1 // SPDX-License-Identifier: (GPL-2.0-or-later
2 /*
3 * Copyright (C) 2020 STMicroelectronics - All
4 * Copyright (C) 2021 Rouven Czerwinski, Pengu
5 * Copyright (C) 2023 Leonard Göhrs, Pengutro
6 */
7
8 #include "stm32mp15xc.dtsi"
9 #include "stm32mp15xx-osd32.dtsi"
10 #include "stm32mp15xxac-pinctrl.dtsi"
11
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/input/input.h>
14 #include <dt-bindings/leds/common.h>
15 #include <dt-bindings/pwm/pwm.h>
16
17 / {
18 aliases {
19 ethernet0 = ðernet0;
20 ethernet1 = &port_uplink;
21 ethernet2 = &port_dut;
22 mmc1 = &sdmmc2;
23 serial0 = &uart4;
24 serial1 = &usart3;
25 };
26
27 chosen {
28 stdout-path = &uart4;
29 };
30
31 led-controller-0 {
32 compatible = "gpio-leds";
33
34 led-0 {
35 label = "tac:green:use
36 gpios = <&gpiof 10 GPI
37 linux,default-trigger
38 };
39
40 led-1 {
41 label = "tac:green:use
42 gpios = <&gpiog 7 GPIO
43 };
44
45 led-2 {
46 label = "tac:green:sta
47 gpios = <&gpioa 13 GPI
48 };
49
50 /* led-3 and led-4 are interna
51 * another inside the ethernet
52 * GPIOA14 ---+---|led-3|>--+-
53 * +--<|led-4|---+
54 * E.g. only one of the LEDs c
55 * the other output must be dr
56 * This should likely be imple
57 * driver for antiparallel LED
58 */
59 led-3 {
60 label = "tac:green:sta
61 gpios = <&gpioa 14 GPI
62 };
63
64 led-4 {
65 label = "tac:orange:st
66 gpios = <&gpiod 15 GPI
67 };
68 };
69
70 gpio-keys {
71 compatible = "gpio-keys";
72
73 button-lower {
74 label = "USER_BTN2";
75 linux,code = <KEY_ESC>
76 gpios = <&gpioe 7 (GPI
77 };
78
79 button-upper {
80 label = "USER_BTN";
81 linux,code = <KEY_HOME
82 gpios = <&gpioi 11 (GP
83 };
84 };
85
86 /* supplied by either barrel connector
87 reg_12v: regulator-12v {
88 compatible = "regulator-fixed"
89 regulator-name = "12V";
90 regulator-min-microvolt = <120
91 regulator-max-microvolt = <120
92 regulator-always-on;
93 };
94
95 reg_5v: regulator-5v {
96 compatible = "regulator-fixed"
97 regulator-name = "5V";
98 regulator-min-microvolt = <500
99 regulator-max-microvolt = <500
100 regulator-always-on;
101 vin-supply = <®_12v>;
102 };
103
104 reg_1v2: regulator-1v2 {
105 compatible = "regulator-fixed"
106 regulator-name = "1V2";
107 regulator-min-microvolt = <120
108 regulator-max-microvolt = <120
109 regulator-always-on;
110 vin-supply = <®_5v>;
111 };
112
113 reg_pb_5v: regulator-pb-5v {
114 compatible = "regulator-fixed"
115 regulator-name = "5V_POWERBOAR
116 regulator-min-microvolt = <500
117 regulator-max-microvolt = <500
118 regulator-always-on;
119 vin-supply = <®_5v>;
120 };
121
122 reg_pb_3v3: regulator-pb-3v3 {
123 compatible = "regulator-fixed"
124 regulator-name = "3V3_POWERBOA
125 regulator-min-microvolt = <330
126 regulator-max-microvolt = <330
127 regulator-always-on;
128 vin-supply = <®_pb_5v>;
129 };
130
131 output-iobus-12v {
132 compatible = "regulator-output
133 vout-supply = <®_iobus_12v>
134 };
135
136 output-vuart {
137 compatible = "regulator-output
138 vout-supply = <&v3v3_hdmi>;
139 };
140 };
141
142 baseboard_eeprom: &sip_eeprom {
143 };
144
145 &adc {
146 pinctrl-names = "default";
147 pinctrl-0 = <&adc1_ain_pins_a>;
148 vdd-supply = <&vdd>;
149 vdda-supply = <&vdda>;
150 vref-supply = <&vrefbuf>;
151 status = "okay";
152
153 adc1: adc@0 {
154 st,adc-channels = <0 1 2 5 9 1
155 st,min-sample-time-nsecs = <50
156 #address-cells = <1>;
157 #size-cells = <0>;
158 status = "okay";
159
160 channel@0 {
161 reg = <0>;
162 label = "HOST_2_CURR_F
163 };
164
165 channel@1 {
166 reg = <1>;
167 label = "HOST_3_CURR_F
168 };
169
170 channel@2 {
171 reg = <2>;
172 label = "OUT_0_FB";
173 };
174
175 channel@5 {
176 reg = <5>;
177 label = "IOBUS_CURR_FB
178 };
179
180 channel@9 {
181 reg = <9>;
182 label = "IOBUS_VOLT_FB
183 };
184
185 channel@10 {
186 reg = <10>;
187 label = "OUT_1_FB";
188 };
189
190 channel@13 {
191 reg = <13>;
192 label = "HOST_CURR_FB"
193 };
194
195 channel@15 {
196 reg = <15>;
197 label = "HOST_1_CURR_F
198 };
199 };
200
201 adc2: adc@100 {
202 st,adc-channels = <12>;
203 st,min-sample-time-nsecs = <50
204 #address-cells = <1>;
205 #size-cells = <0>;
206 status = "okay";
207
208 channel@12 {
209 reg = <12>;
210 label = "TEMP_INTERNAL
211 };
212 };
213 };
214
215 &crc1 {
216 status = "okay";
217 };
218
219 &cryp1 {
220 status = "okay";
221 };
222
223 &dts {
224 status = "okay";
225 };
226
227 ðernet0 {
228 assigned-clocks = <&rcc ETHCK_K>, <&rc
229 assigned-clock-parents = <&rcc PLL4_P>
230 assigned-clock-rates = <125000000>; /*
231
232 pinctrl-names = "default", "sleep";
233 pinctrl-0 = <ðernet0_rgmii_pins_e>;
234 pinctrl-1 = <ðernet0_rgmii_sleep_pi
235
236 st,eth-clk-sel;
237 phy-mode = "rgmii-id";
238
239 status = "okay";
240
241 fixed-link {
242 speed = <1000>;
243 full-duplex;
244 };
245 };
246
247 ðernet0_rgmii_pins_e {
248 pins1 {
249 /* Reduce EMI emission by redu
250 slew-rate = <1>;
251 };
252 };
253
254 &gpiob {
255 gpio-line-names = "", "", "", "", "",
256 "", "USB_RESET", "", "", "",
257 "", "", "", "", "",
258 "";
259 };
260
261 &gpiod {
262 gpio-line-names = "", "", "", "", "TP3
263 "TP39", "", "", "TP41", "TP42",
264 "OLED_DC", "", "", "ETH_CS", "",
265 "ETH_LAB_LEDRN";
266 };
267
268 &gpioe {
269 gpio-line-names = "TP35", "", "", "",
270 "", "", "USER_BTN2", "TP48", "UART_TX_
271 "UART_RX_EN", "TP24", "", "TP25", "TP2
272 "TP27";
273 };
274
275 &gpiof {
276 gpio-line-names = "TP36", "TP37", "",
277 "", "", "", "", "",
278 "USER_LED1", "", "STACK_CS0", "", "",
279 "";
280 };
281
282 &gpiog {
283 gpio-line-names = "ETH_RESET", "", "",
284 "IOBUS_FLT_FB", "", "USER_LED2", "ETH1
285 "TP49", "", "", "", "",
286 "";
287 };
288
289 &gpioh {
290 gpio-line-names = "", "", "OUT_1", "OU
291 "", "", "", "", "",
292 "ETH1_PPS_B", "ETH_GPIO2", "", "IOBUS_
293 "TP33";
294 };
295
296 &gpioi {
297 gpio-line-names = "TIM_RTS", "", "", "
298 "", "", "", "ETH_WOL", "TP43",
299 "", "USER_BTN";
300 };
301
302 &gpioz {
303 gpio-line-names = "HWID0", "HWID1", "H
304 "", "HWID4", "HWID5";
305 };
306
307 &hash1 {
308 status = "okay";
309 };
310
311 &i2c1 {
312 pinctrl-names = "default", "sleep";
313 pinctrl-0 = <&i2c1_pins_b>;
314 pinctrl-1 = <&i2c1_sleep_pins_b>;
315 status = "okay";
316
317 powerboard_eeprom: eeprom@50 {
318 compatible = "atmel,24c02";
319 reg = <0x50>;
320 vcc-supply = <&v3v3>;
321 };
322
323 temperature-sensor@48 {
324 compatible = "national,lm75a";
325 reg = <0x48>;
326 status = "disabled";
327 };
328 };
329
330 &i2c5 {
331 /delete-property/dmas;
332 /delete-property/dma-names;
333
334 pinctrl-names = "default", "sleep";
335 pinctrl-0 = <&i2c5_pins_b>;
336 pinctrl-1 = <&i2c5_sleep_pins_b>;
337
338 status = "okay";
339
340 usbhub: usbhub@2c {
341 compatible ="microchip,usb2514
342 reg = <0x2c>;
343 vdd-supply = <&v3v3>;
344 reset-gpios = <&gpiob 6 GPIO_A
345 };
346 };
347
348 &iwdg2 {
349 timeout-sec = <8>;
350 status = "okay";
351 };
352
353 &m_can1 {
354 pinctrl-names = "default", "sleep";
355 pinctrl-0 = <&m_can1_pins_b>;
356 pinctrl-1 = <&m_can1_sleep_pins_b>;
357 status = "okay";
358 };
359
360 &m_can2 {
361 pinctrl-names = "default", "sleep";
362 pinctrl-0 = <&m_can2_pins_a>;
363 pinctrl-1 = <&m_can2_sleep_pins_a>;
364 status = "okay";
365 };
366
367 &pmic {
368 regulators {
369 buck1-supply = <®_5v>;
370 buck2-supply = <®_5v>;
371 buck3-supply = <®_5v>;
372 buck4-supply = <®_5v>;
373 ldo2-supply = <®_5v>;
374 ldo4-supply = <®_5v>;
375 ldo5-supply = <®_5v>;
376 vref_ddr-supply = <®_5v>;
377 boost-supply = <®_5v>;
378 pwr_sw2-supply = <&bst_out>;
379 };
380 };
381
382 &rtc {
383 status = "okay";
384 };
385
386 &sdmmc2 {
387 pinctrl-names = "default", "opendrain"
388 pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2
389 pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdm
390 pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &
391 vmmc-supply = <&v3v3>;
392
393 bus-width = <8>;
394 mmc-ddr-3_3v;
395 no-1-8-v;
396 non-removable;
397 no-sd;
398 no-sdio;
399 st,neg-edge;
400
401 status = "okay";
402 };
403
404 &spi2 {
405 pinctrl-names = "default";
406 pinctrl-0 = <&spi2_pins_c>;
407 cs-gpios = <&gpiof 12 (GPIO_ACTIVE_LOW
408 status = "okay";
409 };
410
411 &spi4 {
412 pinctrl-names = "default";
413 pinctrl-0 = <&spi4_pins_a>;
414 cs-gpios = <&gpiof 4 GPIO_ACTIVE_LOW>;
415 status = "okay";
416
417 lcd: display@0 {
418 compatible = "shineworld,lh133
419 reg = <0>;
420 power-supply = <&v3v3>;
421 io-supply = <&v3v3>;
422 backlight = <&backlight>;
423 dc-gpios = <&gpiod 10 GPIO_ACT
424 reset-gpios = <&gpioh 4 GPIO_A
425 spi-3wire;
426 spi-max-frequency = <32000000>
427
428 width-mm = <23>;
429 height-mm = <23>;
430 rotation = <180>;
431
432 panel-timing {
433 hactive = <240>;
434 vactive = <240>;
435 hback-porch = <0>;
436 vback-porch = <0>;
437
438 clock-frequency = <0>;
439 hfront-porch = <0>;
440 hsync-len = <0>;
441 vfront-porch = <0>;
442 vsync-len = <0>;
443 };
444 };
445 };
446
447 &spi5 {
448 pinctrl-names = "default";
449 pinctrl-0 = <&spi5_pins_a>;
450
451 /* spare dmas for other usage */
452 /delete-property/dmas;
453 /delete-property/dma-names;
454
455 cs-gpios = <&gpiod 13 GPIO_ACTIVE_LOW>
456
457 status = "okay";
458
459 switch: switch@0 {
460 compatible = "microchip,ksz956
461 reg = <0>;
462
463 reset-gpios = <&gpiog 0 GPIO_A
464 spi-max-frequency = <44000000>
465
466 interrupt-parent = <&gpioa>;
467 interrupts = <6 IRQ_TYPE_EDGE_
468
469 /* Reduce RGMII EMI emissions
470 microchip,hi-drive-strength-mi
471 microchip,lo-drive-strength-mi
472
473 ports {
474 #address-cells = <1>;
475 #size-cells = <0>;
476 port_dut: port@0 {
477 reg = <0>;
478 label = "dut";
479 };
480
481 port_uplink: port@1 {
482 reg = <1>;
483 label = "uplin
484 };
485
486 port_cpu: port@2 {
487 reg = <2>;
488 label = "cpu";
489
490 ethernet = <&e
491
492 phy-mode = "rg
493 rx-internal-de
494 tx-internal-de
495
496 fixed-link {
497 speed
498 full-d
499 };
500 };
501 };
502 };
503 };
504
505 &timers2 {
506 /* spare dmas for other usage */
507 /delete-property/dmas;
508 /delete-property/dma-names;
509
510 status = "okay";
511
512 timer@1 {
513 status = "okay";
514 };
515 };
516
517 &timers3 {
518 /* spare dmas for other usage */
519 /delete-property/dmas;
520 /delete-property/dma-names;
521
522 status = "okay";
523
524 timer@2 {
525 status = "okay";
526 };
527 };
528
529 &timers4 {
530 /* spare dmas for other usage */
531 /delete-property/dmas;
532 /delete-property/dma-names;
533
534 status = "okay";
535
536 timer@3 {
537 status = "okay";
538 };
539 };
540
541 &uart4 {
542 label = "debug";
543
544 pinctrl-names = "default";
545 pinctrl-0 = <&uart4_pins_a>;
546
547 /* spare dmas for other usage */
548 /delete-property/dmas;
549 /delete-property/dma-names;
550
551 status = "okay";
552 };
553
554 &usart3 {
555 label = "dut";
556 uart-has-rtscts;
557
558 pinctrl-names = "default";
559 pinctrl-0 = <&usart3_pins_f>;
560
561 /* spare dmas for other usage */
562 /delete-property/dmas;
563 /delete-property/dma-names;
564
565 status = "okay";
566 };
567
568 &usbh_ehci {
569 status = "okay";
570 };
571
572 &usbotg_hs {
573 phys = <&usbphyc_port1 0>;
574 phy-names = "usb2-phy";
575
576 vusb_d-supply = <&vdd_usb>;
577 vusb_a-supply = <®18>;
578
579 dr_mode = "peripheral";
580
581 status = "okay";
582 };
583
584 &usbphyc {
585 status = "okay";
586 };
587
588 &vrefbuf {
589 regulator-min-microvolt = <2500000>;
590 regulator-max-microvolt = <2500000>;
591 vdda-supply = <&vdda>;
592
593 status = "okay";
594 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.