1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * Copyright (c) 2012, NVIDIA Corporation. All
4 */
5
6 #include <linux/linkage.h>
7
8 #include <soc/tegra/flowctrl.h>
9 #include <soc/tegra/fuse.h>
10
11 #include <asm/asm-offsets.h>
12 #include <asm/assembler.h>
13 #include <asm/cache.h>
14
15 #include "irammap.h"
16 #include "sleep.h"
17
18 #define EMC_CFG 0xc
19 #define EMC_ADR_CFG 0x10
20 #define EMC_TIMING_CONTROL 0x28
21 #define EMC_NOP 0xdc
22 #define EMC_SELF_REF 0xe0
23 #define EMC_MRW 0xe8
24 #define EMC_FBIO_CFG5 0x104
25 #define EMC_AUTO_CAL_CONFIG 0x2a4
26 #define EMC_AUTO_CAL_INTERVAL 0x2a8
27 #define EMC_AUTO_CAL_STATUS 0x2ac
28 #define EMC_REQ_CTRL 0x2b0
29 #define EMC_CFG_DIG_DLL 0x2bc
30 #define EMC_EMC_STATUS 0x2b4
31 #define EMC_ZCAL_INTERVAL 0x2e0
32 #define EMC_ZQ_CAL 0x2ec
33 #define EMC_XM2VTTGENPADCTRL 0x310
34 #define EMC_XM2VTTGENPADCTRL2 0x314
35
36 #define PMC_CTRL 0x0
37 #define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /*
38
39 #define PMC_PLLP_WB0_OVERRIDE 0xf8
40 #define PMC_IO_DPD_REQ 0x1b8
41 #define PMC_IO_DPD_STATUS 0x1bc
42
43 #define CLK_RESET_CCLK_BURST 0x20
44 #define CLK_RESET_CCLK_DIVIDER 0x24
45 #define CLK_RESET_SCLK_BURST 0x28
46 #define CLK_RESET_SCLK_DIVIDER 0x2c
47
48 #define CLK_RESET_PLLC_BASE 0x80
49 #define CLK_RESET_PLLC_MISC 0x8c
50 #define CLK_RESET_PLLM_BASE 0x90
51 #define CLK_RESET_PLLM_MISC 0x9c
52 #define CLK_RESET_PLLP_BASE 0xa0
53 #define CLK_RESET_PLLP_MISC 0xac
54 #define CLK_RESET_PLLA_BASE 0xb0
55 #define CLK_RESET_PLLA_MISC 0xbc
56 #define CLK_RESET_PLLX_BASE 0xe0
57 #define CLK_RESET_PLLX_MISC 0xe4
58 #define CLK_RESET_PLLX_MISC3 0x518
59 #define CLK_RESET_PLLX_MISC3_IDDQ 3
60 #define CLK_RESET_PLLM_MISC_IDDQ 5
61 #define CLK_RESET_PLLC_MISC_IDDQ 26
62 #define CLK_RESET_PLLP_RESHIFT 0x528
63 #define CLK_RESET_PLLP_RESHIFT_DEFAULT 0x3b
64 #define CLK_RESET_PLLP_RESHIFT_ENABLE 0x3
65
66 #define CLK_RESET_CLK_SOURCE_MSELECT 0x3b4
67
68 #define MSELECT_CLKM (0x3 <
69
70 #define LOCK_DELAY 50 /* safety delay after lo
71
72 #define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 <<
73
74 #define PLLA_STORE_MASK (1 <<
75 #define PLLC_STORE_MASK (1 <<
76 #define PLLM_STORE_MASK (1 <<
77 #define PLLP_STORE_MASK (1 <<
78 #define PLLX_STORE_MASK (1 <<
79 #define PLLM_PMC_STORE_MASK (1 <<
80
81 .arch armv7-a
82
83 .macro emc_device_mask, rd, base
84 ldr \rd, [\base, #EMC_ADR_CFG]
85 tst \rd, #0x1
86 moveq \rd, #(0x1 << 8)
87 movne \rd, #(0x3 << 8)
88 .endm
89
90 .macro emc_timing_update, rd, base
91 mov \rd, #1
92 str \rd, [\base, #EMC_TIMING_CONTR
93 1001:
94 ldr \rd, [\base, #EMC_EMC_STATUS]
95 tst \rd, #(0x1<<23) @ wait EMC_STA
96 bne 1001b
97 .endm
98
99 .macro test_pll_state, rd, test_mask
100 ldr \rd, tegra_pll_state
101 tst \rd, #\test_mask
102 .endm
103
104 .macro store_pll_state, rd, tmp, r_car_base, p
105 ldr \rd, [\r_car_base, #\pll_base]
106 tst \rd, #(1 << 30)
107 ldr \rd, tegra_pll_state
108 biceq \rd, \rd, #\pll_mask
109 orrne \rd, \rd, #\pll_mask
110 adr \tmp, tegra_pll_state
111 str \rd, [\tmp]
112 .endm
113
114 .macro store_pllm_pmc_state, rd, tmp, pmc_base
115 ldr \rd, [\pmc_base, #PMC_PLLP_WB0
116 tst \rd, #(1 << 12)
117 ldr \rd, tegra_pll_state
118 biceq \rd, \rd, #PLLM_PMC_STORE_MASK
119 orrne \rd, \rd, #PLLM_PMC_STORE_MASK
120 adr \tmp, tegra_pll_state
121 str \rd, [\tmp]
122 .endm
123
124 .macro pllm_pmc_enable, rd, pmc_base
125 test_pll_state \rd, PLLM_PMC_STORE_MAS
126
127 ldrne \rd, [\pmc_base, #PMC_PLLP_WB0
128 orrne \rd, \rd, #(1 << 12)
129 strne \rd, [\pmc_base, #PMC_PLLP_WB0
130 .endm
131
132 .macro pll_enable, rd, r_car_base, pll_base, p
133 test_pll_state \rd, \test_mask
134 beq 1f
135
136 ldr \rd, [\r_car_base, #\pll_base]
137 tst \rd, #(1 << 30)
138 orreq \rd, \rd, #(1 << 30)
139 streq \rd, [\r_car_base, #\pll_base]
140 /* Enable lock detector */
141 .if \pll_misc
142 ldr \rd, [\r_car_base, #\pll_misc]
143 bic \rd, \rd, #(1 << 18)
144 str \rd, [\r_car_base, #\pll_misc]
145 ldr \rd, [\r_car_base, #\pll_misc]
146 ldr \rd, [\r_car_base, #\pll_misc]
147 orr \rd, \rd, #(1 << 18)
148 str \rd, [\r_car_base, #\pll_misc]
149 .endif
150 1:
151 .endm
152
153 .macro pll_locked, rd, r_car_base, pll_base, t
154 test_pll_state \rd, \test_mask
155 beq 2f
156 1:
157 ldr \rd, [\r_car_base, #\pll_base]
158 tst \rd, #(1 << 27)
159 beq 1b
160 2:
161 .endm
162
163 .macro pll_iddq_exit, rd, car, iddq, iddq_bit
164 ldr \rd, [\car, #\iddq]
165 bic \rd, \rd, #(1<<\iddq_bit)
166 str \rd, [\car, #\iddq]
167 .endm
168
169 .macro pll_iddq_entry, rd, car, iddq, iddq_bit
170 ldr \rd, [\car, #\iddq]
171 orr \rd, \rd, #(1<<\iddq_bit)
172 str \rd, [\car, #\iddq]
173 .endm
174
175 #if defined(CONFIG_HOTPLUG_CPU) || defined(CON
176 /*
177 * tegra30_hotplug_shutdown(void)
178 *
179 * Powergates the current CPU.
180 * Should never return.
181 */
182 ENTRY(tegra30_hotplug_shutdown)
183 /* Powergate this CPU */
184 mov r0, #TEGRA30_POWER_HOTPLUG_SHU
185 bl tegra30_cpu_shutdown
186 ret lr @ shou
187 ENDPROC(tegra30_hotplug_shutdown)
188
189 /*
190 * tegra30_cpu_shutdown(unsigned long flags)
191 *
192 * Puts the current CPU in wait-for-event mode
193 * and powergates it -- flags (in R0) indicate
194 *
195 * r10 = SoC ID
196 * corrupts r0-r4, r10-r12
197 */
198 ENTRY(tegra30_cpu_shutdown)
199 cpu_id r3
200 tegra_get_soc_id TEGRA_APB_MISC_VIRT,
201 cmp r10, #TEGRA30
202 bne _no_cpu0_chk @ It's not Teg
203
204 cmp r3, #0
205 reteq lr @ Must never b
206 _no_cpu0_chk:
207
208 ldr r12, =TEGRA_FLOW_CTRL_VIRT
209 cpu_to_csr_reg r1, r3
210 add r1, r1, r12 @ virtual CSR
211 cpu_to_halt_reg r2, r3
212 add r2, r2, r12 @ virtual HALT
213
214 /*
215 * Clear this CPU's "event" and "inter
216 * it when halting but not before it i
217 */
218 movw r12, \
219 FLOW_CTRL_CSR_INTR_FLAG | FLOW
220 FLOW_CTRL_CSR_ENABLE
221 cmp r10, #TEGRA30
222 moveq r4, #(1 << 4)
223 movne r4, #(1 << 8)
224 ARM( orr r12, r12, r4, lsl r3 )
225 THUMB( lsl r4, r4, r3 )
226 THUMB( orr r12, r12, r4 )
227 str r12, [r1]
228
229 /* Halt this CPU. */
230 mov r3, #0x400
231 delay_1:
232 subs r3, r3, #1
233 bge delay_1;
234 cpsid a
235 ldr r3, [r1]
236 str r3, [r1]
237
238 tst r0, #TEGRA30_POWER_HOTPLUG_SHU
239 beq flow_ctrl_setting_for_lp2
240
241 /* flow controller set up for hotplug
242 mov r3, #FLOW_CTRL_WAITEVENT
243 b flow_ctrl_done
244 flow_ctrl_setting_for_lp2:
245 /* flow controller set up for LP2 */
246 cmp r10, #TEGRA30
247 moveq r3, #FLOW_CTRL_WAIT_FOR_INTERR
248 movne r3, #FLOW_CTRL_WAITEVENT
249 orrne r3, r3, #FLOW_CTRL_HALT_GIC_IR
250 orrne r3, r3, #FLOW_CTRL_HALT_GIC_FI
251 flow_ctrl_done:
252 cmp r10, #TEGRA30
253 str r3, [r2]
254 ldr r0, [r2]
255 b wfe_war
256
257 __cpu_reset_again:
258 dsb
259 .align 5
260 wfeeq
261 wfine
262 wfe_war:
263 b __cpu_reset_again
264
265 /*
266 * 38 nop's, which fills rest of wfe c
267 * 4 more cachelines with nop
268 */
269 .rept 38
270 nop
271 .endr
272 b .
273
274 ENDPROC(tegra30_cpu_shutdown)
275 #endif
276
277 #ifdef CONFIG_PM_SLEEP
278 /*
279 * tegra30_sleep_core_finish(unsigned long v2p
280 *
281 * Enters suspend in LP0 or LP1 by turning off
282 * tegra30_tear_down_core in IRAM
283 */
284 ENTRY(tegra30_sleep_core_finish)
285 mov r4, r0
286 /* Flush, disable the L1 data cache an
287 mov r0, #TEGRA_FLUSH_CACHE_ALL
288 bl tegra_disable_clean_inv_dcache
289 mov r0, r4
290
291 /*
292 * Preload all the address literals th
293 * CPU power-gating process, to avoid
294 * are not supported once SDRAM is put
295 * LP0 / LP1 use physical address, sin
296 * disabled before putting SDRAM into
297 * memory access due to page table wal
298 */
299 mov32 r4, TEGRA_PMC_BASE
300 mov32 r5, TEGRA_CLK_RESET_BASE
301 mov32 r6, TEGRA_FLOW_CTRL_BASE
302 mov32 r7, TEGRA_TMRUS_BASE
303
304 mov32 r3, tegra_shut_off_mmu
305 add r3, r3, r0
306
307 mov32 r0, tegra30_tear_down_core
308 mov32 r1, tegra30_iram_start
309 sub r0, r0, r1
310 mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA
311 add r0, r0, r1
312
313 ret r3
314 ENDPROC(tegra30_sleep_core_finish)
315
316 /*
317 * tegra30_pm_secondary_cpu_suspend(unsigned l
318 *
319 * Enters LP2 on secondary CPU by exiting cohe
320 */
321 ENTRY(tegra30_pm_secondary_cpu_suspend)
322 mov r7, lr
323
324 /* Flush and disable the L1 data cache
325 mov r0, #TEGRA_FLUSH_CACHE_LOUIS
326 bl tegra_disable_clean_inv_dcache
327
328 /* Powergate this CPU. */
329 mov r0, #0
330 bl tegra30_cpu_shutdown
331 mov r0, #1
332 ret r7
333 ENDPROC(tegra30_pm_secondary_cpu_suspend)
334
335 /*
336 * tegra30_tear_down_cpu
337 *
338 * Switches the CPU to enter sleep.
339 */
340 ENTRY(tegra30_tear_down_cpu)
341 mov32 r6, TEGRA_FLOW_CTRL_BASE
342
343 b tegra30_enter_sleep
344 ENDPROC(tegra30_tear_down_cpu)
345
346 /* START OF ROUTINES COPIED TO IRAM */
347 .align L1_CACHE_SHIFT
348 .globl tegra30_iram_start
349 tegra30_iram_start:
350
351 /*
352 * tegra30_lp1_reset
353 *
354 * reset vector for LP1 restore; copied into I
355 * Brings the system back up to a safe staring
356 * self-refresh, PLLC, PLLM and PLLP reenabled
357 * system clock running on the same PLL that i
358 * jumps to tegra_resume to restore virtual ad
359 * The physical address of tegra_resume expect
360 * PMC_SCRATCH41.
361 *
362 * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRA
363 */
364 ENTRY(tegra30_lp1_reset)
365 /*
366 * The CPU and system bus are running
367 * IRAM when this code is executed; im
368 * enable PLLP, PLLM, PLLC, PLLA and P
369 */
370 mov32 r0, TEGRA_CLK_RESET_BASE
371
372 mov r1, #(1 << 28)
373 str r1, [r0, #CLK_RESET_SCLK_BURST
374 str r1, [r0, #CLK_RESET_CCLK_BURST
375 mov r1, #0
376 str r1, [r0, #CLK_RESET_CCLK_DIVID
377 str r1, [r0, #CLK_RESET_SCLK_DIVID
378
379 tegra_get_soc_id TEGRA_APB_MISC_BASE,
380 cmp r10, #TEGRA30
381 beq _no_pll_iddq_exit
382
383 pll_iddq_exit r1, r0, CLK_RESET_PLLM_M
384 pll_iddq_exit r1, r0, CLK_RESET_PLLC_M
385 pll_iddq_exit r1, r0, CLK_RESET_PLLX_M
386
387 mov32 r7, TEGRA_TMRUS_BASE
388 ldr r1, [r7]
389 add r1, r1, #2
390 wait_until r1, r7, r3
391
392 /* enable PLLM via PMC */
393 mov32 r2, TEGRA_PMC_BASE
394 pllm_pmc_enable r1, r2
395
396 pll_enable r1, r0, CLK_RESET_PLLM_BASE
397 pll_enable r1, r0, CLK_RESET_PLLC_BASE
398 pll_enable r1, r0, CLK_RESET_PLLX_BASE
399
400 b _pll_m_c_x_done
401
402 _no_pll_iddq_exit:
403 /* enable PLLM via PMC */
404 mov32 r2, TEGRA_PMC_BASE
405 pllm_pmc_enable r1, r2
406
407 pll_enable r1, r0, CLK_RESET_PLLM_BASE
408 pll_enable r1, r0, CLK_RESET_PLLC_BASE
409
410 _pll_m_c_x_done:
411 pll_enable r1, r0, CLK_RESET_PLLP_BASE
412 pll_enable r1, r0, CLK_RESET_PLLA_BASE
413
414 pll_locked r1, r0, CLK_RESET_PLLM_BASE
415 pll_locked r1, r0, CLK_RESET_PLLP_BASE
416 pll_locked r1, r0, CLK_RESET_PLLA_BASE
417 pll_locked r1, r0, CLK_RESET_PLLC_BASE
418
419 /*
420 * CPUFreq driver could select other P
421 * enabled by the Tegra30 CLK driver o
422 * tegra30_cpu_clock_resume().
423 */
424 tegra_get_soc_id TEGRA_APB_MISC_BASE,
425 cmp r1, #TEGRA30
426 beq 1f
427
428 pll_locked r1, r0, CLK_RESET_PLLX_BASE
429
430 ldr r1, [r0, #CLK_RESET_PLLP_BASE]
431 bic r1, r1, #(1<<31) @ disa
432 str r1, [r0, #CLK_RESET_PLLP_BASE]
433
434 mov r1, #CLK_RESET_PLLP_RESHIFT_DE
435 str r1, [r0, #CLK_RESET_PLLP_RESHI
436 1:
437
438 mov32 r7, TEGRA_TMRUS_BASE
439 ldr r1, [r7]
440 add r1, r1, #LOCK_DELAY
441 wait_until r1, r7, r3
442
443 adr r5, tegra_sdram_pad_save
444
445 ldr r4, [r5, #0x18] @ rest
446 str r4, [r0, #CLK_RESET_CLK_SOURCE
447
448 ldr r4, [r5, #0x1C] @ rest
449 str r4, [r0, #CLK_RESET_SCLK_BURST
450
451 movw r4, #:lower16:((1 << 28) | (0x
452 movt r4, #:upper16:((1 << 28) | (0x
453 str r4, [r0, #CLK_RESET_CCLK_BURST
454
455 /* Restore pad power state to normal *
456 ldr r1, [r5, #0x14] @ PMC_
457 mvn r1, r1
458 bic r1, r1, #(1 << 31)
459 orr r1, r1, #(1 << 30)
460 str r1, [r2, #PMC_IO_DPD_REQ]
461
462 cmp r10, #TEGRA30
463 movweq r0, #:lower16:TEGRA_EMC_BASE
464 movteq r0, #:upper16:TEGRA_EMC_BASE
465 cmp r10, #TEGRA114
466 movweq r0, #:lower16:TEGRA_EMC0_BASE
467 movteq r0, #:upper16:TEGRA_EMC0_BASE
468 cmp r10, #TEGRA124
469 movweq r0, #:lower16:TEGRA124_EMC_BAS
470 movteq r0, #:upper16:TEGRA124_EMC_BAS
471
472 exit_self_refresh:
473 ldr r1, [r5, #0xC] @ rest
474 str r1, [r0, #EMC_XM2VTTGENPADCTRL
475 ldr r1, [r5, #0x10] @ rest
476 str r1, [r0, #EMC_XM2VTTGENPADCTRL
477 ldr r1, [r5, #0x8] @ rest
478 str r1, [r0, #EMC_AUTO_CAL_INTERVA
479
480 /* Relock DLL */
481 ldr r1, [r0, #EMC_CFG_DIG_DLL]
482 orr r1, r1, #(1 << 30) @ set
483 str r1, [r0, #EMC_CFG_DIG_DLL]
484
485 emc_timing_update r1, r0
486
487 cmp r10, #TEGRA114
488 movweq r1, #:lower16:TEGRA_EMC1_BASE
489 movteq r1, #:upper16:TEGRA_EMC1_BASE
490 cmpeq r0, r1
491
492 ldr r1, [r0, #EMC_AUTO_CAL_CONFIG]
493 orr r1, r1, #(1 << 31) @ set
494 orreq r1, r1, #(1 << 27) @ set
495 str r1, [r0, #EMC_AUTO_CAL_CONFIG]
496
497 emc_wait_auto_cal_onetime:
498 ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
499 tst r1, #(1 << 31) @ wait
500 bne emc_wait_auto_cal_onetime
501
502 ldr r1, [r0, #EMC_CFG]
503 bic r1, r1, #(1 << 31) @ disa
504 str r1, [r0, #EMC_CFG]
505
506 mov r1, #0
507 str r1, [r0, #EMC_SELF_REF] @ take
508 mov r1, #1
509 cmp r10, #TEGRA30
510 streq r1, [r0, #EMC_NOP]
511 streq r1, [r0, #EMC_NOP]
512
513 emc_device_mask r1, r0
514
515 exit_selfrefresh_loop:
516 ldr r2, [r0, #EMC_EMC_STATUS]
517 ands r2, r2, r1
518 bne exit_selfrefresh_loop
519
520 lsr r1, r1, #8 @ devS
521
522 mov32 r7, TEGRA_TMRUS_BASE
523 ldr r2, [r0, #EMC_FBIO_CFG5]
524
525 and r2, r2, #3 @ chec
526 cmp r2, #2
527 beq emc_lpddr2
528
529 /* Issue a ZQ_CAL for dev0 - DDR3 */
530 mov32 r2, 0x80000011 @ DEV_
531 str r2, [r0, #EMC_ZQ_CAL]
532 ldr r2, [r7]
533 add r2, r2, #10
534 wait_until r2, r7, r3
535
536 tst r1, #2
537 beq zcal_done
538
539 /* Issue a ZQ_CAL for dev1 - DDR3 */
540 mov32 r2, 0x40000011 @ DEV_
541 str r2, [r0, #EMC_ZQ_CAL]
542 ldr r2, [r7]
543 add r2, r2, #10
544 wait_until r2, r7, r3
545 b zcal_done
546
547 emc_lpddr2:
548 /* Issue a ZQ_CAL for dev0 - LPDDR2 */
549 mov32 r2, 0x800A00AB @ DEV_
550 str r2, [r0, #EMC_MRW]
551 ldr r2, [r7]
552 add r2, r2, #1
553 wait_until r2, r7, r3
554
555 tst r1, #2
556 beq zcal_done
557
558 /* Issue a ZQ_CAL for dev0 - LPDDR2 */
559 mov32 r2, 0x400A00AB @ DEV_
560 str r2, [r0, #EMC_MRW]
561 ldr r2, [r7]
562 add r2, r2, #1
563 wait_until r2, r7, r3
564
565 zcal_done:
566 mov r1, #0 @ unst
567 str r1, [r0, #EMC_REQ_CTRL]
568 ldr r1, [r5, #0x4] @ rest
569 str r1, [r0, #EMC_ZCAL_INTERVAL]
570 ldr r1, [r5, #0x0] @ rest
571 str r1, [r0, #EMC_CFG]
572
573 emc_timing_update r1, r0
574
575 /* Tegra114 had dual EMC channel, now
576 cmp r10, #TEGRA114
577 bne __no_dual_emc_chanl
578 mov32 r1, TEGRA_EMC1_BASE
579 cmp r0, r1
580 movne r0, r1
581 addne r5, r5, #0x20
582 bne exit_self_refresh
583 __no_dual_emc_chanl:
584
585 mov32 r0, TEGRA_PMC_BASE
586 ldr r0, [r0, #PMC_SCRATCH41]
587 ret r0 @ jump
588 ENDPROC(tegra30_lp1_reset)
589
590 .align L1_CACHE_SHIFT
591 tegra30_sdram_pad_address:
592 .word TEGRA_EMC_BASE + EMC_CFG
593 .word TEGRA_EMC_BASE + EMC_ZCAL_INTE
594 .word TEGRA_EMC_BASE + EMC_AUTO_CAL_
595 .word TEGRA_EMC_BASE + EMC_XM2VTTGEN
596 .word TEGRA_EMC_BASE + EMC_XM2VTTGEN
597 .word TEGRA_PMC_BASE + PMC_IO_DPD_ST
598 .word TEGRA_CLK_RESET_BASE + CLK_RES
599 .word TEGRA_CLK_RESET_BASE + CLK_RES
600 tegra30_sdram_pad_address_end:
601
602 tegra114_sdram_pad_address:
603 .word TEGRA_EMC0_BASE + EMC_CFG
604 .word TEGRA_EMC0_BASE + EMC_ZCAL_INT
605 .word TEGRA_EMC0_BASE + EMC_AUTO_CAL
606 .word TEGRA_EMC0_BASE + EMC_XM2VTTGE
607 .word TEGRA_EMC0_BASE + EMC_XM2VTTGE
608 .word TEGRA_PMC_BASE + PMC_IO_DPD_ST
609 .word TEGRA_CLK_RESET_BASE + CLK_RES
610 .word TEGRA_CLK_RESET_BASE + CLK_RES
611 .word TEGRA_EMC1_BASE + EMC_CFG
612 .word TEGRA_EMC1_BASE + EMC_ZCAL_INT
613 .word TEGRA_EMC1_BASE + EMC_AUTO_CAL
614 .word TEGRA_EMC1_BASE + EMC_XM2VTTGE
615 .word TEGRA_EMC1_BASE + EMC_XM2VTTGE
616 tegra114_sdram_pad_adress_end:
617
618 tegra124_sdram_pad_address:
619 .word TEGRA124_EMC_BASE + EMC_CFG
620 .word TEGRA124_EMC_BASE + EMC_ZCAL_I
621 .word TEGRA124_EMC_BASE + EMC_AUTO_C
622 .word TEGRA124_EMC_BASE + EMC_XM2VTT
623 .word TEGRA124_EMC_BASE + EMC_XM2VTT
624 .word TEGRA_PMC_BASE + PMC_IO_DPD_ST
625 .word TEGRA_CLK_RESET_BASE + CLK_RES
626 .word TEGRA_CLK_RESET_BASE + CLK_RES
627 tegra124_sdram_pad_address_end:
628
629 tegra30_sdram_pad_size:
630 .word tegra30_sdram_pad_address_end
631
632 tegra114_sdram_pad_size:
633 .word tegra114_sdram_pad_adress_end
634
635 .type tegra_sdram_pad_save, %object
636 tegra_sdram_pad_save:
637 .rept (tegra114_sdram_pad_adress_end -
638 .long 0
639 .endr
640
641 tegra_pll_state:
642 .word 0x0
643
644 /*
645 * tegra30_tear_down_core
646 *
647 * copied into and executed from IRAM
648 * puts memory in self-refresh for LP0 and LP1
649 */
650 tegra30_tear_down_core:
651 bl tegra30_sdram_self_refresh
652 bl tegra30_switch_cpu_to_clk32k
653 b tegra30_enter_sleep
654
655 /*
656 * tegra30_switch_cpu_to_clk32k
657 *
658 * In LP0 and LP1 all PLLs will be turned off.
659 * to the 32KHz clock.
660 * r4 = TEGRA_PMC_BASE
661 * r5 = TEGRA_CLK_RESET_BASE
662 * r6 = TEGRA_FLOW_CTRL_BASE
663 * r7 = TEGRA_TMRUS_BASE
664 * r10= SoC ID
665 */
666 tegra30_switch_cpu_to_clk32k:
667 /*
668 * start by jumping to CLKM to safely
669 * CLKS.
670 */
671 mov r0, #(1 << 28)
672 str r0, [r5, #CLK_RESET_SCLK_BURST
673 /* 2uS delay delay between changing SC
674 ldr r1, [r7]
675 add r1, r1, #2
676 wait_until r1, r7, r9
677 str r0, [r5, #CLK_RESET_CCLK_BURST
678 mov r0, #0
679 str r0, [r5, #CLK_RESET_CCLK_DIVID
680 str r0, [r5, #CLK_RESET_SCLK_DIVID
681
682 /* switch the clock source of mselect
683 ldr r0, [r5, #CLK_RESET_CLK_SOURCE
684 orr r0, r0, #MSELECT_CLKM
685 str r0, [r5, #CLK_RESET_CLK_SOURCE
686
687 /* 2uS delay delay between changing SC
688 ldr r1, [r7]
689 add r1, r1, #2
690 wait_until r1, r7, r9
691
692 /* store enable-state of PLLs */
693 store_pll_state r0, r1, r5, CLK_RESET_
694 store_pll_state r0, r1, r5, CLK_RESET_
695 store_pll_state r0, r1, r5, CLK_RESET_
696 store_pll_state r0, r1, r5, CLK_RESET_
697 store_pll_state r0, r1, r5, CLK_RESET_
698 store_pllm_pmc_state r0, r1, r4
699
700 /* disable PLLM via PMC in LP1 */
701 ldr r0, [r4, #PMC_PLLP_WB0_OVERRID
702 bic r0, r0, #(1 << 12)
703 str r0, [r4, #PMC_PLLP_WB0_OVERRID
704
705 /* disable PLLP, PLLA, PLLC and PLLX *
706 tegra_get_soc_id TEGRA_APB_MISC_BASE,
707 cmp r1, #TEGRA30
708 ldr r0, [r5, #CLK_RESET_PLLP_BASE]
709 orrne r0, r0, #(1 << 31) @ enab
710 bic r0, r0, #(1 << 30)
711 str r0, [r5, #CLK_RESET_PLLP_BASE]
712 beq 1f
713 mov r0, #CLK_RESET_PLLP_RESHIFT_EN
714 str r0, [r5, #CLK_RESET_PLLP_RESHI
715 1:
716 ldr r0, [r5, #CLK_RESET_PLLA_BASE]
717 bic r0, r0, #(1 << 30)
718 str r0, [r5, #CLK_RESET_PLLA_BASE]
719 ldr r0, [r5, #CLK_RESET_PLLC_BASE]
720 bic r0, r0, #(1 << 30)
721 str r0, [r5, #CLK_RESET_PLLC_BASE]
722 ldr r0, [r5, #CLK_RESET_PLLX_BASE]
723 bic r0, r0, #(1 << 30)
724 str r0, [r5, #CLK_RESET_PLLX_BASE]
725
726 cmp r10, #TEGRA30
727 beq _no_pll_in_iddq
728 pll_iddq_entry r1, r5, CLK_RESET_PLLX_
729 _no_pll_in_iddq:
730
731 /*
732 * Switch to clk_s (32KHz); bits 28:31
733 * Enable burst on CPU IRQ; bit 24=1
734 * Set IRQ burst clock source to clk_m
735 */
736 mov r0, #(1 << 24)
737 str r0, [r5, #CLK_RESET_SCLK_BURST
738
739 ret lr
740
741 /*
742 * tegra30_enter_sleep
743 *
744 * uses flow controller to enter sleep state
745 * executes from IRAM with SDRAM in selfrefres
746 * executes from SDRAM with target state is LP
747 * r6 = TEGRA_FLOW_CTRL_BASE
748 */
749 tegra30_enter_sleep:
750 cpu_id r1
751
752 cpu_to_csr_reg r2, r1
753 ldr r0, [r6, r2]
754 orr r0, r0, #FLOW_CTRL_CSR_INTR_FL
755 orr r0, r0, #FLOW_CTRL_CSR_ENABLE
756 str r0, [r6, r2]
757
758 tegra_get_soc_id TEGRA_APB_MISC_BASE,
759 cmp r10, #TEGRA30
760 mov r0, #FLOW_CTRL_WAIT_FOR_INTERR
761 orreq r0, r0, #FLOW_CTRL_HALT_CPU_IR
762 orrne r0, r0, #FLOW_CTRL_HALT_LIC_IR
763
764 cpu_to_halt_reg r2, r1
765 str r0, [r6, r2]
766 dsb
767 ldr r0, [r6, r2] /* memory barrier
768
769 cmp r10, #TEGRA30
770 halted:
771 isb
772 dsb
773 wfine /* CPU should be power gated h
774 wfeeq
775
776 /* !!!FIXME!!! Implement halt failure
777 b halted
778
779 /*
780 * tegra30_sdram_self_refresh
781 *
782 * called with MMU off and caches disabled
783 * must be executed from IRAM
784 * r4 = TEGRA_PMC_BASE
785 * r5 = TEGRA_CLK_RESET_BASE
786 * r6 = TEGRA_FLOW_CTRL_BASE
787 * r7 = TEGRA_TMRUS_BASE
788 * r10= SoC ID
789 */
790 tegra30_sdram_self_refresh:
791
792 adr r8, tegra_sdram_pad_save
793 tegra_get_soc_id TEGRA_APB_MISC_BASE,
794 cmp r10, #TEGRA30
795 adreq r2, tegra30_sdram_pad_address
796 ldreq r3, tegra30_sdram_pad_size
797 cmp r10, #TEGRA114
798 adreq r2, tegra114_sdram_pad_address
799 ldreq r3, tegra114_sdram_pad_size
800 cmp r10, #TEGRA124
801 adreq r2, tegra124_sdram_pad_address
802 ldreq r3, tegra30_sdram_pad_size
803
804 mov r9, #0
805
806 padsave:
807 ldr r0, [r2, r9] @ r0 i
808
809 ldr r1, [r0]
810 str r1, [r8, r9] @ save
811
812 add r9, r9, #4
813 cmp r3, r9
814 bne padsave
815 padsave_done:
816
817 dsb
818
819 cmp r10, #TEGRA30
820 ldreq r0, =TEGRA_EMC_BASE @ r0 r
821 cmp r10, #TEGRA114
822 ldreq r0, =TEGRA_EMC0_BASE
823 cmp r10, #TEGRA124
824 ldreq r0, =TEGRA124_EMC_BASE
825
826 enter_self_refresh:
827 cmp r10, #TEGRA30
828 mov r1, #0
829 str r1, [r0, #EMC_ZCAL_INTERVAL]
830 str r1, [r0, #EMC_AUTO_CAL_INTERVA
831 ldr r1, [r0, #EMC_CFG]
832 bic r1, r1, #(1 << 28)
833 bicne r1, r1, #(1 << 29)
834 str r1, [r0, #EMC_CFG] @ disa
835
836 emc_timing_update r1, r0
837
838 ldr r1, [r7]
839 add r1, r1, #5
840 wait_until r1, r7, r2
841
842 emc_wait_auto_cal:
843 ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
844 tst r1, #(1 << 31) @ wait
845 bne emc_wait_auto_cal
846
847 mov r1, #3
848 str r1, [r0, #EMC_REQ_CTRL] @ stal
849
850 emcidle:
851 ldr r1, [r0, #EMC_EMC_STATUS]
852 tst r1, #4
853 beq emcidle
854
855 mov r1, #1
856 str r1, [r0, #EMC_SELF_REF]
857
858 emc_device_mask r1, r0
859
860 emcself:
861 ldr r2, [r0, #EMC_EMC_STATUS]
862 and r2, r2, r1
863 cmp r2, r1
864 bne emcself @ loop
865
866 /* Put VTTGEN in the lowest power mode
867 ldr r1, [r0, #EMC_XM2VTTGENPADCTRL
868 mov32 r2, 0xF8F8FFFF @ clear XM2VTT
869 and r1, r1, r2
870 str r1, [r0, #EMC_XM2VTTGENPADCTRL
871 ldr r1, [r0, #EMC_XM2VTTGENPADCTRL
872 cmp r10, #TEGRA30
873 orreq r1, r1, #7 @ set
874 orrne r1, r1, #0x3f
875 str r1, [r0, #EMC_XM2VTTGENPADCTRL
876
877 emc_timing_update r1, r0
878
879 /* Tegra114 had dual EMC channel, now
880 cmp r10, #TEGRA114
881 bne no_dual_emc_chanl
882 mov32 r1, TEGRA_EMC1_BASE
883 cmp r0, r1
884 movne r0, r1
885 bne enter_self_refresh
886 no_dual_emc_chanl:
887
888 ldr r1, [r4, #PMC_CTRL]
889 tst r1, #PMC_CTRL_SIDE_EFFECT_LP0
890 bne pmc_io_dpd_skip
891 /*
892 * Put DDR_DATA, DISC_ADDR_CMD, DDR_AD
893 * and COMP in the lowest power mode w
894 */
895 mov32 r1, 0x8EC00000
896 str r1, [r4, #PMC_IO_DPD_REQ]
897 pmc_io_dpd_skip:
898
899 dsb
900
901 ret lr
902
903 .ltorg
904 /* dummy symbol for end of IRAM */
905 .align L1_CACHE_SHIFT
906 .global tegra30_iram_end
907 tegra30_iram_end:
908 b .
909 #endif
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.