1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2014, 2015 FUKAUMI Naoki <naob
4 */
5
6 /dts-v1/;
7 #include <dt-bindings/input/input.h>
8 #include "rk3066a.dtsi"
9
10 / {
11 model = "Rayeager PX2";
12 compatible = "chipspark,rayeager-px2",
13
14 aliases {
15 mmc0 = &mmc0;
16 mmc1 = &mmc1;
17 mmc2 = &emmc;
18 };
19
20 memory@60000000 {
21 device_type = "memory";
22 reg = <0x60000000 0x40000000>;
23 };
24
25 ir: ir-receiver {
26 compatible = "gpio-ir-receiver
27 gpios = <&gpio6 RK_PA1 GPIO_AC
28 pinctrl-names = "default";
29 pinctrl-0 = <&ir_int>;
30 };
31
32 keys: gpio-keys {
33 compatible = "gpio-keys";
34
35 key-power {
36 wakeup-source;
37 gpios = <&gpio6 RK_PA2
38 label = "GPIO Power";
39 linux,code = <KEY_POWE
40 pinctrl-names = "defau
41 pinctrl-0 = <&pwr_key>
42 };
43 };
44
45 vdd_log: vdd-log {
46 compatible = "pwm-regulator";
47 pwms = <&pwm3 0 1000>;
48 regulator-name = "vdd_log";
49 regulator-min-microvolt = <120
50 regulator-max-microvolt = <120
51 regulator-always-on;
52 voltage-table = <1000000 100>,
53 <1200000 42>;
54 status = "okay";
55 };
56
57 vsys: vsys-regulator {
58 compatible = "regulator-fixed"
59 regulator-name = "vsys";
60 regulator-min-microvolt = <500
61 regulator-max-microvolt = <500
62 regulator-always-on;
63 regulator-boot-on;
64 };
65
66 /* input for 5V_STDBY is VSYS or DC5V,
67 vcc_stdby: stdby-regulator {
68 compatible = "regulator-fixed"
69 regulator-name = "5v_stdby";
70 regulator-min-microvolt = <500
71 regulator-max-microvolt = <500
72 regulator-always-on;
73 regulator-boot-on;
74 };
75
76 vcc_emmc: emmc-regulator {
77 compatible = "regulator-fixed"
78 regulator-name = "emmc_vccq";
79 regulator-min-microvolt = <300
80 regulator-max-microvolt = <300
81 vin-supply = <&vsys>;
82 };
83
84 vcc_sata: sata-regulator {
85 compatible = "regulator-fixed"
86 enable-active-high;
87 gpio = <&gpio4 RK_PC6 GPIO_ACT
88 pinctrl-names = "default";
89 pinctrl-0 = <&sata_pwr>;
90 regulator-name = "usb_5v";
91 regulator-min-microvolt = <500
92 regulator-max-microvolt = <500
93 regulator-always-on;
94 vin-supply = <&vcc_stdby>;
95 };
96
97 vcc_sd: sdmmc-regulator {
98 compatible = "regulator-fixed"
99 gpio = <&gpio3 RK_PA7 GPIO_ACT
100 pinctrl-names = "default";
101 pinctrl-0 = <&sdmmc_pwr>;
102 regulator-name = "vcc_sd";
103 regulator-min-microvolt = <330
104 regulator-max-microvolt = <330
105 startup-delay-us = <100000>;
106 vin-supply = <&vcc_io>;
107 };
108
109 vcc_host: usb-host-regulator {
110 compatible = "regulator-fixed"
111 enable-active-high;
112 gpio = <&gpio0 RK_PA6 GPIO_ACT
113 pinctrl-names = "default";
114 pinctrl-0 = <&host_drv>;
115 regulator-name = "host-pwr";
116 regulator-min-microvolt = <500
117 regulator-max-microvolt = <500
118 regulator-always-on;
119 vin-supply = <&vcc_stdby>;
120 };
121
122 vcc_otg: usb-otg-regulator {
123 compatible = "regulator-fixed"
124 enable-active-high;
125 gpio = <&gpio0 RK_PA5 GPIO_ACT
126 pinctrl-names = "default";
127 pinctrl-0 = <&otg_drv>;
128 regulator-name = "vcc_otg";
129 regulator-min-microvolt = <500
130 regulator-max-microvolt = <500
131 regulator-always-on;
132 vin-supply = <&vcc_stdby>;
133 };
134 };
135
136 &cpu0 {
137 cpu-supply = <&vdd_arm>;
138 };
139
140 &cpu1 {
141 cpu-supply = <&vdd_arm>;
142 };
143
144 &emac {
145 phy = <&phy0>;
146 phy-supply = <&vcc_rmii>;
147 pinctrl-names = "default";
148 pinctrl-0 = <&emac_xfer>, <&emac_mdio>
149 status = "okay";
150
151 mdio {
152 #address-cells = <1>;
153 #size-cells = <0>;
154
155 phy0: ethernet-phy@0 {
156 reg = <0>;
157 reset-gpios = <&gpio1
158 };
159 };
160 };
161
162 &emmc {
163 bus-width = <8>;
164 cap-mmc-highspeed;
165 non-removable;
166 pinctrl-names = "default";
167 pinctrl-0 = <&emmc_clk>, <&emmc_cmd>,
168 vmmc-supply = <&vcc_emmc>;
169 vqmmc-supply = <&vcc_emmc>;
170 status = "okay";
171 };
172
173 &i2c0 {
174 clock-frequency = <400000>;
175 status = "okay";
176
177 ak8963: ak8963@d {
178 compatible = "asahi-kasei,ak89
179 reg = <0x0d>;
180 interrupt-parent = <&gpio4>;
181 interrupts = <RK_PC1 IRQ_TYPE_
182 pinctrl-names = "default";
183 pinctrl-0 = <&comp_int>;
184 };
185
186 mma8452: mma8452@1d {
187 compatible = "fsl,mma8452";
188 reg = <0x1d>;
189 interrupt-parent = <&gpio4>;
190 interrupts = <RK_PC0 IRQ_TYPE_
191 pinctrl-names = "default";
192 pinctrl-0 = <&gsensor_int>;
193 };
194 };
195
196 &i2c1 {
197 clock-frequency = <400000>;
198 status = "okay";
199
200 tps: tps@2d {
201 reg = <0x2d>;
202 interrupt-parent = <&gpio6>;
203 interrupts = <RK_PA4 IRQ_TYPE_
204 pinctrl-names = "default";
205 pinctrl-0 = <&pmic_int>, <&pwr
206
207 vcc1-supply = <&vsys>;
208 vcc2-supply = <&vsys>;
209 vcc3-supply = <&vsys>;
210 vcc4-supply = <&vsys>;
211 vcc5-supply = <&vcc_io>;
212 vcc6-supply = <&vcc_io>;
213 vcc7-supply = <&vsys>;
214 vccio-supply = <&vsys>;
215
216 regulators {
217 vcc_rtc: regulator@0 {
218 regulator-name
219 regulator-alwa
220 };
221
222 vcc_io: regulator@1 {
223 regulator-name
224 regulator-min-
225 regulator-max-
226 regulator-alwa
227 };
228
229 vdd_arm: regulator@2 {
230 regulator-name
231 regulator-min-
232 regulator-max-
233 regulator-alwa
234 regulator-boot
235 };
236
237 vcc_ddr: regulator@3 {
238 regulator-name
239 regulator-min-
240 regulator-max-
241 regulator-alwa
242 regulator-boot
243 };
244
245 vcc18: regulator@5 {
246 regulator-name
247 regulator-min-
248 regulator-max-
249 regulator-alwa
250 };
251
252 vdd_11: regulator@6 {
253 regulator-name
254 regulator-min-
255 regulator-max-
256 regulator-alwa
257 };
258
259 vcc_25: regulator@7 {
260 regulator-name
261 regulator-min-
262 regulator-max-
263 regulator-alwa
264 };
265
266 vccio_wl: regulator@8
267 regulator-name
268 regulator-min-
269 regulator-max-
270 };
271
272 vcc25_hdmi: regulator@
273 regulator-name
274 regulator-min-
275 regulator-max-
276 };
277
278 vcca_33: regulator@10
279 regulator-name
280 regulator-min-
281 regulator-max-
282 };
283
284 vcc_rmii: regulator@11
285 regulator-name
286 regulator-min-
287 regulator-max-
288 };
289
290 vcc28_cif: regulator@1
291 regulator-name
292 regulator-min-
293 regulator-max-
294 };
295 };
296 };
297 };
298
299 #include "../tps65910.dtsi"
300
301 &i2c2 {
302 status = "okay";
303 };
304
305 &i2c3 {
306 status = "okay";
307 };
308
309 &i2c4 {
310 status = "okay";
311 };
312
313 &mmc0 {
314 bus-width = <4>;
315 disable-wp;
316 pinctrl-names = "default";
317 pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&
318 vmmc-supply = <&vcc_sd>;
319 cap-mmc-highspeed;
320 cap-sd-highspeed;
321 status = "okay";
322 };
323
324 &mmc1 {
325 bus-width = <4>;
326 non-removable;
327 pinctrl-names = "default";
328 pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&
329 vmmc-supply = <&vccio_wl>;
330 status = "okay";
331 };
332
333 &pinctrl {
334 pcfg_output_high: pcfg-output-high {
335 output-high;
336 };
337
338 ak8963 {
339 comp_int: comp-int {
340 rockchip,pins = <4 RK_
341 };
342 };
343
344 emac {
345 rmii_rst: rmii-rst {
346 rockchip,pins = <1 RK_
347 };
348 };
349
350 ir {
351 ir_int: ir-int {
352 rockchip,pins = <6 RK_
353 };
354 };
355
356 keys {
357 pwr_key: pwr-key {
358 rockchip,pins = <6 RK_
359 };
360 };
361
362 mma8452 {
363 gsensor_int: gsensor-int {
364 rockchip,pins = <4 RK_
365 };
366 };
367
368 mmc {
369 sdmmc_pwr: sdmmc-pwr {
370 rockchip,pins = <3 RK_
371 };
372 };
373
374 usb_host {
375 host_drv: host-drv {
376 rockchip,pins = <0 RK_
377 };
378
379 hub_rst: hub-rst {
380 rockchip,pins = <1 RK_
381 };
382
383 sata_pwr: sata-pwr {
384 rockchip,pins = <4 RK_
385 };
386
387 sata_reset: sata-reset {
388 rockchip,pins = <0 RK_
389 };
390 };
391
392 usb_otg {
393 otg_drv: otg-drv {
394 rockchip,pins = <0 RK_
395 };
396 };
397
398 tps {
399 pmic_int: pmic-int {
400 rockchip,pins = <6 RK_
401 };
402
403 pwr_hold: pwr-hold {
404 rockchip,pins = <6 RK_
405 };
406 };
407 };
408
409 &pwm1 {
410 status = "okay";
411 };
412
413 &pwm2 {
414 status = "okay";
415 };
416
417 &pwm3 {
418 status = "okay";
419 };
420
421 &saradc {
422 vref-supply = <&vcc_25>;
423 status = "okay";
424 };
425
426 &spi0 {
427 status = "okay";
428 };
429
430 &uart0 {
431 pinctrl-names = "default";
432 pinctrl-0 = <&uart0_xfer>, <&uart0_cts
433 status = "okay";
434 };
435
436 &uart2 {
437 status = "okay";
438 };
439
440 &uart3 {
441 pinctrl-names = "default";
442 pinctrl-0 = <&uart3_xfer>, <&uart3_cts
443 status = "okay";
444 };
445
446 &usb_host {
447 pinctrl-names = "default";
448 pinctrl-0 = <&hub_rst>, <&sata_reset>;
449 status = "okay";
450 };
451
452 &usbphy {
453 status = "okay";
454 };
455
456 &usb_otg {
457 status = "okay";
458 };
459
460 &wdt {
461 status = "okay";
462 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.