, or 4C
30
31 The TMP108 has a programmable update rate that
32 0.5 Hz.
33
34 By default the TMP108 reads the temperature co
35 the TMP108 has a one-shot mode where the devic
36 one shot is requested the temperature is read,
37 and then the device is shut down automatically
38 continuous mode.)
39
40 The driver provides the common sysfs-interface
41 Documentation/hwmon/sysfs-interface.rst under
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.