1 # SPDX-License-Identifier: GPL-2.0-only 1 # SPDX-License-Identifier: GPL-2.0-only
2 config ARM64 !! 2 config 64BIT
3 def_bool y !! 3 bool "64-bit kernel" if "$(ARCH)" = "sparc"
4 select ACPI_APMT if ACPI !! 4 default "$(ARCH)" = "sparc64"
5 select ACPI_CCA_REQUIRED if ACPI !! 5 help
6 select ACPI_GENERIC_GSI if ACPI !! 6 SPARC is a family of RISC microprocessors designed and marketed by
7 select ACPI_GTDT if ACPI !! 7 Sun Microsystems, incorporated. They are very widely found in Sun
8 select ACPI_HOTPLUG_CPU if ACPI_PROCES !! 8 workstations and clones.
9 select ACPI_IORT if ACPI !! 9
10 select ACPI_REDUCED_HARDWARE_ONLY if A !! 10 Say yes to build a 64-bit kernel - formerly known as sparc64
11 select ACPI_MCFG if (ACPI && PCI) !! 11 Say no to build a 32-bit kernel - formerly known as sparc
12 select ACPI_SPCR_TABLE if ACPI !! 12
13 select ACPI_PPTT if ACPI !! 13 config SPARC
14 select ARCH_HAS_DEBUG_WX !! 14 bool
15 select ARCH_BINFMT_ELF_EXTRA_PHDRS !! 15 default y
16 select ARCH_BINFMT_ELF_STATE !! 16 select ARCH_HAS_CPU_CACHE_ALIASING
17 select ARCH_CORRECT_STACKTRACE_ON_KRET !! 17 select ARCH_HAS_DMA_OPS
18 select ARCH_ENABLE_HUGEPAGE_MIGRATION !! 18 select ARCH_MIGHT_HAVE_PC_PARPORT if SPARC64 && PCI
19 select ARCH_ENABLE_MEMORY_HOTPLUG !! 19 select ARCH_MIGHT_HAVE_PC_SERIO
20 select ARCH_ENABLE_MEMORY_HOTREMOVE !! 20 select OF
21 select ARCH_ENABLE_SPLIT_PMD_PTLOCK if !! 21 select OF_PROMTREE
22 select ARCH_ENABLE_THP_MIGRATION if TR !! 22 select HAVE_ASM_MODVERSIONS
23 select ARCH_HAS_CACHE_LINE_SIZE !! 23 select HAVE_ARCH_KGDB if !SMP || SPARC64
24 select ARCH_HAS_CURRENT_STACK_POINTER !! 24 select HAVE_ARCH_TRACEHOOK
25 select ARCH_HAS_DEBUG_VIRTUAL !! 25 select HAVE_ARCH_SECCOMP if SPARC64
26 select ARCH_HAS_DEBUG_VM_PGTABLE !! 26 select HAVE_EXIT_THREAD
27 select ARCH_HAS_DMA_OPS if XEN !! 27 select HAVE_PCI
28 select ARCH_HAS_DMA_PREP_COHERENT !! 28 select SYSCTL_EXCEPTION_TRACE
29 select ARCH_HAS_ACPI_TABLE_UPGRADE if !! 29 select RTC_CLASS
30 select ARCH_HAS_FAST_MULTIPLIER !! 30 select RTC_DRV_M48T59
31 select ARCH_HAS_FORTIFY_SOURCE !! 31 select RTC_SYSTOHC
32 select ARCH_HAS_GCOV_PROFILE_ALL !! 32 select HAVE_ARCH_JUMP_LABEL if SPARC64
33 select ARCH_HAS_GIGANTIC_PAGE <<
34 select ARCH_HAS_KCOV <<
35 select ARCH_HAS_KERNEL_FPU_SUPPORT if <<
36 select ARCH_HAS_KEEPINITRD <<
37 select ARCH_HAS_MEMBARRIER_SYNC_CORE <<
38 select ARCH_HAS_MEM_ENCRYPT <<
39 select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS <<
40 select ARCH_HAS_NON_OVERLAPPING_ADDRES <<
41 select ARCH_HAS_PTE_DEVMAP <<
42 select ARCH_HAS_PTE_SPECIAL <<
43 select ARCH_HAS_HW_PTE_YOUNG <<
44 select ARCH_HAS_SETUP_DMA_OPS <<
45 select ARCH_HAS_SET_DIRECT_MAP <<
46 select ARCH_HAS_SET_MEMORY <<
47 select ARCH_STACKWALK <<
48 select ARCH_HAS_STRICT_KERNEL_RWX <<
49 select ARCH_HAS_STRICT_MODULE_RWX <<
50 select ARCH_HAS_SYNC_DMA_FOR_DEVICE <<
51 select ARCH_HAS_SYNC_DMA_FOR_CPU <<
52 select ARCH_HAS_SYSCALL_WRAPPER <<
53 select ARCH_HAS_TICK_BROADCAST if GENE <<
54 select ARCH_HAS_ZONE_DMA_SET if EXPERT <<
55 select ARCH_HAVE_ELF_PROT <<
56 select ARCH_HAVE_NMI_SAFE_CMPXCHG <<
57 select ARCH_HAVE_TRACE_MMIO_ACCESS <<
58 select ARCH_INLINE_READ_LOCK if !PREEM <<
59 select ARCH_INLINE_READ_LOCK_BH if !PR <<
60 select ARCH_INLINE_READ_LOCK_IRQ if !P <<
61 select ARCH_INLINE_READ_LOCK_IRQSAVE i <<
62 select ARCH_INLINE_READ_UNLOCK if !PRE <<
63 select ARCH_INLINE_READ_UNLOCK_BH if ! <<
64 select ARCH_INLINE_READ_UNLOCK_IRQ if <<
65 select ARCH_INLINE_READ_UNLOCK_IRQREST <<
66 select ARCH_INLINE_WRITE_LOCK if !PREE <<
67 select ARCH_INLINE_WRITE_LOCK_BH if !P <<
68 select ARCH_INLINE_WRITE_LOCK_IRQ if ! <<
69 select ARCH_INLINE_WRITE_LOCK_IRQSAVE <<
70 select ARCH_INLINE_WRITE_UNLOCK if !PR <<
71 select ARCH_INLINE_WRITE_UNLOCK_BH if <<
72 select ARCH_INLINE_WRITE_UNLOCK_IRQ if <<
73 select ARCH_INLINE_WRITE_UNLOCK_IRQRES <<
74 select ARCH_INLINE_SPIN_TRYLOCK if !PR <<
75 select ARCH_INLINE_SPIN_TRYLOCK_BH if <<
76 select ARCH_INLINE_SPIN_LOCK if !PREEM <<
77 select ARCH_INLINE_SPIN_LOCK_BH if !PR <<
78 select ARCH_INLINE_SPIN_LOCK_IRQ if !P <<
79 select ARCH_INLINE_SPIN_LOCK_IRQSAVE i <<
80 select ARCH_INLINE_SPIN_UNLOCK if !PRE <<
81 select ARCH_INLINE_SPIN_UNLOCK_BH if ! <<
82 select ARCH_INLINE_SPIN_UNLOCK_IRQ if <<
83 select ARCH_INLINE_SPIN_UNLOCK_IRQREST <<
84 select ARCH_KEEP_MEMBLOCK <<
85 select ARCH_MHP_MEMMAP_ON_MEMORY_ENABL <<
86 select ARCH_USE_CMPXCHG_LOCKREF <<
87 select ARCH_USE_GNU_PROPERTY <<
88 select ARCH_USE_MEMTEST <<
89 select ARCH_USE_QUEUED_RWLOCKS <<
90 select ARCH_USE_QUEUED_SPINLOCKS <<
91 select ARCH_USE_SYM_ANNOTATIONS <<
92 select ARCH_SUPPORTS_DEBUG_PAGEALLOC <<
93 select ARCH_SUPPORTS_HUGETLBFS <<
94 select ARCH_SUPPORTS_MEMORY_FAILURE <<
95 select ARCH_SUPPORTS_SHADOW_CALL_STACK <<
96 select ARCH_SUPPORTS_LTO_CLANG if CPU_ <<
97 select ARCH_SUPPORTS_LTO_CLANG_THIN <<
98 select ARCH_SUPPORTS_CFI_CLANG <<
99 select ARCH_SUPPORTS_ATOMIC_RMW <<
100 select ARCH_SUPPORTS_INT128 if CC_HAS_ <<
101 select ARCH_SUPPORTS_NUMA_BALANCING <<
102 select ARCH_SUPPORTS_PAGE_TABLE_CHECK <<
103 select ARCH_SUPPORTS_PER_VMA_LOCK <<
104 select ARCH_SUPPORTS_HUGE_PFNMAP if TR <<
105 select ARCH_SUPPORTS_RT <<
106 select ARCH_WANT_BATCHED_UNMAP_TLB_FLU <<
107 select ARCH_WANT_COMPAT_IPC_PARSE_VERS <<
108 select ARCH_WANT_DEFAULT_BPF_JIT <<
109 select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_ <<
110 select ARCH_WANT_FRAME_POINTERS <<
111 select ARCH_WANT_HUGE_PMD_SHARE if ARM <<
112 select ARCH_WANT_LD_ORPHAN_WARN <<
113 select ARCH_WANTS_EXECMEM_LATE if EXEC <<
114 select ARCH_WANTS_NO_INSTR <<
115 select ARCH_WANTS_THP_SWAP if ARM64_4K <<
116 select ARCH_HAS_UBSAN <<
117 select ARM_AMBA <<
118 select ARM_ARCH_TIMER <<
119 select ARM_GIC <<
120 select AUDIT_ARCH_COMPAT_GENERIC <<
121 select ARM_GIC_V2M if PCI <<
122 select ARM_GIC_V3 <<
123 select ARM_GIC_V3_ITS if PCI <<
124 select ARM_PSCI_FW <<
125 select BUILDTIME_TABLE_SORT <<
126 select CLONE_BACKWARDS <<
127 select COMMON_CLK <<
128 select CPU_PM if (SUSPEND || CPU_IDLE) <<
129 select CPUMASK_OFFSTACK if NR_CPUS > 2 <<
130 select CRC32 <<
131 select DCACHE_WORD_ACCESS <<
132 select DYNAMIC_FTRACE if FUNCTION_TRAC <<
133 select DMA_BOUNCE_UNALIGNED_KMALLOC <<
134 select DMA_DIRECT_REMAP <<
135 select EDAC_SUPPORT <<
136 select FRAME_POINTER <<
137 select FUNCTION_ALIGNMENT_4B <<
138 select FUNCTION_ALIGNMENT_8B if DYNAMI <<
139 select GENERIC_ALLOCATOR <<
140 select GENERIC_ARCH_TOPOLOGY <<
141 select GENERIC_CLOCKEVENTS_BROADCAST <<
142 select GENERIC_CPU_AUTOPROBE <<
143 select GENERIC_CPU_DEVICES <<
144 select GENERIC_CPU_VULNERABILITIES <<
145 select GENERIC_EARLY_IOREMAP <<
146 select GENERIC_IDLE_POLL_SETUP <<
147 select GENERIC_IOREMAP <<
148 select GENERIC_IRQ_IPI <<
149 select GENERIC_IRQ_PROBE <<
150 select GENERIC_IRQ_SHOW 33 select GENERIC_IRQ_SHOW
151 select GENERIC_IRQ_SHOW_LEVEL !! 34 select ARCH_WANT_IPC_PARSE_VERSION
152 select GENERIC_LIB_DEVMEM_IS_ALLOWED <<
153 select GENERIC_PCI_IOMAP 35 select GENERIC_PCI_IOMAP
154 select GENERIC_PTDUMP <<
155 select GENERIC_SCHED_CLOCK <<
156 select GENERIC_SMP_IDLE_THREAD <<
157 select GENERIC_TIME_VSYSCALL <<
158 select GENERIC_GETTIMEOFDAY <<
159 select GENERIC_VDSO_TIME_NS <<
160 select HARDIRQS_SW_RESEND <<
161 select HAS_IOPORT 36 select HAS_IOPORT
162 select HAVE_MOVE_PMD !! 37 select HAVE_HARDLOCKUP_DETECTOR_SPARC64 if SPARC64
163 select HAVE_MOVE_PUD !! 38 select HAVE_CBPF_JIT if SPARC32
164 select HAVE_PCI !! 39 select HAVE_EBPF_JIT if SPARC64
165 select HAVE_ACPI_APEI if (ACPI && EFI) !! 40 select HAVE_DEBUG_BUGVERBOSE
166 select HAVE_ALIGNED_STRUCT_PAGE !! 41 select GENERIC_SMP_IDLE_THREAD
167 select HAVE_ARCH_AUDITSYSCALL !! 42 select MODULES_USE_ELF_RELA
168 select HAVE_ARCH_BITREVERSE !! 43 select PCI_SYSCALL if PCI
169 select HAVE_ARCH_COMPILER_H !! 44 select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
170 select HAVE_ARCH_HUGE_VMALLOC !! 45 select ODD_RT_SIGACTION
171 select HAVE_ARCH_HUGE_VMAP !! 46 select OLD_SIGSUSPEND
172 select HAVE_ARCH_JUMP_LABEL !! 47 select CPU_NO_EFFICIENT_FFS
173 select HAVE_ARCH_JUMP_LABEL_RELATIVE !! 48 select LOCKDEP_SMALL if LOCKDEP
174 select HAVE_ARCH_KASAN !! 49 select NEED_DMA_MAP_STATE
175 select HAVE_ARCH_KASAN_VMALLOC !! 50 select NEED_SG_DMA_LENGTH
176 select HAVE_ARCH_KASAN_SW_TAGS !! 51 select TRACE_IRQFLAGS_SUPPORT
177 select HAVE_ARCH_KASAN_HW_TAGS if ARM6 !! 52
178 # Some instrumentation may be unsound, !! 53 config SPARC32
179 select HAVE_ARCH_KCSAN if EXPERT !! 54 def_bool !64BIT
180 select HAVE_ARCH_KFENCE !! 55 select ARCH_32BIT_OFF_T
181 select HAVE_ARCH_KGDB !! 56 select ARCH_HAS_CPU_FINALIZE_INIT if !SMP
182 select HAVE_ARCH_MMAP_RND_BITS !! 57 select ARCH_HAS_SYNC_DMA_FOR_CPU
183 select HAVE_ARCH_MMAP_RND_COMPAT_BITS !! 58 select CLZ_TAB
184 select HAVE_ARCH_PREL32_RELOCATIONS !! 59 select DMA_DIRECT_REMAP
185 select HAVE_ARCH_RANDOMIZE_KSTACK_OFFS !! 60 select GENERIC_ATOMIC64
186 select HAVE_ARCH_SECCOMP_FILTER !! 61 select GENERIC_LIB_CMPDI2
187 select HAVE_ARCH_STACKLEAK !! 62 select GENERIC_LIB_UCMPDI2
188 select HAVE_ARCH_THREAD_STRUCT_WHITELI !! 63 select HAVE_UID16
189 select HAVE_ARCH_TRACEHOOK !! 64 select HAVE_PAGE_SIZE_4KB
>> 65 select LOCK_MM_AND_FIND_VMA
>> 66 select OLD_SIGACTION
>> 67 select ZONE_DMA
>> 68
>> 69 config SPARC64
>> 70 def_bool 64BIT
>> 71 select ALTERNATE_USER_ADDRESS_SPACE
>> 72 select HAVE_FUNCTION_TRACER
>> 73 select HAVE_FUNCTION_GRAPH_TRACER
>> 74 select HAVE_KRETPROBES
>> 75 select HAVE_KPROBES
>> 76 select MMU_GATHER_RCU_TABLE_FREE if SMP
>> 77 select MMU_GATHER_MERGE_VMAS
>> 78 select MMU_GATHER_NO_FLUSH_CACHE
190 select HAVE_ARCH_TRANSPARENT_HUGEPAGE 79 select HAVE_ARCH_TRANSPARENT_HUGEPAGE
191 select HAVE_ARCH_VMAP_STACK <<
192 select HAVE_ARM_SMCCC <<
193 select HAVE_ASM_MODVERSIONS <<
194 select HAVE_EBPF_JIT <<
195 select HAVE_C_RECORDMCOUNT <<
196 select HAVE_CMPXCHG_DOUBLE <<
197 select HAVE_CMPXCHG_LOCAL <<
198 select HAVE_CONTEXT_TRACKING_USER <<
199 select HAVE_DEBUG_KMEMLEAK <<
200 select HAVE_DMA_CONTIGUOUS <<
201 select HAVE_DYNAMIC_FTRACE 80 select HAVE_DYNAMIC_FTRACE
202 select HAVE_DYNAMIC_FTRACE_WITH_ARGS \ <<
203 if (GCC_SUPPORTS_DYNAMIC_FTRAC <<
204 CLANG_SUPPORTS_DYNAMIC_FTR <<
205 select HAVE_DYNAMIC_FTRACE_WITH_DIRECT <<
206 if DYNAMIC_FTRACE_WITH_ARGS && <<
207 select HAVE_DYNAMIC_FTRACE_WITH_CALL_O <<
208 if (DYNAMIC_FTRACE_WITH_ARGS & <<
209 (CC_IS_CLANG || !CC_OPTIMI <<
210 select FTRACE_MCOUNT_USE_PATCHABLE_FUN <<
211 if DYNAMIC_FTRACE_WITH_ARGS <<
212 select HAVE_SAMPLE_FTRACE_DIRECT <<
213 select HAVE_SAMPLE_FTRACE_DIRECT_MULTI <<
214 select HAVE_EFFICIENT_UNALIGNED_ACCESS <<
215 select HAVE_GUP_FAST <<
216 select HAVE_FTRACE_MCOUNT_RECORD 81 select HAVE_FTRACE_MCOUNT_RECORD
217 select HAVE_FUNCTION_TRACER !! 82 select HAVE_PAGE_SIZE_8KB
218 select HAVE_FUNCTION_ERROR_INJECTION <<
219 select HAVE_FUNCTION_GRAPH_TRACER <<
220 select HAVE_FUNCTION_GRAPH_RETVAL <<
221 select HAVE_GCC_PLUGINS <<
222 select HAVE_HARDLOCKUP_DETECTOR_PERF i <<
223 HW_PERF_EVENTS && HAVE_PERF_EV <<
224 select HAVE_HW_BREAKPOINT if PERF_EVEN <<
225 select HAVE_IOREMAP_PROT <<
226 select HAVE_IRQ_TIME_ACCOUNTING <<
227 select HAVE_MOD_ARCH_SPECIFIC <<
228 select HAVE_NMI <<
229 select HAVE_PERF_EVENTS <<
230 select HAVE_PERF_EVENTS_NMI if ARM64_P <<
231 select HAVE_PERF_REGS <<
232 select HAVE_PERF_USER_STACK_DUMP <<
233 select HAVE_PREEMPT_DYNAMIC_KEY <<
234 select HAVE_REGS_AND_STACK_ACCESS_API <<
235 select HAVE_POSIX_CPU_TIMERS_TASK_WORK <<
236 select HAVE_FUNCTION_ARG_ACCESS_API <<
237 select MMU_GATHER_RCU_TABLE_FREE <<
238 select HAVE_RSEQ <<
239 select HAVE_RUST if RUSTC_SUPPORTS_ARM <<
240 select HAVE_STACKPROTECTOR <<
241 select HAVE_SYSCALL_TRACEPOINTS 83 select HAVE_SYSCALL_TRACEPOINTS
242 select HAVE_KPROBES !! 84 select HAVE_CONTEXT_TRACKING_USER
243 select HAVE_KRETPROBES !! 85 select HAVE_TIF_NOHZ
244 select HAVE_GENERIC_VDSO !! 86 select HAVE_DEBUG_KMEMLEAK
245 select HOTPLUG_CORE_SYNC_DEAD if HOTPL !! 87 select IOMMU_HELPER
246 select IRQ_DOMAIN <<
247 select IRQ_FORCED_THREADING <<
248 select KASAN_VMALLOC if KASAN <<
249 select LOCK_MM_AND_FIND_VMA <<
250 select MODULES_USE_ELF_RELA <<
251 select NEED_DMA_MAP_STATE <<
252 select NEED_SG_DMA_LENGTH <<
253 select OF <<
254 select OF_EARLY_FLATTREE <<
255 select PCI_DOMAINS_GENERIC if PCI <<
256 select PCI_ECAM if (ACPI && PCI) <<
257 select PCI_SYSCALL if PCI <<
258 select POWER_RESET <<
259 select POWER_SUPPLY <<
260 select SPARSE_IRQ 88 select SPARSE_IRQ
261 select SWIOTLB !! 89 select RTC_DRV_CMOS
262 select SYSCTL_EXCEPTION_TRACE !! 90 select RTC_DRV_BQ4802
263 select THREAD_INFO_IN_TASK !! 91 select RTC_DRV_SUN4V
264 select HAVE_ARCH_USERFAULTFD_MINOR if !! 92 select RTC_DRV_STARFIRE
265 select HAVE_ARCH_USERFAULTFD_WP if USE !! 93 select HAVE_PERF_EVENTS
266 select TRACE_IRQFLAGS_SUPPORT !! 94 select PERF_USE_VMALLOC
267 select TRACE_IRQFLAGS_NMI_SUPPORT !! 95 select ARCH_HAVE_NMI_SAFE_CMPXCHG
>> 96 select HAVE_C_RECORDMCOUNT
>> 97 select HAVE_ARCH_AUDITSYSCALL
>> 98 select ARCH_SUPPORTS_ATOMIC_RMW
>> 99 select ARCH_SUPPORTS_DEBUG_PAGEALLOC
>> 100 select HAVE_NMI
>> 101 select HAVE_REGS_AND_STACK_ACCESS_API
>> 102 select ARCH_USE_QUEUED_RWLOCKS
>> 103 select ARCH_USE_QUEUED_SPINLOCKS
>> 104 select GENERIC_TIME_VSYSCALL
>> 105 select ARCH_CLOCKSOURCE_DATA
>> 106 select ARCH_HAS_PTE_SPECIAL
>> 107 select PCI_DOMAINS if PCI
>> 108 select ARCH_HAS_GIGANTIC_PAGE
268 select HAVE_SOFTIRQ_ON_OWN_STACK 109 select HAVE_SOFTIRQ_ON_OWN_STACK
269 select USER_STACKTRACE_SUPPORT !! 110 select HAVE_SETUP_PER_CPU_AREA
270 select VDSO_GETRANDOM !! 111 select NEED_PER_CPU_EMBED_FIRST_CHUNK
271 help !! 112 select NEED_PER_CPU_PAGE_FIRST_CHUNK
272 ARM 64-bit (AArch64) Linux support. <<
273 <<
274 config RUSTC_SUPPORTS_ARM64 <<
275 def_bool y <<
276 depends on CPU_LITTLE_ENDIAN <<
277 # Shadow call stack is only supported <<
278 # <<
279 # When using the UNWIND_PATCH_PAC_INTO <<
280 # required due to use of the -Zfixed-x <<
281 # <<
282 # Otherwise, rustc version 1.82+ is re <<
283 # -Zsanitizer=shadow-call-stack flag. <<
284 depends on !SHADOW_CALL_STACK || RUSTC <<
285 <<
286 config CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS <<
287 def_bool CC_IS_CLANG <<
288 # https://github.com/ClangBuiltLinux/l <<
289 depends on AS_IS_GNU || (AS_IS_LLVM && <<
290 <<
291 config GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS <<
292 def_bool CC_IS_GCC <<
293 depends on $(cc-option,-fpatchable-fun <<
294 113
295 config 64BIT !! 114 config ARCH_PROC_KCORE_TEXT
296 def_bool y 115 def_bool y
297 116
298 config MMU !! 117 config CPU_BIG_ENDIAN
299 def_bool y 118 def_bool y
300 119
301 config ARM64_CONT_PTE_SHIFT <<
302 int <<
303 default 5 if PAGE_SIZE_64KB <<
304 default 7 if PAGE_SIZE_16KB <<
305 default 4 <<
306 <<
307 config ARM64_CONT_PMD_SHIFT <<
308 int <<
309 default 5 if PAGE_SIZE_64KB <<
310 default 5 if PAGE_SIZE_16KB <<
311 default 4 <<
312 <<
313 config ARCH_MMAP_RND_BITS_MIN <<
314 default 14 if PAGE_SIZE_64KB <<
315 default 16 if PAGE_SIZE_16KB <<
316 default 18 <<
317 <<
318 # max bits determined by the following formula <<
319 # VA_BITS - PAGE_SHIFT - 3 <<
320 config ARCH_MMAP_RND_BITS_MAX <<
321 default 19 if ARM64_VA_BITS=36 <<
322 default 24 if ARM64_VA_BITS=39 <<
323 default 27 if ARM64_VA_BITS=42 <<
324 default 30 if ARM64_VA_BITS=47 <<
325 default 29 if ARM64_VA_BITS=48 && ARM6 <<
326 default 31 if ARM64_VA_BITS=48 && ARM6 <<
327 default 33 if ARM64_VA_BITS=48 <<
328 default 14 if ARM64_64K_PAGES <<
329 default 16 if ARM64_16K_PAGES <<
330 default 18 <<
331 <<
332 config ARCH_MMAP_RND_COMPAT_BITS_MIN <<
333 default 7 if ARM64_64K_PAGES <<
334 default 9 if ARM64_16K_PAGES <<
335 default 11 <<
336 <<
337 config ARCH_MMAP_RND_COMPAT_BITS_MAX <<
338 default 16 <<
339 <<
340 config NO_IOPORT_MAP <<
341 def_bool y if !PCI <<
342 <<
343 config STACKTRACE_SUPPORT 120 config STACKTRACE_SUPPORT
344 def_bool y !! 121 bool
345 !! 122 default y if SPARC64
346 config ILLEGAL_POINTER_VALUE <<
347 hex <<
348 default 0xdead000000000000 <<
349 123
350 config LOCKDEP_SUPPORT 124 config LOCKDEP_SUPPORT
351 def_bool y <<
352 <<
353 config GENERIC_BUG <<
354 def_bool y <<
355 depends on BUG <<
356 <<
357 config GENERIC_BUG_RELATIVE_POINTERS <<
358 def_bool y <<
359 depends on GENERIC_BUG <<
360 <<
361 config GENERIC_HWEIGHT <<
362 def_bool y <<
363 <<
364 config GENERIC_CSUM <<
365 def_bool y <<
366 <<
367 config GENERIC_CALIBRATE_DELAY <<
368 def_bool y <<
369 <<
370 config SMP <<
371 def_bool y <<
372 <<
373 config KERNEL_MODE_NEON <<
374 def_bool y <<
375 <<
376 config FIX_EARLYCON_MEM <<
377 def_bool y <<
378 <<
379 config PGTABLE_LEVELS <<
380 int <<
381 default 2 if ARM64_16K_PAGES && ARM64_ <<
382 default 2 if ARM64_64K_PAGES && ARM64_ <<
383 default 3 if ARM64_64K_PAGES && (ARM64 <<
384 default 3 if ARM64_4K_PAGES && ARM64_V <<
385 default 3 if ARM64_16K_PAGES && ARM64_ <<
386 default 4 if ARM64_16K_PAGES && (ARM64 <<
387 default 4 if !ARM64_64K_PAGES && ARM64 <<
388 default 5 if ARM64_4K_PAGES && ARM64_V <<
389 <<
390 config ARCH_SUPPORTS_UPROBES <<
391 def_bool y <<
392 <<
393 config ARCH_PROC_KCORE_TEXT <<
394 def_bool y <<
395 <<
396 config BROKEN_GAS_INST <<
397 def_bool !$(as-instr,1:\n.inst 0\n.rep <<
398 <<
399 config BUILTIN_RETURN_ADDRESS_STRIPS_PAC <<
400 bool 125 bool
401 # Clang's __builtin_return_address() s !! 126 default y if SPARC64
402 # https://github.com/llvm/llvm-project <<
403 default y if CC_IS_CLANG <<
404 # GCC's __builtin_return_address() str <<
405 # and this was backported to 10.2.0, 9 <<
406 # https://gcc.gnu.org/bugzilla/show_bu <<
407 default y if CC_IS_GCC && (GCC_VERSION <<
408 default y if CC_IS_GCC && (GCC_VERSION <<
409 default y if CC_IS_GCC && (GCC_VERSION <<
410 default y if CC_IS_GCC && (GCC_VERSION <<
411 default n <<
412 127
413 config KASAN_SHADOW_OFFSET !! 128 config ARCH_HIBERNATION_POSSIBLE
414 hex !! 129 def_bool y if SPARC64
415 depends on KASAN_GENERIC || KASAN_SW_T <<
416 default 0xdfff800000000000 if (ARM64_V <<
417 default 0xdfffc00000000000 if (ARM64_V <<
418 default 0xdffffe0000000000 if ARM64_VA <<
419 default 0xdfffffc000000000 if ARM64_VA <<
420 default 0xdffffff800000000 if ARM64_VA <<
421 default 0xefff800000000000 if (ARM64_V <<
422 default 0xefffc00000000000 if (ARM64_V <<
423 default 0xeffffe0000000000 if ARM64_VA <<
424 default 0xefffffc000000000 if ARM64_VA <<
425 default 0xeffffff800000000 if ARM64_VA <<
426 default 0xffffffffffffffff <<
427 130
428 config UNWIND_TABLES !! 131 config AUDIT_ARCH
429 bool 132 bool
430 <<
431 source "arch/arm64/Kconfig.platforms" <<
432 <<
433 menu "Kernel Features" <<
434 <<
435 menu "ARM errata workarounds via the alternati <<
436 <<
437 config AMPERE_ERRATUM_AC03_CPU_38 <<
438 bool "AmpereOne: AC03_CPU_38: Certain <<
439 default y 133 default y
440 help <<
441 This option adds an alternative code <<
442 errata AC03_CPU_38 and AC04_CPU_10 o <<
443 134
444 The affected design reports FEAT_HAF !! 135 config MMU
445 ID_AA64MMFR1_EL1.HAFDBS, but (V)TCR_ <<
446 as required by the architecture. The <<
447 implementation suffers from an addit <<
448 A/D updates can occur after a PTE ha <<
449 <<
450 The workaround forces KVM to explici <<
451 which avoids enabling unadvertised h <<
452 at stage-2. <<
453 <<
454 If unsure, say Y. <<
455 <<
456 config ARM64_WORKAROUND_CLEAN_CACHE <<
457 bool 136 bool
458 <<
459 config ARM64_ERRATUM_826319 <<
460 bool "Cortex-A53: 826319: System might <<
461 default y <<
462 select ARM64_WORKAROUND_CLEAN_CACHE <<
463 help <<
464 This option adds an alternative code <<
465 erratum 826319 on Cortex-A53 parts u <<
466 AXI master interface and an L2 cache <<
467 <<
468 If a Cortex-A53 uses an AMBA AXI4 AC <<
469 and is unable to accept a certain wr <<
470 not progress on read data presented <<
471 system can deadlock. <<
472 <<
473 The workaround promotes data cache c <<
474 data cache clean-and-invalidate. <<
475 Please note that this does not neces <<
476 as it depends on the alternative fra <<
477 the kernel if an affected CPU is det <<
478 <<
479 If unsure, say Y. <<
480 <<
481 config ARM64_ERRATUM_827319 <<
482 bool "Cortex-A53: 827319: Data cache c <<
483 default y <<
484 select ARM64_WORKAROUND_CLEAN_CACHE <<
485 help <<
486 This option adds an alternative code <<
487 erratum 827319 on Cortex-A53 parts u <<
488 master interface and an L2 cache. <<
489 <<
490 Under certain conditions this erratu <<
491 to occur at the same time as another <<
492 on the AMBA 5 CHI interface, which c <<
493 interconnect reorders the two transa <<
494 <<
495 The workaround promotes data cache c <<
496 data cache clean-and-invalidate. <<
497 Please note that this does not neces <<
498 as it depends on the alternative fra <<
499 the kernel if an affected CPU is det <<
500 <<
501 If unsure, say Y. <<
502 <<
503 config ARM64_ERRATUM_824069 <<
504 bool "Cortex-A53: 824069: Cache line m <<
505 default y <<
506 select ARM64_WORKAROUND_CLEAN_CACHE <<
507 help <<
508 This option adds an alternative code <<
509 erratum 824069 on Cortex-A53 parts u <<
510 to a coherent interconnect. <<
511 <<
512 If a Cortex-A53 processor is executi <<
513 write instruction at the same time a <<
514 cluster is executing a cache mainten <<
515 address, then this erratum might cau <<
516 incorrectly marked as dirty. <<
517 <<
518 The workaround promotes data cache c <<
519 data cache clean-and-invalidate. <<
520 Please note that this option does no <<
521 workaround, as it depends on the alt <<
522 only patch the kernel if an affected <<
523 <<
524 If unsure, say Y. <<
525 <<
526 config ARM64_ERRATUM_819472 <<
527 bool "Cortex-A53: 819472: Store exclus <<
528 default y <<
529 select ARM64_WORKAROUND_CLEAN_CACHE <<
530 help <<
531 This option adds an alternative code <<
532 erratum 819472 on Cortex-A53 parts u <<
533 present when it is connected to a co <<
534 <<
535 If the processor is executing a load <<
536 the same time as a processor in anot <<
537 maintenance operation to the same ad <<
538 cause data corruption. <<
539 <<
540 The workaround promotes data cache c <<
541 data cache clean-and-invalidate. <<
542 Please note that this does not neces <<
543 as it depends on the alternative fra <<
544 the kernel if an affected CPU is det <<
545 <<
546 If unsure, say Y. <<
547 <<
548 config ARM64_ERRATUM_832075 <<
549 bool "Cortex-A57: 832075: possible dea <<
550 default y <<
551 help <<
552 This option adds an alternative code <<
553 erratum 832075 on Cortex-A57 parts u <<
554 <<
555 Affected Cortex-A57 parts might dead <<
556 instructions to Write-Back memory ar <<
557 <<
558 The workaround is to promote device <<
559 semantics. <<
560 Please note that this does not neces <<
561 as it depends on the alternative fra <<
562 the kernel if an affected CPU is det <<
563 <<
564 If unsure, say Y. <<
565 <<
566 config ARM64_ERRATUM_834220 <<
567 bool "Cortex-A57: 834220: Stage 2 tran <<
568 depends on KVM <<
569 help <<
570 This option adds an alternative code <<
571 erratum 834220 on Cortex-A57 parts u <<
572 <<
573 Affected Cortex-A57 parts might repo <<
574 fault as the result of a Stage 1 fau <<
575 page boundary when there is a permis <<
576 alignment fault at Stage 1 and a tra <<
577 <<
578 The workaround is to verify that the <<
579 doesn't generate a fault before hand <<
580 Please note that this does not neces <<
581 as it depends on the alternative fra <<
582 the kernel if an affected CPU is det <<
583 <<
584 If unsure, say N. <<
585 <<
586 config ARM64_ERRATUM_1742098 <<
587 bool "Cortex-A57/A72: 1742098: ELR rec <<
588 depends on COMPAT <<
589 default y <<
590 help <<
591 This option removes the AES hwcap fo <<
592 workaround erratum 1742098 on Cortex <<
593 <<
594 Affected parts may corrupt the AES s <<
595 taken between a pair of AES instruct <<
596 are only present if the cryptography <<
597 All software should have a fallback <<
598 that don't implement the cryptograph <<
599 <<
600 If unsure, say Y. <<
601 <<
602 config ARM64_ERRATUM_845719 <<
603 bool "Cortex-A53: 845719: a load might <<
604 depends on COMPAT <<
605 default y <<
606 help <<
607 This option adds an alternative code <<
608 erratum 845719 on Cortex-A53 parts u <<
609 <<
610 When running a compat (AArch32) user <<
611 part, a load at EL0 from a virtual a <<
612 bits of the virtual address used by <<
613 might return incorrect data. <<
614 <<
615 The workaround is to write the conte <<
616 return to a 32-bit task. <<
617 Please note that this does not neces <<
618 as it depends on the alternative fra <<
619 the kernel if an affected CPU is det <<
620 <<
621 If unsure, say Y. <<
622 <<
623 config ARM64_ERRATUM_843419 <<
624 bool "Cortex-A53: 843419: A load or st <<
625 default y <<
626 help <<
627 This option links the kernel with '- <<
628 enables PLT support to replace certa <<
629 cause subsequent memory accesses to <<
630 Cortex-A53 parts up to r0p4. <<
631 <<
632 If unsure, say Y. <<
633 <<
634 config ARM64_LD_HAS_FIX_ERRATUM_843419 <<
635 def_bool $(ld-option,--fix-cortex-a53- <<
636 <<
637 config ARM64_ERRATUM_1024718 <<
638 bool "Cortex-A55: 1024718: Update of D <<
639 default y 137 default y
640 help <<
641 This option adds a workaround for AR <<
642 <<
643 Affected Cortex-A55 cores (all revis <<
644 update of the hardware dirty bit whe <<
645 without a break-before-make. The wor <<
646 of hardware DBM locally on the affec <<
647 this erratum will continue to use th <<
648 <<
649 If unsure, say Y. <<
650 <<
651 config ARM64_ERRATUM_1418040 <<
652 bool "Cortex-A76/Neoverse-N1: MRC read <<
653 default y <<
654 depends on COMPAT <<
655 help <<
656 This option adds a workaround for AR <<
657 errata 1188873 and 1418040. <<
658 <<
659 Affected Cortex-A76/Neoverse-N1 core <<
660 cause register corruption when acces <<
661 from AArch32 userspace. <<
662 138
663 If unsure, say Y. !! 139 config HIGHMEM
664 <<
665 config ARM64_WORKAROUND_SPECULATIVE_AT <<
666 bool 140 bool
>> 141 default y if SPARC32
>> 142 select KMAP_LOCAL
667 143
668 config ARM64_ERRATUM_1165522 !! 144 config PGTABLE_LEVELS
669 bool "Cortex-A76: 1165522: Speculative !! 145 default 4 if 64BIT
670 default y !! 146 default 3
671 select ARM64_WORKAROUND_SPECULATIVE_AT <<
672 help <<
673 This option adds a workaround for AR <<
674 147
675 Affected Cortex-A76 cores (r0p0, r1p !! 148 config ARCH_SUPPORTS_UPROBES
676 corrupted TLBs by speculating an AT !! 149 def_bool y if SPARC64
677 context switch. <<
678 150
679 If unsure, say Y. !! 151 menu "Processor type and features"
680 152
681 config ARM64_ERRATUM_1319367 !! 153 config SMP
682 bool "Cortex-A57/A72: 1319537: Specula !! 154 bool "Symmetric multi-processing support"
683 default y <<
684 select ARM64_WORKAROUND_SPECULATIVE_AT <<
685 help 155 help
686 This option adds work arounds for AR !! 156 This enables support for systems with more than one CPU. If you have
687 and A72 erratum 1319367 !! 157 a system with only one CPU, say N. If you have a system with more
688 !! 158 than one CPU, say Y.
689 Cortex-A57 and A72 cores could end-u !! 159
690 speculating an AT instruction during !! 160 If you say N here, the kernel will run on uni- and multiprocessor
>> 161 machines, but will use only one CPU of a multiprocessor machine. If
>> 162 you say Y here, the kernel will run on many, but not all,
>> 163 uniprocessor machines. On a uniprocessor machine, the kernel
>> 164 will run faster if you say N here.
>> 165
>> 166 People using multiprocessor machines who say Y here should also say
>> 167 Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
>> 168 Management" code will be disabled if you say Y here.
691 169
692 If unsure, say Y. !! 170 See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
>> 171 available at <https://www.tldp.org/docs.html#howto>.
693 172
694 config ARM64_ERRATUM_1530923 !! 173 If you don't know what to do here, say N.
695 bool "Cortex-A55: 1530923: Speculative <<
696 default y <<
697 select ARM64_WORKAROUND_SPECULATIVE_AT <<
698 help <<
699 This option adds a workaround for AR <<
700 174
701 Affected Cortex-A55 cores (r0p0, r0p !! 175 config NR_CPUS
702 corrupted TLBs by speculating an AT !! 176 int "Maximum number of CPUs"
703 context switch. !! 177 depends on SMP
>> 178 range 2 32 if SPARC32
>> 179 range 2 4096 if SPARC64
>> 180 default 32 if SPARC32
>> 181 default 4096 if SPARC64
704 182
705 If unsure, say Y. !! 183 source "kernel/Kconfig.hz"
706 184
707 config ARM64_WORKAROUND_REPEAT_TLBI !! 185 config GENERIC_HWEIGHT
708 bool 186 bool
709 <<
710 config ARM64_ERRATUM_2441007 <<
711 bool "Cortex-A55: Completion of affect <<
712 select ARM64_WORKAROUND_REPEAT_TLBI <<
713 help <<
714 This option adds a workaround for AR <<
715 <<
716 Under very rare circumstances, affec <<
717 may not handle a race between a brea <<
718 CPU, and another CPU accessing the s <<
719 store to a page that has been unmapp <<
720 <<
721 Work around this by adding the affec <<
722 TLB sequences to be done twice. <<
723 <<
724 If unsure, say N. <<
725 <<
726 config ARM64_ERRATUM_1286807 <<
727 bool "Cortex-A76: Modification of the <<
728 select ARM64_WORKAROUND_REPEAT_TLBI <<
729 help <<
730 This option adds a workaround for AR <<
731 <<
732 On the affected Cortex-A76 cores (r0 <<
733 address for a cacheable mapping of a <<
734 accessed by a core while another cor <<
735 address to a new physical page using <<
736 break-before-make sequence, then und <<
737 TLBI+DSB completes before a read usi <<
738 invalidated has been observed by oth <<
739 workaround repeats the TLBI+DSB oper <<
740 <<
741 If unsure, say N. <<
742 <<
743 config ARM64_ERRATUM_1463225 <<
744 bool "Cortex-A76: Software Step might <<
745 default y <<
746 help <<
747 This option adds a workaround for Ar <<
748 <<
749 On the affected Cortex-A76 cores (r0 <<
750 of a system call instruction (SVC) c <<
751 subsequent interrupts when software <<
752 exception handler of the system call <<
753 is enabled or VHE is in use. <<
754 <<
755 Work around the erratum by triggerin <<
756 when handling a system call from a t <<
757 in a VHE configuration of the kernel <<
758 <<
759 If unsure, say Y. <<
760 <<
761 config ARM64_ERRATUM_1542419 <<
762 bool "Neoverse-N1: workaround mis-orde <<
763 help <<
764 This option adds a workaround for AR <<
765 1542419. <<
766 <<
767 Affected Neoverse-N1 cores could exe <<
768 modified by another CPU. The workaro <<
769 counterpart. <<
770 <<
771 Workaround the issue by hiding the D <<
772 forces user-space to perform cache m <<
773 <<
774 If unsure, say N. <<
775 <<
776 config ARM64_ERRATUM_1508412 <<
777 bool "Cortex-A77: 1508412: workaround <<
778 default y 187 default y
779 help <<
780 This option adds a workaround for Ar <<
781 <<
782 Affected Cortex-A77 cores (r0p0, r1p <<
783 of a store-exclusive or read of PAR_ <<
784 non-cacheable memory attributes. The <<
785 counterpart. <<
786 188
787 KVM guests must also have the workar !! 189 config GENERIC_CALIBRATE_DELAY
788 deadlock the system. <<
789 <<
790 Work around the issue by inserting D <<
791 register reads and warning KVM users <<
792 to prevent a speculative PAR_EL1 rea <<
793 <<
794 If unsure, say Y. <<
795 <<
796 config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MO <<
797 bool 190 bool
798 <<
799 config ARM64_ERRATUM_2051678 <<
800 bool "Cortex-A510: 2051678: disable Ha <<
801 default y 191 default y
802 help <<
803 This options adds the workaround for <<
804 Affected Cortex-A510 might not respe <<
805 hardware update of the page table's <<
806 is to not enable the feature on affe <<
807 <<
808 If unsure, say Y. <<
809 <<
810 config ARM64_ERRATUM_2077057 <<
811 bool "Cortex-A510: 2077057: workaround <<
812 default y <<
813 help <<
814 This option adds the workaround for <<
815 Affected Cortex-A510 may corrupt SPS <<
816 expected, but a Pointer Authenticati <<
817 erratum causes SPSR_EL1 to be copied <<
818 EL1 to cause a return to EL2 with a <<
819 <<
820 This can only happen when EL2 is ste <<
821 <<
822 When these conditions occur, the SPS <<
823 previous guest entry, and can be res <<
824 <<
825 If unsure, say Y. <<
826 <<
827 config ARM64_ERRATUM_2658417 <<
828 bool "Cortex-A510: 2658417: remove BF1 <<
829 default y <<
830 help <<
831 This option adds the workaround for <<
832 Affected Cortex-A510 (r0p0 to r1p1) <<
833 BFMMLA or VMMLA instructions in rare <<
834 A510 CPUs are using shared neon hard <<
835 discoverable by the kernel, hide the <<
836 user-space should not be using these <<
837 <<
838 If unsure, say Y. <<
839 <<
840 config ARM64_ERRATUM_2119858 <<
841 bool "Cortex-A710/X2: 2119858: workaro <<
842 default y <<
843 depends on CORESIGHT_TRBE <<
844 select ARM64_WORKAROUND_TRBE_OVERWRITE <<
845 help <<
846 This option adds the workaround for <<
847 <<
848 Affected Cortex-A710/X2 cores could <<
849 data at the base of the buffer (poin <<
850 the event of a WRAP event. <<
851 <<
852 Work around the issue by always maki <<
853 256 bytes before enabling the buffer <<
854 the buffer with ETM ignore packets u <<
855 <<
856 If unsure, say Y. <<
857 <<
858 config ARM64_ERRATUM_2139208 <<
859 bool "Neoverse-N2: 2139208: workaround <<
860 default y <<
861 depends on CORESIGHT_TRBE <<
862 select ARM64_WORKAROUND_TRBE_OVERWRITE <<
863 help <<
864 This option adds the workaround for <<
865 192
866 Affected Neoverse-N2 cores could ove !! 193 config ARCH_MAY_HAVE_PC_FDC
867 data at the base of the buffer (poin <<
868 the event of a WRAP event. <<
869 <<
870 Work around the issue by always maki <<
871 256 bytes before enabling the buffer <<
872 the buffer with ETM ignore packets u <<
873 <<
874 If unsure, say Y. <<
875 <<
876 config ARM64_WORKAROUND_TSB_FLUSH_FAILURE <<
877 bool 194 bool
878 <<
879 config ARM64_ERRATUM_2054223 <<
880 bool "Cortex-A710: 2054223: workaround <<
881 default y 195 default y
882 select ARM64_WORKAROUND_TSB_FLUSH_FAIL <<
883 help <<
884 Enable workaround for ARM Cortex-A71 <<
885 <<
886 Affected cores may fail to flush the <<
887 the PE is in trace prohibited state. <<
888 of the trace cached. <<
889 <<
890 Workaround is to issue two TSB conse <<
891 <<
892 If unsure, say Y. <<
893 <<
894 config ARM64_ERRATUM_2067961 <<
895 bool "Neoverse-N2: 2067961: workaround <<
896 default y <<
897 select ARM64_WORKAROUND_TSB_FLUSH_FAIL <<
898 help <<
899 Enable workaround for ARM Neoverse-N <<
900 196
901 Affected cores may fail to flush the !! 197 config EMULATED_CMPXCHG
902 the PE is in trace prohibited state. <<
903 of the trace cached. <<
904 <<
905 Workaround is to issue two TSB conse <<
906 <<
907 If unsure, say Y. <<
908 <<
909 config ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANG <<
910 bool 198 bool
911 !! 199 default y if SPARC32
912 config ARM64_ERRATUM_2253138 <<
913 bool "Neoverse-N2: 2253138: workaround <<
914 depends on CORESIGHT_TRBE <<
915 default y <<
916 select ARM64_WORKAROUND_TRBE_WRITE_OUT <<
917 help <<
918 This option adds the workaround for <<
919 <<
920 Affected Neoverse-N2 cores might wri <<
921 for TRBE. Under some conditions, the <<
922 virtually addressed page following t <<
923 (i.e., the TRBLIMITR_EL1.LIMIT), ins <<
924 <<
925 Work around this in the driver by al <<
926 page beyond the TRBLIMITR_EL1.LIMIT, <<
927 <<
928 If unsure, say Y. <<
929 <<
930 config ARM64_ERRATUM_2224489 <<
931 bool "Cortex-A710/X2: 2224489: workaro <<
932 depends on CORESIGHT_TRBE <<
933 default y <<
934 select ARM64_WORKAROUND_TRBE_WRITE_OUT <<
935 help 200 help
936 This option adds the workaround for !! 201 Sparc32 does not have a CAS instruction like sparc64. cmpxchg()
937 !! 202 is emulated, and therefore it is not completely atomic.
938 Affected Cortex-A710/X2 cores might <<
939 for TRBE. Under some conditions, the <<
940 virtually addressed page following t <<
941 (i.e., the TRBLIMITR_EL1.LIMIT), ins <<
942 <<
943 Work around this in the driver by al <<
944 page beyond the TRBLIMITR_EL1.LIMIT, <<
945 <<
946 If unsure, say Y. <<
947 <<
948 config ARM64_ERRATUM_2441009 <<
949 bool "Cortex-A510: Completion of affec <<
950 select ARM64_WORKAROUND_REPEAT_TLBI <<
951 help <<
952 This option adds a workaround for AR <<
953 <<
954 Under very rare circumstances, affec <<
955 may not handle a race between a brea <<
956 CPU, and another CPU accessing the s <<
957 store to a page that has been unmapp <<
958 <<
959 Work around this by adding the affec <<
960 TLB sequences to be done twice. <<
961 <<
962 If unsure, say N. <<
963 <<
964 config ARM64_ERRATUM_2064142 <<
965 bool "Cortex-A510: 2064142: workaround <<
966 depends on CORESIGHT_TRBE <<
967 default y <<
968 help <<
969 This option adds the workaround for <<
970 <<
971 Affected Cortex-A510 core might fail <<
972 TRBE has been disabled. Under some c <<
973 writes into TRBE registers TRBLIMITR <<
974 and TRBTRG_EL1 will be ignored and w <<
975 <<
976 Work around this in the driver by ex <<
977 is stopped and before performing a s <<
978 registers. <<
979 <<
980 If unsure, say Y. <<
981 <<
982 config ARM64_ERRATUM_2038923 <<
983 bool "Cortex-A510: 2038923: workaround <<
984 depends on CORESIGHT_TRBE <<
985 default y <<
986 help <<
987 This option adds the workaround for <<
988 <<
989 Affected Cortex-A510 core might caus <<
990 prohibited within the CPU. As a resu <<
991 might be corrupted. This happens aft <<
992 TRBLIMITR_EL1.E, followed by just a <<
993 execution changes from a context, in <<
994 isn't, or vice versa. In these menti <<
995 is prohibited is inconsistent betwee <<
996 the trace buffer state might be corr <<
997 <<
998 Work around this in the driver by pr <<
999 trace is prohibited or not based on <<
1000 change to TRBLIMITR_EL1.E with at l <<
1001 two ISB instructions if no ERET is <<
1002 <<
1003 If unsure, say Y. <<
1004 203
1005 config ARM64_ERRATUM_1902691 !! 204 # Makefile helpers
1006 bool "Cortex-A510: 1902691: workaroun !! 205 config SPARC32_SMP
1007 depends on CORESIGHT_TRBE <<
1008 default y <<
1009 help <<
1010 This option adds the workaround for <<
1011 <<
1012 Affected Cortex-A510 core might cau <<
1013 into the memory. Effectively TRBE i <<
1014 trace data. <<
1015 <<
1016 Work around this problem in the dri <<
1017 affected cpus. The firmware must ha <<
1018 on such implementations. This will <<
1019 do this already. <<
1020 <<
1021 If unsure, say Y. <<
1022 <<
1023 config ARM64_ERRATUM_2457168 <<
1024 bool "Cortex-A510: 2457168: workaroun <<
1025 depends on ARM64_AMU_EXTN <<
1026 default y <<
1027 help <<
1028 This option adds the workaround for <<
1029 <<
1030 The AMU counter AMEVCNTR01 (constan <<
1031 as the system counter. On affected <<
1032 incorrectly giving a significantly <<
1033 <<
1034 Work around this problem by returni <<
1035 key locations that results in disab <<
1036 is the same to firmware disabling a <<
1037 <<
1038 If unsure, say Y. <<
1039 <<
1040 config ARM64_ERRATUM_2645198 <<
1041 bool "Cortex-A715: 2645198: Workaroun <<
1042 default y <<
1043 help <<
1044 This option adds the workaround for <<
1045 <<
1046 If a Cortex-A715 cpu sees a page ma <<
1047 to non-executable, it may corrupt t <<
1048 next instruction abort caused by pe <<
1049 <<
1050 Only user-space does executable to <<
1051 mprotect() system call. Workaround <<
1052 TLB invalidation, for all changes t <<
1053 <<
1054 If unsure, say Y. <<
1055 <<
1056 config ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LO <<
1057 bool 206 bool
1058 <<
1059 config ARM64_ERRATUM_2966298 <<
1060 bool "Cortex-A520: 2966298: workaroun <<
1061 select ARM64_WORKAROUND_SPECULATIVE_U <<
1062 default y <<
1063 help <<
1064 This option adds the workaround for <<
1065 <<
1066 On an affected Cortex-A520 core, a <<
1067 load might leak data from a privile <<
1068 <<
1069 Work around this problem by executi <<
1070 <<
1071 If unsure, say Y. <<
1072 <<
1073 config ARM64_ERRATUM_3117295 <<
1074 bool "Cortex-A510: 3117295: workaroun <<
1075 select ARM64_WORKAROUND_SPECULATIVE_U <<
1076 default y <<
1077 help <<
1078 This option adds the workaround for <<
1079 <<
1080 On an affected Cortex-A510 core, a <<
1081 load might leak data from a privile <<
1082 <<
1083 Work around this problem by executi <<
1084 <<
1085 If unsure, say Y. <<
1086 <<
1087 config ARM64_ERRATUM_3194386 <<
1088 bool "Cortex-*/Neoverse-*: workaround <<
1089 default y <<
1090 help <<
1091 This option adds the workaround for <<
1092 <<
1093 * ARM Cortex-A76 erratum 3324349 <<
1094 * ARM Cortex-A77 erratum 3324348 <<
1095 * ARM Cortex-A78 erratum 3324344 <<
1096 * ARM Cortex-A78C erratum 3324346 <<
1097 * ARM Cortex-A78C erratum 3324347 <<
1098 * ARM Cortex-A710 erratam 3324338 <<
1099 * ARM Cortex-A715 errartum 3456084 <<
1100 * ARM Cortex-A720 erratum 3456091 <<
1101 * ARM Cortex-A725 erratum 3456106 <<
1102 * ARM Cortex-X1 erratum 3324344 <<
1103 * ARM Cortex-X1C erratum 3324346 <<
1104 * ARM Cortex-X2 erratum 3324338 <<
1105 * ARM Cortex-X3 erratum 3324335 <<
1106 * ARM Cortex-X4 erratum 3194386 <<
1107 * ARM Cortex-X925 erratum 3324334 <<
1108 * ARM Neoverse-N1 erratum 3324349 <<
1109 * ARM Neoverse N2 erratum 3324339 <<
1110 * ARM Neoverse-N3 erratum 3456111 <<
1111 * ARM Neoverse-V1 erratum 3324341 <<
1112 * ARM Neoverse V2 erratum 3324336 <<
1113 * ARM Neoverse-V3 erratum 3312417 <<
1114 <<
1115 On affected cores "MSR SSBS, #0" in <<
1116 subsequent speculative instructions <<
1117 speculative store bypassing. <<
1118 <<
1119 Work around this problem by placing <<
1120 Instruction Synchronization Barrier <<
1121 SSBS. The presence of the SSBS spec <<
1122 from hwcaps and EL0 reads of ID_AA6 <<
1123 will use the PR_SPEC_STORE_BYPASS p <<
1124 <<
1125 If unsure, say Y. <<
1126 <<
1127 config CAVIUM_ERRATUM_22375 <<
1128 bool "Cavium erratum 22375, 24313" <<
1129 default y <<
1130 help <<
1131 Enable workaround for errata 22375 <<
1132 <<
1133 This implements two gicv3-its errat <<
1134 with a small impact affecting only <<
1135 <<
1136 erratum 22375: only alloc 8MB tab <<
1137 erratum 24313: ignore memory acce <<
1138 <<
1139 The fixes are in ITS initialization <<
1140 type and table size provided by the <<
1141 <<
1142 If unsure, say Y. <<
1143 <<
1144 config CAVIUM_ERRATUM_23144 <<
1145 bool "Cavium erratum 23144: ITS SYNC <<
1146 depends on NUMA <<
1147 default y <<
1148 help <<
1149 ITS SYNC command hang for cross nod <<
1150 <<
1151 If unsure, say Y. <<
1152 <<
1153 config CAVIUM_ERRATUM_23154 <<
1154 bool "Cavium errata 23154 and 38545: <<
1155 default y <<
1156 help <<
1157 The ThunderX GICv3 implementation r <<
1158 reading the IAR status to ensure da <<
1159 (access to icc_iar1_el1 is not sync <<
1160 <<
1161 It also suffers from erratum 38545 <<
1162 OcteonTX and OcteonTX2), resulting <<
1163 spuriously presented to the CPU int <<
1164 <<
1165 If unsure, say Y. <<
1166 <<
1167 config CAVIUM_ERRATUM_27456 <<
1168 bool "Cavium erratum 27456: Broadcast <<
1169 default y <<
1170 help <<
1171 On ThunderX T88 pass 1.x through 2. <<
1172 instructions may cause the icache t <<
1173 contains data for a non-current ASI <<
1174 invalidate the icache when changing <<
1175 <<
1176 If unsure, say Y. <<
1177 <<
1178 config CAVIUM_ERRATUM_30115 <<
1179 bool "Cavium erratum 30115: Guest may <<
1180 default y 207 default y
1181 help !! 208 depends on SPARC32 && SMP
1182 On ThunderX T88 pass 1.x through 2. <<
1183 1.2, and T83 Pass 1.0, KVM guest ex <<
1184 interrupts in host. Trapping both G <<
1185 accesses sidesteps the issue. <<
1186 <<
1187 If unsure, say Y. <<
1188 <<
1189 config CAVIUM_TX2_ERRATUM_219 <<
1190 bool "Cavium ThunderX2 erratum 219: P <<
1191 default y <<
1192 help <<
1193 On Cavium ThunderX2, a load, store <<
1194 TTBR update and the corresponding c <<
1195 cause a spurious Data Abort to be d <<
1196 the CPU core. <<
1197 209
1198 Work around the issue by avoiding t !! 210 config SPARC64_SMP
1199 trapping KVM guest TTBRx_EL1 writes !! 211 bool
1200 trap handler performs the correspon <<
1201 instruction and ensures context syn <<
1202 exception return. <<
1203 <<
1204 If unsure, say Y. <<
1205 <<
1206 config FUJITSU_ERRATUM_010001 <<
1207 bool "Fujitsu-A64FX erratum E#010001: <<
1208 default y <<
1209 help <<
1210 This option adds a workaround for F <<
1211 On some variants of the Fujitsu-A64 <<
1212 accesses may cause undefined fault <<
1213 This fault occurs under a specific <<
1214 load/store instruction performs an <<
1215 case-1 TTBR0_EL1 with TCR_EL1.NFD0 <<
1216 case-2 TTBR0_EL2 with TCR_EL2.NFD0 <<
1217 case-3 TTBR1_EL1 with TCR_EL1.NFD1 <<
1218 case-4 TTBR1_EL2 with TCR_EL2.NFD1 <<
1219 <<
1220 The workaround is to ensure these b <<
1221 The workaround only affects the Fuj <<
1222 <<
1223 If unsure, say Y. <<
1224 <<
1225 config HISILICON_ERRATUM_161600802 <<
1226 bool "Hip07 161600802: Erroneous redi <<
1227 default y <<
1228 help <<
1229 The HiSilicon Hip07 SoC uses the wr <<
1230 when issued ITS commands such as VM <<
1231 a 128kB offset to be applied to the <<
1232 <<
1233 If unsure, say Y. <<
1234 <<
1235 config QCOM_FALKOR_ERRATUM_1003 <<
1236 bool "Falkor E1003: Incorrect transla <<
1237 default y <<
1238 help <<
1239 On Falkor v1, an incorrect ASID may <<
1240 and BADDR are changed together in T <<
1241 in TTBR1_EL1, this situation only o <<
1242 then only for entries in the walk c <<
1243 is unchanged. Work around the errat <<
1244 entries for the trampoline before e <<
1245 <<
1246 config QCOM_FALKOR_ERRATUM_1009 <<
1247 bool "Falkor E1009: Prematurely compl <<
1248 default y <<
1249 select ARM64_WORKAROUND_REPEAT_TLBI <<
1250 help <<
1251 On Falkor v1, the CPU may premature <<
1252 TLBI xxIS invalidate maintenance op <<
1253 one more time to fix the issue. <<
1254 <<
1255 If unsure, say Y. <<
1256 <<
1257 config QCOM_QDF2400_ERRATUM_0065 <<
1258 bool "QDF2400 E0065: Incorrect GITS_T <<
1259 default y 212 default y
1260 help !! 213 depends on SPARC64 && SMP
1261 On Qualcomm Datacenter Technologies <<
1262 ITE size incorrectly. The GITS_TYPE <<
1263 been indicated as 16Bytes (0xf), no <<
1264 <<
1265 If unsure, say Y. <<
1266 214
1267 config QCOM_FALKOR_ERRATUM_E1041 !! 215 config EARLYFB
1268 bool "Falkor E1041: Speculative instr !! 216 bool "Support for early boot text console"
1269 default y 217 default y
>> 218 depends on SPARC64
>> 219 select FONT_SUN8x16
>> 220 select FONT_SUPPORT
1270 help 221 help
1271 Falkor CPU may speculatively fetch !! 222 Say Y here to enable a faster early framebuffer boot console.
1272 memory location when MMU translatio <<
1273 to SCTLR_ELn[M]=0. Prefix an ISB in <<
1274 223
1275 If unsure, say Y. !! 224 config HOTPLUG_CPU
1276 !! 225 bool "Support for hot-pluggable CPUs"
1277 config NVIDIA_CARMEL_CNP_ERRATUM !! 226 depends on SPARC64 && SMP
1278 bool "NVIDIA Carmel CNP: CNP on Carme <<
1279 default y <<
1280 help 227 help
1281 If CNP is enabled on Carmel cores, !! 228 Say Y here to experiment with turning CPUs off and on. CPUs
1282 invalidate shared TLB entries insta !! 229 can be controlled through /sys/devices/system/cpu/cpu#.
1283 on standard ARM cores. !! 230 Say N if you want to disable CPU hotplug.
1284 231
1285 If unsure, say Y. !! 232 if SPARC64
>> 233 source "drivers/cpufreq/Kconfig"
>> 234 endif
1286 235
1287 config ROCKCHIP_ERRATUM_3588001 !! 236 config US3_MC
1288 bool "Rockchip 3588001: GIC600 can no !! 237 tristate "UltraSPARC-III Memory Controller driver"
>> 238 depends on SPARC64
1289 default y 239 default y
1290 help 240 help
1291 The Rockchip RK3588 GIC600 SoC inte !! 241 This adds a driver for the UltraSPARC-III memory controller.
1292 This means, that its sharability fe !! 242 Loading this driver allows exact mnemonic strings to be
1293 is supported by the IP itself. !! 243 printed in the event of a memory error, so that the faulty DIMM
>> 244 on the motherboard can be matched to the error.
1294 245
1295 If unsure, say Y. !! 246 If in doubt, say Y, as this information can be very useful.
1296 247
1297 config SOCIONEXT_SYNQUACER_PREITS !! 248 # Global things across all Sun machines.
1298 bool "Socionext Synquacer: Workaround !! 249 config GENERIC_LOCKBREAK
>> 250 bool
1299 default y 251 default y
1300 help !! 252 depends on SPARC64 && SMP && PREEMPTION
1301 Socionext Synquacer SoCs implement <<
1302 MSI doorbell writes with non-zero v <<
1303 <<
1304 If unsure, say Y. <<
1305 <<
1306 endmenu # "ARM errata workarounds via the alt <<
1307 <<
1308 choice <<
1309 prompt "Page size" <<
1310 default ARM64_4K_PAGES <<
1311 help <<
1312 Page size (translation granule) con <<
1313 <<
1314 config ARM64_4K_PAGES <<
1315 bool "4KB" <<
1316 select HAVE_PAGE_SIZE_4KB <<
1317 help <<
1318 This feature enables 4KB pages supp <<
1319 <<
1320 config ARM64_16K_PAGES <<
1321 bool "16KB" <<
1322 select HAVE_PAGE_SIZE_16KB <<
1323 help <<
1324 The system will use 16KB pages supp <<
1325 requires applications compiled with <<
1326 aligned segments. <<
1327 <<
1328 config ARM64_64K_PAGES <<
1329 bool "64KB" <<
1330 select HAVE_PAGE_SIZE_64KB <<
1331 help <<
1332 This feature enables 64KB pages sup <<
1333 allowing only two levels of page ta <<
1334 look-up. AArch32 emulation requires <<
1335 with 64K aligned segments. <<
1336 <<
1337 endchoice <<
1338 <<
1339 choice <<
1340 prompt "Virtual address space size" <<
1341 default ARM64_VA_BITS_52 <<
1342 help <<
1343 Allows choosing one of multiple pos <<
1344 space sizes. The level of translati <<
1345 a combination of page size and virt <<
1346 <<
1347 config ARM64_VA_BITS_36 <<
1348 bool "36-bit" if EXPERT <<
1349 depends on PAGE_SIZE_16KB <<
1350 <<
1351 config ARM64_VA_BITS_39 <<
1352 bool "39-bit" <<
1353 depends on PAGE_SIZE_4KB <<
1354 <<
1355 config ARM64_VA_BITS_42 <<
1356 bool "42-bit" <<
1357 depends on PAGE_SIZE_64KB <<
1358 <<
1359 config ARM64_VA_BITS_47 <<
1360 bool "47-bit" <<
1361 depends on PAGE_SIZE_16KB <<
1362 <<
1363 config ARM64_VA_BITS_48 <<
1364 bool "48-bit" <<
1365 <<
1366 config ARM64_VA_BITS_52 <<
1367 bool "52-bit" <<
1368 depends on ARM64_PAN || !ARM64_SW_TTB <<
1369 help <<
1370 Enable 52-bit virtual addressing fo <<
1371 requested via a hint to mmap(). The <<
1372 virtual addresses for its own mappi <<
1373 this feature is available, otherwis <<
1374 <<
1375 NOTE: Enabling 52-bit virtual addre <<
1376 ARMv8.3 Pointer Authentication will <<
1377 reduced from 7 bits to 3 bits, whic <<
1378 impact on its susceptibility to bru <<
1379 <<
1380 If unsure, select 48-bit virtual ad <<
1381 <<
1382 endchoice <<
1383 <<
1384 config ARM64_FORCE_52BIT <<
1385 bool "Force 52-bit virtual addresses <<
1386 depends on ARM64_VA_BITS_52 && EXPERT <<
1387 help <<
1388 For systems with 52-bit userspace V <<
1389 to maintain compatibility with olde <<
1390 unless a hint is supplied to mmap. <<
1391 <<
1392 This configuration option disables <<
1393 forces all userspace addresses to b <<
1394 should only enable this configurati <<
1395 memory management code. If unsure s <<
1396 <<
1397 config ARM64_VA_BITS <<
1398 int <<
1399 default 36 if ARM64_VA_BITS_36 <<
1400 default 39 if ARM64_VA_BITS_39 <<
1401 default 42 if ARM64_VA_BITS_42 <<
1402 default 47 if ARM64_VA_BITS_47 <<
1403 default 48 if ARM64_VA_BITS_48 <<
1404 default 52 if ARM64_VA_BITS_52 <<
1405 <<
1406 choice <<
1407 prompt "Physical address space size" <<
1408 default ARM64_PA_BITS_48 <<
1409 help <<
1410 Choose the maximum physical address <<
1411 support. <<
1412 <<
1413 config ARM64_PA_BITS_48 <<
1414 bool "48-bit" <<
1415 depends on ARM64_64K_PAGES || !ARM64_ <<
1416 <<
1417 config ARM64_PA_BITS_52 <<
1418 bool "52-bit" <<
1419 depends on ARM64_64K_PAGES || ARM64_V <<
1420 depends on ARM64_PAN || !ARM64_SW_TTB <<
1421 help <<
1422 Enable support for a 52-bit physica <<
1423 part of the ARMv8.2-LPA extension. <<
1424 <<
1425 With this enabled, the kernel will <<
1426 do not support ARMv8.2-LPA, but wit <<
1427 minor performance overhead). <<
1428 <<
1429 endchoice <<
1430 253
1431 config ARM64_PA_BITS <<
1432 int <<
1433 default 48 if ARM64_PA_BITS_48 <<
1434 default 52 if ARM64_PA_BITS_52 <<
1435 <<
1436 config ARM64_LPA2 <<
1437 def_bool y <<
1438 depends on ARM64_PA_BITS_52 && !ARM64 <<
1439 <<
1440 choice <<
1441 prompt "Endianness" <<
1442 default CPU_LITTLE_ENDIAN <<
1443 help <<
1444 Select the endianness of data acces <<
1445 applications will need to be compil <<
1446 that is selected here. <<
1447 <<
1448 config CPU_BIG_ENDIAN <<
1449 bool "Build big-endian kernel" <<
1450 # https://github.com/llvm/llvm-projec <<
1451 depends on AS_IS_GNU || AS_VERSION >= <<
1452 help <<
1453 Say Y if you plan on running a kern <<
1454 <<
1455 config CPU_LITTLE_ENDIAN <<
1456 bool "Build little-endian kernel" <<
1457 help <<
1458 Say Y if you plan on running a kern <<
1459 This is usually the case for distri <<
1460 <<
1461 endchoice <<
1462 <<
1463 config SCHED_MC <<
1464 bool "Multi-core scheduler support" <<
1465 help <<
1466 Multi-core scheduler support improv <<
1467 making when dealing with multi-core <<
1468 increased overhead in some places. <<
1469 <<
1470 config SCHED_CLUSTER <<
1471 bool "Cluster scheduler support" <<
1472 help <<
1473 Cluster scheduler support improves <<
1474 making when dealing with machines t <<
1475 Cluster usually means a couple of C <<
1476 by sharing mid-level caches, last-l <<
1477 busses. <<
1478 <<
1479 config SCHED_SMT <<
1480 bool "SMT scheduler support" <<
1481 help <<
1482 Improves the CPU scheduler's decisi <<
1483 MultiThreading at a cost of slightl <<
1484 places. If unsure say N here. <<
1485 <<
1486 config NR_CPUS <<
1487 int "Maximum number of CPUs (2-4096)" <<
1488 range 2 4096 <<
1489 default "512" <<
1490 <<
1491 config HOTPLUG_CPU <<
1492 bool "Support for hot-pluggable CPUs" <<
1493 select GENERIC_IRQ_MIGRATION <<
1494 help <<
1495 Say Y here to experiment with turni <<
1496 can be controlled through /sys/devi <<
1497 <<
1498 # Common NUMA Features <<
1499 config NUMA 254 config NUMA
1500 bool "NUMA Memory Allocation and Sche !! 255 bool "NUMA support"
1501 select GENERIC_ARCH_NUMA !! 256 depends on SPARC64 && SMP
1502 select OF_NUMA <<
1503 select HAVE_SETUP_PER_CPU_AREA <<
1504 select NEED_PER_CPU_EMBED_FIRST_CHUNK <<
1505 select NEED_PER_CPU_PAGE_FIRST_CHUNK <<
1506 select USE_PERCPU_NUMA_NODE_ID <<
1507 help <<
1508 Enable NUMA (Non-Uniform Memory Acc <<
1509 <<
1510 The kernel will try to allocate mem <<
1511 local memory of the CPU and add som <<
1512 NUMA awareness to the kernel. <<
1513 257
1514 config NODES_SHIFT 258 config NODES_SHIFT
1515 int "Maximum NUMA Nodes (as a power o 259 int "Maximum NUMA Nodes (as a power of 2)"
1516 range 1 10 !! 260 range 4 5 if SPARC64
1517 default "4" !! 261 default "5"
1518 depends on NUMA 262 depends on NUMA
1519 help 263 help
1520 Specify the maximum number of NUMA 264 Specify the maximum number of NUMA Nodes available on the target
1521 system. Increases memory reserved 265 system. Increases memory reserved to accommodate various tables.
1522 266
1523 source "kernel/Kconfig.hz" <<
1524 <<
1525 config ARCH_SPARSEMEM_ENABLE 267 config ARCH_SPARSEMEM_ENABLE
1526 def_bool y !! 268 def_bool y if SPARC64
1527 select SPARSEMEM_VMEMMAP_ENABLE 269 select SPARSEMEM_VMEMMAP_ENABLE
1528 select SPARSEMEM_VMEMMAP <<
1529 <<
1530 config HW_PERF_EVENTS <<
1531 def_bool y <<
1532 depends on ARM_PMU <<
1533 <<
1534 # Supported by clang >= 7.0 or GCC >= 12.0.0 <<
1535 config CC_HAVE_SHADOW_CALL_STACK <<
1536 def_bool $(cc-option, -fsanitize=shad <<
1537 270
1538 config PARAVIRT !! 271 config ARCH_SPARSEMEM_DEFAULT
1539 bool "Enable paravirtualization code" !! 272 def_bool y if SPARC64
1540 help <<
1541 This changes the kernel so it can m <<
1542 under a hypervisor, potentially imp <<
1543 over full virtualization. <<
1544 <<
1545 config PARAVIRT_TIME_ACCOUNTING <<
1546 bool "Paravirtual steal time accounti <<
1547 select PARAVIRT <<
1548 help <<
1549 Select this option to enable fine g <<
1550 accounting. Time spent executing ot <<
1551 the current vCPU is discounted from <<
1552 that, there can be a small performa <<
1553 273
1554 If in doubt, say N here. <<
1555 <<
1556 config ARCH_SUPPORTS_KEXEC <<
1557 def_bool PM_SLEEP_SMP <<
1558 <<
1559 config ARCH_SUPPORTS_KEXEC_FILE <<
1560 def_bool y <<
1561 <<
1562 config ARCH_SELECTS_KEXEC_FILE <<
1563 def_bool y <<
1564 depends on KEXEC_FILE <<
1565 select HAVE_IMA_KEXEC if IMA <<
1566 <<
1567 config ARCH_SUPPORTS_KEXEC_SIG <<
1568 def_bool y <<
1569 <<
1570 config ARCH_SUPPORTS_KEXEC_IMAGE_VERIFY_SIG <<
1571 def_bool y <<
1572 <<
1573 config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG <<
1574 def_bool y <<
1575 <<
1576 config ARCH_SUPPORTS_CRASH_DUMP <<
1577 def_bool y <<
1578 <<
1579 config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATI <<
1580 def_bool CRASH_RESERVE <<
1581 <<
1582 config TRANS_TABLE <<
1583 def_bool y <<
1584 depends on HIBERNATION || KEXEC_CORE <<
1585 <<
1586 config XEN_DOM0 <<
1587 def_bool y <<
1588 depends on XEN <<
1589 <<
1590 config XEN <<
1591 bool "Xen guest support on ARM64" <<
1592 depends on ARM64 && OF <<
1593 select SWIOTLB_XEN <<
1594 select PARAVIRT <<
1595 help <<
1596 Say Y if you want to run Linux in a <<
1597 <<
1598 # include/linux/mmzone.h requires the followi <<
1599 # <<
1600 # MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SI <<
1601 # <<
1602 # so the maximum value of MAX_PAGE_ORDER is S <<
1603 # <<
1604 # | SECTION_SIZE_BITS | PAGE_SHIFT | m <<
1605 # ----+-------------------+--------------+--- <<
1606 # 4K | 27 | 12 | <<
1607 # 16K | 27 | 14 | <<
1608 # 64K | 29 | 16 | <<
1609 config ARCH_FORCE_MAX_ORDER 274 config ARCH_FORCE_MAX_ORDER
1610 int !! 275 int "Order of maximal physically contiguous allocations"
1611 default "13" if ARM64_64K_PAGES !! 276 default "12"
1612 default "11" if ARM64_16K_PAGES <<
1613 default "10" <<
1614 help 277 help
1615 The kernel page allocator limits th 278 The kernel page allocator limits the size of maximal physically
1616 contiguous allocations. The limit i 279 contiguous allocations. The limit is called MAX_PAGE_ORDER and it
1617 defines the maximal power of two of 280 defines the maximal power of two of number of pages that can be
1618 allocated as a single contiguous bl 281 allocated as a single contiguous block. This option allows
1619 overriding the default setting when 282 overriding the default setting when ability to allocate very
1620 large blocks of physically contiguo 283 large blocks of physically contiguous memory is required.
1621 284
1622 The maximal size of allocation cann <<
1623 section, so the value of MAX_PAGE_O <<
1624 <<
1625 MAX_PAGE_ORDER + PAGE_SHIFT <= SE <<
1626 <<
1627 Don't change if unsure. 285 Don't change if unsure.
1628 286
1629 config UNMAP_KERNEL_AT_EL0 !! 287 if SPARC64 || COMPILE_TEST
1630 bool "Unmap kernel when running in us !! 288 source "kernel/power/Kconfig"
1631 default y !! 289 endif
1632 help <<
1633 Speculation attacks against some hi <<
1634 be used to bypass MMU permission ch <<
1635 userspace. This can be defended aga <<
1636 when running in userspace, mapping <<
1637 via a trampoline page in the vector <<
1638 <<
1639 If unsure, say Y. <<
1640 <<
1641 config MITIGATE_SPECTRE_BRANCH_HISTORY <<
1642 bool "Mitigate Spectre style attacks <<
1643 default y <<
1644 help <<
1645 Speculation attacks against some hi <<
1646 make use of branch history to influ <<
1647 When taking an exception from user- <<
1648 or a firmware call overwrites the b <<
1649 <<
1650 config RODATA_FULL_DEFAULT_ENABLED <<
1651 bool "Apply r/o permissions of VM are <<
1652 default y <<
1653 help <<
1654 Apply read-only attributes of VM ar <<
1655 the backing pages as well. This pre <<
1656 from being modified (inadvertently <<
1657 mapping of the same memory page. Th <<
1658 be turned off at runtime by passing <<
1659 with rodata=full if this option is <<
1660 <<
1661 This requires the linear region to <<
1662 which may adversely affect performa <<
1663 <<
1664 config ARM64_SW_TTBR0_PAN <<
1665 bool "Emulate Privileged Access Never <<
1666 depends on !KCSAN <<
1667 help <<
1668 Enabling this option prevents the k <<
1669 user-space memory directly by point <<
1670 zeroed area and reserved ASID. The <<
1671 restore the valid TTBR0_EL1 tempora <<
1672 <<
1673 config ARM64_TAGGED_ADDR_ABI <<
1674 bool "Enable the tagged user addresse <<
1675 default y <<
1676 help <<
1677 When this option is enabled, user a <<
1678 relaxed ABI via prctl() allowing ta <<
1679 to system calls as pointer argument <<
1680 Documentation/arch/arm64/tagged-add <<
1681 <<
1682 menuconfig COMPAT <<
1683 bool "Kernel support for 32-bit EL0" <<
1684 depends on ARM64_4K_PAGES || EXPERT <<
1685 select HAVE_UID16 <<
1686 select OLD_SIGSUSPEND3 <<
1687 select COMPAT_OLD_SIGACTION <<
1688 help <<
1689 This option enables support for a 3 <<
1690 kernel at EL1. AArch32-specific com <<
1691 the user helper functions, VFP supp <<
1692 handled appropriately by the kernel <<
1693 <<
1694 If you use a page size other than 4 <<
1695 that you will only be able to execu <<
1696 with page size aligned segments. <<
1697 <<
1698 If you want to execute 32-bit users <<
1699 <<
1700 if COMPAT <<
1701 <<
1702 config KUSER_HELPERS <<
1703 bool "Enable kuser helpers page for 3 <<
1704 default y <<
1705 help <<
1706 Warning: disabling this option may <<
1707 <<
1708 Provide kuser helpers to compat tas <<
1709 helper code to userspace in read on <<
1710 to allow userspace to be independen <<
1711 the system. This permits binaries t <<
1712 to ARMv8 without modification. <<
1713 <<
1714 See Documentation/arch/arm/kernel_u <<
1715 <<
1716 However, the fixed address nature o <<
1717 by ROP (return orientated programmi <<
1718 exploits. <<
1719 <<
1720 If all of the binaries and librarie <<
1721 are built specifically for your pla <<
1722 these helpers, then you can turn th <<
1723 such exploits. However, in that cas <<
1724 relying on those helpers is run, it <<
1725 <<
1726 Say N here only if you are absolute <<
1727 need these helpers; otherwise, the <<
1728 290
1729 config COMPAT_VDSO !! 291 config SCHED_SMT
1730 bool "Enable vDSO for 32-bit applicat !! 292 bool "SMT (Hyperthreading) scheduler support"
1731 depends on !CPU_BIG_ENDIAN !! 293 depends on SPARC64 && SMP
1732 depends on (CC_IS_CLANG && LD_IS_LLD) <<
1733 select GENERIC_COMPAT_VDSO <<
1734 default y 294 default y
1735 help 295 help
1736 Place in the process address space !! 296 SMT scheduler support improves the CPU scheduler's decision making
1737 ELF shared object providing fast im !! 297 when dealing with SPARC cpus at a cost of slightly increased overhead
1738 and clock_gettime. !! 298 in some places. If unsure say N here.
1739 299
1740 You must have a 32-bit build of gli !! 300 config SCHED_MC
1741 to seamlessly take advantage of thi !! 301 bool "Multi-core scheduler support"
1742 !! 302 depends on SPARC64 && SMP
1743 config THUMB2_COMPAT_VDSO <<
1744 bool "Compile the 32-bit vDSO for Thu <<
1745 depends on COMPAT_VDSO <<
1746 default y 303 default y
1747 help 304 help
1748 Compile the compat vDSO with '-mthu !! 305 Multi-core scheduler support improves the CPU scheduler's decision
1749 otherwise with '-marm'. !! 306 making when dealing with multi-core CPU chips at a cost of slightly
1750 !! 307 increased overhead in some places. If unsure say N here.
1751 config COMPAT_ALIGNMENT_FIXUPS <<
1752 bool "Fix up misaligned multi-word lo <<
1753 <<
1754 menuconfig ARMV8_DEPRECATED <<
1755 bool "Emulate deprecated/obsolete ARM <<
1756 depends on SYSCTL <<
1757 help <<
1758 Legacy software support may require <<
1759 that have been deprecated or obsole <<
1760 <<
1761 Enable this config to enable select <<
1762 features. <<
1763 <<
1764 If unsure, say Y <<
1765 <<
1766 if ARMV8_DEPRECATED <<
1767 <<
1768 config SWP_EMULATION <<
1769 bool "Emulate SWP/SWPB instructions" <<
1770 help <<
1771 ARMv8 obsoletes the use of A32 SWP/ <<
1772 they are always undefined. Say Y he <<
1773 emulation of these instructions for <<
1774 This feature can be controlled at r <<
1775 sysctl which is disabled by default <<
1776 <<
1777 In some older versions of glibc [<= <<
1778 trylock() operations with the assum <<
1779 be preempted. This invalid assumpti <<
1780 with SWP emulation enabled, leading <<
1781 application. <<
1782 <<
1783 NOTE: when accessing uncached share <<
1784 on an external transaction monitori <<
1785 monitor to maintain update atomicit <<
1786 implement a global monitor, this op <<
1787 perform SWP operations to uncached <<
1788 <<
1789 If unsure, say Y <<
1790 <<
1791 config CP15_BARRIER_EMULATION <<
1792 bool "Emulate CP15 Barrier instructio <<
1793 help <<
1794 The CP15 barrier instructions - CP1 <<
1795 CP15DMB - are deprecated in ARMv8 ( <<
1796 strongly recommended to use the ISB <<
1797 instructions instead. <<
1798 <<
1799 Say Y here to enable software emula <<
1800 instructions for AArch32 userspace <<
1801 enabled, CP15 barrier usage is trac <<
1802 identify software that needs updati <<
1803 controlled at runtime with the abi. <<
1804 308
1805 If unsure, say Y !! 309 config CMDLINE_BOOL
>> 310 bool "Default bootloader kernel arguments"
>> 311 depends on SPARC64
1806 312
1807 config SETEND_EMULATION !! 313 config CMDLINE
1808 bool "Emulate SETEND instruction" !! 314 string "Initial kernel command string"
>> 315 depends on CMDLINE_BOOL
>> 316 default "console=ttyS0,9600 root=/dev/sda1"
1809 help 317 help
1810 The SETEND instruction alters the d !! 318 Say Y here if you want to be able to pass default arguments to
1811 AArch32 EL0, and is deprecated in A !! 319 the kernel. This will be overridden by the bootloader, if you
1812 !! 320 use one (such as SILO). This is most useful if you want to boot
1813 Say Y here to enable software emula !! 321 a kernel from TFTP, and want default options to be available
1814 for AArch32 userspace code. This fe !! 322 with having them passed on the command line.
1815 at runtime with the abi.setend sysc <<
1816 323
1817 Note: All the cpus on the system mu !! 324 NOTE: This option WILL override the PROM bootargs setting!
1818 for this feature to be enabled. If <<
1819 endian - is hotplugged in after thi <<
1820 be unexpected results in the applic <<
1821 325
1822 If unsure, say Y !! 326 config SUN_PM
1823 endif # ARMV8_DEPRECATED !! 327 bool
1824 !! 328 default y if SPARC32
1825 endif # COMPAT <<
1826 <<
1827 menu "ARMv8.1 architectural features" <<
1828 <<
1829 config ARM64_HW_AFDBM <<
1830 bool "Support for hardware updates of <<
1831 default y <<
1832 help 329 help
1833 The ARMv8.1 architecture extensions !! 330 Enable power management and CPU standby features on supported
1834 hardware updates of the access and !! 331 SPARC platforms.
1835 table entries. When enabled in TCR_ <<
1836 capable processors, accesses to pag <<
1837 set this bit instead of raising an <<
1838 Similarly, writes to read-only page <<
1839 clear the read-only bit (AP[2]) ins <<
1840 permission fault. <<
1841 332
1842 Kernels built with this configurati !! 333 config SPARC_LED
1843 to work on pre-ARMv8.1 hardware and !! 334 tristate "Sun4m LED driver"
1844 minimal. If unsure, say Y. !! 335 depends on SPARC32
1845 <<
1846 config ARM64_PAN <<
1847 bool "Enable support for Privileged A <<
1848 default y <<
1849 help 336 help
1850 Privileged Access Never (PAN; part !! 337 This driver toggles the front-panel LED on sun4m systems
1851 prevents the kernel or hypervisor f !! 338 in a user-specifiable manner. Its state can be probed
1852 memory directly. !! 339 by reading /proc/led and its blinking mode can be changed
1853 !! 340 via writes to /proc/led
1854 Choosing this option will cause any <<
1855 copy_to_user et al) memory access t <<
1856 <<
1857 The feature is detected at runtime, <<
1858 instruction if the cpu does not imp <<
1859 <<
1860 config AS_HAS_LSE_ATOMICS <<
1861 def_bool $(as-instr,.arch_extension l <<
1862 341
1863 config ARM64_LSE_ATOMICS !! 342 config SERIAL_CONSOLE
1864 bool 343 bool
1865 default ARM64_USE_LSE_ATOMICS !! 344 depends on SPARC32
1866 depends on AS_HAS_LSE_ATOMICS <<
1867 <<
1868 config ARM64_USE_LSE_ATOMICS <<
1869 bool "Atomic instructions" <<
1870 default y 345 default y
1871 help 346 help
1872 As part of the Large System Extensi !! 347 If you say Y here, it will be possible to use a serial port as the
1873 atomic instructions that are design !! 348 system console (the system console is the device which receives all
1874 very large systems. !! 349 kernel messages and warnings and which allows logins in single user
1875 !! 350 mode). This could be useful if some terminal or printer is connected
1876 Say Y here to make use of these ins !! 351 to that serial port.
1877 atomic routines. This incurs a smal <<
1878 not support these instructions and <<
1879 built with binutils >= 2.25 in orde <<
1880 to be used. <<
1881 <<
1882 endmenu # "ARMv8.1 architectural features" <<
1883 352
1884 menu "ARMv8.2 architectural features" !! 353 Even if you say Y here, the currently visible virtual console
>> 354 (/dev/tty0) will still be used as the system console by default, but
>> 355 you can alter that using a kernel command line option such as
>> 356 "console=ttyS1". (Try "man bootparam" or see the documentation of
>> 357 your boot loader (silo) about how to pass options to the kernel at
>> 358 boot time.)
1885 359
1886 config AS_HAS_ARMV8_2 !! 360 If you don't have a graphics card installed and you say Y here, the
1887 def_bool $(cc-option,-Wa$(comma)-marc !! 361 kernel will automatically use the first serial line, /dev/ttyS0, as
1888 !! 362 system console.
1889 config AS_HAS_SHA3 <<
1890 def_bool $(as-instr,.arch armv8.2-a+s <<
1891 <<
1892 config ARM64_PMEM <<
1893 bool "Enable support for persistent m <<
1894 select ARCH_HAS_PMEM_API <<
1895 select ARCH_HAS_UACCESS_FLUSHCACHE <<
1896 help <<
1897 Say Y to enable support for the per <<
1898 ARMv8.2 DCPoP feature. <<
1899 363
1900 The feature is detected at runtime, !! 364 If unsure, say N.
1901 operations if DC CVAP is not suppor <<
1902 DC CVAP itself if the system does n <<
1903 365
1904 config ARM64_RAS_EXTN !! 366 config SPARC_LEON
1905 bool "Enable support for RAS CPU Exte !! 367 bool "Sparc Leon processor family"
1906 default y !! 368 depends on SPARC32
>> 369 select USB_EHCI_BIG_ENDIAN_MMIO
>> 370 select USB_EHCI_BIG_ENDIAN_DESC
>> 371 select USB_UHCI_BIG_ENDIAN_MMIO
>> 372 select USB_UHCI_BIG_ENDIAN_DESC
1907 help 373 help
1908 CPUs that support the Reliability, !! 374 If you say Y here if you are running on a SPARC-LEON processor.
1909 (RAS) Extensions, part of ARMv8.2 a !! 375 The LEON processor is a synthesizable VHDL model of the
1910 errors, classify them and report th !! 376 SPARC-v8 standard. LEON is part of the GRLIB collection of
1911 !! 377 IP cores that are distributed under GPL. GRLIB can be downloaded
1912 On CPUs with these extensions syste !! 378 from www.gaisler.com. You can download a sparc-linux cross-compilation
1913 barriers to determine if faults are !! 379 toolchain at www.gaisler.com.
1914 classification from a new set of re <<
1915 380
1916 Selecting this feature will allow t !! 381 if SPARC_LEON
1917 and access the new registers if the !! 382 menu "U-Boot options"
1918 Platform RAS features may additiona <<
1919 383
1920 config ARM64_CNP !! 384 config UBOOT_LOAD_ADDR
1921 bool "Enable support for Common Not P !! 385 hex "uImage Load Address"
1922 default y !! 386 default 0x40004000
1923 depends on ARM64_PAN || !ARM64_SW_TTB <<
1924 help 387 help
1925 Common Not Private (CNP) allows tra !! 388 U-Boot kernel load address, the address in physical address space
1926 be shared between different PEs in !! 389 where u-boot will place the Linux kernel before booting it.
1927 domain, so the hardware can use thi !! 390 This address is normally the base address of main memory + 0x4000.
1928 caching of such entries in the TLB. <<
1929 <<
1930 Selecting this option allows the CN <<
1931 at runtime, and does not affect PEs <<
1932 this feature. <<
1933 391
1934 endmenu # "ARMv8.2 architectural features" !! 392 config UBOOT_FLASH_ADDR
1935 !! 393 hex "uImage.o Load Address"
1936 menu "ARMv8.3 architectural features" !! 394 default 0x00080000
1937 <<
1938 config ARM64_PTR_AUTH <<
1939 bool "Enable support for pointer auth <<
1940 default y <<
1941 help 395 help
1942 Pointer authentication (part of the !! 396 Optional setting only affecting the uImage.o ELF-image used to
1943 instructions for signing and authen !! 397 download the uImage file to the target using a ELF-loader other than
1944 keys, which can be used to mitigate !! 398 U-Boot. It may for example be used to download an uImage to FLASH with
1945 and other attacks. !! 399 the GRMON utility before even starting u-boot.
1946 <<
1947 This option enables these instructi <<
1948 Choosing this option will cause the <<
1949 for each process at exec() time, wi <<
1950 context-switched along with the pro <<
1951 <<
1952 The feature is detected at runtime. <<
1953 hardware it will not be advertised <<
1954 be enabled. <<
1955 <<
1956 If the feature is present on the bo <<
1957 the late CPU will be parked. Also, <<
1958 address auth and the late CPU has t <<
1959 but with the feature disabled. On s <<
1960 not be selected. <<
1961 400
1962 config ARM64_PTR_AUTH_KERNEL !! 401 config UBOOT_ENTRY_ADDR
1963 bool "Use pointer authentication for !! 402 hex "uImage Entry Address"
1964 default y !! 403 default 0xf0004000
1965 depends on ARM64_PTR_AUTH <<
1966 depends on (CC_HAS_SIGN_RETURN_ADDRES <<
1967 # Modern compilers insert a .note.gnu <<
1968 # which is only understood by binutil <<
1969 depends on LD_IS_LLD || LD_VERSION >= <<
1970 depends on !CC_IS_CLANG || AS_HAS_CFI <<
1971 depends on (!FUNCTION_GRAPH_TRACER || <<
1972 help 404 help
1973 If the compiler supports the -mbran !! 405 Do not change this unless you know what you're doing. This is
1974 -msign-return-address flag (e.g. GC !! 406 hardcoded by the SPARC32 and LEON port.
1975 will cause the kernel itself to be <<
1976 protection. In this case, and if th <<
1977 support pointer authentication, the <<
1978 disabled with minimal loss of prote <<
1979 <<
1980 This feature works with FUNCTION_GR <<
1981 DYNAMIC_FTRACE_WITH_ARGS is enabled <<
1982 <<
1983 config CC_HAS_BRANCH_PROT_PAC_RET <<
1984 # GCC 9 or later, clang 8 or later <<
1985 def_bool $(cc-option,-mbranch-protect <<
1986 <<
1987 config CC_HAS_SIGN_RETURN_ADDRESS <<
1988 # GCC 7, 8 <<
1989 def_bool $(cc-option,-msign-return-ad <<
1990 <<
1991 config AS_HAS_ARMV8_3 <<
1992 def_bool $(cc-option,-Wa$(comma)-marc <<
1993 407
1994 config AS_HAS_CFI_NEGATE_RA_STATE !! 408 This is the virtual address u-boot jumps to when booting the Linux
1995 def_bool $(as-instr,.cfi_startproc\n. !! 409 Kernel.
1996 410
1997 config AS_HAS_LDAPR !! 411 endmenu
1998 def_bool $(as-instr,.arch_extension r !! 412 endif
1999 413
2000 endmenu # "ARMv8.3 architectural features" !! 414 endmenu
2001 415
2002 menu "ARMv8.4 architectural features" !! 416 menu "Bus options (PCI etc.)"
2003 !! 417 config SBUS
2004 config ARM64_AMU_EXTN !! 418 bool
2005 bool "Enable support for the Activity <<
2006 default y <<
2007 help <<
2008 The activity monitors extension is <<
2009 by the ARMv8.4 CPU architecture. Th <<
2010 of the activity monitors architectu <<
2011 <<
2012 To enable the use of this extension <<
2013 <<
2014 Note that for architectural reasons <<
2015 support when running on CPUs that p <<
2016 extension. The required support is <<
2017 * Version 1.5 and later of the AR <<
2018 <<
2019 For kernels that have this configur <<
2020 firmware, you may need to say N her <<
2021 Otherwise you may experience firmwa <<
2022 accessing the counter registers. Ev <<
2023 symptoms, the values returned by th <<
2024 correctly reflect reality. Most com <<
2025 indicating that the counter is not <<
2026 <<
2027 config AS_HAS_ARMV8_4 <<
2028 def_bool $(cc-option,-Wa$(comma)-marc <<
2029 <<
2030 config ARM64_TLB_RANGE <<
2031 bool "Enable support for tlbi range f <<
2032 default y 419 default y
2033 depends on AS_HAS_ARMV8_4 <<
2034 help <<
2035 ARMv8.4-TLBI provides TLBI invalida <<
2036 range of input addresses. <<
2037 <<
2038 The feature introduces new assembly <<
2039 support when binutils >= 2.30. <<
2040 420
2041 endmenu # "ARMv8.4 architectural features" !! 421 config SBUSCHAR
2042 !! 422 bool
2043 menu "ARMv8.5 architectural features" <<
2044 <<
2045 config AS_HAS_ARMV8_5 <<
2046 def_bool $(cc-option,-Wa$(comma)-marc <<
2047 <<
2048 config ARM64_BTI <<
2049 bool "Branch Target Identification su <<
2050 default y 423 default y
2051 help <<
2052 Branch Target Identification (part <<
2053 provides a mechanism to limit the s <<
2054 branch instructions such as BR or B <<
2055 424
2056 To make use of BTI on CPUs that sup !! 425 config SUN_LDOMS
2057 !! 426 bool "Sun Logical Domains support"
2058 BTI is intended to provide compleme !! 427 depends on SPARC64
2059 flow integrity protection mechanism <<
2060 authentication mechanism provided a <<
2061 For this reason, it does not make s <<
2062 also enabling support for pointer a <<
2063 enabling this option you should als <<
2064 <<
2065 Userspace binaries must also be spe <<
2066 this mechanism. If you say N here <<
2067 BTI, such binaries can still run, b <<
2068 enforcement of branch destinations. <<
2069 <<
2070 config ARM64_BTI_KERNEL <<
2071 bool "Use Branch Target Identificatio <<
2072 default y <<
2073 depends on ARM64_BTI <<
2074 depends on ARM64_PTR_AUTH_KERNEL <<
2075 depends on CC_HAS_BRANCH_PROT_PAC_RET <<
2076 # https://gcc.gnu.org/bugzilla/show_b <<
2077 depends on !CC_IS_GCC || GCC_VERSION <<
2078 # https://gcc.gnu.org/bugzilla/show_b <<
2079 depends on !CC_IS_GCC <<
2080 depends on (!FUNCTION_GRAPH_TRACER || <<
2081 help 428 help
2082 Build the kernel with Branch Target !! 429 Say Y here is you want to support virtual devices via
2083 and enable enforcement of this for !! 430 Logical Domains.
2084 is enabled and the system supports <<
2085 modular code must have BTI enabled. <<
2086 <<
2087 config CC_HAS_BRANCH_PROT_PAC_RET_BTI <<
2088 # GCC 9 or later, clang 8 or later <<
2089 def_bool $(cc-option,-mbranch-protect <<
2090 431
2091 config ARM64_E0PD !! 432 config PCIC_PCI
2092 bool "Enable support for E0PD" !! 433 bool
>> 434 depends on PCI && SPARC32 && !SPARC_LEON
2093 default y 435 default y
2094 help <<
2095 E0PD (part of the ARMv8.5 extension <<
2096 that EL0 accesses made via TTBR1 al <<
2097 providing similar benefits to KASLR <<
2098 with lower overhead and without dis <<
2099 kernel memory such as SPE. <<
2100 <<
2101 This option enables E0PD for TTBR1 <<
2102 436
2103 config ARM64_AS_HAS_MTE !! 437 config LEON_PCI
2104 # Initial support for MTE went in bin !! 438 bool
2105 # ".arch armv8.5-a+memtag" below. How !! 439 depends on PCI && SPARC_LEON
2106 # as a late addition to the final arc <<
2107 # is only supported in the newer 2.32 <<
2108 # versions, hence the extra "stgm" in <<
2109 def_bool $(as-instr,.arch armv8.5-a+m <<
2110 <<
2111 config ARM64_MTE <<
2112 bool "Memory Tagging Extension suppor <<
2113 default y 440 default y
2114 depends on ARM64_AS_HAS_MTE && ARM64_ <<
2115 depends on AS_HAS_ARMV8_5 <<
2116 depends on AS_HAS_LSE_ATOMICS <<
2117 # Required for tag checking in the ua <<
2118 depends on ARM64_PAN <<
2119 select ARCH_HAS_SUBPAGE_FAULTS <<
2120 select ARCH_USES_HIGH_VMA_FLAGS <<
2121 select ARCH_USES_PG_ARCH_2 <<
2122 select ARCH_USES_PG_ARCH_3 <<
2123 help <<
2124 Memory Tagging (part of the ARMv8.5 <<
2125 architectural support for run-time, <<
2126 various classes of memory error to <<
2127 to eliminate vulnerabilities arisin <<
2128 languages. <<
2129 <<
2130 This option enables the support for <<
2131 Extension at EL0 (i.e. for userspac <<
2132 <<
2133 Selecting this option allows the fe <<
2134 runtime. Any secondary CPU not impl <<
2135 not be allowed a late bring-up. <<
2136 <<
2137 Userspace binaries that want to use <<
2138 explicitly opt in. The mechanism fo <<
2139 described in: <<
2140 <<
2141 Documentation/arch/arm64/memory-tag <<
2142 <<
2143 endmenu # "ARMv8.5 architectural features" <<
2144 441
2145 menu "ARMv8.7 architectural features" !! 442 config SPARC_GRPCI1
2146 !! 443 bool "GRPCI Host Bridge Support"
2147 config ARM64_EPAN !! 444 depends on LEON_PCI
2148 bool "Enable support for Enhanced Pri <<
2149 default y 445 default y
2150 depends on ARM64_PAN <<
2151 help <<
2152 Enhanced Privileged Access Never (E <<
2153 Access Never to be used with Execut <<
2154 <<
2155 The feature is detected at runtime, <<
2156 if the cpu does not implement the f <<
2157 endmenu # "ARMv8.7 architectural features" <<
2158 <<
2159 menu "ARMv8.9 architectural features" <<
2160 <<
2161 config ARM64_POE <<
2162 prompt "Permission Overlay Extension" <<
2163 def_bool y <<
2164 select ARCH_USES_HIGH_VMA_FLAGS <<
2165 select ARCH_HAS_PKEYS <<
2166 help 446 help
2167 The Permission Overlay Extension is !! 447 Say Y here to include the GRPCI Host Bridge Driver. The GRPCI
2168 Protection Keys. Memory Protection !! 448 PCI host controller is typically found in GRLIB SPARC32/LEON
2169 enforcing page-based protections, b !! 449 systems. The driver has one property (all_pci_errors) controlled
2170 of the page tables when an applicat !! 450 from the bootloader that makes the GRPCI to generate interrupts
2171 !! 451 on detected PCI Parity and System errors.
2172 For details, see Documentation/core <<
2173 <<
2174 If unsure, say y. <<
2175 <<
2176 config ARCH_PKEY_BITS <<
2177 int <<
2178 default 3 <<
2179 <<
2180 endmenu # "ARMv8.9 architectural features" <<
2181 452
2182 config ARM64_SVE !! 453 config SPARC_GRPCI2
2183 bool "ARM Scalable Vector Extension s !! 454 bool "GRPCI2 Host Bridge Support"
>> 455 depends on LEON_PCI
2184 default y 456 default y
2185 help 457 help
2186 The Scalable Vector Extension (SVE) !! 458 Say Y here to include the GRPCI2 Host Bridge Driver.
2187 execution state which complements a <<
2188 of the base architecture to support <<
2189 additional vectorisation opportunit <<
2190 459
2191 To enable use of this extension on !! 460 config SUN_OPENPROMFS
2192 !! 461 tristate "Openprom tree appears in /proc/openprom"
2193 On CPUs that support the SVE2 exten <<
2194 those too. <<
2195 <<
2196 Note that for architectural reasons <<
2197 support when running on SVE capable <<
2198 is present in: <<
2199 <<
2200 * version 1.5 and later of the AR <<
2201 * the AArch64 boot wrapper since <<
2202 ("bootwrapper: SVE: Enable SVE <<
2203 <<
2204 For other firmware implementations, <<
2205 or vendor. <<
2206 <<
2207 If you need the kernel to boot on S <<
2208 firmware, you may need to say N her <<
2209 fixed. Otherwise, you may experien <<
2210 booting the kernel. If unsure and <<
2211 symptoms, you should assume that it <<
2212 <<
2213 config ARM64_SME <<
2214 bool "ARM Scalable Matrix Extension s <<
2215 default y <<
2216 depends on ARM64_SVE <<
2217 depends on BROKEN <<
2218 help <<
2219 The Scalable Matrix Extension (SME) <<
2220 execution state which utilises a su <<
2221 instruction set, together with the <<
2222 register state capable of holding t <<
2223 enable various matrix operations. <<
2224 <<
2225 config ARM64_PSEUDO_NMI <<
2226 bool "Support for NMI-like interrupts <<
2227 select ARM_GIC_V3 <<
2228 help 462 help
2229 Adds support for mimicking Non-Mask !! 463 If you say Y, the OpenPROM device tree will be available as a
2230 GIC interrupt priority. This suppor !! 464 virtual file system, which you can mount to /proc/openprom by "mount
2231 ARM GIC. !! 465 -t openpromfs none /proc/openprom".
2232 466
2233 This high priority configuration fo !! 467 To compile the /proc/openprom support as a module, choose M here: the
2234 explicitly enabled by setting the k !! 468 module will be called openpromfs.
2235 "irqchip.gicv3_pseudo_nmi" to 1. <<
2236 469
2237 If unsure, say N !! 470 Only choose N if you know in advance that you will not need to modify
2238 !! 471 OpenPROM settings on the running system.
2239 if ARM64_PSEUDO_NMI <<
2240 config ARM64_DEBUG_PRIORITY_MASKING <<
2241 bool "Debug interrupt priority maskin <<
2242 help <<
2243 This adds runtime checks to functio <<
2244 interrupts when using priority mask <<
2245 the validity of ICC_PMR_EL1 when ca <<
2246 472
2247 If unsure, say N !! 473 # Makefile helpers
2248 endif # ARM64_PSEUDO_NMI !! 474 config SPARC64_PCI
2249 !! 475 bool
2250 config RELOCATABLE <<
2251 bool "Build a relocatable kernel imag <<
2252 select ARCH_HAS_RELR <<
2253 default y 476 default y
2254 help !! 477 depends on SPARC64 && PCI
2255 This builds the kernel as a Positio <<
2256 which retains all relocation metada <<
2257 kernel binary at runtime to a diffe <<
2258 address it was linked at. <<
2259 Since AArch64 uses the RELA relocat <<
2260 relocation pass at runtime even if <<
2261 same address it was linked at. <<
2262 <<
2263 config RANDOMIZE_BASE <<
2264 bool "Randomize the address of the ke <<
2265 select RELOCATABLE <<
2266 help <<
2267 Randomizes the virtual address at w <<
2268 loaded, as a security feature that <<
2269 relying on knowledge of the locatio <<
2270 <<
2271 It is the bootloader's job to provi <<
2272 random u64 value in /chosen/kaslr-s <<
2273 <<
2274 When booting via the UEFI stub, it <<
2275 EFI_RNG_PROTOCOL implementation (if <<
2276 to the kernel proper. In addition, <<
2277 location of the kernel Image as wel <<
2278 <<
2279 If unsure, say N. <<
2280 <<
2281 config RANDOMIZE_MODULE_REGION_FULL <<
2282 bool "Randomize the module region ove <<
2283 depends on RANDOMIZE_BASE <<
2284 default y <<
2285 help <<
2286 Randomizes the location of the modu <<
2287 covering the core kernel. This way, <<
2288 to leak information about the locat <<
2289 but it does imply that function cal <<
2290 kernel will need to be resolved via <<
2291 <<
2292 When this option is not set, the mo <<
2293 a limited range that contains the [ <<
2294 core kernel, so branch relocations <<
2295 the region is exhausted. In this pa <<
2296 exhaustion, modules might be able t <<
2297 478
2298 config CC_HAVE_STACKPROTECTOR_SYSREG !! 479 config SPARC64_PCI_MSI
2299 def_bool $(cc-option,-mstack-protecto <<
2300 <<
2301 config STACKPROTECTOR_PER_TASK <<
2302 def_bool y <<
2303 depends on STACKPROTECTOR && CC_HAVE_ <<
2304 <<
2305 config UNWIND_PATCH_PAC_INTO_SCS <<
2306 bool "Enable shadow call stack dynami <<
2307 # needs Clang with https://github.com <<
2308 depends on CC_IS_CLANG && CLANG_VERSI <<
2309 depends on ARM64_PTR_AUTH_KERNEL && C <<
2310 depends on SHADOW_CALL_STACK <<
2311 select UNWIND_TABLES <<
2312 select DYNAMIC_SCS <<
2313 <<
2314 config ARM64_CONTPTE <<
2315 bool "Contiguous PTE mappings for use <<
2316 depends on TRANSPARENT_HUGEPAGE <<
2317 default y <<
2318 help <<
2319 When enabled, user mappings are con <<
2320 bit, for any mappings that meet the <<
2321 This reduces TLB pressure and impro <<
2322 <<
2323 endmenu # "Kernel Features" <<
2324 <<
2325 menu "Boot options" <<
2326 <<
2327 config ARM64_ACPI_PARKING_PROTOCOL <<
2328 bool "Enable support for the ARM64 AC <<
2329 depends on ACPI <<
2330 help <<
2331 Enable support for the ARM64 ACPI p <<
2332 the kernel will not allow booting t <<
2333 protocol even if the corresponding <<
2334 MADT table. <<
2335 <<
2336 config CMDLINE <<
2337 string "Default kernel command string <<
2338 default "" <<
2339 help <<
2340 Provide a set of default command-li <<
2341 entering them here. As a minimum, y <<
2342 root device (e.g. root=/dev/nfs). <<
2343 <<
2344 choice <<
2345 prompt "Kernel command line type" <<
2346 depends on CMDLINE != "" <<
2347 default CMDLINE_FROM_BOOTLOADER <<
2348 help <<
2349 Choose how the kernel will handle t <<
2350 command line string. <<
2351 <<
2352 config CMDLINE_FROM_BOOTLOADER <<
2353 bool "Use bootloader kernel arguments <<
2354 help <<
2355 Uses the command-line options passe <<
2356 the boot loader doesn't provide any <<
2357 string provided in CMDLINE will be <<
2358 <<
2359 config CMDLINE_FORCE <<
2360 bool "Always use the default kernel c <<
2361 help <<
2362 Always use the default kernel comma <<
2363 loader passes other arguments to th <<
2364 This is useful if you cannot or don <<
2365 command-line options your boot load <<
2366 <<
2367 endchoice <<
2368 <<
2369 config EFI_STUB <<
2370 bool 480 bool
2371 <<
2372 config EFI <<
2373 bool "UEFI runtime support" <<
2374 depends on OF && !CPU_BIG_ENDIAN <<
2375 depends on KERNEL_MODE_NEON <<
2376 select ARCH_SUPPORTS_ACPI <<
2377 select LIBFDT <<
2378 select UCS2_STRING <<
2379 select EFI_PARAMS_FROM_FDT <<
2380 select EFI_RUNTIME_WRAPPERS <<
2381 select EFI_STUB <<
2382 select EFI_GENERIC_STUB <<
2383 imply IMA_SECURE_AND_OR_TRUSTED_BOOT <<
2384 default y 481 default y
2385 help !! 482 depends on SPARC64_PCI && PCI_MSI
2386 This option provides support for ru <<
2387 by UEFI firmware (such as non-volat <<
2388 clock, and platform reset). A UEFI <<
2389 allow the kernel to be booted as an <<
2390 is only useful on systems that have <<
2391 483
2392 config COMPRESSED_INSTALL !! 484 endmenu
2393 bool "Install compressed image by def <<
2394 help <<
2395 This makes the regular "make instal <<
2396 image we built, not the legacy unco <<
2397 <<
2398 You can check that a compressed ima <<
2399 "make zinstall" first, and verifyin <<
2400 in your environment before making " <<
2401 you. <<
2402 485
2403 config DMI !! 486 config COMPAT
2404 bool "Enable support for SMBIOS (DMI) !! 487 bool
2405 depends on EFI !! 488 depends on SPARC64
2406 default y 489 default y
2407 help !! 490 select HAVE_UID16
2408 This enables SMBIOS/DMI feature for !! 491 select ARCH_WANT_OLD_COMPAT_IPC
2409 !! 492 select COMPAT_OLD_SIGACTION
2410 This option is only useful on syste <<
2411 However, even with this option, the <<
2412 continue to boot on existing non-UE <<
2413 <<
2414 endmenu # "Boot options" <<
2415 <<
2416 menu "Power management options" <<
2417 <<
2418 source "kernel/power/Kconfig" <<
2419 <<
2420 config ARCH_HIBERNATION_POSSIBLE <<
2421 def_bool y <<
2422 depends on CPU_PM <<
2423 <<
2424 config ARCH_HIBERNATION_HEADER <<
2425 def_bool y <<
2426 depends on HIBERNATION <<
2427 <<
2428 config ARCH_SUSPEND_POSSIBLE <<
2429 def_bool y <<
2430 <<
2431 endmenu # "Power management options" <<
2432 <<
2433 menu "CPU Power Management" <<
2434 <<
2435 source "drivers/cpuidle/Kconfig" <<
2436 <<
2437 source "drivers/cpufreq/Kconfig" <<
2438 <<
2439 endmenu # "CPU Power Management" <<
2440 <<
2441 source "drivers/acpi/Kconfig" <<
2442 <<
2443 source "arch/arm64/kvm/Kconfig" <<
2444 493
>> 494 source "drivers/sbus/char/Kconfig"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.