1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2016 Endless Computers, Inc.
4 * Author: Carlo Caione <carlo@endlessm.com>
5 */
6
7 /* Common DTSI for same Amlogic Q200/Q201 and
8 * the pin-compatible S912 (GXM) or S905D (GXL
9 */
10
11 #include <dt-bindings/sound/meson-aiu.h>
12
13 / {
14 aliases {
15 serial0 = &uart_AO;
16 ethernet0 = ðmac;
17 };
18
19 dio2133: analog-amplifier {
20 compatible = "simple-audio-amp
21 sound-name-prefix = "AU2";
22 VCC-supply = <&hdmi_5v>;
23 enable-gpios = <&gpio GPIOH_5
24 };
25
26 spdif_dit: audio-codec-0 {
27 #sound-dai-cells = <0>;
28 compatible = "linux,spdif-dit"
29 sound-name-prefix = "DIT";
30 };
31
32 chosen {
33 stdout-path = "serial0:115200n
34 };
35
36 memory@0 {
37 device_type = "memory";
38 reg = <0x0 0x0 0x0 0x80000000>
39 };
40
41 hdmi_5v: regulator-hdmi-5v {
42 compatible = "regulator-fixed"
43
44 regulator-name = "HDMI_5V";
45 regulator-min-microvolt = <500
46 regulator-max-microvolt = <500
47
48 gpio = <&gpio GPIOH_3 GPIO_ACT
49 enable-active-high;
50 regulator-always-on;
51 };
52
53 vddio_ao18: regulator-vddio-ao18 {
54 compatible = "regulator-fixed"
55 regulator-name = "VDDIO_AO18";
56 regulator-min-microvolt = <180
57 regulator-max-microvolt = <180
58 };
59
60 vddio_boot: regulator-vddio-boot {
61 compatible = "regulator-fixed"
62 regulator-name = "VDDIO_BOOT";
63 regulator-min-microvolt = <180
64 regulator-max-microvolt = <180
65 };
66
67 vddao_3v3: regulator-vddao-3v3 {
68 compatible = "regulator-fixed"
69 regulator-name = "VDDAO_3V3";
70 regulator-min-microvolt = <330
71 regulator-max-microvolt = <330
72 };
73
74 vcc_3v3: regulator-vcc-3v3 {
75 compatible = "regulator-fixed"
76 regulator-name = "VCC_3V3";
77 regulator-min-microvolt = <330
78 regulator-max-microvolt = <330
79 };
80
81 emmc_pwrseq: emmc-pwrseq {
82 compatible = "mmc-pwrseq-emmc"
83 reset-gpios = <&gpio BOOT_9 GP
84 };
85
86 wifi32k: wifi32k {
87 compatible = "pwm-clock";
88 #clock-cells = <0>;
89 clock-frequency = <32768>;
90 pwms = <&pwm_ef 0 30518 0>; /*
91 };
92
93 sdio_pwrseq: sdio-pwrseq {
94 compatible = "mmc-pwrseq-simpl
95 reset-gpios = <&gpio GPIOX_6 G
96 clocks = <&wifi32k>;
97 clock-names = "ext_clock";
98 };
99
100 cvbs-connector {
101 compatible = "composite-video-
102
103 port {
104 cvbs_connector_in: end
105 remote-endpoin
106 };
107 };
108 };
109
110 hdmi-connector {
111 compatible = "hdmi-connector";
112 type = "a";
113
114 port {
115 hdmi_connector_in: end
116 remote-endpoin
117 };
118 };
119 };
120
121 sound {
122 compatible = "amlogic,gx-sound
123 model = "P230-Q200";
124 audio-aux-devs = <&dio2133>;
125 audio-widgets = "Line", "Lineo
126 audio-routing = "AU2 INL", "AC
127 "AU2 INR", "AC
128 "AU2 INL", "AC
129 "AU2 INR", "AC
130 "Lineout", "AU
131 "Lineout", "AU
132 assigned-clocks = <&clkc CLKID
133 <&clkc CLKID
134 <&clkc CLKID
135 assigned-clock-parents = <0>,
136 assigned-clock-rates = <294912
137 <270950
138 <393216
139 dai-link-0 {
140 sound-dai = <&aiu AIU_
141 };
142
143 dai-link-1 {
144 sound-dai = <&aiu AIU_
145 };
146
147 dai-link-2 {
148 sound-dai = <&aiu AIU_
149 dai-format = "i2s";
150 mclk-fs = <256>;
151
152 codec-0 {
153 sound-dai = <&
154 };
155
156 codec-1 {
157 sound-dai = <&
158 };
159 };
160
161 dai-link-3 {
162 sound-dai = <&aiu AIU_
163
164 codec-0 {
165 sound-dai = <&
166 };
167 };
168
169 dai-link-4 {
170 sound-dai = <&aiu AIU_
171
172 codec-0 {
173 sound-dai = <&
174 };
175 };
176
177 dai-link-5 {
178 sound-dai = <&aiu AIU_
179
180 codec-0 {
181 sound-dai = <&
182 };
183 };
184 };
185 };
186
187 &acodec {
188 AVDD-supply = <&vddio_ao18>;
189 status = "okay";
190 };
191
192 &aiu {
193 status = "okay";
194 pinctrl-0 = <&spdif_out_h_pins>;
195 pinctrl-names = "default";
196
197 };
198
199 &cec_AO {
200 status = "okay";
201 pinctrl-0 = <&ao_cec_pins>;
202 pinctrl-names = "default";
203 hdmi-phandle = <&hdmi_tx>;
204 };
205
206 &cvbs_vdac_port {
207 cvbs_vdac_out: endpoint {
208 remote-endpoint = <&cvbs_conne
209 };
210 };
211
212 ðmac {
213 status = "okay";
214 };
215
216 &hdmi_tx {
217 status = "okay";
218 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i
219 pinctrl-names = "default";
220 hdmi-supply = <&hdmi_5v>;
221 };
222
223 &hdmi_tx_tmds_port {
224 hdmi_tx_tmds_out: endpoint {
225 remote-endpoint = <&hdmi_conne
226 };
227 };
228
229 &ir {
230 status = "okay";
231 pinctrl-0 = <&remote_input_ao_pins>;
232 pinctrl-names = "default";
233 };
234
235 &pwm_ef {
236 status = "okay";
237 pinctrl-0 = <&pwm_e_pins>;
238 pinctrl-names = "default";
239 clocks = <&clkc CLKID_FCLK_DIV4>;
240 clock-names = "clkin0";
241 };
242
243 &saradc {
244 status = "okay";
245 vref-supply = <&vddio_ao18>;
246 };
247
248 /* Wireless SDIO Module */
249 &sd_emmc_a {
250 status = "okay";
251 pinctrl-0 = <&sdio_pins>;
252 pinctrl-1 = <&sdio_clk_gate_pins>;
253 pinctrl-names = "default", "clk-gate";
254 #address-cells = <1>;
255 #size-cells = <0>;
256
257 bus-width = <4>;
258 cap-sd-highspeed;
259 max-frequency = <50000000>;
260
261 non-removable;
262 disable-wp;
263
264 /* WiFi firmware requires power to be
265 keep-power-in-suspend;
266
267 mmc-pwrseq = <&sdio_pwrseq>;
268
269 vmmc-supply = <&vddao_3v3>;
270 vqmmc-supply = <&vddio_boot>;
271 };
272
273 /* SD card */
274 &sd_emmc_b {
275 status = "okay";
276 pinctrl-0 = <&sdcard_pins>;
277 pinctrl-1 = <&sdcard_clk_gate_pins>;
278 pinctrl-names = "default", "clk-gate";
279
280 bus-width = <4>;
281 cap-sd-highspeed;
282 max-frequency = <50000000>;
283 disable-wp;
284
285 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_L
286
287 vmmc-supply = <&vddao_3v3>;
288 vqmmc-supply = <&vddio_boot>;
289 };
290
291 /* eMMC */
292 &sd_emmc_c {
293 status = "okay";
294 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pi
295 pinctrl-1 = <&emmc_clk_gate_pins>;
296 pinctrl-names = "default", "clk-gate";
297
298 bus-width = <8>;
299 cap-mmc-highspeed;
300 max-frequency = <200000000>;
301 non-removable;
302 disable-wp;
303 mmc-ddr-1_8v;
304 mmc-hs200-1_8v;
305
306 mmc-pwrseq = <&emmc_pwrseq>;
307 vmmc-supply = <&vcc_3v3>;
308 vqmmc-supply = <&vddio_boot>;
309 };
310
311 /* This UART is brought out to the DB9 connect
312 &uart_AO {
313 status = "okay";
314 pinctrl-0 = <&uart_ao_a_pins>;
315 pinctrl-names = "default";
316 };
317
318 &usb {
319 status = "okay";
320 dr_mode = "otg";
321 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.