1 ============================================== 1 ==============================================================
2 Advanced Linux Sound Architecture - Driver Con 2 Advanced Linux Sound Architecture - Driver Configuration guide
3 ============================================== 3 ==============================================================
4 4
5 5
6 Kernel Configuration 6 Kernel Configuration
7 ==================== 7 ====================
8 8
9 To enable ALSA support you need at least to bu 9 To enable ALSA support you need at least to build the kernel with
10 primary sound card support (``CONFIG_SOUND``). 10 primary sound card support (``CONFIG_SOUND``). Since ALSA can emulate
11 OSS, you don't have to choose any of the OSS m 11 OSS, you don't have to choose any of the OSS modules.
12 12
13 Enable "OSS API emulation" (``CONFIG_SND_OSSEM 13 Enable "OSS API emulation" (``CONFIG_SND_OSSEMUL``) and both OSS mixer
14 and PCM supports if you want to run OSS applic 14 and PCM supports if you want to run OSS applications with ALSA.
15 15
16 If you want to support the WaveTable functiona 16 If you want to support the WaveTable functionality on cards such as
17 SB Live! then you need to enable "Sequencer su 17 SB Live! then you need to enable "Sequencer support"
18 (``CONFIG_SND_SEQUENCER``). 18 (``CONFIG_SND_SEQUENCER``).
19 19
20 To make ALSA debug messages more verbose, enab 20 To make ALSA debug messages more verbose, enable the "Verbose printk"
21 and "Debug" options. To check for memory leak 21 and "Debug" options. To check for memory leaks, turn on "Debug memory"
22 too. "Debug detection" will add checks for th 22 too. "Debug detection" will add checks for the detection of cards.
23 23
24 Please note that all the ALSA ISA drivers supp 24 Please note that all the ALSA ISA drivers support the Linux isapnp API
25 (if the card supports ISA PnP). You don't nee 25 (if the card supports ISA PnP). You don't need to configure the cards
26 using isapnptools. 26 using isapnptools.
27 27
28 28
29 Module parameters 29 Module parameters
30 ================= 30 =================
31 31
32 The user can load modules with options. If the 32 The user can load modules with options. If the module supports more than
33 one card and you have more than one card of th 33 one card and you have more than one card of the same type then you can
34 specify multiple values for the option separat 34 specify multiple values for the option separated by commas.
35 35
36 36
37 Module snd 37 Module snd
38 ---------- 38 ----------
39 39
40 The core ALSA module. It is used by all ALSA 40 The core ALSA module. It is used by all ALSA card drivers.
41 It takes the following options which have glob 41 It takes the following options which have global effects.
42 42
43 major 43 major
44 major number for sound driver; 44 major number for sound driver;
45 Default: 116 45 Default: 116
46 cards_limit 46 cards_limit
47 limiting card index for auto-loading (1-8) 47 limiting card index for auto-loading (1-8);
48 Default: 1; 48 Default: 1;
49 For auto-loading more than one card, speci 49 For auto-loading more than one card, specify this option
50 together with snd-card-X aliases. 50 together with snd-card-X aliases.
51 slots 51 slots
52 Reserve the slot index for the given drive 52 Reserve the slot index for the given driver;
53 This option takes multiple strings. 53 This option takes multiple strings.
54 See `Module Autoloading Support`_ section 54 See `Module Autoloading Support`_ section for details.
55 debug 55 debug
56 Specifies the debug message level; 56 Specifies the debug message level;
57 (0 = disable debug prints, 1 = normal debu 57 (0 = disable debug prints, 1 = normal debug messages,
58 2 = verbose debug messages); 58 2 = verbose debug messages);
59 This option appears only when ``CONFIG_SND 59 This option appears only when ``CONFIG_SND_DEBUG=y``.
60 This option can be dynamically changed via 60 This option can be dynamically changed via sysfs
61 /sys/modules/snd/parameters/debug file. 61 /sys/modules/snd/parameters/debug file.
62 62
63 Module snd-pcm-oss 63 Module snd-pcm-oss
64 ------------------ 64 ------------------
65 65
66 The PCM OSS emulation module. 66 The PCM OSS emulation module.
67 This module takes options which change the map 67 This module takes options which change the mapping of devices.
68 68
69 dsp_map 69 dsp_map
70 PCM device number maps assigned to the 1st 70 PCM device number maps assigned to the 1st OSS device;
71 Default: 0 71 Default: 0
72 adsp_map 72 adsp_map
73 PCM device number maps assigned to the 2nd !! 73 PCM device number maps assigned to the 2st OSS device;
74 Default: 1 74 Default: 1
75 nonblock_open 75 nonblock_open
76 Don't block opening busy PCM devices; 76 Don't block opening busy PCM devices;
77 Default: 1 77 Default: 1
78 78
79 For example, when ``dsp_map=2``, /dev/dsp will 79 For example, when ``dsp_map=2``, /dev/dsp will be mapped to PCM #2 of
80 the card #0. Similarly, when ``adsp_map=0``, 80 the card #0. Similarly, when ``adsp_map=0``, /dev/adsp will be mapped
81 to PCM #0 of the card #0. 81 to PCM #0 of the card #0.
82 For changing the second or later card, specify 82 For changing the second or later card, specify the option with
83 commas, such like ``dsp_map=0,1``. 83 commas, such like ``dsp_map=0,1``.
84 84
85 ``nonblock_open`` option is used to change the 85 ``nonblock_open`` option is used to change the behavior of the PCM
86 regarding opening the device. When this optio 86 regarding opening the device. When this option is non-zero,
87 opening a busy OSS PCM device won't be blocked 87 opening a busy OSS PCM device won't be blocked but return
88 immediately with EAGAIN (just like O_NONBLOCK 88 immediately with EAGAIN (just like O_NONBLOCK flag).
89 89
90 Module snd-rawmidi 90 Module snd-rawmidi
91 ------------------ 91 ------------------
92 92
93 This module takes options which change the map 93 This module takes options which change the mapping of devices.
94 similar to those of the snd-pcm-oss module. 94 similar to those of the snd-pcm-oss module.
95 95
96 midi_map 96 midi_map
97 MIDI device number maps assigned to the 1s 97 MIDI device number maps assigned to the 1st OSS device;
98 Default: 0 98 Default: 0
99 amidi_map 99 amidi_map
100 MIDI device number maps assigned to the 2n !! 100 MIDI device number maps assigned to the 2st OSS device;
101 Default: 1 101 Default: 1
102 102
103 Module snd-soc-core <<
104 ------------------- <<
105 <<
106 The soc core module. It is used by all ALSA ca <<
107 It takes the following options which have glob <<
108 <<
109 prealloc_buffer_size_kbytes <<
110 Specify prealloc buffer size in kbytes (de <<
111 <<
112 Common parameters for top sound card modules 103 Common parameters for top sound card modules
113 -------------------------------------------- 104 --------------------------------------------
114 105
115 Each of top level sound card module takes the 106 Each of top level sound card module takes the following options.
116 107
117 index 108 index
118 index (slot #) of sound card; 109 index (slot #) of sound card;
119 Values: 0 through 31 or negative; 110 Values: 0 through 31 or negative;
120 If nonnegative, assign that index number; 111 If nonnegative, assign that index number;
121 if negative, interpret as a bitmask of per 112 if negative, interpret as a bitmask of permissible indices;
122 the first free permitted index is assigned 113 the first free permitted index is assigned;
123 Default: -1 114 Default: -1
124 id 115 id
125 card ID (identifier or name); 116 card ID (identifier or name);
126 Can be up to 15 characters long; 117 Can be up to 15 characters long;
127 Default: the card type; 118 Default: the card type;
128 A directory by this name is created under 119 A directory by this name is created under /proc/asound/
129 containing information about the card; 120 containing information about the card;
130 This ID can be used instead of the index n 121 This ID can be used instead of the index number in
131 identifying the card 122 identifying the card
132 enable 123 enable
133 enable card; 124 enable card;
134 Default: enabled, for PCI and ISA PnP card 125 Default: enabled, for PCI and ISA PnP cards
135 126
136 These options are used for either specifying t <<
137 controlling enabling and disabling of each one <<
138 are multiple devices bound with the same drive <<
139 many machines which have two HD-audio controll <<
140 audio and another for onboard analog). In most <<
141 in primary usage, and people would like to ass <<
142 appearing card. They can do it by specifying " <<
143 parameter, which will swap the assignment slot <<
144 <<
145 Today, with the sound backend like PulseAudio <<
146 supports dynamic configuration, it's of little <<
147 help for static configuration in the past. <<
148 <<
149 Module snd-adlib 127 Module snd-adlib
150 ---------------- 128 ----------------
151 129
152 Module for AdLib FM cards. 130 Module for AdLib FM cards.
153 131
154 port 132 port
155 port # for OPL chip 133 port # for OPL chip
156 134
157 This module supports multiple cards. It does n 135 This module supports multiple cards. It does not support autoprobe, so
158 the port must be specified. For actual AdLib F 136 the port must be specified. For actual AdLib FM cards it will be 0x388.
159 Note that this card does not have PCM support 137 Note that this card does not have PCM support and no mixer; only FM
160 synthesis. 138 synthesis.
161 139
162 Make sure you have ``sbiload`` from the alsa-t 140 Make sure you have ``sbiload`` from the alsa-tools package available and,
163 after loading the module, find out the assigne 141 after loading the module, find out the assigned ALSA sequencer port
164 number through ``sbiload -l``. 142 number through ``sbiload -l``.
165 143
166 Example output: 144 Example output:
167 :: 145 ::
168 146
169 Port Client name 147 Port Client name Port name
170 64:0 OPL2 FM synth 148 64:0 OPL2 FM synth OPL2 FM Port
171 149
172 Load the ``std.sb`` and ``drums.sb`` patches a 150 Load the ``std.sb`` and ``drums.sb`` patches also supplied by ``sbiload``:
173 :: 151 ::
174 152
175 sbiload -p 64:0 std.sb drums.sb 153 sbiload -p 64:0 std.sb drums.sb
176 154
177 If you use this driver to drive an OPL3, you c 155 If you use this driver to drive an OPL3, you can use ``std.o3`` and ``drums.o3``
178 instead. To have the card produce sound, use ` 156 instead. To have the card produce sound, use ``aplaymidi`` from alsa-utils:
179 :: 157 ::
180 158
181 aplaymidi -p 64:0 foo.mid 159 aplaymidi -p 64:0 foo.mid
182 160
183 Module snd-ad1816a 161 Module snd-ad1816a
184 ------------------ 162 ------------------
185 163
186 Module for sound cards based on Analog Devices 164 Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips.
187 165
188 clockfreq 166 clockfreq
189 Clock frequency for AD1816A chip (default 167 Clock frequency for AD1816A chip (default = 0, 33000Hz)
190 168
191 This module supports multiple cards, autoprobe 169 This module supports multiple cards, autoprobe and PnP.
192 170
193 Module snd-ad1848 171 Module snd-ad1848
194 ----------------- 172 -----------------
195 173
196 Module for sound cards based on AD1848/AD1847/ 174 Module for sound cards based on AD1848/AD1847/CS4248 ISA chips.
197 175
198 port 176 port
199 port # for AD1848 chip 177 port # for AD1848 chip
200 irq 178 irq
201 IRQ # for AD1848 chip 179 IRQ # for AD1848 chip
202 dma1 180 dma1
203 DMA # for AD1848 chip (0,1,3) 181 DMA # for AD1848 chip (0,1,3)
204 182
205 This module supports multiple cards. It does 183 This module supports multiple cards. It does not support autoprobe
206 thus main port must be specified!!! Other port 184 thus main port must be specified!!! Other ports are optional.
207 185
208 The power-management is supported. 186 The power-management is supported.
209 187
210 Module snd-ad1889 188 Module snd-ad1889
211 ----------------- 189 -----------------
212 190
213 Module for Analog Devices AD1889 chips. 191 Module for Analog Devices AD1889 chips.
214 192
215 ac97_quirk 193 ac97_quirk
216 AC'97 workaround for strange hardware; 194 AC'97 workaround for strange hardware;
217 See the description of intel8x0 module for 195 See the description of intel8x0 module for details.
218 196
219 This module supports multiple cards. 197 This module supports multiple cards.
220 198
221 Module snd-ali5451 199 Module snd-ali5451
222 ------------------ 200 ------------------
223 201
224 Module for ALi M5451 PCI chip. 202 Module for ALi M5451 PCI chip.
225 203
226 pcm_channels 204 pcm_channels
227 Number of hardware channels assigned for P 205 Number of hardware channels assigned for PCM
228 spdif 206 spdif
229 Support SPDIF I/O; 207 Support SPDIF I/O;
230 Default: disabled 208 Default: disabled
231 209
232 This module supports one chip and autoprobe. 210 This module supports one chip and autoprobe.
233 211
234 The power-management is supported. 212 The power-management is supported.
235 213
236 Module snd-als100 214 Module snd-als100
237 ----------------- 215 -----------------
238 216
239 Module for sound cards based on Avance Logic A 217 Module for sound cards based on Avance Logic ALS100/ALS120 ISA chips.
240 218
241 This module supports multiple cards, autoprobe 219 This module supports multiple cards, autoprobe and PnP.
242 220
243 The power-management is supported. 221 The power-management is supported.
244 222
245 Module snd-als300 223 Module snd-als300
246 ----------------- 224 -----------------
247 225
248 Module for Avance Logic ALS300 and ALS300+ 226 Module for Avance Logic ALS300 and ALS300+
249 227
250 This module supports multiple cards. 228 This module supports multiple cards.
251 229
252 The power-management is supported. 230 The power-management is supported.
253 231
254 Module snd-als4000 232 Module snd-als4000
255 ------------------ 233 ------------------
256 234
257 Module for sound cards based on Avance Logic A 235 Module for sound cards based on Avance Logic ALS4000 PCI chip.
258 236
259 joystick_port 237 joystick_port
260 port # for legacy joystick support; 238 port # for legacy joystick support;
261 0 = disabled (default), 1 = auto-detect 239 0 = disabled (default), 1 = auto-detect
262 240
263 This module supports multiple cards, autoprobe 241 This module supports multiple cards, autoprobe and PnP.
264 242
265 The power-management is supported. 243 The power-management is supported.
266 244
267 Module snd-asihpi 245 Module snd-asihpi
268 ----------------- 246 -----------------
269 247
270 Module for AudioScience ASI soundcards 248 Module for AudioScience ASI soundcards
271 249
272 enable_hpi_hwdep 250 enable_hpi_hwdep
273 enable HPI hwdep for AudioScience soundcar 251 enable HPI hwdep for AudioScience soundcard
274 252
275 This module supports multiple cards. 253 This module supports multiple cards.
276 The driver requires the firmware loader suppor 254 The driver requires the firmware loader support on kernel.
277 255
278 Module snd-atiixp 256 Module snd-atiixp
279 ----------------- 257 -----------------
280 258
281 Module for ATI IXP 150/200/250/400 AC97 contro 259 Module for ATI IXP 150/200/250/400 AC97 controllers.
282 260
283 ac97_clock 261 ac97_clock
284 AC'97 clock (default = 48000) 262 AC'97 clock (default = 48000)
285 ac97_quirk 263 ac97_quirk
286 AC'97 workaround for strange hardware; 264 AC'97 workaround for strange hardware;
287 See `AC97 Quirk Option`_ section below. 265 See `AC97 Quirk Option`_ section below.
288 ac97_codec 266 ac97_codec
289 Workaround to specify which AC'97 codec in 267 Workaround to specify which AC'97 codec instead of probing.
290 If this works for you file a bug with your 268 If this works for you file a bug with your `lspci -vn` output.
291 (-2 = Force probing, -1 = Default behavior 269 (-2 = Force probing, -1 = Default behavior, 0-2 = Use the
292 specified codec.) 270 specified codec.)
293 spdif_aclink 271 spdif_aclink
294 S/PDIF transfer over AC-link (default = 1) 272 S/PDIF transfer over AC-link (default = 1)
295 273
296 This module supports one card and autoprobe. 274 This module supports one card and autoprobe.
297 275
298 ATI IXP has two different methods to control S 276 ATI IXP has two different methods to control SPDIF output. One is
299 over AC-link and another is over the "direct" 277 over AC-link and another is over the "direct" SPDIF output. The
300 implementation depends on the motherboard, and 278 implementation depends on the motherboard, and you'll need to
301 choose the correct one via spdif_aclink module 279 choose the correct one via spdif_aclink module option.
302 280
303 The power-management is supported. 281 The power-management is supported.
304 282
305 Module snd-atiixp-modem 283 Module snd-atiixp-modem
306 ----------------------- 284 -----------------------
307 285
308 Module for ATI IXP 150/200/250 AC97 modem cont 286 Module for ATI IXP 150/200/250 AC97 modem controllers.
309 287
310 This module supports one card and autoprobe. 288 This module supports one card and autoprobe.
311 289
312 Note: The default index value of this module i 290 Note: The default index value of this module is -2, i.e. the first
313 slot is excluded. 291 slot is excluded.
314 292
315 The power-management is supported. 293 The power-management is supported.
316 294
317 Module snd-au8810, snd-au8820, snd-au8830 295 Module snd-au8810, snd-au8820, snd-au8830
318 ----------------------------------------- 296 -----------------------------------------
319 297
320 Module for Aureal Vortex, Vortex2 and Advantag 298 Module for Aureal Vortex, Vortex2 and Advantage device.
321 299
322 pcifix 300 pcifix
323 Control PCI workarounds; 301 Control PCI workarounds;
324 0 = Disable all workarounds, 302 0 = Disable all workarounds,
325 1 = Force the PCI latency of the Aureal ca 303 1 = Force the PCI latency of the Aureal card to 0xff,
326 2 = Force the Extend PCI#2 Internal Master 304 2 = Force the Extend PCI#2 Internal Master for Efficient
327 Handling of Dummy Requests on the VIA KT13 305 Handling of Dummy Requests on the VIA KT133 AGP Bridge,
328 3 = Force both settings, 306 3 = Force both settings,
329 255 = Autodetect what is required (default 307 255 = Autodetect what is required (default)
330 308
331 This module supports all ADB PCM channels, ac9 309 This module supports all ADB PCM channels, ac97 mixer, SPDIF, hardware
332 EQ, mpu401, gameport. A3D and wavetable suppor 310 EQ, mpu401, gameport. A3D and wavetable support are still in development.
333 Development and reverse engineering work is be 311 Development and reverse engineering work is being coordinated at
334 https://savannah.nongnu.org/projects/openvorte 312 https://savannah.nongnu.org/projects/openvortex/
335 SPDIF output has a copy of the AC97 codec outp 313 SPDIF output has a copy of the AC97 codec output, unless you use the
336 ``spdif`` pcm device, which allows raw data pa 314 ``spdif`` pcm device, which allows raw data passthru.
337 The hardware EQ hardware and SPDIF is only pre 315 The hardware EQ hardware and SPDIF is only present in the Vortex2 and
338 Advantage. 316 Advantage.
339 317
340 Note: Some ALSA mixer applications don't handl 318 Note: Some ALSA mixer applications don't handle the SPDIF sample rate
341 control correctly. If you have problems regard 319 control correctly. If you have problems regarding this, try
342 another ALSA compliant mixer (alsamixer works) 320 another ALSA compliant mixer (alsamixer works).
343 321
344 Module snd-azt1605 322 Module snd-azt1605
345 ------------------ 323 ------------------
346 324
347 Module for Aztech Sound Galaxy soundcards base 325 Module for Aztech Sound Galaxy soundcards based on the Aztech AZT1605
348 chipset. 326 chipset.
349 327
350 port 328 port
351 port # for BASE (0x220,0x240,0x260,0x280) 329 port # for BASE (0x220,0x240,0x260,0x280)
352 wss_port 330 wss_port
353 port # for WSS (0x530,0x604,0xe80,0xf40) 331 port # for WSS (0x530,0x604,0xe80,0xf40)
354 irq 332 irq
355 IRQ # for WSS (7,9,10,11) 333 IRQ # for WSS (7,9,10,11)
356 dma1 334 dma1
357 DMA # for WSS playback (0,1,3) 335 DMA # for WSS playback (0,1,3)
358 dma2 336 dma2
359 DMA # for WSS capture (0,1), -1 = disabled 337 DMA # for WSS capture (0,1), -1 = disabled (default)
360 mpu_port 338 mpu_port
361 port # for MPU-401 UART (0x300,0x330), -1 339 port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
362 mpu_irq 340 mpu_irq
363 IRQ # for MPU-401 UART (3,5,7,9), -1 = dis 341 IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default)
364 fm_port 342 fm_port
365 port # for OPL3 (0x388), -1 = disabled (de 343 port # for OPL3 (0x388), -1 = disabled (default)
366 344
367 This module supports multiple cards. It does n 345 This module supports multiple cards. It does not support autoprobe:
368 ``port``, ``wss_port``, ``irq`` and ``dma1`` h 346 ``port``, ``wss_port``, ``irq`` and ``dma1`` have to be specified.
369 The other values are optional. 347 The other values are optional.
370 348
371 ``port`` needs to match the BASE ADDRESS jumpe 349 ``port`` needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
372 or the value stored in the card's EEPROM for c 350 or the value stored in the card's EEPROM for cards that have an EEPROM and
373 their "CONFIG MODE" jumper set to "EEPROM SETT 351 their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
374 be chosen freely from the options enumerated a 352 be chosen freely from the options enumerated above.
375 353
376 If ``dma2`` is specified and different from `` 354 If ``dma2`` is specified and different from ``dma1``, the card will operate in
377 full-duplex mode. When ``dma1=3``, only ``dma2 355 full-duplex mode. When ``dma1=3``, only ``dma2=0`` is valid and the only way to
378 enable capture since only channels 0 and 1 are 356 enable capture since only channels 0 and 1 are available for capture.
379 357
380 Generic settings are ``port=0x220 wss_port=0x5 358 Generic settings are ``port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
381 mpu_port=0x330 mpu_irq=9 fm_port=0x388``. 359 mpu_port=0x330 mpu_irq=9 fm_port=0x388``.
382 360
383 Whatever IRQ and DMA channels you pick, be sur 361 Whatever IRQ and DMA channels you pick, be sure to reserve them for
384 legacy ISA in your BIOS. 362 legacy ISA in your BIOS.
385 363
386 Module snd-azt2316 364 Module snd-azt2316
387 ------------------ 365 ------------------
388 366
389 Module for Aztech Sound Galaxy soundcards base 367 Module for Aztech Sound Galaxy soundcards based on the Aztech AZT2316
390 chipset. 368 chipset.
391 369
392 port 370 port
393 port # for BASE (0x220,0x240,0x260,0x280) 371 port # for BASE (0x220,0x240,0x260,0x280)
394 wss_port 372 wss_port
395 port # for WSS (0x530,0x604,0xe80,0xf40) 373 port # for WSS (0x530,0x604,0xe80,0xf40)
396 irq 374 irq
397 IRQ # for WSS (7,9,10,11) 375 IRQ # for WSS (7,9,10,11)
398 dma1 376 dma1
399 DMA # for WSS playback (0,1,3) 377 DMA # for WSS playback (0,1,3)
400 dma2 378 dma2
401 DMA # for WSS capture (0,1), -1 = disabled 379 DMA # for WSS capture (0,1), -1 = disabled (default)
402 mpu_port 380 mpu_port
403 port # for MPU-401 UART (0x300,0x330), -1 381 port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
404 mpu_irq 382 mpu_irq
405 IRQ # for MPU-401 UART (5,7,9,10), -1 = di 383 IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default)
406 fm_port 384 fm_port
407 port # for OPL3 (0x388), -1 = disabled (de 385 port # for OPL3 (0x388), -1 = disabled (default)
408 386
409 This module supports multiple cards. It does n 387 This module supports multiple cards. It does not support autoprobe:
410 ``port``, ``wss_port``, ``irq`` and ``dma1`` h 388 ``port``, ``wss_port``, ``irq`` and ``dma1`` have to be specified.
411 The other values are optional. 389 The other values are optional.
412 390
413 ``port`` needs to match the BASE ADDRESS jumpe 391 ``port`` needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
414 or the value stored in the card's EEPROM for c 392 or the value stored in the card's EEPROM for cards that have an EEPROM and
415 their "CONFIG MODE" jumper set to "EEPROM SETT 393 their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
416 be chosen freely from the options enumerated a 394 be chosen freely from the options enumerated above.
417 395
418 If ``dma2`` is specified and different from `` 396 If ``dma2`` is specified and different from ``dma1``, the card will operate in
419 full-duplex mode. When ``dma1=3``, only ``dma2 397 full-duplex mode. When ``dma1=3``, only ``dma2=0`` is valid and the only way to
420 enable capture since only channels 0 and 1 are 398 enable capture since only channels 0 and 1 are available for capture.
421 399
422 Generic settings are ``port=0x220 wss_port=0x5 400 Generic settings are ``port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
423 mpu_port=0x330 mpu_irq=9 fm_port=0x388``. 401 mpu_port=0x330 mpu_irq=9 fm_port=0x388``.
424 402
425 Whatever IRQ and DMA channels you pick, be sur 403 Whatever IRQ and DMA channels you pick, be sure to reserve them for
426 legacy ISA in your BIOS. 404 legacy ISA in your BIOS.
427 405
428 Module snd-aw2 406 Module snd-aw2
429 -------------- 407 --------------
430 408
431 Module for Audiowerk2 sound card 409 Module for Audiowerk2 sound card
432 410
433 This module supports multiple cards. 411 This module supports multiple cards.
434 412
435 Module snd-azt2320 413 Module snd-azt2320
436 ------------------ 414 ------------------
437 415
438 Module for sound cards based on Aztech System 416 Module for sound cards based on Aztech System AZT2320 ISA chip (PnP only).
439 417
440 This module supports multiple cards, PnP and a 418 This module supports multiple cards, PnP and autoprobe.
441 419
442 The power-management is supported. 420 The power-management is supported.
443 421
444 Module snd-azt3328 422 Module snd-azt3328
445 ------------------ 423 ------------------
446 424
447 Module for sound cards based on Aztech AZF3328 425 Module for sound cards based on Aztech AZF3328 PCI chip.
448 426
449 joystick 427 joystick
450 Enable joystick (default off) 428 Enable joystick (default off)
451 429
452 This module supports multiple cards. 430 This module supports multiple cards.
453 431
454 Module snd-bt87x 432 Module snd-bt87x
455 ---------------- 433 ----------------
456 434
457 Module for video cards based on Bt87x chips. 435 Module for video cards based on Bt87x chips.
458 436
459 digital_rate 437 digital_rate
460 Override the default digital rate (Hz) 438 Override the default digital rate (Hz)
461 load_all 439 load_all
462 Load the driver even if the card model isn 440 Load the driver even if the card model isn't known
463 441
464 This module supports multiple cards. 442 This module supports multiple cards.
465 443
466 Note: The default index value of this module i 444 Note: The default index value of this module is -2, i.e. the first
467 slot is excluded. 445 slot is excluded.
468 446
469 Module snd-ca0106 447 Module snd-ca0106
470 ----------------- 448 -----------------
471 449
472 Module for Creative Audigy LS and SB Live 24bi 450 Module for Creative Audigy LS and SB Live 24bit
473 451
474 This module supports multiple cards. 452 This module supports multiple cards.
475 453
476 454
477 Module snd-cmi8330 455 Module snd-cmi8330
478 ------------------ 456 ------------------
479 457
480 Module for sound cards based on C-Media CMI833 458 Module for sound cards based on C-Media CMI8330 ISA chips.
481 459
482 isapnp 460 isapnp
483 ISA PnP detection - 0 = disable, 1 = enabl 461 ISA PnP detection - 0 = disable, 1 = enable (default)
484 462
485 with ``isapnp=0``, the following options are a 463 with ``isapnp=0``, the following options are available:
486 464
487 wssport 465 wssport
488 port # for CMI8330 chip (WSS) 466 port # for CMI8330 chip (WSS)
489 wssirq 467 wssirq
490 IRQ # for CMI8330 chip (WSS) 468 IRQ # for CMI8330 chip (WSS)
491 wssdma 469 wssdma
492 first DMA # for CMI8330 chip (WSS) 470 first DMA # for CMI8330 chip (WSS)
493 sbport 471 sbport
494 port # for CMI8330 chip (SB16) 472 port # for CMI8330 chip (SB16)
495 sbirq 473 sbirq
496 IRQ # for CMI8330 chip (SB16) 474 IRQ # for CMI8330 chip (SB16)
497 sbdma8 475 sbdma8
498 8bit DMA # for CMI8330 chip (SB16) 476 8bit DMA # for CMI8330 chip (SB16)
499 sbdma16 477 sbdma16
500 16bit DMA # for CMI8330 chip (SB16) 478 16bit DMA # for CMI8330 chip (SB16)
501 fmport 479 fmport
502 (optional) OPL3 I/O port 480 (optional) OPL3 I/O port
503 mpuport 481 mpuport
504 (optional) MPU401 I/O port 482 (optional) MPU401 I/O port
505 mpuirq 483 mpuirq
506 (optional) MPU401 irq # 484 (optional) MPU401 irq #
507 485
508 This module supports multiple cards and autopr 486 This module supports multiple cards and autoprobe.
509 487
510 The power-management is supported. 488 The power-management is supported.
511 489
512 Module snd-cmipci 490 Module snd-cmipci
513 ----------------- 491 -----------------
514 492
515 Module for C-Media CMI8338/8738/8768/8770 PCI 493 Module for C-Media CMI8338/8738/8768/8770 PCI sound cards.
516 494
517 mpu_port 495 mpu_port
518 port address of MIDI interface (8338 only) 496 port address of MIDI interface (8338 only):
519 0x300,0x310,0x320,0x330 = legacy port, 497 0x300,0x310,0x320,0x330 = legacy port,
520 1 = integrated PCI port (default on 8738), 498 1 = integrated PCI port (default on 8738),
521 0 = disable 499 0 = disable
522 fm_port 500 fm_port
523 port address of OPL-3 FM synthesizer (8x38 501 port address of OPL-3 FM synthesizer (8x38 only):
524 0x388 = legacy port, 502 0x388 = legacy port,
525 1 = integrated PCI port (default on 8738), 503 1 = integrated PCI port (default on 8738),
526 0 = disable 504 0 = disable
527 soft_ac3 505 soft_ac3
528 Software-conversion of raw SPDIF packets ( 506 Software-conversion of raw SPDIF packets (model 033 only) (default = 1)
529 joystick_port 507 joystick_port
530 Joystick port address (0 = disable, 1 = au 508 Joystick port address (0 = disable, 1 = auto-detect)
531 509
532 This module supports autoprobe and multiple ca 510 This module supports autoprobe and multiple cards.
533 511
534 The power-management is supported. 512 The power-management is supported.
535 513
536 Module snd-cs4231 514 Module snd-cs4231
537 ----------------- 515 -----------------
538 516
539 Module for sound cards based on CS4231 ISA chi 517 Module for sound cards based on CS4231 ISA chips.
540 518
541 port 519 port
542 port # for CS4231 chip 520 port # for CS4231 chip
543 mpu_port 521 mpu_port
544 port # for MPU-401 UART (optional), -1 = d 522 port # for MPU-401 UART (optional), -1 = disable
545 irq 523 irq
546 IRQ # for CS4231 chip 524 IRQ # for CS4231 chip
547 mpu_irq 525 mpu_irq
548 IRQ # for MPU-401 UART 526 IRQ # for MPU-401 UART
549 dma1 527 dma1
550 first DMA # for CS4231 chip 528 first DMA # for CS4231 chip
551 dma2 529 dma2
552 second DMA # for CS4231 chip 530 second DMA # for CS4231 chip
553 531
554 This module supports multiple cards. This modu 532 This module supports multiple cards. This module does not support autoprobe
555 thus main port must be specified!!! Other port 533 thus main port must be specified!!! Other ports are optional.
556 534
557 The power-management is supported. 535 The power-management is supported.
558 536
559 Module snd-cs4236 537 Module snd-cs4236
560 ----------------- 538 -----------------
561 539
562 Module for sound cards based on CS4232/CS4232A 540 Module for sound cards based on CS4232/CS4232A,
563 CS4235/CS4236/CS4236B/CS4237B/CS4238B/CS4239 I 541 CS4235/CS4236/CS4236B/CS4237B/CS4238B/CS4239 ISA chips.
564 542
565 isapnp 543 isapnp
566 ISA PnP detection - 0 = disable, 1 = enabl 544 ISA PnP detection - 0 = disable, 1 = enable (default)
567 545
568 with ``isapnp=0``, the following options are a 546 with ``isapnp=0``, the following options are available:
569 547
570 port 548 port
571 port # for CS4236 chip (PnP setup - 0x534) 549 port # for CS4236 chip (PnP setup - 0x534)
572 cport 550 cport
573 control port # for CS4236 chip (PnP setup 551 control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00)
574 mpu_port 552 mpu_port
575 port # for MPU-401 UART (PnP setup - 0x300 553 port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
576 fm_port 554 fm_port
577 FM port # for CS4236 chip (PnP setup - 0x3 555 FM port # for CS4236 chip (PnP setup - 0x388), -1 = disable
578 irq 556 irq
579 IRQ # for CS4236 chip (5,7,9,11,12,15) 557 IRQ # for CS4236 chip (5,7,9,11,12,15)
580 mpu_irq 558 mpu_irq
581 IRQ # for MPU-401 UART (9,11,12,15) 559 IRQ # for MPU-401 UART (9,11,12,15)
582 dma1 560 dma1
583 first DMA # for CS4236 chip (0,1,3) 561 first DMA # for CS4236 chip (0,1,3)
584 dma2 562 dma2
585 second DMA # for CS4236 chip (0,1,3), -1 = 563 second DMA # for CS4236 chip (0,1,3), -1 = disable
586 564
587 This module supports multiple cards. This modu 565 This module supports multiple cards. This module does not support autoprobe
588 (if ISA PnP is not used) thus main port and co 566 (if ISA PnP is not used) thus main port and control port must be
589 specified!!! Other ports are optional. 567 specified!!! Other ports are optional.
590 568
591 The power-management is supported. 569 The power-management is supported.
592 570
593 This module is aliased as snd-cs4232 since it 571 This module is aliased as snd-cs4232 since it provides the old
594 snd-cs4232 functionality, too. 572 snd-cs4232 functionality, too.
595 573
596 Module snd-cs4281 574 Module snd-cs4281
597 ----------------- 575 -----------------
598 576
599 Module for Cirrus Logic CS4281 soundchip. 577 Module for Cirrus Logic CS4281 soundchip.
600 578
601 dual_codec 579 dual_codec
602 Secondary codec ID (0 = disable, default) 580 Secondary codec ID (0 = disable, default)
603 581
604 This module supports multiple cards. 582 This module supports multiple cards.
605 583
606 The power-management is supported. 584 The power-management is supported.
607 585
608 Module snd-cs46xx 586 Module snd-cs46xx
609 ----------------- 587 -----------------
610 588
611 Module for PCI sound cards based on CS4610/CS4 589 Module for PCI sound cards based on CS4610/CS4612/CS4614/CS4615/CS4622/
612 CS4624/CS4630/CS4280 PCI chips. 590 CS4624/CS4630/CS4280 PCI chips.
613 591
614 external_amp 592 external_amp
615 Force to enable external amplifier. 593 Force to enable external amplifier.
616 thinkpad 594 thinkpad
617 Force to enable Thinkpad's CLKRUN control. 595 Force to enable Thinkpad's CLKRUN control.
618 mmap_valid 596 mmap_valid
619 Support OSS mmap mode (default = 0). 597 Support OSS mmap mode (default = 0).
620 598
621 This module supports multiple cards and autopr 599 This module supports multiple cards and autoprobe.
622 Usually external amp and CLKRUN controls are d 600 Usually external amp and CLKRUN controls are detected automatically
623 from PCI sub vendor/device ids. If they don't 601 from PCI sub vendor/device ids. If they don't work, give the options
624 above explicitly. 602 above explicitly.
625 603
626 The power-management is supported. 604 The power-management is supported.
627 605
628 Module snd-cs5530 606 Module snd-cs5530
629 ----------------- 607 -----------------
630 608
631 Module for Cyrix/NatSemi Geode 5530 chip. 609 Module for Cyrix/NatSemi Geode 5530 chip.
632 610
633 Module snd-cs5535audio 611 Module snd-cs5535audio
634 ---------------------- 612 ----------------------
635 613
636 Module for multifunction CS5535 companion PCI 614 Module for multifunction CS5535 companion PCI device
637 615
638 The power-management is supported. 616 The power-management is supported.
639 617
640 Module snd-ctxfi 618 Module snd-ctxfi
641 ---------------- 619 ----------------
642 620
643 Module for Creative Sound Blaster X-Fi boards 621 Module for Creative Sound Blaster X-Fi boards (20k1 / 20k2 chips)
644 622
645 * Creative Sound Blaster X-Fi Titanium Fatal1t 623 * Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series
646 * Creative Sound Blaster X-Fi Titanium Fatal1t 624 * Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
647 * Creative Sound Blaster X-Fi Titanium Profess 625 * Creative Sound Blaster X-Fi Titanium Professional Audio
648 * Creative Sound Blaster X-Fi Titanium 626 * Creative Sound Blaster X-Fi Titanium
649 * Creative Sound Blaster X-Fi Elite Pro 627 * Creative Sound Blaster X-Fi Elite Pro
650 * Creative Sound Blaster X-Fi Platinum 628 * Creative Sound Blaster X-Fi Platinum
651 * Creative Sound Blaster X-Fi Fatal1ty 629 * Creative Sound Blaster X-Fi Fatal1ty
652 * Creative Sound Blaster X-Fi XtremeGamer 630 * Creative Sound Blaster X-Fi XtremeGamer
653 * Creative Sound Blaster X-Fi XtremeMusic 631 * Creative Sound Blaster X-Fi XtremeMusic
654 632
655 reference_rate 633 reference_rate
656 reference sample rate, 44100 or 48000 (def 634 reference sample rate, 44100 or 48000 (default)
657 multiple 635 multiple
658 multiple to ref. sample rate, 1 or 2 (defa 636 multiple to ref. sample rate, 1 or 2 (default)
659 subsystem 637 subsystem
660 override the PCI SSID for probing; 638 override the PCI SSID for probing;
661 the value consists of SSVID << 16 | SSDID. 639 the value consists of SSVID << 16 | SSDID.
662 The default is zero, which means no overri 640 The default is zero, which means no override.
663 641
664 This module supports multiple cards. 642 This module supports multiple cards.
665 643
666 Module snd-darla20 644 Module snd-darla20
667 ------------------ 645 ------------------
668 646
669 Module for Echoaudio Darla20 647 Module for Echoaudio Darla20
670 648
671 This module supports multiple cards. 649 This module supports multiple cards.
672 The driver requires the firmware loader suppor 650 The driver requires the firmware loader support on kernel.
673 651
674 Module snd-darla24 652 Module snd-darla24
675 ------------------ 653 ------------------
676 654
677 Module for Echoaudio Darla24 655 Module for Echoaudio Darla24
678 656
679 This module supports multiple cards. 657 This module supports multiple cards.
680 The driver requires the firmware loader suppor 658 The driver requires the firmware loader support on kernel.
681 659
682 Module snd-dt019x 660 Module snd-dt019x
683 ----------------- 661 -----------------
684 662
685 Module for Diamond Technologies DT-019X / Avan 663 Module for Diamond Technologies DT-019X / Avance Logic ALS-007 (PnP
686 only) 664 only)
687 665
688 This module supports multiple cards. This mod 666 This module supports multiple cards. This module is enabled only with
689 ISA PnP support. 667 ISA PnP support.
690 668
691 The power-management is supported. 669 The power-management is supported.
692 670
693 Module snd-dummy 671 Module snd-dummy
694 ---------------- 672 ----------------
695 673
696 Module for the dummy sound card. This "card" d 674 Module for the dummy sound card. This "card" doesn't do any output
697 or input, but you may use this module for any 675 or input, but you may use this module for any application which
698 requires a sound card (like RealPlayer). 676 requires a sound card (like RealPlayer).
699 677
700 pcm_devs 678 pcm_devs
701 Number of PCM devices assigned to each car 679 Number of PCM devices assigned to each card (default = 1, up to 4)
702 pcm_substreams 680 pcm_substreams
703 Number of PCM substreams assigned to each 681 Number of PCM substreams assigned to each PCM (default = 8, up to 128)
704 hrtimer 682 hrtimer
705 Use hrtimer (=1, default) or system timer 683 Use hrtimer (=1, default) or system timer (=0)
706 fake_buffer 684 fake_buffer
707 Fake buffer allocations (default = 1) 685 Fake buffer allocations (default = 1)
708 686
709 When multiple PCM devices are created, snd-dum 687 When multiple PCM devices are created, snd-dummy gives different
710 behavior to each PCM device: 688 behavior to each PCM device:
711 * 0 = interleaved with mmap support 689 * 0 = interleaved with mmap support
712 * 1 = non-interleaved with mmap support 690 * 1 = non-interleaved with mmap support
713 * 2 = interleaved without mmap 691 * 2 = interleaved without mmap
714 * 3 = non-interleaved without mmap 692 * 3 = non-interleaved without mmap
715 693
716 As default, snd-dummy drivers doesn't allocate 694 As default, snd-dummy drivers doesn't allocate the real buffers
717 but either ignores read/write or mmap a single 695 but either ignores read/write or mmap a single dummy page to all
718 buffer pages, in order to save the resources. 696 buffer pages, in order to save the resources. If your apps need
719 the read/ written buffer data to be consistent 697 the read/ written buffer data to be consistent, pass fake_buffer=0
720 option. 698 option.
721 699
722 The power-management is supported. 700 The power-management is supported.
723 701
724 Module snd-echo3g 702 Module snd-echo3g
725 ----------------- 703 -----------------
726 704
727 Module for Echoaudio 3G cards (Gina3G/Layla3G) 705 Module for Echoaudio 3G cards (Gina3G/Layla3G)
728 706
729 This module supports multiple cards. 707 This module supports multiple cards.
730 The driver requires the firmware loader suppor 708 The driver requires the firmware loader support on kernel.
731 709
732 Module snd-emu10k1 710 Module snd-emu10k1
733 ------------------ 711 ------------------
734 712
735 Module for EMU10K1/EMU10k2 based PCI sound car 713 Module for EMU10K1/EMU10k2 based PCI sound cards.
736 714
737 * Sound Blaster Live! 715 * Sound Blaster Live!
738 * Sound Blaster PCI 512 716 * Sound Blaster PCI 512
>> 717 * Emu APS (partially supported)
739 * Sound Blaster Audigy 718 * Sound Blaster Audigy
740 * E-MU APS (partially supported) !! 719
741 * E-MU DAS <<
742 <<
743 extin 720 extin
744 bitmap of available external inputs for FX !! 721 bitmap of available external inputs for FX8010 (see bellow)
745 extout 722 extout
746 bitmap of available external outputs for F !! 723 bitmap of available external outputs for FX8010 (see bellow)
747 seq_ports 724 seq_ports
748 allocated sequencer ports (4 by default) 725 allocated sequencer ports (4 by default)
749 max_synth_voices 726 max_synth_voices
750 limit of voices used for wavetable (64 by 727 limit of voices used for wavetable (64 by default)
751 max_buffer_size 728 max_buffer_size
752 specifies the maximum size of wavetable/pc 729 specifies the maximum size of wavetable/pcm buffers given in MB
753 unit. Default value is 128. 730 unit. Default value is 128.
754 enable_ir 731 enable_ir
755 enable IR 732 enable IR
756 733
757 This module supports multiple cards and autopr 734 This module supports multiple cards and autoprobe.
758 735
759 Input & Output configurations 736 Input & Output configurations [extin/extout]
760 * Creative Card wo/Digital out 737 * Creative Card wo/Digital out [0x0003/0x1f03]
761 * Creative Card w/Digital out 738 * Creative Card w/Digital out [0x0003/0x1f0f]
762 * Creative Card w/Digital CD in 739 * Creative Card w/Digital CD in [0x000f/0x1f0f]
763 * Creative Card wo/Digital out + LiveDrive 740 * Creative Card wo/Digital out + LiveDrive [0x3fc3/0x1fc3]
764 * Creative Card w/Digital out + LiveDrive 741 * Creative Card w/Digital out + LiveDrive [0x3fc3/0x1fcf]
765 * Creative Card w/Digital CD in + LiveDrive 742 * Creative Card w/Digital CD in + LiveDrive [0x3fcf/0x1fcf]
766 * Creative Card wo/Digital out + Digital I/O 2 743 * Creative Card wo/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
767 * Creative Card w/Digital out + Digital I/O 2 744 * Creative Card w/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
768 * Creative Card w/Digital CD in + Digital I/O 745 * Creative Card w/Digital CD in + Digital I/O 2 [0x0fcf/0x1f0f]
769 * Creative Card 5.1/w Digital out + LiveDrive 746 * Creative Card 5.1/w Digital out + LiveDrive [0x3fc3/0x1fff]
770 * Creative Card 5.1 (c) 2003 747 * Creative Card 5.1 (c) 2003 [0x3fc3/0x7cff]
771 * Creative Card all ins and outs 748 * Creative Card all ins and outs [0x3fff/0x7fff]
772 749
773 The power-management is supported. 750 The power-management is supported.
774 751
775 Module snd-emu10k1x 752 Module snd-emu10k1x
776 ------------------- 753 -------------------
777 754
778 Module for Creative Emu10k1X (SB Live Dell OEM 755 Module for Creative Emu10k1X (SB Live Dell OEM version)
779 756
780 This module supports multiple cards. 757 This module supports multiple cards.
781 758
782 Module snd-ens1370 759 Module snd-ens1370
783 ------------------ 760 ------------------
784 761
785 Module for Ensoniq AudioPCI ES1370 PCI sound c 762 Module for Ensoniq AudioPCI ES1370 PCI sound cards.
786 763
787 * SoundBlaster PCI 64 764 * SoundBlaster PCI 64
788 * SoundBlaster PCI 128 765 * SoundBlaster PCI 128
789 766
790 joystick 767 joystick
791 Enable joystick (default off) 768 Enable joystick (default off)
792 769
793 This module supports multiple cards and autopr 770 This module supports multiple cards and autoprobe.
794 771
795 The power-management is supported. 772 The power-management is supported.
796 773
797 Module snd-ens1371 774 Module snd-ens1371
798 ------------------ 775 ------------------
799 776
800 Module for Ensoniq AudioPCI ES1371 PCI sound c 777 Module for Ensoniq AudioPCI ES1371 PCI sound cards.
801 778
802 * SoundBlaster PCI 64 779 * SoundBlaster PCI 64
803 * SoundBlaster PCI 128 780 * SoundBlaster PCI 128
804 * SoundBlaster Vibra PCI 781 * SoundBlaster Vibra PCI
805 782
806 joystick_port 783 joystick_port
807 port # for joystick (0x200,0x208,0x210,0x2 784 port # for joystick (0x200,0x208,0x210,0x218), 0 = disable
808 (default), 1 = auto-detect 785 (default), 1 = auto-detect
809 786
810 This module supports multiple cards and autopr 787 This module supports multiple cards and autoprobe.
811 788
812 The power-management is supported. 789 The power-management is supported.
813 790
814 Module snd-es1688 791 Module snd-es1688
815 ----------------- 792 -----------------
816 793
817 Module for ESS AudioDrive ES-1688 and ES-688 s 794 Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
818 795
819 isapnp 796 isapnp
820 ISA PnP detection - 0 = disable, 1 = enabl 797 ISA PnP detection - 0 = disable, 1 = enable (default)
821 mpu_port 798 mpu_port
822 port # for MPU-401 port (0x300,0x310,0x320 799 port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
823 mpu_irq 800 mpu_irq
824 IRQ # for MPU-401 port (5,7,9,10) 801 IRQ # for MPU-401 port (5,7,9,10)
825 fm_port 802 fm_port
826 port # for OPL3 (option; share the same po 803 port # for OPL3 (option; share the same port as default)
827 804
828 with ``isapnp=0``, the following additional op 805 with ``isapnp=0``, the following additional options are available:
829 806
830 port 807 port
831 port # for ES-1688 chip (0x220,0x240,0x260 808 port # for ES-1688 chip (0x220,0x240,0x260)
832 irq 809 irq
833 IRQ # for ES-1688 chip (5,7,9,10) 810 IRQ # for ES-1688 chip (5,7,9,10)
834 dma8 811 dma8
835 DMA # for ES-1688 chip (0,1,3) 812 DMA # for ES-1688 chip (0,1,3)
836 813
837 This module supports multiple cards and autopr 814 This module supports multiple cards and autoprobe (without MPU-401 port)
838 and PnP with the ES968 chip. 815 and PnP with the ES968 chip.
839 816
840 Module snd-es18xx 817 Module snd-es18xx
841 ----------------- 818 -----------------
842 819
843 Module for ESS AudioDrive ES-18xx sound cards. 820 Module for ESS AudioDrive ES-18xx sound cards.
844 821
845 isapnp 822 isapnp
846 ISA PnP detection - 0 = disable, 1 = enabl 823 ISA PnP detection - 0 = disable, 1 = enable (default)
847 824
848 with ``isapnp=0``, the following options are a 825 with ``isapnp=0``, the following options are available:
849 826
850 port 827 port
851 port # for ES-18xx chip (0x220,0x240,0x260 828 port # for ES-18xx chip (0x220,0x240,0x260)
852 mpu_port 829 mpu_port
853 port # for MPU-401 port (0x300,0x310,0x320 830 port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
854 fm_port 831 fm_port
855 port # for FM (optional, not used) 832 port # for FM (optional, not used)
856 irq 833 irq
857 IRQ # for ES-18xx chip (5,7,9,10) 834 IRQ # for ES-18xx chip (5,7,9,10)
858 dma1 835 dma1
859 first DMA # for ES-18xx chip (0,1,3) 836 first DMA # for ES-18xx chip (0,1,3)
860 dma2 837 dma2
861 first DMA # for ES-18xx chip (0,1,3) 838 first DMA # for ES-18xx chip (0,1,3)
862 839
863 This module supports multiple cards, ISA PnP a 840 This module supports multiple cards, ISA PnP and autoprobe (without MPU-401
864 port if native ISA PnP routines are not used). 841 port if native ISA PnP routines are not used).
865 When ``dma2`` is equal with ``dma1``, the driv 842 When ``dma2`` is equal with ``dma1``, the driver works as half-duplex.
866 843
867 The power-management is supported. 844 The power-management is supported.
868 845
869 Module snd-es1938 846 Module snd-es1938
870 ----------------- 847 -----------------
871 848
872 Module for sound cards based on ESS Solo-1 (ES 849 Module for sound cards based on ESS Solo-1 (ES1938,ES1946) chips.
873 850
874 This module supports multiple cards and autopr 851 This module supports multiple cards and autoprobe.
875 852
876 The power-management is supported. 853 The power-management is supported.
877 854
878 Module snd-es1968 855 Module snd-es1968
879 ----------------- 856 -----------------
880 857
881 Module for sound cards based on ESS Maestro-1/ 858 Module for sound cards based on ESS Maestro-1/2/2E (ES1968/ES1978) chips.
882 859
883 total_bufsize 860 total_bufsize
884 total buffer size in kB (1-4096kB) 861 total buffer size in kB (1-4096kB)
885 pcm_substreams_p 862 pcm_substreams_p
886 playback channels (1-8, default=2) 863 playback channels (1-8, default=2)
887 pcm_substreams_c 864 pcm_substreams_c
888 capture channels (1-8, default=0) 865 capture channels (1-8, default=0)
889 clock 866 clock
890 clock (0 = auto-detection) 867 clock (0 = auto-detection)
891 use_pm 868 use_pm
892 support the power-management (0 = off, 1 = 869 support the power-management (0 = off, 1 = on, 2 = auto (default))
893 enable_mpu 870 enable_mpu
894 enable MPU401 (0 = off, 1 = on, 2 = auto ( 871 enable MPU401 (0 = off, 1 = on, 2 = auto (default))
895 joystick 872 joystick
896 enable joystick (default off) 873 enable joystick (default off)
897 874
898 This module supports multiple cards and autopr 875 This module supports multiple cards and autoprobe.
899 876
900 The power-management is supported. 877 The power-management is supported.
901 878
902 Module snd-fm801 879 Module snd-fm801
903 ---------------- 880 ----------------
904 881
905 Module for ForteMedia FM801 based PCI sound ca 882 Module for ForteMedia FM801 based PCI sound cards.
906 883
907 tea575x_tuner 884 tea575x_tuner
908 Enable TEA575x tuner; 885 Enable TEA575x tuner;
909 1 = MediaForte 256-PCS, 886 1 = MediaForte 256-PCS,
910 2 = MediaForte 256-PCPR, 887 2 = MediaForte 256-PCPR,
911 3 = MediaForte 64-PCR 888 3 = MediaForte 64-PCR
912 High 16-bits are video (radio) device numb 889 High 16-bits are video (radio) device number + 1;
913 example: 0x10002 (MediaForte 256-PCPR, dev 890 example: 0x10002 (MediaForte 256-PCPR, device 1)
914 891
915 This module supports multiple cards and autopr 892 This module supports multiple cards and autoprobe.
916 893
917 The power-management is supported. 894 The power-management is supported.
918 895
919 Module snd-gina20 896 Module snd-gina20
920 ----------------- 897 -----------------
921 898
922 Module for Echoaudio Gina20 899 Module for Echoaudio Gina20
923 900
924 This module supports multiple cards. 901 This module supports multiple cards.
925 The driver requires the firmware loader suppor 902 The driver requires the firmware loader support on kernel.
926 903
927 Module snd-gina24 904 Module snd-gina24
928 ----------------- 905 -----------------
929 906
930 Module for Echoaudio Gina24 907 Module for Echoaudio Gina24
931 908
932 This module supports multiple cards. 909 This module supports multiple cards.
933 The driver requires the firmware loader suppor 910 The driver requires the firmware loader support on kernel.
934 911
935 Module snd-gusclassic 912 Module snd-gusclassic
936 --------------------- 913 ---------------------
937 914
938 Module for Gravis UltraSound Classic sound car 915 Module for Gravis UltraSound Classic sound card.
939 916
940 port 917 port
941 port # for GF1 chip (0x220,0x230,0x240,0x2 918 port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
942 irq 919 irq
943 IRQ # for GF1 chip (3,5,9,11,12,15) 920 IRQ # for GF1 chip (3,5,9,11,12,15)
944 dma1 921 dma1
945 DMA # for GF1 chip (1,3,5,6,7) 922 DMA # for GF1 chip (1,3,5,6,7)
946 dma2 923 dma2
947 DMA # for GF1 chip (1,3,5,6,7,-1=disable) 924 DMA # for GF1 chip (1,3,5,6,7,-1=disable)
948 joystick_dac 925 joystick_dac
949 0 to 31, (0.59V-4.52V or 0.389V-2.98V) 926 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
950 voices 927 voices
951 GF1 voices limit (14-32) 928 GF1 voices limit (14-32)
952 pcm_voices 929 pcm_voices
953 reserved PCM voices 930 reserved PCM voices
954 931
955 This module supports multiple cards and autopr 932 This module supports multiple cards and autoprobe.
956 933
957 Module snd-gusextreme 934 Module snd-gusextreme
958 --------------------- 935 ---------------------
959 936
960 Module for Gravis UltraSound Extreme (Synergy 937 Module for Gravis UltraSound Extreme (Synergy ViperMax) sound card.
961 938
962 port 939 port
963 port # for ES-1688 chip (0x220,0x230,0x240 940 port # for ES-1688 chip (0x220,0x230,0x240,0x250,0x260)
964 gf1_port 941 gf1_port
965 port # for GF1 chip (0x210,0x220,0x230,0x2 942 port # for GF1 chip (0x210,0x220,0x230,0x240,0x250,0x260,0x270)
966 mpu_port 943 mpu_port
967 port # for MPU-401 port (0x300,0x310,0x320 944 port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable
968 irq 945 irq
969 IRQ # for ES-1688 chip (5,7,9,10) 946 IRQ # for ES-1688 chip (5,7,9,10)
970 gf1_irq 947 gf1_irq
971 IRQ # for GF1 chip (3,5,9,11,12,15) 948 IRQ # for GF1 chip (3,5,9,11,12,15)
972 mpu_irq 949 mpu_irq
973 IRQ # for MPU-401 port (5,7,9,10) 950 IRQ # for MPU-401 port (5,7,9,10)
974 dma8 951 dma8
975 DMA # for ES-1688 chip (0,1,3) 952 DMA # for ES-1688 chip (0,1,3)
976 dma1 953 dma1
977 DMA # for GF1 chip (1,3,5,6,7) 954 DMA # for GF1 chip (1,3,5,6,7)
978 joystick_dac 955 joystick_dac
979 0 to 31, (0.59V-4.52V or 0.389V-2.98V) 956 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
980 voices 957 voices
981 GF1 voices limit (14-32) 958 GF1 voices limit (14-32)
982 pcm_voices 959 pcm_voices
983 reserved PCM voices 960 reserved PCM voices
984 961
985 This module supports multiple cards and autopr 962 This module supports multiple cards and autoprobe (without MPU-401 port).
986 963
987 Module snd-gusmax 964 Module snd-gusmax
988 ----------------- 965 -----------------
989 966
990 Module for Gravis UltraSound MAX sound card. 967 Module for Gravis UltraSound MAX sound card.
991 968
992 port 969 port
993 port # for GF1 chip (0x220,0x230,0x240,0x2 970 port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
994 irq 971 irq
995 IRQ # for GF1 chip (3,5,9,11,12,15) 972 IRQ # for GF1 chip (3,5,9,11,12,15)
996 dma1 973 dma1
997 DMA # for GF1 chip (1,3,5,6,7) 974 DMA # for GF1 chip (1,3,5,6,7)
998 dma2 975 dma2
999 DMA # for GF1 chip (1,3,5,6,7,-1=disable) 976 DMA # for GF1 chip (1,3,5,6,7,-1=disable)
1000 joystick_dac 977 joystick_dac
1001 0 to 31, (0.59V-4.52V or 0.389V-2.98V) 978 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1002 voices 979 voices
1003 GF1 voices limit (14-32) 980 GF1 voices limit (14-32)
1004 pcm_voices 981 pcm_voices
1005 reserved PCM voices 982 reserved PCM voices
1006 983
1007 This module supports multiple cards and autop 984 This module supports multiple cards and autoprobe.
1008 985
1009 Module snd-hda-intel 986 Module snd-hda-intel
1010 -------------------- 987 --------------------
1011 988
1012 Module for Intel HD Audio (ICH6, ICH6M, ESB2, 989 Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10,
1013 PCH, SCH), ATI SB450, SB600, R600, RS600, RS6 990 PCH, SCH), ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620,
1014 RV630, RV635, RV670, RV770, VIA VT8251/VT8237 991 RV630, RV635, RV670, RV770, VIA VT8251/VT8237A, SIS966, ULI M5461
1015 992
1016 [Multiple options for each card instance] 993 [Multiple options for each card instance]
1017 994
1018 model 995 model
1019 force the model name 996 force the model name
1020 position_fix 997 position_fix
1021 Fix DMA pointer; 998 Fix DMA pointer;
1022 -1 = system default: choose appropriate o 999 -1 = system default: choose appropriate one per controller hardware,
1023 0 = auto: falls back to LPIB when POSBUF 1000 0 = auto: falls back to LPIB when POSBUF doesn't work,
1024 1 = use LPIB, 1001 1 = use LPIB,
1025 2 = POSBUF: use position buffer, 1002 2 = POSBUF: use position buffer,
1026 3 = VIACOMBO: VIA-specific workaround for 1003 3 = VIACOMBO: VIA-specific workaround for capture,
1027 4 = COMBO: use LPIB for playback, auto fo 1004 4 = COMBO: use LPIB for playback, auto for capture stream
1028 5 = SKL+: apply the delay calculation ava 1005 5 = SKL+: apply the delay calculation available on recent Intel chips
1029 6 = FIFO: correct the position with the f 1006 6 = FIFO: correct the position with the fixed FIFO size, for recent AMD chips
1030 probe_mask 1007 probe_mask
1031 Bitmask to probe codecs (default = -1, me 1008 Bitmask to probe codecs (default = -1, meaning all slots);
1032 When the bit 8 (0x100) is set, the lower 1009 When the bit 8 (0x100) is set, the lower 8 bits are used
1033 as the "fixed" codec slots; i.e. the driv 1010 as the "fixed" codec slots; i.e. the driver probes the
1034 slots regardless what hardware reports ba 1011 slots regardless what hardware reports back
1035 probe_only 1012 probe_only
1036 Only probing and no codec initialization 1013 Only probing and no codec initialization (default=off);
1037 Useful to check the initial codec status 1014 Useful to check the initial codec status for debugging
1038 bdl_pos_adj 1015 bdl_pos_adj
1039 Specifies the DMA IRQ timing delay in sam 1016 Specifies the DMA IRQ timing delay in samples.
1040 Passing -1 will make the driver to choose 1017 Passing -1 will make the driver to choose the appropriate
1041 value based on the controller chip. 1018 value based on the controller chip.
1042 patch 1019 patch
1043 Specifies the early "patch" files to modi 1020 Specifies the early "patch" files to modify the HD-audio setup
1044 before initializing the codecs. 1021 before initializing the codecs.
1045 This option is available only when ``CONF 1022 This option is available only when ``CONFIG_SND_HDA_PATCH_LOADER=y``
1046 is set. See hd-audio/notes.rst for detai 1023 is set. See hd-audio/notes.rst for details.
1047 beep_mode 1024 beep_mode
1048 Selects the beep registration mode (0=off 1025 Selects the beep registration mode (0=off, 1=on);
1049 default value is set via ``CONFIG_SND_HDA 1026 default value is set via ``CONFIG_SND_HDA_INPUT_BEEP_MODE`` kconfig.
1050 1027
1051 [Single (global) options] 1028 [Single (global) options]
1052 1029
1053 single_cmd 1030 single_cmd
1054 Use single immediate commands to communic 1031 Use single immediate commands to communicate with codecs
1055 (for debugging only) 1032 (for debugging only)
1056 enable_msi 1033 enable_msi
1057 Enable Message Signaled Interrupt (MSI) ( 1034 Enable Message Signaled Interrupt (MSI) (default = off)
1058 power_save 1035 power_save
1059 Automatic power-saving timeout (in second 1036 Automatic power-saving timeout (in second, 0 = disable)
1060 power_save_controller 1037 power_save_controller
1061 Reset HD-audio controller in power-saving 1038 Reset HD-audio controller in power-saving mode (default = on)
1062 pm_blacklist <<
1063 Enable / disable power-management deny-li <<
1064 deny-list, 0 = skip PM deny-list, 1 = for <<
1065 align_buffer_size 1039 align_buffer_size
1066 Force rounding of buffer/period sizes to 1040 Force rounding of buffer/period sizes to multiples of 128 bytes.
1067 This is more efficient in terms of memory 1041 This is more efficient in terms of memory access but isn't
1068 required by the HDA spec and prevents use 1042 required by the HDA spec and prevents users from specifying
1069 exact period/buffer sizes. (default = on) 1043 exact period/buffer sizes. (default = on)
1070 snoop 1044 snoop
1071 Enable/disable snooping (default = on) 1045 Enable/disable snooping (default = on)
1072 1046
1073 This module supports multiple cards and autop 1047 This module supports multiple cards and autoprobe.
1074 1048
1075 See hd-audio/notes.rst for more details about 1049 See hd-audio/notes.rst for more details about HD-audio driver.
1076 1050
1077 Each codec may have a model table for differe 1051 Each codec may have a model table for different configurations.
1078 If your machine isn't listed there, the defau 1052 If your machine isn't listed there, the default (usually minimal)
1079 configuration is set up. You can pass ``mode 1053 configuration is set up. You can pass ``model=<name>`` option to
1080 specify a certain model in such a case. Ther 1054 specify a certain model in such a case. There are different
1081 models depending on the codec chip. The list 1055 models depending on the codec chip. The list of available models
1082 is found in hd-audio/models.rst. 1056 is found in hd-audio/models.rst.
1083 1057
1084 The model name ``generic`` is treated as a sp 1058 The model name ``generic`` is treated as a special case. When this
1085 model is given, the driver uses the generic c 1059 model is given, the driver uses the generic codec parser without
1086 "codec-patch". It's sometimes good for testi 1060 "codec-patch". It's sometimes good for testing and debugging.
1087 1061
1088 The model option can be used also for aliasin <<
1089 SSID. When it's passed in the form of ``mode <<
1090 and YYYY are the sub-vendor and sub-device ID <<
1091 respectively, the driver will refer to that S <<
1092 quirk table. <<
1093 <<
1094 If the default configuration doesn't work and 1062 If the default configuration doesn't work and one of the above
1095 matches with your device, report it together 1063 matches with your device, report it together with alsa-info.sh
1096 output (with ``--no-upload`` option) to kerne 1064 output (with ``--no-upload`` option) to kernel bugzilla or alsa-devel
1097 ML (see the section `Links and Addresses`_). 1065 ML (see the section `Links and Addresses`_).
1098 1066
1099 ``power_save`` and ``power_save_controller`` 1067 ``power_save`` and ``power_save_controller`` options are for power-saving
1100 mode. See powersave.rst for details. 1068 mode. See powersave.rst for details.
1101 1069
1102 Note 2: If you get click noises on output, tr 1070 Note 2: If you get click noises on output, try the module option
1103 ``position_fix=1`` or ``2``. ``position_fix= 1071 ``position_fix=1`` or ``2``. ``position_fix=1`` will use the SD_LPIB
1104 register value without FIFO size correction a 1072 register value without FIFO size correction as the current
1105 DMA pointer. ``position_fix=2`` will make th 1073 DMA pointer. ``position_fix=2`` will make the driver to use
1106 the position buffer instead of reading SD_LPI 1074 the position buffer instead of reading SD_LPIB register.
1107 (Usually SD_LPIB register is more accurate th 1075 (Usually SD_LPIB register is more accurate than the
1108 position buffer.) 1076 position buffer.)
1109 1077
1110 ``position_fix=3`` is specific to VIA devices 1078 ``position_fix=3`` is specific to VIA devices. The position
1111 of the capture stream is checked from both LP 1079 of the capture stream is checked from both LPIB and POSBUF
1112 values. ``position_fix=4`` is a combination 1080 values. ``position_fix=4`` is a combination mode, using LPIB
1113 for playback and POSBUF for capture. 1081 for playback and POSBUF for capture.
1114 1082
1115 NB: If you get many ``azx_get_response timeou 1083 NB: If you get many ``azx_get_response timeout`` messages at
1116 loading, it's likely a problem of interrupts 1084 loading, it's likely a problem of interrupts (e.g. ACPI irq
1117 routing). Try to boot with options like ``pc 1085 routing). Try to boot with options like ``pci=noacpi``. Also, you
1118 can try ``single_cmd=1`` module option. This 1086 can try ``single_cmd=1`` module option. This will switch the
1119 communication method between HDA controller a 1087 communication method between HDA controller and codecs to the
1120 single immediate commands instead of CORB/RIR 1088 single immediate commands instead of CORB/RIRB. Basically, the
1121 single command mode is provided only for BIOS 1089 single command mode is provided only for BIOS, and you won't get
1122 unsolicited events, too. But, at least, this 1090 unsolicited events, too. But, at least, this works independently
1123 from the irq. Remember this is a last resort 1091 from the irq. Remember this is a last resort, and should be
1124 avoided as much as possible... 1092 avoided as much as possible...
1125 1093
1126 MORE NOTES ON ``azx_get_response timeout`` PR 1094 MORE NOTES ON ``azx_get_response timeout`` PROBLEMS:
1127 On some hardware, you may need to add a prope 1095 On some hardware, you may need to add a proper probe_mask option
1128 to avoid the ``azx_get_response timeout`` pro 1096 to avoid the ``azx_get_response timeout`` problem above, instead.
1129 This occurs when the access to non-existing o 1097 This occurs when the access to non-existing or non-working codec slot
1130 (likely a modem one) causes a stall of the co 1098 (likely a modem one) causes a stall of the communication via HD-audio
1131 bus. You can see which codec slots are probe 1099 bus. You can see which codec slots are probed by enabling
1132 ``CONFIG_SND_DEBUG_VERBOSE``, or simply from 1100 ``CONFIG_SND_DEBUG_VERBOSE``, or simply from the file name of the codec
1133 proc files. Then limit the slots to probe by 1101 proc files. Then limit the slots to probe by probe_mask option.
1134 For example, ``probe_mask=1`` means to probe 1102 For example, ``probe_mask=1`` means to probe only the first slot, and
1135 ``probe_mask=4`` means only the third slot. 1103 ``probe_mask=4`` means only the third slot.
1136 1104
1137 The power-management is supported. 1105 The power-management is supported.
1138 1106
1139 Module snd-hdsp 1107 Module snd-hdsp
1140 --------------- 1108 ---------------
1141 1109
1142 Module for RME Hammerfall DSP audio interface 1110 Module for RME Hammerfall DSP audio interface(s)
1143 1111
1144 This module supports multiple cards. 1112 This module supports multiple cards.
1145 1113
1146 Note: The firmware data can be automatically 1114 Note: The firmware data can be automatically loaded via hotplug
1147 when ``CONFIG_FW_LOADER`` is set. Otherwise, 1115 when ``CONFIG_FW_LOADER`` is set. Otherwise, you need to load
1148 the firmware via hdsploader utility included 1116 the firmware via hdsploader utility included in alsa-tools
1149 package. 1117 package.
1150 The firmware data is found in alsa-firmware p 1118 The firmware data is found in alsa-firmware package.
1151 1119
1152 Note: snd-page-alloc module does the job whic 1120 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1153 module did formerly. It will allocate the bu 1121 module did formerly. It will allocate the buffers in advance
1154 when any HDSP cards are found. To make the b 1122 when any HDSP cards are found. To make the buffer
1155 allocation sure, load snd-page-alloc module i 1123 allocation sure, load snd-page-alloc module in the early
1156 stage of boot sequence. See `Early Buffer Al 1124 stage of boot sequence. See `Early Buffer Allocation`_
1157 section. 1125 section.
1158 1126
1159 Module snd-hdspm 1127 Module snd-hdspm
1160 ---------------- 1128 ----------------
1161 1129
1162 Module for RME HDSP MADI board. 1130 Module for RME HDSP MADI board.
1163 1131
1164 precise_ptr 1132 precise_ptr
1165 Enable precise pointer, or disable. 1133 Enable precise pointer, or disable.
1166 line_outs_monitor 1134 line_outs_monitor
1167 Send playback streams to analog outs by d 1135 Send playback streams to analog outs by default.
1168 enable_monitor 1136 enable_monitor
1169 Enable Analog Out on Channel 63/64 by def 1137 Enable Analog Out on Channel 63/64 by default.
1170 1138
1171 See hdspm.rst for details. 1139 See hdspm.rst for details.
1172 1140
1173 Module snd-ice1712 1141 Module snd-ice1712
1174 ------------------ 1142 ------------------
1175 1143
1176 Module for Envy24 (ICE1712) based PCI sound c 1144 Module for Envy24 (ICE1712) based PCI sound cards.
1177 1145
1178 * MidiMan M Audio Delta 1010 1146 * MidiMan M Audio Delta 1010
1179 * MidiMan M Audio Delta 1010LT 1147 * MidiMan M Audio Delta 1010LT
1180 * MidiMan M Audio Delta DiO 2496 1148 * MidiMan M Audio Delta DiO 2496
1181 * MidiMan M Audio Delta 66 1149 * MidiMan M Audio Delta 66
1182 * MidiMan M Audio Delta 44 1150 * MidiMan M Audio Delta 44
1183 * MidiMan M Audio Delta 410 1151 * MidiMan M Audio Delta 410
1184 * MidiMan M Audio Audiophile 2496 1152 * MidiMan M Audio Audiophile 2496
1185 * TerraTec EWS 88MT 1153 * TerraTec EWS 88MT
1186 * TerraTec EWS 88D 1154 * TerraTec EWS 88D
1187 * TerraTec EWX 24/96 1155 * TerraTec EWX 24/96
1188 * TerraTec DMX 6Fire 1156 * TerraTec DMX 6Fire
1189 * TerraTec Phase 88 1157 * TerraTec Phase 88
1190 * Hoontech SoundTrack DSP 24 1158 * Hoontech SoundTrack DSP 24
1191 * Hoontech SoundTrack DSP 24 Value 1159 * Hoontech SoundTrack DSP 24 Value
1192 * Hoontech SoundTrack DSP 24 Media 7.1 1160 * Hoontech SoundTrack DSP 24 Media 7.1
1193 * Event Electronics, EZ8 1161 * Event Electronics, EZ8
1194 * Digigram VX442 1162 * Digigram VX442
1195 * Lionstracs, Mediastaton 1163 * Lionstracs, Mediastaton
1196 * Terrasoniq TS 88 1164 * Terrasoniq TS 88
1197 1165
1198 model 1166 model
1199 Use the given board model, one of the fol 1167 Use the given board model, one of the following:
1200 delta1010, dio2496, delta66, delta44, aud 1168 delta1010, dio2496, delta66, delta44, audiophile, delta410,
1201 delta1010lt, vx442, ewx2496, ews88mt, ews 1169 delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,
1202 dmx6fire, dsp24, dsp24_value, dsp24_71, e 1170 dmx6fire, dsp24, dsp24_value, dsp24_71, ez8,
1203 phase88, mediastation 1171 phase88, mediastation
1204 omni 1172 omni
1205 Omni I/O support for MidiMan M-Audio Delt 1173 Omni I/O support for MidiMan M-Audio Delta44/66
1206 cs8427_timeout 1174 cs8427_timeout
1207 reset timeout for the CS8427 chip (S/PDIF 1175 reset timeout for the CS8427 chip (S/PDIF transceiver) in msec
1208 resolution, default value is 500 (0.5 sec 1176 resolution, default value is 500 (0.5 sec)
1209 1177
1210 This module supports multiple cards and autop 1178 This module supports multiple cards and autoprobe.
1211 Note: The consumer part is not used with all 1179 Note: The consumer part is not used with all Envy24 based cards (for
1212 example in the MidiMan Delta siree). 1180 example in the MidiMan Delta siree).
1213 1181
1214 Note: The supported board is detected by read 1182 Note: The supported board is detected by reading EEPROM or PCI
1215 SSID (if EEPROM isn't available). You can ov 1183 SSID (if EEPROM isn't available). You can override the
1216 model by passing ``model`` module option in c 1184 model by passing ``model`` module option in case that the
1217 driver isn't configured properly or you want 1185 driver isn't configured properly or you want to try another
1218 type for testing. 1186 type for testing.
1219 1187
1220 Module snd-ice1724 1188 Module snd-ice1724
1221 ------------------ 1189 ------------------
1222 1190
1223 Module for Envy24HT (VT/ICE1724), Envy24PT (V 1191 Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
1224 1192
1225 * MidiMan M Audio Revolution 5.1 1193 * MidiMan M Audio Revolution 5.1
1226 * MidiMan M Audio Revolution 7.1 1194 * MidiMan M Audio Revolution 7.1
1227 * MidiMan M Audio Audiophile 192 1195 * MidiMan M Audio Audiophile 192
1228 * AMP Ltd AUDIO2000 1196 * AMP Ltd AUDIO2000
1229 * TerraTec Aureon 5.1 Sky 1197 * TerraTec Aureon 5.1 Sky
1230 * TerraTec Aureon 7.1 Space 1198 * TerraTec Aureon 7.1 Space
1231 * TerraTec Aureon 7.1 Universe 1199 * TerraTec Aureon 7.1 Universe
1232 * TerraTec Phase 22 1200 * TerraTec Phase 22
1233 * TerraTec Phase 28 1201 * TerraTec Phase 28
1234 * AudioTrak Prodigy 7.1 1202 * AudioTrak Prodigy 7.1
1235 * AudioTrak Prodigy 7.1 LT 1203 * AudioTrak Prodigy 7.1 LT
1236 * AudioTrak Prodigy 7.1 XT 1204 * AudioTrak Prodigy 7.1 XT
1237 * AudioTrak Prodigy 7.1 HIFI 1205 * AudioTrak Prodigy 7.1 HIFI
1238 * AudioTrak Prodigy 7.1 HD2 1206 * AudioTrak Prodigy 7.1 HD2
1239 * AudioTrak Prodigy 192 1207 * AudioTrak Prodigy 192
1240 * Pontis MS300 1208 * Pontis MS300
1241 * Albatron K8X800 Pro II 1209 * Albatron K8X800 Pro II
1242 * Chaintech ZNF3-150 1210 * Chaintech ZNF3-150
1243 * Chaintech ZNF3-250 1211 * Chaintech ZNF3-250
1244 * Chaintech 9CJS 1212 * Chaintech 9CJS
1245 * Chaintech AV-710 1213 * Chaintech AV-710
1246 * Shuttle SN25P 1214 * Shuttle SN25P
1247 * Onkyo SE-90PCI 1215 * Onkyo SE-90PCI
1248 * Onkyo SE-200PCI 1216 * Onkyo SE-200PCI
1249 * ESI Juli@ 1217 * ESI Juli@
1250 * ESI Maya44 1218 * ESI Maya44
1251 * Hercules Fortissimo IV 1219 * Hercules Fortissimo IV
1252 * EGO-SYS WaveTerminal 192M 1220 * EGO-SYS WaveTerminal 192M
1253 1221
1254 model 1222 model
1255 Use the given board model, one of the fol 1223 Use the given board model, one of the following:
1256 revo51, revo71, amp2000, prodigy71, prodi 1224 revo51, revo71, amp2000, prodigy71, prodigy71lt,
1257 prodigy71xt, prodigy71hifi, prodigyhd2, p 1225 prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
1258 juli, aureon51, aureon71, universe, ap192 1226 juli, aureon51, aureon71, universe, ap192, k8x800,
1259 phase22, phase28, ms300, av710, se200pci, 1227 phase22, phase28, ms300, av710, se200pci, se90pci,
1260 fortissimo4, sn25p, WT192M, maya44 1228 fortissimo4, sn25p, WT192M, maya44
1261 1229
1262 This module supports multiple cards and autop 1230 This module supports multiple cards and autoprobe.
1263 1231
1264 Note: The supported board is detected by read 1232 Note: The supported board is detected by reading EEPROM or PCI
1265 SSID (if EEPROM isn't available). You can ov 1233 SSID (if EEPROM isn't available). You can override the
1266 model by passing ``model`` module option in c 1234 model by passing ``model`` module option in case that the
1267 driver isn't configured properly or you want 1235 driver isn't configured properly or you want to try another
1268 type for testing. 1236 type for testing.
1269 1237
1270 Module snd-indigo 1238 Module snd-indigo
1271 ----------------- 1239 -----------------
1272 1240
1273 Module for Echoaudio Indigo 1241 Module for Echoaudio Indigo
1274 1242
1275 This module supports multiple cards. 1243 This module supports multiple cards.
1276 The driver requires the firmware loader suppo 1244 The driver requires the firmware loader support on kernel.
1277 1245
1278 Module snd-indigodj 1246 Module snd-indigodj
1279 ------------------- 1247 -------------------
1280 1248
1281 Module for Echoaudio Indigo DJ 1249 Module for Echoaudio Indigo DJ
1282 1250
1283 This module supports multiple cards. 1251 This module supports multiple cards.
1284 The driver requires the firmware loader suppo 1252 The driver requires the firmware loader support on kernel.
1285 1253
1286 Module snd-indigoio 1254 Module snd-indigoio
1287 ------------------- 1255 -------------------
1288 1256
1289 Module for Echoaudio Indigo IO 1257 Module for Echoaudio Indigo IO
1290 1258
1291 This module supports multiple cards. 1259 This module supports multiple cards.
1292 The driver requires the firmware loader suppo 1260 The driver requires the firmware loader support on kernel.
1293 1261
1294 Module snd-intel8x0 1262 Module snd-intel8x0
1295 ------------------- 1263 -------------------
1296 1264
1297 Module for AC'97 motherboards from Intel and 1265 Module for AC'97 motherboards from Intel and compatibles.
1298 1266
1299 * Intel i810/810E, i815, i820, i830, i84x, MX 1267 * Intel i810/810E, i815, i820, i830, i84x, MX440 ICH5, ICH6, ICH7,
1300 6300ESB, ESB2 1268 6300ESB, ESB2
1301 * SiS 7012 (SiS 735) 1269 * SiS 7012 (SiS 735)
1302 * NVidia NForce, NForce2, NForce3, MCP04, CK8 1270 * NVidia NForce, NForce2, NForce3, MCP04, CK804 CK8, CK8S, MCP501
1303 * AMD AMD768, AMD8111 1271 * AMD AMD768, AMD8111
1304 * ALi m5455 1272 * ALi m5455
1305 1273
1306 ac97_clock 1274 ac97_clock
1307 AC'97 codec clock base (0 = auto-detect) 1275 AC'97 codec clock base (0 = auto-detect)
1308 ac97_quirk 1276 ac97_quirk
1309 AC'97 workaround for strange hardware; 1277 AC'97 workaround for strange hardware;
1310 See `AC97 Quirk Option`_ section below. 1278 See `AC97 Quirk Option`_ section below.
1311 buggy_irq 1279 buggy_irq
1312 Enable workaround for buggy interrupts on 1280 Enable workaround for buggy interrupts on some motherboards
1313 (default yes on nForce chips, otherwise o 1281 (default yes on nForce chips, otherwise off)
1314 buggy_semaphore 1282 buggy_semaphore
1315 Enable workaround for hardware with buggy 1283 Enable workaround for hardware with buggy semaphores (e.g. on some
1316 ASUS laptops) (default off) 1284 ASUS laptops) (default off)
1317 spdif_aclink 1285 spdif_aclink
1318 Use S/PDIF over AC-link instead of direct 1286 Use S/PDIF over AC-link instead of direct connection from the
1319 controller chip (0 = off, 1 = on, -1 = de 1287 controller chip (0 = off, 1 = on, -1 = default)
1320 1288
1321 This module supports one chip and autoprobe. 1289 This module supports one chip and autoprobe.
1322 1290
1323 Note: the latest driver supports auto-detecti 1291 Note: the latest driver supports auto-detection of chip clock.
1324 if you still encounter too fast playback, spe 1292 if you still encounter too fast playback, specify the clock
1325 explicitly via the module option ``ac97_clock 1293 explicitly via the module option ``ac97_clock=41194``.
1326 1294
1327 Joystick/MIDI ports are not supported by this 1295 Joystick/MIDI ports are not supported by this driver. If your
1328 motherboard has these devices, use the ns558 1296 motherboard has these devices, use the ns558 or snd-mpu401
1329 modules, respectively. 1297 modules, respectively.
1330 1298
1331 The power-management is supported. 1299 The power-management is supported.
1332 1300
1333 Module snd-intel8x0m 1301 Module snd-intel8x0m
1334 -------------------- 1302 --------------------
1335 1303
1336 Module for Intel ICH (i8x0) chipset MC97 mode 1304 Module for Intel ICH (i8x0) chipset MC97 modems.
1337 1305
1338 * Intel i810/810E, i815, i820, i830, i84x, MX 1306 * Intel i810/810E, i815, i820, i830, i84x, MX440 ICH5, ICH6, ICH7
1339 * SiS 7013 (SiS 735) 1307 * SiS 7013 (SiS 735)
1340 * NVidia NForce, NForce2, NForce2s, NForce3 1308 * NVidia NForce, NForce2, NForce2s, NForce3
1341 * AMD AMD8111 1309 * AMD AMD8111
1342 * ALi m5455 1310 * ALi m5455
1343 1311
1344 ac97_clock 1312 ac97_clock
1345 AC'97 codec clock base (0 = auto-detect) 1313 AC'97 codec clock base (0 = auto-detect)
1346 1314
1347 This module supports one card and autoprobe. 1315 This module supports one card and autoprobe.
1348 1316
1349 Note: The default index value of this module 1317 Note: The default index value of this module is -2, i.e. the first
1350 slot is excluded. 1318 slot is excluded.
1351 1319
1352 The power-management is supported. 1320 The power-management is supported.
1353 1321
1354 Module snd-interwave 1322 Module snd-interwave
1355 -------------------- 1323 --------------------
1356 1324
1357 Module for Gravis UltraSound PnP, Dynasonic 3 1325 Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32
1358 and other sound cards based on AMD InterWave 1326 and other sound cards based on AMD InterWave (tm) chip.
1359 1327
1360 joystick_dac 1328 joystick_dac
1361 0 to 31, (0.59V-4.52V or 0.389V-2.98V) 1329 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1362 midi 1330 midi
1363 1 = MIDI UART enable, 0 = MIDI UART disab 1331 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1364 pcm_voices 1332 pcm_voices
1365 reserved PCM voices for the synthesizer ( 1333 reserved PCM voices for the synthesizer (default 2)
1366 effect 1334 effect
1367 1 = InterWave effects enable (default 0); 1335 1 = InterWave effects enable (default 0); requires 8 voices
1368 isapnp 1336 isapnp
1369 ISA PnP detection - 0 = disable, 1 = enab 1337 ISA PnP detection - 0 = disable, 1 = enable (default)
1370 1338
1371 with ``isapnp=0``, the following options are 1339 with ``isapnp=0``, the following options are available:
1372 1340
1373 port 1341 port
1374 port # for InterWave chip (0x210,0x220,0x 1342 port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1375 irq 1343 irq
1376 IRQ # for InterWave chip (3,5,9,11,12,15) 1344 IRQ # for InterWave chip (3,5,9,11,12,15)
1377 dma1 1345 dma1
1378 DMA # for InterWave chip (0,1,3,5,6,7) 1346 DMA # for InterWave chip (0,1,3,5,6,7)
1379 dma2 1347 dma2
1380 DMA # for InterWave chip (0,1,3,5,6,7,-1= 1348 DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1381 1349
1382 This module supports multiple cards, autoprob 1350 This module supports multiple cards, autoprobe and ISA PnP.
1383 1351
1384 Module snd-interwave-stb 1352 Module snd-interwave-stb
1385 ------------------------ 1353 ------------------------
1386 1354
1387 Module for UltraSound 32-Pro (sound card from 1355 Module for UltraSound 32-Pro (sound card from STB used by Compaq)
1388 and other sound cards based on AMD InterWave 1356 and other sound cards based on AMD InterWave (tm) chip with TEA6330T
1389 circuit for extended control of bass, treble 1357 circuit for extended control of bass, treble and master volume.
1390 1358
1391 joystick_dac 1359 joystick_dac
1392 0 to 31, (0.59V-4.52V or 0.389V-2.98V) 1360 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1393 midi 1361 midi
1394 1 = MIDI UART enable, 0 = MIDI UART disab 1362 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1395 pcm_voices 1363 pcm_voices
1396 reserved PCM voices for the synthesizer ( 1364 reserved PCM voices for the synthesizer (default 2)
1397 effect 1365 effect
1398 1 = InterWave effects enable (default 0); 1366 1 = InterWave effects enable (default 0); requires 8 voices
1399 isapnp 1367 isapnp
1400 ISA PnP detection - 0 = disable, 1 = enab 1368 ISA PnP detection - 0 = disable, 1 = enable (default)
1401 1369
1402 with ``isapnp=0``, the following options are 1370 with ``isapnp=0``, the following options are available:
1403 1371
1404 port 1372 port
1405 port # for InterWave chip (0x210,0x220,0x 1373 port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1406 port_tc 1374 port_tc
1407 tone control (i2c bus) port # for TEA6330 1375 tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380)
1408 irq 1376 irq
1409 IRQ # for InterWave chip (3,5,9,11,12,15) 1377 IRQ # for InterWave chip (3,5,9,11,12,15)
1410 dma1 1378 dma1
1411 DMA # for InterWave chip (0,1,3,5,6,7) 1379 DMA # for InterWave chip (0,1,3,5,6,7)
1412 dma2 1380 dma2
1413 DMA # for InterWave chip (0,1,3,5,6,7,-1= 1381 DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1414 1382
1415 This module supports multiple cards, autoprob 1383 This module supports multiple cards, autoprobe and ISA PnP.
1416 1384
1417 Module snd-jazz16 1385 Module snd-jazz16
1418 ------------------- 1386 -------------------
1419 1387
1420 Module for Media Vision Jazz16 chipset. The c 1388 Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips:
1421 MVD1216 + MVA416 + MVA514. 1389 MVD1216 + MVA416 + MVA514.
1422 1390
1423 port 1391 port
1424 port # for SB DSP chip (0x210,0x220,0x230 1392 port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260)
1425 irq 1393 irq
1426 IRQ # for SB DSP chip (3,5,7,9,10,15) 1394 IRQ # for SB DSP chip (3,5,7,9,10,15)
1427 dma8 1395 dma8
1428 DMA # for SB DSP chip (1,3) 1396 DMA # for SB DSP chip (1,3)
1429 dma16 1397 dma16
1430 DMA # for SB DSP chip (5,7) 1398 DMA # for SB DSP chip (5,7)
1431 mpu_port 1399 mpu_port
1432 MPU-401 port # (0x300,0x310,0x320,0x330) 1400 MPU-401 port # (0x300,0x310,0x320,0x330)
1433 mpu_irq 1401 mpu_irq
1434 MPU-401 irq # (2,3,5,7) 1402 MPU-401 irq # (2,3,5,7)
1435 1403
1436 This module supports multiple cards. 1404 This module supports multiple cards.
1437 1405
1438 Module snd-korg1212 1406 Module snd-korg1212
1439 ------------------- 1407 -------------------
1440 1408
1441 Module for Korg 1212 IO PCI card 1409 Module for Korg 1212 IO PCI card
1442 1410
1443 This module supports multiple cards. 1411 This module supports multiple cards.
1444 1412
1445 Module snd-layla20 1413 Module snd-layla20
1446 ------------------ 1414 ------------------
1447 1415
1448 Module for Echoaudio Layla20 1416 Module for Echoaudio Layla20
1449 1417
1450 This module supports multiple cards. 1418 This module supports multiple cards.
1451 The driver requires the firmware loader suppo 1419 The driver requires the firmware loader support on kernel.
1452 1420
1453 Module snd-layla24 1421 Module snd-layla24
1454 ------------------ 1422 ------------------
1455 1423
1456 Module for Echoaudio Layla24 1424 Module for Echoaudio Layla24
1457 1425
1458 This module supports multiple cards. 1426 This module supports multiple cards.
1459 The driver requires the firmware loader suppo 1427 The driver requires the firmware loader support on kernel.
1460 1428
1461 Module snd-lola 1429 Module snd-lola
1462 --------------- 1430 ---------------
1463 1431
1464 Module for Digigram Lola PCI-e boards 1432 Module for Digigram Lola PCI-e boards
1465 1433
1466 This module supports multiple cards. 1434 This module supports multiple cards.
1467 1435
1468 Module snd-lx6464es 1436 Module snd-lx6464es
1469 ------------------- 1437 -------------------
1470 1438
1471 Module for Digigram LX6464ES boards 1439 Module for Digigram LX6464ES boards
1472 1440
1473 This module supports multiple cards. 1441 This module supports multiple cards.
1474 1442
1475 Module snd-maestro3 1443 Module snd-maestro3
1476 ------------------- 1444 -------------------
1477 1445
1478 Module for Allegro/Maestro3 chips 1446 Module for Allegro/Maestro3 chips
1479 1447
1480 external_amp 1448 external_amp
1481 enable external amp (enabled by default) 1449 enable external amp (enabled by default)
1482 amp_gpio 1450 amp_gpio
1483 GPIO pin number for external amp (0-15) o 1451 GPIO pin number for external amp (0-15) or -1 for default pin (8
1484 for allegro, 1 for others) 1452 for allegro, 1 for others)
1485 1453
1486 This module supports autoprobe and multiple c 1454 This module supports autoprobe and multiple chips.
1487 1455
1488 Note: the binding of amplifier is dependent o 1456 Note: the binding of amplifier is dependent on hardware.
1489 If there is no sound even though all channels 1457 If there is no sound even though all channels are unmuted, try to
1490 specify other gpio connection via amp_gpio op 1458 specify other gpio connection via amp_gpio option.
1491 For example, a Panasonic notebook might need 1459 For example, a Panasonic notebook might need ``amp_gpio=0x0d``
1492 option. 1460 option.
1493 1461
1494 The power-management is supported. 1462 The power-management is supported.
1495 1463
1496 Module snd-mia 1464 Module snd-mia
1497 --------------- 1465 ---------------
1498 1466
1499 Module for Echoaudio Mia 1467 Module for Echoaudio Mia
1500 1468
1501 This module supports multiple cards. 1469 This module supports multiple cards.
1502 The driver requires the firmware loader suppo 1470 The driver requires the firmware loader support on kernel.
1503 1471
1504 Module snd-miro 1472 Module snd-miro
1505 --------------- 1473 ---------------
1506 1474
1507 Module for Miro soundcards: miroSOUND PCM 1 p 1475 Module for Miro soundcards: miroSOUND PCM 1 pro, miroSOUND PCM 12,
1508 miroSOUND PCM 20 Radio. 1476 miroSOUND PCM 20 Radio.
1509 1477
1510 port 1478 port
1511 Port # (0x530,0x604,0xe80,0xf40) 1479 Port # (0x530,0x604,0xe80,0xf40)
1512 irq 1480 irq
1513 IRQ # (5,7,9,10,11) 1481 IRQ # (5,7,9,10,11)
1514 dma1 1482 dma1
1515 1st dma # (0,1,3) 1483 1st dma # (0,1,3)
1516 dma2 1484 dma2
1517 2nd dma # (0,1) 1485 2nd dma # (0,1)
1518 mpu_port 1486 mpu_port
1519 MPU-401 port # (0x300,0x310,0x320,0x330) 1487 MPU-401 port # (0x300,0x310,0x320,0x330)
1520 mpu_irq 1488 mpu_irq
1521 MPU-401 irq # (5,7,9,10) 1489 MPU-401 irq # (5,7,9,10)
1522 fm_port 1490 fm_port
1523 FM Port # (0x388) 1491 FM Port # (0x388)
1524 wss 1492 wss
1525 enable WSS mode 1493 enable WSS mode
1526 ide 1494 ide
1527 enable onboard ide support 1495 enable onboard ide support
1528 1496
1529 Module snd-mixart 1497 Module snd-mixart
1530 ----------------- 1498 -----------------
1531 1499
1532 Module for Digigram miXart8 sound cards. 1500 Module for Digigram miXart8 sound cards.
1533 1501
1534 This module supports multiple cards. 1502 This module supports multiple cards.
1535 Note: One miXart8 board will be represented a 1503 Note: One miXart8 board will be represented as 4 alsa cards.
1536 See Documentation/sound/cards/mixart.rst for 1504 See Documentation/sound/cards/mixart.rst for details.
1537 1505
1538 When the driver is compiled as a module and t 1506 When the driver is compiled as a module and the hotplug firmware
1539 is supported, the firmware data is loaded via 1507 is supported, the firmware data is loaded via hotplug automatically.
1540 Install the necessary firmware files in alsa- 1508 Install the necessary firmware files in alsa-firmware package.
1541 When no hotplug fw loader is available, you n 1509 When no hotplug fw loader is available, you need to load the
1542 firmware via mixartloader utility in alsa-too 1510 firmware via mixartloader utility in alsa-tools package.
1543 1511
1544 Module snd-mona 1512 Module snd-mona
1545 --------------- 1513 ---------------
1546 1514
1547 Module for Echoaudio Mona 1515 Module for Echoaudio Mona
1548 1516
1549 This module supports multiple cards. 1517 This module supports multiple cards.
1550 The driver requires the firmware loader suppo 1518 The driver requires the firmware loader support on kernel.
1551 1519
1552 Module snd-mpu401 1520 Module snd-mpu401
1553 ----------------- 1521 -----------------
1554 1522
1555 Module for MPU-401 UART devices. 1523 Module for MPU-401 UART devices.
1556 1524
1557 port 1525 port
1558 port number or -1 (disable) 1526 port number or -1 (disable)
1559 irq 1527 irq
1560 IRQ number or -1 (disable) 1528 IRQ number or -1 (disable)
1561 pnp 1529 pnp
1562 PnP detection - 0 = disable, 1 = enable ( 1530 PnP detection - 0 = disable, 1 = enable (default)
1563 1531
1564 This module supports multiple devices and PnP 1532 This module supports multiple devices and PnP.
1565 1533
1566 Module snd-msnd-classic 1534 Module snd-msnd-classic
1567 ----------------------- 1535 -----------------------
1568 1536
1569 Module for Turtle Beach MultiSound Classic, T 1537 Module for Turtle Beach MultiSound Classic, Tahiti or Monterey
1570 soundcards. 1538 soundcards.
1571 1539
1572 io 1540 io
1573 Port # for msnd-classic card 1541 Port # for msnd-classic card
1574 irq 1542 irq
1575 IRQ # for msnd-classic card 1543 IRQ # for msnd-classic card
1576 mem 1544 mem
1577 Memory address (0xb0000, 0xc8000, 0xd0000 1545 Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000)
1578 write_ndelay 1546 write_ndelay
1579 enable write ndelay (default = 1) 1547 enable write ndelay (default = 1)
1580 calibrate_signal 1548 calibrate_signal
1581 calibrate signal (default = 0) 1549 calibrate signal (default = 0)
1582 isapnp 1550 isapnp
1583 ISA PnP detection - 0 = disable, 1 = enab 1551 ISA PnP detection - 0 = disable, 1 = enable (default)
1584 digital 1552 digital
1585 Digital daughterboard present (default = 1553 Digital daughterboard present (default = 0)
1586 cfg 1554 cfg
1587 Config port (0x250, 0x260 or 0x270) defau 1555 Config port (0x250, 0x260 or 0x270) default = PnP
1588 reset 1556 reset
1589 Reset all devices 1557 Reset all devices
1590 mpu_io 1558 mpu_io
1591 MPU401 I/O port 1559 MPU401 I/O port
1592 mpu_irq 1560 mpu_irq
1593 MPU401 irq# 1561 MPU401 irq#
1594 ide_io0 1562 ide_io0
1595 IDE port #0 1563 IDE port #0
1596 ide_io1 1564 ide_io1
1597 IDE port #1 1565 IDE port #1
1598 ide_irq 1566 ide_irq
1599 IDE irq# 1567 IDE irq#
1600 joystick_io 1568 joystick_io
1601 Joystick I/O port 1569 Joystick I/O port
1602 1570
1603 The driver requires firmware files ``turtlebe 1571 The driver requires firmware files ``turtlebeach/msndinit.bin`` and
1604 ``turtlebeach/msndperm.bin`` in the proper fi 1572 ``turtlebeach/msndperm.bin`` in the proper firmware directory.
1605 1573
1606 See Documentation/sound/cards/multisound.sh f 1574 See Documentation/sound/cards/multisound.sh for important information
1607 about this driver. Note that it has been dis 1575 about this driver. Note that it has been discontinued, but the
1608 Voyetra Turtle Beach knowledge base entry for 1576 Voyetra Turtle Beach knowledge base entry for it is still available
1609 at 1577 at
1610 https://www.turtlebeach.com 1578 https://www.turtlebeach.com
1611 1579
1612 Module snd-msnd-pinnacle 1580 Module snd-msnd-pinnacle
1613 ------------------------ 1581 ------------------------
1614 1582
1615 Module for Turtle Beach MultiSound Pinnacle/F 1583 Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards.
1616 1584
1617 io 1585 io
1618 Port # for pinnacle/fiji card 1586 Port # for pinnacle/fiji card
1619 irq 1587 irq
1620 IRQ # for pinnalce/fiji card 1588 IRQ # for pinnalce/fiji card
1621 mem 1589 mem
1622 Memory address (0xb0000, 0xc8000, 0xd0000 1590 Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000)
1623 write_ndelay 1591 write_ndelay
1624 enable write ndelay (default = 1) 1592 enable write ndelay (default = 1)
1625 calibrate_signal 1593 calibrate_signal
1626 calibrate signal (default = 0) 1594 calibrate signal (default = 0)
1627 isapnp 1595 isapnp
1628 ISA PnP detection - 0 = disable, 1 = enab 1596 ISA PnP detection - 0 = disable, 1 = enable (default)
1629 1597
1630 The driver requires firmware files ``turtlebe 1598 The driver requires firmware files ``turtlebeach/pndspini.bin`` and
1631 ``turtlebeach/pndsperm.bin`` in the proper fi 1599 ``turtlebeach/pndsperm.bin`` in the proper firmware directory.
1632 1600
1633 Module snd-mtpav 1601 Module snd-mtpav
1634 ---------------- 1602 ----------------
1635 1603
1636 Module for MOTU MidiTimePiece AV multiport MI 1604 Module for MOTU MidiTimePiece AV multiport MIDI (on the parallel
1637 port). 1605 port).
1638 1606
1639 port 1607 port
1640 I/O port # for MTPAV (0x378,0x278, defaul 1608 I/O port # for MTPAV (0x378,0x278, default=0x378)
1641 irq 1609 irq
1642 IRQ # for MTPAV (7,5, default=7) 1610 IRQ # for MTPAV (7,5, default=7)
1643 hwports 1611 hwports
1644 number of supported hardware ports, defau 1612 number of supported hardware ports, default=8.
1645 1613
1646 Module supports only 1 card. This module has 1614 Module supports only 1 card. This module has no enable option.
1647 1615
1648 Module snd-mts64 1616 Module snd-mts64
1649 ---------------- 1617 ----------------
1650 1618
1651 Module for Ego Systems (ESI) Miditerminal 414 1619 Module for Ego Systems (ESI) Miditerminal 4140
1652 1620
1653 This module supports multiple devices. 1621 This module supports multiple devices.
1654 Requires parport (``CONFIG_PARPORT``). 1622 Requires parport (``CONFIG_PARPORT``).
1655 1623
1656 Module snd-nm256 1624 Module snd-nm256
1657 ---------------- 1625 ----------------
1658 1626
1659 Module for NeoMagic NM256AV/ZX chips 1627 Module for NeoMagic NM256AV/ZX chips
1660 1628
1661 playback_bufsize 1629 playback_bufsize
1662 max playback frame size in kB (4-128kB) 1630 max playback frame size in kB (4-128kB)
1663 capture_bufsize 1631 capture_bufsize
1664 max capture frame size in kB (4-128kB) 1632 max capture frame size in kB (4-128kB)
1665 force_ac97 1633 force_ac97
1666 0 or 1 (disabled by default) 1634 0 or 1 (disabled by default)
1667 buffer_top 1635 buffer_top
1668 specify buffer top address 1636 specify buffer top address
1669 use_cache 1637 use_cache
1670 0 or 1 (disabled by default) 1638 0 or 1 (disabled by default)
1671 vaio_hack 1639 vaio_hack
1672 alias buffer_top=0x25a800 1640 alias buffer_top=0x25a800
1673 reset_workaround 1641 reset_workaround
1674 enable AC97 RESET workaround for some lap 1642 enable AC97 RESET workaround for some laptops
1675 reset_workaround2 1643 reset_workaround2
1676 enable extended AC97 RESET workaround for 1644 enable extended AC97 RESET workaround for some other laptops
1677 1645
1678 This module supports one chip and autoprobe. 1646 This module supports one chip and autoprobe.
1679 1647
1680 The power-management is supported. 1648 The power-management is supported.
1681 1649
1682 Note: on some notebooks the buffer address ca 1650 Note: on some notebooks the buffer address cannot be detected
1683 automatically, or causes hang-up during initi 1651 automatically, or causes hang-up during initialization.
1684 In such a case, specify the buffer top addres 1652 In such a case, specify the buffer top address explicitly via
1685 the buffer_top option. 1653 the buffer_top option.
1686 For example, 1654 For example,
1687 Sony F250: buffer_top=0x25a800 1655 Sony F250: buffer_top=0x25a800
1688 Sony F270: buffer_top=0x272800 1656 Sony F270: buffer_top=0x272800
1689 The driver supports only ac97 codec. It's po 1657 The driver supports only ac97 codec. It's possible to force
1690 to initialize/use ac97 although it's not dete 1658 to initialize/use ac97 although it's not detected. In such a
1691 case, use ``force_ac97=1`` option - but *NO* 1659 case, use ``force_ac97=1`` option - but *NO* guarantee whether it
1692 works! 1660 works!
1693 1661
1694 Note: The NM256 chip can be linked internally 1662 Note: The NM256 chip can be linked internally with non-AC97
1695 codecs. This driver supports only the AC97 c 1663 codecs. This driver supports only the AC97 codec, and won't work
1696 with machines with other (most likely CS423x 1664 with machines with other (most likely CS423x or OPL3SAx) chips,
1697 even though the device is detected in lspci. 1665 even though the device is detected in lspci. In such a case, try
1698 other drivers, e.g. snd-cs4232 or snd-opl3sa2 1666 other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP
1699 but some doesn't have ISA PnP. You'll need t 1667 but some doesn't have ISA PnP. You'll need to specify ``isapnp=0``
1700 and proper hardware parameters in the case wi 1668 and proper hardware parameters in the case without ISA PnP.
1701 1669
1702 Note: some laptops need a workaround for AC97 1670 Note: some laptops need a workaround for AC97 RESET. For the
1703 known hardware like Dell Latitude LS and Sony 1671 known hardware like Dell Latitude LS and Sony PCG-F305, this
1704 workaround is enabled automatically. For oth 1672 workaround is enabled automatically. For other laptops with a
1705 hard freeze, you can try ``reset_workaround=1 1673 hard freeze, you can try ``reset_workaround=1`` option.
1706 1674
1707 Note: Dell Latitude CSx laptops have another 1675 Note: Dell Latitude CSx laptops have another problem regarding
1708 AC97 RESET. On these laptops, reset_workarou 1676 AC97 RESET. On these laptops, reset_workaround2 option is
1709 turned on as default. This option is worth t 1677 turned on as default. This option is worth to try if the
1710 previous reset_workaround option doesn't help 1678 previous reset_workaround option doesn't help.
1711 1679
1712 Note: This driver is really crappy. It's a p 1680 Note: This driver is really crappy. It's a porting from the
1713 OSS driver, which is a result of black-magic 1681 OSS driver, which is a result of black-magic reverse engineering.
1714 The detection of codec will fail if the drive 1682 The detection of codec will fail if the driver is loaded *after*
1715 X-server as described above. You might be ab 1683 X-server as described above. You might be able to force to load
1716 the module, but it may result in hang-up. H 1684 the module, but it may result in hang-up. Hence, make sure that
1717 you load this module *before* X if you encoun 1685 you load this module *before* X if you encounter this kind of
1718 problem. 1686 problem.
1719 1687
1720 Module snd-opl3sa2 1688 Module snd-opl3sa2
1721 ------------------ 1689 ------------------
1722 1690
1723 Module for Yamaha OPL3-SA2/SA3 sound cards. 1691 Module for Yamaha OPL3-SA2/SA3 sound cards.
1724 1692
1725 isapnp 1693 isapnp
1726 ISA PnP detection - 0 = disable, 1 = enab 1694 ISA PnP detection - 0 = disable, 1 = enable (default)
1727 1695
1728 with ``isapnp=0``, the following options are 1696 with ``isapnp=0``, the following options are available:
1729 1697
1730 port 1698 port
1731 control port # for OPL3-SA chip (0x370) 1699 control port # for OPL3-SA chip (0x370)
1732 sb_port 1700 sb_port
1733 SB port # for OPL3-SA chip (0x220,0x240) 1701 SB port # for OPL3-SA chip (0x220,0x240)
1734 wss_port 1702 wss_port
1735 WSS port # for OPL3-SA chip (0x530,0xe80, 1703 WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604)
1736 midi_port 1704 midi_port
1737 port # for MPU-401 UART (0x300,0x330), -1 1705 port # for MPU-401 UART (0x300,0x330), -1 = disable
1738 fm_port 1706 fm_port
1739 FM port # for OPL3-SA chip (0x388), -1 = 1707 FM port # for OPL3-SA chip (0x388), -1 = disable
1740 irq 1708 irq
1741 IRQ # for OPL3-SA chip (5,7,9,10) 1709 IRQ # for OPL3-SA chip (5,7,9,10)
1742 dma1 1710 dma1
1743 first DMA # for Yamaha OPL3-SA chip (0,1, 1711 first DMA # for Yamaha OPL3-SA chip (0,1,3)
1744 dma2 1712 dma2
1745 second DMA # for Yamaha OPL3-SA chip (0,1 1713 second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
1746 1714
1747 This module supports multiple cards and ISA P 1715 This module supports multiple cards and ISA PnP. It does not support
1748 autoprobe (if ISA PnP is not used) thus all p 1716 autoprobe (if ISA PnP is not used) thus all ports must be specified!!!
1749 1717
1750 The power-management is supported. 1718 The power-management is supported.
1751 1719
1752 Module snd-opti92x-ad1848 1720 Module snd-opti92x-ad1848
1753 ------------------------- 1721 -------------------------
1754 1722
1755 Module for sound cards based on OPTi 82c92x a 1723 Module for sound cards based on OPTi 82c92x and Analog Devices AD1848 chips.
1756 Module works with OAK Mozart cards as well. 1724 Module works with OAK Mozart cards as well.
1757 1725
1758 isapnp 1726 isapnp
1759 ISA PnP detection - 0 = disable, 1 = enab 1727 ISA PnP detection - 0 = disable, 1 = enable (default)
1760 1728
1761 with ``isapnp=0``, the following options are 1729 with ``isapnp=0``, the following options are available:
1762 1730
1763 port 1731 port
1764 port # for WSS chip (0x530,0xe80,0xf40,0x 1732 port # for WSS chip (0x530,0xe80,0xf40,0x604)
1765 mpu_port 1733 mpu_port
1766 port # for MPU-401 UART (0x300,0x310,0x32 1734 port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1767 fm_port 1735 fm_port
1768 port # for OPL3 device (0x388) 1736 port # for OPL3 device (0x388)
1769 irq 1737 irq
1770 IRQ # for WSS chip (5,7,9,10,11) 1738 IRQ # for WSS chip (5,7,9,10,11)
1771 mpu_irq 1739 mpu_irq
1772 IRQ # for MPU-401 UART (5,7,9,10) 1740 IRQ # for MPU-401 UART (5,7,9,10)
1773 dma1 1741 dma1
1774 first DMA # for WSS chip (0,1,3) 1742 first DMA # for WSS chip (0,1,3)
1775 1743
1776 This module supports only one card, autoprobe 1744 This module supports only one card, autoprobe and PnP.
1777 1745
1778 Module snd-opti92x-cs4231 1746 Module snd-opti92x-cs4231
1779 ------------------------- 1747 -------------------------
1780 1748
1781 Module for sound cards based on OPTi 82c92x a 1749 Module for sound cards based on OPTi 82c92x and Crystal CS4231 chips.
1782 1750
1783 isapnp 1751 isapnp
1784 ISA PnP detection - 0 = disable, 1 = enab 1752 ISA PnP detection - 0 = disable, 1 = enable (default)
1785 1753
1786 with ``isapnp=0``, the following options are 1754 with ``isapnp=0``, the following options are available:
1787 1755
1788 port 1756 port
1789 port # for WSS chip (0x530,0xe80,0xf40,0x 1757 port # for WSS chip (0x530,0xe80,0xf40,0x604)
1790 mpu_port 1758 mpu_port
1791 port # for MPU-401 UART (0x300,0x310,0x32 1759 port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1792 fm_port 1760 fm_port
1793 port # for OPL3 device (0x388) 1761 port # for OPL3 device (0x388)
1794 irq 1762 irq
1795 IRQ # for WSS chip (5,7,9,10,11) 1763 IRQ # for WSS chip (5,7,9,10,11)
1796 mpu_irq 1764 mpu_irq
1797 IRQ # for MPU-401 UART (5,7,9,10) 1765 IRQ # for MPU-401 UART (5,7,9,10)
1798 dma1 1766 dma1
1799 first DMA # for WSS chip (0,1,3) 1767 first DMA # for WSS chip (0,1,3)
1800 dma2 1768 dma2
1801 second DMA # for WSS chip (0,1,3) 1769 second DMA # for WSS chip (0,1,3)
1802 1770
1803 This module supports only one card, autoprobe 1771 This module supports only one card, autoprobe and PnP.
1804 1772
1805 Module snd-opti93x 1773 Module snd-opti93x
1806 ------------------ 1774 ------------------
1807 1775
1808 Module for sound cards based on OPTi 82c93x c 1776 Module for sound cards based on OPTi 82c93x chips.
1809 1777
1810 isapnp 1778 isapnp
1811 ISA PnP detection - 0 = disable, 1 = enab 1779 ISA PnP detection - 0 = disable, 1 = enable (default)
1812 1780
1813 with ``isapnp=0``, the following options are 1781 with ``isapnp=0``, the following options are available:
1814 1782
1815 port 1783 port
1816 port # for WSS chip (0x530,0xe80,0xf40,0x 1784 port # for WSS chip (0x530,0xe80,0xf40,0x604)
1817 mpu_port 1785 mpu_port
1818 port # for MPU-401 UART (0x300,0x310,0x32 1786 port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1819 fm_port 1787 fm_port
1820 port # for OPL3 device (0x388) 1788 port # for OPL3 device (0x388)
1821 irq 1789 irq
1822 IRQ # for WSS chip (5,7,9,10,11) 1790 IRQ # for WSS chip (5,7,9,10,11)
1823 mpu_irq 1791 mpu_irq
1824 IRQ # for MPU-401 UART (5,7,9,10) 1792 IRQ # for MPU-401 UART (5,7,9,10)
1825 dma1 1793 dma1
1826 first DMA # for WSS chip (0,1,3) 1794 first DMA # for WSS chip (0,1,3)
1827 dma2 1795 dma2
1828 second DMA # for WSS chip (0,1,3) 1796 second DMA # for WSS chip (0,1,3)
1829 1797
1830 This module supports only one card, autoprobe 1798 This module supports only one card, autoprobe and PnP.
1831 1799
1832 Module snd-oxygen 1800 Module snd-oxygen
1833 ----------------- 1801 -----------------
1834 1802
1835 Module for sound cards based on the C-Media C 1803 Module for sound cards based on the C-Media CMI8786/8787/8788 chip:
1836 1804
1837 * Asound A-8788 1805 * Asound A-8788
1838 * Asus Xonar DG/DGX 1806 * Asus Xonar DG/DGX
1839 * AuzenTech X-Meridian 1807 * AuzenTech X-Meridian
1840 * AuzenTech X-Meridian 2G 1808 * AuzenTech X-Meridian 2G
1841 * Bgears b-Enspirer 1809 * Bgears b-Enspirer
1842 * Club3D Theatron DTS 1810 * Club3D Theatron DTS
1843 * HT-Omega Claro (plus) 1811 * HT-Omega Claro (plus)
1844 * HT-Omega Claro halo (XT) 1812 * HT-Omega Claro halo (XT)
1845 * Kuroutoshikou CMI8787-HG2PCI 1813 * Kuroutoshikou CMI8787-HG2PCI
1846 * Razer Barracuda AC-1 1814 * Razer Barracuda AC-1
1847 * Sondigo Inferno 1815 * Sondigo Inferno
1848 * TempoTec HiFier Fantasia 1816 * TempoTec HiFier Fantasia
1849 * TempoTec HiFier Serenade 1817 * TempoTec HiFier Serenade
1850 1818
1851 This module supports autoprobe and multiple c 1819 This module supports autoprobe and multiple cards.
1852 1820
1853 Module snd-pcsp 1821 Module snd-pcsp
1854 --------------- 1822 ---------------
1855 1823
1856 Module for internal PC-Speaker. 1824 Module for internal PC-Speaker.
1857 1825
1858 nopcm 1826 nopcm
1859 Disable PC-Speaker PCM sound. Only beeps 1827 Disable PC-Speaker PCM sound. Only beeps remain.
1860 nforce_wa 1828 nforce_wa
1861 enable NForce chipset workaround. Expect 1829 enable NForce chipset workaround. Expect bad sound.
1862 1830
1863 This module supports system beeps, some kind 1831 This module supports system beeps, some kind of PCM playback and
1864 even a few mixer controls. 1832 even a few mixer controls.
1865 1833
1866 Module snd-pcxhr 1834 Module snd-pcxhr
1867 ---------------- 1835 ----------------
1868 1836
1869 Module for Digigram PCXHR boards 1837 Module for Digigram PCXHR boards
1870 1838
1871 This module supports multiple cards. 1839 This module supports multiple cards.
1872 1840
1873 Module snd-portman2x4 1841 Module snd-portman2x4
1874 --------------------- 1842 ---------------------
1875 1843
1876 Module for Midiman Portman 2x4 parallel port 1844 Module for Midiman Portman 2x4 parallel port MIDI interface
1877 1845
1878 This module supports multiple cards. 1846 This module supports multiple cards.
1879 1847
1880 Module snd-powermac (on ppc only) 1848 Module snd-powermac (on ppc only)
1881 --------------------------------- 1849 ---------------------------------
1882 1850
1883 Module for PowerMac, iMac and iBook on-board 1851 Module for PowerMac, iMac and iBook on-board soundchips
1884 1852
1885 enable_beep 1853 enable_beep
1886 enable beep using PCM (enabled as default 1854 enable beep using PCM (enabled as default)
1887 1855
1888 Module supports autoprobe a chip. 1856 Module supports autoprobe a chip.
1889 1857
1890 Note: the driver may have problems regarding 1858 Note: the driver may have problems regarding endianness.
1891 1859
1892 The power-management is supported. 1860 The power-management is supported.
1893 1861
1894 Module snd-pxa2xx-ac97 (on arm only) 1862 Module snd-pxa2xx-ac97 (on arm only)
1895 ------------------------------------ 1863 ------------------------------------
1896 1864
1897 Module for AC97 driver for the Intel PXA2xx c 1865 Module for AC97 driver for the Intel PXA2xx chip
1898 1866
1899 For ARM architecture only. 1867 For ARM architecture only.
1900 1868
1901 The power-management is supported. 1869 The power-management is supported.
1902 1870
1903 Module snd-riptide 1871 Module snd-riptide
1904 ------------------ 1872 ------------------
1905 1873
1906 Module for Conexant Riptide chip 1874 Module for Conexant Riptide chip
1907 1875
1908 joystick_port 1876 joystick_port
1909 Joystick port # (default: 0x200) 1877 Joystick port # (default: 0x200)
1910 mpu_port 1878 mpu_port
1911 MPU401 port # (default: 0x330) 1879 MPU401 port # (default: 0x330)
1912 opl3_port 1880 opl3_port
1913 OPL3 port # (default: 0x388) 1881 OPL3 port # (default: 0x388)
1914 1882
1915 This module supports multiple cards. 1883 This module supports multiple cards.
1916 The driver requires the firmware loader suppo 1884 The driver requires the firmware loader support on kernel.
1917 You need to install the firmware file ``ripti 1885 You need to install the firmware file ``riptide.hex`` to the standard
1918 firmware path (e.g. /lib/firmware). 1886 firmware path (e.g. /lib/firmware).
1919 1887
1920 Module snd-rme32 1888 Module snd-rme32
1921 ---------------- 1889 ----------------
1922 1890
1923 Module for RME Digi32, Digi32 Pro and Digi32/ 1891 Module for RME Digi32, Digi32 Pro and Digi32/8 (Sek'd Prodif32,
1924 Prodif96 and Prodif Gold) sound cards. 1892 Prodif96 and Prodif Gold) sound cards.
1925 1893
1926 This module supports multiple cards. 1894 This module supports multiple cards.
1927 1895
1928 Module snd-rme96 1896 Module snd-rme96
1929 ---------------- 1897 ----------------
1930 1898
1931 Module for RME Digi96, Digi96/8 and Digi96/8 1899 Module for RME Digi96, Digi96/8 and Digi96/8 PRO/PAD/PST sound cards.
1932 1900
1933 This module supports multiple cards. 1901 This module supports multiple cards.
1934 1902
1935 Module snd-rme9652 1903 Module snd-rme9652
1936 ------------------ 1904 ------------------
1937 1905
1938 Module for RME Digi9652 (Hammerfall, Hammerfa 1906 Module for RME Digi9652 (Hammerfall, Hammerfall-Light) sound cards.
1939 1907
1940 precise_ptr 1908 precise_ptr
1941 Enable precise pointer (doesn't work reli 1909 Enable precise pointer (doesn't work reliably). (default = 0)
1942 1910
1943 This module supports multiple cards. 1911 This module supports multiple cards.
1944 1912
1945 Note: snd-page-alloc module does the job whic 1913 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1946 module did formerly. It will allocate the bu 1914 module did formerly. It will allocate the buffers in advance
1947 when any RME9652 cards are found. To make th 1915 when any RME9652 cards are found. To make the buffer
1948 allocation sure, load snd-page-alloc module i 1916 allocation sure, load snd-page-alloc module in the early
1949 stage of boot sequence. See `Early Buffer Al 1917 stage of boot sequence. See `Early Buffer Allocation`_
1950 section. 1918 section.
1951 1919
1952 Module snd-sa11xx-uda1341 (on arm only) 1920 Module snd-sa11xx-uda1341 (on arm only)
1953 --------------------------------------- 1921 ---------------------------------------
1954 1922
1955 Module for Philips UDA1341TS on Compaq iPAQ H 1923 Module for Philips UDA1341TS on Compaq iPAQ H3600 sound card.
1956 1924
1957 Module supports only one card. 1925 Module supports only one card.
1958 Module has no enable and index options. 1926 Module has no enable and index options.
1959 1927
1960 The power-management is supported. 1928 The power-management is supported.
1961 1929
1962 Module snd-sb8 1930 Module snd-sb8
1963 -------------- 1931 --------------
1964 1932
1965 Module for 8-bit SoundBlaster cards: SoundBla 1933 Module for 8-bit SoundBlaster cards: SoundBlaster 1.0, SoundBlaster 2.0,
1966 SoundBlaster Pro 1934 SoundBlaster Pro
1967 1935
1968 port 1936 port
1969 port # for SB DSP chip (0x220,0x240,0x260 1937 port # for SB DSP chip (0x220,0x240,0x260)
1970 irq 1938 irq
1971 IRQ # for SB DSP chip (5,7,9,10) 1939 IRQ # for SB DSP chip (5,7,9,10)
1972 dma8 1940 dma8
1973 DMA # for SB DSP chip (1,3) 1941 DMA # for SB DSP chip (1,3)
1974 1942
1975 This module supports multiple cards and autop 1943 This module supports multiple cards and autoprobe.
1976 1944
1977 The power-management is supported. 1945 The power-management is supported.
1978 1946
1979 Module snd-sb16 and snd-sbawe 1947 Module snd-sb16 and snd-sbawe
1980 ----------------------------- 1948 -----------------------------
1981 1949
1982 Module for 16-bit SoundBlaster cards: SoundBl 1950 Module for 16-bit SoundBlaster cards: SoundBlaster 16 (PnP),
1983 SoundBlaster AWE 32 (PnP), SoundBlaster AWE 6 1951 SoundBlaster AWE 32 (PnP), SoundBlaster AWE 64 PnP
1984 1952
1985 mic_agc 1953 mic_agc
1986 Mic Auto-Gain-Control - 0 = disable, 1 = 1954 Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
1987 csp 1955 csp
1988 ASP/CSP chip support - 0 = disable (defau 1956 ASP/CSP chip support - 0 = disable (default), 1 = enable
1989 isapnp 1957 isapnp
1990 ISA PnP detection - 0 = disable, 1 = enab 1958 ISA PnP detection - 0 = disable, 1 = enable (default)
1991 1959
1992 with isapnp=0, the following options are avai 1960 with isapnp=0, the following options are available:
1993 1961
1994 port 1962 port
1995 port # for SB DSP 4.x chip (0x220,0x240,0 1963 port # for SB DSP 4.x chip (0x220,0x240,0x260)
1996 mpu_port 1964 mpu_port
1997 port # for MPU-401 UART (0x300,0x330), -1 1965 port # for MPU-401 UART (0x300,0x330), -1 = disable
1998 awe_port 1966 awe_port
1999 base port # for EMU8000 synthesizer (0x62 1967 base port # for EMU8000 synthesizer (0x620,0x640,0x660) (snd-sbawe
2000 module only) 1968 module only)
2001 irq 1969 irq
2002 IRQ # for SB DSP 4.x chip (5,7,9,10) 1970 IRQ # for SB DSP 4.x chip (5,7,9,10)
2003 dma8 1971 dma8
2004 8-bit DMA # for SB DSP 4.x chip (0,1,3) 1972 8-bit DMA # for SB DSP 4.x chip (0,1,3)
2005 dma16 1973 dma16
2006 16-bit DMA # for SB DSP 4.x chip (5,6,7) 1974 16-bit DMA # for SB DSP 4.x chip (5,6,7)
2007 1975
2008 This module supports multiple cards, autoprob 1976 This module supports multiple cards, autoprobe and ISA PnP.
2009 1977
2010 Note: To use Vibra16X cards in 16-bit half du 1978 Note: To use Vibra16X cards in 16-bit half duplex mode, you must
2011 disable 16bit DMA with dma16 = -1 module para 1979 disable 16bit DMA with dma16 = -1 module parameter.
2012 Also, all Sound Blaster 16 type cards can ope 1980 Also, all Sound Blaster 16 type cards can operate in 16-bit
2013 half duplex mode through 8-bit DMA channel by 1981 half duplex mode through 8-bit DMA channel by disabling their
2014 16-bit DMA channel. 1982 16-bit DMA channel.
2015 1983
2016 The power-management is supported. 1984 The power-management is supported.
2017 1985
2018 Module snd-sc6000 1986 Module snd-sc6000
2019 ----------------- 1987 -----------------
2020 1988
2021 Module for Gallant SC-6000 soundcard and late 1989 Module for Gallant SC-6000 soundcard and later models: SC-6600 and
2022 SC-7000. 1990 SC-7000.
2023 1991
2024 port 1992 port
2025 Port # (0x220 or 0x240) 1993 Port # (0x220 or 0x240)
2026 mss_port 1994 mss_port
2027 MSS Port # (0x530 or 0xe80) 1995 MSS Port # (0x530 or 0xe80)
2028 irq 1996 irq
2029 IRQ # (5,7,9,10,11) 1997 IRQ # (5,7,9,10,11)
2030 mpu_irq 1998 mpu_irq
2031 MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 1999 MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq
2032 dma 2000 dma
2033 DMA # (1,3,0) 2001 DMA # (1,3,0)
2034 joystick 2002 joystick
2035 Enable gameport - 0 = disable (default), 2003 Enable gameport - 0 = disable (default), 1 = enable
2036 2004
2037 This module supports multiple cards. 2005 This module supports multiple cards.
2038 2006
2039 This card is also known as Audio Excel DSP 16 2007 This card is also known as Audio Excel DSP 16 or Zoltrix AV302.
2040 2008
2041 Module snd-sscape 2009 Module snd-sscape
2042 ----------------- 2010 -----------------
2043 2011
2044 Module for ENSONIQ SoundScape cards. 2012 Module for ENSONIQ SoundScape cards.
2045 2013
2046 port 2014 port
2047 Port # (PnP setup) 2015 Port # (PnP setup)
2048 wss_port 2016 wss_port
2049 WSS Port # (PnP setup) 2017 WSS Port # (PnP setup)
2050 irq 2018 irq
2051 IRQ # (PnP setup) 2019 IRQ # (PnP setup)
2052 mpu_irq 2020 mpu_irq
2053 MPU-401 IRQ # (PnP setup) 2021 MPU-401 IRQ # (PnP setup)
2054 dma 2022 dma
2055 DMA # (PnP setup) 2023 DMA # (PnP setup)
2056 dma2 2024 dma2
2057 2nd DMA # (PnP setup, -1 to disable) 2025 2nd DMA # (PnP setup, -1 to disable)
2058 joystick 2026 joystick
2059 Enable gameport - 0 = disable (default), 2027 Enable gameport - 0 = disable (default), 1 = enable
2060 2028
2061 This module supports multiple cards. 2029 This module supports multiple cards.
2062 2030
2063 The driver requires the firmware loader suppo 2031 The driver requires the firmware loader support on kernel.
2064 2032
2065 Module snd-sun-amd7930 (on sparc only) 2033 Module snd-sun-amd7930 (on sparc only)
2066 -------------------------------------- 2034 --------------------------------------
2067 2035
2068 Module for AMD7930 sound chips found on Sparc 2036 Module for AMD7930 sound chips found on Sparcs.
2069 2037
2070 This module supports multiple cards. 2038 This module supports multiple cards.
2071 2039
2072 Module snd-sun-cs4231 (on sparc only) 2040 Module snd-sun-cs4231 (on sparc only)
2073 ------------------------------------- 2041 -------------------------------------
2074 2042
2075 Module for CS4231 sound chips found on Sparcs 2043 Module for CS4231 sound chips found on Sparcs.
2076 2044
2077 This module supports multiple cards. 2045 This module supports multiple cards.
2078 2046
2079 Module snd-sun-dbri (on sparc only) 2047 Module snd-sun-dbri (on sparc only)
2080 ----------------------------------- 2048 -----------------------------------
2081 2049
2082 Module for DBRI sound chips found on Sparcs. 2050 Module for DBRI sound chips found on Sparcs.
2083 2051
2084 This module supports multiple cards. 2052 This module supports multiple cards.
2085 2053
2086 Module snd-wavefront 2054 Module snd-wavefront
2087 -------------------- 2055 --------------------
2088 2056
2089 Module for Turtle Beach Maui, Tropez and Trop 2057 Module for Turtle Beach Maui, Tropez and Tropez+ sound cards.
2090 2058
2091 use_cs4232_midi 2059 use_cs4232_midi
2092 Use CS4232 MPU-401 interface 2060 Use CS4232 MPU-401 interface
2093 (inaccessibly located inside your compute 2061 (inaccessibly located inside your computer)
2094 isapnp 2062 isapnp
2095 ISA PnP detection - 0 = disable, 1 = enab 2063 ISA PnP detection - 0 = disable, 1 = enable (default)
2096 2064
2097 with isapnp=0, the following options are avai 2065 with isapnp=0, the following options are available:
2098 2066
2099 cs4232_pcm_port 2067 cs4232_pcm_port
2100 Port # for CS4232 PCM interface. 2068 Port # for CS4232 PCM interface.
2101 cs4232_pcm_irq 2069 cs4232_pcm_irq
2102 IRQ # for CS4232 PCM interface (5,7,9,11, 2070 IRQ # for CS4232 PCM interface (5,7,9,11,12,15).
2103 cs4232_mpu_port 2071 cs4232_mpu_port
2104 Port # for CS4232 MPU-401 interface. 2072 Port # for CS4232 MPU-401 interface.
2105 cs4232_mpu_irq 2073 cs4232_mpu_irq
2106 IRQ # for CS4232 MPU-401 interface (9,11, 2074 IRQ # for CS4232 MPU-401 interface (9,11,12,15).
2107 ics2115_port 2075 ics2115_port
2108 Port # for ICS2115 2076 Port # for ICS2115
2109 ics2115_irq 2077 ics2115_irq
2110 IRQ # for ICS2115 2078 IRQ # for ICS2115
2111 fm_port 2079 fm_port
2112 FM OPL-3 Port # 2080 FM OPL-3 Port #
2113 dma1 2081 dma1
2114 DMA1 # for CS4232 PCM interface. 2082 DMA1 # for CS4232 PCM interface.
2115 dma2 2083 dma2
2116 DMA2 # for CS4232 PCM interface. 2084 DMA2 # for CS4232 PCM interface.
2117 2085
2118 The below are options for wavefront_synth fea 2086 The below are options for wavefront_synth features:
2119 2087
2120 wf_raw 2088 wf_raw
2121 Assume that we need to boot the OS (defau 2089 Assume that we need to boot the OS (default:no);
2122 If yes, then during driver loading, the s 2090 If yes, then during driver loading, the state of the board is
2123 ignored, and we reset the board and load 2091 ignored, and we reset the board and load the firmware anyway.
2124 fx_raw 2092 fx_raw
2125 Assume that the FX process needs help (de 2093 Assume that the FX process needs help (default:yes);
2126 If false, we'll leave the FX processor in 2094 If false, we'll leave the FX processor in whatever state it is
2127 when the driver is loaded. The default i 2095 when the driver is loaded. The default is to download the
2128 microprogram and associated coefficients 2096 microprogram and associated coefficients to set it up for
2129 "default" operation, whatever that means. 2097 "default" operation, whatever that means.
2130 debug_default 2098 debug_default
2131 Debug parameters for card initialization 2099 Debug parameters for card initialization
2132 wait_usecs 2100 wait_usecs
2133 How long to wait without sleeping, usecs 2101 How long to wait without sleeping, usecs (default:150);
2134 This magic number seems to give pretty op 2102 This magic number seems to give pretty optimal throughput
2135 based on my limited experimentation. 2103 based on my limited experimentation.
2136 If you want to play around with it and fi 2104 If you want to play around with it and find a better value, be
2137 my guest. Remember, the idea is to get a 2105 my guest. Remember, the idea is to get a number that causes us
2138 to just busy wait for as many WaveFront c 2106 to just busy wait for as many WaveFront commands as possible,
2139 without coming up with a number so large 2107 without coming up with a number so large that we hog the whole
2140 CPU. 2108 CPU.
2141 Specifically, with this number, out of ab 2109 Specifically, with this number, out of about 134,000 status
2142 waits, only about 250 result in a sleep. 2110 waits, only about 250 result in a sleep.
2143 sleep_interval 2111 sleep_interval
2144 How long to sleep when waiting for reply 2112 How long to sleep when waiting for reply (default: 100)
2145 sleep_tries 2113 sleep_tries
2146 How many times to try sleeping during a w 2114 How many times to try sleeping during a wait (default: 50)
2147 ospath 2115 ospath
2148 Pathname to processed ICS2115 OS firmware 2116 Pathname to processed ICS2115 OS firmware (default:wavefront.os);
2149 The path name of the ISC2115 OS firmware. 2117 The path name of the ISC2115 OS firmware. In the recent
2150 version, it's handled via firmware loader 2118 version, it's handled via firmware loader framework, so it
2151 must be installed in the proper path, typ 2119 must be installed in the proper path, typically,
2152 /lib/firmware. 2120 /lib/firmware.
2153 reset_time 2121 reset_time
2154 How long to wait for a reset to take effe 2122 How long to wait for a reset to take effect (default:2)
2155 ramcheck_time 2123 ramcheck_time
2156 How many seconds to wait for the RAM test 2124 How many seconds to wait for the RAM test (default:20)
2157 osrun_time 2125 osrun_time
2158 How many seconds to wait for the ICS2115 2126 How many seconds to wait for the ICS2115 OS (default:10)
2159 2127
2160 This module supports multiple cards and ISA P 2128 This module supports multiple cards and ISA PnP.
2161 2129
2162 Note: the firmware file ``wavefront.os`` was 2130 Note: the firmware file ``wavefront.os`` was located in the earlier
2163 version in /etc. Now it's loaded via firmwar 2131 version in /etc. Now it's loaded via firmware loader, and
2164 must be in the proper firmware path, such as 2132 must be in the proper firmware path, such as /lib/firmware.
2165 Copy (or symlink) the file appropriately if y 2133 Copy (or symlink) the file appropriately if you get an error
2166 regarding firmware downloading after upgradin 2134 regarding firmware downloading after upgrading the kernel.
2167 2135
2168 Module snd-sonicvibes 2136 Module snd-sonicvibes
2169 --------------------- 2137 ---------------------
2170 2138
2171 Module for S3 SonicVibes PCI sound cards. 2139 Module for S3 SonicVibes PCI sound cards.
2172 * PINE Schubert 32 PCI 2140 * PINE Schubert 32 PCI
2173 2141
2174 reverb 2142 reverb
2175 Reverb Enable - 1 = enable, 0 = disable ( 2143 Reverb Enable - 1 = enable, 0 = disable (default);
2176 SoundCard must have onboard SRAM for this 2144 SoundCard must have onboard SRAM for this.
2177 mge 2145 mge
2178 Mic Gain Enable - 1 = enable, 0 = disable 2146 Mic Gain Enable - 1 = enable, 0 = disable (default)
2179 2147
2180 This module supports multiple cards and autop 2148 This module supports multiple cards and autoprobe.
2181 2149
2182 Module snd-serial-u16550 2150 Module snd-serial-u16550
2183 ------------------------ 2151 ------------------------
2184 2152
2185 Module for UART16550A serial MIDI ports. 2153 Module for UART16550A serial MIDI ports.
2186 2154
2187 port 2155 port
2188 port # for UART16550A chip 2156 port # for UART16550A chip
2189 irq 2157 irq
2190 IRQ # for UART16550A chip, -1 = poll mode 2158 IRQ # for UART16550A chip, -1 = poll mode
2191 speed 2159 speed
2192 speed in bauds (9600,19200,38400,57600,11 2160 speed in bauds (9600,19200,38400,57600,115200)
2193 38400 = default 2161 38400 = default
2194 base 2162 base
2195 base for divisor in bauds (57600,115200,2 2163 base for divisor in bauds (57600,115200,230400,460800)
2196 115200 = default 2164 115200 = default
2197 outs 2165 outs
2198 number of MIDI ports in a serial port (1- 2166 number of MIDI ports in a serial port (1-4)
2199 1 = default 2167 1 = default
2200 adaptor 2168 adaptor
2201 Type of adaptor. 2169 Type of adaptor.
2202 0 = Soundcanvas, 1 = MS-124T, 2 = MS- 2170 0 = Soundcanvas, 1 = MS-124T, 2 = MS-124W S/A,
2203 3 = MS-124W M/B, 4 = Generic 2171 3 = MS-124W M/B, 4 = Generic
2204 2172
2205 This module supports multiple cards. This mod 2173 This module supports multiple cards. This module does not support autoprobe
2206 thus the main port must be specified!!! Other 2174 thus the main port must be specified!!! Other options are optional.
2207 2175
2208 Module snd-trident 2176 Module snd-trident
2209 ------------------ 2177 ------------------
2210 2178
2211 Module for Trident 4DWave DX/NX sound cards. 2179 Module for Trident 4DWave DX/NX sound cards.
2212 * Best Union Miss Melody 4DWave PCI 2180 * Best Union Miss Melody 4DWave PCI
2213 * HIS 4DWave PCI 2181 * HIS 4DWave PCI
2214 * Warpspeed ONSpeed 4DWave PCI 2182 * Warpspeed ONSpeed 4DWave PCI
2215 * AzTech PCI 64-Q3D 2183 * AzTech PCI 64-Q3D
2216 * Addonics SV 750 2184 * Addonics SV 750
2217 * CHIC True Sound 4Dwave 2185 * CHIC True Sound 4Dwave
2218 * Shark Predator4D-PCI 2186 * Shark Predator4D-PCI
2219 * Jaton SonicWave 4D 2187 * Jaton SonicWave 4D
2220 * SiS SI7018 PCI Audio 2188 * SiS SI7018 PCI Audio
2221 * Hoontech SoundTrack Digital 4DWave NX 2189 * Hoontech SoundTrack Digital 4DWave NX
2222 2190
2223 pcm_channels 2191 pcm_channels
2224 max channels (voices) reserved for PCM 2192 max channels (voices) reserved for PCM
2225 wavetable_size 2193 wavetable_size
2226 max wavetable size in kB (4-?kb) 2194 max wavetable size in kB (4-?kb)
2227 2195
2228 This module supports multiple cards and autop 2196 This module supports multiple cards and autoprobe.
2229 2197
2230 The power-management is supported. 2198 The power-management is supported.
2231 2199
2232 Module snd-ua101 2200 Module snd-ua101
2233 ---------------- 2201 ----------------
2234 2202
2235 Module for the Edirol UA-101/UA-1000 audio/MI 2203 Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
2236 2204
2237 This module supports multiple devices, autopr 2205 This module supports multiple devices, autoprobe and hotplugging.
2238 2206
2239 Module snd-usb-audio 2207 Module snd-usb-audio
2240 -------------------- 2208 --------------------
2241 2209
2242 Module for USB audio and USB MIDI devices. 2210 Module for USB audio and USB MIDI devices.
2243 2211
2244 vid 2212 vid
2245 Vendor ID for the device (optional) 2213 Vendor ID for the device (optional)
2246 pid 2214 pid
2247 Product ID for the device (optional) 2215 Product ID for the device (optional)
2248 nrpacks 2216 nrpacks
2249 Max. number of packets per URB (default: 2217 Max. number of packets per URB (default: 8)
2250 device_setup 2218 device_setup
2251 Device specific magic number (optional); 2219 Device specific magic number (optional);
2252 Influence depends on the device 2220 Influence depends on the device
2253 Default: 0x0000 2221 Default: 0x0000
2254 ignore_ctl_error 2222 ignore_ctl_error
2255 Ignore any USB-controller regarding mixer 2223 Ignore any USB-controller regarding mixer interface (default: no)
2256 autoclock 2224 autoclock
2257 Enable auto-clock selection for UAC2 devi 2225 Enable auto-clock selection for UAC2 devices (default: yes)
2258 quirk_alias 2226 quirk_alias
2259 Quirk alias list, pass strings like ``012 2227 Quirk alias list, pass strings like ``0123abcd:5678beef``, which
2260 applies the existing quirk for the device 2228 applies the existing quirk for the device 5678:beef to a new
2261 device 0123:abcd. 2229 device 0123:abcd.
2262 implicit_fb 2230 implicit_fb
2263 Apply the generic implicit feedback sync 2231 Apply the generic implicit feedback sync mode. When this is set
2264 and the playback stream sync mode is ASYN 2232 and the playback stream sync mode is ASYNC, the driver tries to
2265 tie an adjacent ASYNC capture stream as t 2233 tie an adjacent ASYNC capture stream as the implicit feedback
2266 source. This is equivalent with quirk_fl !! 2234 source.
2267 use_vmalloc 2235 use_vmalloc
2268 Use vmalloc() for allocations of the PCM 2236 Use vmalloc() for allocations of the PCM buffers (default: yes).
2269 For architectures with non-coherent memor 2237 For architectures with non-coherent memory like ARM or MIPS, the
2270 mmap access may give inconsistent results 2238 mmap access may give inconsistent results with vmalloc'ed
2271 buffers. If mmap is used on such archite 2239 buffers. If mmap is used on such architectures, turn off this
2272 option, so that the DMA-coherent buffers 2240 option, so that the DMA-coherent buffers are allocated and used
2273 instead. 2241 instead.
2274 delayed_register 2242 delayed_register
2275 The option is needed for devices that hav 2243 The option is needed for devices that have multiple streams
2276 defined in multiple USB interfaces. The 2244 defined in multiple USB interfaces. The driver may invoke
2277 registrations multiple times (once per in 2245 registrations multiple times (once per interface) and this may
2278 lead to the insufficient device enumerati 2246 lead to the insufficient device enumeration.
2279 This option receives an array of strings, 2247 This option receives an array of strings, and you can pass
2280 ID:INTERFACE like ``0123abcd:4`` for perf 2248 ID:INTERFACE like ``0123abcd:4`` for performing the delayed
2281 registration to the given device. In thi 2249 registration to the given device. In this example, when a USB
2282 device 0123:abcd is probed, the driver wa 2250 device 0123:abcd is probed, the driver waits the registration
2283 until the USB interface 4 gets probed. 2251 until the USB interface 4 gets probed.
2284 The driver prints a message like "Found p 2252 The driver prints a message like "Found post-registration device
2285 assignment: 1234abcd:04" for such a devic 2253 assignment: 1234abcd:04" for such a device, so that user can
2286 notice the need. 2254 notice the need.
2287 quirk_flags <<
2288 Contains the bit flags for various device <<
2289 Applied to the corresponding card index. <<
2290 <<
2291 * bit 0: Skip reading sample rate for <<
2292 * bit 1: Create Media Controller API <<
2293 * bit 2: Allow alignment on audio sub <<
2294 * bit 3: Add length specifier to tran <<
2295 * bit 4: Start playback stream at fir <<
2296 * bit 5: Skip clock selector setup <<
2297 * bit 6: Ignore errors from clock sou <<
2298 * bit 7: Indicates ITF-USB DSD based <<
2299 * bit 8: Add a delay of 20ms at each <<
2300 * bit 9: Add a delay of 1-2ms at each <<
2301 * bit 10: Add a delay of 5-6ms at eac <<
2302 * bit 11: Add a delay of 50ms at each <<
2303 * bit 12: Perform sample rate validat <<
2304 * bit 13: Disable runtime PM autosusp <<
2305 * bit 14: Ignore errors for mixer acc <<
2306 * bit 15: Support generic DSD raw U32 <<
2307 * bit 16: Set up the interface at fir <<
2308 * bit 17: Apply the generic implicit <<
2309 * bit 18: Don't apply implicit feedba <<
2310 2255
2311 This module supports multiple devices, autopr 2256 This module supports multiple devices, autoprobe and hotplugging.
2312 2257
2313 NB: ``nrpacks`` parameter can be modified dyn 2258 NB: ``nrpacks`` parameter can be modified dynamically via sysfs.
2314 Don't put the value over 20. Changing via sy 2259 Don't put the value over 20. Changing via sysfs has no sanity
2315 check. 2260 check.
2316 2261
2317 NB: ``ignore_ctl_error=1`` may help when you 2262 NB: ``ignore_ctl_error=1`` may help when you get an error at accessing
2318 the mixer element such as URB error -22. Thi 2263 the mixer element such as URB error -22. This happens on some
2319 buggy USB device or the controller. This wor !! 2264 buggy USB device or the controller.
2320 the ``quirk_flags`` bit 14, too. <<
2321 2265
2322 NB: ``quirk_alias`` option is provided only f !! 2266 NB: quirk_alias option is provided only for testing / development.
2323 If you want to have a proper support, contact 2267 If you want to have a proper support, contact to upstream for
2324 adding the matching quirk in the driver code 2268 adding the matching quirk in the driver code statically.
2325 Ditto for ``quirk_flags``. If a device is kn <<
2326 workarounds, please report to the upstream. <<
2327 2269
2328 Module snd-usb-caiaq 2270 Module snd-usb-caiaq
2329 -------------------- 2271 --------------------
2330 2272
2331 Module for caiaq UB audio interfaces, 2273 Module for caiaq UB audio interfaces,
2332 2274
2333 * Native Instruments RigKontrol2 2275 * Native Instruments RigKontrol2
2334 * Native Instruments Kore Controller 2276 * Native Instruments Kore Controller
2335 * Native Instruments Audio Kontrol 1 2277 * Native Instruments Audio Kontrol 1
2336 * Native Instruments Audio 8 DJ 2278 * Native Instruments Audio 8 DJ
2337 2279
2338 This module supports multiple devices, autopr 2280 This module supports multiple devices, autoprobe and hotplugging.
2339 2281
2340 Module snd-usb-usx2y 2282 Module snd-usb-usx2y
2341 -------------------- 2283 --------------------
2342 2284
2343 Module for Tascam USB US-122, US-224 and US-4 2285 Module for Tascam USB US-122, US-224 and US-428 devices.
2344 2286
2345 This module supports multiple devices, autopr 2287 This module supports multiple devices, autoprobe and hotplugging.
2346 2288
2347 Note: you need to load the firmware via ``usx 2289 Note: you need to load the firmware via ``usx2yloader`` utility included
2348 in alsa-tools and alsa-firmware packages. 2290 in alsa-tools and alsa-firmware packages.
2349 2291
2350 Module snd-via82xx 2292 Module snd-via82xx
2351 ------------------ 2293 ------------------
2352 2294
2353 Module for AC'97 motherboards based on VIA 82 2295 Module for AC'97 motherboards based on VIA 82C686A/686B, 8233, 8233A,
2354 8233C, 8235, 8237 (south) bridge. 2296 8233C, 8235, 8237 (south) bridge.
2355 2297
2356 mpu_port 2298 mpu_port
2357 0x300,0x310,0x320,0x330, otherwise obtain 2299 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
2358 [VIA686A/686B only] 2300 [VIA686A/686B only]
2359 joystick 2301 joystick
2360 Enable joystick (default off) [VIA686A/68 2302 Enable joystick (default off) [VIA686A/686B only]
2361 ac97_clock 2303 ac97_clock
2362 AC'97 codec clock base (default 48000Hz) 2304 AC'97 codec clock base (default 48000Hz)
2363 dxs_support 2305 dxs_support
2364 support DXS channels, 0 = auto (default), 2306 support DXS channels, 0 = auto (default), 1 = enable, 2 = disable,
2365 3 = 48k only, 4 = no VRA, 5 = enable any 2307 3 = 48k only, 4 = no VRA, 5 = enable any sample rate and different
2366 sample rates on different channels [VIA82 2308 sample rates on different channels [VIA8233/C, 8235, 8237 only]
2367 ac97_quirk 2309 ac97_quirk
2368 AC'97 workaround for strange hardware; 2310 AC'97 workaround for strange hardware;
2369 See `AC97 Quirk Option`_ section below. 2311 See `AC97 Quirk Option`_ section below.
2370 2312
2371 This module supports one chip and autoprobe. 2313 This module supports one chip and autoprobe.
2372 2314
2373 Note: on some SMP motherboards like MSI 694D 2315 Note: on some SMP motherboards like MSI 694D the interrupts might
2374 not be generated properly. In such a case, p 2316 not be generated properly. In such a case, please try to
2375 set the SMP (or MPS) version on BIOS to 1.1 i 2317 set the SMP (or MPS) version on BIOS to 1.1 instead of
2376 default value 1.4. Then the interrupt number 2318 default value 1.4. Then the interrupt number will be
2377 assigned under 15. You might also upgrade you 2319 assigned under 15. You might also upgrade your BIOS.
2378 2320
2379 Note: VIA8233/5/7 (not VIA8233A) can support 2321 Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound)
2380 channels as the first PCM. On these channels 2322 channels as the first PCM. On these channels, up to 4
2381 streams can be played at the same time, and t 2323 streams can be played at the same time, and the controller
2382 can perform sample rate conversion with separ 2324 can perform sample rate conversion with separate rates for
2383 each channel. 2325 each channel.
2384 As default (``dxs_support = 0``), 48k fixed r 2326 As default (``dxs_support = 0``), 48k fixed rate is chosen
2385 except for the known devices since the output 2327 except for the known devices since the output is often
2386 noisy except for 48k on some mother boards du 2328 noisy except for 48k on some mother boards due to the
2387 bug of BIOS. 2329 bug of BIOS.
2388 Please try once ``dxs_support=5`` and if it w 2330 Please try once ``dxs_support=5`` and if it works on other
2389 sample rates (e.g. 44.1kHz of mp3 playback), 2331 sample rates (e.g. 44.1kHz of mp3 playback), please let us
2390 know the PCI subsystem vendor/device id's (ou 2332 know the PCI subsystem vendor/device id's (output of
2391 ``lspci -nv``). 2333 ``lspci -nv``).
2392 If ``dxs_support=5`` does not work, try ``dxs 2334 If ``dxs_support=5`` does not work, try ``dxs_support=4``; if it
2393 doesn't work too, try dxs_support=1. (dxs_su 2335 doesn't work too, try dxs_support=1. (dxs_support=1 is
2394 usually for old motherboards. The correct im 2336 usually for old motherboards. The correct implemented
2395 board should work with 4 or 5.) If it still 2337 board should work with 4 or 5.) If it still doesn't
2396 work and the default setting is ok, ``dxs_sup 2338 work and the default setting is ok, ``dxs_support=3`` is the
2397 right choice. If the default setting doesn't 2339 right choice. If the default setting doesn't work at all,
2398 try ``dxs_support=2`` to disable the DXS chan 2340 try ``dxs_support=2`` to disable the DXS channels.
2399 In any cases, please let us know the result a 2341 In any cases, please let us know the result and the
2400 subsystem vendor/device ids. See `Links and 2342 subsystem vendor/device ids. See `Links and Addresses`_
2401 below. 2343 below.
2402 2344
2403 Note: for the MPU401 on VIA823x, use snd-mpu4 2345 Note: for the MPU401 on VIA823x, use snd-mpu401 driver
2404 additionally. The mpu_port option is for VIA 2346 additionally. The mpu_port option is for VIA686 chips only.
2405 2347
2406 The power-management is supported. 2348 The power-management is supported.
2407 2349
2408 Module snd-via82xx-modem 2350 Module snd-via82xx-modem
2409 ------------------------ 2351 ------------------------
2410 2352
2411 Module for VIA82xx AC97 modem 2353 Module for VIA82xx AC97 modem
2412 2354
2413 ac97_clock 2355 ac97_clock
2414 AC'97 codec clock base (default 48000Hz) 2356 AC'97 codec clock base (default 48000Hz)
2415 2357
2416 This module supports one card and autoprobe. 2358 This module supports one card and autoprobe.
2417 2359
2418 Note: The default index value of this module 2360 Note: The default index value of this module is -2, i.e. the first
2419 slot is excluded. 2361 slot is excluded.
2420 2362
2421 The power-management is supported. 2363 The power-management is supported.
2422 2364
2423 Module snd-virmidi 2365 Module snd-virmidi
2424 ------------------ 2366 ------------------
2425 2367
2426 Module for virtual rawmidi devices. 2368 Module for virtual rawmidi devices.
2427 This module creates virtual rawmidi devices w 2369 This module creates virtual rawmidi devices which communicate
2428 to the corresponding ALSA sequencer ports. 2370 to the corresponding ALSA sequencer ports.
2429 2371
2430 midi_devs 2372 midi_devs
2431 MIDI devices # (1-4, default=4) 2373 MIDI devices # (1-4, default=4)
2432 2374
2433 This module supports multiple cards. 2375 This module supports multiple cards.
2434 2376
2435 Module snd-virtuoso 2377 Module snd-virtuoso
2436 ------------------- 2378 -------------------
2437 2379
2438 Module for sound cards based on the Asus AV66 2380 Module for sound cards based on the Asus AV66/AV100/AV200 chips,
2439 i.e., Xonar D1, DX, D2, D2X, DS, DSX, Essence 2381 i.e., Xonar D1, DX, D2, D2X, DS, DSX, Essence ST (Deluxe),
2440 Essence STX (II), HDAV1.3 (Deluxe), and HDAV1 2382 Essence STX (II), HDAV1.3 (Deluxe), and HDAV1.3 Slim.
2441 2383
2442 This module supports autoprobe and multiple c 2384 This module supports autoprobe and multiple cards.
2443 2385
2444 Module snd-vx222 2386 Module snd-vx222
2445 ---------------- 2387 ----------------
2446 2388
2447 Module for Digigram VX-Pocket VX222, V222 v2 2389 Module for Digigram VX-Pocket VX222, V222 v2 and Mic cards.
2448 2390
2449 mic 2391 mic
2450 Enable Microphone on V222 Mic (NYI) 2392 Enable Microphone on V222 Mic (NYI)
2451 ibl 2393 ibl
2452 Capture IBL size. (default = 0, minimum s 2394 Capture IBL size. (default = 0, minimum size)
2453 2395
2454 This module supports multiple cards. 2396 This module supports multiple cards.
2455 2397
2456 When the driver is compiled as a module and t 2398 When the driver is compiled as a module and the hotplug firmware
2457 is supported, the firmware data is loaded via 2399 is supported, the firmware data is loaded via hotplug automatically.
2458 Install the necessary firmware files in alsa- 2400 Install the necessary firmware files in alsa-firmware package.
2459 When no hotplug fw loader is available, you n 2401 When no hotplug fw loader is available, you need to load the
2460 firmware via vxloader utility in alsa-tools p 2402 firmware via vxloader utility in alsa-tools package. To invoke
2461 vxloader automatically, add the following to 2403 vxloader automatically, add the following to /etc/modprobe.d/alsa.conf
2462 2404
2463 :: 2405 ::
2464 2406
2465 install snd-vx222 /sbin/modprobe --first-ti 2407 install snd-vx222 /sbin/modprobe --first-time -i snd-vx222\
2466 && /usr/bin/vxloader 2408 && /usr/bin/vxloader
2467 2409
2468 (for 2.2/2.4 kernels, add ``post-install /usr 2410 (for 2.2/2.4 kernels, add ``post-install /usr/bin/vxloader`` to
2469 /etc/modules.conf, instead.) 2411 /etc/modules.conf, instead.)
2470 IBL size defines the interrupts period for PC 2412 IBL size defines the interrupts period for PCM. The smaller size
2471 gives smaller latency but leads to more CPU c 2413 gives smaller latency but leads to more CPU consumption, too.
2472 The size is usually aligned to 126. As defau 2414 The size is usually aligned to 126. As default (=0), the smallest
2473 size is chosen. The possible IBL values can 2415 size is chosen. The possible IBL values can be found in
2474 /proc/asound/cardX/vx-status proc file. 2416 /proc/asound/cardX/vx-status proc file.
2475 2417
2476 The power-management is supported. 2418 The power-management is supported.
2477 2419
2478 Module snd-vxpocket 2420 Module snd-vxpocket
2479 ------------------- 2421 -------------------
2480 2422
2481 Module for Digigram VX-Pocket VX2 and 440 PCM 2423 Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
2482 2424
2483 ibl 2425 ibl
2484 Capture IBL size. (default = 0, minimum s 2426 Capture IBL size. (default = 0, minimum size)
2485 2427
2486 This module supports multiple cards. The mod 2428 This module supports multiple cards. The module is compiled only when
2487 PCMCIA is supported on kernel. 2429 PCMCIA is supported on kernel.
2488 2430
2489 With the older 2.6.x kernel, to activate the 2431 With the older 2.6.x kernel, to activate the driver via the card
2490 manager, you'll need to set up /etc/pcmcia/vx 2432 manager, you'll need to set up /etc/pcmcia/vxpocket.conf. See the
2491 sound/pcmcia/vx/vxpocket.c. 2.6.13 or later 2433 sound/pcmcia/vx/vxpocket.c. 2.6.13 or later kernel requires no
2492 longer require a config file. 2434 longer require a config file.
2493 2435
2494 When the driver is compiled as a module and t 2436 When the driver is compiled as a module and the hotplug firmware
2495 is supported, the firmware data is loaded via 2437 is supported, the firmware data is loaded via hotplug automatically.
2496 Install the necessary firmware files in alsa- 2438 Install the necessary firmware files in alsa-firmware package.
2497 When no hotplug fw loader is available, you n 2439 When no hotplug fw loader is available, you need to load the
2498 firmware via vxloader utility in alsa-tools p 2440 firmware via vxloader utility in alsa-tools package.
2499 2441
2500 About capture IBL, see the description of snd 2442 About capture IBL, see the description of snd-vx222 module.
2501 2443
2502 Note: snd-vxp440 driver is merged to snd-vxpo 2444 Note: snd-vxp440 driver is merged to snd-vxpocket driver since
2503 ALSA 1.0.10. 2445 ALSA 1.0.10.
2504 2446
2505 The power-management is supported. 2447 The power-management is supported.
2506 2448
2507 Module snd-ymfpci 2449 Module snd-ymfpci
2508 ----------------- 2450 -----------------
2509 2451
2510 Module for Yamaha PCI chips (YMF72x, YMF74x & 2452 Module for Yamaha PCI chips (YMF72x, YMF74x & YMF75x).
2511 2453
2512 mpu_port 2454 mpu_port
2513 0x300,0x330,0x332,0x334, 0 (disable) by d 2455 0x300,0x330,0x332,0x334, 0 (disable) by default,
2514 1 (auto-detect for YMF744/754 only) 2456 1 (auto-detect for YMF744/754 only)
2515 fm_port 2457 fm_port
2516 0x388,0x398,0x3a0,0x3a8, 0 (disable) by d 2458 0x388,0x398,0x3a0,0x3a8, 0 (disable) by default
2517 1 (auto-detect for YMF744/754 only) 2459 1 (auto-detect for YMF744/754 only)
2518 joystick_port 2460 joystick_port
2519 0x201,0x202,0x204,0x205, 0 (disable) by d 2461 0x201,0x202,0x204,0x205, 0 (disable) by default,
2520 1 (auto-detect) 2462 1 (auto-detect)
2521 rear_switch 2463 rear_switch
2522 enable shared rear/line-in switch (bool) 2464 enable shared rear/line-in switch (bool)
2523 2465
2524 This module supports autoprobe and multiple c 2466 This module supports autoprobe and multiple chips.
2525 2467
2526 The power-management is supported. 2468 The power-management is supported.
2527 2469
2528 Module snd-pdaudiocf 2470 Module snd-pdaudiocf
2529 -------------------- 2471 --------------------
2530 2472
2531 Module for Sound Core PDAudioCF sound card. 2473 Module for Sound Core PDAudioCF sound card.
2532 2474
2533 The power-management is supported. 2475 The power-management is supported.
2534 2476
2535 2477
2536 AC97 Quirk Option 2478 AC97 Quirk Option
2537 ================= 2479 =================
2538 2480
2539 The ac97_quirk option is used to enable/overr 2481 The ac97_quirk option is used to enable/override the workaround for
2540 specific devices on drivers for on-board AC'9 2482 specific devices on drivers for on-board AC'97 controllers like
2541 snd-intel8x0. Some hardware have swapped out 2483 snd-intel8x0. Some hardware have swapped output pins between Master
2542 and Headphone, or Surround (thanks to confusi 2484 and Headphone, or Surround (thanks to confusion of AC'97
2543 specifications from version to version :-) 2485 specifications from version to version :-)
2544 2486
2545 The driver provides the auto-detection of kno 2487 The driver provides the auto-detection of known problematic devices,
2546 but some might be unknown or wrongly detected 2488 but some might be unknown or wrongly detected. In such a case, pass
2547 the proper value with this option. 2489 the proper value with this option.
2548 2490
2549 The following strings are accepted: 2491 The following strings are accepted:
2550 2492
2551 default 2493 default
2552 Don't override the default setting 2494 Don't override the default setting
2553 none 2495 none
2554 Disable the quirk 2496 Disable the quirk
2555 hp_only 2497 hp_only
2556 Bind Master and Headphone controls as a s 2498 Bind Master and Headphone controls as a single control
2557 swap_hp 2499 swap_hp
2558 Swap headphone and master controls 2500 Swap headphone and master controls
2559 swap_surround 2501 swap_surround
2560 Swap master and surround controls 2502 Swap master and surround controls
2561 ad_sharing 2503 ad_sharing
2562 For AD1985, turn on OMS bit and use headp 2504 For AD1985, turn on OMS bit and use headphone
2563 alc_jack 2505 alc_jack
2564 For ALC65x, turn on the jack sense mode 2506 For ALC65x, turn on the jack sense mode
2565 inv_eapd 2507 inv_eapd
2566 Inverted EAPD implementation 2508 Inverted EAPD implementation
2567 mute_led 2509 mute_led
2568 Bind EAPD bit for turning on/off mute LED 2510 Bind EAPD bit for turning on/off mute LED
2569 2511
2570 For backward compatibility, the corresponding 2512 For backward compatibility, the corresponding integer value -1, 0, ...
2571 are accepted, too. 2513 are accepted, too.
2572 2514
2573 For example, if ``Master`` volume control has 2515 For example, if ``Master`` volume control has no effect on your device
2574 but only ``Headphone`` does, pass ac97_quirk= 2516 but only ``Headphone`` does, pass ac97_quirk=hp_only module option.
2575 2517
2576 2518
2577 Configuring Non-ISAPNP Cards 2519 Configuring Non-ISAPNP Cards
2578 ============================ 2520 ============================
2579 2521
2580 When the kernel is configured with ISA-PnP su 2522 When the kernel is configured with ISA-PnP support, the modules
2581 supporting the isapnp cards will have module 2523 supporting the isapnp cards will have module options ``isapnp``.
2582 If this option is set, *only* the ISA-PnP dev 2524 If this option is set, *only* the ISA-PnP devices will be probed.
2583 For probing the non ISA-PnP cards, you have t 2525 For probing the non ISA-PnP cards, you have to pass ``isapnp=0`` option
2584 together with the proper i/o and irq configur 2526 together with the proper i/o and irq configuration.
2585 2527
2586 When the kernel is configured without ISA-PnP 2528 When the kernel is configured without ISA-PnP support, isapnp option
2587 will be not built in. 2529 will be not built in.
2588 2530
2589 2531
2590 Module Autoloading Support 2532 Module Autoloading Support
2591 ========================== 2533 ==========================
2592 2534
2593 The ALSA drivers can be loaded automatically 2535 The ALSA drivers can be loaded automatically on demand by defining
2594 module aliases. The string ``snd-card-%1`` i 2536 module aliases. The string ``snd-card-%1`` is requested for ALSA native
2595 devices where ``%i`` is sound card number fro 2537 devices where ``%i`` is sound card number from zero to seven.
2596 2538
2597 To auto-load an ALSA driver for OSS services, 2539 To auto-load an ALSA driver for OSS services, define the string
2598 ``sound-slot-%i`` where ``%i`` means the slot 2540 ``sound-slot-%i`` where ``%i`` means the slot number for OSS, which
2599 corresponds to the card index of ALSA. Usual 2541 corresponds to the card index of ALSA. Usually, define this
2600 as the same card module. 2542 as the same card module.
2601 2543
2602 An example configuration for a single emu10k1 2544 An example configuration for a single emu10k1 card is like below:
2603 :: 2545 ::
2604 2546
2605 ----- /etc/modprobe.d/alsa.conf 2547 ----- /etc/modprobe.d/alsa.conf
2606 alias snd-card-0 snd-emu10k1 2548 alias snd-card-0 snd-emu10k1
2607 alias sound-slot-0 snd-emu10k1 2549 alias sound-slot-0 snd-emu10k1
2608 ----- /etc/modprobe.d/alsa.conf 2550 ----- /etc/modprobe.d/alsa.conf
2609 2551
2610 The available number of auto-loaded sound car 2552 The available number of auto-loaded sound cards depends on the module
2611 option ``cards_limit`` of snd module. As def 2553 option ``cards_limit`` of snd module. As default it's set to 1.
2612 To enable the auto-loading of multiple cards, 2554 To enable the auto-loading of multiple cards, specify the number of
2613 sound cards in that option. 2555 sound cards in that option.
2614 2556
2615 When multiple cards are available, it'd bette 2557 When multiple cards are available, it'd better to specify the index
2616 number for each card via module option, too, 2558 number for each card via module option, too, so that the order of
2617 cards is kept consistent. 2559 cards is kept consistent.
2618 2560
2619 An example configuration for two sound cards 2561 An example configuration for two sound cards is like below:
2620 :: 2562 ::
2621 2563
2622 ----- /etc/modprobe.d/alsa.conf 2564 ----- /etc/modprobe.d/alsa.conf
2623 # ALSA portion 2565 # ALSA portion
2624 options snd cards_limit=2 2566 options snd cards_limit=2
2625 alias snd-card-0 snd-interwave 2567 alias snd-card-0 snd-interwave
2626 alias snd-card-1 snd-ens1371 2568 alias snd-card-1 snd-ens1371
2627 options snd-interwave index=0 2569 options snd-interwave index=0
2628 options snd-ens1371 index=1 2570 options snd-ens1371 index=1
2629 # OSS/Free portion 2571 # OSS/Free portion
2630 alias sound-slot-0 snd-interwave 2572 alias sound-slot-0 snd-interwave
2631 alias sound-slot-1 snd-ens1371 2573 alias sound-slot-1 snd-ens1371
2632 ----- /etc/modprobe.d/alsa.conf 2574 ----- /etc/modprobe.d/alsa.conf
2633 2575
2634 In this example, the interwave card is always 2576 In this example, the interwave card is always loaded as the first card
2635 (index 0) and ens1371 as the second (index 1) 2577 (index 0) and ens1371 as the second (index 1).
2636 2578
2637 Alternative (and new) way to fixate the slot 2579 Alternative (and new) way to fixate the slot assignment is to use
2638 ``slots`` option of snd module. In the case 2580 ``slots`` option of snd module. In the case above, specify like the
2639 following: 2581 following:
2640 :: 2582 ::
2641 2583
2642 options snd slots=snd-interwave,snd-ens13 2584 options snd slots=snd-interwave,snd-ens1371
2643 2585
2644 Then, the first slot (#0) is reserved for snd 2586 Then, the first slot (#0) is reserved for snd-interwave driver, and
2645 the second (#1) for snd-ens1371. You can omi 2587 the second (#1) for snd-ens1371. You can omit index option in each
2646 driver if slots option is used (although you 2588 driver if slots option is used (although you can still have them at
2647 the same time as long as they don't conflict) 2589 the same time as long as they don't conflict).
2648 2590
2649 The slots option is especially useful for avo 2591 The slots option is especially useful for avoiding the possible
2650 hot-plugging and the resultant slot conflict. 2592 hot-plugging and the resultant slot conflict. For example, in the
2651 case above again, the first two slots are alr 2593 case above again, the first two slots are already reserved. If any
2652 other driver (e.g. snd-usb-audio) is loaded b 2594 other driver (e.g. snd-usb-audio) is loaded before snd-interwave or
2653 snd-ens1371, it will be assigned to the third 2595 snd-ens1371, it will be assigned to the third or later slot.
2654 2596
2655 When a module name is given with '!', the slo 2597 When a module name is given with '!', the slot will be given for any
2656 modules but that name. For example, ``slots= 2598 modules but that name. For example, ``slots=!snd-pcsp`` will reserve
2657 the first slot for any modules but snd-pcsp. 2599 the first slot for any modules but snd-pcsp.
2658 2600
2659 2601
2660 ALSA PCM devices to OSS devices mapping 2602 ALSA PCM devices to OSS devices mapping
2661 ======================================= 2603 =======================================
2662 :: 2604 ::
2663 2605
2664 /dev/snd/pcmC0D0[c|p] -> /dev/audio0 (/d 2606 /dev/snd/pcmC0D0[c|p] -> /dev/audio0 (/dev/audio) -> minor 4
2665 /dev/snd/pcmC0D0[c|p] -> /dev/dsp0 (/dev 2607 /dev/snd/pcmC0D0[c|p] -> /dev/dsp0 (/dev/dsp) -> minor 3
2666 /dev/snd/pcmC0D1[c|p] -> /dev/adsp0 (/de 2608 /dev/snd/pcmC0D1[c|p] -> /dev/adsp0 (/dev/adsp) -> minor 12
2667 /dev/snd/pcmC1D0[c|p] -> /dev/audio1 2609 /dev/snd/pcmC1D0[c|p] -> /dev/audio1 -> minor 4+16 = 20
2668 /dev/snd/pcmC1D0[c|p] -> /dev/dsp1 2610 /dev/snd/pcmC1D0[c|p] -> /dev/dsp1 -> minor 3+16 = 19
2669 /dev/snd/pcmC1D1[c|p] -> /dev/adsp1 2611 /dev/snd/pcmC1D1[c|p] -> /dev/adsp1 -> minor 12+16 = 28
2670 /dev/snd/pcmC2D0[c|p] -> /dev/audio2 2612 /dev/snd/pcmC2D0[c|p] -> /dev/audio2 -> minor 4+32 = 36
2671 /dev/snd/pcmC2D0[c|p] -> /dev/dsp2 2613 /dev/snd/pcmC2D0[c|p] -> /dev/dsp2 -> minor 3+32 = 39
2672 /dev/snd/pcmC2D1[c|p] -> /dev/adsp2 2614 /dev/snd/pcmC2D1[c|p] -> /dev/adsp2 -> minor 12+32 = 44
2673 2615
2674 The first number from ``/dev/snd/pcmC{X}D{Y}[ 2616 The first number from ``/dev/snd/pcmC{X}D{Y}[c|p]`` expression means
2675 sound card number and second means device num 2617 sound card number and second means device number. The ALSA devices
2676 have either ``c`` or ``p`` suffix indicating 2618 have either ``c`` or ``p`` suffix indicating the direction, capture and
2677 playback, respectively. 2619 playback, respectively.
2678 2620
2679 Please note that the device mapping above may 2621 Please note that the device mapping above may be varied via the module
2680 options of snd-pcm-oss module. 2622 options of snd-pcm-oss module.
2681 2623
2682 2624
2683 Proc interfaces (/proc/asound) 2625 Proc interfaces (/proc/asound)
2684 ============================== 2626 ==============================
2685 2627
2686 /proc/asound/card#/pcm#[cp]/oss 2628 /proc/asound/card#/pcm#[cp]/oss
2687 ------------------------------- 2629 -------------------------------
2688 erase 2630 erase
2689 erase all additional information about OS 2631 erase all additional information about OSS applications
2690 2632
2691 <app_name> <fragments> <fragment_size> [<opti 2633 <app_name> <fragments> <fragment_size> [<options>]
2692 <app_name> 2634 <app_name>
2693 name of application with (higher prio 2635 name of application with (higher priority) or without path
2694 <fragments> 2636 <fragments>
2695 number of fragments or zero if auto 2637 number of fragments or zero if auto
2696 <fragment_size> 2638 <fragment_size>
2697 size of fragment in bytes or zero if 2639 size of fragment in bytes or zero if auto
2698 <options> 2640 <options>
2699 optional parameters 2641 optional parameters
2700 2642
2701 disable 2643 disable
2702 the application tries to open a p 2644 the application tries to open a pcm device for
2703 this channel but does not want to 2645 this channel but does not want to use it.
2704 (Cause a bug or mmap needs) 2646 (Cause a bug or mmap needs)
2705 It's good for Quake etc... 2647 It's good for Quake etc...
2706 direct 2648 direct
2707 don't use plugins 2649 don't use plugins
2708 block 2650 block
2709 force block mode (rvplayer) 2651 force block mode (rvplayer)
2710 non-block 2652 non-block
2711 force non-block mode 2653 force non-block mode
2712 whole-frag 2654 whole-frag
2713 write only whole fragments (optim 2655 write only whole fragments (optimization affecting
2714 playback only) 2656 playback only)
2715 no-silence 2657 no-silence
2716 do not fill silence ahead to avoi 2658 do not fill silence ahead to avoid clicks
2717 buggy-ptr 2659 buggy-ptr
2718 Returns the whitespace blocks in 2660 Returns the whitespace blocks in GETOPTR ioctl
2719 instead of filled blocks 2661 instead of filled blocks
2720 2662
2721 Example: 2663 Example:
2722 :: 2664 ::
2723 2665
2724 echo "x11amp 128 16384" > /proc/asound/ca 2666 echo "x11amp 128 16384" > /proc/asound/card0/pcm0p/oss
2725 echo "squake 0 0 disable" > /proc/asound/ 2667 echo "squake 0 0 disable" > /proc/asound/card0/pcm0c/oss
2726 echo "rvplayer 0 0 block" > /proc/asound/ 2668 echo "rvplayer 0 0 block" > /proc/asound/card0/pcm0p/oss
2727 2669
2728 2670
2729 Early Buffer Allocation 2671 Early Buffer Allocation
2730 ======================= 2672 =======================
2731 2673
2732 Some drivers (e.g. hdsp) require the large co 2674 Some drivers (e.g. hdsp) require the large contiguous buffers, and
2733 sometimes it's too late to find such spaces w 2675 sometimes it's too late to find such spaces when the driver module is
2734 actually loaded due to memory fragmentation. 2676 actually loaded due to memory fragmentation. You can pre-allocate the
2735 PCM buffers by loading snd-page-alloc module 2677 PCM buffers by loading snd-page-alloc module and write commands to its
2736 proc file in prior, for example, in the early 2678 proc file in prior, for example, in the early boot stage like
2737 ``/etc/init.d/*.local`` scripts. 2679 ``/etc/init.d/*.local`` scripts.
2738 2680
2739 Reading the proc file /proc/drivers/snd-page- 2681 Reading the proc file /proc/drivers/snd-page-alloc shows the current
2740 usage of page allocation. In writing, you ca 2682 usage of page allocation. In writing, you can send the following
2741 commands to the snd-page-alloc driver: 2683 commands to the snd-page-alloc driver:
2742 2684
2743 * add VENDOR DEVICE MASK SIZE BUFFERS 2685 * add VENDOR DEVICE MASK SIZE BUFFERS
2744 2686
2745 VENDOR and DEVICE are PCI vendor and device I 2687 VENDOR and DEVICE are PCI vendor and device IDs. They take
2746 integer numbers (0x prefix is needed for the 2688 integer numbers (0x prefix is needed for the hex).
2747 MASK is the PCI DMA mask. Pass 0 if not rest 2689 MASK is the PCI DMA mask. Pass 0 if not restricted.
2748 SIZE is the size of each buffer to allocate. 2690 SIZE is the size of each buffer to allocate. You can pass
2749 k and m suffix for KB and MB. The max number 2691 k and m suffix for KB and MB. The max number is 16MB.
2750 BUFFERS is the number of buffers to allocate. 2692 BUFFERS is the number of buffers to allocate. It must be greater
2751 than 0. The max number is 4. 2693 than 0. The max number is 4.
2752 2694
2753 * erase 2695 * erase
2754 2696
2755 This will erase the all pre-allocated buffers 2697 This will erase the all pre-allocated buffers which are not in
2756 use. 2698 use.
2757 2699
2758 2700
2759 Links and Addresses 2701 Links and Addresses
2760 =================== 2702 ===================
2761 2703
2762 ALSA project homepage 2704 ALSA project homepage
2763 http://www.alsa-project.org 2705 http://www.alsa-project.org
2764 Kernel Bugzilla 2706 Kernel Bugzilla
2765 http://bugzilla.kernel.org/ 2707 http://bugzilla.kernel.org/
2766 ALSA Developers ML 2708 ALSA Developers ML
2767 mailto:alsa-devel@alsa-project.org 2709 mailto:alsa-devel@alsa-project.org
2768 alsa-info.sh script 2710 alsa-info.sh script
2769 https://www.alsa-project.org/alsa-info.sh 2711 https://www.alsa-project.org/alsa-info.sh
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.