1 // SPDX-License-Identifier: GPL-2.0-only
2
3 /dts-v1/;
4
5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi"
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq
11
12 / {
13 model = "Asus Zenfone 2 Laser";
14 compatible = "asus,z00l", "qcom,msm891
15 chassis-type = "handset";
16
17 aliases {
18 mmc0 = &sdhc_1; /* eMMC */
19 mmc1 = &sdhc_2; /* SD card */
20 serial0 = &blsp_uart2;
21 };
22
23 chosen {
24 stdout-path = "serial0";
25 };
26
27 gpio-keys {
28 compatible = "gpio-keys";
29
30 pinctrl-names = "default";
31 pinctrl-0 = <&gpio_keys_defaul
32
33 label = "GPIO Buttons";
34
35 button-volume-up {
36 label = "Volume Up";
37 gpios = <&tlmm 107 GPI
38 linux,code = <KEY_VOLU
39 debounce-interval = <1
40 };
41
42 button-volume-down {
43 label = "Volume Down";
44 gpios = <&tlmm 117 GPI
45 linux,code = <KEY_VOLU
46 debounce-interval = <1
47 };
48 };
49
50 reg_sd_vmmc: regulator-sdcard-vmmc {
51 compatible = "regulator-fixed"
52 regulator-name = "sdcard-vmmc"
53 regulator-min-microvolt = <295
54 regulator-max-microvolt = <295
55
56 gpio = <&tlmm 87 GPIO_ACTIVE_H
57 enable-active-high;
58
59 startup-delay-us = <200>;
60
61 pinctrl-names = "default";
62 pinctrl-0 = <&sd_vmmc_en_defau
63 };
64
65 usb_id: usb-id {
66 compatible = "linux,extcon-usb
67 id-gpios = <&tlmm 110 GPIO_ACT
68 pinctrl-names = "default";
69 pinctrl-0 = <&usb_id_default>;
70 };
71 };
72
73 &blsp_i2c2 {
74 status = "okay";
75
76 magnetometer@c {
77 compatible = "asahi-kasei,ak09
78 reg = <0x0c>;
79
80 vdd-supply = <&pm8916_l8>;
81 vid-supply = <&pm8916_l6>;
82
83 reset-gpios = <&tlmm 112 GPIO_
84
85 pinctrl-names = "default";
86 pinctrl-0 = <&mag_reset_defaul
87 };
88
89 imu@68 {
90 compatible = "invensense,mpu65
91 reg = <0x68>;
92
93 interrupt-parent = <&tlmm>;
94 interrupts = <36 IRQ_TYPE_EDGE
95
96 vdd-supply = <&pm8916_l17>;
97 vddio-supply = <&pm8916_l6>;
98
99 pinctrl-names = "default";
100 pinctrl-0 = <&imu_default>;
101
102 mount-matrix = "1", "0", "0",
103 "0", "-1", "0",
104 "0", "0", "1";
105 };
106 };
107
108 &blsp_i2c5 {
109 status = "okay";
110
111 touchscreen@38 {
112 compatible = "edt,edt-ft5306";
113 reg = <0x38>;
114
115 interrupt-parent = <&tlmm>;
116 interrupts = <13 IRQ_TYPE_EDGE
117
118 reset-gpios = <&tlmm 12 GPIO_A
119
120 vcc-supply = <&pm8916_l11>;
121 iovcc-supply = <&pm8916_l6>;
122
123 touchscreen-size-x = <720>;
124 touchscreen-size-y = <1280>;
125
126 pinctrl-names = "default";
127 pinctrl-0 = <&touchscreen_defa
128 };
129 };
130
131 &blsp_uart2 {
132 status = "okay";
133 };
134
135 &mpss_mem {
136 reg = <0x0 0x86800000 0x0 0x5500000>;
137 };
138
139 &pm8916_codec {
140 qcom,micbias-lvl = <2800>;
141 qcom,mbhc-vthreshold-low = <75 150 237
142 qcom,mbhc-vthreshold-high = <75 150 23
143 qcom,micbias1-ext-cap;
144 qcom,hphl-jack-type-normally-open;
145 };
146
147 &pm8916_rpm_regulators {
148 pm8916_l17: l17 {
149 regulator-min-microvolt = <285
150 regulator-max-microvolt = <285
151 };
152 };
153
154 &sdhc_1 {
155 status = "okay";
156 };
157
158 &sdhc_2 {
159 status = "okay";
160 vmmc-supply = <®_sd_vmmc>;
161
162 pinctrl-names = "default", "sleep";
163 pinctrl-0 = <&sdc2_default &sdc2_cd_de
164 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa
165 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
166 };
167
168 &sound {
169 audio-routing =
170 "AMIC1", "MIC BIAS External1",
171 "AMIC2", "MIC BIAS Internal2",
172 "AMIC3", "MIC BIAS External1";
173 };
174
175 &usb {
176 status = "okay";
177 extcon = <&usb_id>, <&usb_id>;
178 };
179
180 &usb_hs_phy {
181 extcon = <&usb_id>;
182 };
183
184 &venus {
185 status = "okay";
186 };
187
188 &venus_mem {
189 status = "okay";
190 };
191
192 &wcnss {
193 status = "okay";
194 };
195
196 &wcnss_iris {
197 compatible = "qcom,wcn3620";
198 };
199
200 &wcnss_mem {
201 status = "okay";
202 };
203
204 &tlmm {
205 gpio_keys_default: gpio-keys-default-s
206 pins = "gpio107", "gpio117";
207 function = "gpio";
208
209 drive-strength = <2>;
210 bias-pull-up;
211 };
212
213 imu_default: imu-default-state {
214 pins = "gpio36";
215 function = "gpio";
216
217 drive-strength = <2>;
218 bias-disable;
219 };
220
221 mag_reset_default: mag-reset-default-s
222 pins = "gpio112";
223 function = "gpio";
224
225 drive-strength = <2>;
226 bias-disable;
227 };
228
229 sd_vmmc_en_default: sd-vmmc-en-default
230 pins = "gpio87";
231 function = "gpio";
232
233 drive-strength = <2>;
234 bias-disable;
235 };
236
237 sdc2_cd_default: sdc2-cd-default-state
238 pins = "gpio38";
239 function = "gpio";
240 drive-strength = <2>;
241 bias-disable;
242 };
243
244 touchscreen_default: touchscreen-defau
245 touch-pins {
246 pins = "gpio13";
247 function = "gpio";
248
249 drive-strength = <2>;
250 bias-pull-up;
251 };
252
253 reset-pins {
254 pins = "gpio12";
255 function = "gpio";
256
257 drive-strength = <2>;
258 bias-disable;
259 };
260 };
261
262 usb_id_default: usb-id-default-state {
263 pins = "gpio110";
264 function = "gpio";
265
266 drive-strength = <8>;
267 bias-pull-up;
268 };
269 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.