1 .. include:: <isonum.txt> 1 .. include:: <isonum.txt>
2 2
3 .. _joystick-doc: 3 .. _joystick-doc:
4 4
5 Introduction 5 Introduction
6 ============ 6 ============
7 7
8 The joystick driver for Linux provides support 8 The joystick driver for Linux provides support for a variety of joysticks
9 and similar devices. It is based on a larger p 9 and similar devices. It is based on a larger project aiming to support all
10 input devices in Linux. 10 input devices in Linux.
11 11
12 The mailing list for the project is: 12 The mailing list for the project is:
13 13
14 linux-input@vger.kernel.org 14 linux-input@vger.kernel.org
15 15
16 send "subscribe linux-input" to majordomo@vger 16 send "subscribe linux-input" to majordomo@vger.kernel.org to subscribe to it.
17 17
18 Usage 18 Usage
19 ===== 19 =====
20 20
21 For basic usage you just choose the right opti 21 For basic usage you just choose the right options in kernel config and
22 you should be set. 22 you should be set.
23 23
24 Utilities 24 Utilities
25 --------- 25 ---------
26 26
27 For testing and other purposes (for example se 27 For testing and other purposes (for example serial devices), there is a set
28 of utilities, such as ``jstest``, ``jscal``, a 28 of utilities, such as ``jstest``, ``jscal``, and ``evtest``,
29 usually packaged as ``joystick``, ``input-util 29 usually packaged as ``joystick``, ``input-utils``, ``evtest``, and so on.
30 30
31 ``inputattach`` utility is required if your jo 31 ``inputattach`` utility is required if your joystick is connected to a
32 serial port. 32 serial port.
33 33
34 Device nodes 34 Device nodes
35 ------------ 35 ------------
36 36
37 For applications to be able to use the joystic 37 For applications to be able to use the joysticks, device nodes should be
38 created in /dev. Normally it is done automatic 38 created in /dev. Normally it is done automatically by the system, but
39 it can also be done by hand:: 39 it can also be done by hand::
40 40
41 cd /dev 41 cd /dev
42 rm js* 42 rm js*
43 mkdir input 43 mkdir input
44 mknod input/js0 c 13 0 44 mknod input/js0 c 13 0
45 mknod input/js1 c 13 1 45 mknod input/js1 c 13 1
46 mknod input/js2 c 13 2 46 mknod input/js2 c 13 2
47 mknod input/js3 c 13 3 47 mknod input/js3 c 13 3
48 ln -s input/js0 js0 48 ln -s input/js0 js0
49 ln -s input/js1 js1 49 ln -s input/js1 js1
50 ln -s input/js2 js2 50 ln -s input/js2 js2
51 ln -s input/js3 js3 51 ln -s input/js3 js3
52 52
53 For testing with inpututils it's also convenie 53 For testing with inpututils it's also convenient to create these::
54 54
55 mknod input/event0 c 13 64 55 mknod input/event0 c 13 64
56 mknod input/event1 c 13 65 56 mknod input/event1 c 13 65
57 mknod input/event2 c 13 66 57 mknod input/event2 c 13 66
58 mknod input/event3 c 13 67 58 mknod input/event3 c 13 67
59 59
60 Modules needed 60 Modules needed
61 -------------- 61 --------------
62 62
63 For all joystick drivers to function, you'll n 63 For all joystick drivers to function, you'll need the userland interface
64 module in kernel, either loaded or compiled in 64 module in kernel, either loaded or compiled in::
65 65
66 modprobe joydev 66 modprobe joydev
67 67
68 For gameport joysticks, you'll have to load th 68 For gameport joysticks, you'll have to load the gameport driver as well::
69 69
70 modprobe ns558 70 modprobe ns558
71 71
72 And for serial port joysticks, you'll need the 72 And for serial port joysticks, you'll need the serial input line
73 discipline module loaded and the inputattach u 73 discipline module loaded and the inputattach utility started::
74 74
75 modprobe serport 75 modprobe serport
76 inputattach -xxx /dev/tts/X & 76 inputattach -xxx /dev/tts/X &
77 77
78 In addition to that, you'll need the joystick 78 In addition to that, you'll need the joystick driver module itself, most
79 usually you'll have an analog joystick:: 79 usually you'll have an analog joystick::
80 80
81 modprobe analog 81 modprobe analog
82 82
83 For automatic module loading, something like t 83 For automatic module loading, something like this might work - tailor to
84 your needs:: 84 your needs::
85 85
86 alias tty-ldisc-2 serport 86 alias tty-ldisc-2 serport
87 alias char-major-13 input 87 alias char-major-13 input
88 above input joydev ns558 analog 88 above input joydev ns558 analog
89 options analog map=gamepad,none,2btn 89 options analog map=gamepad,none,2btn
90 90
91 Verifying that it works 91 Verifying that it works
92 ----------------------- 92 -----------------------
93 93
94 For testing the joystick driver functionality, 94 For testing the joystick driver functionality, there is the jstest
95 program in the utilities package. You run it b 95 program in the utilities package. You run it by typing::
96 96
97 jstest /dev/input/js0 97 jstest /dev/input/js0
98 98
99 And it should show a line with the joystick va 99 And it should show a line with the joystick values, which update as you
100 move the stick, and press its buttons. The axe 100 move the stick, and press its buttons. The axes should all be zero when the
101 joystick is in the center position. They shoul 101 joystick is in the center position. They should not jitter by themselves to
102 other close values, and they also should be st 102 other close values, and they also should be steady in any other position of
103 the stick. They should have the full range fro 103 the stick. They should have the full range from -32767 to 32767. If all this
104 is met, then it's all fine, and you can play t 104 is met, then it's all fine, and you can play the games. :)
105 105
106 If it's not, then there might be a problem. Tr 106 If it's not, then there might be a problem. Try to calibrate the joystick,
107 and if it still doesn't work, read the drivers 107 and if it still doesn't work, read the drivers section of this file, the
108 troubleshooting section, and the FAQ. 108 troubleshooting section, and the FAQ.
109 109
110 Calibration 110 Calibration
111 ----------- 111 -----------
112 112
113 For most joysticks you won't need any manual c 113 For most joysticks you won't need any manual calibration, since the
114 joystick should be autocalibrated by the drive 114 joystick should be autocalibrated by the driver automagically. However, with
115 some analog joysticks, that either do not use 115 some analog joysticks, that either do not use linear resistors, or if you
116 want better precision, you can use the jscal p 116 want better precision, you can use the jscal program::
117 117
118 jscal -c /dev/input/js0 118 jscal -c /dev/input/js0
119 119
120 included in the joystick package to set better 120 included in the joystick package to set better correction coefficients than
121 what the driver would choose itself. 121 what the driver would choose itself.
122 122
123 After calibrating the joystick you can verify 123 After calibrating the joystick you can verify if you like the new
124 calibration using the jstest command, and if y 124 calibration using the jstest command, and if you do, you then can save the
125 correction coefficients into a file:: 125 correction coefficients into a file::
126 126
127 jscal -p /dev/input/js0 > /etc/joystic 127 jscal -p /dev/input/js0 > /etc/joystick.cal
128 128
129 And add a line to your rc script executing tha 129 And add a line to your rc script executing that file::
130 130
131 source /etc/joystick.cal 131 source /etc/joystick.cal
132 132
133 This way, after the next reboot your joystick 133 This way, after the next reboot your joystick will remain calibrated. You
134 can also add the ``jscal -p`` line to your shu 134 can also add the ``jscal -p`` line to your shutdown script.
135 135
136 Hardware-specific driver information !! 136 HW specific driver information
137 ==================================== !! 137 ==============================
138 138
139 In this section each of the separate hardware 139 In this section each of the separate hardware specific drivers is described.
140 140
141 Analog joysticks 141 Analog joysticks
142 ---------------- 142 ----------------
143 143
144 The analog.c driver uses the standard analog i !! 144 The analog.c uses the standard analog inputs of the gameport, and thus
145 supports all standard joysticks and gamepads. 145 supports all standard joysticks and gamepads. It uses a very advanced
146 routine for this, allowing for data precision 146 routine for this, allowing for data precision that can't be found on any
147 other system. 147 other system.
148 148
149 It also supports extensions like additional ha 149 It also supports extensions like additional hats and buttons compatible
150 with CH Flightstick Pro, ThrustMaster FCS or 6 150 with CH Flightstick Pro, ThrustMaster FCS or 6 and 8 button gamepads. Saitek
151 Cyborg 'digital' joysticks are also supported 151 Cyborg 'digital' joysticks are also supported by this driver, because
152 they're basically souped up CHF sticks. 152 they're basically souped up CHF sticks.
153 153
154 However the only types that can be autodetecte 154 However the only types that can be autodetected are:
155 155
156 * 2-axis, 4-button joystick 156 * 2-axis, 4-button joystick
157 * 3-axis, 4-button joystick 157 * 3-axis, 4-button joystick
158 * 4-axis, 4-button joystick 158 * 4-axis, 4-button joystick
159 * Saitek Cyborg 'digital' joysticks 159 * Saitek Cyborg 'digital' joysticks
160 160
161 For other joystick types (more/less axes, hats 161 For other joystick types (more/less axes, hats, and buttons) support
162 you'll need to specify the types either on the 162 you'll need to specify the types either on the kernel command line or on the
163 module command line, when inserting analog int 163 module command line, when inserting analog into the kernel. The
164 parameters are:: 164 parameters are::
165 165
166 analog.map=<type1>,<type2>,<type3>,... 166 analog.map=<type1>,<type2>,<type3>,....
167 167
168 'type' is type of the joystick from the table 168 'type' is type of the joystick from the table below, defining joysticks
169 present on gameports in the system, starting w 169 present on gameports in the system, starting with gameport0, second 'type'
170 entry defining joystick on gameport1 and so on 170 entry defining joystick on gameport1 and so on.
171 171
172 ========= ============================ 172 ========= =====================================================
173 Type Meaning 173 Type Meaning
174 ========= ============================ 174 ========= =====================================================
175 none No analog joystick on that p 175 none No analog joystick on that port
176 auto Autodetect joystick 176 auto Autodetect joystick
177 2btn 2-button n-axis joystick 177 2btn 2-button n-axis joystick
178 y-joy Two 2-button 2-axis joystick 178 y-joy Two 2-button 2-axis joysticks on an Y-cable
179 y-pad Two 2-button 2-axis gamepads 179 y-pad Two 2-button 2-axis gamepads on an Y-cable
180 fcs Thrustmaster FCS compatible 180 fcs Thrustmaster FCS compatible joystick
181 chf Joystick with a CH Flightsti 181 chf Joystick with a CH Flightstick compatible hat
182 fullchf CH Flightstick compatible wi 182 fullchf CH Flightstick compatible with two hats and 6 buttons
183 gamepad 4/6-button n-axis gamepad 183 gamepad 4/6-button n-axis gamepad
184 gamepad8 8-button 2-axis gamepad 184 gamepad8 8-button 2-axis gamepad
185 ========= ============================ 185 ========= =====================================================
186 186
187 In case your joystick doesn't fit in any of th 187 In case your joystick doesn't fit in any of the above categories, you can
188 specify the type as a number by combining the 188 specify the type as a number by combining the bits in the table below. This
189 is not recommended unless you really know what 189 is not recommended unless you really know what are you doing. It's not
190 dangerous, but not simple either. 190 dangerous, but not simple either.
191 191
192 ==== ========================= 192 ==== =========================
193 Bit Meaning 193 Bit Meaning
194 ==== ========================= 194 ==== =========================
195 0 Axis X1 195 0 Axis X1
196 1 Axis Y1 196 1 Axis Y1
197 2 Axis X2 197 2 Axis X2
198 3 Axis Y2 198 3 Axis Y2
199 4 Button A 199 4 Button A
200 5 Button B 200 5 Button B
201 6 Button C 201 6 Button C
202 7 Button D 202 7 Button D
203 8 CHF Buttons X and Y 203 8 CHF Buttons X and Y
204 9 CHF Hat 1 204 9 CHF Hat 1
205 10 CHF Hat 2 205 10 CHF Hat 2
206 11 FCS Hat 206 11 FCS Hat
207 12 Pad Button X 207 12 Pad Button X
208 13 Pad Button Y 208 13 Pad Button Y
209 14 Pad Button U 209 14 Pad Button U
210 15 Pad Button V 210 15 Pad Button V
211 16 Saitek F1-F4 Buttons 211 16 Saitek F1-F4 Buttons
212 17 Saitek Digital Mode 212 17 Saitek Digital Mode
213 19 GamePad 213 19 GamePad
214 20 Joy2 Axis X1 214 20 Joy2 Axis X1
215 21 Joy2 Axis Y1 215 21 Joy2 Axis Y1
216 22 Joy2 Axis X2 216 22 Joy2 Axis X2
217 23 Joy2 Axis Y2 217 23 Joy2 Axis Y2
218 24 Joy2 Button A 218 24 Joy2 Button A
219 25 Joy2 Button B 219 25 Joy2 Button B
220 26 Joy2 Button C 220 26 Joy2 Button C
221 27 Joy2 Button D 221 27 Joy2 Button D
222 31 Joy2 GamePad 222 31 Joy2 GamePad
223 ==== ========================= 223 ==== =========================
224 224
225 Microsoft SideWinder joysticks 225 Microsoft SideWinder joysticks
226 ------------------------------ 226 ------------------------------
227 227
228 Microsoft 'Digital Overdrive' protocol is supp 228 Microsoft 'Digital Overdrive' protocol is supported by the sidewinder.c
229 module. All currently supported joysticks: 229 module. All currently supported joysticks:
230 230
231 * Microsoft SideWinder 3D Pro 231 * Microsoft SideWinder 3D Pro
232 * Microsoft SideWinder Force Feedback Pro 232 * Microsoft SideWinder Force Feedback Pro
233 * Microsoft SideWinder Force Feedback Wheel 233 * Microsoft SideWinder Force Feedback Wheel
234 * Microsoft SideWinder FreeStyle Pro 234 * Microsoft SideWinder FreeStyle Pro
235 * Microsoft SideWinder GamePad (up to four, ch 235 * Microsoft SideWinder GamePad (up to four, chained)
236 * Microsoft SideWinder Precision Pro 236 * Microsoft SideWinder Precision Pro
237 * Microsoft SideWinder Precision Pro USB 237 * Microsoft SideWinder Precision Pro USB
238 238
239 are autodetected, and thus no module parameter 239 are autodetected, and thus no module parameters are needed.
240 240
241 There is one caveat with the 3D Pro. There are 241 There is one caveat with the 3D Pro. There are 9 buttons reported,
242 although the joystick has only 8. The 9th butt 242 although the joystick has only 8. The 9th button is the mode switch on the
243 rear side of the joystick. However, moving it, 243 rear side of the joystick. However, moving it, you'll reset the joystick,
244 and make it unresponsive for about a one third 244 and make it unresponsive for about a one third of a second. Furthermore, the
245 joystick will also re-center itself, taking th 245 joystick will also re-center itself, taking the position it was in during
246 this time as a new center position. Use it if 246 this time as a new center position. Use it if you want, but think first.
247 247
248 The SideWinder Standard is not a digital joyst 248 The SideWinder Standard is not a digital joystick, and thus is supported
249 by the analog driver described above. 249 by the analog driver described above.
250 250
251 Logitech ADI devices 251 Logitech ADI devices
252 -------------------- 252 --------------------
253 253
254 Logitech ADI protocol is supported by the adi. 254 Logitech ADI protocol is supported by the adi.c module. It should support
255 any Logitech device using this protocol. This 255 any Logitech device using this protocol. This includes, but is not limited
256 to: 256 to:
257 257
258 * Logitech CyberMan 2 258 * Logitech CyberMan 2
259 * Logitech ThunderPad Digital 259 * Logitech ThunderPad Digital
260 * Logitech WingMan Extreme Digital 260 * Logitech WingMan Extreme Digital
261 * Logitech WingMan Formula 261 * Logitech WingMan Formula
262 * Logitech WingMan Interceptor 262 * Logitech WingMan Interceptor
263 * Logitech WingMan GamePad 263 * Logitech WingMan GamePad
264 * Logitech WingMan GamePad USB 264 * Logitech WingMan GamePad USB
265 * Logitech WingMan GamePad Extreme 265 * Logitech WingMan GamePad Extreme
266 * Logitech WingMan Extreme Digital 3D 266 * Logitech WingMan Extreme Digital 3D
267 267
268 ADI devices are autodetected, and the driver s 268 ADI devices are autodetected, and the driver supports up to two (any
269 combination of) devices on a single gameport, !! 269 combination of) devices on a single gameport, using an Y-cable or chained
270 together. 270 together.
271 271
272 Logitech WingMan Joystick, Logitech WingMan At 272 Logitech WingMan Joystick, Logitech WingMan Attack, Logitech WingMan
273 Extreme and Logitech WingMan ThunderPad are no 273 Extreme and Logitech WingMan ThunderPad are not digital joysticks and are
274 handled by the analog driver described above. 274 handled by the analog driver described above. Logitech WingMan Warrior and
275 Logitech Magellan are supported by serial driv 275 Logitech Magellan are supported by serial drivers described below. Logitech
276 WingMan Force and Logitech WingMan Formula For 276 WingMan Force and Logitech WingMan Formula Force are supported by the
277 I-Force driver described below. Logitech Cyber 277 I-Force driver described below. Logitech CyberMan is not supported yet.
278 278
279 Gravis GrIP 279 Gravis GrIP
280 ----------- 280 -----------
281 281
282 Gravis GrIP protocol is supported by the grip. 282 Gravis GrIP protocol is supported by the grip.c module. It currently
283 supports: 283 supports:
284 284
285 * Gravis GamePad Pro 285 * Gravis GamePad Pro
286 * Gravis BlackHawk Digital 286 * Gravis BlackHawk Digital
287 * Gravis Xterminator 287 * Gravis Xterminator
288 * Gravis Xterminator DualControl 288 * Gravis Xterminator DualControl
289 289
290 All these devices are autodetected, and you ca 290 All these devices are autodetected, and you can even use any combination
291 of up to two of these pads either chained toge !! 291 of up to two of these pads either chained together or using an Y-cable on a
292 single gameport. 292 single gameport.
293 293
294 GrIP MultiPort isn't supported yet. Gravis Sti 294 GrIP MultiPort isn't supported yet. Gravis Stinger is a serial device and is
295 supported by the stinger driver. Other Gravis 295 supported by the stinger driver. Other Gravis joysticks are supported by the
296 analog driver. 296 analog driver.
297 297
298 FPGaming A3D and MadCatz A3D 298 FPGaming A3D and MadCatz A3D
299 ---------------------------- 299 ----------------------------
300 300
301 The Assassin 3D protocol created by FPGaming, 301 The Assassin 3D protocol created by FPGaming, is used both by FPGaming
302 themselves and is licensed to MadCatz. A3D dev 302 themselves and is licensed to MadCatz. A3D devices are supported by the
303 a3d.c module. It currently supports: 303 a3d.c module. It currently supports:
304 304
305 * FPGaming Assassin 3D 305 * FPGaming Assassin 3D
306 * MadCatz Panther 306 * MadCatz Panther
307 * MadCatz Panther XL 307 * MadCatz Panther XL
308 308
309 All these devices are autodetected. Because th 309 All these devices are autodetected. Because the Assassin 3D and the Panther
310 allow connecting analog joysticks to them, you 310 allow connecting analog joysticks to them, you'll need to load the analog
311 driver as well to handle the attached joystick 311 driver as well to handle the attached joysticks.
312 312
313 The trackball should work with USB mousedev mo 313 The trackball should work with USB mousedev module as a normal mouse. See
314 the USB documentation for how to setup a USB m !! 314 the USB documentation for how to setup an USB mouse.
315 315
316 ThrustMaster DirectConnect (BSP) 316 ThrustMaster DirectConnect (BSP)
317 -------------------------------- 317 --------------------------------
318 318
319 The TM DirectConnect (BSP) protocol is support 319 The TM DirectConnect (BSP) protocol is supported by the tmdc.c
320 module. This includes, but is not limited to: 320 module. This includes, but is not limited to:
321 321
322 * ThrustMaster Millennium 3D Interceptor 322 * ThrustMaster Millennium 3D Interceptor
323 * ThrustMaster 3D Rage Pad 323 * ThrustMaster 3D Rage Pad
324 * ThrustMaster Fusion Digital Game Pad 324 * ThrustMaster Fusion Digital Game Pad
325 325
326 Devices not directly supported, but hopefully 326 Devices not directly supported, but hopefully working are:
327 327
328 * ThrustMaster FragMaster 328 * ThrustMaster FragMaster
329 * ThrustMaster Attack Throttle 329 * ThrustMaster Attack Throttle
330 330
331 If you have one of these, contact me. 331 If you have one of these, contact me.
332 332
333 TMDC devices are autodetected, and thus no par 333 TMDC devices are autodetected, and thus no parameters to the module
334 are needed. Up to two TMDC devices can be conn 334 are needed. Up to two TMDC devices can be connected to one gameport, using
335 a Y-cable. !! 335 an Y-cable.
336 336
337 Creative Labs Blaster 337 Creative Labs Blaster
338 --------------------- 338 ---------------------
339 339
340 The Blaster protocol is supported by the cobra 340 The Blaster protocol is supported by the cobra.c module. It supports only
341 the: 341 the:
342 342
343 * Creative Blaster GamePad Cobra 343 * Creative Blaster GamePad Cobra
344 344
345 Up to two of these can be used on a single gam !! 345 Up to two of these can be used on a single gameport, using an Y-cable.
346 346
347 Genius Digital joysticks 347 Genius Digital joysticks
348 ------------------------ 348 ------------------------
349 349
350 The Genius digitally communicating joysticks a 350 The Genius digitally communicating joysticks are supported by the gf2k.c
351 module. This includes: 351 module. This includes:
352 352
353 * Genius Flight2000 F-23 joystick 353 * Genius Flight2000 F-23 joystick
354 * Genius Flight2000 F-31 joystick 354 * Genius Flight2000 F-31 joystick
355 * Genius G-09D gamepad 355 * Genius G-09D gamepad
356 356
357 Other Genius digital joysticks are not support 357 Other Genius digital joysticks are not supported yet, but support can be
358 added fairly easily. 358 added fairly easily.
359 359
360 InterAct Digital joysticks 360 InterAct Digital joysticks
361 -------------------------- 361 --------------------------
362 362
363 The InterAct digitally communicating joysticks 363 The InterAct digitally communicating joysticks are supported by the
364 interact.c module. This includes: 364 interact.c module. This includes:
365 365
366 * InterAct HammerHead/FX gamepad 366 * InterAct HammerHead/FX gamepad
367 * InterAct ProPad8 gamepad 367 * InterAct ProPad8 gamepad
368 368
369 Other InterAct digital joysticks are not suppo 369 Other InterAct digital joysticks are not supported yet, but support can be
370 added fairly easily. 370 added fairly easily.
371 371
372 PDPI Lightning 4 gamecards 372 PDPI Lightning 4 gamecards
373 -------------------------- 373 --------------------------
374 374
375 PDPI Lightning 4 gamecards are supported by th 375 PDPI Lightning 4 gamecards are supported by the lightning.c module.
376 Once the module is loaded, the analog driver c 376 Once the module is loaded, the analog driver can be used to handle the
377 joysticks. Digitally communicating joystick wi 377 joysticks. Digitally communicating joystick will work only on port 0, while
378 using Y-cables, you can connect up to 8 analog 378 using Y-cables, you can connect up to 8 analog joysticks to a single L4
379 card, 16 in case you have two in your system. 379 card, 16 in case you have two in your system.
380 380
381 Trident 4DWave / Aureal Vortex 381 Trident 4DWave / Aureal Vortex
382 ------------------------------ 382 ------------------------------
383 383
384 Soundcards with a Trident 4DWave DX/NX or Aure !! 384 Soundcards with a Trident 4DWave DX/NX or Aureal Vortex/Vortex2 chipsets
385 provide an "Enhanced Game Port" mode where the 385 provide an "Enhanced Game Port" mode where the soundcard handles polling the
386 joystick. This mode is supported by the pciga 386 joystick. This mode is supported by the pcigame.c module. Once loaded the
387 analog driver can use the enhanced features of 387 analog driver can use the enhanced features of these gameports..
388 388
389 Crystal SoundFusion 389 Crystal SoundFusion
390 ------------------- 390 -------------------
391 391
392 Soundcards with Crystal SoundFusion chipsets p 392 Soundcards with Crystal SoundFusion chipsets provide an "Enhanced Game
393 Port", much like the 4DWave or Vortex above. T 393 Port", much like the 4DWave or Vortex above. This, and also the normal mode
394 for the port of the SoundFusion is supported b 394 for the port of the SoundFusion is supported by the cs461x.c module.
395 395
396 SoundBlaster Live! 396 SoundBlaster Live!
397 ------------------ 397 ------------------
398 398
399 The Live! has a special PCI gameport, which, a 399 The Live! has a special PCI gameport, which, although it doesn't provide
400 any "Enhanced" stuff like 4DWave and friends, 400 any "Enhanced" stuff like 4DWave and friends, is quite a bit faster than
401 its ISA counterparts. It also requires special 401 its ISA counterparts. It also requires special support, hence the
402 emu10k1-gp.c module for it instead of the norm 402 emu10k1-gp.c module for it instead of the normal ns558.c one.
403 403
404 SoundBlaster 64 and 128 - ES1370 and ES1371, E 404 SoundBlaster 64 and 128 - ES1370 and ES1371, ESS Solo1 and S3 SonicVibes
405 ---------------------------------------------- 405 ------------------------------------------------------------------------
406 406
407 These PCI soundcards have specific gameports. 407 These PCI soundcards have specific gameports. They are handled by the
408 sound drivers themselves. Make sure you select 408 sound drivers themselves. Make sure you select gameport support in the
409 joystick menu and sound card support in the so 409 joystick menu and sound card support in the sound menu for your appropriate
410 card. 410 card.
411 411
412 Amiga 412 Amiga
413 ----- 413 -----
414 414
415 Amiga joysticks, connected to an Amiga, are su 415 Amiga joysticks, connected to an Amiga, are supported by the amijoy.c
416 driver. Since they can't be autodetected, the 416 driver. Since they can't be autodetected, the driver has a command line:
417 417
418 amijoy.map=<a>,<b> 418 amijoy.map=<a>,<b>
419 419
420 a and b define the joysticks connected to the 420 a and b define the joysticks connected to the JOY0DAT and JOY1DAT ports of
421 the Amiga. 421 the Amiga.
422 422
423 ====== =========================== 423 ====== ===========================
424 Value Joystick type 424 Value Joystick type
425 ====== =========================== 425 ====== ===========================
426 0 None 426 0 None
427 1 1-button digital joystick 427 1 1-button digital joystick
428 ====== =========================== 428 ====== ===========================
429 429
430 No more joystick types are supported now, but 430 No more joystick types are supported now, but that should change in the
431 future if I get an Amiga in the reach of my fi 431 future if I get an Amiga in the reach of my fingers.
432 432
433 Game console and 8-bit pads and joysticks 433 Game console and 8-bit pads and joysticks
434 ----------------------------------------- 434 -----------------------------------------
435 435
436 These pads and joysticks are not designed for 436 These pads and joysticks are not designed for PCs and other computers
437 Linux runs on, and usually require a special c 437 Linux runs on, and usually require a special connector for attaching
438 them through a parallel port. 438 them through a parallel port.
439 439
440 See :ref:`joystick-parport` for more info. 440 See :ref:`joystick-parport` for more info.
441 441
442 SpaceTec/LabTec devices 442 SpaceTec/LabTec devices
443 ----------------------- 443 -----------------------
444 444
445 SpaceTec serial devices communicate using the 445 SpaceTec serial devices communicate using the SpaceWare protocol. It is
446 supported by the spaceorb.c and spaceball.c dr 446 supported by the spaceorb.c and spaceball.c drivers. The devices currently
447 supported by spaceorb.c are: 447 supported by spaceorb.c are:
448 448
449 * SpaceTec SpaceBall Avenger 449 * SpaceTec SpaceBall Avenger
450 * SpaceTec SpaceOrb 360 450 * SpaceTec SpaceOrb 360
451 451
452 Devices currently supported by spaceball.c are 452 Devices currently supported by spaceball.c are:
453 453
454 * SpaceTec SpaceBall 4000 FLX 454 * SpaceTec SpaceBall 4000 FLX
455 455
456 In addition to having the spaceorb/spaceball a 456 In addition to having the spaceorb/spaceball and serport modules in the
457 kernel, you also need to attach a serial port !! 457 kernel, you also need to attach a serial port to it. to do that, run the
458 inputattach program:: 458 inputattach program::
459 459
460 inputattach --spaceorb /dev/tts/x & 460 inputattach --spaceorb /dev/tts/x &
461 461
462 or:: 462 or::
463 463
464 inputattach --spaceball /dev/tts/x & 464 inputattach --spaceball /dev/tts/x &
465 465
466 where /dev/tts/x is the serial port which the 466 where /dev/tts/x is the serial port which the device is connected to. After
467 doing this, the device will be reported and wi 467 doing this, the device will be reported and will start working.
468 468
469 There is one caveat with the SpaceOrb. The but !! 469 There is one caveat with the SpaceOrb. The button #6, the on the bottom
470 side of the orb, although reported as an ordin 470 side of the orb, although reported as an ordinary button, causes internal
471 recentering of the spaceorb, moving the zero p 471 recentering of the spaceorb, moving the zero point to the position in which
472 the ball is at the moment of pressing the butt 472 the ball is at the moment of pressing the button. So, think first before
473 you bind it to some other function. 473 you bind it to some other function.
474 474
475 SpaceTec SpaceBall 2003 FLX and 3003 FLX are n 475 SpaceTec SpaceBall 2003 FLX and 3003 FLX are not supported yet.
476 476
477 Logitech SWIFT devices 477 Logitech SWIFT devices
478 ---------------------- 478 ----------------------
479 479
480 The SWIFT serial protocol is supported by the 480 The SWIFT serial protocol is supported by the warrior.c module. It
481 currently supports only the: 481 currently supports only the:
482 482
483 * Logitech WingMan Warrior 483 * Logitech WingMan Warrior
484 484
485 but in the future, Logitech CyberMan (the orig 485 but in the future, Logitech CyberMan (the original one, not CM2) could be
486 supported as well. To use the module, you need 486 supported as well. To use the module, you need to run inputattach after you
487 insert/compile the module into your kernel:: 487 insert/compile the module into your kernel::
488 488
489 inputattach --warrior /dev/tts/x & 489 inputattach --warrior /dev/tts/x &
490 490
491 /dev/tts/x is the serial port your Warrior is 491 /dev/tts/x is the serial port your Warrior is attached to.
492 492
493 Magellan / Space Mouse 493 Magellan / Space Mouse
494 ---------------------- 494 ----------------------
495 495
496 The Magellan (or Space Mouse), manufactured by 496 The Magellan (or Space Mouse), manufactured by LogiCad3d (formerly Space
497 Systems), for many other companies (Logitech, 497 Systems), for many other companies (Logitech, HP, ...) is supported by the
498 joy-magellan module. It currently supports onl 498 joy-magellan module. It currently supports only the:
499 499
500 * Magellan 3D 500 * Magellan 3D
501 * Space Mouse 501 * Space Mouse
502 502
503 models; the additional buttons on the 'Plus' v !! 503 models, the additional buttons on the 'Plus' versions are not supported yet.
504 504
505 To use it, you need to attach the serial port 505 To use it, you need to attach the serial port to the driver using the::
506 506
507 inputattach --magellan /dev/tts/x & 507 inputattach --magellan /dev/tts/x &
508 508
509 command. After that the Magellan will be detec 509 command. After that the Magellan will be detected, initialized, will beep,
510 and the /dev/input/jsX device should become us 510 and the /dev/input/jsX device should become usable.
511 511
512 I-Force devices 512 I-Force devices
513 --------------- 513 ---------------
514 514
515 All I-Force devices are supported by the iforc 515 All I-Force devices are supported by the iforce module. This includes:
516 516
517 * AVB Mag Turbo Force 517 * AVB Mag Turbo Force
518 * AVB Top Shot Pegasus 518 * AVB Top Shot Pegasus
519 * AVB Top Shot Force Feedback Racing Wheel 519 * AVB Top Shot Force Feedback Racing Wheel
520 * Boeder Force Feedback Wheel <<
521 * Logitech WingMan Force 520 * Logitech WingMan Force
522 * Logitech WingMan Force Wheel 521 * Logitech WingMan Force Wheel
523 * Guillemot Race Leader Force Feedback 522 * Guillemot Race Leader Force Feedback
524 * Guillemot Force Feedback Racing Wheel 523 * Guillemot Force Feedback Racing Wheel
525 * Thrustmaster Motor Sport GT 524 * Thrustmaster Motor Sport GT
526 525
527 To use it, you need to attach the serial port 526 To use it, you need to attach the serial port to the driver using the::
528 527
529 inputattach --iforce /dev/tts/x & 528 inputattach --iforce /dev/tts/x &
530 529
531 command. After that the I-Force device will be 530 command. After that the I-Force device will be detected, and the
532 /dev/input/jsX device should become usable. 531 /dev/input/jsX device should become usable.
533 532
534 In case you're using the device via the USB po 533 In case you're using the device via the USB port, the inputattach command
535 isn't needed. 534 isn't needed.
536 535
537 The I-Force driver now supports force feedback 536 The I-Force driver now supports force feedback via the event interface.
538 537
539 Please note that Logitech WingMan 3D devices a 538 Please note that Logitech WingMan 3D devices are _not_ supported by this
540 module, rather by hid. Force feedback is not s 539 module, rather by hid. Force feedback is not supported for those devices.
541 Logitech gamepads are also hid devices. 540 Logitech gamepads are also hid devices.
542 541
543 Gravis Stinger gamepad 542 Gravis Stinger gamepad
544 ---------------------- 543 ----------------------
545 544
546 The Gravis Stinger serial port gamepad, design 545 The Gravis Stinger serial port gamepad, designed for use with laptop
547 computers, is supported by the stinger.c modul 546 computers, is supported by the stinger.c module. To use it, attach the
548 serial port to the driver using:: 547 serial port to the driver using::
549 548
550 inputattach --stinger /dev/tty/x & 549 inputattach --stinger /dev/tty/x &
551 550
552 where x is the number of the serial port. 551 where x is the number of the serial port.
553 552
554 Troubleshooting 553 Troubleshooting
555 =============== 554 ===============
556 555
557 There is quite a high probability that you run 556 There is quite a high probability that you run into some problems. For
558 testing whether the driver works, if in doubt, 557 testing whether the driver works, if in doubt, use the jstest utility in
559 some of its modes. The most useful modes are " 558 some of its modes. The most useful modes are "normal" - for the 1.x
560 interface, and "old" for the "0.x" interface. 559 interface, and "old" for the "0.x" interface. You run it by typing::
561 560
562 jstest --normal /dev/input/js0 561 jstest --normal /dev/input/js0
563 jstest --old /dev/input/js0 562 jstest --old /dev/input/js0
564 563
565 Additionally you can do a test with the evtest 564 Additionally you can do a test with the evtest utility::
566 565
567 evtest /dev/input/event0 566 evtest /dev/input/event0
568 567
569 Oh, and read the FAQ! :) 568 Oh, and read the FAQ! :)
570 569
571 FAQ 570 FAQ
572 === 571 ===
573 572
574 :Q: Running 'jstest /dev/input/js0' results in 573 :Q: Running 'jstest /dev/input/js0' results in "File not found" error. What's the
575 cause? 574 cause?
576 :A: The device files don't exist. Create them 575 :A: The device files don't exist. Create them (see section 2.2).
577 576
578 :Q: Is it possible to connect my old Atari/Com 577 :Q: Is it possible to connect my old Atari/Commodore/Amiga/console joystick
579 or pad that uses a 9-pin D-type Cannon con !! 578 or pad that uses a 9-pin D-type cannon connector to the serial port of my
580 PC? 579 PC?
581 :A: Yes, it is possible, but it'll burn your s 580 :A: Yes, it is possible, but it'll burn your serial port or the pad. It
582 won't work, of course. 581 won't work, of course.
583 582
584 :Q: My joystick doesn't work with Quake / Quak 583 :Q: My joystick doesn't work with Quake / Quake 2. What's the cause?
585 :A: Quake / Quake 2 don't support joystick. Us 584 :A: Quake / Quake 2 don't support joystick. Use joy2key to simulate keypresses
586 for them. 585 for them.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.