1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 // Copyright (c) 2017 Icenowy Zheng <icenowy@ao
3
4 /dts-v1/;
5
6 #include "sun50i-h6.dtsi"
7 #include "sun50i-h6-cpu-opp.dtsi"
8
9 #include <dt-bindings/gpio/gpio.h>
10
11 / {
12 model = "Pine64 PINE H64 Model A";
13 compatible = "pine64,pine-h64", "allwi
14
15 aliases {
16 ethernet0 = &emac;
17 serial0 = &uart0;
18 spi0 = &spi0;
19 };
20
21 chosen {
22 stdout-path = "serial0:115200n
23 };
24
25 ext_osc32k: ext-osc32k-clk {
26 #clock-cells = <0>;
27 compatible = "fixed-clock";
28 clock-frequency = <32768>;
29 clock-output-names = "ext_osc3
30 };
31
32 hdmi_connector: connector {
33 compatible = "hdmi-connector";
34 type = "a";
35 ddc-en-gpios = <&pio 7 2 GPIO_
36
37 port {
38 hdmi_con_in: endpoint
39 remote-endpoin
40 };
41 };
42 };
43
44 leds {
45 compatible = "gpio-leds";
46
47 led-0 {
48 label = "pine-h64:gree
49 gpios = <&r_pio 0 4 GP
50 };
51
52 led-1 {
53 label = "pine-h64:whit
54 gpios = <&r_pio 0 3 GP
55 };
56
57 led-2 {
58 label = "pine-h64:blue
59 gpios = <&r_pio 0 7 GP
60 };
61 };
62
63 reg_gmac_3v3: gmac-3v3 {
64 compatible = "regulator-fixed"
65 regulator-name = "vcc-gmac-3v3
66 regulator-min-microvolt = <330
67 regulator-max-microvolt = <330
68 startup-delay-us = <100000>;
69 gpio = <&pio 2 16 GPIO_ACTIVE_
70 enable-active-high;
71 };
72
73 reg_usb_vbus: vbus {
74 compatible = "regulator-fixed"
75 regulator-name = "usb-vbus";
76 regulator-min-microvolt = <500
77 regulator-max-microvolt = <500
78 startup-delay-us = <100000>;
79 gpio = <&r_pio 0 5 GPIO_ACTIVE
80 enable-active-high;
81 };
82 };
83
84 &cpu0 {
85 cpu-supply = <®_dcdca>;
86 };
87
88 &de {
89 status = "okay";
90 };
91
92 &ehci0 {
93 status = "okay";
94 };
95
96 &ehci3 {
97 status = "okay";
98 };
99
100 &emac {
101 pinctrl-names = "default";
102 pinctrl-0 = <&ext_rgmii_pins>;
103 phy-mode = "rgmii-id";
104 phy-handle = <&ext_rgmii_phy>;
105 phy-supply = <®_gmac_3v3>;
106 allwinner,rx-delay-ps = <200>;
107 allwinner,tx-delay-ps = <200>;
108 status = "okay";
109 };
110
111 &gpu {
112 mali-supply = <®_dcdcc>;
113 status = "okay";
114 };
115
116 &hdmi {
117 status = "okay";
118 };
119
120 &hdmi_out {
121 hdmi_out_con: endpoint {
122 remote-endpoint = <&hdmi_con_i
123 };
124 };
125
126 &mdio {
127 ext_rgmii_phy: ethernet-phy@1 {
128 compatible = "ethernet-phy-iee
129 reg = <1>;
130 };
131 };
132
133 &mmc0 {
134 vmmc-supply = <®_cldo1>;
135 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
136 bus-width = <4>;
137 status = "okay";
138 };
139
140 &mmc2 {
141 vmmc-supply = <®_cldo1>;
142 vqmmc-supply = <®_bldo2>;
143 non-removable;
144 cap-mmc-hw-reset;
145 mmc-hs200-1_8v;
146 bus-width = <8>;
147 status = "okay";
148 };
149
150 &ohci0 {
151 status = "okay";
152 };
153
154 &ohci3 {
155 status = "okay";
156 };
157
158 &pio {
159 vcc-pc-supply = <®_bldo2>;
160 vcc-pd-supply = <®_cldo1>;
161 vcc-pg-supply = <®_aldo1>;
162 };
163
164 &r_i2c {
165 status = "okay";
166
167 axp805: pmic@36 {
168 compatible = "x-powers,axp805"
169 reg = <0x36>;
170 interrupt-parent = <&r_intc>;
171 interrupts = <GIC_SPI 96 IRQ_T
172 interrupt-controller;
173 #interrupt-cells = <1>;
174 x-powers,self-working-mode;
175
176 regulators {
177 reg_aldo1: aldo1 {
178 regulator-alwa
179 regulator-min-
180 regulator-max-
181 regulator-name
182 };
183
184 reg_aldo2: aldo2 {
185 regulator-min-
186 regulator-max-
187 regulator-name
188 regulator-enab
189 };
190
191 reg_aldo3: aldo3 {
192 /* This regula
193 regulator-alwa
194 regulator-min-
195 regulator-max-
196 regulator-name
197 };
198
199 reg_bldo1: bldo1 {
200 regulator-alwa
201 regulator-min-
202 regulator-max-
203 regulator-name
204 };
205
206 reg_bldo2: bldo2 {
207 regulator-alwa
208 regulator-min-
209 regulator-max-
210 regulator-name
211 };
212
213 reg_bldo3: bldo3 {
214 regulator-alwa
215 regulator-min-
216 regulator-max-
217 regulator-name
218 };
219
220 bldo4 {
221 /* unused */
222 };
223
224 reg_cldo1: cldo1 {
225 /* This regula
226 regulator-alwa
227 regulator-min-
228 regulator-max-
229 regulator-name
230 };
231
232 reg_cldo2: cldo2 {
233 regulator-min-
234 regulator-max-
235 regulator-name
236 };
237
238 reg_cldo3: cldo3 {
239 regulator-min-
240 regulator-max-
241 regulator-name
242 };
243
244 reg_dcdca: dcdca {
245 regulator-alwa
246 regulator-min-
247 regulator-max-
248 regulator-ramp
249 regulator-name
250 };
251
252 reg_dcdcc: dcdcc {
253 regulator-enab
254 regulator-min-
255 regulator-max-
256 regulator-ramp
257 regulator-name
258 };
259
260 reg_dcdcd: dcdcd {
261 regulator-alwa
262 regulator-min-
263 regulator-max-
264 regulator-name
265 };
266
267 reg_dcdce: dcdce {
268 regulator-alwa
269 regulator-min-
270 regulator-max-
271 regulator-name
272 };
273
274 sw {
275 /* unused */
276 };
277 };
278 };
279
280 pcf8563: rtc@51 {
281 compatible = "nxp,pcf8563";
282 reg = <0x51>;
283 interrupt-parent = <&r_intc>;
284 interrupts = <GIC_SPI 96 IRQ_T
285 #clock-cells = <0>;
286 };
287 };
288
289 &r_ir {
290 status = "okay";
291 };
292
293 &r_pio {
294 vcc-pm-supply = <®_aldo1>;
295 };
296
297 &rtc {
298 clocks = <&ext_osc32k>;
299 };
300
301 /*
302 * The CS pin is shared with the MMC2 CMD pin,
303 * flash and eMMC at the same time, as one of
304 * Disable SPI0 in here, to prefer the more us
305 * fix this up in no eMMC is connected.
306 */
307 &spi0 {
308 pinctrl-0 = <&spi0_pins>, <&spi0_cs_pi
309 pinctrl-names = "default";
310 status = "disabled";
311
312 flash@0 {
313 compatible = "winbond,w25q128"
314 reg = <0>;
315 spi-max-frequency = <4000000>;
316 };
317 };
318
319 &uart0 {
320 pinctrl-names = "default";
321 pinctrl-0 = <&uart0_ph_pins>;
322 status = "okay";
323 };
324
325 &usb2otg {
326 dr_mode = "host";
327 status = "okay";
328 };
329
330 &usb2phy {
331 usb0_vbus-supply = <®_usb_vbus>;
332 usb3_vbus-supply = <®_usb_vbus>;
333 status = "okay";
334 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.