1 ============================================== 1 ==============================================================
2 Advanced Linux Sound Architecture - Driver Con 2 Advanced Linux Sound Architecture - Driver Configuration guide
3 ============================================== 3 ==============================================================
4 4
5 5
6 Kernel Configuration 6 Kernel Configuration
7 ==================== 7 ====================
8 8
9 To enable ALSA support you need at least to bu 9 To enable ALSA support you need at least to build the kernel with
10 primary sound card support (``CONFIG_SOUND``). 10 primary sound card support (``CONFIG_SOUND``). Since ALSA can emulate
11 OSS, you don't have to choose any of the OSS m 11 OSS, you don't have to choose any of the OSS modules.
12 12
13 Enable "OSS API emulation" (``CONFIG_SND_OSSEM 13 Enable "OSS API emulation" (``CONFIG_SND_OSSEMUL``) and both OSS mixer
14 and PCM supports if you want to run OSS applic 14 and PCM supports if you want to run OSS applications with ALSA.
15 15
16 If you want to support the WaveTable functiona 16 If you want to support the WaveTable functionality on cards such as
17 SB Live! then you need to enable "Sequencer su 17 SB Live! then you need to enable "Sequencer support"
18 (``CONFIG_SND_SEQUENCER``). 18 (``CONFIG_SND_SEQUENCER``).
19 19
20 To make ALSA debug messages more verbose, enab 20 To make ALSA debug messages more verbose, enable the "Verbose printk"
21 and "Debug" options. To check for memory leak 21 and "Debug" options. To check for memory leaks, turn on "Debug memory"
22 too. "Debug detection" will add checks for th 22 too. "Debug detection" will add checks for the detection of cards.
23 23
24 Please note that all the ALSA ISA drivers supp 24 Please note that all the ALSA ISA drivers support the Linux isapnp API
25 (if the card supports ISA PnP). You don't nee 25 (if the card supports ISA PnP). You don't need to configure the cards
26 using isapnptools. 26 using isapnptools.
27 27
28 28
29 Module parameters 29 Module parameters
30 ================= 30 =================
31 31
32 The user can load modules with options. If the 32 The user can load modules with options. If the module supports more than
33 one card and you have more than one card of th 33 one card and you have more than one card of the same type then you can
34 specify multiple values for the option separat 34 specify multiple values for the option separated by commas.
35 35
36 36
37 Module snd 37 Module snd
38 ---------- 38 ----------
39 39
40 The core ALSA module. It is used by all ALSA 40 The core ALSA module. It is used by all ALSA card drivers.
41 It takes the following options which have glob 41 It takes the following options which have global effects.
42 42
43 major 43 major
44 major number for sound driver; 44 major number for sound driver;
45 Default: 116 45 Default: 116
46 cards_limit 46 cards_limit
47 limiting card index for auto-loading (1-8) 47 limiting card index for auto-loading (1-8);
48 Default: 1; 48 Default: 1;
49 For auto-loading more than one card, speci 49 For auto-loading more than one card, specify this option
50 together with snd-card-X aliases. 50 together with snd-card-X aliases.
51 slots 51 slots
52 Reserve the slot index for the given drive 52 Reserve the slot index for the given driver;
53 This option takes multiple strings. 53 This option takes multiple strings.
54 See `Module Autoloading Support`_ section 54 See `Module Autoloading Support`_ section for details.
55 debug 55 debug
56 Specifies the debug message level; 56 Specifies the debug message level;
57 (0 = disable debug prints, 1 = normal debu 57 (0 = disable debug prints, 1 = normal debug messages,
58 2 = verbose debug messages); 58 2 = verbose debug messages);
59 This option appears only when ``CONFIG_SND 59 This option appears only when ``CONFIG_SND_DEBUG=y``.
60 This option can be dynamically changed via 60 This option can be dynamically changed via sysfs
61 /sys/modules/snd/parameters/debug file. 61 /sys/modules/snd/parameters/debug file.
62 62
63 Module snd-pcm-oss 63 Module snd-pcm-oss
64 ------------------ 64 ------------------
65 65
66 The PCM OSS emulation module. 66 The PCM OSS emulation module.
67 This module takes options which change the map 67 This module takes options which change the mapping of devices.
68 68
69 dsp_map 69 dsp_map
70 PCM device number maps assigned to the 1st 70 PCM device number maps assigned to the 1st OSS device;
71 Default: 0 71 Default: 0
72 adsp_map 72 adsp_map
73 PCM device number maps assigned to the 2nd 73 PCM device number maps assigned to the 2nd OSS device;
74 Default: 1 74 Default: 1
75 nonblock_open 75 nonblock_open
76 Don't block opening busy PCM devices; 76 Don't block opening busy PCM devices;
77 Default: 1 77 Default: 1
78 78
79 For example, when ``dsp_map=2``, /dev/dsp will 79 For example, when ``dsp_map=2``, /dev/dsp will be mapped to PCM #2 of
80 the card #0. Similarly, when ``adsp_map=0``, 80 the card #0. Similarly, when ``adsp_map=0``, /dev/adsp will be mapped
81 to PCM #0 of the card #0. 81 to PCM #0 of the card #0.
82 For changing the second or later card, specify 82 For changing the second or later card, specify the option with
83 commas, such like ``dsp_map=0,1``. 83 commas, such like ``dsp_map=0,1``.
84 84
85 ``nonblock_open`` option is used to change the 85 ``nonblock_open`` option is used to change the behavior of the PCM
86 regarding opening the device. When this optio 86 regarding opening the device. When this option is non-zero,
87 opening a busy OSS PCM device won't be blocked 87 opening a busy OSS PCM device won't be blocked but return
88 immediately with EAGAIN (just like O_NONBLOCK 88 immediately with EAGAIN (just like O_NONBLOCK flag).
89 89
90 Module snd-rawmidi 90 Module snd-rawmidi
91 ------------------ 91 ------------------
92 92
93 This module takes options which change the map 93 This module takes options which change the mapping of devices.
94 similar to those of the snd-pcm-oss module. 94 similar to those of the snd-pcm-oss module.
95 95
96 midi_map 96 midi_map
97 MIDI device number maps assigned to the 1s 97 MIDI device number maps assigned to the 1st OSS device;
98 Default: 0 98 Default: 0
99 amidi_map 99 amidi_map
100 MIDI device number maps assigned to the 2n 100 MIDI device number maps assigned to the 2nd OSS device;
101 Default: 1 101 Default: 1
102 102
103 Module snd-soc-core 103 Module snd-soc-core
104 ------------------- 104 -------------------
105 105
106 The soc core module. It is used by all ALSA ca 106 The soc core module. It is used by all ALSA card drivers.
107 It takes the following options which have glob 107 It takes the following options which have global effects.
108 108
109 prealloc_buffer_size_kbytes 109 prealloc_buffer_size_kbytes
110 Specify prealloc buffer size in kbytes (de 110 Specify prealloc buffer size in kbytes (default: 512).
111 111
112 Common parameters for top sound card modules 112 Common parameters for top sound card modules
113 -------------------------------------------- 113 --------------------------------------------
114 114
115 Each of top level sound card module takes the 115 Each of top level sound card module takes the following options.
116 116
117 index 117 index
118 index (slot #) of sound card; 118 index (slot #) of sound card;
119 Values: 0 through 31 or negative; 119 Values: 0 through 31 or negative;
120 If nonnegative, assign that index number; 120 If nonnegative, assign that index number;
121 if negative, interpret as a bitmask of per 121 if negative, interpret as a bitmask of permissible indices;
122 the first free permitted index is assigned 122 the first free permitted index is assigned;
123 Default: -1 123 Default: -1
124 id 124 id
125 card ID (identifier or name); 125 card ID (identifier or name);
126 Can be up to 15 characters long; 126 Can be up to 15 characters long;
127 Default: the card type; 127 Default: the card type;
128 A directory by this name is created under 128 A directory by this name is created under /proc/asound/
129 containing information about the card; 129 containing information about the card;
130 This ID can be used instead of the index n 130 This ID can be used instead of the index number in
131 identifying the card 131 identifying the card
132 enable 132 enable
133 enable card; 133 enable card;
134 Default: enabled, for PCI and ISA PnP card 134 Default: enabled, for PCI and ISA PnP cards
135 135
136 These options are used for either specifying t 136 These options are used for either specifying the order of instances or
137 controlling enabling and disabling of each one 137 controlling enabling and disabling of each one of the devices if there
138 are multiple devices bound with the same drive 138 are multiple devices bound with the same driver. For example, there are
139 many machines which have two HD-audio controll 139 many machines which have two HD-audio controllers (one for HDMI/DP
140 audio and another for onboard analog). In most 140 audio and another for onboard analog). In most cases, the second one is
141 in primary usage, and people would like to ass 141 in primary usage, and people would like to assign it as the first
142 appearing card. They can do it by specifying " 142 appearing card. They can do it by specifying "index=1,0" module
143 parameter, which will swap the assignment slot 143 parameter, which will swap the assignment slots.
144 144
145 Today, with the sound backend like PulseAudio 145 Today, with the sound backend like PulseAudio and PipeWire which
146 supports dynamic configuration, it's of little 146 supports dynamic configuration, it's of little use, but that was a
147 help for static configuration in the past. 147 help for static configuration in the past.
148 148
149 Module snd-adlib 149 Module snd-adlib
150 ---------------- 150 ----------------
151 151
152 Module for AdLib FM cards. 152 Module for AdLib FM cards.
153 153
154 port 154 port
155 port # for OPL chip 155 port # for OPL chip
156 156
157 This module supports multiple cards. It does n 157 This module supports multiple cards. It does not support autoprobe, so
158 the port must be specified. For actual AdLib F 158 the port must be specified. For actual AdLib FM cards it will be 0x388.
159 Note that this card does not have PCM support 159 Note that this card does not have PCM support and no mixer; only FM
160 synthesis. 160 synthesis.
161 161
162 Make sure you have ``sbiload`` from the alsa-t 162 Make sure you have ``sbiload`` from the alsa-tools package available and,
163 after loading the module, find out the assigne 163 after loading the module, find out the assigned ALSA sequencer port
164 number through ``sbiload -l``. 164 number through ``sbiload -l``.
165 165
166 Example output: 166 Example output:
167 :: 167 ::
168 168
169 Port Client name 169 Port Client name Port name
170 64:0 OPL2 FM synth 170 64:0 OPL2 FM synth OPL2 FM Port
171 171
172 Load the ``std.sb`` and ``drums.sb`` patches a 172 Load the ``std.sb`` and ``drums.sb`` patches also supplied by ``sbiload``:
173 :: 173 ::
174 174
175 sbiload -p 64:0 std.sb drums.sb 175 sbiload -p 64:0 std.sb drums.sb
176 176
177 If you use this driver to drive an OPL3, you c 177 If you use this driver to drive an OPL3, you can use ``std.o3`` and ``drums.o3``
178 instead. To have the card produce sound, use ` 178 instead. To have the card produce sound, use ``aplaymidi`` from alsa-utils:
179 :: 179 ::
180 180
181 aplaymidi -p 64:0 foo.mid 181 aplaymidi -p 64:0 foo.mid
182 182
183 Module snd-ad1816a 183 Module snd-ad1816a
184 ------------------ 184 ------------------
185 185
186 Module for sound cards based on Analog Devices 186 Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips.
187 187
188 clockfreq 188 clockfreq
189 Clock frequency for AD1816A chip (default 189 Clock frequency for AD1816A chip (default = 0, 33000Hz)
190 190
191 This module supports multiple cards, autoprobe 191 This module supports multiple cards, autoprobe and PnP.
192 192
193 Module snd-ad1848 193 Module snd-ad1848
194 ----------------- 194 -----------------
195 195
196 Module for sound cards based on AD1848/AD1847/ 196 Module for sound cards based on AD1848/AD1847/CS4248 ISA chips.
197 197
198 port 198 port
199 port # for AD1848 chip 199 port # for AD1848 chip
200 irq 200 irq
201 IRQ # for AD1848 chip 201 IRQ # for AD1848 chip
202 dma1 202 dma1
203 DMA # for AD1848 chip (0,1,3) 203 DMA # for AD1848 chip (0,1,3)
204 204
205 This module supports multiple cards. It does 205 This module supports multiple cards. It does not support autoprobe
206 thus main port must be specified!!! Other port 206 thus main port must be specified!!! Other ports are optional.
207 207
208 The power-management is supported. 208 The power-management is supported.
209 209
210 Module snd-ad1889 210 Module snd-ad1889
211 ----------------- 211 -----------------
212 212
213 Module for Analog Devices AD1889 chips. 213 Module for Analog Devices AD1889 chips.
214 214
215 ac97_quirk 215 ac97_quirk
216 AC'97 workaround for strange hardware; 216 AC'97 workaround for strange hardware;
217 See the description of intel8x0 module for 217 See the description of intel8x0 module for details.
218 218
219 This module supports multiple cards. 219 This module supports multiple cards.
220 220
221 Module snd-ali5451 221 Module snd-ali5451
222 ------------------ 222 ------------------
223 223
224 Module for ALi M5451 PCI chip. 224 Module for ALi M5451 PCI chip.
225 225
226 pcm_channels 226 pcm_channels
227 Number of hardware channels assigned for P 227 Number of hardware channels assigned for PCM
228 spdif 228 spdif
229 Support SPDIF I/O; 229 Support SPDIF I/O;
230 Default: disabled 230 Default: disabled
231 231
232 This module supports one chip and autoprobe. 232 This module supports one chip and autoprobe.
233 233
234 The power-management is supported. 234 The power-management is supported.
235 235
236 Module snd-als100 236 Module snd-als100
237 ----------------- 237 -----------------
238 238
239 Module for sound cards based on Avance Logic A 239 Module for sound cards based on Avance Logic ALS100/ALS120 ISA chips.
240 240
241 This module supports multiple cards, autoprobe 241 This module supports multiple cards, autoprobe and PnP.
242 242
243 The power-management is supported. 243 The power-management is supported.
244 244
245 Module snd-als300 245 Module snd-als300
246 ----------------- 246 -----------------
247 247
248 Module for Avance Logic ALS300 and ALS300+ 248 Module for Avance Logic ALS300 and ALS300+
249 249
250 This module supports multiple cards. 250 This module supports multiple cards.
251 251
252 The power-management is supported. 252 The power-management is supported.
253 253
254 Module snd-als4000 254 Module snd-als4000
255 ------------------ 255 ------------------
256 256
257 Module for sound cards based on Avance Logic A 257 Module for sound cards based on Avance Logic ALS4000 PCI chip.
258 258
259 joystick_port 259 joystick_port
260 port # for legacy joystick support; 260 port # for legacy joystick support;
261 0 = disabled (default), 1 = auto-detect 261 0 = disabled (default), 1 = auto-detect
262 262
263 This module supports multiple cards, autoprobe 263 This module supports multiple cards, autoprobe and PnP.
264 264
265 The power-management is supported. 265 The power-management is supported.
266 266
267 Module snd-asihpi 267 Module snd-asihpi
268 ----------------- 268 -----------------
269 269
270 Module for AudioScience ASI soundcards 270 Module for AudioScience ASI soundcards
271 271
272 enable_hpi_hwdep 272 enable_hpi_hwdep
273 enable HPI hwdep for AudioScience soundcar 273 enable HPI hwdep for AudioScience soundcard
274 274
275 This module supports multiple cards. 275 This module supports multiple cards.
276 The driver requires the firmware loader suppor 276 The driver requires the firmware loader support on kernel.
277 277
278 Module snd-atiixp 278 Module snd-atiixp
279 ----------------- 279 -----------------
280 280
281 Module for ATI IXP 150/200/250/400 AC97 contro 281 Module for ATI IXP 150/200/250/400 AC97 controllers.
282 282
283 ac97_clock 283 ac97_clock
284 AC'97 clock (default = 48000) 284 AC'97 clock (default = 48000)
285 ac97_quirk 285 ac97_quirk
286 AC'97 workaround for strange hardware; 286 AC'97 workaround for strange hardware;
287 See `AC97 Quirk Option`_ section below. 287 See `AC97 Quirk Option`_ section below.
288 ac97_codec 288 ac97_codec
289 Workaround to specify which AC'97 codec in 289 Workaround to specify which AC'97 codec instead of probing.
290 If this works for you file a bug with your 290 If this works for you file a bug with your `lspci -vn` output.
291 (-2 = Force probing, -1 = Default behavior 291 (-2 = Force probing, -1 = Default behavior, 0-2 = Use the
292 specified codec.) 292 specified codec.)
293 spdif_aclink 293 spdif_aclink
294 S/PDIF transfer over AC-link (default = 1) 294 S/PDIF transfer over AC-link (default = 1)
295 295
296 This module supports one card and autoprobe. 296 This module supports one card and autoprobe.
297 297
298 ATI IXP has two different methods to control S 298 ATI IXP has two different methods to control SPDIF output. One is
299 over AC-link and another is over the "direct" 299 over AC-link and another is over the "direct" SPDIF output. The
300 implementation depends on the motherboard, and 300 implementation depends on the motherboard, and you'll need to
301 choose the correct one via spdif_aclink module 301 choose the correct one via spdif_aclink module option.
302 302
303 The power-management is supported. 303 The power-management is supported.
304 304
305 Module snd-atiixp-modem 305 Module snd-atiixp-modem
306 ----------------------- 306 -----------------------
307 307
308 Module for ATI IXP 150/200/250 AC97 modem cont 308 Module for ATI IXP 150/200/250 AC97 modem controllers.
309 309
310 This module supports one card and autoprobe. 310 This module supports one card and autoprobe.
311 311
312 Note: The default index value of this module i 312 Note: The default index value of this module is -2, i.e. the first
313 slot is excluded. 313 slot is excluded.
314 314
315 The power-management is supported. 315 The power-management is supported.
316 316
317 Module snd-au8810, snd-au8820, snd-au8830 317 Module snd-au8810, snd-au8820, snd-au8830
318 ----------------------------------------- 318 -----------------------------------------
319 319
320 Module for Aureal Vortex, Vortex2 and Advantag 320 Module for Aureal Vortex, Vortex2 and Advantage device.
321 321
322 pcifix 322 pcifix
323 Control PCI workarounds; 323 Control PCI workarounds;
324 0 = Disable all workarounds, 324 0 = Disable all workarounds,
325 1 = Force the PCI latency of the Aureal ca 325 1 = Force the PCI latency of the Aureal card to 0xff,
326 2 = Force the Extend PCI#2 Internal Master 326 2 = Force the Extend PCI#2 Internal Master for Efficient
327 Handling of Dummy Requests on the VIA KT13 327 Handling of Dummy Requests on the VIA KT133 AGP Bridge,
328 3 = Force both settings, 328 3 = Force both settings,
329 255 = Autodetect what is required (default 329 255 = Autodetect what is required (default)
330 330
331 This module supports all ADB PCM channels, ac9 331 This module supports all ADB PCM channels, ac97 mixer, SPDIF, hardware
332 EQ, mpu401, gameport. A3D and wavetable suppor 332 EQ, mpu401, gameport. A3D and wavetable support are still in development.
333 Development and reverse engineering work is be 333 Development and reverse engineering work is being coordinated at
334 https://savannah.nongnu.org/projects/openvorte 334 https://savannah.nongnu.org/projects/openvortex/
335 SPDIF output has a copy of the AC97 codec outp 335 SPDIF output has a copy of the AC97 codec output, unless you use the
336 ``spdif`` pcm device, which allows raw data pa 336 ``spdif`` pcm device, which allows raw data passthru.
337 The hardware EQ hardware and SPDIF is only pre 337 The hardware EQ hardware and SPDIF is only present in the Vortex2 and
338 Advantage. 338 Advantage.
339 339
340 Note: Some ALSA mixer applications don't handl 340 Note: Some ALSA mixer applications don't handle the SPDIF sample rate
341 control correctly. If you have problems regard 341 control correctly. If you have problems regarding this, try
342 another ALSA compliant mixer (alsamixer works) 342 another ALSA compliant mixer (alsamixer works).
343 343
344 Module snd-azt1605 344 Module snd-azt1605
345 ------------------ 345 ------------------
346 346
347 Module for Aztech Sound Galaxy soundcards base 347 Module for Aztech Sound Galaxy soundcards based on the Aztech AZT1605
348 chipset. 348 chipset.
349 349
350 port 350 port
351 port # for BASE (0x220,0x240,0x260,0x280) 351 port # for BASE (0x220,0x240,0x260,0x280)
352 wss_port 352 wss_port
353 port # for WSS (0x530,0x604,0xe80,0xf40) 353 port # for WSS (0x530,0x604,0xe80,0xf40)
354 irq 354 irq
355 IRQ # for WSS (7,9,10,11) 355 IRQ # for WSS (7,9,10,11)
356 dma1 356 dma1
357 DMA # for WSS playback (0,1,3) 357 DMA # for WSS playback (0,1,3)
358 dma2 358 dma2
359 DMA # for WSS capture (0,1), -1 = disabled 359 DMA # for WSS capture (0,1), -1 = disabled (default)
360 mpu_port 360 mpu_port
361 port # for MPU-401 UART (0x300,0x330), -1 361 port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
362 mpu_irq 362 mpu_irq
363 IRQ # for MPU-401 UART (3,5,7,9), -1 = dis 363 IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default)
364 fm_port 364 fm_port
365 port # for OPL3 (0x388), -1 = disabled (de 365 port # for OPL3 (0x388), -1 = disabled (default)
366 366
367 This module supports multiple cards. It does n 367 This module supports multiple cards. It does not support autoprobe:
368 ``port``, ``wss_port``, ``irq`` and ``dma1`` h 368 ``port``, ``wss_port``, ``irq`` and ``dma1`` have to be specified.
369 The other values are optional. 369 The other values are optional.
370 370
371 ``port`` needs to match the BASE ADDRESS jumpe 371 ``port`` needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
372 or the value stored in the card's EEPROM for c 372 or the value stored in the card's EEPROM for cards that have an EEPROM and
373 their "CONFIG MODE" jumper set to "EEPROM SETT 373 their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
374 be chosen freely from the options enumerated a 374 be chosen freely from the options enumerated above.
375 375
376 If ``dma2`` is specified and different from `` 376 If ``dma2`` is specified and different from ``dma1``, the card will operate in
377 full-duplex mode. When ``dma1=3``, only ``dma2 377 full-duplex mode. When ``dma1=3``, only ``dma2=0`` is valid and the only way to
378 enable capture since only channels 0 and 1 are 378 enable capture since only channels 0 and 1 are available for capture.
379 379
380 Generic settings are ``port=0x220 wss_port=0x5 380 Generic settings are ``port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
381 mpu_port=0x330 mpu_irq=9 fm_port=0x388``. 381 mpu_port=0x330 mpu_irq=9 fm_port=0x388``.
382 382
383 Whatever IRQ and DMA channels you pick, be sur 383 Whatever IRQ and DMA channels you pick, be sure to reserve them for
384 legacy ISA in your BIOS. 384 legacy ISA in your BIOS.
385 385
386 Module snd-azt2316 386 Module snd-azt2316
387 ------------------ 387 ------------------
388 388
389 Module for Aztech Sound Galaxy soundcards base 389 Module for Aztech Sound Galaxy soundcards based on the Aztech AZT2316
390 chipset. 390 chipset.
391 391
392 port 392 port
393 port # for BASE (0x220,0x240,0x260,0x280) 393 port # for BASE (0x220,0x240,0x260,0x280)
394 wss_port 394 wss_port
395 port # for WSS (0x530,0x604,0xe80,0xf40) 395 port # for WSS (0x530,0x604,0xe80,0xf40)
396 irq 396 irq
397 IRQ # for WSS (7,9,10,11) 397 IRQ # for WSS (7,9,10,11)
398 dma1 398 dma1
399 DMA # for WSS playback (0,1,3) 399 DMA # for WSS playback (0,1,3)
400 dma2 400 dma2
401 DMA # for WSS capture (0,1), -1 = disabled 401 DMA # for WSS capture (0,1), -1 = disabled (default)
402 mpu_port 402 mpu_port
403 port # for MPU-401 UART (0x300,0x330), -1 403 port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
404 mpu_irq 404 mpu_irq
405 IRQ # for MPU-401 UART (5,7,9,10), -1 = di 405 IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default)
406 fm_port 406 fm_port
407 port # for OPL3 (0x388), -1 = disabled (de 407 port # for OPL3 (0x388), -1 = disabled (default)
408 408
409 This module supports multiple cards. It does n 409 This module supports multiple cards. It does not support autoprobe:
410 ``port``, ``wss_port``, ``irq`` and ``dma1`` h 410 ``port``, ``wss_port``, ``irq`` and ``dma1`` have to be specified.
411 The other values are optional. 411 The other values are optional.
412 412
413 ``port`` needs to match the BASE ADDRESS jumpe 413 ``port`` needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
414 or the value stored in the card's EEPROM for c 414 or the value stored in the card's EEPROM for cards that have an EEPROM and
415 their "CONFIG MODE" jumper set to "EEPROM SETT 415 their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
416 be chosen freely from the options enumerated a 416 be chosen freely from the options enumerated above.
417 417
418 If ``dma2`` is specified and different from `` 418 If ``dma2`` is specified and different from ``dma1``, the card will operate in
419 full-duplex mode. When ``dma1=3``, only ``dma2 419 full-duplex mode. When ``dma1=3``, only ``dma2=0`` is valid and the only way to
420 enable capture since only channels 0 and 1 are 420 enable capture since only channels 0 and 1 are available for capture.
421 421
422 Generic settings are ``port=0x220 wss_port=0x5 422 Generic settings are ``port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
423 mpu_port=0x330 mpu_irq=9 fm_port=0x388``. 423 mpu_port=0x330 mpu_irq=9 fm_port=0x388``.
424 424
425 Whatever IRQ and DMA channels you pick, be sur 425 Whatever IRQ and DMA channels you pick, be sure to reserve them for
426 legacy ISA in your BIOS. 426 legacy ISA in your BIOS.
427 427
428 Module snd-aw2 428 Module snd-aw2
429 -------------- 429 --------------
430 430
431 Module for Audiowerk2 sound card 431 Module for Audiowerk2 sound card
432 432
433 This module supports multiple cards. 433 This module supports multiple cards.
434 434
435 Module snd-azt2320 435 Module snd-azt2320
436 ------------------ 436 ------------------
437 437
438 Module for sound cards based on Aztech System 438 Module for sound cards based on Aztech System AZT2320 ISA chip (PnP only).
439 439
440 This module supports multiple cards, PnP and a 440 This module supports multiple cards, PnP and autoprobe.
441 441
442 The power-management is supported. 442 The power-management is supported.
443 443
444 Module snd-azt3328 444 Module snd-azt3328
445 ------------------ 445 ------------------
446 446
447 Module for sound cards based on Aztech AZF3328 447 Module for sound cards based on Aztech AZF3328 PCI chip.
448 448
449 joystick 449 joystick
450 Enable joystick (default off) 450 Enable joystick (default off)
451 451
452 This module supports multiple cards. 452 This module supports multiple cards.
453 453
454 Module snd-bt87x 454 Module snd-bt87x
455 ---------------- 455 ----------------
456 456
457 Module for video cards based on Bt87x chips. 457 Module for video cards based on Bt87x chips.
458 458
459 digital_rate 459 digital_rate
460 Override the default digital rate (Hz) 460 Override the default digital rate (Hz)
461 load_all 461 load_all
462 Load the driver even if the card model isn 462 Load the driver even if the card model isn't known
463 463
464 This module supports multiple cards. 464 This module supports multiple cards.
465 465
466 Note: The default index value of this module i 466 Note: The default index value of this module is -2, i.e. the first
467 slot is excluded. 467 slot is excluded.
468 468
469 Module snd-ca0106 469 Module snd-ca0106
470 ----------------- 470 -----------------
471 471
472 Module for Creative Audigy LS and SB Live 24bi 472 Module for Creative Audigy LS and SB Live 24bit
473 473
474 This module supports multiple cards. 474 This module supports multiple cards.
475 475
476 476
477 Module snd-cmi8330 477 Module snd-cmi8330
478 ------------------ 478 ------------------
479 479
480 Module for sound cards based on C-Media CMI833 480 Module for sound cards based on C-Media CMI8330 ISA chips.
481 481
482 isapnp 482 isapnp
483 ISA PnP detection - 0 = disable, 1 = enabl 483 ISA PnP detection - 0 = disable, 1 = enable (default)
484 484
485 with ``isapnp=0``, the following options are a 485 with ``isapnp=0``, the following options are available:
486 486
487 wssport 487 wssport
488 port # for CMI8330 chip (WSS) 488 port # for CMI8330 chip (WSS)
489 wssirq 489 wssirq
490 IRQ # for CMI8330 chip (WSS) 490 IRQ # for CMI8330 chip (WSS)
491 wssdma 491 wssdma
492 first DMA # for CMI8330 chip (WSS) 492 first DMA # for CMI8330 chip (WSS)
493 sbport 493 sbport
494 port # for CMI8330 chip (SB16) 494 port # for CMI8330 chip (SB16)
495 sbirq 495 sbirq
496 IRQ # for CMI8330 chip (SB16) 496 IRQ # for CMI8330 chip (SB16)
497 sbdma8 497 sbdma8
498 8bit DMA # for CMI8330 chip (SB16) 498 8bit DMA # for CMI8330 chip (SB16)
499 sbdma16 499 sbdma16
500 16bit DMA # for CMI8330 chip (SB16) 500 16bit DMA # for CMI8330 chip (SB16)
501 fmport 501 fmport
502 (optional) OPL3 I/O port 502 (optional) OPL3 I/O port
503 mpuport 503 mpuport
504 (optional) MPU401 I/O port 504 (optional) MPU401 I/O port
505 mpuirq 505 mpuirq
506 (optional) MPU401 irq # 506 (optional) MPU401 irq #
507 507
508 This module supports multiple cards and autopr 508 This module supports multiple cards and autoprobe.
509 509
510 The power-management is supported. 510 The power-management is supported.
511 511
512 Module snd-cmipci 512 Module snd-cmipci
513 ----------------- 513 -----------------
514 514
515 Module for C-Media CMI8338/8738/8768/8770 PCI 515 Module for C-Media CMI8338/8738/8768/8770 PCI sound cards.
516 516
517 mpu_port 517 mpu_port
518 port address of MIDI interface (8338 only) 518 port address of MIDI interface (8338 only):
519 0x300,0x310,0x320,0x330 = legacy port, 519 0x300,0x310,0x320,0x330 = legacy port,
520 1 = integrated PCI port (default on 8738), 520 1 = integrated PCI port (default on 8738),
521 0 = disable 521 0 = disable
522 fm_port 522 fm_port
523 port address of OPL-3 FM synthesizer (8x38 523 port address of OPL-3 FM synthesizer (8x38 only):
524 0x388 = legacy port, 524 0x388 = legacy port,
525 1 = integrated PCI port (default on 8738), 525 1 = integrated PCI port (default on 8738),
526 0 = disable 526 0 = disable
527 soft_ac3 527 soft_ac3
528 Software-conversion of raw SPDIF packets ( 528 Software-conversion of raw SPDIF packets (model 033 only) (default = 1)
529 joystick_port 529 joystick_port
530 Joystick port address (0 = disable, 1 = au 530 Joystick port address (0 = disable, 1 = auto-detect)
531 531
532 This module supports autoprobe and multiple ca 532 This module supports autoprobe and multiple cards.
533 533
534 The power-management is supported. 534 The power-management is supported.
535 535
536 Module snd-cs4231 536 Module snd-cs4231
537 ----------------- 537 -----------------
538 538
539 Module for sound cards based on CS4231 ISA chi 539 Module for sound cards based on CS4231 ISA chips.
540 540
541 port 541 port
542 port # for CS4231 chip 542 port # for CS4231 chip
543 mpu_port 543 mpu_port
544 port # for MPU-401 UART (optional), -1 = d 544 port # for MPU-401 UART (optional), -1 = disable
545 irq 545 irq
546 IRQ # for CS4231 chip 546 IRQ # for CS4231 chip
547 mpu_irq 547 mpu_irq
548 IRQ # for MPU-401 UART 548 IRQ # for MPU-401 UART
549 dma1 549 dma1
550 first DMA # for CS4231 chip 550 first DMA # for CS4231 chip
551 dma2 551 dma2
552 second DMA # for CS4231 chip 552 second DMA # for CS4231 chip
553 553
554 This module supports multiple cards. This modu 554 This module supports multiple cards. This module does not support autoprobe
555 thus main port must be specified!!! Other port 555 thus main port must be specified!!! Other ports are optional.
556 556
557 The power-management is supported. 557 The power-management is supported.
558 558
559 Module snd-cs4236 559 Module snd-cs4236
560 ----------------- 560 -----------------
561 561
562 Module for sound cards based on CS4232/CS4232A 562 Module for sound cards based on CS4232/CS4232A,
563 CS4235/CS4236/CS4236B/CS4237B/CS4238B/CS4239 I 563 CS4235/CS4236/CS4236B/CS4237B/CS4238B/CS4239 ISA chips.
564 564
565 isapnp 565 isapnp
566 ISA PnP detection - 0 = disable, 1 = enabl 566 ISA PnP detection - 0 = disable, 1 = enable (default)
567 567
568 with ``isapnp=0``, the following options are a 568 with ``isapnp=0``, the following options are available:
569 569
570 port 570 port
571 port # for CS4236 chip (PnP setup - 0x534) 571 port # for CS4236 chip (PnP setup - 0x534)
572 cport 572 cport
573 control port # for CS4236 chip (PnP setup 573 control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00)
574 mpu_port 574 mpu_port
575 port # for MPU-401 UART (PnP setup - 0x300 575 port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
576 fm_port 576 fm_port
577 FM port # for CS4236 chip (PnP setup - 0x3 577 FM port # for CS4236 chip (PnP setup - 0x388), -1 = disable
578 irq 578 irq
579 IRQ # for CS4236 chip (5,7,9,11,12,15) 579 IRQ # for CS4236 chip (5,7,9,11,12,15)
580 mpu_irq 580 mpu_irq
581 IRQ # for MPU-401 UART (9,11,12,15) 581 IRQ # for MPU-401 UART (9,11,12,15)
582 dma1 582 dma1
583 first DMA # for CS4236 chip (0,1,3) 583 first DMA # for CS4236 chip (0,1,3)
584 dma2 584 dma2
585 second DMA # for CS4236 chip (0,1,3), -1 = 585 second DMA # for CS4236 chip (0,1,3), -1 = disable
586 586
587 This module supports multiple cards. This modu 587 This module supports multiple cards. This module does not support autoprobe
588 (if ISA PnP is not used) thus main port and co 588 (if ISA PnP is not used) thus main port and control port must be
589 specified!!! Other ports are optional. 589 specified!!! Other ports are optional.
590 590
591 The power-management is supported. 591 The power-management is supported.
592 592
593 This module is aliased as snd-cs4232 since it 593 This module is aliased as snd-cs4232 since it provides the old
594 snd-cs4232 functionality, too. 594 snd-cs4232 functionality, too.
595 595
596 Module snd-cs4281 596 Module snd-cs4281
597 ----------------- 597 -----------------
598 598
599 Module for Cirrus Logic CS4281 soundchip. 599 Module for Cirrus Logic CS4281 soundchip.
600 600
601 dual_codec 601 dual_codec
602 Secondary codec ID (0 = disable, default) 602 Secondary codec ID (0 = disable, default)
603 603
604 This module supports multiple cards. 604 This module supports multiple cards.
605 605
606 The power-management is supported. 606 The power-management is supported.
607 607
608 Module snd-cs46xx 608 Module snd-cs46xx
609 ----------------- 609 -----------------
610 610
611 Module for PCI sound cards based on CS4610/CS4 611 Module for PCI sound cards based on CS4610/CS4612/CS4614/CS4615/CS4622/
612 CS4624/CS4630/CS4280 PCI chips. 612 CS4624/CS4630/CS4280 PCI chips.
613 613
614 external_amp 614 external_amp
615 Force to enable external amplifier. 615 Force to enable external amplifier.
616 thinkpad 616 thinkpad
617 Force to enable Thinkpad's CLKRUN control. 617 Force to enable Thinkpad's CLKRUN control.
618 mmap_valid 618 mmap_valid
619 Support OSS mmap mode (default = 0). 619 Support OSS mmap mode (default = 0).
620 620
621 This module supports multiple cards and autopr 621 This module supports multiple cards and autoprobe.
622 Usually external amp and CLKRUN controls are d 622 Usually external amp and CLKRUN controls are detected automatically
623 from PCI sub vendor/device ids. If they don't 623 from PCI sub vendor/device ids. If they don't work, give the options
624 above explicitly. 624 above explicitly.
625 625
626 The power-management is supported. 626 The power-management is supported.
627 627
628 Module snd-cs5530 628 Module snd-cs5530
629 ----------------- 629 -----------------
630 630
631 Module for Cyrix/NatSemi Geode 5530 chip. 631 Module for Cyrix/NatSemi Geode 5530 chip.
632 632
633 Module snd-cs5535audio 633 Module snd-cs5535audio
634 ---------------------- 634 ----------------------
635 635
636 Module for multifunction CS5535 companion PCI 636 Module for multifunction CS5535 companion PCI device
637 637
638 The power-management is supported. 638 The power-management is supported.
639 639
640 Module snd-ctxfi 640 Module snd-ctxfi
641 ---------------- 641 ----------------
642 642
643 Module for Creative Sound Blaster X-Fi boards 643 Module for Creative Sound Blaster X-Fi boards (20k1 / 20k2 chips)
644 644
645 * Creative Sound Blaster X-Fi Titanium Fatal1t 645 * Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series
646 * Creative Sound Blaster X-Fi Titanium Fatal1t 646 * Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
647 * Creative Sound Blaster X-Fi Titanium Profess 647 * Creative Sound Blaster X-Fi Titanium Professional Audio
648 * Creative Sound Blaster X-Fi Titanium 648 * Creative Sound Blaster X-Fi Titanium
649 * Creative Sound Blaster X-Fi Elite Pro 649 * Creative Sound Blaster X-Fi Elite Pro
650 * Creative Sound Blaster X-Fi Platinum 650 * Creative Sound Blaster X-Fi Platinum
651 * Creative Sound Blaster X-Fi Fatal1ty 651 * Creative Sound Blaster X-Fi Fatal1ty
652 * Creative Sound Blaster X-Fi XtremeGamer 652 * Creative Sound Blaster X-Fi XtremeGamer
653 * Creative Sound Blaster X-Fi XtremeMusic 653 * Creative Sound Blaster X-Fi XtremeMusic
654 654
655 reference_rate 655 reference_rate
656 reference sample rate, 44100 or 48000 (def 656 reference sample rate, 44100 or 48000 (default)
657 multiple 657 multiple
658 multiple to ref. sample rate, 1 or 2 (defa 658 multiple to ref. sample rate, 1 or 2 (default)
659 subsystem 659 subsystem
660 override the PCI SSID for probing; 660 override the PCI SSID for probing;
661 the value consists of SSVID << 16 | SSDID. 661 the value consists of SSVID << 16 | SSDID.
662 The default is zero, which means no overri 662 The default is zero, which means no override.
663 663
664 This module supports multiple cards. 664 This module supports multiple cards.
665 665
666 Module snd-darla20 666 Module snd-darla20
667 ------------------ 667 ------------------
668 668
669 Module for Echoaudio Darla20 669 Module for Echoaudio Darla20
670 670
671 This module supports multiple cards. 671 This module supports multiple cards.
672 The driver requires the firmware loader suppor 672 The driver requires the firmware loader support on kernel.
673 673
674 Module snd-darla24 674 Module snd-darla24
675 ------------------ 675 ------------------
676 676
677 Module for Echoaudio Darla24 677 Module for Echoaudio Darla24
678 678
679 This module supports multiple cards. 679 This module supports multiple cards.
680 The driver requires the firmware loader suppor 680 The driver requires the firmware loader support on kernel.
681 681
682 Module snd-dt019x 682 Module snd-dt019x
683 ----------------- 683 -----------------
684 684
685 Module for Diamond Technologies DT-019X / Avan 685 Module for Diamond Technologies DT-019X / Avance Logic ALS-007 (PnP
686 only) 686 only)
687 687
688 This module supports multiple cards. This mod 688 This module supports multiple cards. This module is enabled only with
689 ISA PnP support. 689 ISA PnP support.
690 690
691 The power-management is supported. 691 The power-management is supported.
692 692
693 Module snd-dummy 693 Module snd-dummy
694 ---------------- 694 ----------------
695 695
696 Module for the dummy sound card. This "card" d 696 Module for the dummy sound card. This "card" doesn't do any output
697 or input, but you may use this module for any 697 or input, but you may use this module for any application which
698 requires a sound card (like RealPlayer). 698 requires a sound card (like RealPlayer).
699 699
700 pcm_devs 700 pcm_devs
701 Number of PCM devices assigned to each car 701 Number of PCM devices assigned to each card (default = 1, up to 4)
702 pcm_substreams 702 pcm_substreams
703 Number of PCM substreams assigned to each 703 Number of PCM substreams assigned to each PCM (default = 8, up to 128)
704 hrtimer 704 hrtimer
705 Use hrtimer (=1, default) or system timer 705 Use hrtimer (=1, default) or system timer (=0)
706 fake_buffer 706 fake_buffer
707 Fake buffer allocations (default = 1) 707 Fake buffer allocations (default = 1)
708 708
709 When multiple PCM devices are created, snd-dum 709 When multiple PCM devices are created, snd-dummy gives different
710 behavior to each PCM device: 710 behavior to each PCM device:
711 * 0 = interleaved with mmap support 711 * 0 = interleaved with mmap support
712 * 1 = non-interleaved with mmap support 712 * 1 = non-interleaved with mmap support
713 * 2 = interleaved without mmap 713 * 2 = interleaved without mmap
714 * 3 = non-interleaved without mmap 714 * 3 = non-interleaved without mmap
715 715
716 As default, snd-dummy drivers doesn't allocate 716 As default, snd-dummy drivers doesn't allocate the real buffers
717 but either ignores read/write or mmap a single 717 but either ignores read/write or mmap a single dummy page to all
718 buffer pages, in order to save the resources. 718 buffer pages, in order to save the resources. If your apps need
719 the read/ written buffer data to be consistent 719 the read/ written buffer data to be consistent, pass fake_buffer=0
720 option. 720 option.
721 721
722 The power-management is supported. 722 The power-management is supported.
723 723
724 Module snd-echo3g 724 Module snd-echo3g
725 ----------------- 725 -----------------
726 726
727 Module for Echoaudio 3G cards (Gina3G/Layla3G) 727 Module for Echoaudio 3G cards (Gina3G/Layla3G)
728 728
729 This module supports multiple cards. 729 This module supports multiple cards.
730 The driver requires the firmware loader suppor 730 The driver requires the firmware loader support on kernel.
731 731
732 Module snd-emu10k1 732 Module snd-emu10k1
733 ------------------ 733 ------------------
734 734
735 Module for EMU10K1/EMU10k2 based PCI sound car 735 Module for EMU10K1/EMU10k2 based PCI sound cards.
736 736
737 * Sound Blaster Live! 737 * Sound Blaster Live!
738 * Sound Blaster PCI 512 738 * Sound Blaster PCI 512
739 * Sound Blaster Audigy 739 * Sound Blaster Audigy
740 * E-MU APS (partially supported) 740 * E-MU APS (partially supported)
741 * E-MU DAS 741 * E-MU DAS
742 742
743 extin 743 extin
744 bitmap of available external inputs for FX 744 bitmap of available external inputs for FX8010 (see below)
745 extout 745 extout
746 bitmap of available external outputs for F 746 bitmap of available external outputs for FX8010 (see below)
747 seq_ports 747 seq_ports
748 allocated sequencer ports (4 by default) 748 allocated sequencer ports (4 by default)
749 max_synth_voices 749 max_synth_voices
750 limit of voices used for wavetable (64 by 750 limit of voices used for wavetable (64 by default)
751 max_buffer_size 751 max_buffer_size
752 specifies the maximum size of wavetable/pc 752 specifies the maximum size of wavetable/pcm buffers given in MB
753 unit. Default value is 128. 753 unit. Default value is 128.
754 enable_ir 754 enable_ir
755 enable IR 755 enable IR
756 756
757 This module supports multiple cards and autopr 757 This module supports multiple cards and autoprobe.
758 758
759 Input & Output configurations 759 Input & Output configurations [extin/extout]
760 * Creative Card wo/Digital out 760 * Creative Card wo/Digital out [0x0003/0x1f03]
761 * Creative Card w/Digital out 761 * Creative Card w/Digital out [0x0003/0x1f0f]
762 * Creative Card w/Digital CD in 762 * Creative Card w/Digital CD in [0x000f/0x1f0f]
763 * Creative Card wo/Digital out + LiveDrive 763 * Creative Card wo/Digital out + LiveDrive [0x3fc3/0x1fc3]
764 * Creative Card w/Digital out + LiveDrive 764 * Creative Card w/Digital out + LiveDrive [0x3fc3/0x1fcf]
765 * Creative Card w/Digital CD in + LiveDrive 765 * Creative Card w/Digital CD in + LiveDrive [0x3fcf/0x1fcf]
766 * Creative Card wo/Digital out + Digital I/O 2 766 * Creative Card wo/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
767 * Creative Card w/Digital out + Digital I/O 2 767 * Creative Card w/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
768 * Creative Card w/Digital CD in + Digital I/O 768 * Creative Card w/Digital CD in + Digital I/O 2 [0x0fcf/0x1f0f]
769 * Creative Card 5.1/w Digital out + LiveDrive 769 * Creative Card 5.1/w Digital out + LiveDrive [0x3fc3/0x1fff]
770 * Creative Card 5.1 (c) 2003 770 * Creative Card 5.1 (c) 2003 [0x3fc3/0x7cff]
771 * Creative Card all ins and outs 771 * Creative Card all ins and outs [0x3fff/0x7fff]
772 772
773 The power-management is supported. 773 The power-management is supported.
774 774
775 Module snd-emu10k1x 775 Module snd-emu10k1x
776 ------------------- 776 -------------------
777 777
778 Module for Creative Emu10k1X (SB Live Dell OEM 778 Module for Creative Emu10k1X (SB Live Dell OEM version)
779 779
780 This module supports multiple cards. 780 This module supports multiple cards.
781 781
782 Module snd-ens1370 782 Module snd-ens1370
783 ------------------ 783 ------------------
784 784
785 Module for Ensoniq AudioPCI ES1370 PCI sound c 785 Module for Ensoniq AudioPCI ES1370 PCI sound cards.
786 786
787 * SoundBlaster PCI 64 787 * SoundBlaster PCI 64
788 * SoundBlaster PCI 128 788 * SoundBlaster PCI 128
789 789
790 joystick 790 joystick
791 Enable joystick (default off) 791 Enable joystick (default off)
792 792
793 This module supports multiple cards and autopr 793 This module supports multiple cards and autoprobe.
794 794
795 The power-management is supported. 795 The power-management is supported.
796 796
797 Module snd-ens1371 797 Module snd-ens1371
798 ------------------ 798 ------------------
799 799
800 Module for Ensoniq AudioPCI ES1371 PCI sound c 800 Module for Ensoniq AudioPCI ES1371 PCI sound cards.
801 801
802 * SoundBlaster PCI 64 802 * SoundBlaster PCI 64
803 * SoundBlaster PCI 128 803 * SoundBlaster PCI 128
804 * SoundBlaster Vibra PCI 804 * SoundBlaster Vibra PCI
805 805
806 joystick_port 806 joystick_port
807 port # for joystick (0x200,0x208,0x210,0x2 807 port # for joystick (0x200,0x208,0x210,0x218), 0 = disable
808 (default), 1 = auto-detect 808 (default), 1 = auto-detect
809 809
810 This module supports multiple cards and autopr 810 This module supports multiple cards and autoprobe.
811 811
812 The power-management is supported. 812 The power-management is supported.
813 813
814 Module snd-es1688 814 Module snd-es1688
815 ----------------- 815 -----------------
816 816
817 Module for ESS AudioDrive ES-1688 and ES-688 s 817 Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
818 818
819 isapnp 819 isapnp
820 ISA PnP detection - 0 = disable, 1 = enabl 820 ISA PnP detection - 0 = disable, 1 = enable (default)
821 mpu_port 821 mpu_port
822 port # for MPU-401 port (0x300,0x310,0x320 822 port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
823 mpu_irq 823 mpu_irq
824 IRQ # for MPU-401 port (5,7,9,10) 824 IRQ # for MPU-401 port (5,7,9,10)
825 fm_port 825 fm_port
826 port # for OPL3 (option; share the same po 826 port # for OPL3 (option; share the same port as default)
827 827
828 with ``isapnp=0``, the following additional op 828 with ``isapnp=0``, the following additional options are available:
829 829
830 port 830 port
831 port # for ES-1688 chip (0x220,0x240,0x260 831 port # for ES-1688 chip (0x220,0x240,0x260)
832 irq 832 irq
833 IRQ # for ES-1688 chip (5,7,9,10) 833 IRQ # for ES-1688 chip (5,7,9,10)
834 dma8 834 dma8
835 DMA # for ES-1688 chip (0,1,3) 835 DMA # for ES-1688 chip (0,1,3)
836 836
837 This module supports multiple cards and autopr 837 This module supports multiple cards and autoprobe (without MPU-401 port)
838 and PnP with the ES968 chip. 838 and PnP with the ES968 chip.
839 839
840 Module snd-es18xx 840 Module snd-es18xx
841 ----------------- 841 -----------------
842 842
843 Module for ESS AudioDrive ES-18xx sound cards. 843 Module for ESS AudioDrive ES-18xx sound cards.
844 844
845 isapnp 845 isapnp
846 ISA PnP detection - 0 = disable, 1 = enabl 846 ISA PnP detection - 0 = disable, 1 = enable (default)
847 847
848 with ``isapnp=0``, the following options are a 848 with ``isapnp=0``, the following options are available:
849 849
850 port 850 port
851 port # for ES-18xx chip (0x220,0x240,0x260 851 port # for ES-18xx chip (0x220,0x240,0x260)
852 mpu_port 852 mpu_port
853 port # for MPU-401 port (0x300,0x310,0x320 853 port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
854 fm_port 854 fm_port
855 port # for FM (optional, not used) 855 port # for FM (optional, not used)
856 irq 856 irq
857 IRQ # for ES-18xx chip (5,7,9,10) 857 IRQ # for ES-18xx chip (5,7,9,10)
858 dma1 858 dma1
859 first DMA # for ES-18xx chip (0,1,3) 859 first DMA # for ES-18xx chip (0,1,3)
860 dma2 860 dma2
861 first DMA # for ES-18xx chip (0,1,3) 861 first DMA # for ES-18xx chip (0,1,3)
862 862
863 This module supports multiple cards, ISA PnP a 863 This module supports multiple cards, ISA PnP and autoprobe (without MPU-401
864 port if native ISA PnP routines are not used). 864 port if native ISA PnP routines are not used).
865 When ``dma2`` is equal with ``dma1``, the driv 865 When ``dma2`` is equal with ``dma1``, the driver works as half-duplex.
866 866
867 The power-management is supported. 867 The power-management is supported.
868 868
869 Module snd-es1938 869 Module snd-es1938
870 ----------------- 870 -----------------
871 871
872 Module for sound cards based on ESS Solo-1 (ES 872 Module for sound cards based on ESS Solo-1 (ES1938,ES1946) chips.
873 873
874 This module supports multiple cards and autopr 874 This module supports multiple cards and autoprobe.
875 875
876 The power-management is supported. 876 The power-management is supported.
877 877
878 Module snd-es1968 878 Module snd-es1968
879 ----------------- 879 -----------------
880 880
881 Module for sound cards based on ESS Maestro-1/ 881 Module for sound cards based on ESS Maestro-1/2/2E (ES1968/ES1978) chips.
882 882
883 total_bufsize 883 total_bufsize
884 total buffer size in kB (1-4096kB) 884 total buffer size in kB (1-4096kB)
885 pcm_substreams_p 885 pcm_substreams_p
886 playback channels (1-8, default=2) 886 playback channels (1-8, default=2)
887 pcm_substreams_c 887 pcm_substreams_c
888 capture channels (1-8, default=0) 888 capture channels (1-8, default=0)
889 clock 889 clock
890 clock (0 = auto-detection) 890 clock (0 = auto-detection)
891 use_pm 891 use_pm
892 support the power-management (0 = off, 1 = 892 support the power-management (0 = off, 1 = on, 2 = auto (default))
893 enable_mpu 893 enable_mpu
894 enable MPU401 (0 = off, 1 = on, 2 = auto ( 894 enable MPU401 (0 = off, 1 = on, 2 = auto (default))
895 joystick 895 joystick
896 enable joystick (default off) 896 enable joystick (default off)
897 897
898 This module supports multiple cards and autopr 898 This module supports multiple cards and autoprobe.
899 899
900 The power-management is supported. 900 The power-management is supported.
901 901
902 Module snd-fm801 902 Module snd-fm801
903 ---------------- 903 ----------------
904 904
905 Module for ForteMedia FM801 based PCI sound ca 905 Module for ForteMedia FM801 based PCI sound cards.
906 906
907 tea575x_tuner 907 tea575x_tuner
908 Enable TEA575x tuner; 908 Enable TEA575x tuner;
909 1 = MediaForte 256-PCS, 909 1 = MediaForte 256-PCS,
910 2 = MediaForte 256-PCPR, 910 2 = MediaForte 256-PCPR,
911 3 = MediaForte 64-PCR 911 3 = MediaForte 64-PCR
912 High 16-bits are video (radio) device numb 912 High 16-bits are video (radio) device number + 1;
913 example: 0x10002 (MediaForte 256-PCPR, dev 913 example: 0x10002 (MediaForte 256-PCPR, device 1)
914 914
915 This module supports multiple cards and autopr 915 This module supports multiple cards and autoprobe.
916 916
917 The power-management is supported. 917 The power-management is supported.
918 918
919 Module snd-gina20 919 Module snd-gina20
920 ----------------- 920 -----------------
921 921
922 Module for Echoaudio Gina20 922 Module for Echoaudio Gina20
923 923
924 This module supports multiple cards. 924 This module supports multiple cards.
925 The driver requires the firmware loader suppor 925 The driver requires the firmware loader support on kernel.
926 926
927 Module snd-gina24 927 Module snd-gina24
928 ----------------- 928 -----------------
929 929
930 Module for Echoaudio Gina24 930 Module for Echoaudio Gina24
931 931
932 This module supports multiple cards. 932 This module supports multiple cards.
933 The driver requires the firmware loader suppor 933 The driver requires the firmware loader support on kernel.
934 934
935 Module snd-gusclassic 935 Module snd-gusclassic
936 --------------------- 936 ---------------------
937 937
938 Module for Gravis UltraSound Classic sound car 938 Module for Gravis UltraSound Classic sound card.
939 939
940 port 940 port
941 port # for GF1 chip (0x220,0x230,0x240,0x2 941 port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
942 irq 942 irq
943 IRQ # for GF1 chip (3,5,9,11,12,15) 943 IRQ # for GF1 chip (3,5,9,11,12,15)
944 dma1 944 dma1
945 DMA # for GF1 chip (1,3,5,6,7) 945 DMA # for GF1 chip (1,3,5,6,7)
946 dma2 946 dma2
947 DMA # for GF1 chip (1,3,5,6,7,-1=disable) 947 DMA # for GF1 chip (1,3,5,6,7,-1=disable)
948 joystick_dac 948 joystick_dac
949 0 to 31, (0.59V-4.52V or 0.389V-2.98V) 949 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
950 voices 950 voices
951 GF1 voices limit (14-32) 951 GF1 voices limit (14-32)
952 pcm_voices 952 pcm_voices
953 reserved PCM voices 953 reserved PCM voices
954 954
955 This module supports multiple cards and autopr 955 This module supports multiple cards and autoprobe.
956 956
957 Module snd-gusextreme 957 Module snd-gusextreme
958 --------------------- 958 ---------------------
959 959
960 Module for Gravis UltraSound Extreme (Synergy 960 Module for Gravis UltraSound Extreme (Synergy ViperMax) sound card.
961 961
962 port 962 port
963 port # for ES-1688 chip (0x220,0x230,0x240 963 port # for ES-1688 chip (0x220,0x230,0x240,0x250,0x260)
964 gf1_port 964 gf1_port
965 port # for GF1 chip (0x210,0x220,0x230,0x2 965 port # for GF1 chip (0x210,0x220,0x230,0x240,0x250,0x260,0x270)
966 mpu_port 966 mpu_port
967 port # for MPU-401 port (0x300,0x310,0x320 967 port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable
968 irq 968 irq
969 IRQ # for ES-1688 chip (5,7,9,10) 969 IRQ # for ES-1688 chip (5,7,9,10)
970 gf1_irq 970 gf1_irq
971 IRQ # for GF1 chip (3,5,9,11,12,15) 971 IRQ # for GF1 chip (3,5,9,11,12,15)
972 mpu_irq 972 mpu_irq
973 IRQ # for MPU-401 port (5,7,9,10) 973 IRQ # for MPU-401 port (5,7,9,10)
974 dma8 974 dma8
975 DMA # for ES-1688 chip (0,1,3) 975 DMA # for ES-1688 chip (0,1,3)
976 dma1 976 dma1
977 DMA # for GF1 chip (1,3,5,6,7) 977 DMA # for GF1 chip (1,3,5,6,7)
978 joystick_dac 978 joystick_dac
979 0 to 31, (0.59V-4.52V or 0.389V-2.98V) 979 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
980 voices 980 voices
981 GF1 voices limit (14-32) 981 GF1 voices limit (14-32)
982 pcm_voices 982 pcm_voices
983 reserved PCM voices 983 reserved PCM voices
984 984
985 This module supports multiple cards and autopr 985 This module supports multiple cards and autoprobe (without MPU-401 port).
986 986
987 Module snd-gusmax 987 Module snd-gusmax
988 ----------------- 988 -----------------
989 989
990 Module for Gravis UltraSound MAX sound card. 990 Module for Gravis UltraSound MAX sound card.
991 991
992 port 992 port
993 port # for GF1 chip (0x220,0x230,0x240,0x2 993 port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
994 irq 994 irq
995 IRQ # for GF1 chip (3,5,9,11,12,15) 995 IRQ # for GF1 chip (3,5,9,11,12,15)
996 dma1 996 dma1
997 DMA # for GF1 chip (1,3,5,6,7) 997 DMA # for GF1 chip (1,3,5,6,7)
998 dma2 998 dma2
999 DMA # for GF1 chip (1,3,5,6,7,-1=disable) 999 DMA # for GF1 chip (1,3,5,6,7,-1=disable)
1000 joystick_dac 1000 joystick_dac
1001 0 to 31, (0.59V-4.52V or 0.389V-2.98V) 1001 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1002 voices 1002 voices
1003 GF1 voices limit (14-32) 1003 GF1 voices limit (14-32)
1004 pcm_voices 1004 pcm_voices
1005 reserved PCM voices 1005 reserved PCM voices
1006 1006
1007 This module supports multiple cards and autop 1007 This module supports multiple cards and autoprobe.
1008 1008
1009 Module snd-hda-intel 1009 Module snd-hda-intel
1010 -------------------- 1010 --------------------
1011 1011
1012 Module for Intel HD Audio (ICH6, ICH6M, ESB2, 1012 Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10,
1013 PCH, SCH), ATI SB450, SB600, R600, RS600, RS6 1013 PCH, SCH), ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620,
1014 RV630, RV635, RV670, RV770, VIA VT8251/VT8237 1014 RV630, RV635, RV670, RV770, VIA VT8251/VT8237A, SIS966, ULI M5461
1015 1015
1016 [Multiple options for each card instance] 1016 [Multiple options for each card instance]
1017 1017
1018 model 1018 model
1019 force the model name 1019 force the model name
1020 position_fix 1020 position_fix
1021 Fix DMA pointer; 1021 Fix DMA pointer;
1022 -1 = system default: choose appropriate o 1022 -1 = system default: choose appropriate one per controller hardware,
1023 0 = auto: falls back to LPIB when POSBUF 1023 0 = auto: falls back to LPIB when POSBUF doesn't work,
1024 1 = use LPIB, 1024 1 = use LPIB,
1025 2 = POSBUF: use position buffer, 1025 2 = POSBUF: use position buffer,
1026 3 = VIACOMBO: VIA-specific workaround for 1026 3 = VIACOMBO: VIA-specific workaround for capture,
1027 4 = COMBO: use LPIB for playback, auto fo 1027 4 = COMBO: use LPIB for playback, auto for capture stream
1028 5 = SKL+: apply the delay calculation ava 1028 5 = SKL+: apply the delay calculation available on recent Intel chips
1029 6 = FIFO: correct the position with the f 1029 6 = FIFO: correct the position with the fixed FIFO size, for recent AMD chips
1030 probe_mask 1030 probe_mask
1031 Bitmask to probe codecs (default = -1, me 1031 Bitmask to probe codecs (default = -1, meaning all slots);
1032 When the bit 8 (0x100) is set, the lower 1032 When the bit 8 (0x100) is set, the lower 8 bits are used
1033 as the "fixed" codec slots; i.e. the driv 1033 as the "fixed" codec slots; i.e. the driver probes the
1034 slots regardless what hardware reports ba 1034 slots regardless what hardware reports back
1035 probe_only 1035 probe_only
1036 Only probing and no codec initialization 1036 Only probing and no codec initialization (default=off);
1037 Useful to check the initial codec status 1037 Useful to check the initial codec status for debugging
1038 bdl_pos_adj 1038 bdl_pos_adj
1039 Specifies the DMA IRQ timing delay in sam 1039 Specifies the DMA IRQ timing delay in samples.
1040 Passing -1 will make the driver to choose 1040 Passing -1 will make the driver to choose the appropriate
1041 value based on the controller chip. 1041 value based on the controller chip.
1042 patch 1042 patch
1043 Specifies the early "patch" files to modi 1043 Specifies the early "patch" files to modify the HD-audio setup
1044 before initializing the codecs. 1044 before initializing the codecs.
1045 This option is available only when ``CONF 1045 This option is available only when ``CONFIG_SND_HDA_PATCH_LOADER=y``
1046 is set. See hd-audio/notes.rst for detai 1046 is set. See hd-audio/notes.rst for details.
1047 beep_mode 1047 beep_mode
1048 Selects the beep registration mode (0=off 1048 Selects the beep registration mode (0=off, 1=on);
1049 default value is set via ``CONFIG_SND_HDA 1049 default value is set via ``CONFIG_SND_HDA_INPUT_BEEP_MODE`` kconfig.
1050 1050
1051 [Single (global) options] 1051 [Single (global) options]
1052 1052
1053 single_cmd 1053 single_cmd
1054 Use single immediate commands to communic 1054 Use single immediate commands to communicate with codecs
1055 (for debugging only) 1055 (for debugging only)
1056 enable_msi 1056 enable_msi
1057 Enable Message Signaled Interrupt (MSI) ( 1057 Enable Message Signaled Interrupt (MSI) (default = off)
1058 power_save 1058 power_save
1059 Automatic power-saving timeout (in second 1059 Automatic power-saving timeout (in second, 0 = disable)
1060 power_save_controller 1060 power_save_controller
1061 Reset HD-audio controller in power-saving 1061 Reset HD-audio controller in power-saving mode (default = on)
1062 pm_blacklist <<
1063 Enable / disable power-management deny-li <<
1064 deny-list, 0 = skip PM deny-list, 1 = for <<
1065 align_buffer_size 1062 align_buffer_size
1066 Force rounding of buffer/period sizes to 1063 Force rounding of buffer/period sizes to multiples of 128 bytes.
1067 This is more efficient in terms of memory 1064 This is more efficient in terms of memory access but isn't
1068 required by the HDA spec and prevents use 1065 required by the HDA spec and prevents users from specifying
1069 exact period/buffer sizes. (default = on) 1066 exact period/buffer sizes. (default = on)
1070 snoop 1067 snoop
1071 Enable/disable snooping (default = on) 1068 Enable/disable snooping (default = on)
1072 1069
1073 This module supports multiple cards and autop 1070 This module supports multiple cards and autoprobe.
1074 1071
1075 See hd-audio/notes.rst for more details about 1072 See hd-audio/notes.rst for more details about HD-audio driver.
1076 1073
1077 Each codec may have a model table for differe 1074 Each codec may have a model table for different configurations.
1078 If your machine isn't listed there, the defau 1075 If your machine isn't listed there, the default (usually minimal)
1079 configuration is set up. You can pass ``mode 1076 configuration is set up. You can pass ``model=<name>`` option to
1080 specify a certain model in such a case. Ther 1077 specify a certain model in such a case. There are different
1081 models depending on the codec chip. The list 1078 models depending on the codec chip. The list of available models
1082 is found in hd-audio/models.rst. 1079 is found in hd-audio/models.rst.
1083 1080
1084 The model name ``generic`` is treated as a sp 1081 The model name ``generic`` is treated as a special case. When this
1085 model is given, the driver uses the generic c 1082 model is given, the driver uses the generic codec parser without
1086 "codec-patch". It's sometimes good for testi 1083 "codec-patch". It's sometimes good for testing and debugging.
1087 1084
1088 The model option can be used also for aliasin 1085 The model option can be used also for aliasing to another PCI or codec
1089 SSID. When it's passed in the form of ``mode 1086 SSID. When it's passed in the form of ``model=XXXX:YYYY`` where XXXX
1090 and YYYY are the sub-vendor and sub-device ID 1087 and YYYY are the sub-vendor and sub-device IDs in hex numbers,
1091 respectively, the driver will refer to that S 1088 respectively, the driver will refer to that SSID as a reference to the
1092 quirk table. 1089 quirk table.
1093 1090
1094 If the default configuration doesn't work and 1091 If the default configuration doesn't work and one of the above
1095 matches with your device, report it together 1092 matches with your device, report it together with alsa-info.sh
1096 output (with ``--no-upload`` option) to kerne 1093 output (with ``--no-upload`` option) to kernel bugzilla or alsa-devel
1097 ML (see the section `Links and Addresses`_). 1094 ML (see the section `Links and Addresses`_).
1098 1095
1099 ``power_save`` and ``power_save_controller`` 1096 ``power_save`` and ``power_save_controller`` options are for power-saving
1100 mode. See powersave.rst for details. 1097 mode. See powersave.rst for details.
1101 1098
1102 Note 2: If you get click noises on output, tr 1099 Note 2: If you get click noises on output, try the module option
1103 ``position_fix=1`` or ``2``. ``position_fix= 1100 ``position_fix=1`` or ``2``. ``position_fix=1`` will use the SD_LPIB
1104 register value without FIFO size correction a 1101 register value without FIFO size correction as the current
1105 DMA pointer. ``position_fix=2`` will make th 1102 DMA pointer. ``position_fix=2`` will make the driver to use
1106 the position buffer instead of reading SD_LPI 1103 the position buffer instead of reading SD_LPIB register.
1107 (Usually SD_LPIB register is more accurate th 1104 (Usually SD_LPIB register is more accurate than the
1108 position buffer.) 1105 position buffer.)
1109 1106
1110 ``position_fix=3`` is specific to VIA devices 1107 ``position_fix=3`` is specific to VIA devices. The position
1111 of the capture stream is checked from both LP 1108 of the capture stream is checked from both LPIB and POSBUF
1112 values. ``position_fix=4`` is a combination 1109 values. ``position_fix=4`` is a combination mode, using LPIB
1113 for playback and POSBUF for capture. 1110 for playback and POSBUF for capture.
1114 1111
1115 NB: If you get many ``azx_get_response timeou 1112 NB: If you get many ``azx_get_response timeout`` messages at
1116 loading, it's likely a problem of interrupts 1113 loading, it's likely a problem of interrupts (e.g. ACPI irq
1117 routing). Try to boot with options like ``pc 1114 routing). Try to boot with options like ``pci=noacpi``. Also, you
1118 can try ``single_cmd=1`` module option. This 1115 can try ``single_cmd=1`` module option. This will switch the
1119 communication method between HDA controller a 1116 communication method between HDA controller and codecs to the
1120 single immediate commands instead of CORB/RIR 1117 single immediate commands instead of CORB/RIRB. Basically, the
1121 single command mode is provided only for BIOS 1118 single command mode is provided only for BIOS, and you won't get
1122 unsolicited events, too. But, at least, this 1119 unsolicited events, too. But, at least, this works independently
1123 from the irq. Remember this is a last resort 1120 from the irq. Remember this is a last resort, and should be
1124 avoided as much as possible... 1121 avoided as much as possible...
1125 1122
1126 MORE NOTES ON ``azx_get_response timeout`` PR 1123 MORE NOTES ON ``azx_get_response timeout`` PROBLEMS:
1127 On some hardware, you may need to add a prope 1124 On some hardware, you may need to add a proper probe_mask option
1128 to avoid the ``azx_get_response timeout`` pro 1125 to avoid the ``azx_get_response timeout`` problem above, instead.
1129 This occurs when the access to non-existing o 1126 This occurs when the access to non-existing or non-working codec slot
1130 (likely a modem one) causes a stall of the co 1127 (likely a modem one) causes a stall of the communication via HD-audio
1131 bus. You can see which codec slots are probe 1128 bus. You can see which codec slots are probed by enabling
1132 ``CONFIG_SND_DEBUG_VERBOSE``, or simply from 1129 ``CONFIG_SND_DEBUG_VERBOSE``, or simply from the file name of the codec
1133 proc files. Then limit the slots to probe by 1130 proc files. Then limit the slots to probe by probe_mask option.
1134 For example, ``probe_mask=1`` means to probe 1131 For example, ``probe_mask=1`` means to probe only the first slot, and
1135 ``probe_mask=4`` means only the third slot. 1132 ``probe_mask=4`` means only the third slot.
1136 1133
1137 The power-management is supported. 1134 The power-management is supported.
1138 1135
1139 Module snd-hdsp 1136 Module snd-hdsp
1140 --------------- 1137 ---------------
1141 1138
1142 Module for RME Hammerfall DSP audio interface 1139 Module for RME Hammerfall DSP audio interface(s)
1143 1140
1144 This module supports multiple cards. 1141 This module supports multiple cards.
1145 1142
1146 Note: The firmware data can be automatically 1143 Note: The firmware data can be automatically loaded via hotplug
1147 when ``CONFIG_FW_LOADER`` is set. Otherwise, 1144 when ``CONFIG_FW_LOADER`` is set. Otherwise, you need to load
1148 the firmware via hdsploader utility included 1145 the firmware via hdsploader utility included in alsa-tools
1149 package. 1146 package.
1150 The firmware data is found in alsa-firmware p 1147 The firmware data is found in alsa-firmware package.
1151 1148
1152 Note: snd-page-alloc module does the job whic 1149 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1153 module did formerly. It will allocate the bu 1150 module did formerly. It will allocate the buffers in advance
1154 when any HDSP cards are found. To make the b 1151 when any HDSP cards are found. To make the buffer
1155 allocation sure, load snd-page-alloc module i 1152 allocation sure, load snd-page-alloc module in the early
1156 stage of boot sequence. See `Early Buffer Al 1153 stage of boot sequence. See `Early Buffer Allocation`_
1157 section. 1154 section.
1158 1155
1159 Module snd-hdspm 1156 Module snd-hdspm
1160 ---------------- 1157 ----------------
1161 1158
1162 Module for RME HDSP MADI board. 1159 Module for RME HDSP MADI board.
1163 1160
1164 precise_ptr 1161 precise_ptr
1165 Enable precise pointer, or disable. 1162 Enable precise pointer, or disable.
1166 line_outs_monitor 1163 line_outs_monitor
1167 Send playback streams to analog outs by d 1164 Send playback streams to analog outs by default.
1168 enable_monitor 1165 enable_monitor
1169 Enable Analog Out on Channel 63/64 by def 1166 Enable Analog Out on Channel 63/64 by default.
1170 1167
1171 See hdspm.rst for details. 1168 See hdspm.rst for details.
1172 1169
1173 Module snd-ice1712 1170 Module snd-ice1712
1174 ------------------ 1171 ------------------
1175 1172
1176 Module for Envy24 (ICE1712) based PCI sound c 1173 Module for Envy24 (ICE1712) based PCI sound cards.
1177 1174
1178 * MidiMan M Audio Delta 1010 1175 * MidiMan M Audio Delta 1010
1179 * MidiMan M Audio Delta 1010LT 1176 * MidiMan M Audio Delta 1010LT
1180 * MidiMan M Audio Delta DiO 2496 1177 * MidiMan M Audio Delta DiO 2496
1181 * MidiMan M Audio Delta 66 1178 * MidiMan M Audio Delta 66
1182 * MidiMan M Audio Delta 44 1179 * MidiMan M Audio Delta 44
1183 * MidiMan M Audio Delta 410 1180 * MidiMan M Audio Delta 410
1184 * MidiMan M Audio Audiophile 2496 1181 * MidiMan M Audio Audiophile 2496
1185 * TerraTec EWS 88MT 1182 * TerraTec EWS 88MT
1186 * TerraTec EWS 88D 1183 * TerraTec EWS 88D
1187 * TerraTec EWX 24/96 1184 * TerraTec EWX 24/96
1188 * TerraTec DMX 6Fire 1185 * TerraTec DMX 6Fire
1189 * TerraTec Phase 88 1186 * TerraTec Phase 88
1190 * Hoontech SoundTrack DSP 24 1187 * Hoontech SoundTrack DSP 24
1191 * Hoontech SoundTrack DSP 24 Value 1188 * Hoontech SoundTrack DSP 24 Value
1192 * Hoontech SoundTrack DSP 24 Media 7.1 1189 * Hoontech SoundTrack DSP 24 Media 7.1
1193 * Event Electronics, EZ8 1190 * Event Electronics, EZ8
1194 * Digigram VX442 1191 * Digigram VX442
1195 * Lionstracs, Mediastaton 1192 * Lionstracs, Mediastaton
1196 * Terrasoniq TS 88 1193 * Terrasoniq TS 88
1197 1194
1198 model 1195 model
1199 Use the given board model, one of the fol 1196 Use the given board model, one of the following:
1200 delta1010, dio2496, delta66, delta44, aud 1197 delta1010, dio2496, delta66, delta44, audiophile, delta410,
1201 delta1010lt, vx442, ewx2496, ews88mt, ews 1198 delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,
1202 dmx6fire, dsp24, dsp24_value, dsp24_71, e 1199 dmx6fire, dsp24, dsp24_value, dsp24_71, ez8,
1203 phase88, mediastation 1200 phase88, mediastation
1204 omni 1201 omni
1205 Omni I/O support for MidiMan M-Audio Delt 1202 Omni I/O support for MidiMan M-Audio Delta44/66
1206 cs8427_timeout 1203 cs8427_timeout
1207 reset timeout for the CS8427 chip (S/PDIF 1204 reset timeout for the CS8427 chip (S/PDIF transceiver) in msec
1208 resolution, default value is 500 (0.5 sec 1205 resolution, default value is 500 (0.5 sec)
1209 1206
1210 This module supports multiple cards and autop 1207 This module supports multiple cards and autoprobe.
1211 Note: The consumer part is not used with all 1208 Note: The consumer part is not used with all Envy24 based cards (for
1212 example in the MidiMan Delta siree). 1209 example in the MidiMan Delta siree).
1213 1210
1214 Note: The supported board is detected by read 1211 Note: The supported board is detected by reading EEPROM or PCI
1215 SSID (if EEPROM isn't available). You can ov 1212 SSID (if EEPROM isn't available). You can override the
1216 model by passing ``model`` module option in c 1213 model by passing ``model`` module option in case that the
1217 driver isn't configured properly or you want 1214 driver isn't configured properly or you want to try another
1218 type for testing. 1215 type for testing.
1219 1216
1220 Module snd-ice1724 1217 Module snd-ice1724
1221 ------------------ 1218 ------------------
1222 1219
1223 Module for Envy24HT (VT/ICE1724), Envy24PT (V 1220 Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
1224 1221
1225 * MidiMan M Audio Revolution 5.1 1222 * MidiMan M Audio Revolution 5.1
1226 * MidiMan M Audio Revolution 7.1 1223 * MidiMan M Audio Revolution 7.1
1227 * MidiMan M Audio Audiophile 192 1224 * MidiMan M Audio Audiophile 192
1228 * AMP Ltd AUDIO2000 1225 * AMP Ltd AUDIO2000
1229 * TerraTec Aureon 5.1 Sky 1226 * TerraTec Aureon 5.1 Sky
1230 * TerraTec Aureon 7.1 Space 1227 * TerraTec Aureon 7.1 Space
1231 * TerraTec Aureon 7.1 Universe 1228 * TerraTec Aureon 7.1 Universe
1232 * TerraTec Phase 22 1229 * TerraTec Phase 22
1233 * TerraTec Phase 28 1230 * TerraTec Phase 28
1234 * AudioTrak Prodigy 7.1 1231 * AudioTrak Prodigy 7.1
1235 * AudioTrak Prodigy 7.1 LT 1232 * AudioTrak Prodigy 7.1 LT
1236 * AudioTrak Prodigy 7.1 XT 1233 * AudioTrak Prodigy 7.1 XT
1237 * AudioTrak Prodigy 7.1 HIFI 1234 * AudioTrak Prodigy 7.1 HIFI
1238 * AudioTrak Prodigy 7.1 HD2 1235 * AudioTrak Prodigy 7.1 HD2
1239 * AudioTrak Prodigy 192 1236 * AudioTrak Prodigy 192
1240 * Pontis MS300 1237 * Pontis MS300
1241 * Albatron K8X800 Pro II 1238 * Albatron K8X800 Pro II
1242 * Chaintech ZNF3-150 1239 * Chaintech ZNF3-150
1243 * Chaintech ZNF3-250 1240 * Chaintech ZNF3-250
1244 * Chaintech 9CJS 1241 * Chaintech 9CJS
1245 * Chaintech AV-710 1242 * Chaintech AV-710
1246 * Shuttle SN25P 1243 * Shuttle SN25P
1247 * Onkyo SE-90PCI 1244 * Onkyo SE-90PCI
1248 * Onkyo SE-200PCI 1245 * Onkyo SE-200PCI
1249 * ESI Juli@ 1246 * ESI Juli@
1250 * ESI Maya44 1247 * ESI Maya44
1251 * Hercules Fortissimo IV 1248 * Hercules Fortissimo IV
1252 * EGO-SYS WaveTerminal 192M 1249 * EGO-SYS WaveTerminal 192M
1253 1250
1254 model 1251 model
1255 Use the given board model, one of the fol 1252 Use the given board model, one of the following:
1256 revo51, revo71, amp2000, prodigy71, prodi 1253 revo51, revo71, amp2000, prodigy71, prodigy71lt,
1257 prodigy71xt, prodigy71hifi, prodigyhd2, p 1254 prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
1258 juli, aureon51, aureon71, universe, ap192 1255 juli, aureon51, aureon71, universe, ap192, k8x800,
1259 phase22, phase28, ms300, av710, se200pci, 1256 phase22, phase28, ms300, av710, se200pci, se90pci,
1260 fortissimo4, sn25p, WT192M, maya44 1257 fortissimo4, sn25p, WT192M, maya44
1261 1258
1262 This module supports multiple cards and autop 1259 This module supports multiple cards and autoprobe.
1263 1260
1264 Note: The supported board is detected by read 1261 Note: The supported board is detected by reading EEPROM or PCI
1265 SSID (if EEPROM isn't available). You can ov 1262 SSID (if EEPROM isn't available). You can override the
1266 model by passing ``model`` module option in c 1263 model by passing ``model`` module option in case that the
1267 driver isn't configured properly or you want 1264 driver isn't configured properly or you want to try another
1268 type for testing. 1265 type for testing.
1269 1266
1270 Module snd-indigo 1267 Module snd-indigo
1271 ----------------- 1268 -----------------
1272 1269
1273 Module for Echoaudio Indigo 1270 Module for Echoaudio Indigo
1274 1271
1275 This module supports multiple cards. 1272 This module supports multiple cards.
1276 The driver requires the firmware loader suppo 1273 The driver requires the firmware loader support on kernel.
1277 1274
1278 Module snd-indigodj 1275 Module snd-indigodj
1279 ------------------- 1276 -------------------
1280 1277
1281 Module for Echoaudio Indigo DJ 1278 Module for Echoaudio Indigo DJ
1282 1279
1283 This module supports multiple cards. 1280 This module supports multiple cards.
1284 The driver requires the firmware loader suppo 1281 The driver requires the firmware loader support on kernel.
1285 1282
1286 Module snd-indigoio 1283 Module snd-indigoio
1287 ------------------- 1284 -------------------
1288 1285
1289 Module for Echoaudio Indigo IO 1286 Module for Echoaudio Indigo IO
1290 1287
1291 This module supports multiple cards. 1288 This module supports multiple cards.
1292 The driver requires the firmware loader suppo 1289 The driver requires the firmware loader support on kernel.
1293 1290
1294 Module snd-intel8x0 1291 Module snd-intel8x0
1295 ------------------- 1292 -------------------
1296 1293
1297 Module for AC'97 motherboards from Intel and 1294 Module for AC'97 motherboards from Intel and compatibles.
1298 1295
1299 * Intel i810/810E, i815, i820, i830, i84x, MX 1296 * Intel i810/810E, i815, i820, i830, i84x, MX440 ICH5, ICH6, ICH7,
1300 6300ESB, ESB2 1297 6300ESB, ESB2
1301 * SiS 7012 (SiS 735) 1298 * SiS 7012 (SiS 735)
1302 * NVidia NForce, NForce2, NForce3, MCP04, CK8 1299 * NVidia NForce, NForce2, NForce3, MCP04, CK804 CK8, CK8S, MCP501
1303 * AMD AMD768, AMD8111 1300 * AMD AMD768, AMD8111
1304 * ALi m5455 1301 * ALi m5455
1305 1302
1306 ac97_clock 1303 ac97_clock
1307 AC'97 codec clock base (0 = auto-detect) 1304 AC'97 codec clock base (0 = auto-detect)
1308 ac97_quirk 1305 ac97_quirk
1309 AC'97 workaround for strange hardware; 1306 AC'97 workaround for strange hardware;
1310 See `AC97 Quirk Option`_ section below. 1307 See `AC97 Quirk Option`_ section below.
1311 buggy_irq 1308 buggy_irq
1312 Enable workaround for buggy interrupts on 1309 Enable workaround for buggy interrupts on some motherboards
1313 (default yes on nForce chips, otherwise o 1310 (default yes on nForce chips, otherwise off)
1314 buggy_semaphore 1311 buggy_semaphore
1315 Enable workaround for hardware with buggy 1312 Enable workaround for hardware with buggy semaphores (e.g. on some
1316 ASUS laptops) (default off) 1313 ASUS laptops) (default off)
1317 spdif_aclink 1314 spdif_aclink
1318 Use S/PDIF over AC-link instead of direct 1315 Use S/PDIF over AC-link instead of direct connection from the
1319 controller chip (0 = off, 1 = on, -1 = de 1316 controller chip (0 = off, 1 = on, -1 = default)
1320 1317
1321 This module supports one chip and autoprobe. 1318 This module supports one chip and autoprobe.
1322 1319
1323 Note: the latest driver supports auto-detecti 1320 Note: the latest driver supports auto-detection of chip clock.
1324 if you still encounter too fast playback, spe 1321 if you still encounter too fast playback, specify the clock
1325 explicitly via the module option ``ac97_clock 1322 explicitly via the module option ``ac97_clock=41194``.
1326 1323
1327 Joystick/MIDI ports are not supported by this 1324 Joystick/MIDI ports are not supported by this driver. If your
1328 motherboard has these devices, use the ns558 1325 motherboard has these devices, use the ns558 or snd-mpu401
1329 modules, respectively. 1326 modules, respectively.
1330 1327
1331 The power-management is supported. 1328 The power-management is supported.
1332 1329
1333 Module snd-intel8x0m 1330 Module snd-intel8x0m
1334 -------------------- 1331 --------------------
1335 1332
1336 Module for Intel ICH (i8x0) chipset MC97 mode 1333 Module for Intel ICH (i8x0) chipset MC97 modems.
1337 1334
1338 * Intel i810/810E, i815, i820, i830, i84x, MX 1335 * Intel i810/810E, i815, i820, i830, i84x, MX440 ICH5, ICH6, ICH7
1339 * SiS 7013 (SiS 735) 1336 * SiS 7013 (SiS 735)
1340 * NVidia NForce, NForce2, NForce2s, NForce3 1337 * NVidia NForce, NForce2, NForce2s, NForce3
1341 * AMD AMD8111 1338 * AMD AMD8111
1342 * ALi m5455 1339 * ALi m5455
1343 1340
1344 ac97_clock 1341 ac97_clock
1345 AC'97 codec clock base (0 = auto-detect) 1342 AC'97 codec clock base (0 = auto-detect)
1346 1343
1347 This module supports one card and autoprobe. 1344 This module supports one card and autoprobe.
1348 1345
1349 Note: The default index value of this module 1346 Note: The default index value of this module is -2, i.e. the first
1350 slot is excluded. 1347 slot is excluded.
1351 1348
1352 The power-management is supported. 1349 The power-management is supported.
1353 1350
1354 Module snd-interwave 1351 Module snd-interwave
1355 -------------------- 1352 --------------------
1356 1353
1357 Module for Gravis UltraSound PnP, Dynasonic 3 1354 Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32
1358 and other sound cards based on AMD InterWave 1355 and other sound cards based on AMD InterWave (tm) chip.
1359 1356
1360 joystick_dac 1357 joystick_dac
1361 0 to 31, (0.59V-4.52V or 0.389V-2.98V) 1358 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1362 midi 1359 midi
1363 1 = MIDI UART enable, 0 = MIDI UART disab 1360 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1364 pcm_voices 1361 pcm_voices
1365 reserved PCM voices for the synthesizer ( 1362 reserved PCM voices for the synthesizer (default 2)
1366 effect 1363 effect
1367 1 = InterWave effects enable (default 0); 1364 1 = InterWave effects enable (default 0); requires 8 voices
1368 isapnp 1365 isapnp
1369 ISA PnP detection - 0 = disable, 1 = enab 1366 ISA PnP detection - 0 = disable, 1 = enable (default)
1370 1367
1371 with ``isapnp=0``, the following options are 1368 with ``isapnp=0``, the following options are available:
1372 1369
1373 port 1370 port
1374 port # for InterWave chip (0x210,0x220,0x 1371 port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1375 irq 1372 irq
1376 IRQ # for InterWave chip (3,5,9,11,12,15) 1373 IRQ # for InterWave chip (3,5,9,11,12,15)
1377 dma1 1374 dma1
1378 DMA # for InterWave chip (0,1,3,5,6,7) 1375 DMA # for InterWave chip (0,1,3,5,6,7)
1379 dma2 1376 dma2
1380 DMA # for InterWave chip (0,1,3,5,6,7,-1= 1377 DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1381 1378
1382 This module supports multiple cards, autoprob 1379 This module supports multiple cards, autoprobe and ISA PnP.
1383 1380
1384 Module snd-interwave-stb 1381 Module snd-interwave-stb
1385 ------------------------ 1382 ------------------------
1386 1383
1387 Module for UltraSound 32-Pro (sound card from 1384 Module for UltraSound 32-Pro (sound card from STB used by Compaq)
1388 and other sound cards based on AMD InterWave 1385 and other sound cards based on AMD InterWave (tm) chip with TEA6330T
1389 circuit for extended control of bass, treble 1386 circuit for extended control of bass, treble and master volume.
1390 1387
1391 joystick_dac 1388 joystick_dac
1392 0 to 31, (0.59V-4.52V or 0.389V-2.98V) 1389 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1393 midi 1390 midi
1394 1 = MIDI UART enable, 0 = MIDI UART disab 1391 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1395 pcm_voices 1392 pcm_voices
1396 reserved PCM voices for the synthesizer ( 1393 reserved PCM voices for the synthesizer (default 2)
1397 effect 1394 effect
1398 1 = InterWave effects enable (default 0); 1395 1 = InterWave effects enable (default 0); requires 8 voices
1399 isapnp 1396 isapnp
1400 ISA PnP detection - 0 = disable, 1 = enab 1397 ISA PnP detection - 0 = disable, 1 = enable (default)
1401 1398
1402 with ``isapnp=0``, the following options are 1399 with ``isapnp=0``, the following options are available:
1403 1400
1404 port 1401 port
1405 port # for InterWave chip (0x210,0x220,0x 1402 port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1406 port_tc 1403 port_tc
1407 tone control (i2c bus) port # for TEA6330 1404 tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380)
1408 irq 1405 irq
1409 IRQ # for InterWave chip (3,5,9,11,12,15) 1406 IRQ # for InterWave chip (3,5,9,11,12,15)
1410 dma1 1407 dma1
1411 DMA # for InterWave chip (0,1,3,5,6,7) 1408 DMA # for InterWave chip (0,1,3,5,6,7)
1412 dma2 1409 dma2
1413 DMA # for InterWave chip (0,1,3,5,6,7,-1= 1410 DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1414 1411
1415 This module supports multiple cards, autoprob 1412 This module supports multiple cards, autoprobe and ISA PnP.
1416 1413
1417 Module snd-jazz16 1414 Module snd-jazz16
1418 ------------------- 1415 -------------------
1419 1416
1420 Module for Media Vision Jazz16 chipset. The c 1417 Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips:
1421 MVD1216 + MVA416 + MVA514. 1418 MVD1216 + MVA416 + MVA514.
1422 1419
1423 port 1420 port
1424 port # for SB DSP chip (0x210,0x220,0x230 1421 port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260)
1425 irq 1422 irq
1426 IRQ # for SB DSP chip (3,5,7,9,10,15) 1423 IRQ # for SB DSP chip (3,5,7,9,10,15)
1427 dma8 1424 dma8
1428 DMA # for SB DSP chip (1,3) 1425 DMA # for SB DSP chip (1,3)
1429 dma16 1426 dma16
1430 DMA # for SB DSP chip (5,7) 1427 DMA # for SB DSP chip (5,7)
1431 mpu_port 1428 mpu_port
1432 MPU-401 port # (0x300,0x310,0x320,0x330) 1429 MPU-401 port # (0x300,0x310,0x320,0x330)
1433 mpu_irq 1430 mpu_irq
1434 MPU-401 irq # (2,3,5,7) 1431 MPU-401 irq # (2,3,5,7)
1435 1432
1436 This module supports multiple cards. 1433 This module supports multiple cards.
1437 1434
1438 Module snd-korg1212 1435 Module snd-korg1212
1439 ------------------- 1436 -------------------
1440 1437
1441 Module for Korg 1212 IO PCI card 1438 Module for Korg 1212 IO PCI card
1442 1439
1443 This module supports multiple cards. 1440 This module supports multiple cards.
1444 1441
1445 Module snd-layla20 1442 Module snd-layla20
1446 ------------------ 1443 ------------------
1447 1444
1448 Module for Echoaudio Layla20 1445 Module for Echoaudio Layla20
1449 1446
1450 This module supports multiple cards. 1447 This module supports multiple cards.
1451 The driver requires the firmware loader suppo 1448 The driver requires the firmware loader support on kernel.
1452 1449
1453 Module snd-layla24 1450 Module snd-layla24
1454 ------------------ 1451 ------------------
1455 1452
1456 Module for Echoaudio Layla24 1453 Module for Echoaudio Layla24
1457 1454
1458 This module supports multiple cards. 1455 This module supports multiple cards.
1459 The driver requires the firmware loader suppo 1456 The driver requires the firmware loader support on kernel.
1460 1457
1461 Module snd-lola 1458 Module snd-lola
1462 --------------- 1459 ---------------
1463 1460
1464 Module for Digigram Lola PCI-e boards 1461 Module for Digigram Lola PCI-e boards
1465 1462
1466 This module supports multiple cards. 1463 This module supports multiple cards.
1467 1464
1468 Module snd-lx6464es 1465 Module snd-lx6464es
1469 ------------------- 1466 -------------------
1470 1467
1471 Module for Digigram LX6464ES boards 1468 Module for Digigram LX6464ES boards
1472 1469
1473 This module supports multiple cards. 1470 This module supports multiple cards.
1474 1471
1475 Module snd-maestro3 1472 Module snd-maestro3
1476 ------------------- 1473 -------------------
1477 1474
1478 Module for Allegro/Maestro3 chips 1475 Module for Allegro/Maestro3 chips
1479 1476
1480 external_amp 1477 external_amp
1481 enable external amp (enabled by default) 1478 enable external amp (enabled by default)
1482 amp_gpio 1479 amp_gpio
1483 GPIO pin number for external amp (0-15) o 1480 GPIO pin number for external amp (0-15) or -1 for default pin (8
1484 for allegro, 1 for others) 1481 for allegro, 1 for others)
1485 1482
1486 This module supports autoprobe and multiple c 1483 This module supports autoprobe and multiple chips.
1487 1484
1488 Note: the binding of amplifier is dependent o 1485 Note: the binding of amplifier is dependent on hardware.
1489 If there is no sound even though all channels 1486 If there is no sound even though all channels are unmuted, try to
1490 specify other gpio connection via amp_gpio op 1487 specify other gpio connection via amp_gpio option.
1491 For example, a Panasonic notebook might need 1488 For example, a Panasonic notebook might need ``amp_gpio=0x0d``
1492 option. 1489 option.
1493 1490
1494 The power-management is supported. 1491 The power-management is supported.
1495 1492
1496 Module snd-mia 1493 Module snd-mia
1497 --------------- 1494 ---------------
1498 1495
1499 Module for Echoaudio Mia 1496 Module for Echoaudio Mia
1500 1497
1501 This module supports multiple cards. 1498 This module supports multiple cards.
1502 The driver requires the firmware loader suppo 1499 The driver requires the firmware loader support on kernel.
1503 1500
1504 Module snd-miro 1501 Module snd-miro
1505 --------------- 1502 ---------------
1506 1503
1507 Module for Miro soundcards: miroSOUND PCM 1 p 1504 Module for Miro soundcards: miroSOUND PCM 1 pro, miroSOUND PCM 12,
1508 miroSOUND PCM 20 Radio. 1505 miroSOUND PCM 20 Radio.
1509 1506
1510 port 1507 port
1511 Port # (0x530,0x604,0xe80,0xf40) 1508 Port # (0x530,0x604,0xe80,0xf40)
1512 irq 1509 irq
1513 IRQ # (5,7,9,10,11) 1510 IRQ # (5,7,9,10,11)
1514 dma1 1511 dma1
1515 1st dma # (0,1,3) 1512 1st dma # (0,1,3)
1516 dma2 1513 dma2
1517 2nd dma # (0,1) 1514 2nd dma # (0,1)
1518 mpu_port 1515 mpu_port
1519 MPU-401 port # (0x300,0x310,0x320,0x330) 1516 MPU-401 port # (0x300,0x310,0x320,0x330)
1520 mpu_irq 1517 mpu_irq
1521 MPU-401 irq # (5,7,9,10) 1518 MPU-401 irq # (5,7,9,10)
1522 fm_port 1519 fm_port
1523 FM Port # (0x388) 1520 FM Port # (0x388)
1524 wss 1521 wss
1525 enable WSS mode 1522 enable WSS mode
1526 ide 1523 ide
1527 enable onboard ide support 1524 enable onboard ide support
1528 1525
1529 Module snd-mixart 1526 Module snd-mixart
1530 ----------------- 1527 -----------------
1531 1528
1532 Module for Digigram miXart8 sound cards. 1529 Module for Digigram miXart8 sound cards.
1533 1530
1534 This module supports multiple cards. 1531 This module supports multiple cards.
1535 Note: One miXart8 board will be represented a 1532 Note: One miXart8 board will be represented as 4 alsa cards.
1536 See Documentation/sound/cards/mixart.rst for 1533 See Documentation/sound/cards/mixart.rst for details.
1537 1534
1538 When the driver is compiled as a module and t 1535 When the driver is compiled as a module and the hotplug firmware
1539 is supported, the firmware data is loaded via 1536 is supported, the firmware data is loaded via hotplug automatically.
1540 Install the necessary firmware files in alsa- 1537 Install the necessary firmware files in alsa-firmware package.
1541 When no hotplug fw loader is available, you n 1538 When no hotplug fw loader is available, you need to load the
1542 firmware via mixartloader utility in alsa-too 1539 firmware via mixartloader utility in alsa-tools package.
1543 1540
1544 Module snd-mona 1541 Module snd-mona
1545 --------------- 1542 ---------------
1546 1543
1547 Module for Echoaudio Mona 1544 Module for Echoaudio Mona
1548 1545
1549 This module supports multiple cards. 1546 This module supports multiple cards.
1550 The driver requires the firmware loader suppo 1547 The driver requires the firmware loader support on kernel.
1551 1548
1552 Module snd-mpu401 1549 Module snd-mpu401
1553 ----------------- 1550 -----------------
1554 1551
1555 Module for MPU-401 UART devices. 1552 Module for MPU-401 UART devices.
1556 1553
1557 port 1554 port
1558 port number or -1 (disable) 1555 port number or -1 (disable)
1559 irq 1556 irq
1560 IRQ number or -1 (disable) 1557 IRQ number or -1 (disable)
1561 pnp 1558 pnp
1562 PnP detection - 0 = disable, 1 = enable ( 1559 PnP detection - 0 = disable, 1 = enable (default)
1563 1560
1564 This module supports multiple devices and PnP 1561 This module supports multiple devices and PnP.
1565 1562
1566 Module snd-msnd-classic 1563 Module snd-msnd-classic
1567 ----------------------- 1564 -----------------------
1568 1565
1569 Module for Turtle Beach MultiSound Classic, T 1566 Module for Turtle Beach MultiSound Classic, Tahiti or Monterey
1570 soundcards. 1567 soundcards.
1571 1568
1572 io 1569 io
1573 Port # for msnd-classic card 1570 Port # for msnd-classic card
1574 irq 1571 irq
1575 IRQ # for msnd-classic card 1572 IRQ # for msnd-classic card
1576 mem 1573 mem
1577 Memory address (0xb0000, 0xc8000, 0xd0000 1574 Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000)
1578 write_ndelay 1575 write_ndelay
1579 enable write ndelay (default = 1) 1576 enable write ndelay (default = 1)
1580 calibrate_signal 1577 calibrate_signal
1581 calibrate signal (default = 0) 1578 calibrate signal (default = 0)
1582 isapnp 1579 isapnp
1583 ISA PnP detection - 0 = disable, 1 = enab 1580 ISA PnP detection - 0 = disable, 1 = enable (default)
1584 digital 1581 digital
1585 Digital daughterboard present (default = 1582 Digital daughterboard present (default = 0)
1586 cfg 1583 cfg
1587 Config port (0x250, 0x260 or 0x270) defau 1584 Config port (0x250, 0x260 or 0x270) default = PnP
1588 reset 1585 reset
1589 Reset all devices 1586 Reset all devices
1590 mpu_io 1587 mpu_io
1591 MPU401 I/O port 1588 MPU401 I/O port
1592 mpu_irq 1589 mpu_irq
1593 MPU401 irq# 1590 MPU401 irq#
1594 ide_io0 1591 ide_io0
1595 IDE port #0 1592 IDE port #0
1596 ide_io1 1593 ide_io1
1597 IDE port #1 1594 IDE port #1
1598 ide_irq 1595 ide_irq
1599 IDE irq# 1596 IDE irq#
1600 joystick_io 1597 joystick_io
1601 Joystick I/O port 1598 Joystick I/O port
1602 1599
1603 The driver requires firmware files ``turtlebe 1600 The driver requires firmware files ``turtlebeach/msndinit.bin`` and
1604 ``turtlebeach/msndperm.bin`` in the proper fi 1601 ``turtlebeach/msndperm.bin`` in the proper firmware directory.
1605 1602
1606 See Documentation/sound/cards/multisound.sh f 1603 See Documentation/sound/cards/multisound.sh for important information
1607 about this driver. Note that it has been dis 1604 about this driver. Note that it has been discontinued, but the
1608 Voyetra Turtle Beach knowledge base entry for 1605 Voyetra Turtle Beach knowledge base entry for it is still available
1609 at 1606 at
1610 https://www.turtlebeach.com 1607 https://www.turtlebeach.com
1611 1608
1612 Module snd-msnd-pinnacle 1609 Module snd-msnd-pinnacle
1613 ------------------------ 1610 ------------------------
1614 1611
1615 Module for Turtle Beach MultiSound Pinnacle/F 1612 Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards.
1616 1613
1617 io 1614 io
1618 Port # for pinnacle/fiji card 1615 Port # for pinnacle/fiji card
1619 irq 1616 irq
1620 IRQ # for pinnalce/fiji card 1617 IRQ # for pinnalce/fiji card
1621 mem 1618 mem
1622 Memory address (0xb0000, 0xc8000, 0xd0000 1619 Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000)
1623 write_ndelay 1620 write_ndelay
1624 enable write ndelay (default = 1) 1621 enable write ndelay (default = 1)
1625 calibrate_signal 1622 calibrate_signal
1626 calibrate signal (default = 0) 1623 calibrate signal (default = 0)
1627 isapnp 1624 isapnp
1628 ISA PnP detection - 0 = disable, 1 = enab 1625 ISA PnP detection - 0 = disable, 1 = enable (default)
1629 1626
1630 The driver requires firmware files ``turtlebe 1627 The driver requires firmware files ``turtlebeach/pndspini.bin`` and
1631 ``turtlebeach/pndsperm.bin`` in the proper fi 1628 ``turtlebeach/pndsperm.bin`` in the proper firmware directory.
1632 1629
1633 Module snd-mtpav 1630 Module snd-mtpav
1634 ---------------- 1631 ----------------
1635 1632
1636 Module for MOTU MidiTimePiece AV multiport MI 1633 Module for MOTU MidiTimePiece AV multiport MIDI (on the parallel
1637 port). 1634 port).
1638 1635
1639 port 1636 port
1640 I/O port # for MTPAV (0x378,0x278, defaul 1637 I/O port # for MTPAV (0x378,0x278, default=0x378)
1641 irq 1638 irq
1642 IRQ # for MTPAV (7,5, default=7) 1639 IRQ # for MTPAV (7,5, default=7)
1643 hwports 1640 hwports
1644 number of supported hardware ports, defau 1641 number of supported hardware ports, default=8.
1645 1642
1646 Module supports only 1 card. This module has 1643 Module supports only 1 card. This module has no enable option.
1647 1644
1648 Module snd-mts64 1645 Module snd-mts64
1649 ---------------- 1646 ----------------
1650 1647
1651 Module for Ego Systems (ESI) Miditerminal 414 1648 Module for Ego Systems (ESI) Miditerminal 4140
1652 1649
1653 This module supports multiple devices. 1650 This module supports multiple devices.
1654 Requires parport (``CONFIG_PARPORT``). 1651 Requires parport (``CONFIG_PARPORT``).
1655 1652
1656 Module snd-nm256 1653 Module snd-nm256
1657 ---------------- 1654 ----------------
1658 1655
1659 Module for NeoMagic NM256AV/ZX chips 1656 Module for NeoMagic NM256AV/ZX chips
1660 1657
1661 playback_bufsize 1658 playback_bufsize
1662 max playback frame size in kB (4-128kB) 1659 max playback frame size in kB (4-128kB)
1663 capture_bufsize 1660 capture_bufsize
1664 max capture frame size in kB (4-128kB) 1661 max capture frame size in kB (4-128kB)
1665 force_ac97 1662 force_ac97
1666 0 or 1 (disabled by default) 1663 0 or 1 (disabled by default)
1667 buffer_top 1664 buffer_top
1668 specify buffer top address 1665 specify buffer top address
1669 use_cache 1666 use_cache
1670 0 or 1 (disabled by default) 1667 0 or 1 (disabled by default)
1671 vaio_hack 1668 vaio_hack
1672 alias buffer_top=0x25a800 1669 alias buffer_top=0x25a800
1673 reset_workaround 1670 reset_workaround
1674 enable AC97 RESET workaround for some lap 1671 enable AC97 RESET workaround for some laptops
1675 reset_workaround2 1672 reset_workaround2
1676 enable extended AC97 RESET workaround for 1673 enable extended AC97 RESET workaround for some other laptops
1677 1674
1678 This module supports one chip and autoprobe. 1675 This module supports one chip and autoprobe.
1679 1676
1680 The power-management is supported. 1677 The power-management is supported.
1681 1678
1682 Note: on some notebooks the buffer address ca 1679 Note: on some notebooks the buffer address cannot be detected
1683 automatically, or causes hang-up during initi 1680 automatically, or causes hang-up during initialization.
1684 In such a case, specify the buffer top addres 1681 In such a case, specify the buffer top address explicitly via
1685 the buffer_top option. 1682 the buffer_top option.
1686 For example, 1683 For example,
1687 Sony F250: buffer_top=0x25a800 1684 Sony F250: buffer_top=0x25a800
1688 Sony F270: buffer_top=0x272800 1685 Sony F270: buffer_top=0x272800
1689 The driver supports only ac97 codec. It's po 1686 The driver supports only ac97 codec. It's possible to force
1690 to initialize/use ac97 although it's not dete 1687 to initialize/use ac97 although it's not detected. In such a
1691 case, use ``force_ac97=1`` option - but *NO* 1688 case, use ``force_ac97=1`` option - but *NO* guarantee whether it
1692 works! 1689 works!
1693 1690
1694 Note: The NM256 chip can be linked internally 1691 Note: The NM256 chip can be linked internally with non-AC97
1695 codecs. This driver supports only the AC97 c 1692 codecs. This driver supports only the AC97 codec, and won't work
1696 with machines with other (most likely CS423x 1693 with machines with other (most likely CS423x or OPL3SAx) chips,
1697 even though the device is detected in lspci. 1694 even though the device is detected in lspci. In such a case, try
1698 other drivers, e.g. snd-cs4232 or snd-opl3sa2 1695 other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP
1699 but some doesn't have ISA PnP. You'll need t 1696 but some doesn't have ISA PnP. You'll need to specify ``isapnp=0``
1700 and proper hardware parameters in the case wi 1697 and proper hardware parameters in the case without ISA PnP.
1701 1698
1702 Note: some laptops need a workaround for AC97 1699 Note: some laptops need a workaround for AC97 RESET. For the
1703 known hardware like Dell Latitude LS and Sony 1700 known hardware like Dell Latitude LS and Sony PCG-F305, this
1704 workaround is enabled automatically. For oth 1701 workaround is enabled automatically. For other laptops with a
1705 hard freeze, you can try ``reset_workaround=1 1702 hard freeze, you can try ``reset_workaround=1`` option.
1706 1703
1707 Note: Dell Latitude CSx laptops have another 1704 Note: Dell Latitude CSx laptops have another problem regarding
1708 AC97 RESET. On these laptops, reset_workarou 1705 AC97 RESET. On these laptops, reset_workaround2 option is
1709 turned on as default. This option is worth t 1706 turned on as default. This option is worth to try if the
1710 previous reset_workaround option doesn't help 1707 previous reset_workaround option doesn't help.
1711 1708
1712 Note: This driver is really crappy. It's a p 1709 Note: This driver is really crappy. It's a porting from the
1713 OSS driver, which is a result of black-magic 1710 OSS driver, which is a result of black-magic reverse engineering.
1714 The detection of codec will fail if the drive 1711 The detection of codec will fail if the driver is loaded *after*
1715 X-server as described above. You might be ab 1712 X-server as described above. You might be able to force to load
1716 the module, but it may result in hang-up. H 1713 the module, but it may result in hang-up. Hence, make sure that
1717 you load this module *before* X if you encoun 1714 you load this module *before* X if you encounter this kind of
1718 problem. 1715 problem.
1719 1716
1720 Module snd-opl3sa2 1717 Module snd-opl3sa2
1721 ------------------ 1718 ------------------
1722 1719
1723 Module for Yamaha OPL3-SA2/SA3 sound cards. 1720 Module for Yamaha OPL3-SA2/SA3 sound cards.
1724 1721
1725 isapnp 1722 isapnp
1726 ISA PnP detection - 0 = disable, 1 = enab 1723 ISA PnP detection - 0 = disable, 1 = enable (default)
1727 1724
1728 with ``isapnp=0``, the following options are 1725 with ``isapnp=0``, the following options are available:
1729 1726
1730 port 1727 port
1731 control port # for OPL3-SA chip (0x370) 1728 control port # for OPL3-SA chip (0x370)
1732 sb_port 1729 sb_port
1733 SB port # for OPL3-SA chip (0x220,0x240) 1730 SB port # for OPL3-SA chip (0x220,0x240)
1734 wss_port 1731 wss_port
1735 WSS port # for OPL3-SA chip (0x530,0xe80, 1732 WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604)
1736 midi_port 1733 midi_port
1737 port # for MPU-401 UART (0x300,0x330), -1 1734 port # for MPU-401 UART (0x300,0x330), -1 = disable
1738 fm_port 1735 fm_port
1739 FM port # for OPL3-SA chip (0x388), -1 = 1736 FM port # for OPL3-SA chip (0x388), -1 = disable
1740 irq 1737 irq
1741 IRQ # for OPL3-SA chip (5,7,9,10) 1738 IRQ # for OPL3-SA chip (5,7,9,10)
1742 dma1 1739 dma1
1743 first DMA # for Yamaha OPL3-SA chip (0,1, 1740 first DMA # for Yamaha OPL3-SA chip (0,1,3)
1744 dma2 1741 dma2
1745 second DMA # for Yamaha OPL3-SA chip (0,1 1742 second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
1746 1743
1747 This module supports multiple cards and ISA P 1744 This module supports multiple cards and ISA PnP. It does not support
1748 autoprobe (if ISA PnP is not used) thus all p 1745 autoprobe (if ISA PnP is not used) thus all ports must be specified!!!
1749 1746
1750 The power-management is supported. 1747 The power-management is supported.
1751 1748
1752 Module snd-opti92x-ad1848 1749 Module snd-opti92x-ad1848
1753 ------------------------- 1750 -------------------------
1754 1751
1755 Module for sound cards based on OPTi 82c92x a 1752 Module for sound cards based on OPTi 82c92x and Analog Devices AD1848 chips.
1756 Module works with OAK Mozart cards as well. 1753 Module works with OAK Mozart cards as well.
1757 1754
1758 isapnp 1755 isapnp
1759 ISA PnP detection - 0 = disable, 1 = enab 1756 ISA PnP detection - 0 = disable, 1 = enable (default)
1760 1757
1761 with ``isapnp=0``, the following options are 1758 with ``isapnp=0``, the following options are available:
1762 1759
1763 port 1760 port
1764 port # for WSS chip (0x530,0xe80,0xf40,0x 1761 port # for WSS chip (0x530,0xe80,0xf40,0x604)
1765 mpu_port 1762 mpu_port
1766 port # for MPU-401 UART (0x300,0x310,0x32 1763 port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1767 fm_port 1764 fm_port
1768 port # for OPL3 device (0x388) 1765 port # for OPL3 device (0x388)
1769 irq 1766 irq
1770 IRQ # for WSS chip (5,7,9,10,11) 1767 IRQ # for WSS chip (5,7,9,10,11)
1771 mpu_irq 1768 mpu_irq
1772 IRQ # for MPU-401 UART (5,7,9,10) 1769 IRQ # for MPU-401 UART (5,7,9,10)
1773 dma1 1770 dma1
1774 first DMA # for WSS chip (0,1,3) 1771 first DMA # for WSS chip (0,1,3)
1775 1772
1776 This module supports only one card, autoprobe 1773 This module supports only one card, autoprobe and PnP.
1777 1774
1778 Module snd-opti92x-cs4231 1775 Module snd-opti92x-cs4231
1779 ------------------------- 1776 -------------------------
1780 1777
1781 Module for sound cards based on OPTi 82c92x a 1778 Module for sound cards based on OPTi 82c92x and Crystal CS4231 chips.
1782 1779
1783 isapnp 1780 isapnp
1784 ISA PnP detection - 0 = disable, 1 = enab 1781 ISA PnP detection - 0 = disable, 1 = enable (default)
1785 1782
1786 with ``isapnp=0``, the following options are 1783 with ``isapnp=0``, the following options are available:
1787 1784
1788 port 1785 port
1789 port # for WSS chip (0x530,0xe80,0xf40,0x 1786 port # for WSS chip (0x530,0xe80,0xf40,0x604)
1790 mpu_port 1787 mpu_port
1791 port # for MPU-401 UART (0x300,0x310,0x32 1788 port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1792 fm_port 1789 fm_port
1793 port # for OPL3 device (0x388) 1790 port # for OPL3 device (0x388)
1794 irq 1791 irq
1795 IRQ # for WSS chip (5,7,9,10,11) 1792 IRQ # for WSS chip (5,7,9,10,11)
1796 mpu_irq 1793 mpu_irq
1797 IRQ # for MPU-401 UART (5,7,9,10) 1794 IRQ # for MPU-401 UART (5,7,9,10)
1798 dma1 1795 dma1
1799 first DMA # for WSS chip (0,1,3) 1796 first DMA # for WSS chip (0,1,3)
1800 dma2 1797 dma2
1801 second DMA # for WSS chip (0,1,3) 1798 second DMA # for WSS chip (0,1,3)
1802 1799
1803 This module supports only one card, autoprobe 1800 This module supports only one card, autoprobe and PnP.
1804 1801
1805 Module snd-opti93x 1802 Module snd-opti93x
1806 ------------------ 1803 ------------------
1807 1804
1808 Module for sound cards based on OPTi 82c93x c 1805 Module for sound cards based on OPTi 82c93x chips.
1809 1806
1810 isapnp 1807 isapnp
1811 ISA PnP detection - 0 = disable, 1 = enab 1808 ISA PnP detection - 0 = disable, 1 = enable (default)
1812 1809
1813 with ``isapnp=0``, the following options are 1810 with ``isapnp=0``, the following options are available:
1814 1811
1815 port 1812 port
1816 port # for WSS chip (0x530,0xe80,0xf40,0x 1813 port # for WSS chip (0x530,0xe80,0xf40,0x604)
1817 mpu_port 1814 mpu_port
1818 port # for MPU-401 UART (0x300,0x310,0x32 1815 port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1819 fm_port 1816 fm_port
1820 port # for OPL3 device (0x388) 1817 port # for OPL3 device (0x388)
1821 irq 1818 irq
1822 IRQ # for WSS chip (5,7,9,10,11) 1819 IRQ # for WSS chip (5,7,9,10,11)
1823 mpu_irq 1820 mpu_irq
1824 IRQ # for MPU-401 UART (5,7,9,10) 1821 IRQ # for MPU-401 UART (5,7,9,10)
1825 dma1 1822 dma1
1826 first DMA # for WSS chip (0,1,3) 1823 first DMA # for WSS chip (0,1,3)
1827 dma2 1824 dma2
1828 second DMA # for WSS chip (0,1,3) 1825 second DMA # for WSS chip (0,1,3)
1829 1826
1830 This module supports only one card, autoprobe 1827 This module supports only one card, autoprobe and PnP.
1831 1828
1832 Module snd-oxygen 1829 Module snd-oxygen
1833 ----------------- 1830 -----------------
1834 1831
1835 Module for sound cards based on the C-Media C 1832 Module for sound cards based on the C-Media CMI8786/8787/8788 chip:
1836 1833
1837 * Asound A-8788 1834 * Asound A-8788
1838 * Asus Xonar DG/DGX 1835 * Asus Xonar DG/DGX
1839 * AuzenTech X-Meridian 1836 * AuzenTech X-Meridian
1840 * AuzenTech X-Meridian 2G 1837 * AuzenTech X-Meridian 2G
1841 * Bgears b-Enspirer 1838 * Bgears b-Enspirer
1842 * Club3D Theatron DTS 1839 * Club3D Theatron DTS
1843 * HT-Omega Claro (plus) 1840 * HT-Omega Claro (plus)
1844 * HT-Omega Claro halo (XT) 1841 * HT-Omega Claro halo (XT)
1845 * Kuroutoshikou CMI8787-HG2PCI 1842 * Kuroutoshikou CMI8787-HG2PCI
1846 * Razer Barracuda AC-1 1843 * Razer Barracuda AC-1
1847 * Sondigo Inferno 1844 * Sondigo Inferno
1848 * TempoTec HiFier Fantasia 1845 * TempoTec HiFier Fantasia
1849 * TempoTec HiFier Serenade 1846 * TempoTec HiFier Serenade
1850 1847
1851 This module supports autoprobe and multiple c 1848 This module supports autoprobe and multiple cards.
1852 1849
1853 Module snd-pcsp 1850 Module snd-pcsp
1854 --------------- 1851 ---------------
1855 1852
1856 Module for internal PC-Speaker. 1853 Module for internal PC-Speaker.
1857 1854
1858 nopcm 1855 nopcm
1859 Disable PC-Speaker PCM sound. Only beeps 1856 Disable PC-Speaker PCM sound. Only beeps remain.
1860 nforce_wa 1857 nforce_wa
1861 enable NForce chipset workaround. Expect 1858 enable NForce chipset workaround. Expect bad sound.
1862 1859
1863 This module supports system beeps, some kind 1860 This module supports system beeps, some kind of PCM playback and
1864 even a few mixer controls. 1861 even a few mixer controls.
1865 1862
1866 Module snd-pcxhr 1863 Module snd-pcxhr
1867 ---------------- 1864 ----------------
1868 1865
1869 Module for Digigram PCXHR boards 1866 Module for Digigram PCXHR boards
1870 1867
1871 This module supports multiple cards. 1868 This module supports multiple cards.
1872 1869
1873 Module snd-portman2x4 1870 Module snd-portman2x4
1874 --------------------- 1871 ---------------------
1875 1872
1876 Module for Midiman Portman 2x4 parallel port 1873 Module for Midiman Portman 2x4 parallel port MIDI interface
1877 1874
1878 This module supports multiple cards. 1875 This module supports multiple cards.
1879 1876
1880 Module snd-powermac (on ppc only) 1877 Module snd-powermac (on ppc only)
1881 --------------------------------- 1878 ---------------------------------
1882 1879
1883 Module for PowerMac, iMac and iBook on-board 1880 Module for PowerMac, iMac and iBook on-board soundchips
1884 1881
1885 enable_beep 1882 enable_beep
1886 enable beep using PCM (enabled as default 1883 enable beep using PCM (enabled as default)
1887 1884
1888 Module supports autoprobe a chip. 1885 Module supports autoprobe a chip.
1889 1886
1890 Note: the driver may have problems regarding 1887 Note: the driver may have problems regarding endianness.
1891 1888
1892 The power-management is supported. 1889 The power-management is supported.
1893 1890
1894 Module snd-pxa2xx-ac97 (on arm only) 1891 Module snd-pxa2xx-ac97 (on arm only)
1895 ------------------------------------ 1892 ------------------------------------
1896 1893
1897 Module for AC97 driver for the Intel PXA2xx c 1894 Module for AC97 driver for the Intel PXA2xx chip
1898 1895
1899 For ARM architecture only. 1896 For ARM architecture only.
1900 1897
1901 The power-management is supported. 1898 The power-management is supported.
1902 1899
1903 Module snd-riptide 1900 Module snd-riptide
1904 ------------------ 1901 ------------------
1905 1902
1906 Module for Conexant Riptide chip 1903 Module for Conexant Riptide chip
1907 1904
1908 joystick_port 1905 joystick_port
1909 Joystick port # (default: 0x200) 1906 Joystick port # (default: 0x200)
1910 mpu_port 1907 mpu_port
1911 MPU401 port # (default: 0x330) 1908 MPU401 port # (default: 0x330)
1912 opl3_port 1909 opl3_port
1913 OPL3 port # (default: 0x388) 1910 OPL3 port # (default: 0x388)
1914 1911
1915 This module supports multiple cards. 1912 This module supports multiple cards.
1916 The driver requires the firmware loader suppo 1913 The driver requires the firmware loader support on kernel.
1917 You need to install the firmware file ``ripti 1914 You need to install the firmware file ``riptide.hex`` to the standard
1918 firmware path (e.g. /lib/firmware). 1915 firmware path (e.g. /lib/firmware).
1919 1916
1920 Module snd-rme32 1917 Module snd-rme32
1921 ---------------- 1918 ----------------
1922 1919
1923 Module for RME Digi32, Digi32 Pro and Digi32/ 1920 Module for RME Digi32, Digi32 Pro and Digi32/8 (Sek'd Prodif32,
1924 Prodif96 and Prodif Gold) sound cards. 1921 Prodif96 and Prodif Gold) sound cards.
1925 1922
1926 This module supports multiple cards. 1923 This module supports multiple cards.
1927 1924
1928 Module snd-rme96 1925 Module snd-rme96
1929 ---------------- 1926 ----------------
1930 1927
1931 Module for RME Digi96, Digi96/8 and Digi96/8 1928 Module for RME Digi96, Digi96/8 and Digi96/8 PRO/PAD/PST sound cards.
1932 1929
1933 This module supports multiple cards. 1930 This module supports multiple cards.
1934 1931
1935 Module snd-rme9652 1932 Module snd-rme9652
1936 ------------------ 1933 ------------------
1937 1934
1938 Module for RME Digi9652 (Hammerfall, Hammerfa 1935 Module for RME Digi9652 (Hammerfall, Hammerfall-Light) sound cards.
1939 1936
1940 precise_ptr 1937 precise_ptr
1941 Enable precise pointer (doesn't work reli 1938 Enable precise pointer (doesn't work reliably). (default = 0)
1942 1939
1943 This module supports multiple cards. 1940 This module supports multiple cards.
1944 1941
1945 Note: snd-page-alloc module does the job whic 1942 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1946 module did formerly. It will allocate the bu 1943 module did formerly. It will allocate the buffers in advance
1947 when any RME9652 cards are found. To make th 1944 when any RME9652 cards are found. To make the buffer
1948 allocation sure, load snd-page-alloc module i 1945 allocation sure, load snd-page-alloc module in the early
1949 stage of boot sequence. See `Early Buffer Al 1946 stage of boot sequence. See `Early Buffer Allocation`_
1950 section. 1947 section.
1951 1948
1952 Module snd-sa11xx-uda1341 (on arm only) 1949 Module snd-sa11xx-uda1341 (on arm only)
1953 --------------------------------------- 1950 ---------------------------------------
1954 1951
1955 Module for Philips UDA1341TS on Compaq iPAQ H 1952 Module for Philips UDA1341TS on Compaq iPAQ H3600 sound card.
1956 1953
1957 Module supports only one card. 1954 Module supports only one card.
1958 Module has no enable and index options. 1955 Module has no enable and index options.
1959 1956
1960 The power-management is supported. 1957 The power-management is supported.
1961 1958
1962 Module snd-sb8 1959 Module snd-sb8
1963 -------------- 1960 --------------
1964 1961
1965 Module for 8-bit SoundBlaster cards: SoundBla 1962 Module for 8-bit SoundBlaster cards: SoundBlaster 1.0, SoundBlaster 2.0,
1966 SoundBlaster Pro 1963 SoundBlaster Pro
1967 1964
1968 port 1965 port
1969 port # for SB DSP chip (0x220,0x240,0x260 1966 port # for SB DSP chip (0x220,0x240,0x260)
1970 irq 1967 irq
1971 IRQ # for SB DSP chip (5,7,9,10) 1968 IRQ # for SB DSP chip (5,7,9,10)
1972 dma8 1969 dma8
1973 DMA # for SB DSP chip (1,3) 1970 DMA # for SB DSP chip (1,3)
1974 1971
1975 This module supports multiple cards and autop 1972 This module supports multiple cards and autoprobe.
1976 1973
1977 The power-management is supported. 1974 The power-management is supported.
1978 1975
1979 Module snd-sb16 and snd-sbawe 1976 Module snd-sb16 and snd-sbawe
1980 ----------------------------- 1977 -----------------------------
1981 1978
1982 Module for 16-bit SoundBlaster cards: SoundBl 1979 Module for 16-bit SoundBlaster cards: SoundBlaster 16 (PnP),
1983 SoundBlaster AWE 32 (PnP), SoundBlaster AWE 6 1980 SoundBlaster AWE 32 (PnP), SoundBlaster AWE 64 PnP
1984 1981
1985 mic_agc 1982 mic_agc
1986 Mic Auto-Gain-Control - 0 = disable, 1 = 1983 Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
1987 csp 1984 csp
1988 ASP/CSP chip support - 0 = disable (defau 1985 ASP/CSP chip support - 0 = disable (default), 1 = enable
1989 isapnp 1986 isapnp
1990 ISA PnP detection - 0 = disable, 1 = enab 1987 ISA PnP detection - 0 = disable, 1 = enable (default)
1991 1988
1992 with isapnp=0, the following options are avai 1989 with isapnp=0, the following options are available:
1993 1990
1994 port 1991 port
1995 port # for SB DSP 4.x chip (0x220,0x240,0 1992 port # for SB DSP 4.x chip (0x220,0x240,0x260)
1996 mpu_port 1993 mpu_port
1997 port # for MPU-401 UART (0x300,0x330), -1 1994 port # for MPU-401 UART (0x300,0x330), -1 = disable
1998 awe_port 1995 awe_port
1999 base port # for EMU8000 synthesizer (0x62 1996 base port # for EMU8000 synthesizer (0x620,0x640,0x660) (snd-sbawe
2000 module only) 1997 module only)
2001 irq 1998 irq
2002 IRQ # for SB DSP 4.x chip (5,7,9,10) 1999 IRQ # for SB DSP 4.x chip (5,7,9,10)
2003 dma8 2000 dma8
2004 8-bit DMA # for SB DSP 4.x chip (0,1,3) 2001 8-bit DMA # for SB DSP 4.x chip (0,1,3)
2005 dma16 2002 dma16
2006 16-bit DMA # for SB DSP 4.x chip (5,6,7) 2003 16-bit DMA # for SB DSP 4.x chip (5,6,7)
2007 2004
2008 This module supports multiple cards, autoprob 2005 This module supports multiple cards, autoprobe and ISA PnP.
2009 2006
2010 Note: To use Vibra16X cards in 16-bit half du 2007 Note: To use Vibra16X cards in 16-bit half duplex mode, you must
2011 disable 16bit DMA with dma16 = -1 module para 2008 disable 16bit DMA with dma16 = -1 module parameter.
2012 Also, all Sound Blaster 16 type cards can ope 2009 Also, all Sound Blaster 16 type cards can operate in 16-bit
2013 half duplex mode through 8-bit DMA channel by 2010 half duplex mode through 8-bit DMA channel by disabling their
2014 16-bit DMA channel. 2011 16-bit DMA channel.
2015 2012
2016 The power-management is supported. 2013 The power-management is supported.
2017 2014
2018 Module snd-sc6000 2015 Module snd-sc6000
2019 ----------------- 2016 -----------------
2020 2017
2021 Module for Gallant SC-6000 soundcard and late 2018 Module for Gallant SC-6000 soundcard and later models: SC-6600 and
2022 SC-7000. 2019 SC-7000.
2023 2020
2024 port 2021 port
2025 Port # (0x220 or 0x240) 2022 Port # (0x220 or 0x240)
2026 mss_port 2023 mss_port
2027 MSS Port # (0x530 or 0xe80) 2024 MSS Port # (0x530 or 0xe80)
2028 irq 2025 irq
2029 IRQ # (5,7,9,10,11) 2026 IRQ # (5,7,9,10,11)
2030 mpu_irq 2027 mpu_irq
2031 MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 2028 MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq
2032 dma 2029 dma
2033 DMA # (1,3,0) 2030 DMA # (1,3,0)
2034 joystick 2031 joystick
2035 Enable gameport - 0 = disable (default), 2032 Enable gameport - 0 = disable (default), 1 = enable
2036 2033
2037 This module supports multiple cards. 2034 This module supports multiple cards.
2038 2035
2039 This card is also known as Audio Excel DSP 16 2036 This card is also known as Audio Excel DSP 16 or Zoltrix AV302.
2040 2037
2041 Module snd-sscape 2038 Module snd-sscape
2042 ----------------- 2039 -----------------
2043 2040
2044 Module for ENSONIQ SoundScape cards. 2041 Module for ENSONIQ SoundScape cards.
2045 2042
2046 port 2043 port
2047 Port # (PnP setup) 2044 Port # (PnP setup)
2048 wss_port 2045 wss_port
2049 WSS Port # (PnP setup) 2046 WSS Port # (PnP setup)
2050 irq 2047 irq
2051 IRQ # (PnP setup) 2048 IRQ # (PnP setup)
2052 mpu_irq 2049 mpu_irq
2053 MPU-401 IRQ # (PnP setup) 2050 MPU-401 IRQ # (PnP setup)
2054 dma 2051 dma
2055 DMA # (PnP setup) 2052 DMA # (PnP setup)
2056 dma2 2053 dma2
2057 2nd DMA # (PnP setup, -1 to disable) 2054 2nd DMA # (PnP setup, -1 to disable)
2058 joystick 2055 joystick
2059 Enable gameport - 0 = disable (default), 2056 Enable gameport - 0 = disable (default), 1 = enable
2060 2057
2061 This module supports multiple cards. 2058 This module supports multiple cards.
2062 2059
2063 The driver requires the firmware loader suppo 2060 The driver requires the firmware loader support on kernel.
2064 2061
2065 Module snd-sun-amd7930 (on sparc only) 2062 Module snd-sun-amd7930 (on sparc only)
2066 -------------------------------------- 2063 --------------------------------------
2067 2064
2068 Module for AMD7930 sound chips found on Sparc 2065 Module for AMD7930 sound chips found on Sparcs.
2069 2066
2070 This module supports multiple cards. 2067 This module supports multiple cards.
2071 2068
2072 Module snd-sun-cs4231 (on sparc only) 2069 Module snd-sun-cs4231 (on sparc only)
2073 ------------------------------------- 2070 -------------------------------------
2074 2071
2075 Module for CS4231 sound chips found on Sparcs 2072 Module for CS4231 sound chips found on Sparcs.
2076 2073
2077 This module supports multiple cards. 2074 This module supports multiple cards.
2078 2075
2079 Module snd-sun-dbri (on sparc only) 2076 Module snd-sun-dbri (on sparc only)
2080 ----------------------------------- 2077 -----------------------------------
2081 2078
2082 Module for DBRI sound chips found on Sparcs. 2079 Module for DBRI sound chips found on Sparcs.
2083 2080
2084 This module supports multiple cards. 2081 This module supports multiple cards.
2085 2082
2086 Module snd-wavefront 2083 Module snd-wavefront
2087 -------------------- 2084 --------------------
2088 2085
2089 Module for Turtle Beach Maui, Tropez and Trop 2086 Module for Turtle Beach Maui, Tropez and Tropez+ sound cards.
2090 2087
2091 use_cs4232_midi 2088 use_cs4232_midi
2092 Use CS4232 MPU-401 interface 2089 Use CS4232 MPU-401 interface
2093 (inaccessibly located inside your compute 2090 (inaccessibly located inside your computer)
2094 isapnp 2091 isapnp
2095 ISA PnP detection - 0 = disable, 1 = enab 2092 ISA PnP detection - 0 = disable, 1 = enable (default)
2096 2093
2097 with isapnp=0, the following options are avai 2094 with isapnp=0, the following options are available:
2098 2095
2099 cs4232_pcm_port 2096 cs4232_pcm_port
2100 Port # for CS4232 PCM interface. 2097 Port # for CS4232 PCM interface.
2101 cs4232_pcm_irq 2098 cs4232_pcm_irq
2102 IRQ # for CS4232 PCM interface (5,7,9,11, 2099 IRQ # for CS4232 PCM interface (5,7,9,11,12,15).
2103 cs4232_mpu_port 2100 cs4232_mpu_port
2104 Port # for CS4232 MPU-401 interface. 2101 Port # for CS4232 MPU-401 interface.
2105 cs4232_mpu_irq 2102 cs4232_mpu_irq
2106 IRQ # for CS4232 MPU-401 interface (9,11, 2103 IRQ # for CS4232 MPU-401 interface (9,11,12,15).
2107 ics2115_port 2104 ics2115_port
2108 Port # for ICS2115 2105 Port # for ICS2115
2109 ics2115_irq 2106 ics2115_irq
2110 IRQ # for ICS2115 2107 IRQ # for ICS2115
2111 fm_port 2108 fm_port
2112 FM OPL-3 Port # 2109 FM OPL-3 Port #
2113 dma1 2110 dma1
2114 DMA1 # for CS4232 PCM interface. 2111 DMA1 # for CS4232 PCM interface.
2115 dma2 2112 dma2
2116 DMA2 # for CS4232 PCM interface. 2113 DMA2 # for CS4232 PCM interface.
2117 2114
2118 The below are options for wavefront_synth fea 2115 The below are options for wavefront_synth features:
2119 2116
2120 wf_raw 2117 wf_raw
2121 Assume that we need to boot the OS (defau 2118 Assume that we need to boot the OS (default:no);
2122 If yes, then during driver loading, the s 2119 If yes, then during driver loading, the state of the board is
2123 ignored, and we reset the board and load 2120 ignored, and we reset the board and load the firmware anyway.
2124 fx_raw 2121 fx_raw
2125 Assume that the FX process needs help (de 2122 Assume that the FX process needs help (default:yes);
2126 If false, we'll leave the FX processor in 2123 If false, we'll leave the FX processor in whatever state it is
2127 when the driver is loaded. The default i 2124 when the driver is loaded. The default is to download the
2128 microprogram and associated coefficients 2125 microprogram and associated coefficients to set it up for
2129 "default" operation, whatever that means. 2126 "default" operation, whatever that means.
2130 debug_default 2127 debug_default
2131 Debug parameters for card initialization 2128 Debug parameters for card initialization
2132 wait_usecs 2129 wait_usecs
2133 How long to wait without sleeping, usecs 2130 How long to wait without sleeping, usecs (default:150);
2134 This magic number seems to give pretty op 2131 This magic number seems to give pretty optimal throughput
2135 based on my limited experimentation. 2132 based on my limited experimentation.
2136 If you want to play around with it and fi 2133 If you want to play around with it and find a better value, be
2137 my guest. Remember, the idea is to get a 2134 my guest. Remember, the idea is to get a number that causes us
2138 to just busy wait for as many WaveFront c 2135 to just busy wait for as many WaveFront commands as possible,
2139 without coming up with a number so large 2136 without coming up with a number so large that we hog the whole
2140 CPU. 2137 CPU.
2141 Specifically, with this number, out of ab 2138 Specifically, with this number, out of about 134,000 status
2142 waits, only about 250 result in a sleep. 2139 waits, only about 250 result in a sleep.
2143 sleep_interval 2140 sleep_interval
2144 How long to sleep when waiting for reply 2141 How long to sleep when waiting for reply (default: 100)
2145 sleep_tries 2142 sleep_tries
2146 How many times to try sleeping during a w 2143 How many times to try sleeping during a wait (default: 50)
2147 ospath 2144 ospath
2148 Pathname to processed ICS2115 OS firmware 2145 Pathname to processed ICS2115 OS firmware (default:wavefront.os);
2149 The path name of the ISC2115 OS firmware. 2146 The path name of the ISC2115 OS firmware. In the recent
2150 version, it's handled via firmware loader 2147 version, it's handled via firmware loader framework, so it
2151 must be installed in the proper path, typ 2148 must be installed in the proper path, typically,
2152 /lib/firmware. 2149 /lib/firmware.
2153 reset_time 2150 reset_time
2154 How long to wait for a reset to take effe 2151 How long to wait for a reset to take effect (default:2)
2155 ramcheck_time 2152 ramcheck_time
2156 How many seconds to wait for the RAM test 2153 How many seconds to wait for the RAM test (default:20)
2157 osrun_time 2154 osrun_time
2158 How many seconds to wait for the ICS2115 2155 How many seconds to wait for the ICS2115 OS (default:10)
2159 2156
2160 This module supports multiple cards and ISA P 2157 This module supports multiple cards and ISA PnP.
2161 2158
2162 Note: the firmware file ``wavefront.os`` was 2159 Note: the firmware file ``wavefront.os`` was located in the earlier
2163 version in /etc. Now it's loaded via firmwar 2160 version in /etc. Now it's loaded via firmware loader, and
2164 must be in the proper firmware path, such as 2161 must be in the proper firmware path, such as /lib/firmware.
2165 Copy (or symlink) the file appropriately if y 2162 Copy (or symlink) the file appropriately if you get an error
2166 regarding firmware downloading after upgradin 2163 regarding firmware downloading after upgrading the kernel.
2167 2164
2168 Module snd-sonicvibes 2165 Module snd-sonicvibes
2169 --------------------- 2166 ---------------------
2170 2167
2171 Module for S3 SonicVibes PCI sound cards. 2168 Module for S3 SonicVibes PCI sound cards.
2172 * PINE Schubert 32 PCI 2169 * PINE Schubert 32 PCI
2173 2170
2174 reverb 2171 reverb
2175 Reverb Enable - 1 = enable, 0 = disable ( 2172 Reverb Enable - 1 = enable, 0 = disable (default);
2176 SoundCard must have onboard SRAM for this 2173 SoundCard must have onboard SRAM for this.
2177 mge 2174 mge
2178 Mic Gain Enable - 1 = enable, 0 = disable 2175 Mic Gain Enable - 1 = enable, 0 = disable (default)
2179 2176
2180 This module supports multiple cards and autop 2177 This module supports multiple cards and autoprobe.
2181 2178
2182 Module snd-serial-u16550 2179 Module snd-serial-u16550
2183 ------------------------ 2180 ------------------------
2184 2181
2185 Module for UART16550A serial MIDI ports. 2182 Module for UART16550A serial MIDI ports.
2186 2183
2187 port 2184 port
2188 port # for UART16550A chip 2185 port # for UART16550A chip
2189 irq 2186 irq
2190 IRQ # for UART16550A chip, -1 = poll mode 2187 IRQ # for UART16550A chip, -1 = poll mode
2191 speed 2188 speed
2192 speed in bauds (9600,19200,38400,57600,11 2189 speed in bauds (9600,19200,38400,57600,115200)
2193 38400 = default 2190 38400 = default
2194 base 2191 base
2195 base for divisor in bauds (57600,115200,2 2192 base for divisor in bauds (57600,115200,230400,460800)
2196 115200 = default 2193 115200 = default
2197 outs 2194 outs
2198 number of MIDI ports in a serial port (1- 2195 number of MIDI ports in a serial port (1-4)
2199 1 = default 2196 1 = default
2200 adaptor 2197 adaptor
2201 Type of adaptor. 2198 Type of adaptor.
2202 0 = Soundcanvas, 1 = MS-124T, 2 = MS- 2199 0 = Soundcanvas, 1 = MS-124T, 2 = MS-124W S/A,
2203 3 = MS-124W M/B, 4 = Generic 2200 3 = MS-124W M/B, 4 = Generic
2204 2201
2205 This module supports multiple cards. This mod 2202 This module supports multiple cards. This module does not support autoprobe
2206 thus the main port must be specified!!! Other 2203 thus the main port must be specified!!! Other options are optional.
2207 2204
2208 Module snd-trident 2205 Module snd-trident
2209 ------------------ 2206 ------------------
2210 2207
2211 Module for Trident 4DWave DX/NX sound cards. 2208 Module for Trident 4DWave DX/NX sound cards.
2212 * Best Union Miss Melody 4DWave PCI 2209 * Best Union Miss Melody 4DWave PCI
2213 * HIS 4DWave PCI 2210 * HIS 4DWave PCI
2214 * Warpspeed ONSpeed 4DWave PCI 2211 * Warpspeed ONSpeed 4DWave PCI
2215 * AzTech PCI 64-Q3D 2212 * AzTech PCI 64-Q3D
2216 * Addonics SV 750 2213 * Addonics SV 750
2217 * CHIC True Sound 4Dwave 2214 * CHIC True Sound 4Dwave
2218 * Shark Predator4D-PCI 2215 * Shark Predator4D-PCI
2219 * Jaton SonicWave 4D 2216 * Jaton SonicWave 4D
2220 * SiS SI7018 PCI Audio 2217 * SiS SI7018 PCI Audio
2221 * Hoontech SoundTrack Digital 4DWave NX 2218 * Hoontech SoundTrack Digital 4DWave NX
2222 2219
2223 pcm_channels 2220 pcm_channels
2224 max channels (voices) reserved for PCM 2221 max channels (voices) reserved for PCM
2225 wavetable_size 2222 wavetable_size
2226 max wavetable size in kB (4-?kb) 2223 max wavetable size in kB (4-?kb)
2227 2224
2228 This module supports multiple cards and autop 2225 This module supports multiple cards and autoprobe.
2229 2226
2230 The power-management is supported. 2227 The power-management is supported.
2231 2228
2232 Module snd-ua101 2229 Module snd-ua101
2233 ---------------- 2230 ----------------
2234 2231
2235 Module for the Edirol UA-101/UA-1000 audio/MI 2232 Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
2236 2233
2237 This module supports multiple devices, autopr 2234 This module supports multiple devices, autoprobe and hotplugging.
2238 2235
2239 Module snd-usb-audio 2236 Module snd-usb-audio
2240 -------------------- 2237 --------------------
2241 2238
2242 Module for USB audio and USB MIDI devices. 2239 Module for USB audio and USB MIDI devices.
2243 2240
2244 vid 2241 vid
2245 Vendor ID for the device (optional) 2242 Vendor ID for the device (optional)
2246 pid 2243 pid
2247 Product ID for the device (optional) 2244 Product ID for the device (optional)
2248 nrpacks 2245 nrpacks
2249 Max. number of packets per URB (default: 2246 Max. number of packets per URB (default: 8)
2250 device_setup 2247 device_setup
2251 Device specific magic number (optional); 2248 Device specific magic number (optional);
2252 Influence depends on the device 2249 Influence depends on the device
2253 Default: 0x0000 2250 Default: 0x0000
2254 ignore_ctl_error 2251 ignore_ctl_error
2255 Ignore any USB-controller regarding mixer 2252 Ignore any USB-controller regarding mixer interface (default: no)
2256 autoclock 2253 autoclock
2257 Enable auto-clock selection for UAC2 devi 2254 Enable auto-clock selection for UAC2 devices (default: yes)
2258 quirk_alias 2255 quirk_alias
2259 Quirk alias list, pass strings like ``012 2256 Quirk alias list, pass strings like ``0123abcd:5678beef``, which
2260 applies the existing quirk for the device 2257 applies the existing quirk for the device 5678:beef to a new
2261 device 0123:abcd. 2258 device 0123:abcd.
2262 implicit_fb 2259 implicit_fb
2263 Apply the generic implicit feedback sync 2260 Apply the generic implicit feedback sync mode. When this is set
2264 and the playback stream sync mode is ASYN 2261 and the playback stream sync mode is ASYNC, the driver tries to
2265 tie an adjacent ASYNC capture stream as t 2262 tie an adjacent ASYNC capture stream as the implicit feedback
2266 source. This is equivalent with quirk_fl 2263 source. This is equivalent with quirk_flags bit 17.
2267 use_vmalloc 2264 use_vmalloc
2268 Use vmalloc() for allocations of the PCM 2265 Use vmalloc() for allocations of the PCM buffers (default: yes).
2269 For architectures with non-coherent memor 2266 For architectures with non-coherent memory like ARM or MIPS, the
2270 mmap access may give inconsistent results 2267 mmap access may give inconsistent results with vmalloc'ed
2271 buffers. If mmap is used on such archite 2268 buffers. If mmap is used on such architectures, turn off this
2272 option, so that the DMA-coherent buffers 2269 option, so that the DMA-coherent buffers are allocated and used
2273 instead. 2270 instead.
2274 delayed_register 2271 delayed_register
2275 The option is needed for devices that hav 2272 The option is needed for devices that have multiple streams
2276 defined in multiple USB interfaces. The 2273 defined in multiple USB interfaces. The driver may invoke
2277 registrations multiple times (once per in 2274 registrations multiple times (once per interface) and this may
2278 lead to the insufficient device enumerati 2275 lead to the insufficient device enumeration.
2279 This option receives an array of strings, 2276 This option receives an array of strings, and you can pass
2280 ID:INTERFACE like ``0123abcd:4`` for perf 2277 ID:INTERFACE like ``0123abcd:4`` for performing the delayed
2281 registration to the given device. In thi 2278 registration to the given device. In this example, when a USB
2282 device 0123:abcd is probed, the driver wa 2279 device 0123:abcd is probed, the driver waits the registration
2283 until the USB interface 4 gets probed. 2280 until the USB interface 4 gets probed.
2284 The driver prints a message like "Found p 2281 The driver prints a message like "Found post-registration device
2285 assignment: 1234abcd:04" for such a devic 2282 assignment: 1234abcd:04" for such a device, so that user can
2286 notice the need. 2283 notice the need.
2287 quirk_flags 2284 quirk_flags
2288 Contains the bit flags for various device 2285 Contains the bit flags for various device specific workarounds.
2289 Applied to the corresponding card index. 2286 Applied to the corresponding card index.
2290 2287
2291 * bit 0: Skip reading sample rate for 2288 * bit 0: Skip reading sample rate for devices
2292 * bit 1: Create Media Controller API 2289 * bit 1: Create Media Controller API entries
2293 * bit 2: Allow alignment on audio sub 2290 * bit 2: Allow alignment on audio sub-slot at transfer
2294 * bit 3: Add length specifier to tran 2291 * bit 3: Add length specifier to transfers
2295 * bit 4: Start playback stream at fir 2292 * bit 4: Start playback stream at first in implement feedback mode
2296 * bit 5: Skip clock selector setup 2293 * bit 5: Skip clock selector setup
2297 * bit 6: Ignore errors from clock sou 2294 * bit 6: Ignore errors from clock source search
2298 * bit 7: Indicates ITF-USB DSD based 2295 * bit 7: Indicates ITF-USB DSD based DACs
2299 * bit 8: Add a delay of 20ms at each 2296 * bit 8: Add a delay of 20ms at each control message handling
2300 * bit 9: Add a delay of 1-2ms at each 2297 * bit 9: Add a delay of 1-2ms at each control message handling
2301 * bit 10: Add a delay of 5-6ms at eac 2298 * bit 10: Add a delay of 5-6ms at each control message handling
2302 * bit 11: Add a delay of 50ms at each 2299 * bit 11: Add a delay of 50ms at each interface setup
2303 * bit 12: Perform sample rate validat 2300 * bit 12: Perform sample rate validations at probe
2304 * bit 13: Disable runtime PM autosusp 2301 * bit 13: Disable runtime PM autosuspend
2305 * bit 14: Ignore errors for mixer acc 2302 * bit 14: Ignore errors for mixer access
2306 * bit 15: Support generic DSD raw U32 2303 * bit 15: Support generic DSD raw U32_BE format
2307 * bit 16: Set up the interface at fir 2304 * bit 16: Set up the interface at first like UAC1
2308 * bit 17: Apply the generic implicit 2305 * bit 17: Apply the generic implicit feedback sync mode
2309 * bit 18: Don't apply implicit feedba 2306 * bit 18: Don't apply implicit feedback sync mode
2310 2307
2311 This module supports multiple devices, autopr 2308 This module supports multiple devices, autoprobe and hotplugging.
2312 2309
2313 NB: ``nrpacks`` parameter can be modified dyn 2310 NB: ``nrpacks`` parameter can be modified dynamically via sysfs.
2314 Don't put the value over 20. Changing via sy 2311 Don't put the value over 20. Changing via sysfs has no sanity
2315 check. 2312 check.
2316 2313
2317 NB: ``ignore_ctl_error=1`` may help when you 2314 NB: ``ignore_ctl_error=1`` may help when you get an error at accessing
2318 the mixer element such as URB error -22. Thi 2315 the mixer element such as URB error -22. This happens on some
2319 buggy USB device or the controller. This wor 2316 buggy USB device or the controller. This workaround corresponds to
2320 the ``quirk_flags`` bit 14, too. 2317 the ``quirk_flags`` bit 14, too.
2321 2318
2322 NB: ``quirk_alias`` option is provided only f 2319 NB: ``quirk_alias`` option is provided only for testing / development.
2323 If you want to have a proper support, contact 2320 If you want to have a proper support, contact to upstream for
2324 adding the matching quirk in the driver code 2321 adding the matching quirk in the driver code statically.
2325 Ditto for ``quirk_flags``. If a device is kn 2322 Ditto for ``quirk_flags``. If a device is known to require specific
2326 workarounds, please report to the upstream. 2323 workarounds, please report to the upstream.
2327 2324
2328 Module snd-usb-caiaq 2325 Module snd-usb-caiaq
2329 -------------------- 2326 --------------------
2330 2327
2331 Module for caiaq UB audio interfaces, 2328 Module for caiaq UB audio interfaces,
2332 2329
2333 * Native Instruments RigKontrol2 2330 * Native Instruments RigKontrol2
2334 * Native Instruments Kore Controller 2331 * Native Instruments Kore Controller
2335 * Native Instruments Audio Kontrol 1 2332 * Native Instruments Audio Kontrol 1
2336 * Native Instruments Audio 8 DJ 2333 * Native Instruments Audio 8 DJ
2337 2334
2338 This module supports multiple devices, autopr 2335 This module supports multiple devices, autoprobe and hotplugging.
2339 2336
2340 Module snd-usb-usx2y 2337 Module snd-usb-usx2y
2341 -------------------- 2338 --------------------
2342 2339
2343 Module for Tascam USB US-122, US-224 and US-4 2340 Module for Tascam USB US-122, US-224 and US-428 devices.
2344 2341
2345 This module supports multiple devices, autopr 2342 This module supports multiple devices, autoprobe and hotplugging.
2346 2343
2347 Note: you need to load the firmware via ``usx 2344 Note: you need to load the firmware via ``usx2yloader`` utility included
2348 in alsa-tools and alsa-firmware packages. 2345 in alsa-tools and alsa-firmware packages.
2349 2346
2350 Module snd-via82xx 2347 Module snd-via82xx
2351 ------------------ 2348 ------------------
2352 2349
2353 Module for AC'97 motherboards based on VIA 82 2350 Module for AC'97 motherboards based on VIA 82C686A/686B, 8233, 8233A,
2354 8233C, 8235, 8237 (south) bridge. 2351 8233C, 8235, 8237 (south) bridge.
2355 2352
2356 mpu_port 2353 mpu_port
2357 0x300,0x310,0x320,0x330, otherwise obtain 2354 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
2358 [VIA686A/686B only] 2355 [VIA686A/686B only]
2359 joystick 2356 joystick
2360 Enable joystick (default off) [VIA686A/68 2357 Enable joystick (default off) [VIA686A/686B only]
2361 ac97_clock 2358 ac97_clock
2362 AC'97 codec clock base (default 48000Hz) 2359 AC'97 codec clock base (default 48000Hz)
2363 dxs_support 2360 dxs_support
2364 support DXS channels, 0 = auto (default), 2361 support DXS channels, 0 = auto (default), 1 = enable, 2 = disable,
2365 3 = 48k only, 4 = no VRA, 5 = enable any 2362 3 = 48k only, 4 = no VRA, 5 = enable any sample rate and different
2366 sample rates on different channels [VIA82 2363 sample rates on different channels [VIA8233/C, 8235, 8237 only]
2367 ac97_quirk 2364 ac97_quirk
2368 AC'97 workaround for strange hardware; 2365 AC'97 workaround for strange hardware;
2369 See `AC97 Quirk Option`_ section below. 2366 See `AC97 Quirk Option`_ section below.
2370 2367
2371 This module supports one chip and autoprobe. 2368 This module supports one chip and autoprobe.
2372 2369
2373 Note: on some SMP motherboards like MSI 694D 2370 Note: on some SMP motherboards like MSI 694D the interrupts might
2374 not be generated properly. In such a case, p 2371 not be generated properly. In such a case, please try to
2375 set the SMP (or MPS) version on BIOS to 1.1 i 2372 set the SMP (or MPS) version on BIOS to 1.1 instead of
2376 default value 1.4. Then the interrupt number 2373 default value 1.4. Then the interrupt number will be
2377 assigned under 15. You might also upgrade you 2374 assigned under 15. You might also upgrade your BIOS.
2378 2375
2379 Note: VIA8233/5/7 (not VIA8233A) can support 2376 Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound)
2380 channels as the first PCM. On these channels 2377 channels as the first PCM. On these channels, up to 4
2381 streams can be played at the same time, and t 2378 streams can be played at the same time, and the controller
2382 can perform sample rate conversion with separ 2379 can perform sample rate conversion with separate rates for
2383 each channel. 2380 each channel.
2384 As default (``dxs_support = 0``), 48k fixed r 2381 As default (``dxs_support = 0``), 48k fixed rate is chosen
2385 except for the known devices since the output 2382 except for the known devices since the output is often
2386 noisy except for 48k on some mother boards du 2383 noisy except for 48k on some mother boards due to the
2387 bug of BIOS. 2384 bug of BIOS.
2388 Please try once ``dxs_support=5`` and if it w 2385 Please try once ``dxs_support=5`` and if it works on other
2389 sample rates (e.g. 44.1kHz of mp3 playback), 2386 sample rates (e.g. 44.1kHz of mp3 playback), please let us
2390 know the PCI subsystem vendor/device id's (ou 2387 know the PCI subsystem vendor/device id's (output of
2391 ``lspci -nv``). 2388 ``lspci -nv``).
2392 If ``dxs_support=5`` does not work, try ``dxs 2389 If ``dxs_support=5`` does not work, try ``dxs_support=4``; if it
2393 doesn't work too, try dxs_support=1. (dxs_su 2390 doesn't work too, try dxs_support=1. (dxs_support=1 is
2394 usually for old motherboards. The correct im 2391 usually for old motherboards. The correct implemented
2395 board should work with 4 or 5.) If it still 2392 board should work with 4 or 5.) If it still doesn't
2396 work and the default setting is ok, ``dxs_sup 2393 work and the default setting is ok, ``dxs_support=3`` is the
2397 right choice. If the default setting doesn't 2394 right choice. If the default setting doesn't work at all,
2398 try ``dxs_support=2`` to disable the DXS chan 2395 try ``dxs_support=2`` to disable the DXS channels.
2399 In any cases, please let us know the result a 2396 In any cases, please let us know the result and the
2400 subsystem vendor/device ids. See `Links and 2397 subsystem vendor/device ids. See `Links and Addresses`_
2401 below. 2398 below.
2402 2399
2403 Note: for the MPU401 on VIA823x, use snd-mpu4 2400 Note: for the MPU401 on VIA823x, use snd-mpu401 driver
2404 additionally. The mpu_port option is for VIA 2401 additionally. The mpu_port option is for VIA686 chips only.
2405 2402
2406 The power-management is supported. 2403 The power-management is supported.
2407 2404
2408 Module snd-via82xx-modem 2405 Module snd-via82xx-modem
2409 ------------------------ 2406 ------------------------
2410 2407
2411 Module for VIA82xx AC97 modem 2408 Module for VIA82xx AC97 modem
2412 2409
2413 ac97_clock 2410 ac97_clock
2414 AC'97 codec clock base (default 48000Hz) 2411 AC'97 codec clock base (default 48000Hz)
2415 2412
2416 This module supports one card and autoprobe. 2413 This module supports one card and autoprobe.
2417 2414
2418 Note: The default index value of this module 2415 Note: The default index value of this module is -2, i.e. the first
2419 slot is excluded. 2416 slot is excluded.
2420 2417
2421 The power-management is supported. 2418 The power-management is supported.
2422 2419
2423 Module snd-virmidi 2420 Module snd-virmidi
2424 ------------------ 2421 ------------------
2425 2422
2426 Module for virtual rawmidi devices. 2423 Module for virtual rawmidi devices.
2427 This module creates virtual rawmidi devices w 2424 This module creates virtual rawmidi devices which communicate
2428 to the corresponding ALSA sequencer ports. 2425 to the corresponding ALSA sequencer ports.
2429 2426
2430 midi_devs 2427 midi_devs
2431 MIDI devices # (1-4, default=4) 2428 MIDI devices # (1-4, default=4)
2432 2429
2433 This module supports multiple cards. 2430 This module supports multiple cards.
2434 2431
2435 Module snd-virtuoso 2432 Module snd-virtuoso
2436 ------------------- 2433 -------------------
2437 2434
2438 Module for sound cards based on the Asus AV66 2435 Module for sound cards based on the Asus AV66/AV100/AV200 chips,
2439 i.e., Xonar D1, DX, D2, D2X, DS, DSX, Essence 2436 i.e., Xonar D1, DX, D2, D2X, DS, DSX, Essence ST (Deluxe),
2440 Essence STX (II), HDAV1.3 (Deluxe), and HDAV1 2437 Essence STX (II), HDAV1.3 (Deluxe), and HDAV1.3 Slim.
2441 2438
2442 This module supports autoprobe and multiple c 2439 This module supports autoprobe and multiple cards.
2443 2440
2444 Module snd-vx222 2441 Module snd-vx222
2445 ---------------- 2442 ----------------
2446 2443
2447 Module for Digigram VX-Pocket VX222, V222 v2 2444 Module for Digigram VX-Pocket VX222, V222 v2 and Mic cards.
2448 2445
2449 mic 2446 mic
2450 Enable Microphone on V222 Mic (NYI) 2447 Enable Microphone on V222 Mic (NYI)
2451 ibl 2448 ibl
2452 Capture IBL size. (default = 0, minimum s 2449 Capture IBL size. (default = 0, minimum size)
2453 2450
2454 This module supports multiple cards. 2451 This module supports multiple cards.
2455 2452
2456 When the driver is compiled as a module and t 2453 When the driver is compiled as a module and the hotplug firmware
2457 is supported, the firmware data is loaded via 2454 is supported, the firmware data is loaded via hotplug automatically.
2458 Install the necessary firmware files in alsa- 2455 Install the necessary firmware files in alsa-firmware package.
2459 When no hotplug fw loader is available, you n 2456 When no hotplug fw loader is available, you need to load the
2460 firmware via vxloader utility in alsa-tools p 2457 firmware via vxloader utility in alsa-tools package. To invoke
2461 vxloader automatically, add the following to 2458 vxloader automatically, add the following to /etc/modprobe.d/alsa.conf
2462 2459
2463 :: 2460 ::
2464 2461
2465 install snd-vx222 /sbin/modprobe --first-ti 2462 install snd-vx222 /sbin/modprobe --first-time -i snd-vx222\
2466 && /usr/bin/vxloader 2463 && /usr/bin/vxloader
2467 2464
2468 (for 2.2/2.4 kernels, add ``post-install /usr 2465 (for 2.2/2.4 kernels, add ``post-install /usr/bin/vxloader`` to
2469 /etc/modules.conf, instead.) 2466 /etc/modules.conf, instead.)
2470 IBL size defines the interrupts period for PC 2467 IBL size defines the interrupts period for PCM. The smaller size
2471 gives smaller latency but leads to more CPU c 2468 gives smaller latency but leads to more CPU consumption, too.
2472 The size is usually aligned to 126. As defau 2469 The size is usually aligned to 126. As default (=0), the smallest
2473 size is chosen. The possible IBL values can 2470 size is chosen. The possible IBL values can be found in
2474 /proc/asound/cardX/vx-status proc file. 2471 /proc/asound/cardX/vx-status proc file.
2475 2472
2476 The power-management is supported. 2473 The power-management is supported.
2477 2474
2478 Module snd-vxpocket 2475 Module snd-vxpocket
2479 ------------------- 2476 -------------------
2480 2477
2481 Module for Digigram VX-Pocket VX2 and 440 PCM 2478 Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
2482 2479
2483 ibl 2480 ibl
2484 Capture IBL size. (default = 0, minimum s 2481 Capture IBL size. (default = 0, minimum size)
2485 2482
2486 This module supports multiple cards. The mod 2483 This module supports multiple cards. The module is compiled only when
2487 PCMCIA is supported on kernel. 2484 PCMCIA is supported on kernel.
2488 2485
2489 With the older 2.6.x kernel, to activate the 2486 With the older 2.6.x kernel, to activate the driver via the card
2490 manager, you'll need to set up /etc/pcmcia/vx 2487 manager, you'll need to set up /etc/pcmcia/vxpocket.conf. See the
2491 sound/pcmcia/vx/vxpocket.c. 2.6.13 or later 2488 sound/pcmcia/vx/vxpocket.c. 2.6.13 or later kernel requires no
2492 longer require a config file. 2489 longer require a config file.
2493 2490
2494 When the driver is compiled as a module and t 2491 When the driver is compiled as a module and the hotplug firmware
2495 is supported, the firmware data is loaded via 2492 is supported, the firmware data is loaded via hotplug automatically.
2496 Install the necessary firmware files in alsa- 2493 Install the necessary firmware files in alsa-firmware package.
2497 When no hotplug fw loader is available, you n 2494 When no hotplug fw loader is available, you need to load the
2498 firmware via vxloader utility in alsa-tools p 2495 firmware via vxloader utility in alsa-tools package.
2499 2496
2500 About capture IBL, see the description of snd 2497 About capture IBL, see the description of snd-vx222 module.
2501 2498
2502 Note: snd-vxp440 driver is merged to snd-vxpo 2499 Note: snd-vxp440 driver is merged to snd-vxpocket driver since
2503 ALSA 1.0.10. 2500 ALSA 1.0.10.
2504 2501
2505 The power-management is supported. 2502 The power-management is supported.
2506 2503
2507 Module snd-ymfpci 2504 Module snd-ymfpci
2508 ----------------- 2505 -----------------
2509 2506
2510 Module for Yamaha PCI chips (YMF72x, YMF74x & 2507 Module for Yamaha PCI chips (YMF72x, YMF74x & YMF75x).
2511 2508
2512 mpu_port 2509 mpu_port
2513 0x300,0x330,0x332,0x334, 0 (disable) by d 2510 0x300,0x330,0x332,0x334, 0 (disable) by default,
2514 1 (auto-detect for YMF744/754 only) 2511 1 (auto-detect for YMF744/754 only)
2515 fm_port 2512 fm_port
2516 0x388,0x398,0x3a0,0x3a8, 0 (disable) by d 2513 0x388,0x398,0x3a0,0x3a8, 0 (disable) by default
2517 1 (auto-detect for YMF744/754 only) 2514 1 (auto-detect for YMF744/754 only)
2518 joystick_port 2515 joystick_port
2519 0x201,0x202,0x204,0x205, 0 (disable) by d 2516 0x201,0x202,0x204,0x205, 0 (disable) by default,
2520 1 (auto-detect) 2517 1 (auto-detect)
2521 rear_switch 2518 rear_switch
2522 enable shared rear/line-in switch (bool) 2519 enable shared rear/line-in switch (bool)
2523 2520
2524 This module supports autoprobe and multiple c 2521 This module supports autoprobe and multiple chips.
2525 2522
2526 The power-management is supported. 2523 The power-management is supported.
2527 2524
2528 Module snd-pdaudiocf 2525 Module snd-pdaudiocf
2529 -------------------- 2526 --------------------
2530 2527
2531 Module for Sound Core PDAudioCF sound card. 2528 Module for Sound Core PDAudioCF sound card.
2532 2529
2533 The power-management is supported. 2530 The power-management is supported.
2534 2531
2535 2532
2536 AC97 Quirk Option 2533 AC97 Quirk Option
2537 ================= 2534 =================
2538 2535
2539 The ac97_quirk option is used to enable/overr 2536 The ac97_quirk option is used to enable/override the workaround for
2540 specific devices on drivers for on-board AC'9 2537 specific devices on drivers for on-board AC'97 controllers like
2541 snd-intel8x0. Some hardware have swapped out 2538 snd-intel8x0. Some hardware have swapped output pins between Master
2542 and Headphone, or Surround (thanks to confusi 2539 and Headphone, or Surround (thanks to confusion of AC'97
2543 specifications from version to version :-) 2540 specifications from version to version :-)
2544 2541
2545 The driver provides the auto-detection of kno 2542 The driver provides the auto-detection of known problematic devices,
2546 but some might be unknown or wrongly detected 2543 but some might be unknown or wrongly detected. In such a case, pass
2547 the proper value with this option. 2544 the proper value with this option.
2548 2545
2549 The following strings are accepted: 2546 The following strings are accepted:
2550 2547
2551 default 2548 default
2552 Don't override the default setting 2549 Don't override the default setting
2553 none 2550 none
2554 Disable the quirk 2551 Disable the quirk
2555 hp_only 2552 hp_only
2556 Bind Master and Headphone controls as a s 2553 Bind Master and Headphone controls as a single control
2557 swap_hp 2554 swap_hp
2558 Swap headphone and master controls 2555 Swap headphone and master controls
2559 swap_surround 2556 swap_surround
2560 Swap master and surround controls 2557 Swap master and surround controls
2561 ad_sharing 2558 ad_sharing
2562 For AD1985, turn on OMS bit and use headp 2559 For AD1985, turn on OMS bit and use headphone
2563 alc_jack 2560 alc_jack
2564 For ALC65x, turn on the jack sense mode 2561 For ALC65x, turn on the jack sense mode
2565 inv_eapd 2562 inv_eapd
2566 Inverted EAPD implementation 2563 Inverted EAPD implementation
2567 mute_led 2564 mute_led
2568 Bind EAPD bit for turning on/off mute LED 2565 Bind EAPD bit for turning on/off mute LED
2569 2566
2570 For backward compatibility, the corresponding 2567 For backward compatibility, the corresponding integer value -1, 0, ...
2571 are accepted, too. 2568 are accepted, too.
2572 2569
2573 For example, if ``Master`` volume control has 2570 For example, if ``Master`` volume control has no effect on your device
2574 but only ``Headphone`` does, pass ac97_quirk= 2571 but only ``Headphone`` does, pass ac97_quirk=hp_only module option.
2575 2572
2576 2573
2577 Configuring Non-ISAPNP Cards 2574 Configuring Non-ISAPNP Cards
2578 ============================ 2575 ============================
2579 2576
2580 When the kernel is configured with ISA-PnP su 2577 When the kernel is configured with ISA-PnP support, the modules
2581 supporting the isapnp cards will have module 2578 supporting the isapnp cards will have module options ``isapnp``.
2582 If this option is set, *only* the ISA-PnP dev 2579 If this option is set, *only* the ISA-PnP devices will be probed.
2583 For probing the non ISA-PnP cards, you have t 2580 For probing the non ISA-PnP cards, you have to pass ``isapnp=0`` option
2584 together with the proper i/o and irq configur 2581 together with the proper i/o and irq configuration.
2585 2582
2586 When the kernel is configured without ISA-PnP 2583 When the kernel is configured without ISA-PnP support, isapnp option
2587 will be not built in. 2584 will be not built in.
2588 2585
2589 2586
2590 Module Autoloading Support 2587 Module Autoloading Support
2591 ========================== 2588 ==========================
2592 2589
2593 The ALSA drivers can be loaded automatically 2590 The ALSA drivers can be loaded automatically on demand by defining
2594 module aliases. The string ``snd-card-%1`` i 2591 module aliases. The string ``snd-card-%1`` is requested for ALSA native
2595 devices where ``%i`` is sound card number fro 2592 devices where ``%i`` is sound card number from zero to seven.
2596 2593
2597 To auto-load an ALSA driver for OSS services, 2594 To auto-load an ALSA driver for OSS services, define the string
2598 ``sound-slot-%i`` where ``%i`` means the slot 2595 ``sound-slot-%i`` where ``%i`` means the slot number for OSS, which
2599 corresponds to the card index of ALSA. Usual 2596 corresponds to the card index of ALSA. Usually, define this
2600 as the same card module. 2597 as the same card module.
2601 2598
2602 An example configuration for a single emu10k1 2599 An example configuration for a single emu10k1 card is like below:
2603 :: 2600 ::
2604 2601
2605 ----- /etc/modprobe.d/alsa.conf 2602 ----- /etc/modprobe.d/alsa.conf
2606 alias snd-card-0 snd-emu10k1 2603 alias snd-card-0 snd-emu10k1
2607 alias sound-slot-0 snd-emu10k1 2604 alias sound-slot-0 snd-emu10k1
2608 ----- /etc/modprobe.d/alsa.conf 2605 ----- /etc/modprobe.d/alsa.conf
2609 2606
2610 The available number of auto-loaded sound car 2607 The available number of auto-loaded sound cards depends on the module
2611 option ``cards_limit`` of snd module. As def 2608 option ``cards_limit`` of snd module. As default it's set to 1.
2612 To enable the auto-loading of multiple cards, 2609 To enable the auto-loading of multiple cards, specify the number of
2613 sound cards in that option. 2610 sound cards in that option.
2614 2611
2615 When multiple cards are available, it'd bette 2612 When multiple cards are available, it'd better to specify the index
2616 number for each card via module option, too, 2613 number for each card via module option, too, so that the order of
2617 cards is kept consistent. 2614 cards is kept consistent.
2618 2615
2619 An example configuration for two sound cards 2616 An example configuration for two sound cards is like below:
2620 :: 2617 ::
2621 2618
2622 ----- /etc/modprobe.d/alsa.conf 2619 ----- /etc/modprobe.d/alsa.conf
2623 # ALSA portion 2620 # ALSA portion
2624 options snd cards_limit=2 2621 options snd cards_limit=2
2625 alias snd-card-0 snd-interwave 2622 alias snd-card-0 snd-interwave
2626 alias snd-card-1 snd-ens1371 2623 alias snd-card-1 snd-ens1371
2627 options snd-interwave index=0 2624 options snd-interwave index=0
2628 options snd-ens1371 index=1 2625 options snd-ens1371 index=1
2629 # OSS/Free portion 2626 # OSS/Free portion
2630 alias sound-slot-0 snd-interwave 2627 alias sound-slot-0 snd-interwave
2631 alias sound-slot-1 snd-ens1371 2628 alias sound-slot-1 snd-ens1371
2632 ----- /etc/modprobe.d/alsa.conf 2629 ----- /etc/modprobe.d/alsa.conf
2633 2630
2634 In this example, the interwave card is always 2631 In this example, the interwave card is always loaded as the first card
2635 (index 0) and ens1371 as the second (index 1) 2632 (index 0) and ens1371 as the second (index 1).
2636 2633
2637 Alternative (and new) way to fixate the slot 2634 Alternative (and new) way to fixate the slot assignment is to use
2638 ``slots`` option of snd module. In the case 2635 ``slots`` option of snd module. In the case above, specify like the
2639 following: 2636 following:
2640 :: 2637 ::
2641 2638
2642 options snd slots=snd-interwave,snd-ens13 2639 options snd slots=snd-interwave,snd-ens1371
2643 2640
2644 Then, the first slot (#0) is reserved for snd 2641 Then, the first slot (#0) is reserved for snd-interwave driver, and
2645 the second (#1) for snd-ens1371. You can omi 2642 the second (#1) for snd-ens1371. You can omit index option in each
2646 driver if slots option is used (although you 2643 driver if slots option is used (although you can still have them at
2647 the same time as long as they don't conflict) 2644 the same time as long as they don't conflict).
2648 2645
2649 The slots option is especially useful for avo 2646 The slots option is especially useful for avoiding the possible
2650 hot-plugging and the resultant slot conflict. 2647 hot-plugging and the resultant slot conflict. For example, in the
2651 case above again, the first two slots are alr 2648 case above again, the first two slots are already reserved. If any
2652 other driver (e.g. snd-usb-audio) is loaded b 2649 other driver (e.g. snd-usb-audio) is loaded before snd-interwave or
2653 snd-ens1371, it will be assigned to the third 2650 snd-ens1371, it will be assigned to the third or later slot.
2654 2651
2655 When a module name is given with '!', the slo 2652 When a module name is given with '!', the slot will be given for any
2656 modules but that name. For example, ``slots= 2653 modules but that name. For example, ``slots=!snd-pcsp`` will reserve
2657 the first slot for any modules but snd-pcsp. 2654 the first slot for any modules but snd-pcsp.
2658 2655
2659 2656
2660 ALSA PCM devices to OSS devices mapping 2657 ALSA PCM devices to OSS devices mapping
2661 ======================================= 2658 =======================================
2662 :: 2659 ::
2663 2660
2664 /dev/snd/pcmC0D0[c|p] -> /dev/audio0 (/d 2661 /dev/snd/pcmC0D0[c|p] -> /dev/audio0 (/dev/audio) -> minor 4
2665 /dev/snd/pcmC0D0[c|p] -> /dev/dsp0 (/dev 2662 /dev/snd/pcmC0D0[c|p] -> /dev/dsp0 (/dev/dsp) -> minor 3
2666 /dev/snd/pcmC0D1[c|p] -> /dev/adsp0 (/de 2663 /dev/snd/pcmC0D1[c|p] -> /dev/adsp0 (/dev/adsp) -> minor 12
2667 /dev/snd/pcmC1D0[c|p] -> /dev/audio1 2664 /dev/snd/pcmC1D0[c|p] -> /dev/audio1 -> minor 4+16 = 20
2668 /dev/snd/pcmC1D0[c|p] -> /dev/dsp1 2665 /dev/snd/pcmC1D0[c|p] -> /dev/dsp1 -> minor 3+16 = 19
2669 /dev/snd/pcmC1D1[c|p] -> /dev/adsp1 2666 /dev/snd/pcmC1D1[c|p] -> /dev/adsp1 -> minor 12+16 = 28
2670 /dev/snd/pcmC2D0[c|p] -> /dev/audio2 2667 /dev/snd/pcmC2D0[c|p] -> /dev/audio2 -> minor 4+32 = 36
2671 /dev/snd/pcmC2D0[c|p] -> /dev/dsp2 2668 /dev/snd/pcmC2D0[c|p] -> /dev/dsp2 -> minor 3+32 = 39
2672 /dev/snd/pcmC2D1[c|p] -> /dev/adsp2 2669 /dev/snd/pcmC2D1[c|p] -> /dev/adsp2 -> minor 12+32 = 44
2673 2670
2674 The first number from ``/dev/snd/pcmC{X}D{Y}[ 2671 The first number from ``/dev/snd/pcmC{X}D{Y}[c|p]`` expression means
2675 sound card number and second means device num 2672 sound card number and second means device number. The ALSA devices
2676 have either ``c`` or ``p`` suffix indicating 2673 have either ``c`` or ``p`` suffix indicating the direction, capture and
2677 playback, respectively. 2674 playback, respectively.
2678 2675
2679 Please note that the device mapping above may 2676 Please note that the device mapping above may be varied via the module
2680 options of snd-pcm-oss module. 2677 options of snd-pcm-oss module.
2681 2678
2682 2679
2683 Proc interfaces (/proc/asound) 2680 Proc interfaces (/proc/asound)
2684 ============================== 2681 ==============================
2685 2682
2686 /proc/asound/card#/pcm#[cp]/oss 2683 /proc/asound/card#/pcm#[cp]/oss
2687 ------------------------------- 2684 -------------------------------
2688 erase 2685 erase
2689 erase all additional information about OS 2686 erase all additional information about OSS applications
2690 2687
2691 <app_name> <fragments> <fragment_size> [<opti 2688 <app_name> <fragments> <fragment_size> [<options>]
2692 <app_name> 2689 <app_name>
2693 name of application with (higher prio 2690 name of application with (higher priority) or without path
2694 <fragments> 2691 <fragments>
2695 number of fragments or zero if auto 2692 number of fragments or zero if auto
2696 <fragment_size> 2693 <fragment_size>
2697 size of fragment in bytes or zero if 2694 size of fragment in bytes or zero if auto
2698 <options> 2695 <options>
2699 optional parameters 2696 optional parameters
2700 2697
2701 disable 2698 disable
2702 the application tries to open a p 2699 the application tries to open a pcm device for
2703 this channel but does not want to 2700 this channel but does not want to use it.
2704 (Cause a bug or mmap needs) 2701 (Cause a bug or mmap needs)
2705 It's good for Quake etc... 2702 It's good for Quake etc...
2706 direct 2703 direct
2707 don't use plugins 2704 don't use plugins
2708 block 2705 block
2709 force block mode (rvplayer) 2706 force block mode (rvplayer)
2710 non-block 2707 non-block
2711 force non-block mode 2708 force non-block mode
2712 whole-frag 2709 whole-frag
2713 write only whole fragments (optim 2710 write only whole fragments (optimization affecting
2714 playback only) 2711 playback only)
2715 no-silence 2712 no-silence
2716 do not fill silence ahead to avoi 2713 do not fill silence ahead to avoid clicks
2717 buggy-ptr 2714 buggy-ptr
2718 Returns the whitespace blocks in 2715 Returns the whitespace blocks in GETOPTR ioctl
2719 instead of filled blocks 2716 instead of filled blocks
2720 2717
2721 Example: 2718 Example:
2722 :: 2719 ::
2723 2720
2724 echo "x11amp 128 16384" > /proc/asound/ca 2721 echo "x11amp 128 16384" > /proc/asound/card0/pcm0p/oss
2725 echo "squake 0 0 disable" > /proc/asound/ 2722 echo "squake 0 0 disable" > /proc/asound/card0/pcm0c/oss
2726 echo "rvplayer 0 0 block" > /proc/asound/ 2723 echo "rvplayer 0 0 block" > /proc/asound/card0/pcm0p/oss
2727 2724
2728 2725
2729 Early Buffer Allocation 2726 Early Buffer Allocation
2730 ======================= 2727 =======================
2731 2728
2732 Some drivers (e.g. hdsp) require the large co 2729 Some drivers (e.g. hdsp) require the large contiguous buffers, and
2733 sometimes it's too late to find such spaces w 2730 sometimes it's too late to find such spaces when the driver module is
2734 actually loaded due to memory fragmentation. 2731 actually loaded due to memory fragmentation. You can pre-allocate the
2735 PCM buffers by loading snd-page-alloc module 2732 PCM buffers by loading snd-page-alloc module and write commands to its
2736 proc file in prior, for example, in the early 2733 proc file in prior, for example, in the early boot stage like
2737 ``/etc/init.d/*.local`` scripts. 2734 ``/etc/init.d/*.local`` scripts.
2738 2735
2739 Reading the proc file /proc/drivers/snd-page- 2736 Reading the proc file /proc/drivers/snd-page-alloc shows the current
2740 usage of page allocation. In writing, you ca 2737 usage of page allocation. In writing, you can send the following
2741 commands to the snd-page-alloc driver: 2738 commands to the snd-page-alloc driver:
2742 2739
2743 * add VENDOR DEVICE MASK SIZE BUFFERS 2740 * add VENDOR DEVICE MASK SIZE BUFFERS
2744 2741
2745 VENDOR and DEVICE are PCI vendor and device I 2742 VENDOR and DEVICE are PCI vendor and device IDs. They take
2746 integer numbers (0x prefix is needed for the 2743 integer numbers (0x prefix is needed for the hex).
2747 MASK is the PCI DMA mask. Pass 0 if not rest 2744 MASK is the PCI DMA mask. Pass 0 if not restricted.
2748 SIZE is the size of each buffer to allocate. 2745 SIZE is the size of each buffer to allocate. You can pass
2749 k and m suffix for KB and MB. The max number 2746 k and m suffix for KB and MB. The max number is 16MB.
2750 BUFFERS is the number of buffers to allocate. 2747 BUFFERS is the number of buffers to allocate. It must be greater
2751 than 0. The max number is 4. 2748 than 0. The max number is 4.
2752 2749
2753 * erase 2750 * erase
2754 2751
2755 This will erase the all pre-allocated buffers 2752 This will erase the all pre-allocated buffers which are not in
2756 use. 2753 use.
2757 2754
2758 2755
2759 Links and Addresses 2756 Links and Addresses
2760 =================== 2757 ===================
2761 2758
2762 ALSA project homepage 2759 ALSA project homepage
2763 http://www.alsa-project.org 2760 http://www.alsa-project.org
2764 Kernel Bugzilla 2761 Kernel Bugzilla
2765 http://bugzilla.kernel.org/ 2762 http://bugzilla.kernel.org/
2766 ALSA Developers ML 2763 ALSA Developers ML
2767 mailto:alsa-devel@alsa-project.org 2764 mailto:alsa-devel@alsa-project.org
2768 alsa-info.sh script 2765 alsa-info.sh script
2769 https://www.alsa-project.org/alsa-info.sh 2766 https://www.alsa-project.org/alsa-info.sh
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.