1 ======================== 1 ========================
2 Kernel driver i2c-ocores 2 Kernel driver i2c-ocores
3 ======================== 3 ========================
4 4
5 Supported adapters: 5 Supported adapters:
6 * OpenCores.org I2C controller by Richard He 6 * OpenCores.org I2C controller by Richard Herveille (see datasheet link)
7 https://opencores.org/project/i2c/overview 7 https://opencores.org/project/i2c/overview
8 8
9 Author: Peter Korsgaard <peter@korsgaard.com> 9 Author: Peter Korsgaard <peter@korsgaard.com>
10 10
11 Description 11 Description
12 ----------- 12 -----------
13 13
14 i2c-ocores is an i2c bus driver for the OpenCo 14 i2c-ocores is an i2c bus driver for the OpenCores.org I2C controller
15 IP core by Richard Herveille. 15 IP core by Richard Herveille.
16 16
17 Usage 17 Usage
18 ----- 18 -----
19 19
20 i2c-ocores uses the platform bus, so you need 20 i2c-ocores uses the platform bus, so you need to provide a struct
21 platform_device with the base address and inte 21 platform_device with the base address and interrupt number. The
22 dev.platform_data of the device should also po 22 dev.platform_data of the device should also point to a struct
23 ocores_i2c_platform_data (see linux/platform_d 23 ocores_i2c_platform_data (see linux/platform_data/i2c-ocores.h) describing the
24 distance between registers and the input clock 24 distance between registers and the input clock speed.
25 There is also a possibility to attach a list o 25 There is also a possibility to attach a list of i2c_board_info which
26 the i2c-ocores driver will add to the bus upon 26 the i2c-ocores driver will add to the bus upon creation.
27 27
28 E.G. something like:: 28 E.G. something like::
29 29
30 static struct resource ocores_resources[] = 30 static struct resource ocores_resources[] = {
31 [0] = { 31 [0] = {
32 .start = MYI2C_BASEADDR, 32 .start = MYI2C_BASEADDR,
33 .end = MYI2C_BASEADDR + 8, 33 .end = MYI2C_BASEADDR + 8,
34 .flags = IORESOURCE_MEM, 34 .flags = IORESOURCE_MEM,
35 }, 35 },
36 [1] = { 36 [1] = {
37 .start = MYI2C_IRQ, 37 .start = MYI2C_IRQ,
38 .end = MYI2C_IRQ, 38 .end = MYI2C_IRQ,
39 .flags = IORESOURCE_IRQ, 39 .flags = IORESOURCE_IRQ,
40 }, 40 },
41 }; 41 };
42 42
43 /* optional board info */ 43 /* optional board info */
44 struct i2c_board_info ocores_i2c_board_info[ 44 struct i2c_board_info ocores_i2c_board_info[] = {
45 { 45 {
46 I2C_BOARD_INFO("tsc2003", 0x48 46 I2C_BOARD_INFO("tsc2003", 0x48),
47 .platform_data = &tsc2003_plat 47 .platform_data = &tsc2003_platform_data,
48 .irq = TSC_IRQ 48 .irq = TSC_IRQ
49 }, 49 },
50 { 50 {
51 I2C_BOARD_INFO("adv7180", 0x42 51 I2C_BOARD_INFO("adv7180", 0x42 >> 1),
52 .irq = ADV_IRQ 52 .irq = ADV_IRQ
53 } 53 }
54 }; 54 };
55 55
56 static struct ocores_i2c_platform_data myi2c 56 static struct ocores_i2c_platform_data myi2c_data = {
57 .regstep = 2, /* two 57 .regstep = 2, /* two bytes between registers */
58 .clock_khz = 50000, /* inp 58 .clock_khz = 50000, /* input clock of 50MHz */
59 .devices = ocores_i2c_board_inf 59 .devices = ocores_i2c_board_info, /* optional table of devices */
60 .num_devices = ARRAY_SIZE(ocores_i2 60 .num_devices = ARRAY_SIZE(ocores_i2c_board_info), /* table size */
61 }; 61 };
62 62
63 static struct platform_device myi2c = { 63 static struct platform_device myi2c = {
64 .name = "ocores-i2c" 64 .name = "ocores-i2c",
65 .dev = { 65 .dev = {
66 .platform_data = &myi2c_data, 66 .platform_data = &myi2c_data,
67 }, 67 },
68 .num_resources = ARRAY_SIZE(o 68 .num_resources = ARRAY_SIZE(ocores_resources),
69 .resource = ocores_resou 69 .resource = ocores_resources,
70 }; 70 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.