1 #! /bin/sh 1 #! /bin/sh
2 # 2 #
3 # Turtle Beach MultiSound Driver Notes 3 # Turtle Beach MultiSound Driver Notes
4 # -- Andrew Veliath <andrewtv@usa.net> 4 # -- Andrew Veliath <andrewtv@usa.net>
5 # 5 #
6 # Last update: September 6 # Last update: September 10, 1998
7 # Corresponding msnd driver: 0.8.3 7 # Corresponding msnd driver: 0.8.3
8 # 8 #
9 # ** This file is a README (top part) and shel 9 # ** This file is a README (top part) and shell archive (bottom part).
10 # The corresponding archived utility source 10 # The corresponding archived utility sources can be unpacked by
11 # running `sh MultiSound' (the utilities ar 11 # running `sh MultiSound' (the utilities are only needed for the
12 # Pinnacle and Fiji cards). ** 12 # Pinnacle and Fiji cards). **
13 # 13 #
14 # 14 #
15 # -=-=- Getting Firmware -=-=- 15 # -=-=- Getting Firmware -=-=-
16 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 16 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17 # 17 #
18 # See the section `Obtaining and Creating Fir 18 # See the section `Obtaining and Creating Firmware Files' in this
19 # document for instructions on obtaining the 19 # document for instructions on obtaining the necessary firmware
20 # files. 20 # files.
21 # 21 #
22 # 22 #
23 # Supported Features 23 # Supported Features
24 # ~~~~~~~~~~~~~~~~~~ 24 # ~~~~~~~~~~~~~~~~~~
25 # 25 #
26 # Currently, full-duplex digital audio (/dev/ 26 # Currently, full-duplex digital audio (/dev/dsp only, /dev/audio is
27 # not currently available) and mixer function 27 # not currently available) and mixer functionality (/dev/mixer) are
28 # supported (memory mapped digital audio is n 28 # supported (memory mapped digital audio is not yet supported).
29 # Digital transfers and monitoring can be don 29 # Digital transfers and monitoring can be done as well if you have
30 # the digital daughterboard (see the section 30 # the digital daughterboard (see the section on using the S/PDIF port
31 # for more information). 31 # for more information).
32 # 32 #
33 # Support for the Turtle Beach MultiSound Hur 33 # Support for the Turtle Beach MultiSound Hurricane architecture is
34 # composed of the following modules (these ca 34 # composed of the following modules (these can also operate compiled
35 # into the kernel): 35 # into the kernel):
36 # 36 #
37 # snd-msnd-lib - MultiSound base (r 37 # snd-msnd-lib - MultiSound base (requires snd)
38 # 38 #
39 # snd-msnd-classic - Base audio/mixer s 39 # snd-msnd-classic - Base audio/mixer support for Classic, Monetery and
40 # Tahiti cards 40 # Tahiti cards
41 # 41 #
42 # snd-msnd-pinnacle - Base audio/mixer s 42 # snd-msnd-pinnacle - Base audio/mixer support for Pinnacle and Fiji cards
43 # 43 #
44 # 44 #
45 # Important Notes - Read Before Using 45 # Important Notes - Read Before Using
46 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 46 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
47 # 47 #
48 # The firmware files are not included (may ch 48 # The firmware files are not included (may change in future). You
49 # must obtain these images from Turtle Beach 49 # must obtain these images from Turtle Beach (they are included in
50 # the MultiSound Development Kits), and place 50 # the MultiSound Development Kits), and place them in /etc/sound for
51 # example, and give the full paths in the Lin 51 # example, and give the full paths in the Linux configuration. If
52 # you are compiling in support for the MultiS 52 # you are compiling in support for the MultiSound driver rather than
53 # using it as a module, these firmware files 53 # using it as a module, these firmware files must be accessible
54 # during kernel compilation. 54 # during kernel compilation.
55 # 55 #
56 # Please note these files must be binary file 56 # Please note these files must be binary files, not assembler. See
57 # the section later in this document for inst 57 # the section later in this document for instructions to obtain these
58 # files. 58 # files.
59 # 59 #
60 # 60 #
61 # Configuring Card Resources 61 # Configuring Card Resources
62 # ~~~~~~~~~~~~~~~~~~~~~~~~~~ 62 # ~~~~~~~~~~~~~~~~~~~~~~~~~~
63 # 63 #
64 # ** This section is very important, as your 64 # ** This section is very important, as your card may not work at all
65 # or your machine may crash if you do not 65 # or your machine may crash if you do not do this correctly. **
66 # 66 #
67 # * Classic/Monterey/Tahiti 67 # * Classic/Monterey/Tahiti
68 # 68 #
69 # These cards are configured through the driv 69 # These cards are configured through the driver snd-msnd-classic. You must
70 # know the io port, then the driver will sele 70 # know the io port, then the driver will select the irq and memory resources
71 # on the card. It is up to you to know if th 71 # on the card. It is up to you to know if these are free locations or now,
72 # a conflict can lock the machine up. 72 # a conflict can lock the machine up.
73 # 73 #
74 # * Pinnacle/Fiji 74 # * Pinnacle/Fiji
75 # 75 #
76 # The Pinnacle and Fiji cards have an extra c 76 # The Pinnacle and Fiji cards have an extra config port, either
77 # 0x250, 0x260 or 0x270. This port can be di 77 # 0x250, 0x260 or 0x270. This port can be disabled to have the card
78 # configured strictly through PnP, however yo 78 # configured strictly through PnP, however you lose the ability to
79 # access the IDE controller and joystick devi 79 # access the IDE controller and joystick devices on this card when
80 # using PnP. The included pinnaclecfg progra 80 # using PnP. The included pinnaclecfg program in this shell archive
81 # can be used to configure the card in non-Pn 81 # can be used to configure the card in non-PnP mode, and in PnP mode
82 # you can use isapnptools. These are describ 82 # you can use isapnptools. These are described briefly here.
83 # 83 #
84 # pinnaclecfg is not required; you can use th 84 # pinnaclecfg is not required; you can use the snd-msnd-pinnacle module
85 # to fully configure the card as well. Howev 85 # to fully configure the card as well. However, pinnaclecfg can be
86 # used to change the resource values of a par 86 # used to change the resource values of a particular device after the
87 # snd-msnd-pinnacle module has been loaded. 87 # snd-msnd-pinnacle module has been loaded. If you are compiling the
88 # driver into the kernel, you must set these 88 # driver into the kernel, you must set these values during compile
89 # time, however other peripheral resource val 89 # time, however other peripheral resource values can be changed with
90 # the pinnaclecfg program after the kernel is 90 # the pinnaclecfg program after the kernel is loaded.
91 # 91 #
92 # 92 #
93 # *** PnP mode 93 # *** PnP mode
94 # 94 #
95 # Use pnpdump to obtain a sample configuratio 95 # Use pnpdump to obtain a sample configuration if you can; I was able
96 # to obtain one with the command `pnpdump 1 0 96 # to obtain one with the command `pnpdump 1 0x203' -- this may vary
97 # for you (running pnpdump by itself did not 97 # for you (running pnpdump by itself did not work for me). Then,
98 # edit this file and use isapnp to uncomment 98 # edit this file and use isapnp to uncomment and set the card values.
99 # Use these values when inserting the snd-msn 99 # Use these values when inserting the snd-msnd-pinnacle module. Using
100 # this method, you can set the resources for 100 # this method, you can set the resources for the DSP and the Kurzweil
101 # synth (Pinnacle). Since Linux does not dir 101 # synth (Pinnacle). Since Linux does not directly support PnP
102 # devices, you may have difficulty when using 102 # devices, you may have difficulty when using the card in PnP mode
103 # when it the driver is compiled into the ker 103 # when it the driver is compiled into the kernel. Using non-PnP mode
104 # is preferable in this case. 104 # is preferable in this case.
105 # 105 #
106 # Here is an example mypinnacle.conf for isap 106 # Here is an example mypinnacle.conf for isapnp that sets the card to
107 # io base 0x210, irq 5 and mem 0xd8000, and a 107 # io base 0x210, irq 5 and mem 0xd8000, and also sets the Kurzweil
108 # synth to 0x330 and irq 9 (may need editing 108 # synth to 0x330 and irq 9 (may need editing for your system):
109 # 109 #
110 # (READPORT 0x0203) 110 # (READPORT 0x0203)
111 # (CSN 2) 111 # (CSN 2)
112 # (IDENTIFY *) 112 # (IDENTIFY *)
113 # 113 #
114 # # DSP 114 # # DSP
115 # (CONFIGURE BVJ0440/-1 (LD 0 115 # (CONFIGURE BVJ0440/-1 (LD 0
116 # (INT 0 (IRQ 5 (MODE +E))) (IO 0 (BA 116 # (INT 0 (IRQ 5 (MODE +E))) (IO 0 (BASE 0x0210)) (MEM 0 (BASE 0x0d8000))
117 # (ACT Y))) 117 # (ACT Y)))
118 # 118 #
119 # # Kurzweil Synth (Pinnacle Only) 119 # # Kurzweil Synth (Pinnacle Only)
120 # (CONFIGURE BVJ0440/-1 (LD 1 120 # (CONFIGURE BVJ0440/-1 (LD 1
121 # (IO 0 (BASE 0x0330)) (INT 0 (IRQ 9 121 # (IO 0 (BASE 0x0330)) (INT 0 (IRQ 9 (MODE +E)))
122 # (ACT Y))) 122 # (ACT Y)))
123 # 123 #
124 # (WAITFORKEY) 124 # (WAITFORKEY)
125 # 125 #
126 # 126 #
127 # *** Non-PnP mode 127 # *** Non-PnP mode
128 # 128 #
129 # The second way is by running the card in no 129 # The second way is by running the card in non-PnP mode. This
130 # actually has some advantages in that you ca 130 # actually has some advantages in that you can access some other
131 # devices on the card, such as the joystick a 131 # devices on the card, such as the joystick and IDE controller. To
132 # configure the card, unpack this shell archi 132 # configure the card, unpack this shell archive and build the
133 # pinnaclecfg program. Using this program, y 133 # pinnaclecfg program. Using this program, you can assign the
134 # resource values to the card's devices, or d 134 # resource values to the card's devices, or disable the devices. As
135 # an alternative to using pinnaclecfg, you ca 135 # an alternative to using pinnaclecfg, you can specify many of the
136 # configuration values when loading the snd-m 136 # configuration values when loading the snd-msnd-pinnacle module (or
137 # during kernel configuration when compiling 137 # during kernel configuration when compiling the driver into the
138 # kernel). 138 # kernel).
139 # 139 #
140 # If you specify cfg=0x250 for the snd-msnd-p 140 # If you specify cfg=0x250 for the snd-msnd-pinnacle module, it
141 # automatically configure the card to the giv 141 # automatically configure the card to the given io, irq and memory
142 # values using that config port (the config p 142 # values using that config port (the config port is jumper selectable
143 # on the card to 0x250, 0x260 or 0x270). 143 # on the card to 0x250, 0x260 or 0x270).
144 # 144 #
145 # See the `snd-msnd-pinnacle Additional Optio 145 # See the `snd-msnd-pinnacle Additional Options' section below for more
146 # information on these parameters (also, if y 146 # information on these parameters (also, if you compile the driver
147 # directly into the kernel, these extra param 147 # directly into the kernel, these extra parameters can be useful
148 # here). 148 # here).
149 # 149 #
150 # 150 #
151 # ** It is very easy to cause problems in your 151 # ** It is very easy to cause problems in your machine if you choose a
152 # resource value which is incorrect. ** 152 # resource value which is incorrect. **
153 # 153 #
154 # 154 #
155 # Examples 155 # Examples
156 # ~~~~~~~~ 156 # ~~~~~~~~
157 # 157 #
158 # * MultiSound Classic/Monterey/Tahiti: 158 # * MultiSound Classic/Monterey/Tahiti:
159 # 159 #
160 # modprobe snd 160 # modprobe snd
161 # insmod snd-msnd-lib 161 # insmod snd-msnd-lib
162 # insmod snd-msnd-classic io=0x290 irq=7 mem= 162 # insmod snd-msnd-classic io=0x290 irq=7 mem=0xd0000
163 # 163 #
164 # * MultiSound Pinnacle in PnP mode: 164 # * MultiSound Pinnacle in PnP mode:
165 # 165 #
166 # modprobe snd 166 # modprobe snd
167 # insmod snd-msnd-lib 167 # insmod snd-msnd-lib
168 # isapnp mypinnacle.conf 168 # isapnp mypinnacle.conf
169 # insmod snd-msnd-pinnacle io=0x210 irq=5 mem 169 # insmod snd-msnd-pinnacle io=0x210 irq=5 mem=0xd8000 <-- match mypinnacle.conf values
170 # 170 #
171 # * MultiSound Pinnacle in non-PnP mode (repl 171 # * MultiSound Pinnacle in non-PnP mode (replace 0x250 with your configuration port,
172 # one of 0x250, 0x260 or 0x270): 172 # one of 0x250, 0x260 or 0x270):
173 # 173 #
174 # modprobe snd 174 # modprobe snd
175 # insmod snd-msnd-lib 175 # insmod snd-msnd-lib
176 # insmod snd-msnd-pinnacle cfg=0x250 io=0x290 176 # insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000
177 # 177 #
178 # * To use the MPU-compatible Kurzweil synth o 178 # * To use the MPU-compatible Kurzweil synth on the Pinnacle in PnP
179 # mode, add the following (assumes you did ` 179 # mode, add the following (assumes you did `isapnp mypinnacle.conf'):
180 # 180 #
181 # insmod snd 181 # insmod snd
182 # insmod mpu401 io=0x330 irq=9 182 # insmod mpu401 io=0x330 irq=9 <-- match mypinnacle.conf values
183 # 183 #
184 # * To use the MPU-compatible Kurzweil synth o 184 # * To use the MPU-compatible Kurzweil synth on the Pinnacle in non-PnP
185 # mode, add the following. Note how we firs 185 # mode, add the following. Note how we first configure the peripheral's
186 # resources, _then_ install a Linux driver f 186 # resources, _then_ install a Linux driver for it:
187 # 187 #
188 # insmod snd 188 # insmod snd
189 # pinnaclecfg 0x250 mpu 0x330 9 189 # pinnaclecfg 0x250 mpu 0x330 9
190 # insmod mpu401 io=0x330 irq=9 190 # insmod mpu401 io=0x330 irq=9
191 # 191 #
192 # -- OR you can use the following sequence wi 192 # -- OR you can use the following sequence without pinnaclecfg in non-PnP mode:
193 # 193 #
194 # modprobe snd 194 # modprobe snd
195 # insmod snd-msnd-lib 195 # insmod snd-msnd-lib
196 # insmod snd-msnd-pinnacle cfg=0x250 io=0x290 196 # insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 mpu_io=0x330 mpu_irq=9
197 # insmod snd 197 # insmod snd
198 # insmod mpu401 io=0x330 irq=9 198 # insmod mpu401 io=0x330 irq=9
199 # 199 #
200 # * To setup the joystick port on the Pinnacle 200 # * To setup the joystick port on the Pinnacle in non-PnP mode (though
201 # you have to find the actual Linux joystick 201 # you have to find the actual Linux joystick driver elsewhere), you
202 # can use pinnaclecfg: 202 # can use pinnaclecfg:
203 # 203 #
204 # pinnaclecfg 0x250 joystick 0x200 204 # pinnaclecfg 0x250 joystick 0x200
205 # 205 #
206 # -- OR you can configure this using snd-msnd 206 # -- OR you can configure this using snd-msnd-pinnacle with the following:
207 # 207 #
208 # modprobe snd 208 # modprobe snd
209 # insmod snd-msnd-lib 209 # insmod snd-msnd-lib
210 # insmod snd-msnd-pinnacle cfg=0x250 io=0x290 210 # insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 joystick_io=0x200
211 # 211 #
212 # 212 #
213 # snd-msnd-classic, snd-msnd-pinnacle Require 213 # snd-msnd-classic, snd-msnd-pinnacle Required Options
214 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 214 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
215 # 215 #
216 # If the following options are not given, the 216 # If the following options are not given, the module will not load.
217 # Examine the kernel message log for informat 217 # Examine the kernel message log for informative error messages.
218 # WARNING--probing isn't supported so try to 218 # WARNING--probing isn't supported so try to make sure you have the
219 # correct shared memory area, otherwise you m 219 # correct shared memory area, otherwise you may experience problems.
220 # 220 #
221 # io I/O base of DSP, e.g. 221 # io I/O base of DSP, e.g. io=0x210
222 # irq IRQ number, e.g. irq=5 222 # irq IRQ number, e.g. irq=5
223 # mem Shared memory area, e. 223 # mem Shared memory area, e.g. mem=0xd8000
224 # 224 #
225 # 225 #
226 # snd-msnd-classic, snd-msnd-pinnacle Additio 226 # snd-msnd-classic, snd-msnd-pinnacle Additional Options
227 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 227 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
228 # 228 #
229 # fifosize The digital audio FIFO 229 # fifosize The digital audio FIFOs, in kilobytes. If not
230 # specified, the default 230 # specified, the default will be used. Increasing
231 # this value will reduce 231 # this value will reduce the chance of a FIFO
232 # underflow at the expen 232 # underflow at the expense of increasing overall
233 # latency. For example, 233 # latency. For example, fifosize=512 will
234 # allocate 512kB read an 234 # allocate 512kB read and write FIFOs (1MB total).
235 # While this may reduce 235 # While this may reduce dropouts, a heavy machine
236 # load will undoubtedly 236 # load will undoubtedly starve the FIFO of data
237 # and you will eventuall 237 # and you will eventually get dropouts. One
238 # option is to alter the 238 # option is to alter the scheduling priority of
239 # the playback process, 239 # the playback process, using `nice' or some form
240 # of POSIX soft real-tim 240 # of POSIX soft real-time scheduling.
241 # 241 #
242 # calibrate_signal Setting this to one ca 242 # calibrate_signal Setting this to one calibrates the ADCs to the
243 # signal, zero calibrate 243 # signal, zero calibrates to the card (defaults
244 # to zero). 244 # to zero).
245 # 245 #
246 # 246 #
247 # snd-msnd-pinnacle Additional Options 247 # snd-msnd-pinnacle Additional Options
248 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 248 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
249 # 249 #
250 # digital Specify digital=1 to e 250 # digital Specify digital=1 to enable the S/PDIF input
251 # if you have the digita 251 # if you have the digital daughterboard
252 # adapter. This will ena 252 # adapter. This will enable access to the
253 # DIGITAL1 input for the 253 # DIGITAL1 input for the soundcard in the mixer.
254 # Some mixer programs mi 254 # Some mixer programs might have trouble setting
255 # the DIGITAL1 source as 255 # the DIGITAL1 source as an input. If you have
256 # trouble, you can try t 256 # trouble, you can try the setdigital.c program
257 # at the bottom of this 257 # at the bottom of this document.
258 # 258 #
259 # cfg Non-PnP configuration 259 # cfg Non-PnP configuration port for the Pinnacle
260 # and Fiji (typically 0x 260 # and Fiji (typically 0x250, 0x260 or 0x270,
261 # depending on the jumpe 261 # depending on the jumper configuration). If
262 # this option is omitted 262 # this option is omitted, then it is assumed
263 # that the card is in Pn 263 # that the card is in PnP mode, and that the
264 # specified DSP resource 264 # specified DSP resource values are already
265 # configured with PnP (i 265 # configured with PnP (i.e. it won't attempt to
266 # do any sort of configu 266 # do any sort of configuration).
267 # 267 #
268 # When the Pinnacle is in non-PnP mode, you c 268 # When the Pinnacle is in non-PnP mode, you can use the following
269 # options to configure particular devices. I 269 # options to configure particular devices. If a full specification
270 # for a device is not given, then the device 270 # for a device is not given, then the device is not configured. Note
271 # that you still must use a Linux driver for 271 # that you still must use a Linux driver for any of these devices
272 # once their resources are setup (such as the 272 # once their resources are setup (such as the Linux joystick driver,
273 # or the MPU401 driver from OSS for the Kurzw 273 # or the MPU401 driver from OSS for the Kurzweil synth).
274 # 274 #
275 # mpu_io I/O port of MPU (on-bo 275 # mpu_io I/O port of MPU (on-board Kurzweil synth)
276 # mpu_irq IRQ of MPU (on-board K 276 # mpu_irq IRQ of MPU (on-board Kurzweil synth)
277 # ide_io0 First I/O port of IDE 277 # ide_io0 First I/O port of IDE controller
278 # ide_io1 Second I/O port of IDE 278 # ide_io1 Second I/O port of IDE controller
279 # ide_irq IRQ IDE controller 279 # ide_irq IRQ IDE controller
280 # joystick_io I/O port of joystick 280 # joystick_io I/O port of joystick
281 # 281 #
282 # 282 #
283 # Obtaining and Creating Firmware Files 283 # Obtaining and Creating Firmware Files
284 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 284 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
285 # 285 #
286 # For the Classic/Tahiti/Monterey 286 # For the Classic/Tahiti/Monterey
287 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 287 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
288 # 288 #
289 # Download to /tmp and unzip the following fi 289 # Download to /tmp and unzip the following file from Turtle Beach:
290 # 290 #
291 # ftp://ftp.voyetra.com/pub/tbs/msndcl/m 291 # ftp://ftp.voyetra.com/pub/tbs/msndcl/msndvkit.zip
292 # 292 #
293 # When unzipped, unzip the file named MsndFil 293 # When unzipped, unzip the file named MsndFiles.zip. Then copy the
294 # following firmware files to /etc/sound (not 294 # following firmware files to /etc/sound (note the file renaming):
295 # 295 #
296 # cp DSPCODE/MSNDINIT.BIN /etc/sound/msndin 296 # cp DSPCODE/MSNDINIT.BIN /etc/sound/msndinit.bin
297 # cp DSPCODE/MSNDPERM.REB /etc/sound/msndpe 297 # cp DSPCODE/MSNDPERM.REB /etc/sound/msndperm.bin
298 # 298 #
299 # When configuring the Linux kernel, specify 299 # When configuring the Linux kernel, specify /etc/sound/msndinit.bin and
300 # /etc/sound/msndperm.bin for the two firmwar 300 # /etc/sound/msndperm.bin for the two firmware files (Linux kernel
301 # versions older than 2.2 do not ask for firm 301 # versions older than 2.2 do not ask for firmware paths, and are
302 # hardcoded to /etc/sound). 302 # hardcoded to /etc/sound).
303 # 303 #
304 # If you are compiling the driver into the ke 304 # If you are compiling the driver into the kernel, these files must
305 # be accessible during compilation, but will 305 # be accessible during compilation, but will not be needed later.
306 # The files must remain, however, if the driv 306 # The files must remain, however, if the driver is used as a module.
307 # 307 #
308 # 308 #
309 # For the Pinnacle/Fiji 309 # For the Pinnacle/Fiji
310 # ~~~~~~~~~~~~~~~~~~~~~ 310 # ~~~~~~~~~~~~~~~~~~~~~
311 # 311 #
312 # Download to /tmp and unzip the following fi 312 # Download to /tmp and unzip the following file from Turtle Beach (be
313 # sure to use the entire URL; some have had t 313 # sure to use the entire URL; some have had trouble navigating to the
314 # URL): 314 # URL):
315 # 315 #
316 # ftp://ftp.voyetra.com/pub/tbs/pinn/pnd 316 # ftp://ftp.voyetra.com/pub/tbs/pinn/pnddk100.zip
317 # 317 #
318 # Unpack this shell archive, and run make in 318 # Unpack this shell archive, and run make in the created directory
319 # (you need a C compiler and flex to build th 319 # (you need a C compiler and flex to build the utilities). This
320 # should give you the executables conv, pinna 320 # should give you the executables conv, pinnaclecfg and setdigital.
321 # conv is only used temporarily here to creat 321 # conv is only used temporarily here to create the firmware files,
322 # while pinnaclecfg is used to configure the 322 # while pinnaclecfg is used to configure the Pinnacle or Fiji card in
323 # non-PnP mode, and setdigital can be used to 323 # non-PnP mode, and setdigital can be used to set the S/PDIF input on
324 # the mixer (pinnaclecfg and setdigital shoul 324 # the mixer (pinnaclecfg and setdigital should be copied to a
325 # convenient place, possibly run during syste 325 # convenient place, possibly run during system initialization).
326 # 326 #
327 # To generating the firmware files with the ` 327 # To generating the firmware files with the `conv' program, we create
328 # the binary firmware files by doing the foll 328 # the binary firmware files by doing the following conversion
329 # (assuming the archive unpacked into a direc 329 # (assuming the archive unpacked into a directory named PINNDDK):
330 # 330 #
331 # ./conv < PINNDDK/dspcode/pndspini.asm > / 331 # ./conv < PINNDDK/dspcode/pndspini.asm > /etc/sound/pndspini.bin
332 # ./conv < PINNDDK/dspcode/pndsperm.asm > / 332 # ./conv < PINNDDK/dspcode/pndsperm.asm > /etc/sound/pndsperm.bin
333 # 333 #
334 # The conv (and conv.l) program is not needed 334 # The conv (and conv.l) program is not needed after conversion and can
335 # be safely deleted. Then, when configuring 335 # be safely deleted. Then, when configuring the Linux kernel, specify
336 # /etc/sound/pndspini.bin and /etc/sound/pnds 336 # /etc/sound/pndspini.bin and /etc/sound/pndsperm.bin for the two
337 # firmware files (Linux kernel versions older 337 # firmware files (Linux kernel versions older than 2.2 do not ask for
338 # firmware paths, and are hardcoded to /etc/s 338 # firmware paths, and are hardcoded to /etc/sound).
339 # 339 #
340 # If you are compiling the driver into the ke 340 # If you are compiling the driver into the kernel, these files must
341 # be accessible during compilation, but will 341 # be accessible during compilation, but will not be needed later.
342 # The files must remain, however, if the driv 342 # The files must remain, however, if the driver is used as a module.
343 # 343 #
344 # 344 #
345 # Using Digital I/O with the S/PDIF Port 345 # Using Digital I/O with the S/PDIF Port
346 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 346 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
347 # 347 #
348 # If you have a Pinnacle or Fiji with the dig 348 # If you have a Pinnacle or Fiji with the digital daughterboard and
349 # want to set it as the input source, you can 349 # want to set it as the input source, you can use this program if you
350 # have trouble trying to do it with a mixer p 350 # have trouble trying to do it with a mixer program (be sure to
351 # insert the module with the digital=1 option 351 # insert the module with the digital=1 option, or say Y to the option
352 # during compiled-in kernel operation). Upon 352 # during compiled-in kernel operation). Upon selection of the S/PDIF
353 # port, you should be able monitor and record 353 # port, you should be able monitor and record from it.
354 # 354 #
355 # There is something to note about using the 355 # There is something to note about using the S/PDIF port. Digital
356 # timing is taken from the digital signal, so 356 # timing is taken from the digital signal, so if a signal is not
357 # connected to the port and it is selected as 357 # connected to the port and it is selected as recording input, you
358 # will find PCM playback to be distorted in p 358 # will find PCM playback to be distorted in playback rate. Also,
359 # attempting to record at a sampling rate oth 359 # attempting to record at a sampling rate other than the DAT rate may
360 # be problematic (i.e. trying to record at 80 360 # be problematic (i.e. trying to record at 8000Hz when the DAT signal
361 # is 44100Hz). If you have a problem with th 361 # is 44100Hz). If you have a problem with this, set the recording
362 # input to analog if you need to record at a 362 # input to analog if you need to record at a rate other than that of
363 # the DAT rate. 363 # the DAT rate.
364 # 364 #
365 # 365 #
366 # -- Shell archive attached below, just run ` 366 # -- Shell archive attached below, just run `sh MultiSound' to extract.
367 # Contains Pinnacle/Fiji utilities to conv 367 # Contains Pinnacle/Fiji utilities to convert firmware, configure
368 # in non-PnP mode, and select the DIGITAL1 368 # in non-PnP mode, and select the DIGITAL1 input for the mixer.
369 # 369 #
370 # 370 #
371 #!/bin/sh 371 #!/bin/sh
372 # This is a shell archive (produced by GNU sha 372 # This is a shell archive (produced by GNU sharutils 4.2).
373 # To extract the files from this archive, save 373 # To extract the files from this archive, save it to some FILE, remove
374 # everything before the `!/bin/sh' line above, 374 # everything before the `!/bin/sh' line above, then type `sh FILE'.
375 # 375 #
376 # Made on 1998-12-04 10:07 EST by <andrewtv@ztr 376 # Made on 1998-12-04 10:07 EST by <andrewtv@ztransform.velsoft.com>.
377 # Source directory was `/home/andrewtv/program 377 # Source directory was `/home/andrewtv/programming/pinnacle/pinnacle'.
378 # 378 #
379 # Existing files will *not* be overwritten unl 379 # Existing files will *not* be overwritten unless `-c' is specified.
380 # 380 #
381 # This shar contains: 381 # This shar contains:
382 # length mode name 382 # length mode name
383 # ------ ---------- -------------------------- 383 # ------ ---------- ------------------------------------------
384 # 2064 -rw-rw-r-- MultiSound.d/setdigital.c 384 # 2064 -rw-rw-r-- MultiSound.d/setdigital.c
385 # 10224 -rw-rw-r-- MultiSound.d/pinnaclecfg.c 385 # 10224 -rw-rw-r-- MultiSound.d/pinnaclecfg.c
386 # 106 -rw-rw-r-- MultiSound.d/Makefile 386 # 106 -rw-rw-r-- MultiSound.d/Makefile
387 # 146 -rw-rw-r-- MultiSound.d/conv.l 387 # 146 -rw-rw-r-- MultiSound.d/conv.l
388 # 1491 -rw-rw-r-- MultiSound.d/msndreset.c 388 # 1491 -rw-rw-r-- MultiSound.d/msndreset.c
389 # 389 #
390 save_IFS="${IFS}" 390 save_IFS="${IFS}"
391 IFS="${IFS}:" 391 IFS="${IFS}:"
392 gettext_dir=FAILED 392 gettext_dir=FAILED
393 locale_dir=FAILED 393 locale_dir=FAILED
394 first_param="$1" 394 first_param="$1"
395 for dir in $PATH 395 for dir in $PATH
396 do 396 do
397 if test "$gettext_dir" = FAILED && test -f $ 397 if test "$gettext_dir" = FAILED && test -f $dir/gettext \
398 && ($dir/gettext --version >/dev/null 2>& 398 && ($dir/gettext --version >/dev/null 2>&1)
399 then 399 then
400 set `$dir/gettext --version 2>&1` 400 set `$dir/gettext --version 2>&1`
401 if test "$3" = GNU 401 if test "$3" = GNU
402 then 402 then
403 gettext_dir=$dir 403 gettext_dir=$dir
404 fi 404 fi
405 fi 405 fi
406 if test "$locale_dir" = FAILED && test -f $d 406 if test "$locale_dir" = FAILED && test -f $dir/shar \
407 && ($dir/shar --print-text-domain-dir >/d 407 && ($dir/shar --print-text-domain-dir >/dev/null 2>&1)
408 then 408 then
409 locale_dir=`$dir/shar --print-text-domain- 409 locale_dir=`$dir/shar --print-text-domain-dir`
410 fi 410 fi
411 done 411 done
412 IFS="$save_IFS" 412 IFS="$save_IFS"
413 if test "$locale_dir" = FAILED || test "$gette 413 if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED
414 then 414 then
415 echo=echo 415 echo=echo
416 else 416 else
417 TEXTDOMAINDIR=$locale_dir 417 TEXTDOMAINDIR=$locale_dir
418 export TEXTDOMAINDIR 418 export TEXTDOMAINDIR
419 TEXTDOMAIN=sharutils 419 TEXTDOMAIN=sharutils
420 export TEXTDOMAIN 420 export TEXTDOMAIN
421 echo="$gettext_dir/gettext -s" 421 echo="$gettext_dir/gettext -s"
422 fi 422 fi
423 touch -am 1231235999 $$.touch >/dev/null 2>&1 423 touch -am 1231235999 $$.touch >/dev/null 2>&1
424 if test ! -f 1231235999 && test -f $$.touch; t 424 if test ! -f 1231235999 && test -f $$.touch; then
425 shar_touch=touch 425 shar_touch=touch
426 else 426 else
427 shar_touch=: 427 shar_touch=:
428 echo 428 echo
429 $echo 'WARNING: not restoring timestamps. C 429 $echo 'WARNING: not restoring timestamps. Consider getting and'
430 $echo "installing GNU \`touch', distributed 430 $echo "installing GNU \`touch', distributed in GNU File Utilities..."
431 echo 431 echo
432 fi 432 fi
433 rm -f 1231235999 $$.touch 433 rm -f 1231235999 $$.touch
434 # 434 #
435 if mkdir _sh01426; then 435 if mkdir _sh01426; then
436 $echo 'x -' 'creating lock directory' 436 $echo 'x -' 'creating lock directory'
437 else 437 else
438 $echo 'failed to create lock directory' 438 $echo 'failed to create lock directory'
439 exit 1 439 exit 1
440 fi 440 fi
441 # ============= MultiSound.d/setdigital.c ==== 441 # ============= MultiSound.d/setdigital.c ==============
442 if test ! -d 'MultiSound.d'; then 442 if test ! -d 'MultiSound.d'; then
443 $echo 'x -' 'creating directory' 'MultiSound 443 $echo 'x -' 'creating directory' 'MultiSound.d'
444 mkdir 'MultiSound.d' 444 mkdir 'MultiSound.d'
445 fi 445 fi
446 if test -f 'MultiSound.d/setdigital.c' && test 446 if test -f 'MultiSound.d/setdigital.c' && test "$first_param" != -c; then
447 $echo 'x -' SKIPPING 'MultiSound.d/setdigita 447 $echo 'x -' SKIPPING 'MultiSound.d/setdigital.c' '(file already exists)'
448 else 448 else
449 $echo 'x -' extracting 'MultiSound.d/setdigi 449 $echo 'x -' extracting 'MultiSound.d/setdigital.c' '(text)'
450 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/s 450 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/setdigital.c' &&
451 /********************************************* 451 /*********************************************************************
452 X * 452 X *
453 X * setdigital.c - sets the DIGITAL1 input for 453 X * setdigital.c - sets the DIGITAL1 input for a mixer
454 X * 454 X *
455 X * Copyright (C) 1998 Andrew Veliath 455 X * Copyright (C) 1998 Andrew Veliath
456 X * 456 X *
457 X * This program is free software; you can red 457 X * This program is free software; you can redistribute it and/or modify
458 X * it under the terms of the GNU General Publ 458 X * it under the terms of the GNU General Public License as published by
459 X * the Free Software Foundation; either versi 459 X * the Free Software Foundation; either version 2 of the License, or
460 X * (at your option) any later version. 460 X * (at your option) any later version.
461 X * 461 X *
462 X * This program is distributed in the hope th 462 X * This program is distributed in the hope that it will be useful,
463 X * but WITHOUT ANY WARRANTY; without even the 463 X * but WITHOUT ANY WARRANTY; without even the implied warranty of
464 X * MERCHANTABILITY or FITNESS FOR A PARTICULA 464 X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
465 X * GNU General Public License for more detail 465 X * GNU General Public License for more details.
466 X * 466 X *
467 X * You should have received a copy of the GNU 467 X * You should have received a copy of the GNU General Public License
468 X * along with this program; if not, write to 468 X * along with this program; if not, write to the Free Software
469 X * Foundation, Inc., 675 Mass Ave, Cambridge, 469 X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
470 X * 470 X *
471 X ******************************************** 471 X ********************************************************************/
472 X 472 X
473 #include <stdio.h> 473 #include <stdio.h>
474 #include <stdlib.h> 474 #include <stdlib.h>
475 #include <unistd.h> 475 #include <unistd.h>
476 #include <fcntl.h> 476 #include <fcntl.h>
477 #include <sys/types.h> 477 #include <sys/types.h>
478 #include <sys/stat.h> 478 #include <sys/stat.h>
479 #include <sys/ioctl.h> 479 #include <sys/ioctl.h>
480 #include <sys/soundcard.h> 480 #include <sys/soundcard.h>
481 X 481 X
482 int main(int argc, char *argv[]) 482 int main(int argc, char *argv[])
483 { 483 {
484 X int fd; 484 X int fd;
485 X unsigned long recmask, recsrc; 485 X unsigned long recmask, recsrc;
486 X 486 X
487 X if (argc != 2) { 487 X if (argc != 2) {
488 X fprintf(stderr, "usage: setdig 488 X fprintf(stderr, "usage: setdigital <mixer device>\n");
489 X exit(1); 489 X exit(1);
490 X } 490 X }
491 X 491 X
492 X if ((fd = open(argv[1], O_RDWR)) < 0) 492 X if ((fd = open(argv[1], O_RDWR)) < 0) {
493 X perror(argv[1]); 493 X perror(argv[1]);
494 X exit(1); 494 X exit(1);
495 X } 495 X }
496 X 496 X
497 X if (ioctl(fd, SOUND_MIXER_READ_RECMASK 497 X if (ioctl(fd, SOUND_MIXER_READ_RECMASK, &recmask) < 0) {
498 X fprintf(stderr, "error: ioctl 498 X fprintf(stderr, "error: ioctl read recording mask failed\n");
499 X perror("ioctl"); 499 X perror("ioctl");
500 X close(fd); 500 X close(fd);
501 X exit(1); 501 X exit(1);
502 X } 502 X }
503 X 503 X
504 X if (!(recmask & SOUND_MASK_DIGITAL1)) 504 X if (!(recmask & SOUND_MASK_DIGITAL1)) {
505 X fprintf(stderr, "error: cannot 505 X fprintf(stderr, "error: cannot find DIGITAL1 device in mixer\n");
506 X close(fd); 506 X close(fd);
507 X exit(1); 507 X exit(1);
508 X } 508 X }
509 X 509 X
510 X if (ioctl(fd, SOUND_MIXER_READ_RECSRC, 510 X if (ioctl(fd, SOUND_MIXER_READ_RECSRC, &recsrc) < 0) {
511 X fprintf(stderr, "error: ioctl 511 X fprintf(stderr, "error: ioctl read recording source failed\n");
512 X perror("ioctl"); 512 X perror("ioctl");
513 X close(fd); 513 X close(fd);
514 X exit(1); 514 X exit(1);
515 X } 515 X }
516 X 516 X
517 X recsrc |= SOUND_MASK_DIGITAL1; 517 X recsrc |= SOUND_MASK_DIGITAL1;
518 X 518 X
519 X if (ioctl(fd, SOUND_MIXER_WRITE_RECSRC 519 X if (ioctl(fd, SOUND_MIXER_WRITE_RECSRC, &recsrc) < 0) {
520 X fprintf(stderr, "error: ioctl 520 X fprintf(stderr, "error: ioctl write recording source failed\n");
521 X perror("ioctl"); 521 X perror("ioctl");
522 X close(fd); 522 X close(fd);
523 X exit(1); 523 X exit(1);
524 X } 524 X }
525 X 525 X
526 X close(fd); 526 X close(fd);
527 X 527 X
528 X return 0; 528 X return 0;
529 } 529 }
530 SHAR_EOF 530 SHAR_EOF
531 $shar_touch -am 1204092598 'MultiSound.d/set 531 $shar_touch -am 1204092598 'MultiSound.d/setdigital.c' &&
532 chmod 0664 'MultiSound.d/setdigital.c' || 532 chmod 0664 'MultiSound.d/setdigital.c' ||
533 $echo 'restore of' 'MultiSound.d/setdigital. 533 $echo 'restore of' 'MultiSound.d/setdigital.c' 'failed'
534 if ( md5sum --help 2>&1 | grep 'sage: md5sum 534 if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
535 && ( md5sum --version 2>&1 | grep -v 'textut 535 && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
536 md5sum -c << SHAR_EOF >/dev/null 2>&1 \ 536 md5sum -c << SHAR_EOF >/dev/null 2>&1 \
537 || $echo 'MultiSound.d/setdigital.c:' 'MD5 537 || $echo 'MultiSound.d/setdigital.c:' 'MD5 check failed'
538 e87217fc3e71288102ba41fd81f71ec4 MultiSound.d 538 e87217fc3e71288102ba41fd81f71ec4 MultiSound.d/setdigital.c
539 SHAR_EOF 539 SHAR_EOF
540 else 540 else
541 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c 541 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/setdigital.c'`"
542 test 2064 -eq "$shar_count" || 542 test 2064 -eq "$shar_count" ||
543 $echo 'MultiSound.d/setdigital.c:' 'origin 543 $echo 'MultiSound.d/setdigital.c:' 'original size' '2064,' 'current size' "$shar_count!"
544 fi 544 fi
545 fi 545 fi
546 # ============= MultiSound.d/pinnaclecfg.c === 546 # ============= MultiSound.d/pinnaclecfg.c ==============
547 if test -f 'MultiSound.d/pinnaclecfg.c' && tes 547 if test -f 'MultiSound.d/pinnaclecfg.c' && test "$first_param" != -c; then
548 $echo 'x -' SKIPPING 'MultiSound.d/pinnaclec 548 $echo 'x -' SKIPPING 'MultiSound.d/pinnaclecfg.c' '(file already exists)'
549 else 549 else
550 $echo 'x -' extracting 'MultiSound.d/pinnacl 550 $echo 'x -' extracting 'MultiSound.d/pinnaclecfg.c' '(text)'
551 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/p 551 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/pinnaclecfg.c' &&
552 /********************************************* 552 /*********************************************************************
553 X * 553 X *
554 X * pinnaclecfg.c - Pinnacle/Fiji Device Confi 554 X * pinnaclecfg.c - Pinnacle/Fiji Device Configuration Program
555 X * 555 X *
556 X * This is for NON-PnP mode only. For PnP mo 556 X * This is for NON-PnP mode only. For PnP mode, use isapnptools.
557 X * 557 X *
558 X * This is Linux-specific, and must be run wi 558 X * This is Linux-specific, and must be run with root permissions.
559 X * 559 X *
560 X * Part of the Turtle Beach MultiSound Sound 560 X * Part of the Turtle Beach MultiSound Sound Card Driver for Linux
561 X * 561 X *
562 X * Copyright (C) 1998 Andrew Veliath 562 X * Copyright (C) 1998 Andrew Veliath
563 X * 563 X *
564 X * This program is free software; you can red 564 X * This program is free software; you can redistribute it and/or modify
565 X * it under the terms of the GNU General Publ 565 X * it under the terms of the GNU General Public License as published by
566 X * the Free Software Foundation; either versi 566 X * the Free Software Foundation; either version 2 of the License, or
567 X * (at your option) any later version. 567 X * (at your option) any later version.
568 X * 568 X *
569 X * This program is distributed in the hope th 569 X * This program is distributed in the hope that it will be useful,
570 X * but WITHOUT ANY WARRANTY; without even the 570 X * but WITHOUT ANY WARRANTY; without even the implied warranty of
571 X * MERCHANTABILITY or FITNESS FOR A PARTICULA 571 X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
572 X * GNU General Public License for more detail 572 X * GNU General Public License for more details.
573 X * 573 X *
574 X * You should have received a copy of the GNU 574 X * You should have received a copy of the GNU General Public License
575 X * along with this program; if not, write to 575 X * along with this program; if not, write to the Free Software
576 X * Foundation, Inc., 675 Mass Ave, Cambridge, 576 X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
577 X * 577 X *
578 X ******************************************** 578 X ********************************************************************/
579 X 579 X
580 #include <stdio.h> 580 #include <stdio.h>
581 #include <stdlib.h> 581 #include <stdlib.h>
582 #include <string.h> 582 #include <string.h>
583 #include <errno.h> 583 #include <errno.h>
584 #include <unistd.h> 584 #include <unistd.h>
585 #include <asm/types.h> 585 #include <asm/types.h>
586 #include <sys/io.h> 586 #include <sys/io.h>
587 X 587 X
588 #define IREG_LOGDEVICE 0x07 588 #define IREG_LOGDEVICE 0x07
589 #define IREG_ACTIVATE 0x30 589 #define IREG_ACTIVATE 0x30
590 #define LD_ACTIVATE 0x01 590 #define LD_ACTIVATE 0x01
591 #define LD_DISACTIVATE 0x00 591 #define LD_DISACTIVATE 0x00
592 #define IREG_EECONTROL 0x3F 592 #define IREG_EECONTROL 0x3F
593 #define IREG_MEMBASEHI 0x40 593 #define IREG_MEMBASEHI 0x40
594 #define IREG_MEMBASELO 0x41 594 #define IREG_MEMBASELO 0x41
595 #define IREG_MEMCONTROL 0x42 595 #define IREG_MEMCONTROL 0x42
596 #define IREG_MEMRANGEHI 0x43 596 #define IREG_MEMRANGEHI 0x43
597 #define IREG_MEMRANGELO 0x44 597 #define IREG_MEMRANGELO 0x44
598 #define MEMTYPE_8BIT 0x00 598 #define MEMTYPE_8BIT 0x00
599 #define MEMTYPE_16BIT 0x02 599 #define MEMTYPE_16BIT 0x02
600 #define MEMTYPE_RANGE 0x00 600 #define MEMTYPE_RANGE 0x00
601 #define MEMTYPE_HIADDR 0x01 601 #define MEMTYPE_HIADDR 0x01
602 #define IREG_IO0_BASEHI 0x60 602 #define IREG_IO0_BASEHI 0x60
603 #define IREG_IO0_BASELO 0x61 603 #define IREG_IO0_BASELO 0x61
604 #define IREG_IO1_BASEHI 0x62 604 #define IREG_IO1_BASEHI 0x62
605 #define IREG_IO1_BASELO 0x63 605 #define IREG_IO1_BASELO 0x63
606 #define IREG_IRQ_NUMBER 0x70 606 #define IREG_IRQ_NUMBER 0x70
607 #define IREG_IRQ_TYPE 0x71 607 #define IREG_IRQ_TYPE 0x71
608 #define IRQTYPE_HIGH 0x02 608 #define IRQTYPE_HIGH 0x02
609 #define IRQTYPE_LOW 0x00 609 #define IRQTYPE_LOW 0x00
610 #define IRQTYPE_LEVEL 0x01 610 #define IRQTYPE_LEVEL 0x01
611 #define IRQTYPE_EDGE 0x00 611 #define IRQTYPE_EDGE 0x00
612 X 612 X
613 #define HIBYTE(w) ((BYTE)(((WORD 613 #define HIBYTE(w) ((BYTE)(((WORD)(w) >> 8) & 0xFF))
614 #define LOBYTE(w) ((BYTE)(w)) 614 #define LOBYTE(w) ((BYTE)(w))
615 #define MAKEWORD(low,hi) ((WORD)(((BYTE 615 #define MAKEWORD(low,hi) ((WORD)(((BYTE)(low))|(((WORD)((BYTE)(hi)))<<8)))
616 X 616 X
617 typedef __u8 BYTE; 617 typedef __u8 BYTE;
618 typedef __u16 USHORT; 618 typedef __u16 USHORT;
619 typedef __u16 WORD; 619 typedef __u16 WORD;
620 X 620 X
621 static int config_port = -1; 621 static int config_port = -1;
622 X 622 X
623 static int msnd_write_cfg(int cfg, int reg, in 623 static int msnd_write_cfg(int cfg, int reg, int value)
624 { 624 {
625 X outb(reg, cfg); 625 X outb(reg, cfg);
626 X outb(value, cfg + 1); 626 X outb(value, cfg + 1);
627 X if (value != inb(cfg + 1)) { 627 X if (value != inb(cfg + 1)) {
628 X fprintf(stderr, "error: msnd_w 628 X fprintf(stderr, "error: msnd_write_cfg: I/O error\n");
629 X return -EIO; 629 X return -EIO;
630 X } 630 X }
631 X return 0; 631 X return 0;
632 } 632 }
633 X 633 X
634 static int msnd_read_cfg(int cfg, int reg) 634 static int msnd_read_cfg(int cfg, int reg)
635 { 635 {
636 X outb(reg, cfg); 636 X outb(reg, cfg);
637 X return inb(cfg + 1); 637 X return inb(cfg + 1);
638 } 638 }
639 X 639 X
640 static int msnd_write_cfg_io0(int cfg, int num 640 static int msnd_write_cfg_io0(int cfg, int num, WORD io)
641 { 641 {
642 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE 642 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
643 X return -EIO; 643 X return -EIO;
644 X if (msnd_write_cfg(cfg, IREG_IO0_BASEH 644 X if (msnd_write_cfg(cfg, IREG_IO0_BASEHI, HIBYTE(io)))
645 X return -EIO; 645 X return -EIO;
646 X if (msnd_write_cfg(cfg, IREG_IO0_BASEL 646 X if (msnd_write_cfg(cfg, IREG_IO0_BASELO, LOBYTE(io)))
647 X return -EIO; 647 X return -EIO;
648 X return 0; 648 X return 0;
649 } 649 }
650 X 650 X
651 static int msnd_read_cfg_io0(int cfg, int num, 651 static int msnd_read_cfg_io0(int cfg, int num, WORD *io)
652 { 652 {
653 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE 653 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
654 X return -EIO; 654 X return -EIO;
655 X 655 X
656 X *io = MAKEWORD(msnd_read_cfg(cfg, IREG 656 X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO0_BASELO),
657 X msnd_read_cfg(cfg, IREG 657 X msnd_read_cfg(cfg, IREG_IO0_BASEHI));
658 X 658 X
659 X return 0; 659 X return 0;
660 } 660 }
661 X 661 X
662 static int msnd_write_cfg_io1(int cfg, int num 662 static int msnd_write_cfg_io1(int cfg, int num, WORD io)
663 { 663 {
664 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE 664 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
665 X return -EIO; 665 X return -EIO;
666 X if (msnd_write_cfg(cfg, IREG_IO1_BASEH 666 X if (msnd_write_cfg(cfg, IREG_IO1_BASEHI, HIBYTE(io)))
667 X return -EIO; 667 X return -EIO;
668 X if (msnd_write_cfg(cfg, IREG_IO1_BASEL 668 X if (msnd_write_cfg(cfg, IREG_IO1_BASELO, LOBYTE(io)))
669 X return -EIO; 669 X return -EIO;
670 X return 0; 670 X return 0;
671 } 671 }
672 X 672 X
673 static int msnd_read_cfg_io1(int cfg, int num, 673 static int msnd_read_cfg_io1(int cfg, int num, WORD *io)
674 { 674 {
675 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE 675 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
676 X return -EIO; 676 X return -EIO;
677 X 677 X
678 X *io = MAKEWORD(msnd_read_cfg(cfg, IREG 678 X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO1_BASELO),
679 X msnd_read_cfg(cfg, IREG 679 X msnd_read_cfg(cfg, IREG_IO1_BASEHI));
680 X 680 X
681 X return 0; 681 X return 0;
682 } 682 }
683 X 683 X
684 static int msnd_write_cfg_irq(int cfg, int num 684 static int msnd_write_cfg_irq(int cfg, int num, WORD irq)
685 { 685 {
686 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE 686 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
687 X return -EIO; 687 X return -EIO;
688 X if (msnd_write_cfg(cfg, IREG_IRQ_NUMBE 688 X if (msnd_write_cfg(cfg, IREG_IRQ_NUMBER, LOBYTE(irq)))
689 X return -EIO; 689 X return -EIO;
690 X if (msnd_write_cfg(cfg, IREG_IRQ_TYPE, 690 X if (msnd_write_cfg(cfg, IREG_IRQ_TYPE, IRQTYPE_EDGE))
691 X return -EIO; 691 X return -EIO;
692 X return 0; 692 X return 0;
693 } 693 }
694 X 694 X
695 static int msnd_read_cfg_irq(int cfg, int num, 695 static int msnd_read_cfg_irq(int cfg, int num, WORD *irq)
696 { 696 {
697 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE 697 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
698 X return -EIO; 698 X return -EIO;
699 X 699 X
700 X *irq = msnd_read_cfg(cfg, IREG_IRQ_NUM 700 X *irq = msnd_read_cfg(cfg, IREG_IRQ_NUMBER);
701 X 701 X
702 X return 0; 702 X return 0;
703 } 703 }
704 X 704 X
705 static int msnd_write_cfg_mem(int cfg, int num 705 static int msnd_write_cfg_mem(int cfg, int num, int mem)
706 { 706 {
707 X WORD wmem; 707 X WORD wmem;
708 X 708 X
709 X mem >>= 8; 709 X mem >>= 8;
710 X mem &= 0xfff; 710 X mem &= 0xfff;
711 X wmem = (WORD)mem; 711 X wmem = (WORD)mem;
712 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE 712 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
713 X return -EIO; 713 X return -EIO;
714 X if (msnd_write_cfg(cfg, IREG_MEMBASEHI 714 X if (msnd_write_cfg(cfg, IREG_MEMBASEHI, HIBYTE(wmem)))
715 X return -EIO; 715 X return -EIO;
716 X if (msnd_write_cfg(cfg, IREG_MEMBASELO 716 X if (msnd_write_cfg(cfg, IREG_MEMBASELO, LOBYTE(wmem)))
717 X return -EIO; 717 X return -EIO;
718 X if (wmem && msnd_write_cfg(cfg, IREG_M 718 X if (wmem && msnd_write_cfg(cfg, IREG_MEMCONTROL, (MEMTYPE_HIADDR | MEMTYPE_16BIT)))
719 X return -EIO; 719 X return -EIO;
720 X return 0; 720 X return 0;
721 } 721 }
722 X 722 X
723 static int msnd_read_cfg_mem(int cfg, int num, 723 static int msnd_read_cfg_mem(int cfg, int num, int *mem)
724 { 724 {
725 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE 725 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
726 X return -EIO; 726 X return -EIO;
727 X 727 X
728 X *mem = MAKEWORD(msnd_read_cfg(cfg, IRE 728 X *mem = MAKEWORD(msnd_read_cfg(cfg, IREG_MEMBASELO),
729 X msnd_read_cfg(cfg, IRE 729 X msnd_read_cfg(cfg, IREG_MEMBASEHI));
730 X *mem <<= 8; 730 X *mem <<= 8;
731 X 731 X
732 X return 0; 732 X return 0;
733 } 733 }
734 X 734 X
735 static int msnd_activate_logical(int cfg, int 735 static int msnd_activate_logical(int cfg, int num)
736 { 736 {
737 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE 737 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
738 X return -EIO; 738 X return -EIO;
739 X if (msnd_write_cfg(cfg, IREG_ACTIVATE, 739 X if (msnd_write_cfg(cfg, IREG_ACTIVATE, LD_ACTIVATE))
740 X return -EIO; 740 X return -EIO;
741 X return 0; 741 X return 0;
742 } 742 }
743 X 743 X
744 static int msnd_write_cfg_logical(int cfg, int 744 static int msnd_write_cfg_logical(int cfg, int num, WORD io0, WORD io1, WORD irq, int mem)
745 { 745 {
746 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE 746 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
747 X return -EIO; 747 X return -EIO;
748 X if (msnd_write_cfg_io0(cfg, num, io0)) 748 X if (msnd_write_cfg_io0(cfg, num, io0))
749 X return -EIO; 749 X return -EIO;
750 X if (msnd_write_cfg_io1(cfg, num, io1)) 750 X if (msnd_write_cfg_io1(cfg, num, io1))
751 X return -EIO; 751 X return -EIO;
752 X if (msnd_write_cfg_irq(cfg, num, irq)) 752 X if (msnd_write_cfg_irq(cfg, num, irq))
753 X return -EIO; 753 X return -EIO;
754 X if (msnd_write_cfg_mem(cfg, num, mem)) 754 X if (msnd_write_cfg_mem(cfg, num, mem))
755 X return -EIO; 755 X return -EIO;
756 X if (msnd_activate_logical(cfg, num)) 756 X if (msnd_activate_logical(cfg, num))
757 X return -EIO; 757 X return -EIO;
758 X return 0; 758 X return 0;
759 } 759 }
760 X 760 X
761 static int msnd_read_cfg_logical(int cfg, int 761 static int msnd_read_cfg_logical(int cfg, int num, WORD *io0, WORD *io1, WORD *irq, int *mem)
762 { 762 {
763 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE 763 X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
764 X return -EIO; 764 X return -EIO;
765 X if (msnd_read_cfg_io0(cfg, num, io0)) 765 X if (msnd_read_cfg_io0(cfg, num, io0))
766 X return -EIO; 766 X return -EIO;
767 X if (msnd_read_cfg_io1(cfg, num, io1)) 767 X if (msnd_read_cfg_io1(cfg, num, io1))
768 X return -EIO; 768 X return -EIO;
769 X if (msnd_read_cfg_irq(cfg, num, irq)) 769 X if (msnd_read_cfg_irq(cfg, num, irq))
770 X return -EIO; 770 X return -EIO;
771 X if (msnd_read_cfg_mem(cfg, num, mem)) 771 X if (msnd_read_cfg_mem(cfg, num, mem))
772 X return -EIO; 772 X return -EIO;
773 X return 0; 773 X return 0;
774 } 774 }
775 X 775 X
776 static void usage(void) 776 static void usage(void)
777 { 777 {
778 X fprintf(stderr, 778 X fprintf(stderr,
779 X "\n" 779 X "\n"
780 X "pinnaclecfg 1.0\n" 780 X "pinnaclecfg 1.0\n"
781 X "\n" 781 X "\n"
782 X "usage: pinnaclecfg <config po 782 X "usage: pinnaclecfg <config port> [device config]\n"
783 X "\n" 783 X "\n"
784 X "This is for use with the card 784 X "This is for use with the card in NON-PnP mode only.\n"
785 X "\n" 785 X "\n"
786 X "Available devices (not all av 786 X "Available devices (not all available for Fiji):\n"
787 X "\n" 787 X "\n"
788 X " Device 788 X " Device Description\n"
789 X " --------------------- 789 X " -------------------------------------------------------------------\n"
790 X " reset 790 X " reset Reset all devices (i.e. disable)\n"
791 X " show 791 X " show Display current device configurations\n"
792 X "\n" 792 X "\n"
793 X " dsp <io> <irq> <mem> 793 X " dsp <io> <irq> <mem> Audio device\n"
794 X " mpu <io> <irq> 794 X " mpu <io> <irq> Internal Kurzweil synth\n"
795 X " ide <io0> <io1> <irq> 795 X " ide <io0> <io1> <irq> On-board IDE controller\n"
796 X " joystick <io> 796 X " joystick <io> Joystick port\n"
797 X "\n"); 797 X "\n");
798 X exit(1); 798 X exit(1);
799 } 799 }
800 X 800 X
801 static int cfg_reset(void) 801 static int cfg_reset(void)
802 { 802 {
803 X int i; 803 X int i;
804 X 804 X
805 X for (i = 0; i < 4; ++i) 805 X for (i = 0; i < 4; ++i)
806 X msnd_write_cfg_logical(config_ 806 X msnd_write_cfg_logical(config_port, i, 0, 0, 0, 0);
807 X 807 X
808 X return 0; 808 X return 0;
809 } 809 }
810 X 810 X
811 static int cfg_show(void) 811 static int cfg_show(void)
812 { 812 {
813 X int i; 813 X int i;
814 X int count = 0; 814 X int count = 0;
815 X 815 X
816 X for (i = 0; i < 4; ++i) { 816 X for (i = 0; i < 4; ++i) {
817 X WORD io0, io1, irq; 817 X WORD io0, io1, irq;
818 X int mem; 818 X int mem;
819 X msnd_read_cfg_logical(config_p 819 X msnd_read_cfg_logical(config_port, i, &io0, &io1, &irq, &mem);
820 X switch (i) { 820 X switch (i) {
821 X case 0: 821 X case 0:
822 X if (io0 || irq || mem) 822 X if (io0 || irq || mem) {
823 X printf("dsp 0x 823 X printf("dsp 0x%x %d 0x%x\n", io0, irq, mem);
824 X ++count; 824 X ++count;
825 X } 825 X }
826 X break; 826 X break;
827 X case 1: 827 X case 1:
828 X if (io0 || irq) { 828 X if (io0 || irq) {
829 X printf("mpu 0x 829 X printf("mpu 0x%x %d\n", io0, irq);
830 X ++count; 830 X ++count;
831 X } 831 X }
832 X break; 832 X break;
833 X case 2: 833 X case 2:
834 X if (io0 || io1 || irq) 834 X if (io0 || io1 || irq) {
835 X printf("ide 0x 835 X printf("ide 0x%x 0x%x %d\n", io0, io1, irq);
836 X ++count; 836 X ++count;
837 X } 837 X }
838 X break; 838 X break;
839 X case 3: 839 X case 3:
840 X if (io0) { 840 X if (io0) {
841 X printf("joysti 841 X printf("joystick 0x%x\n", io0);
842 X ++count; 842 X ++count;
843 X } 843 X }
844 X break; 844 X break;
845 X } 845 X }
846 X } 846 X }
847 X 847 X
848 X if (count == 0) 848 X if (count == 0)
849 X fprintf(stderr, "no devices co 849 X fprintf(stderr, "no devices configured\n");
850 X 850 X
851 X return 0; 851 X return 0;
852 } 852 }
853 X 853 X
854 static int cfg_dsp(int argc, char *argv[]) 854 static int cfg_dsp(int argc, char *argv[])
855 { 855 {
856 X int io, irq, mem; 856 X int io, irq, mem;
857 X 857 X
858 X if (argc < 3 || 858 X if (argc < 3 ||
859 X sscanf(argv[0], "0x%x", &io) != 1 859 X sscanf(argv[0], "0x%x", &io) != 1 ||
860 X sscanf(argv[1], "%d", &irq) != 1 | 860 X sscanf(argv[1], "%d", &irq) != 1 ||
861 X sscanf(argv[2], "0x%x", &mem) != 1 861 X sscanf(argv[2], "0x%x", &mem) != 1)
862 X usage(); 862 X usage();
863 X 863 X
864 X if (!(io == 0x290 || 864 X if (!(io == 0x290 ||
865 X io == 0x260 || 865 X io == 0x260 ||
866 X io == 0x250 || 866 X io == 0x250 ||
867 X io == 0x240 || 867 X io == 0x240 ||
868 X io == 0x230 || 868 X io == 0x230 ||
869 X io == 0x220 || 869 X io == 0x220 ||
870 X io == 0x210 || 870 X io == 0x210 ||
871 X io == 0x3e0)) { 871 X io == 0x3e0)) {
872 X fprintf(stderr, "error: io mus 872 X fprintf(stderr, "error: io must be one of "
873 X "210, 220, 230, 240, 2 873 X "210, 220, 230, 240, 250, 260, 290, or 3E0\n");
874 X usage(); 874 X usage();
875 X } 875 X }
876 X 876 X
877 X if (!(irq == 5 || 877 X if (!(irq == 5 ||
878 X irq == 7 || 878 X irq == 7 ||
879 X irq == 9 || 879 X irq == 9 ||
880 X irq == 10 || 880 X irq == 10 ||
881 X irq == 11 || 881 X irq == 11 ||
882 X irq == 12)) { 882 X irq == 12)) {
883 X fprintf(stderr, "error: irq mu 883 X fprintf(stderr, "error: irq must be one of "
884 X "5, 7, 9, 10, 11 or 12 884 X "5, 7, 9, 10, 11 or 12\n");
885 X usage(); 885 X usage();
886 X } 886 X }
887 X 887 X
888 X if (!(mem == 0xb0000 || 888 X if (!(mem == 0xb0000 ||
889 X mem == 0xc8000 || 889 X mem == 0xc8000 ||
890 X mem == 0xd0000 || 890 X mem == 0xd0000 ||
891 X mem == 0xd8000 || 891 X mem == 0xd8000 ||
892 X mem == 0xe0000 || 892 X mem == 0xe0000 ||
893 X mem == 0xe8000)) { 893 X mem == 0xe8000)) {
894 X fprintf(stderr, "error: mem mu 894 X fprintf(stderr, "error: mem must be one of "
895 X "0xb0000, 0xc8000, 0xd 895 X "0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000\n");
896 X usage(); 896 X usage();
897 X } 897 X }
898 X 898 X
899 X return msnd_write_cfg_logical(config_p 899 X return msnd_write_cfg_logical(config_port, 0, io, 0, irq, mem);
900 } 900 }
901 X 901 X
902 static int cfg_mpu(int argc, char *argv[]) 902 static int cfg_mpu(int argc, char *argv[])
903 { 903 {
904 X int io, irq; 904 X int io, irq;
905 X 905 X
906 X if (argc < 2 || 906 X if (argc < 2 ||
907 X sscanf(argv[0], "0x%x", &io) != 1 907 X sscanf(argv[0], "0x%x", &io) != 1 ||
908 X sscanf(argv[1], "%d", &irq) != 1) 908 X sscanf(argv[1], "%d", &irq) != 1)
909 X usage(); 909 X usage();
910 X 910 X
911 X return msnd_write_cfg_logical(config_p 911 X return msnd_write_cfg_logical(config_port, 1, io, 0, irq, 0);
912 } 912 }
913 X 913 X
914 static int cfg_ide(int argc, char *argv[]) 914 static int cfg_ide(int argc, char *argv[])
915 { 915 {
916 X int io0, io1, irq; 916 X int io0, io1, irq;
917 X 917 X
918 X if (argc < 3 || 918 X if (argc < 3 ||
919 X sscanf(argv[0], "0x%x", &io0) != 1 919 X sscanf(argv[0], "0x%x", &io0) != 1 ||
920 X sscanf(argv[0], "0x%x", &io1) != 1 920 X sscanf(argv[0], "0x%x", &io1) != 1 ||
921 X sscanf(argv[1], "%d", &irq) != 1) 921 X sscanf(argv[1], "%d", &irq) != 1)
922 X usage(); 922 X usage();
923 X 923 X
924 X return msnd_write_cfg_logical(config_p 924 X return msnd_write_cfg_logical(config_port, 2, io0, io1, irq, 0);
925 } 925 }
926 X 926 X
927 static int cfg_joystick(int argc, char *argv[] 927 static int cfg_joystick(int argc, char *argv[])
928 { 928 {
929 X int io; 929 X int io;
930 X 930 X
931 X if (argc < 1 || 931 X if (argc < 1 ||
932 X sscanf(argv[0], "0x%x", &io) != 1) 932 X sscanf(argv[0], "0x%x", &io) != 1)
933 X usage(); 933 X usage();
934 X 934 X
935 X return msnd_write_cfg_logical(config_p 935 X return msnd_write_cfg_logical(config_port, 3, io, 0, 0, 0);
936 } 936 }
937 X 937 X
938 int main(int argc, char *argv[]) 938 int main(int argc, char *argv[])
939 { 939 {
940 X char *device; 940 X char *device;
941 X int rv = 0; 941 X int rv = 0;
942 X 942 X
943 X --argc; ++argv; 943 X --argc; ++argv;
944 X 944 X
945 X if (argc < 2) 945 X if (argc < 2)
946 X usage(); 946 X usage();
947 X 947 X
948 X sscanf(argv[0], "0x%x", &config_port); 948 X sscanf(argv[0], "0x%x", &config_port);
949 X if (config_port != 0x250 && config_por 949 X if (config_port != 0x250 && config_port != 0x260 && config_port != 0x270) {
950 X fprintf(stderr, "error: <confi 950 X fprintf(stderr, "error: <config port> must be 0x250, 0x260 or 0x270\n");
951 X exit(1); 951 X exit(1);
952 X } 952 X }
953 X if (ioperm(config_port, 2, 1)) { 953 X if (ioperm(config_port, 2, 1)) {
954 X perror("ioperm"); 954 X perror("ioperm");
955 X fprintf(stderr, "note: pinnacl 955 X fprintf(stderr, "note: pinnaclecfg must be run as root\n");
956 X exit(1); 956 X exit(1);
957 X } 957 X }
958 X device = argv[1]; 958 X device = argv[1];
959 X 959 X
960 X argc -= 2; argv += 2; 960 X argc -= 2; argv += 2;
961 X 961 X
962 X if (strcmp(device, "reset") == 0) 962 X if (strcmp(device, "reset") == 0)
963 X rv = cfg_reset(); 963 X rv = cfg_reset();
964 X else if (strcmp(device, "show") == 0) 964 X else if (strcmp(device, "show") == 0)
965 X rv = cfg_show(); 965 X rv = cfg_show();
966 X else if (strcmp(device, "dsp") == 0) 966 X else if (strcmp(device, "dsp") == 0)
967 X rv = cfg_dsp(argc, argv); 967 X rv = cfg_dsp(argc, argv);
968 X else if (strcmp(device, "mpu") == 0) 968 X else if (strcmp(device, "mpu") == 0)
969 X rv = cfg_mpu(argc, argv); 969 X rv = cfg_mpu(argc, argv);
970 X else if (strcmp(device, "ide") == 0) 970 X else if (strcmp(device, "ide") == 0)
971 X rv = cfg_ide(argc, argv); 971 X rv = cfg_ide(argc, argv);
972 X else if (strcmp(device, "joystick") == 972 X else if (strcmp(device, "joystick") == 0)
973 X rv = cfg_joystick(argc, argv); 973 X rv = cfg_joystick(argc, argv);
974 X else { 974 X else {
975 X fprintf(stderr, "error: unknow 975 X fprintf(stderr, "error: unknown device %s\n", device);
976 X usage(); 976 X usage();
977 X } 977 X }
978 X 978 X
979 X if (rv) 979 X if (rv)
980 X fprintf(stderr, "error: device 980 X fprintf(stderr, "error: device configuration failed\n");
981 X 981 X
982 X return 0; 982 X return 0;
983 } 983 }
984 SHAR_EOF 984 SHAR_EOF
985 $shar_touch -am 1204092598 'MultiSound.d/pin 985 $shar_touch -am 1204092598 'MultiSound.d/pinnaclecfg.c' &&
986 chmod 0664 'MultiSound.d/pinnaclecfg.c' || 986 chmod 0664 'MultiSound.d/pinnaclecfg.c' ||
987 $echo 'restore of' 'MultiSound.d/pinnaclecfg 987 $echo 'restore of' 'MultiSound.d/pinnaclecfg.c' 'failed'
988 if ( md5sum --help 2>&1 | grep 'sage: md5sum 988 if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
989 && ( md5sum --version 2>&1 | grep -v 'textut 989 && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
990 md5sum -c << SHAR_EOF >/dev/null 2>&1 \ 990 md5sum -c << SHAR_EOF >/dev/null 2>&1 \
991 || $echo 'MultiSound.d/pinnaclecfg.c:' 'MD 991 || $echo 'MultiSound.d/pinnaclecfg.c:' 'MD5 check failed'
992 366bdf27f0db767a3c7921d0a6db20fe MultiSound.d 992 366bdf27f0db767a3c7921d0a6db20fe MultiSound.d/pinnaclecfg.c
993 SHAR_EOF 993 SHAR_EOF
994 else 994 else
995 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c 995 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/pinnaclecfg.c'`"
996 test 10224 -eq "$shar_count" || 996 test 10224 -eq "$shar_count" ||
997 $echo 'MultiSound.d/pinnaclecfg.c:' 'origi 997 $echo 'MultiSound.d/pinnaclecfg.c:' 'original size' '10224,' 'current size' "$shar_count!"
998 fi 998 fi
999 fi 999 fi
1000 # ============= MultiSound.d/Makefile ======= 1000 # ============= MultiSound.d/Makefile ==============
1001 if test -f 'MultiSound.d/Makefile' && test "$ 1001 if test -f 'MultiSound.d/Makefile' && test "$first_param" != -c; then
1002 $echo 'x -' SKIPPING 'MultiSound.d/Makefile 1002 $echo 'x -' SKIPPING 'MultiSound.d/Makefile' '(file already exists)'
1003 else 1003 else
1004 $echo 'x -' extracting 'MultiSound.d/Makefi 1004 $echo 'x -' extracting 'MultiSound.d/Makefile' '(text)'
1005 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/ 1005 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/Makefile' &&
1006 CC = gcc 1006 CC = gcc
1007 CFLAGS = -O 1007 CFLAGS = -O
1008 PROGS = setdigital msndreset pinnaclecfg co 1008 PROGS = setdigital msndreset pinnaclecfg conv
1009 X 1009 X
1010 all: $(PROGS) 1010 all: $(PROGS)
1011 X 1011 X
1012 clean: 1012 clean:
1013 X rm -f $(PROGS) 1013 X rm -f $(PROGS)
1014 SHAR_EOF 1014 SHAR_EOF
1015 $shar_touch -am 1204092398 'MultiSound.d/Ma 1015 $shar_touch -am 1204092398 'MultiSound.d/Makefile' &&
1016 chmod 0664 'MultiSound.d/Makefile' || 1016 chmod 0664 'MultiSound.d/Makefile' ||
1017 $echo 'restore of' 'MultiSound.d/Makefile' 1017 $echo 'restore of' 'MultiSound.d/Makefile' 'failed'
1018 if ( md5sum --help 2>&1 | grep 'sage: md5su 1018 if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
1019 && ( md5sum --version 2>&1 | grep -v 'textu 1019 && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
1020 md5sum -c << SHAR_EOF >/dev/null 2>&1 \ 1020 md5sum -c << SHAR_EOF >/dev/null 2>&1 \
1021 || $echo 'MultiSound.d/Makefile:' 'MD5 ch 1021 || $echo 'MultiSound.d/Makefile:' 'MD5 check failed'
1022 76ca8bb44e3882edcf79c97df6c81845 MultiSound. 1022 76ca8bb44e3882edcf79c97df6c81845 MultiSound.d/Makefile
1023 SHAR_EOF 1023 SHAR_EOF
1024 else 1024 else
1025 shar_count="`LC_ALL= LC_CTYPE= LANG= wc - 1025 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/Makefile'`"
1026 test 106 -eq "$shar_count" || 1026 test 106 -eq "$shar_count" ||
1027 $echo 'MultiSound.d/Makefile:' 'original 1027 $echo 'MultiSound.d/Makefile:' 'original size' '106,' 'current size' "$shar_count!"
1028 fi 1028 fi
1029 fi 1029 fi
1030 # ============= MultiSound.d/conv.l ========= 1030 # ============= MultiSound.d/conv.l ==============
1031 if test -f 'MultiSound.d/conv.l' && test "$fi 1031 if test -f 'MultiSound.d/conv.l' && test "$first_param" != -c; then
1032 $echo 'x -' SKIPPING 'MultiSound.d/conv.l' 1032 $echo 'x -' SKIPPING 'MultiSound.d/conv.l' '(file already exists)'
1033 else 1033 else
1034 $echo 'x -' extracting 'MultiSound.d/conv.l 1034 $echo 'x -' extracting 'MultiSound.d/conv.l' '(text)'
1035 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/ 1035 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/conv.l' &&
1036 %% 1036 %%
1037 [ \n\t,\r] 1037 [ \n\t,\r]
1038 \;.* 1038 \;.*
1039 DB 1039 DB
1040 [0-9A-Fa-f]+H { int n; sscanf(yytext, "%xH" 1040 [0-9A-Fa-f]+H { int n; sscanf(yytext, "%xH", &n); printf("%c", n); }
1041 %% 1041 %%
1042 int yywrap() { return 1; } 1042 int yywrap() { return 1; }
1043 void main() { yylex(); } 1043 void main() { yylex(); }
1044 SHAR_EOF 1044 SHAR_EOF
1045 $shar_touch -am 0828231798 'MultiSound.d/co 1045 $shar_touch -am 0828231798 'MultiSound.d/conv.l' &&
1046 chmod 0664 'MultiSound.d/conv.l' || 1046 chmod 0664 'MultiSound.d/conv.l' ||
1047 $echo 'restore of' 'MultiSound.d/conv.l' 'f 1047 $echo 'restore of' 'MultiSound.d/conv.l' 'failed'
1048 if ( md5sum --help 2>&1 | grep 'sage: md5su 1048 if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
1049 && ( md5sum --version 2>&1 | grep -v 'textu 1049 && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
1050 md5sum -c << SHAR_EOF >/dev/null 2>&1 \ 1050 md5sum -c << SHAR_EOF >/dev/null 2>&1 \
1051 || $echo 'MultiSound.d/conv.l:' 'MD5 chec 1051 || $echo 'MultiSound.d/conv.l:' 'MD5 check failed'
1052 d2411fc32cd71a00dcdc1f009e858dd2 MultiSound. 1052 d2411fc32cd71a00dcdc1f009e858dd2 MultiSound.d/conv.l
1053 SHAR_EOF 1053 SHAR_EOF
1054 else 1054 else
1055 shar_count="`LC_ALL= LC_CTYPE= LANG= wc - 1055 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/conv.l'`"
1056 test 146 -eq "$shar_count" || 1056 test 146 -eq "$shar_count" ||
1057 $echo 'MultiSound.d/conv.l:' 'original si 1057 $echo 'MultiSound.d/conv.l:' 'original size' '146,' 'current size' "$shar_count!"
1058 fi 1058 fi
1059 fi 1059 fi
1060 # ============= MultiSound.d/msndreset.c ==== 1060 # ============= MultiSound.d/msndreset.c ==============
1061 if test -f 'MultiSound.d/msndreset.c' && test 1061 if test -f 'MultiSound.d/msndreset.c' && test "$first_param" != -c; then
1062 $echo 'x -' SKIPPING 'MultiSound.d/msndrese 1062 $echo 'x -' SKIPPING 'MultiSound.d/msndreset.c' '(file already exists)'
1063 else 1063 else
1064 $echo 'x -' extracting 'MultiSound.d/msndre 1064 $echo 'x -' extracting 'MultiSound.d/msndreset.c' '(text)'
1065 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/ 1065 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/msndreset.c' &&
1066 /******************************************** 1066 /*********************************************************************
1067 X * 1067 X *
1068 X * msndreset.c - resets the MultiSound card 1068 X * msndreset.c - resets the MultiSound card
1069 X * 1069 X *
1070 X * Copyright (C) 1998 Andrew Veliath 1070 X * Copyright (C) 1998 Andrew Veliath
1071 X * 1071 X *
1072 X * This program is free software; you can re 1072 X * This program is free software; you can redistribute it and/or modify
1073 X * it under the terms of the GNU General Pub 1073 X * it under the terms of the GNU General Public License as published by
1074 X * the Free Software Foundation; either vers 1074 X * the Free Software Foundation; either version 2 of the License, or
1075 X * (at your option) any later version. 1075 X * (at your option) any later version.
1076 X * 1076 X *
1077 X * This program is distributed in the hope t 1077 X * This program is distributed in the hope that it will be useful,
1078 X * but WITHOUT ANY WARRANTY; without even th 1078 X * but WITHOUT ANY WARRANTY; without even the implied warranty of
1079 X * MERCHANTABILITY or FITNESS FOR A PARTICUL 1079 X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
1080 X * GNU General Public License for more detai 1080 X * GNU General Public License for more details.
1081 X * 1081 X *
1082 X * You should have received a copy of the GN 1082 X * You should have received a copy of the GNU General Public License
1083 X * along with this program; if not, write to 1083 X * along with this program; if not, write to the Free Software
1084 X * Foundation, Inc., 675 Mass Ave, Cambridge 1084 X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
1085 X * 1085 X *
1086 X ******************************************* 1086 X ********************************************************************/
1087 X 1087 X
1088 #include <stdio.h> 1088 #include <stdio.h>
1089 #include <stdlib.h> 1089 #include <stdlib.h>
1090 #include <unistd.h> 1090 #include <unistd.h>
1091 #include <fcntl.h> 1091 #include <fcntl.h>
1092 #include <sys/types.h> 1092 #include <sys/types.h>
1093 #include <sys/stat.h> 1093 #include <sys/stat.h>
1094 #include <sys/ioctl.h> 1094 #include <sys/ioctl.h>
1095 #include <sys/soundcard.h> 1095 #include <sys/soundcard.h>
1096 X 1096 X
1097 int main(int argc, char *argv[]) 1097 int main(int argc, char *argv[])
1098 { 1098 {
1099 X int fd; 1099 X int fd;
1100 X 1100 X
1101 X if (argc != 2) { 1101 X if (argc != 2) {
1102 X fprintf(stderr, "usage: msndr 1102 X fprintf(stderr, "usage: msndreset <mixer device>\n");
1103 X exit(1); 1103 X exit(1);
1104 X } 1104 X }
1105 X 1105 X
1106 X if ((fd = open(argv[1], O_RDWR)) < 0) 1106 X if ((fd = open(argv[1], O_RDWR)) < 0) {
1107 X perror(argv[1]); 1107 X perror(argv[1]);
1108 X exit(1); 1108 X exit(1);
1109 X } 1109 X }
1110 X 1110 X
1111 X if (ioctl(fd, SOUND_MIXER_PRIVATE1, 0 1111 X if (ioctl(fd, SOUND_MIXER_PRIVATE1, 0) < 0) {
1112 X fprintf(stderr, "error: msnd 1112 X fprintf(stderr, "error: msnd ioctl reset failed\n");
1113 X perror("ioctl"); 1113 X perror("ioctl");
1114 X close(fd); 1114 X close(fd);
1115 X exit(1); 1115 X exit(1);
1116 X } 1116 X }
1117 X 1117 X
1118 X close(fd); 1118 X close(fd);
1119 X 1119 X
1120 X return 0; 1120 X return 0;
1121 } 1121 }
1122 SHAR_EOF 1122 SHAR_EOF
1123 $shar_touch -am 1204100698 'MultiSound.d/ms 1123 $shar_touch -am 1204100698 'MultiSound.d/msndreset.c' &&
1124 chmod 0664 'MultiSound.d/msndreset.c' || 1124 chmod 0664 'MultiSound.d/msndreset.c' ||
1125 $echo 'restore of' 'MultiSound.d/msndreset. 1125 $echo 'restore of' 'MultiSound.d/msndreset.c' 'failed'
1126 if ( md5sum --help 2>&1 | grep 'sage: md5su 1126 if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
1127 && ( md5sum --version 2>&1 | grep -v 'textu 1127 && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
1128 md5sum -c << SHAR_EOF >/dev/null 2>&1 \ 1128 md5sum -c << SHAR_EOF >/dev/null 2>&1 \
1129 || $echo 'MultiSound.d/msndreset.c:' 'MD5 1129 || $echo 'MultiSound.d/msndreset.c:' 'MD5 check failed'
1130 c52f876521084e8eb25e12e01dcccb8a MultiSound. 1130 c52f876521084e8eb25e12e01dcccb8a MultiSound.d/msndreset.c
1131 SHAR_EOF 1131 SHAR_EOF
1132 else 1132 else
1133 shar_count="`LC_ALL= LC_CTYPE= LANG= wc - 1133 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/msndreset.c'`"
1134 test 1491 -eq "$shar_count" || 1134 test 1491 -eq "$shar_count" ||
1135 $echo 'MultiSound.d/msndreset.c:' 'origin 1135 $echo 'MultiSound.d/msndreset.c:' 'original size' '1491,' 'current size' "$shar_count!"
1136 fi 1136 fi
1137 fi 1137 fi
1138 rm -fr _sh01426 1138 rm -fr _sh01426
1139 exit 0 1139 exit 0
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.