1 # SPDX-License-Identifier: GPL-2.0 1 # SPDX-License-Identifier: GPL-2.0
2 config ARM !! 2 config ALPHA
3 bool 3 bool
4 default y 4 default y
5 select ARCH_32BIT_OFF_T <<
6 select ARCH_CORRECT_STACKTRACE_ON_KRET <<
7 select ARCH_HAS_BINFMT_FLAT <<
8 select ARCH_HAS_CPU_CACHE_ALIASING <<
9 select ARCH_HAS_CPU_FINALIZE_INIT if M <<
10 select ARCH_HAS_CURRENT_STACK_POINTER <<
11 select ARCH_HAS_DEBUG_VIRTUAL if MMU <<
12 select ARCH_HAS_DMA_ALLOC if MMU <<
13 select ARCH_HAS_DMA_OPS <<
14 select ARCH_HAS_DMA_WRITE_COMBINE if ! <<
15 select ARCH_HAS_ELF_RANDOMIZE <<
16 select ARCH_HAS_FORTIFY_SOURCE <<
17 select ARCH_HAS_KEEPINITRD <<
18 select ARCH_HAS_KCOV <<
19 select ARCH_HAS_MEMBARRIER_SYNC_CORE <<
20 select ARCH_HAS_NON_OVERLAPPING_ADDRES <<
21 select ARCH_HAS_PTE_SPECIAL if ARM_LPA <<
22 select ARCH_HAS_SETUP_DMA_OPS <<
23 select ARCH_HAS_SET_MEMORY <<
24 select ARCH_STACKWALK <<
25 select ARCH_HAS_STRICT_KERNEL_RWX if M <<
26 select ARCH_HAS_STRICT_MODULE_RWX if M <<
27 select ARCH_HAS_SYNC_DMA_FOR_DEVICE <<
28 select ARCH_HAS_SYNC_DMA_FOR_CPU <<
29 select ARCH_HAS_TEARDOWN_DMA_OPS if MM <<
30 select ARCH_HAS_TICK_BROADCAST if GENE <<
31 select ARCH_HAVE_NMI_SAFE_CMPXCHG if C <<
32 select ARCH_HAS_GCOV_PROFILE_ALL <<
33 select ARCH_KEEP_MEMBLOCK <<
34 select ARCH_HAS_UBSAN <<
35 select ARCH_MIGHT_HAVE_PC_PARPORT 5 select ARCH_MIGHT_HAVE_PC_PARPORT
36 select ARCH_OPTIONAL_KERNEL_RWX if ARC !! 6 select ARCH_MIGHT_HAVE_PC_SERIO
37 select ARCH_OPTIONAL_KERNEL_RWX_DEFAUL !! 7 select ARCH_NO_PREEMPT
38 select ARCH_NEED_CMPXCHG_1_EMU if CPU_ !! 8 select ARCH_NO_SG_CHAIN
39 select ARCH_SUPPORTS_ATOMIC_RMW <<
40 select ARCH_SUPPORTS_CFI_CLANG <<
41 select ARCH_SUPPORTS_HUGETLBFS if ARM_ <<
42 select ARCH_SUPPORTS_PER_VMA_LOCK <<
43 select ARCH_USE_BUILTIN_BSWAP <<
44 select ARCH_USE_CMPXCHG_LOCKREF 9 select ARCH_USE_CMPXCHG_LOCKREF
45 select ARCH_USE_MEMTEST !! 10 select FORCE_PCI if !ALPHA_JENSEN
46 select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_ !! 11 select PCI_DOMAINS if PCI
47 select ARCH_WANT_GENERAL_HUGETLB !! 12 select PCI_SYSCALL if PCI
48 select ARCH_WANT_IPC_PARSE_VERSION !! 13 select HAVE_AOUT
49 select ARCH_WANT_LD_ORPHAN_WARN !! 14 select HAVE_ASM_MODVERSIONS
50 select BINFMT_FLAT_ARGVP_ENVP_ON_STACK !! 15 select HAVE_IDE
51 select BUILDTIME_TABLE_SORT if MMU !! 16 select HAVE_OPROFILE
52 select COMMON_CLK if !(ARCH_RPC || ARC !! 17 select HAVE_PCSPKR_PLATFORM
53 select CLONE_BACKWARDS !! 18 select HAVE_PERF_EVENTS
54 select CPU_PM if SUSPEND || CPU_IDLE !! 19 select NEED_DMA_MAP_STATE
55 select DCACHE_WORD_ACCESS if HAVE_EFFI !! 20 select NEED_SG_DMA_LENGTH
56 select DMA_DECLARE_COHERENT !! 21 select VIRT_TO_BUS
57 select DMA_GLOBAL_POOL if !MMU <<
58 select DMA_NONCOHERENT_MMAP if MMU <<
59 select EDAC_SUPPORT <<
60 select EDAC_ATOMIC_SCRUB <<
61 select GENERIC_ALLOCATOR <<
62 select GENERIC_ARCH_TOPOLOGY if ARM_CP <<
63 select GENERIC_ATOMIC64 if CPU_V7M || <<
64 select GENERIC_CLOCKEVENTS_BROADCAST i <<
65 select GENERIC_IRQ_IPI if SMP <<
66 select GENERIC_CPU_AUTOPROBE <<
67 select GENERIC_CPU_DEVICES <<
68 select GENERIC_EARLY_IOREMAP <<
69 select GENERIC_IDLE_POLL_SETUP <<
70 select GENERIC_IRQ_MULTI_HANDLER <<
71 select GENERIC_IRQ_PROBE 22 select GENERIC_IRQ_PROBE
>> 23 select GENERIC_PCI_IOMAP if PCI
>> 24 select AUTO_IRQ_AFFINITY if SMP
72 select GENERIC_IRQ_SHOW 25 select GENERIC_IRQ_SHOW
73 select GENERIC_IRQ_SHOW_LEVEL !! 26 select ARCH_WANT_IPC_PARSE_VERSION
74 select GENERIC_LIB_DEVMEM_IS_ALLOWED !! 27 select ARCH_HAVE_NMI_SAFE_CMPXCHG
75 select GENERIC_PCI_IOMAP !! 28 select AUDIT_ARCH
76 select GENERIC_SCHED_CLOCK !! 29 select GENERIC_CLOCKEVENTS
>> 30 select GENERIC_CPU_VULNERABILITIES
77 select GENERIC_SMP_IDLE_THREAD 31 select GENERIC_SMP_IDLE_THREAD
78 select HARDIRQS_SW_RESEND !! 32 select GENERIC_STRNCPY_FROM_USER
79 select HAS_IOPORT !! 33 select GENERIC_STRNLEN_USER
80 select HAVE_ARCH_AUDITSYSCALL if AEABI !! 34 select HAVE_ARCH_AUDITSYSCALL
81 select HAVE_ARCH_BITREVERSE if (CPU_32 <<
82 select HAVE_ARCH_JUMP_LABEL if !XIP_KE <<
83 select HAVE_ARCH_KFENCE if MMU && !XIP <<
84 select HAVE_ARCH_KGDB if !CPU_ENDIAN_B <<
85 select HAVE_ARCH_KASAN if MMU && !XIP_ <<
86 select HAVE_ARCH_KASAN_VMALLOC if HAVE <<
87 select HAVE_ARCH_MMAP_RND_BITS if MMU <<
88 select HAVE_ARCH_PFN_VALID <<
89 select HAVE_ARCH_SECCOMP <<
90 select HAVE_ARCH_SECCOMP_FILTER if AEA <<
91 select HAVE_ARCH_STACKLEAK <<
92 select HAVE_ARCH_THREAD_STRUCT_WHITELI <<
93 select HAVE_ARCH_TRACEHOOK <<
94 select HAVE_ARCH_TRANSPARENT_HUGEPAGE <<
95 select HAVE_ARM_SMCCC if CPU_V7 <<
96 select HAVE_EBPF_JIT if !CPU_ENDIAN_BE <<
97 select HAVE_CONTEXT_TRACKING_USER <<
98 select HAVE_C_RECORDMCOUNT <<
99 select HAVE_BUILDTIME_MCOUNT_SORT <<
100 select HAVE_DEBUG_KMEMLEAK if !XIP_KER <<
101 select HAVE_DMA_CONTIGUOUS if MMU <<
102 select HAVE_DYNAMIC_FTRACE if !XIP_KER <<
103 select HAVE_DYNAMIC_FTRACE_WITH_REGS i <<
104 select HAVE_EFFICIENT_UNALIGNED_ACCESS <<
105 select HAVE_EXIT_THREAD <<
106 select HAVE_GUP_FAST if ARM_LPAE <<
107 select HAVE_FTRACE_MCOUNT_RECORD if !X <<
108 select HAVE_FUNCTION_ERROR_INJECTION <<
109 select HAVE_FUNCTION_GRAPH_TRACER <<
110 select HAVE_FUNCTION_TRACER if !XIP_KE <<
111 select HAVE_GCC_PLUGINS <<
112 select HAVE_HW_BREAKPOINT if PERF_EVEN <<
113 select HAVE_IRQ_TIME_ACCOUNTING <<
114 select HAVE_KERNEL_GZIP <<
115 select HAVE_KERNEL_LZ4 <<
116 select HAVE_KERNEL_LZMA <<
117 select HAVE_KERNEL_LZO <<
118 select HAVE_KERNEL_XZ <<
119 select HAVE_KPROBES if !XIP_KERNEL && <<
120 select HAVE_KRETPROBES if HAVE_KPROBES <<
121 select HAVE_LD_DEAD_CODE_DATA_ELIMINAT <<
122 select HAVE_MOD_ARCH_SPECIFIC 35 select HAVE_MOD_ARCH_SPECIFIC
123 select HAVE_NMI !! 36 select MODULES_USE_ELF_RELA
124 select HAVE_OPTPROBES if !THUMB2_KERNE !! 37 select ODD_RT_SIGACTION
125 select HAVE_PAGE_SIZE_4KB !! 38 select OLD_SIGSUSPEND
126 select HAVE_PCI if MMU !! 39 select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
127 select HAVE_PERF_EVENTS !! 40 select MMU_GATHER_NO_RANGE
128 select HAVE_PERF_REGS !! 41 help
129 select HAVE_PERF_USER_STACK_DUMP !! 42 The Alpha is a 64-bit general-purpose processor designed and
130 select MMU_GATHER_RCU_TABLE_FREE if SM !! 43 marketed by the Digital Equipment Corporation of blessed memory,
131 select HAVE_REGS_AND_STACK_ACCESS_API !! 44 now Hewlett-Packard. The Alpha Linux project has a home page at
132 select HAVE_RSEQ !! 45 <http://www.alphalinux.org/>.
133 select HAVE_STACKPROTECTOR <<
134 select HAVE_SYSCALL_TRACEPOINTS <<
135 select HAVE_UID16 <<
136 select HAVE_VIRT_CPU_ACCOUNTING_GEN <<
137 select HOTPLUG_CORE_SYNC_DEAD if HOTPL <<
138 select IRQ_FORCED_THREADING <<
139 select LOCK_MM_AND_FIND_VMA <<
140 select MODULES_USE_ELF_REL <<
141 select NEED_DMA_MAP_STATE <<
142 select OF_EARLY_FLATTREE if OF <<
143 select OLD_SIGACTION <<
144 select OLD_SIGSUSPEND3 <<
145 select PCI_DOMAINS_GENERIC if PCI <<
146 select PCI_SYSCALL if PCI <<
147 select PERF_USE_VMALLOC <<
148 select RTC_LIB <<
149 select SPARSE_IRQ if !(ARCH_FOOTBRIDGE <<
150 select SYS_SUPPORTS_APM_EMULATION <<
151 select THREAD_INFO_IN_TASK <<
152 select TIMER_OF if OF <<
153 select HAVE_ARCH_VMAP_STACK if MMU && <<
154 select TRACE_IRQFLAGS_SUPPORT if !CPU_ <<
155 select USE_OF if !(ARCH_FOOTBRIDGE || <<
156 # Above selects are sorted alphabetica <<
157 # according to that. Thanks. <<
158 help <<
159 The ARM series is a line of low-powe <<
160 licensed by ARM Ltd and targeted at <<
161 handhelds such as the Compaq IPAQ. <<
162 manufactured, but legacy ARM-based P <<
163 Europe. There is an ARM Linux proje <<
164 <http://www.arm.linux.org.uk/>. <<
165 46
166 config ARM_HAS_GROUP_RELOCS !! 47 config 64BIT
167 def_bool y 48 def_bool y
168 depends on !LD_IS_LLD || LLD_VERSION > <<
169 depends on !COMPILE_TEST <<
170 help <<
171 Whether or not to use R_ARM_ALU_PC_G <<
172 relocations, which have been around <<
173 supported in LLD until version 14. T <<
174 which is usually sufficient, but not <<
175 this feature when doing compile test <<
176 <<
177 config ARM_DMA_USE_IOMMU <<
178 bool <<
179 select NEED_SG_DMA_LENGTH <<
180 <<
181 if ARM_DMA_USE_IOMMU <<
182 <<
183 config ARM_DMA_IOMMU_ALIGNMENT <<
184 int "Maximum PAGE_SIZE order of alignm <<
185 range 4 9 <<
186 default 8 <<
187 help <<
188 DMA mapping framework by default ali <<
189 PAGE_SIZE order which is greater tha <<
190 size. This works well for buffers up <<
191 for larger buffers it just a waste o <<
192 relatively small addressing window ( <<
193 virtual space with just a few alloca <<
194 <<
195 With this parameter you can specify <<
196 DMA IOMMU buffers. Larger buffers wi <<
197 specified order. The order is expres <<
198 by the PAGE_SIZE. <<
199 <<
200 endif <<
201 <<
202 config SYS_SUPPORTS_APM_EMULATION <<
203 bool <<
204 <<
205 config HAVE_TCM <<
206 bool <<
207 select GENERIC_ALLOCATOR <<
208 49
209 config HAVE_PROC_CPU !! 50 config MMU
210 bool <<
211 <<
212 config NO_IOPORT_MAP <<
213 bool <<
214 <<
215 config SBUS <<
216 bool <<
217 <<
218 config STACKTRACE_SUPPORT <<
219 bool <<
220 default y <<
221 <<
222 config LOCKDEP_SUPPORT <<
223 bool 51 bool
224 default y 52 default y
225 53
226 config ARCH_HAS_ILOG2_U32 54 config ARCH_HAS_ILOG2_U32
227 bool 55 bool
>> 56 default n
228 57
229 config ARCH_HAS_ILOG2_U64 58 config ARCH_HAS_ILOG2_U64
230 bool 59 bool
231 !! 60 default n
232 config ARCH_HAS_BANDGAP <<
233 bool <<
234 <<
235 config FIX_EARLYCON_MEM <<
236 def_bool y if MMU <<
237 <<
238 config GENERIC_HWEIGHT <<
239 bool <<
240 default y <<
241 61
242 config GENERIC_CALIBRATE_DELAY 62 config GENERIC_CALIBRATE_DELAY
243 bool 63 bool
244 default y 64 default y
245 65
246 config ARCH_MAY_HAVE_PC_FDC !! 66 config ZONE_DMA
247 bool 67 bool
248 !! 68 default y
249 config ARCH_SUPPORTS_UPROBES <<
250 def_bool y <<
251 69
252 config GENERIC_ISA_DMA 70 config GENERIC_ISA_DMA
253 bool 71 bool
254 <<
255 config FIQ <<
256 bool <<
257 <<
258 config ARCH_MTD_XIP <<
259 bool <<
260 <<
261 config ARM_PATCH_PHYS_VIRT <<
262 bool "Patch physical to virtual transl <<
263 default y 72 default y
264 depends on MMU <<
265 help <<
266 Patch phys-to-virt and virt-to-phys <<
267 boot and module load time according <<
268 kernel in system memory. <<
269 <<
270 This can only be used with non-XIP M <<
271 of physical memory is at a 2 MiB bou <<
272 <<
273 Only disable this option if you know <<
274 this feature (eg, building a kernel <<
275 you need to shrink the kernel to the <<
276 <<
277 config NEED_MACH_IO_H <<
278 bool <<
279 help <<
280 Select this when mach/io.h is requir <<
281 definitions for this platform. The <<
282 be avoided when possible. <<
283 <<
284 config NEED_MACH_MEMORY_H <<
285 bool <<
286 help <<
287 Select this when mach/memory.h is re <<
288 definitions for this platform. The <<
289 be avoided when possible. <<
290 <<
291 config PHYS_OFFSET <<
292 hex "Physical address of main memory" <<
293 depends on !ARM_PATCH_PHYS_VIRT || !AU <<
294 default DRAM_BASE if !MMU <<
295 default 0x00000000 if ARCH_FOOTBRIDGE <<
296 default 0x10000000 if ARCH_OMAP1 || AR <<
297 default 0xa0000000 if ARCH_PXA <<
298 default 0xc0000000 if ARCH_EP93XX || A <<
299 default 0 <<
300 help <<
301 Please provide the physical address <<
302 location of main memory in your syst <<
303 <<
304 config GENERIC_BUG <<
305 def_bool y <<
306 depends on BUG <<
307 73
308 config PGTABLE_LEVELS 74 config PGTABLE_LEVELS
309 int 75 int
310 default 3 if ARM_LPAE !! 76 default 3
311 default 2 <<
312 <<
313 menu "System Type" <<
314 <<
315 config MMU <<
316 bool "MMU-based Paged Memory Managemen <<
317 default y <<
318 help <<
319 Select if you want MMU-based virtual <<
320 support by paged memory management. <<
321 <<
322 config ARM_SINGLE_ARMV7M <<
323 def_bool !MMU <<
324 select ARM_NVIC <<
325 select CPU_V7M <<
326 select NO_IOPORT_MAP <<
327 <<
328 config ARCH_MMAP_RND_BITS_MIN <<
329 default 8 <<
330 <<
331 config ARCH_MMAP_RND_BITS_MAX <<
332 default 14 if PAGE_OFFSET=0x40000000 <<
333 default 15 if PAGE_OFFSET=0x80000000 <<
334 default 16 <<
335 <<
336 config ARCH_MULTIPLATFORM <<
337 bool "Require kernel to be portable to <<
338 depends on MMU && !(ARCH_FOOTBRIDGE || <<
339 default y <<
340 help <<
341 In general, all Arm machines can be <<
342 kernel image, covering either Armv4/ <<
343 <<
344 However, some configuration options <<
345 specific physical addresses or enabl <<
346 break other machines. <<
347 <<
348 Selecting N here allows using those <<
349 DEBUG_UNCOMPRESS, XIP_KERNEL and ZBO <<
350 <<
351 source "arch/arm/Kconfig.platforms" <<
352 <<
353 # <<
354 # This is sorted alphabetically by mach-* path <<
355 # Kconfigs may be included either alphabetical <<
356 # plat- suffix) or along side the correspondin <<
357 # <<
358 source "arch/arm/mach-actions/Kconfig" <<
359 <<
360 source "arch/arm/mach-alpine/Kconfig" <<
361 <<
362 source "arch/arm/mach-artpec/Kconfig" <<
363 <<
364 source "arch/arm/mach-aspeed/Kconfig" <<
365 <<
366 source "arch/arm/mach-at91/Kconfig" <<
367 <<
368 source "arch/arm/mach-axxia/Kconfig" <<
369 <<
370 source "arch/arm/mach-bcm/Kconfig" <<
371 <<
372 source "arch/arm/mach-berlin/Kconfig" <<
373 <<
374 source "arch/arm/mach-clps711x/Kconfig" <<
375 <<
376 source "arch/arm/mach-davinci/Kconfig" <<
377 <<
378 source "arch/arm/mach-digicolor/Kconfig" <<
379 77
380 source "arch/arm/mach-dove/Kconfig" !! 78 config AUDIT_ARCH
381 <<
382 source "arch/arm/mach-ep93xx/Kconfig" <<
383 <<
384 source "arch/arm/mach-exynos/Kconfig" <<
385 <<
386 source "arch/arm/mach-footbridge/Kconfig" <<
387 <<
388 source "arch/arm/mach-gemini/Kconfig" <<
389 <<
390 source "arch/arm/mach-highbank/Kconfig" <<
391 <<
392 source "arch/arm/mach-hisi/Kconfig" <<
393 <<
394 source "arch/arm/mach-hpe/Kconfig" <<
395 <<
396 source "arch/arm/mach-imx/Kconfig" <<
397 <<
398 source "arch/arm/mach-ixp4xx/Kconfig" <<
399 <<
400 source "arch/arm/mach-keystone/Kconfig" <<
401 <<
402 source "arch/arm/mach-lpc32xx/Kconfig" <<
403 <<
404 source "arch/arm/mach-mediatek/Kconfig" <<
405 <<
406 source "arch/arm/mach-meson/Kconfig" <<
407 <<
408 source "arch/arm/mach-milbeaut/Kconfig" <<
409 <<
410 source "arch/arm/mach-mmp/Kconfig" <<
411 <<
412 source "arch/arm/mach-mstar/Kconfig" <<
413 <<
414 source "arch/arm/mach-mv78xx0/Kconfig" <<
415 <<
416 source "arch/arm/mach-mvebu/Kconfig" <<
417 <<
418 source "arch/arm/mach-mxs/Kconfig" <<
419 <<
420 source "arch/arm/mach-nomadik/Kconfig" <<
421 <<
422 source "arch/arm/mach-npcm/Kconfig" <<
423 <<
424 source "arch/arm/mach-omap1/Kconfig" <<
425 <<
426 source "arch/arm/mach-omap2/Kconfig" <<
427 <<
428 source "arch/arm/mach-orion5x/Kconfig" <<
429 <<
430 source "arch/arm/mach-pxa/Kconfig" <<
431 <<
432 source "arch/arm/mach-qcom/Kconfig" <<
433 <<
434 source "arch/arm/mach-realtek/Kconfig" <<
435 <<
436 source "arch/arm/mach-rpc/Kconfig" <<
437 <<
438 source "arch/arm/mach-rockchip/Kconfig" <<
439 <<
440 source "arch/arm/mach-s3c/Kconfig" <<
441 <<
442 source "arch/arm/mach-s5pv210/Kconfig" <<
443 <<
444 source "arch/arm/mach-sa1100/Kconfig" <<
445 <<
446 source "arch/arm/mach-shmobile/Kconfig" <<
447 <<
448 source "arch/arm/mach-socfpga/Kconfig" <<
449 <<
450 source "arch/arm/mach-spear/Kconfig" <<
451 <<
452 source "arch/arm/mach-sti/Kconfig" <<
453 <<
454 source "arch/arm/mach-stm32/Kconfig" <<
455 <<
456 source "arch/arm/mach-sunxi/Kconfig" <<
457 <<
458 source "arch/arm/mach-tegra/Kconfig" <<
459 <<
460 source "arch/arm/mach-ux500/Kconfig" <<
461 <<
462 source "arch/arm/mach-versatile/Kconfig" <<
463 <<
464 source "arch/arm/mach-vt8500/Kconfig" <<
465 <<
466 source "arch/arm/mach-zynq/Kconfig" <<
467 <<
468 # ARMv7-M architecture <<
469 config ARCH_LPC18XX <<
470 bool "NXP LPC18xx/LPC43xx" <<
471 depends on ARM_SINGLE_ARMV7M <<
472 select ARCH_HAS_RESET_CONTROLLER <<
473 select ARM_AMBA <<
474 select CLKSRC_LPC32XX <<
475 select PINCTRL <<
476 help <<
477 Support for NXP's LPC18xx Cortex-M3 <<
478 high performance microcontrollers. <<
479 <<
480 config ARCH_MPS2 <<
481 bool "ARM MPS2 platform" <<
482 depends on ARM_SINGLE_ARMV7M <<
483 select ARM_AMBA <<
484 select CLKSRC_MPS2 <<
485 help <<
486 Support for Cortex-M Prototyping Sys <<
487 with a range of available cores like <<
488 <<
489 Please, note that depends which Appl <<
490 for the platform may vary, so adjust <<
491 <<
492 # Definitions to make life easier <<
493 config ARCH_ACORN <<
494 bool 79 bool
495 80
496 config PLAT_ORION !! 81 menu "System setup"
497 bool <<
498 select CLKSRC_MMIO <<
499 select GENERIC_IRQ_CHIP <<
500 select IRQ_DOMAIN <<
501 <<
502 config PLAT_ORION_LEGACY <<
503 bool <<
504 select PLAT_ORION <<
505 <<
506 config PLAT_VERSATILE <<
507 bool <<
508 <<
509 source "arch/arm/mm/Kconfig" <<
510 <<
511 config IWMMXT <<
512 bool "Enable iWMMXt support" <<
513 depends on CPU_XSCALE || CPU_XSC3 || C <<
514 default y if PXA27x || PXA3xx || ARCH_ <<
515 help <<
516 Enable support for iWMMXt context sw <<
517 running on a CPU that supports it. <<
518 <<
519 if !MMU <<
520 source "arch/arm/Kconfig-nommu" <<
521 endif <<
522 <<
523 config PJ4B_ERRATA_4742 <<
524 bool "PJ4B Errata 4742: IDLE Wake Up C <<
525 depends on CPU_PJ4B && MACH_ARMADA_370 <<
526 default y <<
527 help <<
528 When coming out of either a Wait for <<
529 Event (WFE) IDLE states, a specific <<
530 the retiring WFI/WFE instructions an <<
531 instructions. This sensitivity can <<
532 Workaround: <<
533 The software must insert either a Da <<
534 or Data Memory Barrier (DMB) command <<
535 instruction <<
536 <<
537 config ARM_ERRATA_326103 <<
538 bool "ARM errata: FSR write bit incorr <<
539 depends on CPU_V6 <<
540 help <<
541 Executing a SWP instruction to read- <<
542 of the FSR on the ARM 1136 prior to <<
543 treat the access as a read, preventi <<
544 causing the faulting task to liveloc <<
545 <<
546 config ARM_ERRATA_411920 <<
547 bool "ARM errata: Invalidation of the <<
548 depends on CPU_V6 || CPU_V6K <<
549 help <<
550 Invalidation of the Instruction Cach <<
551 fail. This erratum is present in 113 <<
552 It does not affect the MPCore. This <<
553 recommended workaround. <<
554 <<
555 config ARM_ERRATA_430973 <<
556 bool "ARM errata: Stale prediction on <<
557 depends on CPU_V7 <<
558 help <<
559 This option enables the workaround f <<
560 r1p* erratum. If a code sequence con <<
561 interworking branch is replaced with <<
562 same virtual address, whether due to <<
563 to physical address re-mapping, Cort <<
564 stale interworking branch prediction <<
565 executing the new code sequence in t <<
566 The workaround enables the BTB/BTAC <<
567 and also flushes the branch target c <<
568 Note that setting specific bits in t <<
569 available in non-secure mode. <<
570 <<
571 config ARM_ERRATA_458693 <<
572 bool "ARM errata: Processor deadlock w <<
573 depends on CPU_V7 <<
574 depends on !ARCH_MULTIPLATFORM <<
575 help <<
576 This option enables the workaround f <<
577 erratum. For very specific sequences <<
578 possible for a hazard condition inte <<
579 be incorrectly associated with a dif <<
580 hazard might then cause a processor <<
581 the L1 caching of the NEON accesses <<
582 in the ACTLR register. Note that set <<
583 register may not be available in non <<
584 available on a multiplatform kernel. <<
585 bootloader instead. <<
586 <<
587 config ARM_ERRATA_460075 <<
588 bool "ARM errata: Data written to the <<
589 depends on CPU_V7 <<
590 depends on !ARCH_MULTIPLATFORM <<
591 help <<
592 This option enables the workaround f <<
593 erratum. Any asynchronous access to <<
594 situation in which recent store tran <<
595 and overwritten with stale memory co <<
596 workaround disables the write-alloca <<
597 ACTLR register. Note that setting sp <<
598 may not be available in non-secure m <<
599 a multiplatform kernel. This should <<
600 instead. <<
601 <<
602 config ARM_ERRATA_742230 <<
603 bool "ARM errata: DMB operation may be <<
604 depends on CPU_V7 && SMP <<
605 depends on !ARCH_MULTIPLATFORM <<
606 help <<
607 This option enables the workaround f <<
608 (r1p0..r2p2) erratum. Under rare cir <<
609 between two write operations may not <<
610 ordering of the two writes. This wor <<
611 the diagnostic register of the Corte <<
612 instruction to behave as a DSB, ensu <<
613 the two writes. Note that setting sp <<
614 register may not be available in non <<
615 available on a multiplatform kernel. <<
616 bootloader instead. <<
617 <<
618 config ARM_ERRATA_742231 <<
619 bool "ARM errata: Incorrect hazard han <<
620 depends on CPU_V7 && SMP <<
621 depends on !ARCH_MULTIPLATFORM <<
622 help <<
623 This option enables the workaround f <<
624 (r2p0..r2p2) erratum. Under certain <<
625 Cortex-A9 MPCore micro-architecture, <<
626 accessing some data located in the s <<
627 data due to bad handling of the addr <<
628 replaced from one of the CPUs at the <<
629 accessing it. This workaround sets s <<
630 register of the Cortex-A9 which redu <<
631 capabilities of the processor. Note <<
632 diagnostics register may not be avai <<
633 is not available on a multiplatform <<
634 the bootloader instead. <<
635 82
636 config ARM_ERRATA_643719 !! 83 choice
637 bool "ARM errata: LoUIS bit field in C !! 84 prompt "Alpha system type"
638 depends on CPU_V7 && SMP !! 85 default ALPHA_GENERIC
639 default y !! 86 ---help---
640 help !! 87 This is the system type of your hardware. A "generic" kernel will
641 This option enables the workaround f !! 88 run on any supported Alpha system. However, if you configure a
642 r1p0) erratum. On affected cores the !! 89 kernel for your specific system, it will be faster and smaller.
643 register returns zero when it should !! 90
644 corrects this value, ensuring cache !! 91 To find out what type of Alpha system you have, you may want to
645 it behave as intended and avoiding d !! 92 check out the Linux/Alpha FAQ, accessible on the WWW from
646 !! 93 <http://www.alphalinux.org/>. In summary:
647 config ARM_ERRATA_720789 !! 94
648 bool "ARM errata: TLBIASIDIS and TLBIM !! 95 Alcor/Alpha-XLT AS 600, AS 500, XL-300, XL-366
649 depends on CPU_V7 !! 96 Alpha-XL XL-233, XL-266
650 help !! 97 AlphaBook1 Alpha laptop
651 This option enables the workaround f !! 98 Avanti AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
652 r2p0) erratum. A faulty ASID can be !! 99 Cabriolet AlphaPC64, AlphaPCI64
653 broadcasted CP15 TLB maintenance ope !! 100 DP264 DP264 / DS20 / ES40 / DS10 / DS10L
654 As a consequence of this erratum, so !! 101 EB164 EB164 21164 evaluation board
655 invalidated are not, resulting in an !! 102 EB64+ EB64+ 21064 evaluation board
656 tables. The workaround changes the T !! 103 EB66 EB66 21066 evaluation board
657 entries regardless of the ASID. !! 104 EB66+ EB66+ 21066 evaluation board
658 !! 105 Jensen DECpc 150, DEC 2000 models 300, 500
659 config ARM_ERRATA_743622 !! 106 LX164 AlphaPC164-LX
660 bool "ARM errata: Faulty hazard checki !! 107 Lynx AS 2100A
661 depends on CPU_V7 !! 108 Miata Personal Workstation 433/500/600 a/au
662 depends on !ARCH_MULTIPLATFORM !! 109 Marvel AlphaServer ES47 / ES80 / GS1280
663 help !! 110 Mikasa AS 1000
664 This option enables the workaround f !! 111 Noname AXPpci33, UDB (Multia)
665 (r2p*) erratum. Under very rare cond !! 112 Noritake AS 1000A, AS 600A, AS 800
666 optimisation in the Cortex-A9 Store !! 113 PC164 AlphaPC164
667 corruption. This workaround sets a s !! 114 Rawhide AS 1200, AS 4000, AS 4100
668 register of the Cortex-A9 which disa !! 115 Ruffian RPX164-2, AlphaPC164-UX, AlphaPC164-BX
669 optimisation, preventing the defect !! 116 SX164 AlphaPC164-SX
670 visible impact on the overall perfor !! 117 Sable AS 2000, AS 2100
671 processor. Note that setting specifi !! 118 Shark DS 20L
672 may not be available in non-secure m !! 119 Takara Takara (OEM)
673 multiplatform kernel. This should be !! 120 Titan AlphaServer ES45 / DS25 / DS15
674 !! 121 Wildfire AlphaServer GS 40/80/160/320
675 config ARM_ERRATA_751472 !! 122
676 bool "ARM errata: Interrupted ICIALLUI !! 123 If you don't know what to do, choose "generic".
677 depends on CPU_V7 !! 124
678 depends on !ARCH_MULTIPLATFORM !! 125 config ALPHA_GENERIC
679 help !! 126 bool "Generic"
680 This option enables the workaround f !! 127 depends on TTY
681 to r3p0) erratum. An interrupted ICI !! 128 select HAVE_EISA
682 completion of a following broadcaste !! 129 help
683 operation is received by a CPU befor !! 130 A generic kernel will run on all supported Alpha hardware.
684 potentially leading to corrupted ent !! 131
685 Note that setting specific bits in t !! 132 config ALPHA_ALCOR
686 not be available in non-secure mode !! 133 bool "Alcor/Alpha-XLT"
687 a multiplatform kernel. This should !! 134 select HAVE_EISA
688 instead. !! 135 help
689 !! 136 For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
690 config ARM_ERRATA_754322 !! 137 slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
691 bool "ARM errata: possible faulty MMU !! 138 Address, CIA) - a 383 pin plastic PGA). It provides a DRAM
692 depends on CPU_V7 !! 139 controller (256-bit memory bus) and a PCI interface. It also does
693 help !! 140 all the work required to support an external Bcache and to maintain
694 This option enables the workaround f !! 141 memory coherence when a PCI device DMAs into (or out of) memory.
695 r3p*) erratum. A speculative memory !! 142
696 which starts prior to an ASID switch !! 143 config ALPHA_XL
697 can populate the micro-TLB with a st !! 144 bool "Alpha-XL"
698 the new ASID. This workaround places !! 145 help
699 switching code so that no page table !! 146 XL-233 and XL-266-based Alpha systems.
700 !! 147
701 config ARM_ERRATA_754327 !! 148 config ALPHA_BOOK1
702 bool "ARM errata: no automatic Store B !! 149 bool "AlphaBook1"
703 depends on CPU_V7 && SMP !! 150 help
704 help !! 151 Dec AlphaBook1/Burns Alpha-based laptops.
705 This option enables the workaround f !! 152
706 r2p0) erratum. The Store Buffer does !! 153 config ALPHA_AVANTI_CH
707 mechanism and therefore a livelock m !! 154 bool "Avanti"
708 continuously polls a memory location !! 155
709 This workaround defines cpu_relax() !! 156 config ALPHA_CABRIOLET
710 written polling loops from denying v !! 157 bool "Cabriolet"
711 !! 158 help
712 config ARM_ERRATA_364296 !! 159 Cabriolet AlphaPC64, AlphaPCI64 systems. Derived from EB64+ but now
713 bool "ARM errata: Possible cache data !! 160 baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
714 depends on CPU_V6 !! 161 slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
715 help !! 162 Bcache SIMMs. Requires power supply with 3.3V output.
716 This options enables the workaround !! 163
717 r0p2 erratum (possible cache data co !! 164 config ALPHA_DP264
718 hit-under-miss enabled). It sets the !! 165 bool "DP264"
719 the auxiliary control register and t !! 166 help
720 register, thus disabling hit-under-m !! 167 Various 21264 systems with the tsunami core logic chipset.
721 processor into full low interrupt la !! 168 API Networks: 264DP, UP2000(+), CS20;
722 is not affected. !! 169 Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
723 !! 170
724 config ARM_ERRATA_764369 !! 171 config ALPHA_EB164
725 bool "ARM errata: Data cache line main !! 172 bool "EB164"
726 depends on CPU_V7 && SMP !! 173 help
>> 174 EB164 21164 evaluation board from DEC. Uses 21164 and ALCOR. Has
>> 175 ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
>> 176 shared with an ISA slot) and 2 32-bit PCI slots. Uses plus-in
>> 177 Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
>> 178 MOUSE (PS2 style), RTC/NVRAM. Boot ROM is Flash. PC-AT-sized
>> 179 motherboard. Requires power supply with 3.3V output.
>> 180
>> 181 config ALPHA_EB64P_CH
>> 182 bool "EB64+"
>> 183
>> 184 config ALPHA_EB66
>> 185 bool "EB66"
>> 186 help
>> 187 A Digital DS group board. Uses 21066 or 21066A. I/O sub-system is
>> 188 identical to EB64+. Baby PC-AT size. Runs from standard PC power
>> 189 supply. The EB66 schematic was published as a marketing poster
>> 190 advertising the 21066 as "the first microprocessor in the world with
>> 191 embedded PCI".
>> 192
>> 193 config ALPHA_EB66P
>> 194 bool "EB66+"
>> 195 help
>> 196 Later variant of the EB66 board.
>> 197
>> 198 config ALPHA_EIGER
>> 199 bool "Eiger"
>> 200 help
>> 201 Apparently an obscure OEM single-board computer based on the
>> 202 Typhoon/Tsunami chipset family. Information on it is scanty.
>> 203
>> 204 config ALPHA_JENSEN
>> 205 bool "Jensen"
>> 206 depends on BROKEN
>> 207 select HAVE_EISA
>> 208 help
>> 209 DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
>> 210 of the first-generation Alpha systems. A number of these systems
>> 211 seem to be available on the second- hand market. The Jensen is a
>> 212 floor-standing tower system which originally used a 150MHz 21064 It
>> 213 used programmable logic to interface a 486 EISA I/O bridge to the
>> 214 CPU.
>> 215
>> 216 config ALPHA_LX164
>> 217 bool "LX164"
>> 218 help
>> 219 A technical overview of this board is available at
>> 220 <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
>> 221
>> 222 config ALPHA_LYNX
>> 223 bool "Lynx"
>> 224 select HAVE_EISA
>> 225 help
>> 226 AlphaServer 2100A-based systems.
>> 227
>> 228 config ALPHA_MARVEL
>> 229 bool "Marvel"
>> 230 help
>> 231 AlphaServer ES47 / ES80 / GS1280 based on EV7.
>> 232
>> 233 config ALPHA_MIATA
>> 234 bool "Miata"
>> 235 select HAVE_EISA
>> 236 help
>> 237 The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
>> 238 or 600au).
>> 239
>> 240 config ALPHA_MIKASA
>> 241 bool "Mikasa"
>> 242 help
>> 243 AlphaServer 1000-based Alpha systems.
>> 244
>> 245 config ALPHA_NAUTILUS
>> 246 bool "Nautilus"
>> 247 help
>> 248 Alpha systems based on the AMD 751 & ALI 1543C chipsets.
>> 249
>> 250 config ALPHA_NONAME_CH
>> 251 bool "Noname"
>> 252
>> 253 config ALPHA_NORITAKE
>> 254 bool "Noritake"
>> 255 select HAVE_EISA
727 help 256 help
728 This option enables the workaround f !! 257 AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
729 affecting Cortex-A9 MPCore with two !! 258 systems.
730 current revisions). Under certain ti <<
731 cache line maintenance operation by <<
732 Shareable memory region may fail to <<
733 Point of Coherency or to the Point o <<
734 system. This workaround adds a DSB i <<
735 relevant cache maintenance functions <<
736 in the diagnostic control register o <<
737 259
738 config ARM_ERRATA_764319 !! 260 config ALPHA_PC164
739 bool "ARM errata: Read to DBGPRSR and !! 261 bool "PC164"
740 depends on CPU_V7 <<
741 help <<
742 This option enables the workaround f <<
743 CP14 read accesses to the DBGPRSR an <<
744 unexpected Undefined Instruction exc <<
745 external pin is set to 0, even when <<
746 from a privileged mode. This work ar <<
747 way the kernel does not stop executi <<
748 262
749 config ARM_ERRATA_775420 !! 263 config ALPHA_P2K
750 bool "ARM errata: A data cache maintena !! 264 bool "Platform2000"
751 depends on CPU_V7 <<
752 help <<
753 This option enables the workaround fo <<
754 r2p6,r2p8,r2p10,r3p0) erratum. In cas <<
755 operation aborts with MMU exception, <<
756 to deadlock. This workaround puts DSB <<
757 an abort may occur on cache maintenan <<
758 265
759 config ARM_ERRATA_798181 !! 266 config ALPHA_RAWHIDE
760 bool "ARM errata: TLBI/DSB failure on !! 267 bool "Rawhide"
761 depends on CPU_V7 && SMP !! 268 select HAVE_EISA
762 help 269 help
763 On Cortex-A15 (r0p0..r3p2) the TLBI* !! 270 AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
764 adequately shooting down all use of !! 271 See HOWTO at
765 option enables the Linux kernel work !! 272 <http://www.alphalinux.org/docs/rawhide/4100_install.shtml>.
766 which sends an IPI to the CPUs that <<
767 as the one being invalidated. <<
768 273
769 config ARM_ERRATA_773022 !! 274 config ALPHA_RUFFIAN
770 bool "ARM errata: incorrect instructio !! 275 bool "Ruffian"
771 depends on CPU_V7 <<
772 help 276 help
773 This option enables the workaround f !! 277 Samsung APC164UX. There is a page on known problems and workarounds
774 (up to r0p4) erratum. In certain rar !! 278 at <http://www.alphalinux.org/faq/FAQ-11.html>.
775 loop buffer may deliver incorrect in <<
776 workaround disables the loop buffer <<
777 279
778 config ARM_ERRATA_818325_852422 !! 280 config ALPHA_RX164
779 bool "ARM errata: A12: some seqs of op !! 281 bool "RX164"
780 depends on CPU_V7 <<
781 help <<
782 This option enables the workaround f <<
783 - Cortex-A12 818325: Execution of an <<
784 instruction might deadlock. Fixed <<
785 - Cortex-A12 852422: Execution of a <<
786 lead to either a data corruption o <<
787 any Cortex-A12 cores yet. <<
788 This workaround for all both errata <<
789 Feature Register. This bit disables <<
790 sequence of 2 instructions that use <<
791 282
792 config ARM_ERRATA_821420 !! 283 config ALPHA_SX164
793 bool "ARM errata: A12: sequence of VMO !! 284 bool "SX164"
794 depends on CPU_V7 <<
795 help <<
796 This option enables the workaround f <<
797 (all revs) erratum. In very rare tim <<
798 of VMOV to Core registers instructio <<
799 one is in the shadow of a branch or <<
800 deadlock when the VMOV instructions <<
801 285
802 config ARM_ERRATA_825619 !! 286 config ALPHA_SABLE
803 bool "ARM errata: A12: DMB NSHST/ISHST !! 287 bool "Sable"
804 depends on CPU_V7 !! 288 select HAVE_EISA
805 help 289 help
806 This option enables the workaround f !! 290 Digital AlphaServer 2000 and 2100-based systems.
807 (all revs) erratum. Within rare timi <<
808 DMB NSHST or DMB ISHST instruction f <<
809 and Device/Strongly-Ordered loads an <<
810 291
811 config ARM_ERRATA_857271 !! 292 config ALPHA_SHARK
812 bool "ARM errata: A12: CPU might deadl !! 293 bool "Shark"
813 depends on CPU_V7 <<
814 help <<
815 This option enables the workaround f <<
816 (all revs) erratum. Under very rare <<
817 hang. The workaround is expected to <<
818 294
819 config ARM_ERRATA_852421 !! 295 config ALPHA_TAKARA
820 bool "ARM errata: A17: DMB ST might fa !! 296 bool "Takara"
821 depends on CPU_V7 <<
822 help 297 help
823 This option enables the workaround f !! 298 Alpha 11164-based OEM single-board computer.
824 (r1p0, r1p1, r1p2) erratum. Under ve <<
825 execution of a DMB ST instruction mi <<
826 stores from GroupA and stores from G <<
827 299
828 config ARM_ERRATA_852423 !! 300 config ALPHA_TITAN
829 bool "ARM errata: A17: some seqs of op !! 301 bool "Titan"
830 depends on CPU_V7 <<
831 help 302 help
832 This option enables the workaround f !! 303 AlphaServer ES45/DS25 SMP based on EV68 and Titan chipset.
833 - Cortex-A17 852423: Execution of a <<
834 lead to either a data corruption o <<
835 any Cortex-A17 cores yet. <<
836 This is identical to Cortex-A12 erra <<
837 config option from the A12 erratum d <<
838 for and handled. <<
839 304
840 config ARM_ERRATA_857272 !! 305 config ALPHA_WILDFIRE
841 bool "ARM errata: A17: CPU might deadl !! 306 bool "Wildfire"
842 depends on CPU_V7 <<
843 help 307 help
844 This option enables the workaround f !! 308 AlphaServer GS 40/80/160/320 SMP based on the EV67 core.
845 This erratum is not known to be fixe <<
846 This is identical to Cortex-A12 erra <<
847 config option from the A12 erratum d <<
848 for and handled. <<
849 309
850 endmenu !! 310 endchoice
851 <<
852 source "arch/arm/common/Kconfig" <<
853 <<
854 menu "Bus support" <<
855 311
>> 312 # clear all implied options (don't want default values for those):
>> 313 # Most of these machines have ISA slots; not exactly sure which don't,
>> 314 # and this doesn't activate hordes of code, so do it always.
856 config ISA 315 config ISA
857 bool 316 bool
>> 317 default y
858 help 318 help
859 Find out whether you have ISA slots 319 Find out whether you have ISA slots on your motherboard. ISA is the
860 name of a bus system, i.e. the way t 320 name of a bus system, i.e. the way the CPU talks to the other stuff
861 inside your box. Other bus systems 321 inside your box. Other bus systems are PCI, EISA, MicroChannel
862 (MCA) or VESA. ISA is an older syst 322 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
863 newer boards don't support it. If y 323 newer boards don't support it. If you have ISA, say Y, otherwise N.
864 324
865 # Select ISA DMA interface <<
866 config ISA_DMA_API 325 config ISA_DMA_API
867 bool 326 bool
>> 327 default y
868 328
869 config ARM_ERRATA_814220 !! 329 config ALPHA_NONAME
870 bool "ARM errata: Cache maintenance by <<
871 depends on CPU_V7 <<
872 help <<
873 The v7 ARM states that all cache and <<
874 operations that do not specify an ad <<
875 each other, in program order. <<
876 However, because of this erratum, an <<
877 operation can overtake an L1 set/way <<
878 This ERRATA only affected the Cortex <<
879 r0p4, r0p5. <<
880 <<
881 endmenu <<
882 <<
883 menu "Kernel Features" <<
884 <<
885 config HAVE_SMP <<
886 bool 330 bool
887 help !! 331 depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
888 This option should be selected by ma <<
889 capable CPU. <<
890 <<
891 The only effect of this option is to <<
892 options available to the user for co <<
893 <<
894 config SMP <<
895 bool "Symmetric Multi-Processing" <<
896 depends on CPU_V6K || CPU_V7 <<
897 depends on HAVE_SMP <<
898 depends on MMU || ARM_MPU <<
899 select IRQ_WORK <<
900 help <<
901 This enables support for systems wit <<
902 a system with only one CPU, say N. I <<
903 than one CPU, say Y. <<
904 <<
905 If you say N here, the kernel will r <<
906 machines, but will use only one CPU <<
907 you say Y here, the kernel will run <<
908 uniprocessor machines. On a uniproce <<
909 will run faster if you say N here. <<
910 <<
911 See also <file:Documentation/arch/x8 <<
912 <file:Documentation/admin-guide/lock <<
913 <http://tldp.org/HOWTO/SMP-HOWTO.htm <<
914 <<
915 If you don't know what to do here, s <<
916 <<
917 config SMP_ON_UP <<
918 bool "Allow booting SMP kernel on unip <<
919 depends on SMP && MMU <<
920 default y 332 default y
921 help 333 help
922 SMP kernels contain instructions whi !! 334 The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
923 Enabling this option allows the kern !! 335 UDB). This design was produced by Digital's Technical OEM (TOEM)
924 these instructions safe. Disabling !! 336 group. It uses the 21066 processor running at 166MHz or 233MHz. It
925 savings. !! 337 is a baby-AT size, and runs from a standard PC power supply. It has
926 !! 338 5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
927 If you don't know what to do here, s !! 339 2 versions, with either PS/2 or large DIN connectors for the
928 !! 340 keyboard.
929 <<
930 config CURRENT_POINTER_IN_TPIDRURO <<
931 def_bool y <<
932 depends on CPU_32v6K && !CPU_V6 <<
933 341
934 config IRQSTACKS !! 342 config ALPHA_EV4
935 def_bool y !! 343 bool
936 select HAVE_IRQ_EXIT_ON_IRQ_STACK !! 344 depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
937 select HAVE_SOFTIRQ_ON_OWN_STACK !! 345 default y if !ALPHA_LYNX
938 346
939 config ARM_CPU_TOPOLOGY !! 347 config ALPHA_LCA
940 bool "Support cpu topology definition" !! 348 bool
941 depends on SMP && CPU_V7 !! 349 depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
942 default y 350 default y
943 help <<
944 Support ARM cpu topology definition. <<
945 affinity between processors which is <<
946 topology of an ARM System. <<
947 <<
948 config SCHED_MC <<
949 bool "Multi-core scheduler support" <<
950 depends on ARM_CPU_TOPOLOGY <<
951 help <<
952 Multi-core scheduler support improve <<
953 making when dealing with multi-core <<
954 increased overhead in some places. I <<
955 351
956 config SCHED_SMT !! 352 config ALPHA_APECS
957 bool "SMT scheduler support" !! 353 bool
958 depends on ARM_CPU_TOPOLOGY !! 354 depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
959 help !! 355 default y
960 Improves the CPU scheduler's decisio <<
961 MultiThreading at a cost of slightly <<
962 places. If unsure say N here. <<
963 356
964 config HAVE_ARM_SCU !! 357 config ALPHA_EB64P
965 bool 358 bool
>> 359 depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
>> 360 default y
966 help 361 help
967 This option enables support for the !! 362 Uses 21064 or 21064A and APECs. Has ISA and PCI expansion (3 ISA,
>> 363 2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
>> 364 ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
>> 365 (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
>> 366 SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM. PC-AT size.
>> 367 Runs from standard PC power supply.
968 368
969 config HAVE_ARM_ARCH_TIMER !! 369 config ALPHA_EV5
970 bool "Architected timer support" !! 370 bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
971 depends on CPU_V7 !! 371 default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
972 select ARM_ARCH_TIMER <<
973 help <<
974 This option enables support for the <<
975 372
976 config HAVE_ARM_TWD !! 373 config ALPHA_EV4
977 bool 374 bool
978 help !! 375 default y if ALPHA_LYNX && !ALPHA_EV5
979 This options enables support for the <<
980 376
981 config MCPM !! 377 config ALPHA_CIA
982 bool "Multi-Cluster Power Management" <<
983 depends on CPU_V7 && SMP <<
984 help <<
985 This option provides the common powe <<
986 for (multi-)cluster based systems, s <<
987 systems. <<
988 <<
989 config MCPM_QUAD_CLUSTER <<
990 bool 378 bool
991 depends on MCPM !! 379 depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
992 help !! 380 default y
993 To avoid wasting resources unnecessa <<
994 to 2 clusters by default. <<
995 Platforms with 3 or 4 clusters that <<
996 option to allow the additional clust <<
997 <<
998 config BIG_LITTLE <<
999 bool "big.LITTLE support (Experimental <<
1000 depends on CPU_V7 && SMP <<
1001 select MCPM <<
1002 help <<
1003 This option enables support selecti <<
1004 system architecture. <<
1005 <<
1006 config BL_SWITCHER <<
1007 bool "big.LITTLE switcher support" <<
1008 depends on BIG_LITTLE && MCPM && HOTP <<
1009 select CPU_PM <<
1010 help <<
1011 The big.LITTLE "switcher" provides <<
1012 transparently handle transition bet <<
1013 and a cluster of A7's in a big.LITT <<
1014 <<
1015 config BL_SWITCHER_DUMMY_IF <<
1016 tristate "Simple big.LITTLE switcher <<
1017 depends on BL_SWITCHER && DEBUG_KERNE <<
1018 help <<
1019 This is a simple and dummy char dev <<
1020 the big.LITTLE switcher core code. <<
1021 debugging purposes only. <<
1022 381
1023 choice !! 382 config ALPHA_EV56
1024 prompt "Memory split" !! 383 bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
1025 depends on MMU !! 384 default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
1026 default VMSPLIT_3G <<
1027 help <<
1028 Select the desired split between ke <<
1029 <<
1030 If you are not absolutely sure what <<
1031 option alone! <<
1032 <<
1033 config VMSPLIT_3G <<
1034 bool "3G/1G user/kernel split <<
1035 config VMSPLIT_3G_OPT <<
1036 depends on !ARM_LPAE <<
1037 bool "3G/1G user/kernel split <<
1038 config VMSPLIT_2G <<
1039 bool "2G/2G user/kernel split <<
1040 config VMSPLIT_1G <<
1041 bool "1G/3G user/kernel split <<
1042 endchoice <<
1043 385
1044 config PAGE_OFFSET !! 386 config ALPHA_EV56
1045 hex !! 387 prompt "EV56 CPU (speed >= 333MHz)?"
1046 default PHYS_OFFSET if !MMU !! 388 depends on ALPHA_NORITAKE || ALPHA_PRIMO
1047 default 0x40000000 if VMSPLIT_1G <<
1048 default 0x80000000 if VMSPLIT_2G <<
1049 default 0xB0000000 if VMSPLIT_3G_OPT <<
1050 default 0xC0000000 <<
1051 <<
1052 config KASAN_SHADOW_OFFSET <<
1053 hex <<
1054 depends on KASAN <<
1055 default 0x1f000000 if PAGE_OFFSET=0x4 <<
1056 default 0x5f000000 if PAGE_OFFSET=0x8 <<
1057 default 0x9f000000 if PAGE_OFFSET=0xC <<
1058 default 0x8f000000 if PAGE_OFFSET=0xB <<
1059 default 0xffffffff <<
1060 389
1061 config NR_CPUS !! 390 config ALPHA_EV56
1062 int "Maximum number of CPUs (2-32)" !! 391 prompt "EV56 CPU (speed >= 400MHz)?"
1063 range 2 16 if DEBUG_KMAP_LOCAL !! 392 depends on ALPHA_RAWHIDE
1064 range 2 32 if !DEBUG_KMAP_LOCAL <<
1065 depends on SMP <<
1066 default "4" <<
1067 help <<
1068 The maximum number of CPUs that the <<
1069 Up to 32 CPUs can be supported, or <<
1070 debugging is enabled, which uses ha <<
1071 slots as guard regions. <<
1072 393
1073 config HOTPLUG_CPU !! 394 config ALPHA_PRIMO
1074 bool "Support for hot-pluggable CPUs" !! 395 bool "EV5 CPU daughtercard (model 5/xxx)?"
1075 depends on SMP !! 396 depends on ALPHA_NORITAKE || ALPHA_MIKASA
1076 select GENERIC_IRQ_MIGRATION <<
1077 help 397 help
1078 Say Y here to experiment with turni !! 398 Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
1079 can be controlled through /sys/devi <<
1080 <<
1081 config ARM_PSCI <<
1082 bool "Support for the ARM Power State <<
1083 depends on HAVE_ARM_SMCCC <<
1084 select ARM_PSCI_FW <<
1085 help <<
1086 Say Y here if you want Linux to com <<
1087 implementing the PSCI specification <<
1088 management operations described in <<
1089 0022A ("Power State Coordination In <<
1090 ARM processors"). <<
1091 <<
1092 config HZ_FIXED <<
1093 int <<
1094 default 128 if SOC_AT91RM9200 <<
1095 default 0 <<
1096 <<
1097 choice <<
1098 depends on HZ_FIXED = 0 <<
1099 prompt "Timer frequency" <<
1100 <<
1101 config HZ_100 <<
1102 bool "100 Hz" <<
1103 <<
1104 config HZ_200 <<
1105 bool "200 Hz" <<
1106 <<
1107 config HZ_250 <<
1108 bool "250 Hz" <<
1109 399
1110 config HZ_300 !! 400 config ALPHA_GAMMA
1111 bool "300 Hz" !! 401 bool "EV5 CPU(s) (model 5/xxx)?"
1112 !! 402 depends on ALPHA_SABLE
1113 config HZ_500 <<
1114 bool "500 Hz" <<
1115 <<
1116 config HZ_1000 <<
1117 bool "1000 Hz" <<
1118 <<
1119 endchoice <<
1120 <<
1121 config HZ <<
1122 int <<
1123 default HZ_FIXED if HZ_FIXED != 0 <<
1124 default 100 if HZ_100 <<
1125 default 200 if HZ_200 <<
1126 default 250 if HZ_250 <<
1127 default 300 if HZ_300 <<
1128 default 500 if HZ_500 <<
1129 default 1000 <<
1130 <<
1131 config SCHED_HRTICK <<
1132 def_bool HIGH_RES_TIMERS <<
1133 <<
1134 config THUMB2_KERNEL <<
1135 bool "Compile the kernel in Thumb-2 m <<
1136 depends on (CPU_V7 || CPU_V7M) && !CP <<
1137 default y if CPU_THUMBONLY <<
1138 select ARM_UNWIND <<
1139 help 403 help
1140 By enabling this option, the kernel !! 404 Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
1141 Thumb-2 mode. <<
1142 <<
1143 If unsure, say N. <<
1144 <<
1145 config ARM_PATCH_IDIV <<
1146 bool "Runtime patch udiv/sdiv instruc <<
1147 depends on CPU_32v7 <<
1148 default y <<
1149 help <<
1150 The ARM compiler inserts calls to _ <<
1151 __aeabi_uidiv() when it needs to pe <<
1152 and unsigned integers. Some v7 CPUs <<
1153 and udiv instructions that can be u <<
1154 functions. <<
1155 <<
1156 Enabling this option allows the ker <<
1157 replace the first two instructions <<
1158 with the sdiv or udiv plus "bx lr" <<
1159 it is running on supports them. Typ <<
1160 and less power intensive than runni <<
1161 code to do integer division. <<
1162 <<
1163 config AEABI <<
1164 bool "Use the ARM EABI to compile the <<
1165 !CPU_V7M && !CPU_V6 && !CPU_V <<
1166 default CPU_V7 || CPU_V7M || CPU_V6 | <<
1167 help <<
1168 This option allows for the kernel t <<
1169 ARM ABI (aka EABI). This is only u <<
1170 space environment that is also comp <<
1171 <<
1172 Since there are major incompatibili <<
1173 EABI, especially with regard to str <<
1174 option also changes the kernel sysc <<
1175 disambiguate both ABIs and allow fo <<
1176 (selected with CONFIG_OABI_COMPAT). <<
1177 <<
1178 To use this you need GCC version 4. <<
1179 <<
1180 config OABI_COMPAT <<
1181 bool "Allow old ABI binaries to run w <<
1182 depends on AEABI && !THUMB2_KERNEL <<
1183 help <<
1184 This option preserves the old sysca <<
1185 new (ARM EABI) one. It also provide <<
1186 intercept syscalls that have struct <<
1187 in memory differs between the legac <<
1188 (only for non "thumb" binaries). Th <<
1189 overhead to all syscalls and produc <<
1190 <<
1191 The seccomp filter system will not <<
1192 selected, since there is no way yet <<
1193 between calling conventions during <<
1194 <<
1195 If you know you'll be using only pu <<
1196 can say N here. If this option is n <<
1197 to execute a legacy ABI binary then <<
1198 UNPREDICTABLE (in fact it can be pr <<
1199 at all). If in doubt say N. <<
1200 405
1201 config ARCH_SELECT_MEMORY_MODEL !! 406 config ALPHA_GAMMA
1202 def_bool y !! 407 bool
1203 !! 408 depends on ALPHA_LYNX
1204 config ARCH_FLATMEM_ENABLE !! 409 default y
1205 def_bool !(ARCH_RPC || ARCH_SA1100) <<
1206 410
1207 config ARCH_SPARSEMEM_ENABLE !! 411 config ALPHA_T2
1208 def_bool !ARCH_FOOTBRIDGE !! 412 bool
1209 select SPARSEMEM_STATIC if SPARSEMEM !! 413 depends on ALPHA_SABLE || ALPHA_LYNX
1210 !! 414 default y
1211 config HIGHMEM <<
1212 bool "High Memory Support" <<
1213 depends on MMU <<
1214 select KMAP_LOCAL <<
1215 select KMAP_LOCAL_NON_LINEAR_PTE_ARRA <<
1216 help <<
1217 The address space of ARM processors <<
1218 and it has to accommodate user addr <<
1219 space as well as some memory mapped <<
1220 have a large amount of physical mem <<
1221 memory can be "permanently mapped" <<
1222 memory that is not permanently mapp <<
1223 <<
1224 Depending on the selected kernel/us <<
1225 vmalloc space and actual amount of <<
1226 option which should result in a sli <<
1227 <<
1228 If unsure, say n. <<
1229 <<
1230 config HIGHPTE <<
1231 bool "Allocate 2nd-level pagetables f <<
1232 depends on HIGHMEM <<
1233 default y <<
1234 help <<
1235 The VM uses one page of physical me <<
1236 For systems with a lot of processes <<
1237 precious low memory, eventually lea <<
1238 consumed by page tables. Setting t <<
1239 user-space 2nd level page tables to <<
1240 <<
1241 config ARM_PAN <<
1242 bool "Enable privileged no-access" <<
1243 depends on MMU <<
1244 default y <<
1245 help <<
1246 Increase kernel security by ensurin <<
1247 are unable to access userspace addr <<
1248 use-after-free bugs becoming an exp <<
1249 by ensuring that magic values (such <<
1250 fault when dereferenced. <<
1251 415
1252 The implementation uses CPU domains !! 416 config ALPHA_PYXIS
1253 disabling of TTBR0 page table walks !! 417 bool
>> 418 depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN
>> 419 default y
1254 420
1255 config CPU_SW_DOMAIN_PAN !! 421 config ALPHA_EV6
1256 def_bool y !! 422 bool
1257 depends on ARM_PAN && !ARM_LPAE !! 423 depends on ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER || ALPHA_MARVEL
1258 help !! 424 default y
1259 Enable use of CPU domains to implem <<
1260 425
1261 CPUs with low-vector mappings use a !! 426 config ALPHA_TSUNAMI
1262 Their lower 1MB needs to remain acc !! 427 bool
1263 the remainder of userspace will bec !! 428 depends on ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER
>> 429 default y
1264 430
1265 config CPU_TTBR0_PAN !! 431 config ALPHA_EV67
1266 def_bool y !! 432 bool "EV67 (or later) CPU (speed > 600MHz)?" if ALPHA_DP264 || ALPHA_EIGER
1267 depends on ARM_PAN && ARM_LPAE !! 433 default y if ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
1268 help 434 help
1269 Enable privileged no-access by disa !! 435 Is this a machine based on the EV67 core? If in doubt, select N here
1270 running in kernel mode. !! 436 and the machine will be treated as an EV6.
1271 <<
1272 config HW_PERF_EVENTS <<
1273 def_bool y <<
1274 depends on ARM_PMU <<
1275 437
1276 config ARM_MODULE_PLTS !! 438 config ALPHA_MCPCIA
1277 bool "Use PLTs to allow module memory !! 439 bool
1278 depends on MODULES !! 440 depends on ALPHA_RAWHIDE
1279 select KASAN_VMALLOC if KASAN !! 441 default y
1280 default y <<
1281 help <<
1282 Allocate PLTs when loading modules <<
1283 targets are too far away for their <<
1284 in the instructions themselves can <<
1285 module's PLT. This allows modules t <<
1286 vmalloc area after the dedicated mo <<
1287 exhausted. The modules will use sli <<
1288 rounding up to page size, the actua <<
1289 the same. <<
1290 <<
1291 Disabling this is usually safe for <<
1292 configurations. If unsure, say y. <<
1293 <<
1294 config ARCH_FORCE_MAX_ORDER <<
1295 int "Order of maximal physically cont <<
1296 default "11" if SOC_AM33XX <<
1297 default "8" if SA1111 <<
1298 default "10" <<
1299 help <<
1300 The kernel page allocator limits th <<
1301 contiguous allocations. The limit i <<
1302 defines the maximal power of two of <<
1303 allocated as a single contiguous bl <<
1304 overriding the default setting when <<
1305 large blocks of physically contiguo <<
1306 <<
1307 Don't change if unsure. <<
1308 <<
1309 config ALIGNMENT_TRAP <<
1310 def_bool CPU_CP15_MMU <<
1311 select HAVE_PROC_CPU if PROC_FS <<
1312 help <<
1313 ARM processors cannot fetch/store i <<
1314 naturally aligned on the bus, i.e., <<
1315 address divisible by 4. On 32-bit A <<
1316 fetch/store instructions will be em <<
1317 here, which has a severe performanc <<
1318 correct operation of some network p <<
1319 configuration it is safe to say N, <<
1320 <<
1321 config UACCESS_WITH_MEMCPY <<
1322 bool "Use kernel mem{cpy,set}() for { <<
1323 depends on MMU <<
1324 default y if CPU_FEROCEON <<
1325 help <<
1326 Implement faster copy_to_user and c <<
1327 cores where a 8-word STM instructio <<
1328 memory write throughput than a sequ <<
1329 <<
1330 A possible side effect is a slight <<
1331 between threads sharing the same ad <<
1332 such copy operations with large buf <<
1333 <<
1334 However, if the CPU data cache is u <<
1335 this option is unlikely to provide <<
1336 <<
1337 config PARAVIRT <<
1338 bool "Enable paravirtualization code" <<
1339 help <<
1340 This changes the kernel so it can m <<
1341 under a hypervisor, potentially imp <<
1342 over full virtualization. <<
1343 <<
1344 config PARAVIRT_TIME_ACCOUNTING <<
1345 bool "Paravirtual steal time accounti <<
1346 select PARAVIRT <<
1347 help <<
1348 Select this option to enable fine g <<
1349 accounting. Time spent executing ot <<
1350 the current vCPU is discounted from <<
1351 that, there can be a small performa <<
1352 <<
1353 If in doubt, say N here. <<
1354 <<
1355 config XEN_DOM0 <<
1356 def_bool y <<
1357 depends on XEN <<
1358 <<
1359 config XEN <<
1360 bool "Xen guest support on ARM" <<
1361 depends on ARM && AEABI && OF <<
1362 depends on CPU_V7 && !CPU_V6 <<
1363 depends on !GENERIC_ATOMIC64 <<
1364 depends on MMU <<
1365 select ARCH_DMA_ADDR_T_64BIT <<
1366 select ARM_PSCI <<
1367 select SWIOTLB <<
1368 select SWIOTLB_XEN <<
1369 select PARAVIRT <<
1370 help <<
1371 Say Y if you want to run Linux in a <<
1372 <<
1373 config CC_HAVE_STACKPROTECTOR_TLS <<
1374 def_bool $(cc-option,-mtp=cp15 -mstac <<
1375 <<
1376 config STACKPROTECTOR_PER_TASK <<
1377 bool "Use a unique stack canary value <<
1378 depends on STACKPROTECTOR && CURRENT_ <<
1379 depends on GCC_PLUGINS || CC_HAVE_STA <<
1380 select GCC_PLUGIN_ARM_SSP_PER_TASK if <<
1381 default y <<
1382 help <<
1383 Due to the fact that GCC uses an or <<
1384 which to load the value of the stac <<
1385 change at reboot time on SMP system <<
1386 kernel's address space are forced t <<
1387 the entire duration that the system <<
1388 442
1389 Enable this option to switch to a d !! 443 config ALPHA_POLARIS
1390 different canary value for each tas !! 444 bool
>> 445 depends on ALPHA_RX164
>> 446 default y
1391 447
1392 endmenu !! 448 config ALPHA_IRONGATE
>> 449 bool
>> 450 depends on ALPHA_NAUTILUS
>> 451 default y
1393 452
1394 menu "Boot options" !! 453 config GENERIC_HWEIGHT
>> 454 bool
>> 455 default y if !ALPHA_EV67
1395 456
1396 config USE_OF !! 457 config ALPHA_AVANTI
1397 bool "Flattened Device Tree support" !! 458 bool
1398 select IRQ_DOMAIN !! 459 depends on ALPHA_XL || ALPHA_AVANTI_CH
1399 select OF !! 460 default y
1400 help 461 help
1401 Include support for flattened devic !! 462 Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
>> 463 Alphas. Info at
>> 464 <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
1402 465
1403 config ARCH_WANT_FLAT_DTB_INSTALL !! 466 config ALPHA_BROKEN_IRQ_MASK
1404 def_bool y !! 467 bool
>> 468 depends on ALPHA_GENERIC || ALPHA_PC164
>> 469 default y
1405 470
1406 config ATAGS !! 471 config VGA_HOSE
1407 bool "Support for the traditional ATA !! 472 bool
>> 473 depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
1408 default y 474 default y
1409 help 475 help
1410 This is the traditional way of pass !! 476 Support VGA on an arbitrary hose; needed for several platforms
1411 time. If you are solely relying on !! 477 which always have multiple hoses, and whose consoles support it.
1412 the ARM_ATAG_DTB_COMPAT option) the <<
1413 to remove ATAGS support from your k <<
1414 <<
1415 config DEPRECATED_PARAM_STRUCT <<
1416 bool "Provide old way to pass kernel <<
1417 depends on ATAGS <<
1418 help <<
1419 This was deprecated in 2001 and ann <<
1420 Some old boot loaders still use thi <<
1421 <<
1422 # Compressed boot loader in ROM. Yes, we rea <<
1423 # TEXT and BSS so we preserve their values in <<
1424 config ZBOOT_ROM_TEXT <<
1425 hex "Compressed ROM boot loader base <<
1426 default 0x0 <<
1427 help <<
1428 The physical address at which the R <<
1429 placed in the target. Platforms wh <<
1430 ROM-able zImage formats normally se <<
1431 value in their defconfig file. <<
1432 <<
1433 If ZBOOT_ROM is not enabled, this h <<
1434 <<
1435 config ZBOOT_ROM_BSS <<
1436 hex "Compressed ROM boot loader BSS a <<
1437 default 0x0 <<
1438 help <<
1439 The base address of an area of read <<
1440 for the ROM-able zImage which must <<
1441 decompressor is running. It must be <<
1442 entire decompressed kernel plus an <<
1443 Platforms which normally make use o <<
1444 normally set this to a suitable val <<
1445 <<
1446 If ZBOOT_ROM is not enabled, this h <<
1447 <<
1448 config ZBOOT_ROM <<
1449 bool "Compressed boot loader in ROM/f <<
1450 depends on ZBOOT_ROM_TEXT != ZBOOT_RO <<
1451 depends on !ARM_APPENDED_DTB && !XIP_ <<
1452 help <<
1453 Say Y here if you intend to execute <<
1454 (zImage) directly from ROM or flash <<
1455 <<
1456 config ARM_APPENDED_DTB <<
1457 bool "Use appended device tree blob t <<
1458 depends on OF <<
1459 help <<
1460 With this option, the boot code wil <<
1461 (DTB) appended to zImage <<
1462 (e.g. cat zImage <filename>.dtb > z <<
1463 <<
1464 This is meant as a backward compati <<
1465 systems with a bootloader that can' <<
1466 the documented boot protocol using <<
1467 <<
1468 Beware that there is very little in <<
1469 this option being confused by lefto <<
1470 look like a DTB header after a rebo <<
1471 to zImage. Do not leave this optio <<
1472 if you don't intend to always appen <<
1473 location into r2 of a bootloader pr <<
1474 to this option. <<
1475 <<
1476 config ARM_ATAG_DTB_COMPAT <<
1477 bool "Supplement the appended DTB wit <<
1478 depends on ARM_APPENDED_DTB <<
1479 help <<
1480 Some old bootloaders can't be updat <<
1481 they provide ATAGs with memory conf <<
1482 the kernel cmdline string, etc. Su <<
1483 provided by the bootloader and can' <<
1484 DTB. To allow a device tree enable <<
1485 bootloaders, this option allows zIm <<
1486 from the ATAG list and store it at <<
1487 478
1488 choice <<
1489 prompt "Kernel command line type" <<
1490 depends on ARM_ATAG_DTB_COMPAT <<
1491 default ARM_ATAG_DTB_COMPAT_CMDLINE_F <<
1492 <<
1493 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTL <<
1494 bool "Use bootloader kernel arguments <<
1495 help <<
1496 Uses the command-line options passe <<
1497 the device tree bootargs property. <<
1498 any, the device tree bootargs prope <<
1499 479
1500 config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND !! 480 config ALPHA_QEMU
1501 bool "Extend with bootloader kernel a !! 481 bool "Run under QEMU emulation"
1502 help !! 482 depends on !ALPHA_GENERIC
1503 The command-line arguments provided !! 483 ---help---
1504 appended to the the device tree boo !! 484 Assume the presence of special features supported by QEMU PALcode
>> 485 that reduce the overhead of system emulation.
1505 486
1506 endchoice !! 487 Generic kernels will auto-detect QEMU. But when building a
>> 488 system-specific kernel, the assumption is that we want to
>> 489 eliminate as many runtime tests as possible.
1507 490
1508 config CMDLINE !! 491 If unsure, say N.
1509 string "Default kernel command string <<
1510 default "" <<
1511 help <<
1512 On some architectures (e.g. CATS), <<
1513 for the boot loader to pass argumen <<
1514 architectures, you should supply so <<
1515 time by entering them here. As a mi <<
1516 memory size and the root device (e. <<
1517 492
1518 choice <<
1519 prompt "Kernel command line type" <<
1520 depends on CMDLINE != "" <<
1521 default CMDLINE_FROM_BOOTLOADER <<
1522 <<
1523 config CMDLINE_FROM_BOOTLOADER <<
1524 bool "Use bootloader kernel arguments <<
1525 help <<
1526 Uses the command-line options passe <<
1527 the boot loader doesn't provide any <<
1528 string provided in CMDLINE will be <<
1529 <<
1530 config CMDLINE_EXTEND <<
1531 bool "Extend bootloader kernel argume <<
1532 help <<
1533 The command-line arguments provided <<
1534 appended to the default kernel comm <<
1535 <<
1536 config CMDLINE_FORCE <<
1537 bool "Always use the default kernel c <<
1538 help <<
1539 Always use the default kernel comma <<
1540 loader passes other arguments to th <<
1541 This is useful if you cannot or don <<
1542 command-line options your boot load <<
1543 endchoice <<
1544 493
1545 config XIP_KERNEL !! 494 config ALPHA_SRM
1546 bool "Kernel Execute-In-Place from RO !! 495 bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
1547 depends on !ARM_LPAE && !ARCH_MULTIPL !! 496 depends on TTY
1548 depends on !ARM_PATCH_IDIV && !ARM_PA !! 497 default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
1549 help !! 498 ---help---
1550 Execute-In-Place allows the kernel !! 499 There are two different types of booting firmware on Alphas: SRM,
1551 directly addressable by the CPU, su !! 500 which is command line driven, and ARC, which uses menus and arrow
1552 space since the text section of the !! 501 keys. Details about the Linux/Alpha booting process are contained in
1553 to RAM. Read-write sections, such !! 502 the Linux/Alpha FAQ, accessible on the WWW from
1554 are still copied to RAM. The XIP k !! 503 <http://www.alphalinux.org/>.
1555 it has to run directly from flash, !! 504
1556 store it. The flash address used t !! 505 The usual way to load Linux on an Alpha machine is to use MILO
1557 and for storing it, is configuratio !! 506 (a bootloader that lets you pass command line parameters to the
1558 say Y here, you must know the prope !! 507 kernel just like lilo does for the x86 architecture) which can be
1559 store the kernel image depending on !! 508 loaded either from ARC or can be installed directly as a permanent
1560 !! 509 firmware replacement from floppy (which requires changing a certain
1561 Also note that the make target beco !! 510 jumper on the motherboard). If you want to do either of these, say N
1562 "make zImage" or "make Image". The !! 511 here. If MILO doesn't work on your system (true for Jensen
1563 ROM memory will be arch/arm/boot/xi !! 512 motherboards), you can bypass it altogether and boot Linux directly
>> 513 from an SRM console; say Y here in order to do that. Note that you
>> 514 won't be able to boot from an IDE disk using SRM.
1564 515
1565 If unsure, say N. 516 If unsure, say N.
1566 517
1567 config XIP_PHYS_ADDR !! 518 config ARCH_MAY_HAVE_PC_FDC
1568 hex "XIP Kernel Physical Location" <<
1569 depends on XIP_KERNEL <<
1570 default "0x00080000" <<
1571 help <<
1572 This is the physical address in you <<
1573 be linked for and stored to. This <<
1574 own flash usage. <<
1575 <<
1576 config XIP_DEFLATED_DATA <<
1577 bool "Store kernel .data section comp <<
1578 depends on XIP_KERNEL <<
1579 select ZLIB_INFLATE <<
1580 help <<
1581 Before the kernel is actually execu <<
1582 copied to RAM from ROM. This option <<
1583 in compressed form and decompressed <<
1584 copied, saving some precious ROM sp <<
1585 slightly longer boot delay. <<
1586 <<
1587 config ARCH_SUPPORTS_KEXEC <<
1588 def_bool (!SMP || PM_SLEEP_SMP) && MM <<
1589 <<
1590 config ATAGS_PROC <<
1591 bool "Export atags in procfs" <<
1592 depends on ATAGS && KEXEC <<
1593 default y <<
1594 help <<
1595 Should the atags used to boot the k <<
1596 file in procfs. Useful with kexec. <<
1597 <<
1598 config ARCH_SUPPORTS_CRASH_DUMP <<
1599 def_bool y 519 def_bool y
1600 520
1601 config AUTO_ZRELADDR !! 521 config SMP
1602 bool "Auto calculation of the decompr !! 522 bool "Symmetric multi-processing support"
1603 default !(ARCH_FOOTBRIDGE || ARCH_RPC !! 523 depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
1604 help !! 524 ---help---
1605 ZRELADDR is the physical address wh !! 525 This enables support for systems with more than one CPU. If you have
1606 image will be placed. If AUTO_ZRELA !! 526 a system with only one CPU, say N. If you have a system with more
1607 will be determined at run-time, eit !! 527 than one CPU, say Y.
1608 with 0xf8000000, or, if invalid, fr <<
1609 This assumes the zImage being place <<
1610 start of memory. <<
1611 <<
1612 config EFI_STUB <<
1613 bool <<
1614 <<
1615 config EFI <<
1616 bool "UEFI runtime support" <<
1617 depends on OF && !CPU_BIG_ENDIAN && M <<
1618 select UCS2_STRING <<
1619 select EFI_PARAMS_FROM_FDT <<
1620 select EFI_STUB <<
1621 select EFI_GENERIC_STUB <<
1622 select EFI_RUNTIME_WRAPPERS <<
1623 help <<
1624 This option provides support for ru <<
1625 by UEFI firmware (such as non-volat <<
1626 clock, and platform reset). A UEFI <<
1627 allow the kernel to be booted as an <<
1628 is only useful for kernels that may <<
1629 UEFI firmware. <<
1630 <<
1631 config DMI <<
1632 bool "Enable support for SMBIOS (DMI) <<
1633 depends on EFI <<
1634 default y <<
1635 help <<
1636 This enables SMBIOS/DMI feature for <<
1637 <<
1638 This option is only useful on syste <<
1639 However, even with this option, the <<
1640 continue to boot on existing non-UE <<
1641 <<
1642 NOTE: This does *NOT* enable or enc <<
1643 i.e., the the practice of identifyi <<
1644 decide whether certain workarounds <<
1645 firmware need to be enabled. This w <<
1646 to be enabled much earlier than we <<
1647 <<
1648 endmenu <<
1649 <<
1650 menu "CPU Power Management" <<
1651 <<
1652 source "drivers/cpufreq/Kconfig" <<
1653 <<
1654 source "drivers/cpuidle/Kconfig" <<
1655 528
1656 endmenu !! 529 If you say N here, the kernel will run on uni- and multiprocessor
>> 530 machines, but will use only one CPU of a multiprocessor machine. If
>> 531 you say Y here, the kernel will run on many, but not all,
>> 532 uniprocessor machines. On a uniprocessor machine, the kernel
>> 533 will run faster if you say N here.
1657 534
1658 menu "Floating point emulation" !! 535 See also the SMP-HOWTO available at
>> 536 <http://www.tldp.org/docs.html#howto>.
1659 537
1660 comment "At least one emulation must be selec !! 538 If you don't know what to do here, say N.
1661 539
1662 config FPE_NWFPE !! 540 config NR_CPUS
1663 bool "NWFPE math emulation" !! 541 int "Maximum number of CPUs (2-32)"
1664 depends on (!AEABI || OABI_COMPAT) && !! 542 range 2 32
>> 543 depends on SMP
>> 544 default "32" if ALPHA_GENERIC || ALPHA_MARVEL
>> 545 default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
1665 help 546 help
1666 Say Y to include the NWFPE floating !! 547 MARVEL support can handle a maximum of 32 CPUs, all the others
1667 This is necessary to run most binar !! 548 with working support have a maximum of 4 CPUs.
1668 support floating point hardware so <<
1669 your machine has an FPA or floating <<
1670 <<
1671 You may say N here if you are going <<
1672 early in the bootup. <<
1673 549
1674 config FPE_NWFPE_XP !! 550 config ARCH_DISCONTIGMEM_ENABLE
1675 bool "Support extended precision" !! 551 bool "Discontiguous Memory Support"
1676 depends on FPE_NWFPE <<
1677 help 552 help
1678 Say Y to include 80-bit support in !! 553 Say Y to support efficient handling of discontiguous physical memory,
1679 emulator. Otherwise, only 32 and 6 !! 554 for architectures which are either NUMA (Non-Uniform Memory Access)
1680 Note that gcc does not generate 80- !! 555 or have huge holes in the physical address space for other reasons.
1681 so in most cases this option only e !! 556 See <file:Documentation/vm/numa.rst> for more.
1682 floating point emulator without any !! 557
1683 !! 558 config NUMA
1684 You almost surely want to say N her !! 559 bool "NUMA Support (EXPERIMENTAL)"
>> 560 depends on DISCONTIGMEM && BROKEN
>> 561 help
>> 562 Say Y to compile the kernel to support NUMA (Non-Uniform Memory
>> 563 Access). This option is for configuring high-end multiprocessor
>> 564 server machines. If in doubt, say N.
>> 565
>> 566 config ALPHA_WTINT
>> 567 bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
>> 568 default y if ALPHA_QEMU
>> 569 default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
>> 570 default n if !ALPHA_SRM && !ALPHA_GENERIC
>> 571 default y if SMP
>> 572 ---help---
>> 573 The Wait for Interrupt (WTINT) PALcall attempts to place the CPU
>> 574 to sleep until the next interrupt. This may reduce the power
>> 575 consumed, and the heat produced by the computer. However, it has
>> 576 the side effect of making the cycle counter unreliable as a timing
>> 577 device across the sleep.
1685 578
1686 config FPE_FASTFPE !! 579 For emulation under QEMU, definitely say Y here, as we have other
1687 bool "FastFPE math emulation (EXPERIM !! 580 mechanisms for measuring time than the cycle counter.
1688 depends on (!AEABI || OABI_COMPAT) && <<
1689 help <<
1690 Say Y here to include the FAST floa <<
1691 This is an experimental much faster <<
1692 precision for the mantissa. It doe <<
1693 It is very simple, and approximatel <<
1694 581
1695 It should be sufficient for most pr !! 582 For EV4 (but not LCA), EV5 and EV56 systems, or for systems running
1696 for scientific calculations, but yo !! 583 MILO, sleep mode is not supported so you might as well say N here.
1697 If you do not feel you need a faste <<
1698 choose NWFPE. <<
1699 584
1700 config VFP !! 585 For SMP systems we cannot use the cycle counter for timing anyway,
1701 bool "VFP-format floating point maths !! 586 so you might as well say Y here.
1702 depends on CPU_V6 || CPU_V6K || CPU_A <<
1703 help <<
1704 Say Y to include VFP support code i <<
1705 if your hardware includes a VFP uni <<
1706 587
1707 Please see <file:Documentation/arch !! 588 If unsure, say N.
1708 release notes and additional status <<
1709 589
1710 Say N if your target does not have !! 590 config NODES_SHIFT
>> 591 int
>> 592 default "7"
>> 593 depends on NEED_MULTIPLE_NODES
1711 594
1712 config VFPv3 !! 595 # LARGE_VMALLOC is racy, if you *really* need it then fix it first
>> 596 config ALPHA_LARGE_VMALLOC
1713 bool 597 bool
1714 depends on VFP !! 598 ---help---
1715 default y if CPU_V7 !! 599 Process creation and other aspects of virtual memory management can
>> 600 be streamlined if we restrict the kernel to one PGD for all vmalloc
>> 601 allocations. This equates to about 8GB.
>> 602
>> 603 Under normal circumstances, this is so far and above what is needed
>> 604 as to be laughable. However, there are certain applications (such
>> 605 as benchmark-grade in-kernel web serving) that can make use of as
>> 606 much vmalloc space as is available.
>> 607
>> 608 Say N unless you know you need gobs and gobs of vmalloc space.
>> 609
>> 610 config VERBOSE_MCHECK
>> 611 bool "Verbose Machine Checks"
>> 612
>> 613 config VERBOSE_MCHECK_ON
>> 614 int "Verbose Printing Mode (0=off, 1=on, 2=all)"
>> 615 depends on VERBOSE_MCHECK
>> 616 default 1
>> 617 ---help---
>> 618 This option allows the default printing mode to be set, and then
>> 619 possibly overridden by a boot command argument.
>> 620
>> 621 For example, if one wanted the option of printing verbose
>> 622 machine checks, but wanted the default to be as if verbose
>> 623 machine check printing was turned off, then one would choose
>> 624 the printing mode to be 0. Then, upon reboot, one could add
>> 625 the boot command line "verbose_mcheck=1" to get the normal
>> 626 verbose machine check printing, or "verbose_mcheck=2" to get
>> 627 the maximum information available.
1716 628
1717 config NEON !! 629 Take the default (1) unless you want more control or more info.
1718 bool "Advanced SIMD (NEON) Extension <<
1719 depends on VFPv3 && CPU_V7 <<
1720 help <<
1721 Say Y to include support code for N <<
1722 Extension. <<
1723 630
1724 config KERNEL_MODE_NEON !! 631 choice
1725 bool "Support for NEON in kernel mode !! 632 prompt "Timer interrupt frequency (HZ)?"
1726 depends on NEON && AEABI !! 633 default HZ_128 if ALPHA_QEMU
1727 help !! 634 default HZ_1200 if ALPHA_RAWHIDE
1728 Say Y to include support for NEON i !! 635 default HZ_1024
1729 !! 636 ---help---
1730 endmenu !! 637 The frequency at which timer interrupts occur. A high frequency
1731 !! 638 minimizes latency, whereas a low frequency minimizes overhead of
1732 menu "Power management options" !! 639 process accounting. The later effect is especially significant
1733 !! 640 when being run under QEMU.
1734 source "kernel/power/Kconfig" !! 641
1735 !! 642 Note that some Alpha hardware cannot change the interrupt frequency
1736 config ARCH_SUSPEND_POSSIBLE !! 643 of the timer. If unsure, say 1024 (or 1200 for Rawhide).
1737 depends on CPU_ARM920T || CPU_ARM926T !! 644
1738 CPU_V6 || CPU_V6K || CPU_V7 | !! 645 config HZ_32
1739 def_bool y !! 646 bool "32 Hz"
>> 647 config HZ_64
>> 648 bool "64 Hz"
>> 649 config HZ_128
>> 650 bool "128 Hz"
>> 651 config HZ_256
>> 652 bool "256 Hz"
>> 653 config HZ_1024
>> 654 bool "1024 Hz"
>> 655 config HZ_1200
>> 656 bool "1200 Hz"
>> 657 endchoice
1740 658
1741 config ARM_CPU_SUSPEND !! 659 config HZ
1742 def_bool PM_SLEEP || BL_SWITCHER || A !! 660 int
1743 depends on ARCH_SUSPEND_POSSIBLE !! 661 default 32 if HZ_32
>> 662 default 64 if HZ_64
>> 663 default 128 if HZ_128
>> 664 default 256 if HZ_256
>> 665 default 1200 if HZ_1200
>> 666 default 1024
>> 667
>> 668 config SRM_ENV
>> 669 tristate "SRM environment through procfs"
>> 670 depends on PROC_FS
>> 671 ---help---
>> 672 If you enable this option, a subdirectory inside /proc called
>> 673 /proc/srm_environment will give you access to the all important
>> 674 SRM environment variables (those which have a name) and also
>> 675 to all others (by their internal number).
>> 676
>> 677 SRM is something like a BIOS for Alpha machines. There are some
>> 678 other such BIOSes, like AlphaBIOS, which this driver cannot
>> 679 support (hey, that's not SRM!).
>> 680
>> 681 Despite the fact that this driver doesn't work on all Alphas (but
>> 682 only on those which have SRM as their firmware), it's save to
>> 683 build it even if your particular machine doesn't know about SRM
>> 684 (or if you intend to compile a generic kernel). It will simply
>> 685 not create those subdirectory in /proc (and give you some warning,
>> 686 of course).
1744 687
1745 config ARCH_HIBERNATION_POSSIBLE !! 688 This driver is also available as a module and will be called
1746 bool !! 689 srm_env then.
1747 depends on MMU <<
1748 default y if ARCH_SUSPEND_POSSIBLE <<
1749 690
1750 endmenu 691 endmenu
1751 692
1752 source "arch/arm/Kconfig.assembler" !! 693 # DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
>> 694 # but we also need it if VGA_HOSE is set
>> 695 config DUMMY_CONSOLE
>> 696 bool
>> 697 depends on VGA_HOSE
>> 698 default y
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.