1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 // Copyright (C) 2018 Amarula Solutions B.V.
3 // Author: Jagan Teki <jagan@amarulasolutions.c
4
5 /dts-v1/;
6
7 #include "sun50i-a64.dtsi"
8 #include "sun50i-a64-cpu-opp.dtsi"
9
10 #include <dt-bindings/gpio/gpio.h>
11
12 / {
13 model = "Amarula A64-Relic";
14 compatible = "amarula,a64-relic", "all
15
16 aliases {
17 serial0 = &uart0;
18 };
19
20 chosen {
21 stdout-path = "serial0:115200n
22 };
23
24 i2c {
25 compatible = "i2c-gpio";
26 sda-gpios = <&pio 4 13 GPIO_AC
27 scl-gpios = <&pio 4 12 GPIO_AC
28 i2c-gpio,delay-us = <5>;
29 #address-cells = <1>;
30 #size-cells = <0>;
31
32 ov5640: camera@3c {
33 compatible = "ovti,ov5
34 reg = <0x3c>;
35 pinctrl-names = "defau
36 pinctrl-0 = <&csi_mclk
37 clocks = <&ccu CLK_CSI
38 clock-names = "xclk";
39
40 AVDD-supply = <®_al
41 DOVDD-supply = <®_d
42 DVDD-supply = <®_el
43 reset-gpios = <&pio 4
44 powerdown-gpios = <&pi
45
46 port {
47 ov5640_ep: end
48 remote
49 bus-wi
50 hsync-
51 vsync-
52 data-a
53 pclk-s
54 };
55 };
56 };
57 };
58
59 wifi_pwrseq: wifi-pwrseq {
60 compatible = "mmc-pwrseq-simpl
61 clocks = <&rtc CLK_OSC32K_FANO
62 clock-names = "ext_clock";
63 reset-gpios = <&r_pio 0 2 GPIO
64 };
65 };
66
67 &cpu0 {
68 cpu-supply = <®_dcdc2>;
69 };
70
71 &cpu1 {
72 cpu-supply = <®_dcdc2>;
73 };
74
75 &cpu2 {
76 cpu-supply = <®_dcdc2>;
77 };
78
79 &cpu3 {
80 cpu-supply = <®_dcdc2>;
81 };
82
83 &csi {
84 status = "okay";
85
86 port {
87 csi_ep: endpoint {
88 remote-endpoint = <&ov
89 bus-width = <8>;
90 hsync-active = <1>; /*
91 vsync-active = <0>; /*
92 data-active = <1>; /*
93 pclk-sample = <1>; /*
94 };
95 };
96 };
97
98 &ehci0 {
99 status = "okay";
100 };
101
102 &i2c0 {
103 status = "okay";
104
105 sensor@48 {
106 compatible = "st,stlm75";
107 reg = <0x48>;
108 };
109 };
110
111 &i2c0_pins {
112 bias-pull-up;
113 };
114
115 &i2c1 {
116 status = "okay";
117
118 touchscreen@5d {
119 compatible = "goodix,gt5663";
120 reg = <0x5d>;
121 AVDD28-supply = <®_ldo_io0>
122 interrupt-parent = <&pio>;
123 interrupts = <7 4 IRQ_TYPE_EDG
124 irq-gpios = <&pio 7 4 GPIO_ACT
125 reset-gpios = <&pio 7 8 GPIO_A
126 touchscreen-inverted-x;
127 touchscreen-inverted-y;
128 };
129 };
130
131 &mmc1 {
132 pinctrl-names = "default";
133 pinctrl-0 = <&mmc1_pins>;
134 vmmc-supply = <®_dcdc1>;
135 /*
136 * Schematic shows both dldo4 and eldo
137 * dldo4 connection shows DNP(Do Not P
138 * 0Ohm register to vcc-io-wifi so eld
139 */
140 vqmmc-supply = <®_eldo1>;
141 mmc-pwrseq = <&wifi_pwrseq>;
142 bus-width = <4>;
143 non-removable;
144 status = "okay";
145
146 brcmf: wifi@1 {
147 reg = <1>;
148 compatible = "brcm,bcm4329-fma
149 interrupt-parent = <&r_pio>;
150 interrupts = <0 3 IRQ_TYPE_LEV
151 interrupt-names = "host-wake";
152 };
153 };
154
155 &mmc2 {
156 pinctrl-names = "default";
157 pinctrl-0 = <&mmc2_pins>;
158 vmmc-supply = <®_dcdc1>;
159 bus-width = <8>;
160 non-removable;
161 cap-mmc-hw-reset;
162 status = "okay";
163 };
164
165 &ohci0 {
166 status = "okay";
167 };
168
169 &r_rsb {
170 status = "okay";
171
172 axp803: pmic@3a3 {
173 compatible = "x-powers,axp803"
174 reg = <0x3a3>;
175 interrupt-parent = <&r_intc>;
176 interrupts = <GIC_SPI 32 IRQ_T
177 x-powers,drive-vbus-en; /* set
178 };
179 };
180
181 #include "axp803.dtsi"
182
183 ®_aldo1 {
184 regulator-always-on;
185 regulator-min-microvolt = <2800000>;
186 regulator-max-microvolt = <2800000>;
187 regulator-name = "avdd-csi";
188 };
189
190 ®_aldo2 {
191 regulator-always-on;
192 regulator-min-microvolt = <1800000>;
193 regulator-max-microvolt = <3300000>;
194 regulator-name = "vcc-pl";
195 };
196
197 ®_aldo3 {
198 regulator-always-on;
199 regulator-min-microvolt = <3000000>;
200 regulator-max-microvolt = <3000000>;
201 regulator-name = "vcc-pll-avcc";
202 };
203
204 ®_dcdc1 {
205 regulator-always-on;
206 regulator-min-microvolt = <3300000>;
207 regulator-max-microvolt = <3300000>;
208 regulator-name = "vcc-3v3";
209 };
210
211 ®_dcdc2 {
212 regulator-always-on;
213 regulator-min-microvolt = <1040000>;
214 regulator-max-microvolt = <1300000>;
215 regulator-name = "vdd-cpux";
216 };
217
218 /* DCDC3 is polyphased with DCDC2 */
219
220 ®_dcdc5 {
221 regulator-always-on;
222 regulator-min-microvolt = <1500000>;
223 regulator-max-microvolt = <1500000>;
224 regulator-name = "vcc-dram";
225 };
226
227 ®_dcdc6 {
228 regulator-always-on;
229 regulator-min-microvolt = <1100000>;
230 regulator-max-microvolt = <1100000>;
231 regulator-name = "vdd-sys";
232 };
233
234 ®_dldo1 {
235 regulator-min-microvolt = <3300000>;
236 regulator-max-microvolt = <3300000>;
237 regulator-name = "vcc-hdmi-dsi-sensor"
238 };
239
240 ®_dldo2 {
241 regulator-min-microvolt = <3300000>;
242 regulator-max-microvolt = <3300000>;
243 regulator-name = "vcc-mipi";
244 };
245
246 ®_dldo3 {
247 regulator-min-microvolt = <2800000>;
248 regulator-max-microvolt = <2800000>;
249 regulator-name = "dovdd-csi";
250 };
251
252 ®_dldo4 {
253 regulator-min-microvolt = <3300000>;
254 regulator-max-microvolt = <3300000>;
255 regulator-name = "vcc-wifi-io";
256 };
257
258 ®_drivevbus {
259 regulator-name = "usb0-vbus";
260 status = "okay";
261 };
262
263 ®_eldo1 {
264 regulator-always-on;
265 regulator-min-microvolt = <1800000>;
266 regulator-max-microvolt = <1800000>;
267 regulator-name = "cpvdd";
268 };
269
270 ®_eldo3 {
271 regulator-min-microvolt = <1800000>;
272 regulator-max-microvolt = <1800000>;
273 regulator-name = "dvdd-csi";
274 };
275
276 ®_fldo1 {
277 regulator-min-microvolt = <1200000>;
278 regulator-max-microvolt = <1200000>;
279 regulator-name = "vcc-1v2-hsic";
280 };
281
282 /*
283 * The A64 chip cannot work without this regul
284 * it seems to be only driving the AR100 core.
285 * Maybe we don't still know well about CPUs d
286 */
287 ®_fldo2 {
288 regulator-always-on;
289 regulator-min-microvolt = <1100000>;
290 regulator-max-microvolt = <1100000>;
291 regulator-name = "vdd-cpus";
292 };
293
294 ®_ldo_io0 {
295 regulator-min-microvolt = <2800000>;
296 regulator-max-microvolt = <2800000>;
297 regulator-name = "vcc-ctp";
298 status = "okay";
299 };
300
301 ®_rtc_ldo {
302 regulator-name = "vcc-rtc";
303 };
304
305 &uart0 {
306 pinctrl-names = "default";
307 pinctrl-0 = <&uart0_pb_pins>;
308 status = "okay";
309 };
310
311 &usb_otg {
312 dr_mode = "otg";
313 status = "okay";
314 };
315
316 &usbphy {
317 usb0_id_det-gpios = <&pio 7 9 GPIO_ACT
318 usb0_vbus-supply = <®_drivevbus>;
319 status = "okay";
320 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.