1 # SPDX-License-Identifier: GPL-2.0-only <<
2 # 1 #
3 # Copyright (C) 2004, 2007-2010, 2011-2012 Syn !! 2 # m68k/Makefile
>> 3 #
>> 4 # This file is included by the global makefile so that you can add your own
>> 5 # architecture-specific flags and dependencies. Remember to do have actions
>> 6 # for "archclean" and "archdep" for cleaning up and making dependencies for
>> 7 # this architecture
>> 8 #
>> 9 # This file is subject to the terms and conditions of the GNU General Public
>> 10 # License. See the file "COPYING" in the main directory of this archive
>> 11 # for more details.
>> 12 #
>> 13 # Copyright (C) 1994 by Hamish Macdonald
>> 14 # Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com>
4 # 15 #
5 16
6 KBUILD_DEFCONFIG := haps_hs_smp_defconfig !! 17 KBUILD_DEFCONFIG := multi_defconfig
7 18
8 ifeq ($(CROSS_COMPILE),) !! 19 ifneq ($(SUBARCH),$(ARCH))
9 CROSS_COMPILE := $(call cc-cross-prefix, arc-l !! 20 ifeq ($(CROSS_COMPILE),)
>> 21 CROSS_COMPILE := $(call cc-cross-prefix, \
>> 22 m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
>> 23 endif
10 endif 24 endif
11 25
12 cflags-y += -fno-common -pipe -fno-buil !! 26 #
13 !! 27 # Enable processor type. Ordering of these is important - we want to
14 tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT) := -mc !! 28 # use the minimum processor type of the range we support. The logic
15 tune-mcpu-def-$(CONFIG_ISA_ARCV2) := -mc !! 29 # for 680x0 will only allow use of the -m68060 or -m68040 if no other
16 !! 30 # 680x0 type is specified - and no option is specified for 68030 or
17 ifeq ($(CONFIG_ARC_TUNE_MCPU),) !! 31 # 68020. The other m68k/ColdFire types always specify some type of
18 cflags-y += $(t !! 32 # compiler cpu type flag.
19 else !! 33 #
20 tune-mcpu := $(C !! 34 ifndef CONFIG_M68040
21 ifneq ($(call cc-option,$(tune-mcpu)),) !! 35 cpuflags-$(CONFIG_M68060) := -m68060
22 cflags-y += $(t <<
23 else <<
24 # The flag provided by 'CONFIG_ARC_TUNE_MCPU' <<
25 # (probably the compiler is too old). Use ISA <<
26 $(warning ** WARNING ** CONFIG_ARC_TUNE_MCPU f <<
27 cflags-y += $(t <<
28 endif <<
29 endif 36 endif
30 !! 37 ifndef CONFIG_M68060
31 ifdef CONFIG_ARC_CURR_IN_REG !! 38 cpuflags-$(CONFIG_M68040) := -m68040
32 # For a global register definition, make sure <<
33 # We had a customer reported bug where some co <<
34 # any kernel headers, and missing the global r <<
35 # Can't do unconditionally because of recursiv <<
36 # due to <linux/thread_info.h> <<
37 LINUXINCLUDE += -include $(srctree)/arch/a <<
38 cflags-y += -ffixed-gp <<
39 endif 39 endif
40 !! 40 cpuflags-$(CONFIG_M68030) :=
41 cflags-y += -fs !! 41 cpuflags-$(CONFIG_M68020) :=
42 !! 42 cpuflags-$(CONFIG_M68360) := -m68332
43 cflags-$(CONFIG_ARC_HAS_LLSC) += -ml !! 43 cpuflags-$(CONFIG_M68000) := -m68000
44 cflags-$(CONFIG_ARC_HAS_SWAPE) += -ms !! 44 cpuflags-$(CONFIG_M5441x) := $(call cc-option,-mcpu=54455,-mcfv4e)
45 !! 45 cpuflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200)
46 ifdef CONFIG_ISA_ARCV2 !! 46 cpuflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200)
47 !! 47 cpuflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307)
48 ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS !! 48 cpuflags-$(CONFIG_M537x) := $(call cc-option,-mcpu=537x,-m5307)
49 cflags-y += -mu !! 49 cpuflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200)
>> 50 cpuflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307)
>> 51 cpuflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
>> 52 cpuflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
>> 53 cpuflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
>> 54 cpuflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
>> 55 cpuflags-$(CONFIG_M525x) := $(call cc-option,-mcpu=5253,-m5200)
>> 56 cpuflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
>> 57 cpuflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200)
>> 58 cpuflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200)
>> 59 cpuflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200)
>> 60
>> 61 KBUILD_AFLAGS += $(cpuflags-y)
>> 62 KBUILD_CFLAGS += $(cpuflags-y) -pipe
>> 63 ifdef CONFIG_MMU
>> 64 # without -fno-strength-reduce the 53c7xx.c driver fails ;-(
>> 65 KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2
50 else 66 else
51 cflags-y += -mn !! 67 # we can use a m68k-linux-gcc toolchain with these in place
>> 68 KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
>> 69 KBUILD_CFLAGS += -D__uClinux__
>> 70 KBUILD_AFLAGS += -D__uClinux__
52 endif 71 endif
53 72
54 ifndef CONFIG_ARC_HAS_LL64 !! 73 LDFLAGS := -m m68kelf
55 cflags-y += -mn !! 74 KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
56 endif <<
57 75
58 ifndef CONFIG_ARC_HAS_DIV_REM !! 76 ifdef CONFIG_SUN3
59 cflags-y += -mn !! 77 LDFLAGS_vmlinux = -N
60 endif 78 endif
61 79
62 endif !! 80 CHECKFLAGS += -D__mc68000__
63 <<
64 cfi := $(call as-instr,.cfi_startproc\n.cfi_en <<
65 cflags-$(CONFIG_ARC_DW2_UNWIND) += -fa <<
66 <<
67 # small data is default for elf32 tool-chain. <<
68 # This also allows repurposing GP as scratch r <<
69 disable_small_data := y <<
70 cflags-$(disable_small_data) += -mn <<
71 <<
72 cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb <<
73 ldflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB <<
74 <<
75 LIBGCC = $(shell $(CC) $(cflags-y) --print-li <<
76 <<
77 # Modules with short calls might break for cal <<
78 KBUILD_CFLAGS_MODULE += -mlong-calls -mno-m <<
79 <<
80 # Finally dump eveything into kernel build sys <<
81 KBUILD_CFLAGS += $(cflags-y) <<
82 KBUILD_AFLAGS += $(KBUILD_CFLAGS) <<
83 KBUILD_LDFLAGS += $(ldflags-y) <<
84 <<
85 # w/o this dtb won't embed into kernel binary <<
86 core-y += arch/arc/boot/dts/ <<
87 81
88 core-y += arch/arc/pl <<
89 core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/pl <<
90 core-$(CONFIG_ARC_PLAT_AXS10X) += arch/arc/pl <<
91 core-$(CONFIG_ARC_SOC_HSDK) += arch/arc/pl <<
92 82
93 libs-y += arch/arc/lib/ $(LIBGCC) !! 83 ifdef CONFIG_KGDB
>> 84 # If configured for kgdb support, include debugging infos and keep the
>> 85 # frame pointer
>> 86 KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
>> 87 endif
94 88
95 boot := arch/arc/boot !! 89 #
>> 90 # Select the assembler head startup code. Order is important. The default
>> 91 # head code is first, processor specific selections can override it after.
>> 92 #
>> 93 head-y := arch/m68k/kernel/head.o
>> 94 head-$(CONFIG_SUN3) := arch/m68k/kernel/sun3-head.o
>> 95 head-$(CONFIG_M68360) := arch/m68k/platform/68360/head.o
>> 96 head-$(CONFIG_M68000) := arch/m68k/platform/68000/head.o
>> 97 head-$(CONFIG_COLDFIRE) := arch/m68k/platform/coldfire/head.o
>> 98
>> 99 core-y += arch/m68k/kernel/ arch/m68k/mm/
>> 100 libs-y += arch/m68k/lib/
>> 101
>> 102 core-$(CONFIG_Q40) += arch/m68k/q40/
>> 103 core-$(CONFIG_AMIGA) += arch/m68k/amiga/
>> 104 core-$(CONFIG_ATARI) += arch/m68k/atari/
>> 105 core-$(CONFIG_MAC) += arch/m68k/mac/
>> 106 core-$(CONFIG_HP300) += arch/m68k/hp300/
>> 107 core-$(CONFIG_APOLLO) += arch/m68k/apollo/
>> 108 core-$(CONFIG_MVME147) += arch/m68k/mvme147/
>> 109 core-$(CONFIG_MVME16x) += arch/m68k/mvme16x/
>> 110 core-$(CONFIG_BVME6000) += arch/m68k/bvme6000/
>> 111 core-$(CONFIG_SUN3X) += arch/m68k/sun3x/ arch/m68k/sun3/
>> 112 core-$(CONFIG_SUN3) += arch/m68k/sun3/ arch/m68k/sun3/prom/
>> 113 core-$(CONFIG_NATFEAT) += arch/m68k/emu/
>> 114 core-$(CONFIG_M68040) += arch/m68k/fpsp040/
>> 115 core-$(CONFIG_M68060) += arch/m68k/ifpsp060/
>> 116 core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/
>> 117 core-$(CONFIG_M68360) += arch/m68k/platform/68360/
>> 118 core-$(CONFIG_M68000) += arch/m68k/platform/68000/
>> 119 core-$(CONFIG_COLDFIRE) += arch/m68k/platform/coldfire/
>> 120
>> 121
>> 122 all: zImage
>> 123
>> 124 lilo: vmlinux
>> 125 if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
>> 126 if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
>> 127 cat vmlinux > $(INSTALL_PATH)/vmlinux
>> 128 cp System.map $(INSTALL_PATH)/System.map
>> 129 if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
>> 130
>> 131 zImage compressed: vmlinux.gz
>> 132
>> 133 vmlinux.gz: vmlinux
>> 134
>> 135 ifndef CONFIG_KGDB
>> 136 cp vmlinux vmlinux.tmp
>> 137 $(STRIP) vmlinux.tmp
>> 138 gzip -9c vmlinux.tmp >vmlinux.gz
>> 139 rm vmlinux.tmp
>> 140 else
>> 141 gzip -9c vmlinux >vmlinux.gz
>> 142 endif
96 143
97 boot_targets := uImage.bin uImage.gz uImage.lz !! 144 bzImage: vmlinux.bz2
98 145
99 PHONY += $(boot_targets) !! 146 vmlinux.bz2: vmlinux
100 $(boot_targets): vmlinux <<
101 $(Q)$(MAKE) $(build)=$(boot) $(boot)/$ <<
102 147
103 uimage-default-y := uIm !! 148 ifndef CONFIG_KGDB
104 uimage-default-$(CONFIG_KERNEL_GZIP) := uIm !! 149 cp vmlinux vmlinux.tmp
105 uimage-default-$(CONFIG_KERNEL_LZMA) := uIm !! 150 $(STRIP) vmlinux.tmp
>> 151 bzip2 -1c vmlinux.tmp >vmlinux.bz2
>> 152 rm vmlinux.tmp
>> 153 else
>> 154 bzip2 -1c vmlinux >vmlinux.bz2
>> 155 endif
106 156
107 PHONY += uImage !! 157 archclean:
108 uImage: $(uimage-default-y) !! 158 rm -f vmlinux.gz vmlinux.bz2
109 @ln -sf $< $(boot)/uImage <<
110 @$(kecho) ' Image $(boot)/uImage is r <<
111 159
112 CLEAN_FILES += $(boot)/uImage !! 160 install:
>> 161 sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.