1 # SPDX-License-Identifier: GPL-2.0-only !! 1 # SPDX-License-Identifier: GPL-2.0
2 config ARM64 !! 2 config M68K
3 def_bool y !! 3 bool
4 select ACPI_APMT if ACPI !! 4 default y
5 select ACPI_CCA_REQUIRED if ACPI !! 5 select ARCH_HAS_CPU_FINALIZE_INIT if MMU
6 select ACPI_GENERIC_GSI if ACPI !! 6 select ARCH_MIGHT_HAVE_PC_PARPORT if ISA
7 select ACPI_GTDT if ACPI !! 7 select ARCH_NO_COHERENT_DMA_MMAP if !MMU
8 select ACPI_HOTPLUG_CPU if ACPI_PROCES !! 8 select HAVE_IDE
9 select ACPI_IORT if ACPI !! 9 select HAVE_AOUT if MMU
10 select ACPI_REDUCED_HARDWARE_ONLY if A !! 10 select HAVE_DEBUG_BUGVERBOSE
11 select ACPI_MCFG if (ACPI && PCI) <<
12 select ACPI_SPCR_TABLE if ACPI <<
13 select ACPI_PPTT if ACPI <<
14 select ARCH_HAS_DEBUG_WX <<
15 select ARCH_BINFMT_ELF_EXTRA_PHDRS <<
16 select ARCH_BINFMT_ELF_STATE <<
17 select ARCH_CORRECT_STACKTRACE_ON_KRET <<
18 select ARCH_ENABLE_HUGEPAGE_MIGRATION <<
19 select ARCH_ENABLE_MEMORY_HOTPLUG <<
20 select ARCH_ENABLE_MEMORY_HOTREMOVE <<
21 select ARCH_ENABLE_SPLIT_PMD_PTLOCK if <<
22 select ARCH_ENABLE_THP_MIGRATION if TR <<
23 select ARCH_HAS_CACHE_LINE_SIZE <<
24 select ARCH_HAS_CURRENT_STACK_POINTER <<
25 select ARCH_HAS_DEBUG_VIRTUAL <<
26 select ARCH_HAS_DEBUG_VM_PGTABLE <<
27 select ARCH_HAS_DMA_OPS if XEN <<
28 select ARCH_HAS_DMA_PREP_COHERENT <<
29 select ARCH_HAS_ACPI_TABLE_UPGRADE if <<
30 select ARCH_HAS_FAST_MULTIPLIER <<
31 select ARCH_HAS_FORTIFY_SOURCE <<
32 select ARCH_HAS_GCOV_PROFILE_ALL <<
33 select ARCH_HAS_GIGANTIC_PAGE <<
34 select ARCH_HAS_KCOV <<
35 select ARCH_HAS_KERNEL_FPU_SUPPORT if <<
36 select ARCH_HAS_KEEPINITRD <<
37 select ARCH_HAS_MEMBARRIER_SYNC_CORE <<
38 select ARCH_HAS_MEM_ENCRYPT <<
39 select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS <<
40 select ARCH_HAS_NON_OVERLAPPING_ADDRES <<
41 select ARCH_HAS_PTE_DEVMAP <<
42 select ARCH_HAS_PTE_SPECIAL <<
43 select ARCH_HAS_HW_PTE_YOUNG <<
44 select ARCH_HAS_SETUP_DMA_OPS <<
45 select ARCH_HAS_SET_DIRECT_MAP <<
46 select ARCH_HAS_SET_MEMORY <<
47 select ARCH_STACKWALK <<
48 select ARCH_HAS_STRICT_KERNEL_RWX <<
49 select ARCH_HAS_STRICT_MODULE_RWX <<
50 select ARCH_HAS_SYNC_DMA_FOR_DEVICE <<
51 select ARCH_HAS_SYNC_DMA_FOR_CPU <<
52 select ARCH_HAS_SYSCALL_WRAPPER <<
53 select ARCH_HAS_TICK_BROADCAST if GENE <<
54 select ARCH_HAS_ZONE_DMA_SET if EXPERT <<
55 select ARCH_HAVE_ELF_PROT <<
56 select ARCH_HAVE_NMI_SAFE_CMPXCHG <<
57 select ARCH_HAVE_TRACE_MMIO_ACCESS <<
58 select ARCH_INLINE_READ_LOCK if !PREEM <<
59 select ARCH_INLINE_READ_LOCK_BH if !PR <<
60 select ARCH_INLINE_READ_LOCK_IRQ if !P <<
61 select ARCH_INLINE_READ_LOCK_IRQSAVE i <<
62 select ARCH_INLINE_READ_UNLOCK if !PRE <<
63 select ARCH_INLINE_READ_UNLOCK_BH if ! <<
64 select ARCH_INLINE_READ_UNLOCK_IRQ if <<
65 select ARCH_INLINE_READ_UNLOCK_IRQREST <<
66 select ARCH_INLINE_WRITE_LOCK if !PREE <<
67 select ARCH_INLINE_WRITE_LOCK_BH if !P <<
68 select ARCH_INLINE_WRITE_LOCK_IRQ if ! <<
69 select ARCH_INLINE_WRITE_LOCK_IRQSAVE <<
70 select ARCH_INLINE_WRITE_UNLOCK if !PR <<
71 select ARCH_INLINE_WRITE_UNLOCK_BH if <<
72 select ARCH_INLINE_WRITE_UNLOCK_IRQ if <<
73 select ARCH_INLINE_WRITE_UNLOCK_IRQRES <<
74 select ARCH_INLINE_SPIN_TRYLOCK if !PR <<
75 select ARCH_INLINE_SPIN_TRYLOCK_BH if <<
76 select ARCH_INLINE_SPIN_LOCK if !PREEM <<
77 select ARCH_INLINE_SPIN_LOCK_BH if !PR <<
78 select ARCH_INLINE_SPIN_LOCK_IRQ if !P <<
79 select ARCH_INLINE_SPIN_LOCK_IRQSAVE i <<
80 select ARCH_INLINE_SPIN_UNLOCK if !PRE <<
81 select ARCH_INLINE_SPIN_UNLOCK_BH if ! <<
82 select ARCH_INLINE_SPIN_UNLOCK_IRQ if <<
83 select ARCH_INLINE_SPIN_UNLOCK_IRQREST <<
84 select ARCH_KEEP_MEMBLOCK <<
85 select ARCH_MHP_MEMMAP_ON_MEMORY_ENABL <<
86 select ARCH_USE_CMPXCHG_LOCKREF <<
87 select ARCH_USE_GNU_PROPERTY <<
88 select ARCH_USE_MEMTEST <<
89 select ARCH_USE_QUEUED_RWLOCKS <<
90 select ARCH_USE_QUEUED_SPINLOCKS <<
91 select ARCH_USE_SYM_ANNOTATIONS <<
92 select ARCH_SUPPORTS_DEBUG_PAGEALLOC <<
93 select ARCH_SUPPORTS_HUGETLBFS <<
94 select ARCH_SUPPORTS_MEMORY_FAILURE <<
95 select ARCH_SUPPORTS_SHADOW_CALL_STACK <<
96 select ARCH_SUPPORTS_LTO_CLANG if CPU_ <<
97 select ARCH_SUPPORTS_LTO_CLANG_THIN <<
98 select ARCH_SUPPORTS_CFI_CLANG <<
99 select ARCH_SUPPORTS_ATOMIC_RMW <<
100 select ARCH_SUPPORTS_INT128 if CC_HAS_ <<
101 select ARCH_SUPPORTS_NUMA_BALANCING <<
102 select ARCH_SUPPORTS_PAGE_TABLE_CHECK <<
103 select ARCH_SUPPORTS_PER_VMA_LOCK <<
104 select ARCH_SUPPORTS_HUGE_PFNMAP if TR <<
105 select ARCH_SUPPORTS_RT <<
106 select ARCH_WANT_BATCHED_UNMAP_TLB_FLU <<
107 select ARCH_WANT_COMPAT_IPC_PARSE_VERS <<
108 select ARCH_WANT_DEFAULT_BPF_JIT <<
109 select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_ <<
110 select ARCH_WANT_FRAME_POINTERS <<
111 select ARCH_WANT_HUGE_PMD_SHARE if ARM <<
112 select ARCH_WANT_LD_ORPHAN_WARN <<
113 select ARCH_WANTS_EXECMEM_LATE if EXEC <<
114 select ARCH_WANTS_NO_INSTR <<
115 select ARCH_WANTS_THP_SWAP if ARM64_4K <<
116 select ARCH_HAS_UBSAN <<
117 select ARM_AMBA <<
118 select ARM_ARCH_TIMER <<
119 select ARM_GIC <<
120 select AUDIT_ARCH_COMPAT_GENERIC <<
121 select ARM_GIC_V2M if PCI <<
122 select ARM_GIC_V3 <<
123 select ARM_GIC_V3_ITS if PCI <<
124 select ARM_PSCI_FW <<
125 select BUILDTIME_TABLE_SORT <<
126 select CLONE_BACKWARDS <<
127 select COMMON_CLK <<
128 select CPU_PM if (SUSPEND || CPU_IDLE) <<
129 select CPUMASK_OFFSTACK if NR_CPUS > 2 <<
130 select CRC32 <<
131 select DCACHE_WORD_ACCESS <<
132 select DYNAMIC_FTRACE if FUNCTION_TRAC <<
133 select DMA_BOUNCE_UNALIGNED_KMALLOC <<
134 select DMA_DIRECT_REMAP <<
135 select EDAC_SUPPORT <<
136 select FRAME_POINTER <<
137 select FUNCTION_ALIGNMENT_4B <<
138 select FUNCTION_ALIGNMENT_8B if DYNAMI <<
139 select GENERIC_ALLOCATOR <<
140 select GENERIC_ARCH_TOPOLOGY <<
141 select GENERIC_CLOCKEVENTS_BROADCAST <<
142 select GENERIC_CPU_AUTOPROBE <<
143 select GENERIC_CPU_DEVICES <<
144 select GENERIC_CPU_VULNERABILITIES <<
145 select GENERIC_EARLY_IOREMAP <<
146 select GENERIC_IDLE_POLL_SETUP <<
147 select GENERIC_IOREMAP <<
148 select GENERIC_IRQ_IPI <<
149 select GENERIC_IRQ_PROBE <<
150 select GENERIC_IRQ_SHOW 11 select GENERIC_IRQ_SHOW
151 select GENERIC_IRQ_SHOW_LEVEL !! 12 select GENERIC_ATOMIC64
152 select GENERIC_LIB_DEVMEM_IS_ALLOWED !! 13 select HAVE_UID16
153 select GENERIC_PCI_IOMAP !! 14 select VIRT_TO_BUS
154 select GENERIC_PTDUMP !! 15 select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
155 select GENERIC_SCHED_CLOCK !! 16 select GENERIC_CPU_DEVICES
156 select GENERIC_SMP_IDLE_THREAD !! 17 select GENERIC_IOMAP
157 select GENERIC_TIME_VSYSCALL !! 18 select GENERIC_STRNCPY_FROM_USER if MMU
158 select GENERIC_GETTIMEOFDAY !! 19 select GENERIC_STRNLEN_USER if MMU
159 select GENERIC_VDSO_TIME_NS !! 20 select ARCH_WANT_IPC_PARSE_VERSION
160 select HARDIRQS_SW_RESEND !! 21 select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
161 select HAS_IOPORT !! 22 select HAVE_FUTEX_CMPXCHG if MMU && FUTEX
162 select HAVE_MOVE_PMD <<
163 select HAVE_MOVE_PUD <<
164 select HAVE_PCI <<
165 select HAVE_ACPI_APEI if (ACPI && EFI) <<
166 select HAVE_ALIGNED_STRUCT_PAGE <<
167 select HAVE_ARCH_AUDITSYSCALL <<
168 select HAVE_ARCH_BITREVERSE <<
169 select HAVE_ARCH_COMPILER_H <<
170 select HAVE_ARCH_HUGE_VMALLOC <<
171 select HAVE_ARCH_HUGE_VMAP <<
172 select HAVE_ARCH_JUMP_LABEL <<
173 select HAVE_ARCH_JUMP_LABEL_RELATIVE <<
174 select HAVE_ARCH_KASAN <<
175 select HAVE_ARCH_KASAN_VMALLOC <<
176 select HAVE_ARCH_KASAN_SW_TAGS <<
177 select HAVE_ARCH_KASAN_HW_TAGS if ARM6 <<
178 # Some instrumentation may be unsound, <<
179 select HAVE_ARCH_KCSAN if EXPERT <<
180 select HAVE_ARCH_KFENCE <<
181 select HAVE_ARCH_KGDB <<
182 select HAVE_ARCH_MMAP_RND_BITS <<
183 select HAVE_ARCH_MMAP_RND_COMPAT_BITS <<
184 select HAVE_ARCH_PREL32_RELOCATIONS <<
185 select HAVE_ARCH_RANDOMIZE_KSTACK_OFFS <<
186 select HAVE_ARCH_SECCOMP_FILTER <<
187 select HAVE_ARCH_STACKLEAK <<
188 select HAVE_ARCH_THREAD_STRUCT_WHITELI <<
189 select HAVE_ARCH_TRACEHOOK <<
190 select HAVE_ARCH_TRANSPARENT_HUGEPAGE <<
191 select HAVE_ARCH_VMAP_STACK <<
192 select HAVE_ARM_SMCCC <<
193 select HAVE_ASM_MODVERSIONS <<
194 select HAVE_EBPF_JIT <<
195 select HAVE_C_RECORDMCOUNT <<
196 select HAVE_CMPXCHG_DOUBLE <<
197 select HAVE_CMPXCHG_LOCAL <<
198 select HAVE_CONTEXT_TRACKING_USER <<
199 select HAVE_DEBUG_KMEMLEAK <<
200 select HAVE_DMA_CONTIGUOUS <<
201 select HAVE_DYNAMIC_FTRACE <<
202 select HAVE_DYNAMIC_FTRACE_WITH_ARGS \ <<
203 if (GCC_SUPPORTS_DYNAMIC_FTRAC <<
204 CLANG_SUPPORTS_DYNAMIC_FTR <<
205 select HAVE_DYNAMIC_FTRACE_WITH_DIRECT <<
206 if DYNAMIC_FTRACE_WITH_ARGS && <<
207 select HAVE_DYNAMIC_FTRACE_WITH_CALL_O <<
208 if (DYNAMIC_FTRACE_WITH_ARGS & <<
209 (CC_IS_CLANG || !CC_OPTIMI <<
210 select FTRACE_MCOUNT_USE_PATCHABLE_FUN <<
211 if DYNAMIC_FTRACE_WITH_ARGS <<
212 select HAVE_SAMPLE_FTRACE_DIRECT <<
213 select HAVE_SAMPLE_FTRACE_DIRECT_MULTI <<
214 select HAVE_EFFICIENT_UNALIGNED_ACCESS <<
215 select HAVE_GUP_FAST <<
216 select HAVE_FTRACE_MCOUNT_RECORD <<
217 select HAVE_FUNCTION_TRACER <<
218 select HAVE_FUNCTION_ERROR_INJECTION <<
219 select HAVE_FUNCTION_GRAPH_TRACER <<
220 select HAVE_FUNCTION_GRAPH_RETVAL <<
221 select HAVE_GCC_PLUGINS <<
222 select HAVE_HARDLOCKUP_DETECTOR_PERF i <<
223 HW_PERF_EVENTS && HAVE_PERF_EV <<
224 select HAVE_HW_BREAKPOINT if PERF_EVEN <<
225 select HAVE_IOREMAP_PROT <<
226 select HAVE_IRQ_TIME_ACCOUNTING <<
227 select HAVE_MOD_ARCH_SPECIFIC 23 select HAVE_MOD_ARCH_SPECIFIC
228 select HAVE_NMI !! 24 select MODULES_USE_ELF_REL
229 select HAVE_PERF_EVENTS <<
230 select HAVE_PERF_EVENTS_NMI if ARM64_P <<
231 select HAVE_PERF_REGS <<
232 select HAVE_PERF_USER_STACK_DUMP <<
233 select HAVE_PREEMPT_DYNAMIC_KEY <<
234 select HAVE_REGS_AND_STACK_ACCESS_API <<
235 select HAVE_POSIX_CPU_TIMERS_TASK_WORK <<
236 select HAVE_FUNCTION_ARG_ACCESS_API <<
237 select MMU_GATHER_RCU_TABLE_FREE <<
238 select HAVE_RSEQ <<
239 select HAVE_RUST if RUSTC_SUPPORTS_ARM <<
240 select HAVE_STACKPROTECTOR <<
241 select HAVE_SYSCALL_TRACEPOINTS <<
242 select HAVE_KPROBES <<
243 select HAVE_KRETPROBES <<
244 select HAVE_GENERIC_VDSO <<
245 select HOTPLUG_CORE_SYNC_DEAD if HOTPL <<
246 select IRQ_DOMAIN <<
247 select IRQ_FORCED_THREADING <<
248 select KASAN_VMALLOC if KASAN <<
249 select LOCK_MM_AND_FIND_VMA <<
250 select MODULES_USE_ELF_RELA 25 select MODULES_USE_ELF_RELA
251 select NEED_DMA_MAP_STATE !! 26 select OLD_SIGSUSPEND3
252 select NEED_SG_DMA_LENGTH !! 27 select OLD_SIGACTION
253 select OF <<
254 select OF_EARLY_FLATTREE <<
255 select PCI_DOMAINS_GENERIC if PCI <<
256 select PCI_ECAM if (ACPI && PCI) <<
257 select PCI_SYSCALL if PCI <<
258 select POWER_RESET <<
259 select POWER_SUPPLY <<
260 select SPARSE_IRQ <<
261 select SWIOTLB <<
262 select SYSCTL_EXCEPTION_TRACE <<
263 select THREAD_INFO_IN_TASK <<
264 select HAVE_ARCH_USERFAULTFD_MINOR if <<
265 select HAVE_ARCH_USERFAULTFD_WP if USE <<
266 select TRACE_IRQFLAGS_SUPPORT <<
267 select TRACE_IRQFLAGS_NMI_SUPPORT <<
268 select HAVE_SOFTIRQ_ON_OWN_STACK <<
269 select USER_STACKTRACE_SUPPORT <<
270 select VDSO_GETRANDOM <<
271 help <<
272 ARM 64-bit (AArch64) Linux support. <<
273 <<
274 config RUSTC_SUPPORTS_ARM64 <<
275 def_bool y <<
276 depends on CPU_LITTLE_ENDIAN <<
277 # Shadow call stack is only supported <<
278 # <<
279 # When using the UNWIND_PATCH_PAC_INTO <<
280 # required due to use of the -Zfixed-x <<
281 # <<
282 # Otherwise, rustc version 1.82+ is re <<
283 # -Zsanitizer=shadow-call-stack flag. <<
284 depends on !SHADOW_CALL_STACK || RUSTC <<
285 <<
286 config CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS <<
287 def_bool CC_IS_CLANG <<
288 # https://github.com/ClangBuiltLinux/l <<
289 depends on AS_IS_GNU || (AS_IS_LLVM && <<
290 <<
291 config GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS <<
292 def_bool CC_IS_GCC <<
293 depends on $(cc-option,-fpatchable-fun <<
294 <<
295 config 64BIT <<
296 def_bool y <<
297 <<
298 config MMU <<
299 def_bool y <<
300 <<
301 config ARM64_CONT_PTE_SHIFT <<
302 int <<
303 default 5 if PAGE_SIZE_64KB <<
304 default 7 if PAGE_SIZE_16KB <<
305 default 4 <<
306 <<
307 config ARM64_CONT_PMD_SHIFT <<
308 int <<
309 default 5 if PAGE_SIZE_64KB <<
310 default 5 if PAGE_SIZE_16KB <<
311 default 4 <<
312 <<
313 config ARCH_MMAP_RND_BITS_MIN <<
314 default 14 if PAGE_SIZE_64KB <<
315 default 16 if PAGE_SIZE_16KB <<
316 default 18 <<
317 <<
318 # max bits determined by the following formula <<
319 # VA_BITS - PAGE_SHIFT - 3 <<
320 config ARCH_MMAP_RND_BITS_MAX <<
321 default 19 if ARM64_VA_BITS=36 <<
322 default 24 if ARM64_VA_BITS=39 <<
323 default 27 if ARM64_VA_BITS=42 <<
324 default 30 if ARM64_VA_BITS=47 <<
325 default 29 if ARM64_VA_BITS=48 && ARM6 <<
326 default 31 if ARM64_VA_BITS=48 && ARM6 <<
327 default 33 if ARM64_VA_BITS=48 <<
328 default 14 if ARM64_64K_PAGES <<
329 default 16 if ARM64_16K_PAGES <<
330 default 18 <<
331 <<
332 config ARCH_MMAP_RND_COMPAT_BITS_MIN <<
333 default 7 if ARM64_64K_PAGES <<
334 default 9 if ARM64_16K_PAGES <<
335 default 11 <<
336 <<
337 config ARCH_MMAP_RND_COMPAT_BITS_MAX <<
338 default 16 <<
339 <<
340 config NO_IOPORT_MAP <<
341 def_bool y if !PCI <<
342 <<
343 config STACKTRACE_SUPPORT <<
344 def_bool y <<
345 <<
346 config ILLEGAL_POINTER_VALUE <<
347 hex <<
348 default 0xdead000000000000 <<
349 <<
350 config LOCKDEP_SUPPORT <<
351 def_bool y <<
352 <<
353 config GENERIC_BUG <<
354 def_bool y <<
355 depends on BUG <<
356 <<
357 config GENERIC_BUG_RELATIVE_POINTERS <<
358 def_bool y <<
359 depends on GENERIC_BUG <<
360 <<
361 config GENERIC_HWEIGHT <<
362 def_bool y <<
363 <<
364 config GENERIC_CSUM <<
365 def_bool y <<
366 <<
367 config GENERIC_CALIBRATE_DELAY <<
368 def_bool y <<
369 <<
370 config SMP <<
371 def_bool y <<
372 <<
373 config KERNEL_MODE_NEON <<
374 def_bool y <<
375 <<
376 config FIX_EARLYCON_MEM <<
377 def_bool y <<
378 <<
379 config PGTABLE_LEVELS <<
380 int <<
381 default 2 if ARM64_16K_PAGES && ARM64_ <<
382 default 2 if ARM64_64K_PAGES && ARM64_ <<
383 default 3 if ARM64_64K_PAGES && (ARM64 <<
384 default 3 if ARM64_4K_PAGES && ARM64_V <<
385 default 3 if ARM64_16K_PAGES && ARM64_ <<
386 default 4 if ARM64_16K_PAGES && (ARM64 <<
387 default 4 if !ARM64_64K_PAGES && ARM64 <<
388 default 5 if ARM64_4K_PAGES && ARM64_V <<
389 <<
390 config ARCH_SUPPORTS_UPROBES <<
391 def_bool y <<
392 28
393 config ARCH_PROC_KCORE_TEXT !! 29 config CPU_BIG_ENDIAN
394 def_bool y 30 def_bool y
395 31
396 config BROKEN_GAS_INST !! 32 config RWSEM_GENERIC_SPINLOCK
397 def_bool !$(as-instr,1:\n.inst 0\n.rep <<
398 <<
399 config BUILTIN_RETURN_ADDRESS_STRIPS_PAC <<
400 bool <<
401 # Clang's __builtin_return_address() s <<
402 # https://github.com/llvm/llvm-project <<
403 default y if CC_IS_CLANG <<
404 # GCC's __builtin_return_address() str <<
405 # and this was backported to 10.2.0, 9 <<
406 # https://gcc.gnu.org/bugzilla/show_bu <<
407 default y if CC_IS_GCC && (GCC_VERSION <<
408 default y if CC_IS_GCC && (GCC_VERSION <<
409 default y if CC_IS_GCC && (GCC_VERSION <<
410 default y if CC_IS_GCC && (GCC_VERSION <<
411 default n <<
412 <<
413 config KASAN_SHADOW_OFFSET <<
414 hex <<
415 depends on KASAN_GENERIC || KASAN_SW_T <<
416 default 0xdfff800000000000 if (ARM64_V <<
417 default 0xdfffc00000000000 if (ARM64_V <<
418 default 0xdffffe0000000000 if ARM64_VA <<
419 default 0xdfffffc000000000 if ARM64_VA <<
420 default 0xdffffff800000000 if ARM64_VA <<
421 default 0xefff800000000000 if (ARM64_V <<
422 default 0xefffc00000000000 if (ARM64_V <<
423 default 0xeffffe0000000000 if ARM64_VA <<
424 default 0xefffffc000000000 if ARM64_VA <<
425 default 0xeffffff800000000 if ARM64_VA <<
426 default 0xffffffffffffffff <<
427 <<
428 config UNWIND_TABLES <<
429 bool 33 bool
430 <<
431 source "arch/arm64/Kconfig.platforms" <<
432 <<
433 menu "Kernel Features" <<
434 <<
435 menu "ARM errata workarounds via the alternati <<
436 <<
437 config AMPERE_ERRATUM_AC03_CPU_38 <<
438 bool "AmpereOne: AC03_CPU_38: Certain <<
439 default y 34 default y
440 help <<
441 This option adds an alternative code <<
442 errata AC03_CPU_38 and AC04_CPU_10 o <<
443 <<
444 The affected design reports FEAT_HAF <<
445 ID_AA64MMFR1_EL1.HAFDBS, but (V)TCR_ <<
446 as required by the architecture. The <<
447 implementation suffers from an addit <<
448 A/D updates can occur after a PTE ha <<
449 <<
450 The workaround forces KVM to explici <<
451 which avoids enabling unadvertised h <<
452 at stage-2. <<
453 <<
454 If unsure, say Y. <<
455 35
456 config ARM64_WORKAROUND_CLEAN_CACHE !! 36 config RWSEM_XCHGADD_ALGORITHM
457 bool 37 bool
458 38
459 config ARM64_ERRATUM_826319 !! 39 config ARCH_HAS_ILOG2_U32
460 bool "Cortex-A53: 826319: System might <<
461 default y <<
462 select ARM64_WORKAROUND_CLEAN_CACHE <<
463 help <<
464 This option adds an alternative code <<
465 erratum 826319 on Cortex-A53 parts u <<
466 AXI master interface and an L2 cache <<
467 <<
468 If a Cortex-A53 uses an AMBA AXI4 AC <<
469 and is unable to accept a certain wr <<
470 not progress on read data presented <<
471 system can deadlock. <<
472 <<
473 The workaround promotes data cache c <<
474 data cache clean-and-invalidate. <<
475 Please note that this does not neces <<
476 as it depends on the alternative fra <<
477 the kernel if an affected CPU is det <<
478 <<
479 If unsure, say Y. <<
480 <<
481 config ARM64_ERRATUM_827319 <<
482 bool "Cortex-A53: 827319: Data cache c <<
483 default y <<
484 select ARM64_WORKAROUND_CLEAN_CACHE <<
485 help <<
486 This option adds an alternative code <<
487 erratum 827319 on Cortex-A53 parts u <<
488 master interface and an L2 cache. <<
489 <<
490 Under certain conditions this erratu <<
491 to occur at the same time as another <<
492 on the AMBA 5 CHI interface, which c <<
493 interconnect reorders the two transa <<
494 <<
495 The workaround promotes data cache c <<
496 data cache clean-and-invalidate. <<
497 Please note that this does not neces <<
498 as it depends on the alternative fra <<
499 the kernel if an affected CPU is det <<
500 <<
501 If unsure, say Y. <<
502 <<
503 config ARM64_ERRATUM_824069 <<
504 bool "Cortex-A53: 824069: Cache line m <<
505 default y <<
506 select ARM64_WORKAROUND_CLEAN_CACHE <<
507 help <<
508 This option adds an alternative code <<
509 erratum 824069 on Cortex-A53 parts u <<
510 to a coherent interconnect. <<
511 <<
512 If a Cortex-A53 processor is executi <<
513 write instruction at the same time a <<
514 cluster is executing a cache mainten <<
515 address, then this erratum might cau <<
516 incorrectly marked as dirty. <<
517 <<
518 The workaround promotes data cache c <<
519 data cache clean-and-invalidate. <<
520 Please note that this option does no <<
521 workaround, as it depends on the alt <<
522 only patch the kernel if an affected <<
523 <<
524 If unsure, say Y. <<
525 <<
526 config ARM64_ERRATUM_819472 <<
527 bool "Cortex-A53: 819472: Store exclus <<
528 default y <<
529 select ARM64_WORKAROUND_CLEAN_CACHE <<
530 help <<
531 This option adds an alternative code <<
532 erratum 819472 on Cortex-A53 parts u <<
533 present when it is connected to a co <<
534 <<
535 If the processor is executing a load <<
536 the same time as a processor in anot <<
537 maintenance operation to the same ad <<
538 cause data corruption. <<
539 <<
540 The workaround promotes data cache c <<
541 data cache clean-and-invalidate. <<
542 Please note that this does not neces <<
543 as it depends on the alternative fra <<
544 the kernel if an affected CPU is det <<
545 <<
546 If unsure, say Y. <<
547 <<
548 config ARM64_ERRATUM_832075 <<
549 bool "Cortex-A57: 832075: possible dea <<
550 default y <<
551 help <<
552 This option adds an alternative code <<
553 erratum 832075 on Cortex-A57 parts u <<
554 <<
555 Affected Cortex-A57 parts might dead <<
556 instructions to Write-Back memory ar <<
557 <<
558 The workaround is to promote device <<
559 semantics. <<
560 Please note that this does not neces <<
561 as it depends on the alternative fra <<
562 the kernel if an affected CPU is det <<
563 <<
564 If unsure, say Y. <<
565 <<
566 config ARM64_ERRATUM_834220 <<
567 bool "Cortex-A57: 834220: Stage 2 tran <<
568 depends on KVM <<
569 help <<
570 This option adds an alternative code <<
571 erratum 834220 on Cortex-A57 parts u <<
572 <<
573 Affected Cortex-A57 parts might repo <<
574 fault as the result of a Stage 1 fau <<
575 page boundary when there is a permis <<
576 alignment fault at Stage 1 and a tra <<
577 <<
578 The workaround is to verify that the <<
579 doesn't generate a fault before hand <<
580 Please note that this does not neces <<
581 as it depends on the alternative fra <<
582 the kernel if an affected CPU is det <<
583 <<
584 If unsure, say N. <<
585 <<
586 config ARM64_ERRATUM_1742098 <<
587 bool "Cortex-A57/A72: 1742098: ELR rec <<
588 depends on COMPAT <<
589 default y <<
590 help <<
591 This option removes the AES hwcap fo <<
592 workaround erratum 1742098 on Cortex <<
593 <<
594 Affected parts may corrupt the AES s <<
595 taken between a pair of AES instruct <<
596 are only present if the cryptography <<
597 All software should have a fallback <<
598 that don't implement the cryptograph <<
599 <<
600 If unsure, say Y. <<
601 <<
602 config ARM64_ERRATUM_845719 <<
603 bool "Cortex-A53: 845719: a load might <<
604 depends on COMPAT <<
605 default y <<
606 help <<
607 This option adds an alternative code <<
608 erratum 845719 on Cortex-A53 parts u <<
609 <<
610 When running a compat (AArch32) user <<
611 part, a load at EL0 from a virtual a <<
612 bits of the virtual address used by <<
613 might return incorrect data. <<
614 <<
615 The workaround is to write the conte <<
616 return to a 32-bit task. <<
617 Please note that this does not neces <<
618 as it depends on the alternative fra <<
619 the kernel if an affected CPU is det <<
620 <<
621 If unsure, say Y. <<
622 <<
623 config ARM64_ERRATUM_843419 <<
624 bool "Cortex-A53: 843419: A load or st <<
625 default y <<
626 help <<
627 This option links the kernel with '- <<
628 enables PLT support to replace certa <<
629 cause subsequent memory accesses to <<
630 Cortex-A53 parts up to r0p4. <<
631 <<
632 If unsure, say Y. <<
633 <<
634 config ARM64_LD_HAS_FIX_ERRATUM_843419 <<
635 def_bool $(ld-option,--fix-cortex-a53- <<
636 <<
637 config ARM64_ERRATUM_1024718 <<
638 bool "Cortex-A55: 1024718: Update of D <<
639 default y <<
640 help <<
641 This option adds a workaround for AR <<
642 <<
643 Affected Cortex-A55 cores (all revis <<
644 update of the hardware dirty bit whe <<
645 without a break-before-make. The wor <<
646 of hardware DBM locally on the affec <<
647 this erratum will continue to use th <<
648 <<
649 If unsure, say Y. <<
650 <<
651 config ARM64_ERRATUM_1418040 <<
652 bool "Cortex-A76/Neoverse-N1: MRC read <<
653 default y <<
654 depends on COMPAT <<
655 help <<
656 This option adds a workaround for AR <<
657 errata 1188873 and 1418040. <<
658 <<
659 Affected Cortex-A76/Neoverse-N1 core <<
660 cause register corruption when acces <<
661 from AArch32 userspace. <<
662 <<
663 If unsure, say Y. <<
664 <<
665 config ARM64_WORKAROUND_SPECULATIVE_AT <<
666 bool 40 bool
667 41
668 config ARM64_ERRATUM_1165522 !! 42 config ARCH_HAS_ILOG2_U64
669 bool "Cortex-A76: 1165522: Speculative <<
670 default y <<
671 select ARM64_WORKAROUND_SPECULATIVE_AT <<
672 help <<
673 This option adds a workaround for AR <<
674 <<
675 Affected Cortex-A76 cores (r0p0, r1p <<
676 corrupted TLBs by speculating an AT <<
677 context switch. <<
678 <<
679 If unsure, say Y. <<
680 <<
681 config ARM64_ERRATUM_1319367 <<
682 bool "Cortex-A57/A72: 1319537: Specula <<
683 default y <<
684 select ARM64_WORKAROUND_SPECULATIVE_AT <<
685 help <<
686 This option adds work arounds for AR <<
687 and A72 erratum 1319367 <<
688 <<
689 Cortex-A57 and A72 cores could end-u <<
690 speculating an AT instruction during <<
691 <<
692 If unsure, say Y. <<
693 <<
694 config ARM64_ERRATUM_1530923 <<
695 bool "Cortex-A55: 1530923: Speculative <<
696 default y <<
697 select ARM64_WORKAROUND_SPECULATIVE_AT <<
698 help <<
699 This option adds a workaround for AR <<
700 <<
701 Affected Cortex-A55 cores (r0p0, r0p <<
702 corrupted TLBs by speculating an AT <<
703 context switch. <<
704 <<
705 If unsure, say Y. <<
706 <<
707 config ARM64_WORKAROUND_REPEAT_TLBI <<
708 bool 43 bool
709 44
710 config ARM64_ERRATUM_2441007 !! 45 config GENERIC_HWEIGHT
711 bool "Cortex-A55: Completion of affect <<
712 select ARM64_WORKAROUND_REPEAT_TLBI <<
713 help <<
714 This option adds a workaround for AR <<
715 <<
716 Under very rare circumstances, affec <<
717 may not handle a race between a brea <<
718 CPU, and another CPU accessing the s <<
719 store to a page that has been unmapp <<
720 <<
721 Work around this by adding the affec <<
722 TLB sequences to be done twice. <<
723 <<
724 If unsure, say N. <<
725 <<
726 config ARM64_ERRATUM_1286807 <<
727 bool "Cortex-A76: Modification of the <<
728 select ARM64_WORKAROUND_REPEAT_TLBI <<
729 help <<
730 This option adds a workaround for AR <<
731 <<
732 On the affected Cortex-A76 cores (r0 <<
733 address for a cacheable mapping of a <<
734 accessed by a core while another cor <<
735 address to a new physical page using <<
736 break-before-make sequence, then und <<
737 TLBI+DSB completes before a read usi <<
738 invalidated has been observed by oth <<
739 workaround repeats the TLBI+DSB oper <<
740 <<
741 If unsure, say N. <<
742 <<
743 config ARM64_ERRATUM_1463225 <<
744 bool "Cortex-A76: Software Step might <<
745 default y <<
746 help <<
747 This option adds a workaround for Ar <<
748 <<
749 On the affected Cortex-A76 cores (r0 <<
750 of a system call instruction (SVC) c <<
751 subsequent interrupts when software <<
752 exception handler of the system call <<
753 is enabled or VHE is in use. <<
754 <<
755 Work around the erratum by triggerin <<
756 when handling a system call from a t <<
757 in a VHE configuration of the kernel <<
758 <<
759 If unsure, say Y. <<
760 <<
761 config ARM64_ERRATUM_1542419 <<
762 bool "Neoverse-N1: workaround mis-orde <<
763 help <<
764 This option adds a workaround for AR <<
765 1542419. <<
766 <<
767 Affected Neoverse-N1 cores could exe <<
768 modified by another CPU. The workaro <<
769 counterpart. <<
770 <<
771 Workaround the issue by hiding the D <<
772 forces user-space to perform cache m <<
773 <<
774 If unsure, say N. <<
775 <<
776 config ARM64_ERRATUM_1508412 <<
777 bool "Cortex-A77: 1508412: workaround <<
778 default y <<
779 help <<
780 This option adds a workaround for Ar <<
781 <<
782 Affected Cortex-A77 cores (r0p0, r1p <<
783 of a store-exclusive or read of PAR_ <<
784 non-cacheable memory attributes. The <<
785 counterpart. <<
786 <<
787 KVM guests must also have the workar <<
788 deadlock the system. <<
789 <<
790 Work around the issue by inserting D <<
791 register reads and warning KVM users <<
792 to prevent a speculative PAR_EL1 rea <<
793 <<
794 If unsure, say Y. <<
795 <<
796 config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MO <<
797 bool 46 bool
798 <<
799 config ARM64_ERRATUM_2051678 <<
800 bool "Cortex-A510: 2051678: disable Ha <<
801 default y 47 default y
802 help <<
803 This options adds the workaround for <<
804 Affected Cortex-A510 might not respe <<
805 hardware update of the page table's <<
806 is to not enable the feature on affe <<
807 <<
808 If unsure, say Y. <<
809 <<
810 config ARM64_ERRATUM_2077057 <<
811 bool "Cortex-A510: 2077057: workaround <<
812 default y <<
813 help <<
814 This option adds the workaround for <<
815 Affected Cortex-A510 may corrupt SPS <<
816 expected, but a Pointer Authenticati <<
817 erratum causes SPSR_EL1 to be copied <<
818 EL1 to cause a return to EL2 with a <<
819 <<
820 This can only happen when EL2 is ste <<
821 <<
822 When these conditions occur, the SPS <<
823 previous guest entry, and can be res <<
824 <<
825 If unsure, say Y. <<
826 <<
827 config ARM64_ERRATUM_2658417 <<
828 bool "Cortex-A510: 2658417: remove BF1 <<
829 default y <<
830 help <<
831 This option adds the workaround for <<
832 Affected Cortex-A510 (r0p0 to r1p1) <<
833 BFMMLA or VMMLA instructions in rare <<
834 A510 CPUs are using shared neon hard <<
835 discoverable by the kernel, hide the <<
836 user-space should not be using these <<
837 <<
838 If unsure, say Y. <<
839 <<
840 config ARM64_ERRATUM_2119858 <<
841 bool "Cortex-A710/X2: 2119858: workaro <<
842 default y <<
843 depends on CORESIGHT_TRBE <<
844 select ARM64_WORKAROUND_TRBE_OVERWRITE <<
845 help <<
846 This option adds the workaround for <<
847 <<
848 Affected Cortex-A710/X2 cores could <<
849 data at the base of the buffer (poin <<
850 the event of a WRAP event. <<
851 <<
852 Work around the issue by always maki <<
853 256 bytes before enabling the buffer <<
854 the buffer with ETM ignore packets u <<
855 48
856 If unsure, say Y. !! 49 config GENERIC_CALIBRATE_DELAY
857 <<
858 config ARM64_ERRATUM_2139208 <<
859 bool "Neoverse-N2: 2139208: workaround <<
860 default y <<
861 depends on CORESIGHT_TRBE <<
862 select ARM64_WORKAROUND_TRBE_OVERWRITE <<
863 help <<
864 This option adds the workaround for <<
865 <<
866 Affected Neoverse-N2 cores could ove <<
867 data at the base of the buffer (poin <<
868 the event of a WRAP event. <<
869 <<
870 Work around the issue by always maki <<
871 256 bytes before enabling the buffer <<
872 the buffer with ETM ignore packets u <<
873 <<
874 If unsure, say Y. <<
875 <<
876 config ARM64_WORKAROUND_TSB_FLUSH_FAILURE <<
877 bool 50 bool
878 <<
879 config ARM64_ERRATUM_2054223 <<
880 bool "Cortex-A710: 2054223: workaround <<
881 default y 51 default y
882 select ARM64_WORKAROUND_TSB_FLUSH_FAIL <<
883 help <<
884 Enable workaround for ARM Cortex-A71 <<
885 <<
886 Affected cores may fail to flush the <<
887 the PE is in trace prohibited state. <<
888 of the trace cached. <<
889 <<
890 Workaround is to issue two TSB conse <<
891 <<
892 If unsure, say Y. <<
893 <<
894 config ARM64_ERRATUM_2067961 <<
895 bool "Neoverse-N2: 2067961: workaround <<
896 default y <<
897 select ARM64_WORKAROUND_TSB_FLUSH_FAIL <<
898 help <<
899 Enable workaround for ARM Neoverse-N <<
900 <<
901 Affected cores may fail to flush the <<
902 the PE is in trace prohibited state. <<
903 of the trace cached. <<
904 52
905 Workaround is to issue two TSB conse !! 53 config GENERIC_CSUM
906 <<
907 If unsure, say Y. <<
908 <<
909 config ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANG <<
910 bool 54 bool
911 55
912 config ARM64_ERRATUM_2253138 !! 56 config TIME_LOW_RES
913 bool "Neoverse-N2: 2253138: workaround <<
914 depends on CORESIGHT_TRBE <<
915 default y <<
916 select ARM64_WORKAROUND_TRBE_WRITE_OUT <<
917 help <<
918 This option adds the workaround for <<
919 <<
920 Affected Neoverse-N2 cores might wri <<
921 for TRBE. Under some conditions, the <<
922 virtually addressed page following t <<
923 (i.e., the TRBLIMITR_EL1.LIMIT), ins <<
924 <<
925 Work around this in the driver by al <<
926 page beyond the TRBLIMITR_EL1.LIMIT, <<
927 <<
928 If unsure, say Y. <<
929 <<
930 config ARM64_ERRATUM_2224489 <<
931 bool "Cortex-A710/X2: 2224489: workaro <<
932 depends on CORESIGHT_TRBE <<
933 default y <<
934 select ARM64_WORKAROUND_TRBE_WRITE_OUT <<
935 help <<
936 This option adds the workaround for <<
937 <<
938 Affected Cortex-A710/X2 cores might <<
939 for TRBE. Under some conditions, the <<
940 virtually addressed page following t <<
941 (i.e., the TRBLIMITR_EL1.LIMIT), ins <<
942 <<
943 Work around this in the driver by al <<
944 page beyond the TRBLIMITR_EL1.LIMIT, <<
945 <<
946 If unsure, say Y. <<
947 <<
948 config ARM64_ERRATUM_2441009 <<
949 bool "Cortex-A510: Completion of affec <<
950 select ARM64_WORKAROUND_REPEAT_TLBI <<
951 help <<
952 This option adds a workaround for AR <<
953 <<
954 Under very rare circumstances, affec <<
955 may not handle a race between a brea <<
956 CPU, and another CPU accessing the s <<
957 store to a page that has been unmapp <<
958 <<
959 Work around this by adding the affec <<
960 TLB sequences to be done twice. <<
961 <<
962 If unsure, say N. <<
963 <<
964 config ARM64_ERRATUM_2064142 <<
965 bool "Cortex-A510: 2064142: workaround <<
966 depends on CORESIGHT_TRBE <<
967 default y <<
968 help <<
969 This option adds the workaround for <<
970 <<
971 Affected Cortex-A510 core might fail <<
972 TRBE has been disabled. Under some c <<
973 writes into TRBE registers TRBLIMITR <<
974 and TRBTRG_EL1 will be ignored and w <<
975 <<
976 Work around this in the driver by ex <<
977 is stopped and before performing a s <<
978 registers. <<
979 <<
980 If unsure, say Y. <<
981 <<
982 config ARM64_ERRATUM_2038923 <<
983 bool "Cortex-A510: 2038923: workaround <<
984 depends on CORESIGHT_TRBE <<
985 default y <<
986 help <<
987 This option adds the workaround for <<
988 <<
989 Affected Cortex-A510 core might caus <<
990 prohibited within the CPU. As a resu <<
991 might be corrupted. This happens aft <<
992 TRBLIMITR_EL1.E, followed by just a <<
993 execution changes from a context, in <<
994 isn't, or vice versa. In these menti <<
995 is prohibited is inconsistent betwee <<
996 the trace buffer state might be corr <<
997 <<
998 Work around this in the driver by pr <<
999 trace is prohibited or not based on <<
1000 change to TRBLIMITR_EL1.E with at l <<
1001 two ISB instructions if no ERET is <<
1002 <<
1003 If unsure, say Y. <<
1004 <<
1005 config ARM64_ERRATUM_1902691 <<
1006 bool "Cortex-A510: 1902691: workaroun <<
1007 depends on CORESIGHT_TRBE <<
1008 default y <<
1009 help <<
1010 This option adds the workaround for <<
1011 <<
1012 Affected Cortex-A510 core might cau <<
1013 into the memory. Effectively TRBE i <<
1014 trace data. <<
1015 <<
1016 Work around this problem in the dri <<
1017 affected cpus. The firmware must ha <<
1018 on such implementations. This will <<
1019 do this already. <<
1020 <<
1021 If unsure, say Y. <<
1022 <<
1023 config ARM64_ERRATUM_2457168 <<
1024 bool "Cortex-A510: 2457168: workaroun <<
1025 depends on ARM64_AMU_EXTN <<
1026 default y <<
1027 help <<
1028 This option adds the workaround for <<
1029 <<
1030 The AMU counter AMEVCNTR01 (constan <<
1031 as the system counter. On affected <<
1032 incorrectly giving a significantly <<
1033 <<
1034 Work around this problem by returni <<
1035 key locations that results in disab <<
1036 is the same to firmware disabling a <<
1037 <<
1038 If unsure, say Y. <<
1039 <<
1040 config ARM64_ERRATUM_2645198 <<
1041 bool "Cortex-A715: 2645198: Workaroun <<
1042 default y <<
1043 help <<
1044 This option adds the workaround for <<
1045 <<
1046 If a Cortex-A715 cpu sees a page ma <<
1047 to non-executable, it may corrupt t <<
1048 next instruction abort caused by pe <<
1049 <<
1050 Only user-space does executable to <<
1051 mprotect() system call. Workaround <<
1052 TLB invalidation, for all changes t <<
1053 <<
1054 If unsure, say Y. <<
1055 <<
1056 config ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LO <<
1057 bool 57 bool
1058 <<
1059 config ARM64_ERRATUM_2966298 <<
1060 bool "Cortex-A520: 2966298: workaroun <<
1061 select ARM64_WORKAROUND_SPECULATIVE_U <<
1062 default y <<
1063 help <<
1064 This option adds the workaround for <<
1065 <<
1066 On an affected Cortex-A520 core, a <<
1067 load might leak data from a privile <<
1068 <<
1069 Work around this problem by executi <<
1070 <<
1071 If unsure, say Y. <<
1072 <<
1073 config ARM64_ERRATUM_3117295 <<
1074 bool "Cortex-A510: 3117295: workaroun <<
1075 select ARM64_WORKAROUND_SPECULATIVE_U <<
1076 default y <<
1077 help <<
1078 This option adds the workaround for <<
1079 <<
1080 On an affected Cortex-A510 core, a <<
1081 load might leak data from a privile <<
1082 <<
1083 Work around this problem by executi <<
1084 <<
1085 If unsure, say Y. <<
1086 <<
1087 config ARM64_ERRATUM_3194386 <<
1088 bool "Cortex-*/Neoverse-*: workaround <<
1089 default y 58 default y
1090 help <<
1091 This option adds the workaround for <<
1092 <<
1093 * ARM Cortex-A76 erratum 3324349 <<
1094 * ARM Cortex-A77 erratum 3324348 <<
1095 * ARM Cortex-A78 erratum 3324344 <<
1096 * ARM Cortex-A78C erratum 3324346 <<
1097 * ARM Cortex-A78C erratum 3324347 <<
1098 * ARM Cortex-A710 erratam 3324338 <<
1099 * ARM Cortex-A715 errartum 3456084 <<
1100 * ARM Cortex-A720 erratum 3456091 <<
1101 * ARM Cortex-A725 erratum 3456106 <<
1102 * ARM Cortex-X1 erratum 3324344 <<
1103 * ARM Cortex-X1C erratum 3324346 <<
1104 * ARM Cortex-X2 erratum 3324338 <<
1105 * ARM Cortex-X3 erratum 3324335 <<
1106 * ARM Cortex-X4 erratum 3194386 <<
1107 * ARM Cortex-X925 erratum 3324334 <<
1108 * ARM Neoverse-N1 erratum 3324349 <<
1109 * ARM Neoverse N2 erratum 3324339 <<
1110 * ARM Neoverse-N3 erratum 3456111 <<
1111 * ARM Neoverse-V1 erratum 3324341 <<
1112 * ARM Neoverse V2 erratum 3324336 <<
1113 * ARM Neoverse-V3 erratum 3312417 <<
1114 <<
1115 On affected cores "MSR SSBS, #0" in <<
1116 subsequent speculative instructions <<
1117 speculative store bypassing. <<
1118 <<
1119 Work around this problem by placing <<
1120 Instruction Synchronization Barrier <<
1121 SSBS. The presence of the SSBS spec <<
1122 from hwcaps and EL0 reads of ID_AA6 <<
1123 will use the PR_SPEC_STORE_BYPASS p <<
1124 59
1125 If unsure, say Y. !! 60 config NO_IOPORT_MAP
1126 <<
1127 config CAVIUM_ERRATUM_22375 <<
1128 bool "Cavium erratum 22375, 24313" <<
1129 default y <<
1130 help <<
1131 Enable workaround for errata 22375 <<
1132 <<
1133 This implements two gicv3-its errat <<
1134 with a small impact affecting only <<
1135 <<
1136 erratum 22375: only alloc 8MB tab <<
1137 erratum 24313: ignore memory acce <<
1138 <<
1139 The fixes are in ITS initialization <<
1140 type and table size provided by the <<
1141 <<
1142 If unsure, say Y. <<
1143 <<
1144 config CAVIUM_ERRATUM_23144 <<
1145 bool "Cavium erratum 23144: ITS SYNC <<
1146 depends on NUMA <<
1147 default y <<
1148 help <<
1149 ITS SYNC command hang for cross nod <<
1150 <<
1151 If unsure, say Y. <<
1152 <<
1153 config CAVIUM_ERRATUM_23154 <<
1154 bool "Cavium errata 23154 and 38545: <<
1155 default y <<
1156 help <<
1157 The ThunderX GICv3 implementation r <<
1158 reading the IAR status to ensure da <<
1159 (access to icc_iar1_el1 is not sync <<
1160 <<
1161 It also suffers from erratum 38545 <<
1162 OcteonTX and OcteonTX2), resulting <<
1163 spuriously presented to the CPU int <<
1164 <<
1165 If unsure, say Y. <<
1166 <<
1167 config CAVIUM_ERRATUM_27456 <<
1168 bool "Cavium erratum 27456: Broadcast <<
1169 default y <<
1170 help <<
1171 On ThunderX T88 pass 1.x through 2. <<
1172 instructions may cause the icache t <<
1173 contains data for a non-current ASI <<
1174 invalidate the icache when changing <<
1175 <<
1176 If unsure, say Y. <<
1177 <<
1178 config CAVIUM_ERRATUM_30115 <<
1179 bool "Cavium erratum 30115: Guest may <<
1180 default y <<
1181 help <<
1182 On ThunderX T88 pass 1.x through 2. <<
1183 1.2, and T83 Pass 1.0, KVM guest ex <<
1184 interrupts in host. Trapping both G <<
1185 accesses sidesteps the issue. <<
1186 <<
1187 If unsure, say Y. <<
1188 <<
1189 config CAVIUM_TX2_ERRATUM_219 <<
1190 bool "Cavium ThunderX2 erratum 219: P <<
1191 default y <<
1192 help <<
1193 On Cavium ThunderX2, a load, store <<
1194 TTBR update and the corresponding c <<
1195 cause a spurious Data Abort to be d <<
1196 the CPU core. <<
1197 <<
1198 Work around the issue by avoiding t <<
1199 trapping KVM guest TTBRx_EL1 writes <<
1200 trap handler performs the correspon <<
1201 instruction and ensures context syn <<
1202 exception return. <<
1203 <<
1204 If unsure, say Y. <<
1205 <<
1206 config FUJITSU_ERRATUM_010001 <<
1207 bool "Fujitsu-A64FX erratum E#010001: <<
1208 default y <<
1209 help <<
1210 This option adds a workaround for F <<
1211 On some variants of the Fujitsu-A64 <<
1212 accesses may cause undefined fault <<
1213 This fault occurs under a specific <<
1214 load/store instruction performs an <<
1215 case-1 TTBR0_EL1 with TCR_EL1.NFD0 <<
1216 case-2 TTBR0_EL2 with TCR_EL2.NFD0 <<
1217 case-3 TTBR1_EL1 with TCR_EL1.NFD1 <<
1218 case-4 TTBR1_EL2 with TCR_EL2.NFD1 <<
1219 <<
1220 The workaround is to ensure these b <<
1221 The workaround only affects the Fuj <<
1222 <<
1223 If unsure, say Y. <<
1224 <<
1225 config HISILICON_ERRATUM_161600802 <<
1226 bool "Hip07 161600802: Erroneous redi <<
1227 default y <<
1228 help <<
1229 The HiSilicon Hip07 SoC uses the wr <<
1230 when issued ITS commands such as VM <<
1231 a 128kB offset to be applied to the <<
1232 <<
1233 If unsure, say Y. <<
1234 <<
1235 config QCOM_FALKOR_ERRATUM_1003 <<
1236 bool "Falkor E1003: Incorrect transla <<
1237 default y <<
1238 help <<
1239 On Falkor v1, an incorrect ASID may <<
1240 and BADDR are changed together in T <<
1241 in TTBR1_EL1, this situation only o <<
1242 then only for entries in the walk c <<
1243 is unchanged. Work around the errat <<
1244 entries for the trampoline before e <<
1245 <<
1246 config QCOM_FALKOR_ERRATUM_1009 <<
1247 bool "Falkor E1009: Prematurely compl <<
1248 default y <<
1249 select ARM64_WORKAROUND_REPEAT_TLBI <<
1250 help <<
1251 On Falkor v1, the CPU may premature <<
1252 TLBI xxIS invalidate maintenance op <<
1253 one more time to fix the issue. <<
1254 <<
1255 If unsure, say Y. <<
1256 <<
1257 config QCOM_QDF2400_ERRATUM_0065 <<
1258 bool "QDF2400 E0065: Incorrect GITS_T <<
1259 default y <<
1260 help <<
1261 On Qualcomm Datacenter Technologies <<
1262 ITE size incorrectly. The GITS_TYPE <<
1263 been indicated as 16Bytes (0xf), no <<
1264 <<
1265 If unsure, say Y. <<
1266 <<
1267 config QCOM_FALKOR_ERRATUM_E1041 <<
1268 bool "Falkor E1041: Speculative instr <<
1269 default y <<
1270 help <<
1271 Falkor CPU may speculatively fetch <<
1272 memory location when MMU translatio <<
1273 to SCTLR_ELn[M]=0. Prefix an ISB in <<
1274 <<
1275 If unsure, say Y. <<
1276 <<
1277 config NVIDIA_CARMEL_CNP_ERRATUM <<
1278 bool "NVIDIA Carmel CNP: CNP on Carme <<
1279 default y <<
1280 help <<
1281 If CNP is enabled on Carmel cores, <<
1282 invalidate shared TLB entries insta <<
1283 on standard ARM cores. <<
1284 <<
1285 If unsure, say Y. <<
1286 <<
1287 config ROCKCHIP_ERRATUM_3588001 <<
1288 bool "Rockchip 3588001: GIC600 can no <<
1289 default y <<
1290 help <<
1291 The Rockchip RK3588 GIC600 SoC inte <<
1292 This means, that its sharability fe <<
1293 is supported by the IP itself. <<
1294 <<
1295 If unsure, say Y. <<
1296 <<
1297 config SOCIONEXT_SYNQUACER_PREITS <<
1298 bool "Socionext Synquacer: Workaround <<
1299 default y <<
1300 help <<
1301 Socionext Synquacer SoCs implement <<
1302 MSI doorbell writes with non-zero v <<
1303 <<
1304 If unsure, say Y. <<
1305 <<
1306 endmenu # "ARM errata workarounds via the alt <<
1307 <<
1308 choice <<
1309 prompt "Page size" <<
1310 default ARM64_4K_PAGES <<
1311 help <<
1312 Page size (translation granule) con <<
1313 <<
1314 config ARM64_4K_PAGES <<
1315 bool "4KB" <<
1316 select HAVE_PAGE_SIZE_4KB <<
1317 help <<
1318 This feature enables 4KB pages supp <<
1319 <<
1320 config ARM64_16K_PAGES <<
1321 bool "16KB" <<
1322 select HAVE_PAGE_SIZE_16KB <<
1323 help <<
1324 The system will use 16KB pages supp <<
1325 requires applications compiled with <<
1326 aligned segments. <<
1327 <<
1328 config ARM64_64K_PAGES <<
1329 bool "64KB" <<
1330 select HAVE_PAGE_SIZE_64KB <<
1331 help <<
1332 This feature enables 64KB pages sup <<
1333 allowing only two levels of page ta <<
1334 look-up. AArch32 emulation requires <<
1335 with 64K aligned segments. <<
1336 <<
1337 endchoice <<
1338 <<
1339 choice <<
1340 prompt "Virtual address space size" <<
1341 default ARM64_VA_BITS_52 <<
1342 help <<
1343 Allows choosing one of multiple pos <<
1344 space sizes. The level of translati <<
1345 a combination of page size and virt <<
1346 <<
1347 config ARM64_VA_BITS_36 <<
1348 bool "36-bit" if EXPERT <<
1349 depends on PAGE_SIZE_16KB <<
1350 <<
1351 config ARM64_VA_BITS_39 <<
1352 bool "39-bit" <<
1353 depends on PAGE_SIZE_4KB <<
1354 <<
1355 config ARM64_VA_BITS_42 <<
1356 bool "42-bit" <<
1357 depends on PAGE_SIZE_64KB <<
1358 <<
1359 config ARM64_VA_BITS_47 <<
1360 bool "47-bit" <<
1361 depends on PAGE_SIZE_16KB <<
1362 <<
1363 config ARM64_VA_BITS_48 <<
1364 bool "48-bit" <<
1365 <<
1366 config ARM64_VA_BITS_52 <<
1367 bool "52-bit" <<
1368 depends on ARM64_PAN || !ARM64_SW_TTB <<
1369 help <<
1370 Enable 52-bit virtual addressing fo <<
1371 requested via a hint to mmap(). The <<
1372 virtual addresses for its own mappi <<
1373 this feature is available, otherwis <<
1374 <<
1375 NOTE: Enabling 52-bit virtual addre <<
1376 ARMv8.3 Pointer Authentication will <<
1377 reduced from 7 bits to 3 bits, whic <<
1378 impact on its susceptibility to bru <<
1379 <<
1380 If unsure, select 48-bit virtual ad <<
1381 <<
1382 endchoice <<
1383 <<
1384 config ARM64_FORCE_52BIT <<
1385 bool "Force 52-bit virtual addresses <<
1386 depends on ARM64_VA_BITS_52 && EXPERT <<
1387 help <<
1388 For systems with 52-bit userspace V <<
1389 to maintain compatibility with olde <<
1390 unless a hint is supplied to mmap. <<
1391 <<
1392 This configuration option disables <<
1393 forces all userspace addresses to b <<
1394 should only enable this configurati <<
1395 memory management code. If unsure s <<
1396 <<
1397 config ARM64_VA_BITS <<
1398 int <<
1399 default 36 if ARM64_VA_BITS_36 <<
1400 default 39 if ARM64_VA_BITS_39 <<
1401 default 42 if ARM64_VA_BITS_42 <<
1402 default 47 if ARM64_VA_BITS_47 <<
1403 default 48 if ARM64_VA_BITS_48 <<
1404 default 52 if ARM64_VA_BITS_52 <<
1405 <<
1406 choice <<
1407 prompt "Physical address space size" <<
1408 default ARM64_PA_BITS_48 <<
1409 help <<
1410 Choose the maximum physical address <<
1411 support. <<
1412 <<
1413 config ARM64_PA_BITS_48 <<
1414 bool "48-bit" <<
1415 depends on ARM64_64K_PAGES || !ARM64_ <<
1416 <<
1417 config ARM64_PA_BITS_52 <<
1418 bool "52-bit" <<
1419 depends on ARM64_64K_PAGES || ARM64_V <<
1420 depends on ARM64_PAN || !ARM64_SW_TTB <<
1421 help <<
1422 Enable support for a 52-bit physica <<
1423 part of the ARMv8.2-LPA extension. <<
1424 <<
1425 With this enabled, the kernel will <<
1426 do not support ARMv8.2-LPA, but wit <<
1427 minor performance overhead). <<
1428 <<
1429 endchoice <<
1430 <<
1431 config ARM64_PA_BITS <<
1432 int <<
1433 default 48 if ARM64_PA_BITS_48 <<
1434 default 52 if ARM64_PA_BITS_52 <<
1435 <<
1436 config ARM64_LPA2 <<
1437 def_bool y <<
1438 depends on ARM64_PA_BITS_52 && !ARM64 <<
1439 <<
1440 choice <<
1441 prompt "Endianness" <<
1442 default CPU_LITTLE_ENDIAN <<
1443 help <<
1444 Select the endianness of data acces <<
1445 applications will need to be compil <<
1446 that is selected here. <<
1447 <<
1448 config CPU_BIG_ENDIAN <<
1449 bool "Build big-endian kernel" <<
1450 # https://github.com/llvm/llvm-projec <<
1451 depends on AS_IS_GNU || AS_VERSION >= <<
1452 help <<
1453 Say Y if you plan on running a kern <<
1454 <<
1455 config CPU_LITTLE_ENDIAN <<
1456 bool "Build little-endian kernel" <<
1457 help <<
1458 Say Y if you plan on running a kern <<
1459 This is usually the case for distri <<
1460 <<
1461 endchoice <<
1462 <<
1463 config SCHED_MC <<
1464 bool "Multi-core scheduler support" <<
1465 help <<
1466 Multi-core scheduler support improv <<
1467 making when dealing with multi-core <<
1468 increased overhead in some places. <<
1469 <<
1470 config SCHED_CLUSTER <<
1471 bool "Cluster scheduler support" <<
1472 help <<
1473 Cluster scheduler support improves <<
1474 making when dealing with machines t <<
1475 Cluster usually means a couple of C <<
1476 by sharing mid-level caches, last-l <<
1477 busses. <<
1478 <<
1479 config SCHED_SMT <<
1480 bool "SMT scheduler support" <<
1481 help <<
1482 Improves the CPU scheduler's decisi <<
1483 MultiThreading at a cost of slightl <<
1484 places. If unsure say N here. <<
1485 <<
1486 config NR_CPUS <<
1487 int "Maximum number of CPUs (2-4096)" <<
1488 range 2 4096 <<
1489 default "512" <<
1490 <<
1491 config HOTPLUG_CPU <<
1492 bool "Support for hot-pluggable CPUs" <<
1493 select GENERIC_IRQ_MIGRATION <<
1494 help <<
1495 Say Y here to experiment with turni <<
1496 can be controlled through /sys/devi <<
1497 <<
1498 # Common NUMA Features <<
1499 config NUMA <<
1500 bool "NUMA Memory Allocation and Sche <<
1501 select GENERIC_ARCH_NUMA <<
1502 select OF_NUMA <<
1503 select HAVE_SETUP_PER_CPU_AREA <<
1504 select NEED_PER_CPU_EMBED_FIRST_CHUNK <<
1505 select NEED_PER_CPU_PAGE_FIRST_CHUNK <<
1506 select USE_PERCPU_NUMA_NODE_ID <<
1507 help <<
1508 Enable NUMA (Non-Uniform Memory Acc <<
1509 <<
1510 The kernel will try to allocate mem <<
1511 local memory of the CPU and add som <<
1512 NUMA awareness to the kernel. <<
1513 <<
1514 config NODES_SHIFT <<
1515 int "Maximum NUMA Nodes (as a power o <<
1516 range 1 10 <<
1517 default "4" <<
1518 depends on NUMA <<
1519 help <<
1520 Specify the maximum number of NUMA <<
1521 system. Increases memory reserved <<
1522 <<
1523 source "kernel/Kconfig.hz" <<
1524 <<
1525 config ARCH_SPARSEMEM_ENABLE <<
1526 def_bool y <<
1527 select SPARSEMEM_VMEMMAP_ENABLE <<
1528 select SPARSEMEM_VMEMMAP <<
1529 <<
1530 config HW_PERF_EVENTS <<
1531 def_bool y <<
1532 depends on ARM_PMU <<
1533 <<
1534 # Supported by clang >= 7.0 or GCC >= 12.0.0 <<
1535 config CC_HAVE_SHADOW_CALL_STACK <<
1536 def_bool $(cc-option, -fsanitize=shad <<
1537 <<
1538 config PARAVIRT <<
1539 bool "Enable paravirtualization code" <<
1540 help <<
1541 This changes the kernel so it can m <<
1542 under a hypervisor, potentially imp <<
1543 over full virtualization. <<
1544 <<
1545 config PARAVIRT_TIME_ACCOUNTING <<
1546 bool "Paravirtual steal time accounti <<
1547 select PARAVIRT <<
1548 help <<
1549 Select this option to enable fine g <<
1550 accounting. Time spent executing ot <<
1551 the current vCPU is discounted from <<
1552 that, there can be a small performa <<
1553 <<
1554 If in doubt, say N here. <<
1555 <<
1556 config ARCH_SUPPORTS_KEXEC <<
1557 def_bool PM_SLEEP_SMP <<
1558 <<
1559 config ARCH_SUPPORTS_KEXEC_FILE <<
1560 def_bool y <<
1561 <<
1562 config ARCH_SELECTS_KEXEC_FILE <<
1563 def_bool y <<
1564 depends on KEXEC_FILE <<
1565 select HAVE_IMA_KEXEC if IMA <<
1566 <<
1567 config ARCH_SUPPORTS_KEXEC_SIG <<
1568 def_bool y <<
1569 <<
1570 config ARCH_SUPPORTS_KEXEC_IMAGE_VERIFY_SIG <<
1571 def_bool y <<
1572 <<
1573 config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG <<
1574 def_bool y <<
1575 <<
1576 config ARCH_SUPPORTS_CRASH_DUMP <<
1577 def_bool y <<
1578 <<
1579 config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATI <<
1580 def_bool CRASH_RESERVE <<
1581 <<
1582 config TRANS_TABLE <<
1583 def_bool y <<
1584 depends on HIBERNATION || KEXEC_CORE <<
1585 <<
1586 config XEN_DOM0 <<
1587 def_bool y 61 def_bool y
1588 depends on XEN <<
1589 <<
1590 config XEN <<
1591 bool "Xen guest support on ARM64" <<
1592 depends on ARM64 && OF <<
1593 select SWIOTLB_XEN <<
1594 select PARAVIRT <<
1595 help <<
1596 Say Y if you want to run Linux in a <<
1597 <<
1598 # include/linux/mmzone.h requires the followi <<
1599 # <<
1600 # MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SI <<
1601 # <<
1602 # so the maximum value of MAX_PAGE_ORDER is S <<
1603 # <<
1604 # | SECTION_SIZE_BITS | PAGE_SHIFT | m <<
1605 # ----+-------------------+--------------+--- <<
1606 # 4K | 27 | 12 | <<
1607 # 16K | 27 | 14 | <<
1608 # 64K | 29 | 16 | <<
1609 config ARCH_FORCE_MAX_ORDER <<
1610 int <<
1611 default "13" if ARM64_64K_PAGES <<
1612 default "11" if ARM64_16K_PAGES <<
1613 default "10" <<
1614 help <<
1615 The kernel page allocator limits th <<
1616 contiguous allocations. The limit i <<
1617 defines the maximal power of two of <<
1618 allocated as a single contiguous bl <<
1619 overriding the default setting when <<
1620 large blocks of physically contiguo <<
1621 <<
1622 The maximal size of allocation cann <<
1623 section, so the value of MAX_PAGE_O <<
1624 <<
1625 MAX_PAGE_ORDER + PAGE_SHIFT <= SE <<
1626 <<
1627 Don't change if unsure. <<
1628 <<
1629 config UNMAP_KERNEL_AT_EL0 <<
1630 bool "Unmap kernel when running in us <<
1631 default y <<
1632 help <<
1633 Speculation attacks against some hi <<
1634 be used to bypass MMU permission ch <<
1635 userspace. This can be defended aga <<
1636 when running in userspace, mapping <<
1637 via a trampoline page in the vector <<
1638 <<
1639 If unsure, say Y. <<
1640 <<
1641 config MITIGATE_SPECTRE_BRANCH_HISTORY <<
1642 bool "Mitigate Spectre style attacks <<
1643 default y <<
1644 help <<
1645 Speculation attacks against some hi <<
1646 make use of branch history to influ <<
1647 When taking an exception from user- <<
1648 or a firmware call overwrites the b <<
1649 <<
1650 config RODATA_FULL_DEFAULT_ENABLED <<
1651 bool "Apply r/o permissions of VM are <<
1652 default y <<
1653 help <<
1654 Apply read-only attributes of VM ar <<
1655 the backing pages as well. This pre <<
1656 from being modified (inadvertently <<
1657 mapping of the same memory page. Th <<
1658 be turned off at runtime by passing <<
1659 with rodata=full if this option is <<
1660 <<
1661 This requires the linear region to <<
1662 which may adversely affect performa <<
1663 <<
1664 config ARM64_SW_TTBR0_PAN <<
1665 bool "Emulate Privileged Access Never <<
1666 depends on !KCSAN <<
1667 help <<
1668 Enabling this option prevents the k <<
1669 user-space memory directly by point <<
1670 zeroed area and reserved ASID. The <<
1671 restore the valid TTBR0_EL1 tempora <<
1672 <<
1673 config ARM64_TAGGED_ADDR_ABI <<
1674 bool "Enable the tagged user addresse <<
1675 default y <<
1676 help <<
1677 When this option is enabled, user a <<
1678 relaxed ABI via prctl() allowing ta <<
1679 to system calls as pointer argument <<
1680 Documentation/arch/arm64/tagged-add <<
1681 <<
1682 menuconfig COMPAT <<
1683 bool "Kernel support for 32-bit EL0" <<
1684 depends on ARM64_4K_PAGES || EXPERT <<
1685 select HAVE_UID16 <<
1686 select OLD_SIGSUSPEND3 <<
1687 select COMPAT_OLD_SIGACTION <<
1688 help <<
1689 This option enables support for a 3 <<
1690 kernel at EL1. AArch32-specific com <<
1691 the user helper functions, VFP supp <<
1692 handled appropriately by the kernel <<
1693 <<
1694 If you use a page size other than 4 <<
1695 that you will only be able to execu <<
1696 with page size aligned segments. <<
1697 <<
1698 If you want to execute 32-bit users <<
1699 <<
1700 if COMPAT <<
1701 62
1702 config KUSER_HELPERS !! 63 config NO_DMA
1703 bool "Enable kuser helpers page for 3 !! 64 def_bool (MMU && SUN3) || (!MMU && !COLDFIRE)
1704 default y <<
1705 help <<
1706 Warning: disabling this option may <<
1707 <<
1708 Provide kuser helpers to compat tas <<
1709 helper code to userspace in read on <<
1710 to allow userspace to be independen <<
1711 the system. This permits binaries t <<
1712 to ARMv8 without modification. <<
1713 <<
1714 See Documentation/arch/arm/kernel_u <<
1715 <<
1716 However, the fixed address nature o <<
1717 by ROP (return orientated programmi <<
1718 exploits. <<
1719 <<
1720 If all of the binaries and librarie <<
1721 are built specifically for your pla <<
1722 these helpers, then you can turn th <<
1723 such exploits. However, in that cas <<
1724 relying on those helpers is run, it <<
1725 <<
1726 Say N here only if you are absolute <<
1727 need these helpers; otherwise, the <<
1728 <<
1729 config COMPAT_VDSO <<
1730 bool "Enable vDSO for 32-bit applicat <<
1731 depends on !CPU_BIG_ENDIAN <<
1732 depends on (CC_IS_CLANG && LD_IS_LLD) <<
1733 select GENERIC_COMPAT_VDSO <<
1734 default y <<
1735 help <<
1736 Place in the process address space <<
1737 ELF shared object providing fast im <<
1738 and clock_gettime. <<
1739 <<
1740 You must have a 32-bit build of gli <<
1741 to seamlessly take advantage of thi <<
1742 <<
1743 config THUMB2_COMPAT_VDSO <<
1744 bool "Compile the 32-bit vDSO for Thu <<
1745 depends on COMPAT_VDSO <<
1746 default y <<
1747 help <<
1748 Compile the compat vDSO with '-mthu <<
1749 otherwise with '-marm'. <<
1750 <<
1751 config COMPAT_ALIGNMENT_FIXUPS <<
1752 bool "Fix up misaligned multi-word lo <<
1753 <<
1754 menuconfig ARMV8_DEPRECATED <<
1755 bool "Emulate deprecated/obsolete ARM <<
1756 depends on SYSCTL <<
1757 help <<
1758 Legacy software support may require <<
1759 that have been deprecated or obsole <<
1760 <<
1761 Enable this config to enable select <<
1762 features. <<
1763 <<
1764 If unsure, say Y <<
1765 <<
1766 if ARMV8_DEPRECATED <<
1767 <<
1768 config SWP_EMULATION <<
1769 bool "Emulate SWP/SWPB instructions" <<
1770 help <<
1771 ARMv8 obsoletes the use of A32 SWP/ <<
1772 they are always undefined. Say Y he <<
1773 emulation of these instructions for <<
1774 This feature can be controlled at r <<
1775 sysctl which is disabled by default <<
1776 <<
1777 In some older versions of glibc [<= <<
1778 trylock() operations with the assum <<
1779 be preempted. This invalid assumpti <<
1780 with SWP emulation enabled, leading <<
1781 application. <<
1782 <<
1783 NOTE: when accessing uncached share <<
1784 on an external transaction monitori <<
1785 monitor to maintain update atomicit <<
1786 implement a global monitor, this op <<
1787 perform SWP operations to uncached <<
1788 <<
1789 If unsure, say Y <<
1790 <<
1791 config CP15_BARRIER_EMULATION <<
1792 bool "Emulate CP15 Barrier instructio <<
1793 help <<
1794 The CP15 barrier instructions - CP1 <<
1795 CP15DMB - are deprecated in ARMv8 ( <<
1796 strongly recommended to use the ISB <<
1797 instructions instead. <<
1798 <<
1799 Say Y here to enable software emula <<
1800 instructions for AArch32 userspace <<
1801 enabled, CP15 barrier usage is trac <<
1802 identify software that needs updati <<
1803 controlled at runtime with the abi. <<
1804 <<
1805 If unsure, say Y <<
1806 <<
1807 config SETEND_EMULATION <<
1808 bool "Emulate SETEND instruction" <<
1809 help <<
1810 The SETEND instruction alters the d <<
1811 AArch32 EL0, and is deprecated in A <<
1812 <<
1813 Say Y here to enable software emula <<
1814 for AArch32 userspace code. This fe <<
1815 at runtime with the abi.setend sysc <<
1816 <<
1817 Note: All the cpus on the system mu <<
1818 for this feature to be enabled. If <<
1819 endian - is hotplugged in after thi <<
1820 be unexpected results in the applic <<
1821 <<
1822 If unsure, say Y <<
1823 endif # ARMV8_DEPRECATED <<
1824 <<
1825 endif # COMPAT <<
1826 <<
1827 menu "ARMv8.1 architectural features" <<
1828 <<
1829 config ARM64_HW_AFDBM <<
1830 bool "Support for hardware updates of <<
1831 default y <<
1832 help <<
1833 The ARMv8.1 architecture extensions <<
1834 hardware updates of the access and <<
1835 table entries. When enabled in TCR_ <<
1836 capable processors, accesses to pag <<
1837 set this bit instead of raising an <<
1838 Similarly, writes to read-only page <<
1839 clear the read-only bit (AP[2]) ins <<
1840 permission fault. <<
1841 <<
1842 Kernels built with this configurati <<
1843 to work on pre-ARMv8.1 hardware and <<
1844 minimal. If unsure, say Y. <<
1845 <<
1846 config ARM64_PAN <<
1847 bool "Enable support for Privileged A <<
1848 default y <<
1849 help <<
1850 Privileged Access Never (PAN; part <<
1851 prevents the kernel or hypervisor f <<
1852 memory directly. <<
1853 <<
1854 Choosing this option will cause any <<
1855 copy_to_user et al) memory access t <<
1856 <<
1857 The feature is detected at runtime, <<
1858 instruction if the cpu does not imp <<
1859 65
1860 config AS_HAS_LSE_ATOMICS !! 66 config ZONE_DMA
1861 def_bool $(as-instr,.arch_extension l <<
1862 <<
1863 config ARM64_LSE_ATOMICS <<
1864 bool 67 bool
1865 default ARM64_USE_LSE_ATOMICS <<
1866 depends on AS_HAS_LSE_ATOMICS <<
1867 <<
1868 config ARM64_USE_LSE_ATOMICS <<
1869 bool "Atomic instructions" <<
1870 default y 68 default y
1871 help <<
1872 As part of the Large System Extensi <<
1873 atomic instructions that are design <<
1874 very large systems. <<
1875 <<
1876 Say Y here to make use of these ins <<
1877 atomic routines. This incurs a smal <<
1878 not support these instructions and <<
1879 built with binutils >= 2.25 in orde <<
1880 to be used. <<
1881 <<
1882 endmenu # "ARMv8.1 architectural features" <<
1883 <<
1884 menu "ARMv8.2 architectural features" <<
1885 <<
1886 config AS_HAS_ARMV8_2 <<
1887 def_bool $(cc-option,-Wa$(comma)-marc <<
1888 <<
1889 config AS_HAS_SHA3 <<
1890 def_bool $(as-instr,.arch armv8.2-a+s <<
1891 <<
1892 config ARM64_PMEM <<
1893 bool "Enable support for persistent m <<
1894 select ARCH_HAS_PMEM_API <<
1895 select ARCH_HAS_UACCESS_FLUSHCACHE <<
1896 help <<
1897 Say Y to enable support for the per <<
1898 ARMv8.2 DCPoP feature. <<
1899 <<
1900 The feature is detected at runtime, <<
1901 operations if DC CVAP is not suppor <<
1902 DC CVAP itself if the system does n <<
1903 <<
1904 config ARM64_RAS_EXTN <<
1905 bool "Enable support for RAS CPU Exte <<
1906 default y <<
1907 help <<
1908 CPUs that support the Reliability, <<
1909 (RAS) Extensions, part of ARMv8.2 a <<
1910 errors, classify them and report th <<
1911 <<
1912 On CPUs with these extensions syste <<
1913 barriers to determine if faults are <<
1914 classification from a new set of re <<
1915 <<
1916 Selecting this feature will allow t <<
1917 and access the new registers if the <<
1918 Platform RAS features may additiona <<
1919 <<
1920 config ARM64_CNP <<
1921 bool "Enable support for Common Not P <<
1922 default y <<
1923 depends on ARM64_PAN || !ARM64_SW_TTB <<
1924 help <<
1925 Common Not Private (CNP) allows tra <<
1926 be shared between different PEs in <<
1927 domain, so the hardware can use thi <<
1928 caching of such entries in the TLB. <<
1929 <<
1930 Selecting this option allows the CN <<
1931 at runtime, and does not affect PEs <<
1932 this feature. <<
1933 <<
1934 endmenu # "ARMv8.2 architectural features" <<
1935 <<
1936 menu "ARMv8.3 architectural features" <<
1937 <<
1938 config ARM64_PTR_AUTH <<
1939 bool "Enable support for pointer auth <<
1940 default y <<
1941 help <<
1942 Pointer authentication (part of the <<
1943 instructions for signing and authen <<
1944 keys, which can be used to mitigate <<
1945 and other attacks. <<
1946 <<
1947 This option enables these instructi <<
1948 Choosing this option will cause the <<
1949 for each process at exec() time, wi <<
1950 context-switched along with the pro <<
1951 <<
1952 The feature is detected at runtime. <<
1953 hardware it will not be advertised <<
1954 be enabled. <<
1955 <<
1956 If the feature is present on the bo <<
1957 the late CPU will be parked. Also, <<
1958 address auth and the late CPU has t <<
1959 but with the feature disabled. On s <<
1960 not be selected. <<
1961 69
1962 config ARM64_PTR_AUTH_KERNEL !! 70 config HZ
1963 bool "Use pointer authentication for !! 71 int
1964 default y !! 72 default 1000 if CLEOPATRA
1965 depends on ARM64_PTR_AUTH !! 73 default 100
1966 depends on (CC_HAS_SIGN_RETURN_ADDRES <<
1967 # Modern compilers insert a .note.gnu <<
1968 # which is only understood by binutil <<
1969 depends on LD_IS_LLD || LD_VERSION >= <<
1970 depends on !CC_IS_CLANG || AS_HAS_CFI <<
1971 depends on (!FUNCTION_GRAPH_TRACER || <<
1972 help <<
1973 If the compiler supports the -mbran <<
1974 -msign-return-address flag (e.g. GC <<
1975 will cause the kernel itself to be <<
1976 protection. In this case, and if th <<
1977 support pointer authentication, the <<
1978 disabled with minimal loss of prote <<
1979 <<
1980 This feature works with FUNCTION_GR <<
1981 DYNAMIC_FTRACE_WITH_ARGS is enabled <<
1982 <<
1983 config CC_HAS_BRANCH_PROT_PAC_RET <<
1984 # GCC 9 or later, clang 8 or later <<
1985 def_bool $(cc-option,-mbranch-protect <<
1986 <<
1987 config CC_HAS_SIGN_RETURN_ADDRESS <<
1988 # GCC 7, 8 <<
1989 def_bool $(cc-option,-msign-return-ad <<
1990 <<
1991 config AS_HAS_ARMV8_3 <<
1992 def_bool $(cc-option,-Wa$(comma)-marc <<
1993 <<
1994 config AS_HAS_CFI_NEGATE_RA_STATE <<
1995 def_bool $(as-instr,.cfi_startproc\n. <<
1996 <<
1997 config AS_HAS_LDAPR <<
1998 def_bool $(as-instr,.arch_extension r <<
1999 <<
2000 endmenu # "ARMv8.3 architectural features" <<
2001 <<
2002 menu "ARMv8.4 architectural features" <<
2003 <<
2004 config ARM64_AMU_EXTN <<
2005 bool "Enable support for the Activity <<
2006 default y <<
2007 help <<
2008 The activity monitors extension is <<
2009 by the ARMv8.4 CPU architecture. Th <<
2010 of the activity monitors architectu <<
2011 <<
2012 To enable the use of this extension <<
2013 <<
2014 Note that for architectural reasons <<
2015 support when running on CPUs that p <<
2016 extension. The required support is <<
2017 * Version 1.5 and later of the AR <<
2018 <<
2019 For kernels that have this configur <<
2020 firmware, you may need to say N her <<
2021 Otherwise you may experience firmwa <<
2022 accessing the counter registers. Ev <<
2023 symptoms, the values returned by th <<
2024 correctly reflect reality. Most com <<
2025 indicating that the counter is not <<
2026 <<
2027 config AS_HAS_ARMV8_4 <<
2028 def_bool $(cc-option,-Wa$(comma)-marc <<
2029 <<
2030 config ARM64_TLB_RANGE <<
2031 bool "Enable support for tlbi range f <<
2032 default y <<
2033 depends on AS_HAS_ARMV8_4 <<
2034 help <<
2035 ARMv8.4-TLBI provides TLBI invalida <<
2036 range of input addresses. <<
2037 <<
2038 The feature introduces new assembly <<
2039 support when binutils >= 2.30. <<
2040 <<
2041 endmenu # "ARMv8.4 architectural features" <<
2042 <<
2043 menu "ARMv8.5 architectural features" <<
2044 <<
2045 config AS_HAS_ARMV8_5 <<
2046 def_bool $(cc-option,-Wa$(comma)-marc <<
2047 <<
2048 config ARM64_BTI <<
2049 bool "Branch Target Identification su <<
2050 default y <<
2051 help <<
2052 Branch Target Identification (part <<
2053 provides a mechanism to limit the s <<
2054 branch instructions such as BR or B <<
2055 <<
2056 To make use of BTI on CPUs that sup <<
2057 <<
2058 BTI is intended to provide compleme <<
2059 flow integrity protection mechanism <<
2060 authentication mechanism provided a <<
2061 For this reason, it does not make s <<
2062 also enabling support for pointer a <<
2063 enabling this option you should als <<
2064 <<
2065 Userspace binaries must also be spe <<
2066 this mechanism. If you say N here <<
2067 BTI, such binaries can still run, b <<
2068 enforcement of branch destinations. <<
2069 <<
2070 config ARM64_BTI_KERNEL <<
2071 bool "Use Branch Target Identificatio <<
2072 default y <<
2073 depends on ARM64_BTI <<
2074 depends on ARM64_PTR_AUTH_KERNEL <<
2075 depends on CC_HAS_BRANCH_PROT_PAC_RET <<
2076 # https://gcc.gnu.org/bugzilla/show_b <<
2077 depends on !CC_IS_GCC || GCC_VERSION <<
2078 # https://gcc.gnu.org/bugzilla/show_b <<
2079 depends on !CC_IS_GCC <<
2080 depends on (!FUNCTION_GRAPH_TRACER || <<
2081 help <<
2082 Build the kernel with Branch Target <<
2083 and enable enforcement of this for <<
2084 is enabled and the system supports <<
2085 modular code must have BTI enabled. <<
2086 <<
2087 config CC_HAS_BRANCH_PROT_PAC_RET_BTI <<
2088 # GCC 9 or later, clang 8 or later <<
2089 def_bool $(cc-option,-mbranch-protect <<
2090 <<
2091 config ARM64_E0PD <<
2092 bool "Enable support for E0PD" <<
2093 default y <<
2094 help <<
2095 E0PD (part of the ARMv8.5 extension <<
2096 that EL0 accesses made via TTBR1 al <<
2097 providing similar benefits to KASLR <<
2098 with lower overhead and without dis <<
2099 kernel memory such as SPE. <<
2100 <<
2101 This option enables E0PD for TTBR1 <<
2102 <<
2103 config ARM64_AS_HAS_MTE <<
2104 # Initial support for MTE went in bin <<
2105 # ".arch armv8.5-a+memtag" below. How <<
2106 # as a late addition to the final arc <<
2107 # is only supported in the newer 2.32 <<
2108 # versions, hence the extra "stgm" in <<
2109 def_bool $(as-instr,.arch armv8.5-a+m <<
2110 <<
2111 config ARM64_MTE <<
2112 bool "Memory Tagging Extension suppor <<
2113 default y <<
2114 depends on ARM64_AS_HAS_MTE && ARM64_ <<
2115 depends on AS_HAS_ARMV8_5 <<
2116 depends on AS_HAS_LSE_ATOMICS <<
2117 # Required for tag checking in the ua <<
2118 depends on ARM64_PAN <<
2119 select ARCH_HAS_SUBPAGE_FAULTS <<
2120 select ARCH_USES_HIGH_VMA_FLAGS <<
2121 select ARCH_USES_PG_ARCH_2 <<
2122 select ARCH_USES_PG_ARCH_3 <<
2123 help <<
2124 Memory Tagging (part of the ARMv8.5 <<
2125 architectural support for run-time, <<
2126 various classes of memory error to <<
2127 to eliminate vulnerabilities arisin <<
2128 languages. <<
2129 <<
2130 This option enables the support for <<
2131 Extension at EL0 (i.e. for userspac <<
2132 <<
2133 Selecting this option allows the fe <<
2134 runtime. Any secondary CPU not impl <<
2135 not be allowed a late bring-up. <<
2136 <<
2137 Userspace binaries that want to use <<
2138 explicitly opt in. The mechanism fo <<
2139 described in: <<
2140 74
2141 Documentation/arch/arm64/memory-tag !! 75 config PGTABLE_LEVELS
>> 76 default 2 if SUN3 || COLDFIRE
>> 77 default 3
2142 78
2143 endmenu # "ARMv8.5 architectural features" !! 79 source "init/Kconfig"
2144 80
2145 menu "ARMv8.7 architectural features" !! 81 source "kernel/Kconfig.freezer"
2146 82
2147 config ARM64_EPAN !! 83 config MMU
2148 bool "Enable support for Enhanced Pri !! 84 bool "MMU-based Paged Memory Management Support"
2149 default y 85 default y
2150 depends on ARM64_PAN <<
2151 help <<
2152 Enhanced Privileged Access Never (E <<
2153 Access Never to be used with Execut <<
2154 <<
2155 The feature is detected at runtime, <<
2156 if the cpu does not implement the f <<
2157 endmenu # "ARMv8.7 architectural features" <<
2158 <<
2159 menu "ARMv8.9 architectural features" <<
2160 <<
2161 config ARM64_POE <<
2162 prompt "Permission Overlay Extension" <<
2163 def_bool y <<
2164 select ARCH_USES_HIGH_VMA_FLAGS <<
2165 select ARCH_HAS_PKEYS <<
2166 help 86 help
2167 The Permission Overlay Extension is !! 87 Select if you want MMU-based virtualised addressing space
2168 Protection Keys. Memory Protection !! 88 support by paged memory management. If unsure, say 'Y'.
2169 enforcing page-based protections, b <<
2170 of the page tables when an applicat <<
2171 89
2172 For details, see Documentation/core !! 90 config MMU_MOTOROLA
2173 !! 91 bool
2174 If unsure, say y. <<
2175 <<
2176 config ARCH_PKEY_BITS <<
2177 int <<
2178 default 3 <<
2179 92
2180 endmenu # "ARMv8.9 architectural features" !! 93 config MMU_COLDFIRE
>> 94 bool
2181 95
2182 config ARM64_SVE !! 96 config MMU_SUN3
2183 bool "ARM Scalable Vector Extension s !! 97 bool
2184 default y !! 98 depends on MMU && !MMU_MOTOROLA && !MMU_COLDFIRE
2185 help <<
2186 The Scalable Vector Extension (SVE) <<
2187 execution state which complements a <<
2188 of the base architecture to support <<
2189 additional vectorisation opportunit <<
2190 <<
2191 To enable use of this extension on <<
2192 <<
2193 On CPUs that support the SVE2 exten <<
2194 those too. <<
2195 <<
2196 Note that for architectural reasons <<
2197 support when running on SVE capable <<
2198 is present in: <<
2199 <<
2200 * version 1.5 and later of the AR <<
2201 * the AArch64 boot wrapper since <<
2202 ("bootwrapper: SVE: Enable SVE <<
2203 <<
2204 For other firmware implementations, <<
2205 or vendor. <<
2206 <<
2207 If you need the kernel to boot on S <<
2208 firmware, you may need to say N her <<
2209 fixed. Otherwise, you may experien <<
2210 booting the kernel. If unsure and <<
2211 symptoms, you should assume that it <<
2212 99
2213 config ARM64_SME !! 100 config KEXEC
2214 bool "ARM Scalable Matrix Extension s !! 101 bool "kexec system call"
2215 default y !! 102 depends on M68KCLASSIC
2216 depends on ARM64_SVE !! 103 select KEXEC_CORE
2217 depends on BROKEN <<
2218 help <<
2219 The Scalable Matrix Extension (SME) <<
2220 execution state which utilises a su <<
2221 instruction set, together with the <<
2222 register state capable of holding t <<
2223 enable various matrix operations. <<
2224 <<
2225 config ARM64_PSEUDO_NMI <<
2226 bool "Support for NMI-like interrupts <<
2227 select ARM_GIC_V3 <<
2228 help 104 help
2229 Adds support for mimicking Non-Mask !! 105 kexec is a system call that implements the ability to shutdown your
2230 GIC interrupt priority. This suppor !! 106 current kernel, and to start another kernel. It is like a reboot
2231 ARM GIC. !! 107 but it is independent of the system firmware. And like a reboot
2232 !! 108 you can start any kernel with it, not just Linux.
2233 This high priority configuration fo <<
2234 explicitly enabled by setting the k <<
2235 "irqchip.gicv3_pseudo_nmi" to 1. <<
2236 <<
2237 If unsure, say N <<
2238 <<
2239 if ARM64_PSEUDO_NMI <<
2240 config ARM64_DEBUG_PRIORITY_MASKING <<
2241 bool "Debug interrupt priority maskin <<
2242 help <<
2243 This adds runtime checks to functio <<
2244 interrupts when using priority mask <<
2245 the validity of ICC_PMR_EL1 when ca <<
2246 <<
2247 If unsure, say N <<
2248 endif # ARM64_PSEUDO_NMI <<
2249 <<
2250 config RELOCATABLE <<
2251 bool "Build a relocatable kernel imag <<
2252 select ARCH_HAS_RELR <<
2253 default y <<
2254 help <<
2255 This builds the kernel as a Positio <<
2256 which retains all relocation metada <<
2257 kernel binary at runtime to a diffe <<
2258 address it was linked at. <<
2259 Since AArch64 uses the RELA relocat <<
2260 relocation pass at runtime even if <<
2261 same address it was linked at. <<
2262 <<
2263 config RANDOMIZE_BASE <<
2264 bool "Randomize the address of the ke <<
2265 select RELOCATABLE <<
2266 help <<
2267 Randomizes the virtual address at w <<
2268 loaded, as a security feature that <<
2269 relying on knowledge of the locatio <<
2270 <<
2271 It is the bootloader's job to provi <<
2272 random u64 value in /chosen/kaslr-s <<
2273 <<
2274 When booting via the UEFI stub, it <<
2275 EFI_RNG_PROTOCOL implementation (if <<
2276 to the kernel proper. In addition, <<
2277 location of the kernel Image as wel <<
2278 <<
2279 If unsure, say N. <<
2280 <<
2281 config RANDOMIZE_MODULE_REGION_FULL <<
2282 bool "Randomize the module region ove <<
2283 depends on RANDOMIZE_BASE <<
2284 default y <<
2285 help <<
2286 Randomizes the location of the modu <<
2287 covering the core kernel. This way, <<
2288 to leak information about the locat <<
2289 but it does imply that function cal <<
2290 kernel will need to be resolved via <<
2291 <<
2292 When this option is not set, the mo <<
2293 a limited range that contains the [ <<
2294 core kernel, so branch relocations <<
2295 the region is exhausted. In this pa <<
2296 exhaustion, modules might be able t <<
2297 109
2298 config CC_HAVE_STACKPROTECTOR_SYSREG !! 110 The name comes from the similarity to the exec system call.
2299 def_bool $(cc-option,-mstack-protecto <<
2300 111
2301 config STACKPROTECTOR_PER_TASK !! 112 It is an ongoing process to be certain the hardware in a machine
2302 def_bool y !! 113 is properly shutdown, so do not be surprised if this code does not
2303 depends on STACKPROTECTOR && CC_HAVE_ !! 114 initially work for you. As of this writing the exact hardware
>> 115 interface is strongly in flux, so no good recommendation can be
>> 116 made.
2304 117
2305 config UNWIND_PATCH_PAC_INTO_SCS !! 118 config BOOTINFO_PROC
2306 bool "Enable shadow call stack dynami !! 119 bool "Export bootinfo in procfs"
2307 # needs Clang with https://github.com !! 120 depends on KEXEC && M68KCLASSIC
2308 depends on CC_IS_CLANG && CLANG_VERSI <<
2309 depends on ARM64_PTR_AUTH_KERNEL && C <<
2310 depends on SHADOW_CALL_STACK <<
2311 select UNWIND_TABLES <<
2312 select DYNAMIC_SCS <<
2313 <<
2314 config ARM64_CONTPTE <<
2315 bool "Contiguous PTE mappings for use <<
2316 depends on TRANSPARENT_HUGEPAGE <<
2317 default y <<
2318 help 121 help
2319 When enabled, user mappings are con !! 122 Say Y to export the bootinfo used to boot the kernel in a
2320 bit, for any mappings that meet the !! 123 "bootinfo" file in procfs. This is useful with kexec.
2321 This reduces TLB pressure and impro <<
2322 124
2323 endmenu # "Kernel Features" !! 125 menu "Platform setup"
2324 126
2325 menu "Boot options" !! 127 source arch/m68k/Kconfig.cpu
2326 128
2327 config ARM64_ACPI_PARKING_PROTOCOL !! 129 source arch/m68k/Kconfig.machine
2328 bool "Enable support for the ARM64 AC <<
2329 depends on ACPI <<
2330 help <<
2331 Enable support for the ARM64 ACPI p <<
2332 the kernel will not allow booting t <<
2333 protocol even if the corresponding <<
2334 MADT table. <<
2335 <<
2336 config CMDLINE <<
2337 string "Default kernel command string <<
2338 default "" <<
2339 help <<
2340 Provide a set of default command-li <<
2341 entering them here. As a minimum, y <<
2342 root device (e.g. root=/dev/nfs). <<
2343 <<
2344 choice <<
2345 prompt "Kernel command line type" <<
2346 depends on CMDLINE != "" <<
2347 default CMDLINE_FROM_BOOTLOADER <<
2348 help <<
2349 Choose how the kernel will handle t <<
2350 command line string. <<
2351 130
2352 config CMDLINE_FROM_BOOTLOADER !! 131 source arch/m68k/Kconfig.bus
2353 bool "Use bootloader kernel arguments <<
2354 help <<
2355 Uses the command-line options passe <<
2356 the boot loader doesn't provide any <<
2357 string provided in CMDLINE will be <<
2358 132
2359 config CMDLINE_FORCE !! 133 endmenu
2360 bool "Always use the default kernel c <<
2361 help <<
2362 Always use the default kernel comma <<
2363 loader passes other arguments to th <<
2364 This is useful if you cannot or don <<
2365 command-line options your boot load <<
2366 134
2367 endchoice !! 135 menu "Kernel Features"
2368 136
2369 config EFI_STUB !! 137 if COLDFIRE
2370 bool !! 138 source "kernel/Kconfig.preempt"
>> 139 endif
2371 140
2372 config EFI !! 141 source "mm/Kconfig"
2373 bool "UEFI runtime support" <<
2374 depends on OF && !CPU_BIG_ENDIAN <<
2375 depends on KERNEL_MODE_NEON <<
2376 select ARCH_SUPPORTS_ACPI <<
2377 select LIBFDT <<
2378 select UCS2_STRING <<
2379 select EFI_PARAMS_FROM_FDT <<
2380 select EFI_RUNTIME_WRAPPERS <<
2381 select EFI_STUB <<
2382 select EFI_GENERIC_STUB <<
2383 imply IMA_SECURE_AND_OR_TRUSTED_BOOT <<
2384 default y <<
2385 help <<
2386 This option provides support for ru <<
2387 by UEFI firmware (such as non-volat <<
2388 clock, and platform reset). A UEFI <<
2389 allow the kernel to be booted as an <<
2390 is only useful on systems that have <<
2391 142
2392 config COMPRESSED_INSTALL !! 143 endmenu
2393 bool "Install compressed image by def <<
2394 help <<
2395 This makes the regular "make instal <<
2396 image we built, not the legacy unco <<
2397 144
2398 You can check that a compressed ima !! 145 menu "Executable file formats"
2399 "make zinstall" first, and verifyin <<
2400 in your environment before making " <<
2401 you. <<
2402 <<
2403 config DMI <<
2404 bool "Enable support for SMBIOS (DMI) <<
2405 depends on EFI <<
2406 default y <<
2407 help <<
2408 This enables SMBIOS/DMI feature for <<
2409 146
2410 This option is only useful on syste !! 147 source "fs/Kconfig.binfmt"
2411 However, even with this option, the <<
2412 continue to boot on existing non-UE <<
2413 148
2414 endmenu # "Boot options" !! 149 endmenu
2415 150
>> 151 if !MMU
2416 menu "Power management options" 152 menu "Power management options"
2417 153
2418 source "kernel/power/Kconfig" !! 154 config PM
2419 !! 155 bool "Power Management support"
2420 config ARCH_HIBERNATION_POSSIBLE !! 156 help
2421 def_bool y !! 157 Support processor power management modes
2422 depends on CPU_PM <<
2423 <<
2424 config ARCH_HIBERNATION_HEADER <<
2425 def_bool y <<
2426 depends on HIBERNATION <<
2427 158
2428 config ARCH_SUSPEND_POSSIBLE !! 159 endmenu
2429 def_bool y !! 160 endif
2430 161
2431 endmenu # "Power management options" !! 162 source "net/Kconfig"
2432 163
2433 menu "CPU Power Management" !! 164 source "drivers/Kconfig"
2434 165
2435 source "drivers/cpuidle/Kconfig" !! 166 source "arch/m68k/Kconfig.devices"
2436 167
2437 source "drivers/cpufreq/Kconfig" !! 168 source "fs/Kconfig"
2438 169
2439 endmenu # "CPU Power Management" !! 170 source "arch/m68k/Kconfig.debug"
2440 171
2441 source "drivers/acpi/Kconfig" !! 172 source "security/Kconfig"
2442 173
2443 source "arch/arm64/kvm/Kconfig" !! 174 source "crypto/Kconfig"
2444 175
>> 176 source "lib/Kconfig"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.