1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2023, Luca Weiss <luca.weiss@f
4 */
5
6 /dts-v1/;
7
8 /* PM7250B is configured to use SID8/9 */
9 #define PM7250B_SID 8
10 #define PM7250B_SID1 9
11
12 #include <dt-bindings/iio/qcom,spmi-adc7-pm732
13 #include <dt-bindings/iio/qcom,spmi-adc7-pmk83
14 #include <dt-bindings/leds/common.h>
15 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h
16 #include <dt-bindings/regulator/qcom,rpmh-regu
17 #include "sc7280.dtsi"
18 #include "pm7250b.dtsi"
19 #include "pm7325.dtsi"
20 #include "pm8350c.dtsi" /* PM7350C */
21 #include "pmk8350.dtsi" /* PMK7325 */
22
23 /delete-node/ &rmtfs_mem;
24
25 / {
26 model = "Fairphone 5";
27 compatible = "fairphone,fp5", "qcom,qc
28 chassis-type = "handset";
29
30 aliases {
31 serial0 = &uart5;
32 serial1 = &uart7;
33 };
34
35 chosen {
36 #address-cells = <2>;
37 #size-cells = <2>;
38 ranges;
39
40 framebuffer0: framebuffer@a000
41 compatible = "simple-f
42 reg = <0x0 0xe1000000
43 width = <1224>;
44 height = <2700>;
45 stride = <(1224 * 4)>;
46 format = "a8r8g8b8";
47 clocks = <&gcc GCC_DIS
48 };
49 };
50
51 gpio-keys {
52 compatible = "gpio-keys";
53
54 pinctrl-0 = <&volume_down_defa
55 pinctrl-names = "default";
56
57 key-volume-up {
58 label = "Volume up";
59 gpios = <&pm7325_gpios
60 linux,code = <KEY_VOLU
61 };
62
63 /* Powered by the always-on vr
64 event-hall-sensor {
65 label = "Hall Effect S
66 gpios = <&tlmm 155 GPI
67 linux,input-type = <EV
68 linux,code = <SW_LID>;
69 linux,can-disable;
70 wakeup-source;
71 };
72 };
73
74 pmic-glink {
75 compatible = "qcom,qcm6490-pmi
76
77 #address-cells = <1>;
78 #size-cells = <0>;
79
80 orientation-gpios = <&tlmm 140
81
82 connector@0 {
83 compatible = "usb-c-co
84 reg = <0>;
85 power-role = "dual";
86 data-role = "dual";
87
88 ports {
89 #address-cells
90 #size-cells =
91
92 port@0 {
93 reg =
94
95 pmic_g
96
97 };
98 };
99
100 port@1 {
101 reg =
102
103 pmic_g
104
105 };
106 };
107 };
108 };
109 };
110
111 reserved-memory {
112 cont_splash_mem: cont-splash@e
113 reg = <0x0 0xe1000000
114 no-map;
115 };
116
117 cdsp_mem: cdsp@88f00000 {
118 reg = <0x0 0x88f00000
119 no-map;
120 };
121
122 removed_mem: removed@c0000000
123 reg = <0x0 0xc0000000
124 no-map;
125 };
126
127 rmtfs_mem: memory@f8500000 {
128 compatible = "qcom,rmt
129 reg = <0x0 0xf8500000
130 no-map;
131
132 qcom,client-id = <1>;
133 qcom,vmid = <QCOM_SCM_
134 };
135 };
136
137 ois_avdd0_1p8: regulator-ois-avdd0-1p8
138 compatible = "regulator-fixed"
139 regulator-name = "OIS_AVDD0_1P
140 regulator-min-microvolt = <180
141 regulator-max-microvolt = <180
142 gpio = <&tlmm 157 GPIO_ACTIVE_
143 enable-active-high;
144 vin-supply = <&vreg_bob>;
145 };
146
147 ois_dvdd_1p1: regulator-ois-dvdd-1p1 {
148 compatible = "regulator-fixed"
149 regulator-name = "OIS_DVDD_1P1
150 regulator-min-microvolt = <110
151 regulator-max-microvolt = <110
152 gpio = <&tlmm 97 GPIO_ACTIVE_H
153 enable-active-high;
154 vin-supply = <&vreg_s8b>;
155 };
156
157 afvdd_2p8: regulator-afvdd-2p8 {
158 compatible = "regulator-fixed"
159 regulator-name = "AFVDD_2P8";
160 regulator-min-microvolt = <280
161 regulator-max-microvolt = <280
162 gpio = <&tlmm 68 GPIO_ACTIVE_H
163 enable-active-high;
164 vin-supply = <&vreg_bob>;
165 };
166
167 thermal-zones {
168 camera-thermal {
169 polling-delay-passive
170
171 thermal-sensors = <&pm
172
173 trips {
174 active-config0
175 temper
176 hyster
177 type =
178 };
179 };
180 };
181
182 chg-skin-thermal {
183 polling-delay-passive
184
185 thermal-sensors = <&pm
186
187 trips {
188 active-config0
189 temper
190 hyster
191 type =
192 };
193 };
194 };
195
196 conn-thermal {
197 polling-delay-passive
198
199 thermal-sensors = <&pm
200
201 trips {
202 active-config0
203 temper
204 hyster
205 type =
206 };
207 };
208 };
209
210 pm8008-thermal {
211 polling-delay-passive
212 thermal-sensors = <&pm
213
214 trips {
215 trip0 {
216 temper
217 hyster
218 type =
219 };
220
221 trip1 {
222 temper
223 hyster
224 type =
225 };
226 };
227 };
228
229 quiet-thermal {
230 polling-delay-passive
231
232 thermal-sensors = <&pm
233
234 trips {
235 active-config0
236 temper
237 hyster
238 type =
239 };
240 };
241 };
242
243 rear-cam-thermal {
244 polling-delay-passive
245
246 thermal-sensors = <&pm
247
248 trips {
249 active-config0
250 temper
251 hyster
252 type =
253 };
254 };
255 };
256
257 sdm-skin-thermal {
258 polling-delay-passive
259
260 thermal-sensors = <&pm
261
262 trips {
263 active-config0
264 temper
265 hyster
266 type =
267 };
268 };
269 };
270
271 xo-thermal {
272 polling-delay-passive
273
274 thermal-sensors = <&pm
275
276 trips {
277 active-config0
278 temper
279 hyster
280 type =
281 };
282 };
283 };
284 };
285 };
286
287 &apps_rsc {
288 regulators-0 {
289 compatible = "qcom,pm7325-rpmh
290 qcom,pmic-id = "b";
291
292 vreg_s1b: smps1 {
293 regulator-name = "vreg
294 regulator-min-microvol
295 regulator-max-microvol
296 };
297
298 vreg_s7b: smps7 {
299 regulator-name = "vreg
300 regulator-min-microvol
301 regulator-max-microvol
302 };
303
304 vreg_s8b: smps8 {
305 regulator-name = "vreg
306 regulator-min-microvol
307 regulator-max-microvol
308 regulator-initial-mode
309 };
310
311 vreg_l1b: ldo1 {
312 regulator-name = "vreg
313 regulator-min-microvol
314 regulator-max-microvol
315 regulator-initial-mode
316 };
317
318 vreg_l2b: ldo2 {
319 regulator-name = "vreg
320 regulator-min-microvol
321 regulator-max-microvol
322 regulator-initial-mode
323 };
324
325 vreg_l3b: ldo3 {
326 regulator-name = "vreg
327 regulator-min-microvol
328 regulator-max-microvol
329 regulator-initial-mode
330 };
331
332 vreg_l6b: ldo6 {
333 regulator-name = "vreg
334 regulator-min-microvol
335 regulator-max-microvol
336 regulator-initial-mode
337 };
338
339 vreg_l7b: ldo7 {
340 regulator-name = "vreg
341 /* Constrained for UFS
342 regulator-min-microvol
343 regulator-max-microvol
344 regulator-initial-mode
345 };
346
347 vreg_l8b: ldo8 {
348 regulator-name = "vreg
349 regulator-min-microvol
350 regulator-max-microvol
351 regulator-initial-mode
352 };
353
354 vreg_l9b: ldo9 {
355 regulator-name = "vreg
356 regulator-min-microvol
357 regulator-max-microvol
358 regulator-initial-mode
359 };
360
361 vreg_l11b: ldo11 {
362 regulator-name = "vreg
363 regulator-min-microvol
364 regulator-max-microvol
365 regulator-initial-mode
366 };
367
368 vreg_l12b: ldo12 {
369 regulator-name = "vreg
370 regulator-min-microvol
371 regulator-max-microvol
372 regulator-initial-mode
373 };
374
375 vreg_l13b: ldo13 {
376 regulator-name = "vreg
377 regulator-min-microvol
378 regulator-max-microvol
379 regulator-initial-mode
380 };
381
382 vreg_l14b: ldo14 {
383 regulator-name = "vreg
384 regulator-min-microvol
385 regulator-max-microvol
386 regulator-initial-mode
387 };
388
389 vreg_l15b: ldo15 {
390 regulator-name = "vreg
391 regulator-min-microvol
392 regulator-max-microvol
393 regulator-initial-mode
394 };
395
396 vreg_l16b: ldo16 {
397 regulator-name = "vreg
398 regulator-min-microvol
399 regulator-max-microvol
400 regulator-initial-mode
401 };
402
403 vreg_l17b: ldo17 {
404 regulator-name = "vreg
405 regulator-min-microvol
406 regulator-max-microvol
407 regulator-initial-mode
408 };
409
410 vreg_l18b: ldo18 {
411 regulator-name = "vreg
412 regulator-min-microvol
413 regulator-max-microvol
414 regulator-initial-mode
415 };
416
417 vreg_l19b: ldo19 {
418 regulator-name = "vreg
419 regulator-min-microvol
420 regulator-max-microvol
421 regulator-initial-mode
422 };
423 };
424
425 regulators-1 {
426 compatible = "qcom,pm8350c-rpm
427 qcom,pmic-id = "c";
428
429 vreg_s1c: smps1 {
430 regulator-name = "vreg
431 regulator-min-microvol
432 regulator-max-microvol
433 regulator-initial-mode
434 };
435
436 vreg_s9c: smps9 {
437 regulator-name = "vreg
438 regulator-min-microvol
439 regulator-max-microvol
440 regulator-initial-mode
441 };
442
443 vreg_l1c: ldo1 {
444 regulator-name = "vreg
445 regulator-min-microvol
446 regulator-max-microvol
447 regulator-initial-mode
448 };
449
450 vreg_l2c: ldo2 {
451 regulator-name = "vreg
452 regulator-min-microvol
453 regulator-max-microvol
454 regulator-initial-mode
455 };
456
457 vreg_l3c: ldo3 {
458 regulator-name = "vreg
459 regulator-min-microvol
460 regulator-max-microvol
461 regulator-initial-mode
462 };
463
464 vreg_l4c: ldo4 {
465 regulator-name = "vreg
466 regulator-min-microvol
467 regulator-max-microvol
468 regulator-initial-mode
469 };
470
471 vreg_l5c: ldo5 {
472 regulator-name = "vreg
473 regulator-min-microvol
474 regulator-max-microvol
475 regulator-initial-mode
476 };
477
478 vreg_l6c: ldo6 {
479 regulator-name = "vreg
480 regulator-min-microvol
481 regulator-max-microvol
482 regulator-initial-mode
483 };
484
485 vreg_l7c: ldo7 {
486 regulator-name = "vreg
487 regulator-min-microvol
488 regulator-max-microvol
489 regulator-initial-mode
490 };
491
492 vreg_l8c: ldo8 {
493 regulator-name = "vreg
494 regulator-min-microvol
495 regulator-max-microvol
496 regulator-initial-mode
497 /* Hall sensor VDD */
498 regulator-always-on;
499 };
500
501 vreg_l9c: ldo9 {
502 regulator-name = "vreg
503 regulator-min-microvol
504 regulator-max-microvol
505 regulator-initial-mode
506 };
507
508 vreg_l10c: ldo10 {
509 regulator-name = "vreg
510 regulator-min-microvol
511 regulator-max-microvol
512 regulator-initial-mode
513 };
514
515 vreg_l11c: ldo11 {
516 regulator-name = "vreg
517 regulator-min-microvol
518 regulator-max-microvol
519 regulator-initial-mode
520 };
521
522 vreg_l12c: ldo12 {
523 regulator-name = "vreg
524 regulator-min-microvol
525 regulator-max-microvol
526 regulator-initial-mode
527 };
528
529 vreg_l13c: ldo13 {
530 regulator-name = "vreg
531 regulator-min-microvol
532 regulator-max-microvol
533 regulator-initial-mode
534 };
535
536 vreg_bob: bob {
537 regulator-name = "vreg
538 regulator-min-microvol
539 regulator-max-microvol
540 regulator-initial-mode
541 };
542 };
543 };
544
545 &dispcc {
546 /* Disable for now so simple-framebuff
547 status = "disabled";
548 };
549
550 &gcc {
551 protected-clocks = <GCC_CFG_NOC_LPASS_
552 <GCC_EDP_CLKREF_EN>
553 <GCC_MSS_CFG_AHB_CL
554 <GCC_MSS_GPLL0_MAIN
555 <GCC_MSS_OFFLINE_AX
556 <GCC_MSS_Q6SS_BOOT_
557 <GCC_MSS_Q6_MEMNOC_
558 <GCC_MSS_SNOC_AXI_C
559 <GCC_QSPI_CNOC_PERI
560 <GCC_QSPI_CORE_CLK>
561 <GCC_QSPI_CORE_CLK_
562 <GCC_SEC_CTRL_CLK_S
563 <GCC_WPSS_AHB_BDG_M
564 <GCC_WPSS_AHB_CLK>,
565 <GCC_WPSS_RSCP_CLK>
566 };
567
568 &gpi_dma0 {
569 status = "okay";
570 };
571
572 &gpi_dma1 {
573 status = "okay";
574 };
575
576 &i2c1 {
577 status = "okay";
578
579 pm8008: pmic@8 {
580 compatible = "qcom,pm8008";
581 reg = <0x8>;
582
583 interrupts-extended = <&tlmm 2
584 reset-gpios = <&pm8350c_gpios
585
586 vdd-l1-l2-supply = <&vreg_s8b>
587 vdd-l3-l4-supply = <&vreg_bob>
588 vdd-l5-supply = <&vreg_bob>;
589 vdd-l6-supply = <&vreg_s1b>;
590 vdd-l7-supply = <&vreg_bob>;
591
592 pinctrl-names = "default";
593 pinctrl-0 = <&pm8008_int_defau
594
595 gpio-controller;
596 #gpio-cells = <2>;
597 gpio-ranges = <&pm8008 0 0 2>;
598
599 interrupt-controller;
600 #interrupt-cells = <2>;
601
602 #thermal-sensor-cells = <0>;
603
604 regulators {
605 vreg_l1p: ldo1 {
606 regulator-name
607 regulator-min-
608 regulator-max-
609 };
610
611 vreg_l2p: ldo2 {
612 regulator-name
613 regulator-min-
614 regulator-max-
615 };
616
617 vreg_l3p: ldo3 {
618 regulator-name
619 regulator-min-
620 regulator-max-
621 };
622
623 vreg_l4p: ldo4 {
624 regulator-name
625 regulator-min-
626 regulator-max-
627 };
628
629 vreg_l5p: ldo5 {
630 regulator-name
631 regulator-min-
632 regulator-max-
633 };
634
635 vreg_l6p: ldo6 {
636 regulator-name
637 regulator-min-
638 regulator-max-
639 };
640
641 vreg_l7p: ldo7 {
642 regulator-name
643 regulator-min-
644 regulator-max-
645 };
646 };
647 };
648
649 /* Pixelworks @ 26 */
650 /* FSA4480 USB audio switch @ 42 */
651 /* AW86927FCR haptics @ 5a */
652 };
653
654 &i2c2 {
655 status = "okay";
656
657 /* AW88261FCR amplifier @ 34 */
658 /* AW88261FCR amplifier @ 35 */
659 };
660
661 &i2c4 {
662 status = "okay";
663
664 /* PTN36502 USB redriver @ 1a */
665 };
666
667 &i2c9 {
668 status = "okay";
669
670 /* ST21NFC NFC @ 28 */
671 /* VL53L3 ToF @ 29 */
672 };
673
674 &ipa {
675 qcom,gsi-loader = "self";
676 memory-region = <&ipa_fw_mem>;
677 firmware-name = "qcom/qcm6490/fairphon
678 status = "okay";
679 };
680
681 &pm7250b_adc {
682 channel@4d {
683 reg = <ADC5_AMUX_THM1_100K_PU>
684 qcom,ratiometric;
685 qcom,hw-settle-time = <200>;
686 qcom,pre-scaling = <1 1>;
687 label = "charger_skin_therm";
688 };
689
690 channel@4f {
691 reg = <ADC5_AMUX_THM3_100K_PU>
692 qcom,ratiometric;
693 qcom,hw-settle-time = <200>;
694 qcom,pre-scaling = <1 1>;
695 label = "conn_therm";
696 };
697 };
698
699 &pm7250b_adc_tm {
700 status = "okay";
701
702 charger-skin-therm@0 {
703 reg = <0>;
704 io-channels = <&pm7250b_adc AD
705 qcom,ratiometric;
706 qcom,hw-settle-time-us = <200>
707 };
708
709 conn-therm@1 {
710 reg = <1>;
711 io-channels = <&pm7250b_adc AD
712 qcom,ratiometric;
713 qcom,hw-settle-time-us = <200>
714 };
715 };
716
717 &pm7325_gpios {
718 volume_down_default: volume-down-defau
719 pins = "gpio6";
720 function = PMIC_GPIO_FUNC_NORM
721 power-source = <1>;
722 bias-pull-up;
723 input-enable;
724 };
725 };
726
727 &pm8350c_flash {
728 status = "okay";
729
730 led-0 {
731 function = LED_FUNCTION_FLASH;
732 color = <LED_COLOR_ID_WHITE>;
733 led-sources = <1>, <4>;
734 led-max-microamp = <500000>;
735 flash-max-microamp = <1500000>
736 flash-max-timeout-us = <128000
737 };
738 };
739
740 &pmk8350_adc_tm {
741 status = "okay";
742
743 xo-therm@0 {
744 reg = <0>;
745 io-channels = <&pmk8350_vadc P
746 qcom,ratiometric;
747 qcom,hw-settle-time-us = <200>
748 };
749
750 quiet-therm@1 {
751 reg = <1>;
752 io-channels = <&pmk8350_vadc P
753 qcom,ratiometric;
754 qcom,hw-settle-time-us = <200>
755 };
756
757 cam-flash-therm@2 {
758 reg = <2>;
759 io-channels = <&pmk8350_vadc P
760 qcom,ratiometric;
761 qcom,hw-settle-time-us = <200>
762 };
763
764 sdm-skin-therm@3 {
765 reg = <3>;
766 io-channels = <&pmk8350_vadc P
767 qcom,ratiometric;
768 qcom,hw-settle-time-us = <200>
769 };
770
771 wide-rfc-therm@4 {
772 reg = <4>;
773 io-channels = <&pmk8350_vadc P
774 qcom,ratiometric;
775 qcom,hw-settle-time-us = <200>
776 };
777 };
778
779 &pm8350c_gpios {
780 pm8008_reset_n_default: pm8008-reset-n
781 pins = "gpio3";
782 function = PMIC_GPIO_FUNC_NORM
783 bias-pull-down;
784 };
785 };
786
787 &pmk8350_rtc {
788 status = "okay";
789 };
790
791 &pmk8350_vadc {
792 status = "okay";
793
794 channel@44 {
795 reg = <PMK8350_ADC7_AMUX_THM1_
796 qcom,ratiometric;
797 qcom,hw-settle-time = <200>;
798 qcom,pre-scaling = <1 1>;
799 label = "pmk8350_xo_therm";
800 };
801
802 channel@144 {
803 reg = <PM7325_ADC7_AMUX_THM1_1
804 qcom,ratiometric;
805 qcom,hw-settle-time = <200>;
806 qcom,pre-scaling = <1 1>;
807 label = "pm7325_quiet_therm";
808 };
809
810 channel@145 {
811 reg = <PM7325_ADC7_AMUX_THM2_1
812 qcom,ratiometric;
813 qcom,hw-settle-time = <200>;
814 qcom,pre-scaling = <1 1>;
815 label = "pm7325_cam_flash_ther
816 };
817
818 channel@146 {
819 reg = <PM7325_ADC7_AMUX_THM3_1
820 qcom,ratiometric;
821 qcom,hw-settle-time = <200>;
822 qcom,pre-scaling = <1 1>;
823 label = "pm7325_sdm_skin_therm
824 };
825
826 channel@147 {
827 reg = <PM7325_ADC7_AMUX_THM4_1
828 qcom,ratiometric;
829 qcom,hw-settle-time = <200>;
830 qcom,pre-scaling = <1 1>;
831 label = "pm7325_wide_rfc_therm
832 };
833 };
834
835 &pon_pwrkey {
836 status = "okay";
837 };
838
839 &pon_resin {
840 linux,code = <KEY_VOLUMEDOWN>;
841 status = "okay";
842 };
843
844 &qup_spi13_cs {
845 drive-strength = <6>;
846 bias-disable;
847 };
848
849 &qup_spi13_data_clk {
850 drive-strength = <6>;
851 bias-disable;
852 };
853
854 &qup_uart5_rx {
855 drive-strength = <2>;
856 bias-disable;
857 };
858
859 &qup_uart5_tx {
860 drive-strength = <2>;
861 bias-disable;
862 };
863
864 &qupv3_id_0 {
865 status = "okay";
866 };
867
868 &qupv3_id_1 {
869 status = "okay";
870 };
871
872 &remoteproc_adsp {
873 firmware-name = "qcom/qcm6490/fairphon
874 status = "okay";
875 };
876
877 &remoteproc_cdsp {
878 firmware-name = "qcom/qcm6490/fairphon
879 status = "okay";
880 };
881
882 &remoteproc_mpss {
883 firmware-name = "qcom/qcm6490/fairphon
884 status = "okay";
885 };
886
887 &remoteproc_wpss {
888 firmware-name = "qcom/qcm6490/fairphon
889 status = "okay";
890 };
891
892 &sdc2_clk {
893 drive-strength = <16>;
894 bias-disable;
895 };
896
897 &sdc2_cmd {
898 drive-strength = <10>;
899 bias-pull-up;
900 };
901
902 &sdc2_data {
903 drive-strength = <10>;
904 bias-pull-up;
905 };
906
907 &sdhc_2 {
908 vmmc-supply = <&vreg_l9c>;
909 vqmmc-supply = <&vreg_l6c>;
910
911 pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>,
912 pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_
913
914 status = "okay";
915 };
916
917 &spi13 {
918 status = "okay";
919
920 /* Goodix touchscreen @ 0 */
921 };
922
923 &tlmm {
924 /*
925 * 32-33: SMB1394 (SPMI)
926 * 56-59: fingerprint reader (SPI)
927 */
928 gpio-reserved-ranges = <32 2>, <56 4>;
929
930 bluetooth_enable_default: bluetooth-en
931 pins = "gpio85";
932 function = "gpio";
933 output-low;
934 bias-disable;
935 };
936
937 hall_sensor_default: hall-sensor-defau
938 pins = "gpio155";
939 function = "gpio";
940 drive-strength = <2>;
941 bias-pull-up;
942 };
943
944 pm8008_int_default: pm8008-int-default
945 pins = "gpio25";
946 function = "gpio";
947 drive-strength = <2>;
948 bias-disable;
949 };
950
951 qup_uart7_sleep_cts: qup-uart7-sleep-c
952 pins = "gpio28";
953 function = "gpio";
954 /*
955 * Configure a bias-bus-hold o
956 * usage when Bluetooth is tur
957 * maintain a low power state
958 * the Bluetooth module drives
959 * direction or leaves the pin
960 */
961 bias-bus-hold;
962 };
963
964 qup_uart7_sleep_rts: qup-uart7-sleep-r
965 pins = "gpio29";
966 function = "gpio";
967 /*
968 * Configure pull-down on RTS.
969 * signal, pull it low to indi
970 * can wakeup the system anyti
971 * pulling RX low (by sending
972 */
973 bias-pull-down;
974 };
975
976 qup_uart7_sleep_tx: qup-uart7-sleep-tx
977 pins = "gpio30";
978 function = "gpio";
979 /*
980 * Configure pull-up on TX whe
981 * to prevent BT SoC from rece
982 */
983 bias-pull-up;
984 };
985
986 qup_uart7_sleep_rx: qup-uart7-sleep-rx
987 pins = "gpio31";
988 function = "gpio";
989 /*
990 * Configure a pull-up on RX.
991 * garbage data when the TX pi
992 * is floating which may cause
993 */
994 bias-pull-up;
995 };
996
997 sw_ctrl_default: sw-ctrl-default-state
998 pins = "gpio86";
999 function = "gpio";
1000 bias-pull-down;
1001 };
1002 };
1003
1004 &uart5 {
1005 status = "okay";
1006 };
1007
1008 &uart7 {
1009 /delete-property/interrupts;
1010 interrupts-extended = <&intc GIC_SPI
1011 <&tlmm 31 IRQ_T
1012
1013 pinctrl-1 = <&qup_uart7_sleep_cts>, <
1014 pinctrl-names = "default", "sleep";
1015
1016 status = "okay";
1017
1018 bluetooth: bluetooth {
1019 compatible = "qcom,wcn6750-bt
1020
1021 pinctrl-0 = <&bluetooth_enabl
1022 pinctrl-names = "default";
1023
1024 enable-gpios = <&tlmm 85 GPIO
1025 swctrl-gpios = <&tlmm 86 GPIO
1026
1027 vddio-supply = <&vreg_l19b>;
1028 vddaon-supply = <&vreg_s7b>;
1029 vddbtcxmx-supply = <&vreg_s7b
1030 vddrfacmn-supply = <&vreg_s7b
1031 vddrfa0p8-supply = <&vreg_s7b
1032 vddrfa1p7-supply = <&vreg_s1b
1033 vddrfa1p2-supply = <&vreg_s8b
1034 vddrfa2p2-supply = <&vreg_s1c
1035 vddasd-supply = <&vreg_l11c>;
1036
1037 max-speed = <3200000>;
1038 };
1039 };
1040
1041 &ufs_mem_hc {
1042 reset-gpios = <&tlmm 175 GPIO_ACTIVE_
1043
1044 vcc-supply = <&vreg_l7b>;
1045 vcc-max-microamp = <800000>;
1046 /*
1047 * Technically l9b enables an eLDO (s
1048 * VCCQ2 of the UFS.
1049 */
1050 vccq-supply = <&vreg_l9b>;
1051 vccq-max-microamp = <900000>;
1052
1053 status = "okay";
1054 };
1055
1056 &ufs_mem_phy {
1057 vdda-phy-supply = <&vreg_l10c>;
1058 vdda-pll-supply = <&vreg_l6b>;
1059
1060 status = "okay";
1061 };
1062
1063 &usb_1 {
1064 status = "okay";
1065 };
1066
1067 &usb_1_dwc3 {
1068 dr_mode = "otg";
1069 usb-role-switch;
1070 };
1071
1072 &usb_1_dwc3_hs {
1073 remote-endpoint = <&pmic_glink_hs_in>
1074 };
1075
1076 &usb_1_dwc3_ss {
1077 remote-endpoint = <&pmic_glink_ss_in>
1078 };
1079
1080 &usb_1_hsphy {
1081 vdda-pll-supply = <&vreg_l10c>;
1082 vdda18-supply = <&vreg_l1c>;
1083 vdda33-supply = <&vreg_l2b>;
1084
1085 qcom,hs-crossover-voltage-microvolt =
1086 qcom,hs-output-impedance-micro-ohms =
1087 qcom,hs-rise-fall-time-bp = <5430>;
1088 qcom,hs-disconnect-bp = <1743>;
1089 qcom,hs-amplitude-bp = <2430>;
1090
1091 qcom,pre-emphasis-amplitude-bp = <200
1092 qcom,pre-emphasis-duration-bp = <2000
1093
1094 qcom,squelch-detector-bp = <(-2090)>;
1095
1096 status = "okay";
1097 };
1098
1099 &usb_1_qmpphy {
1100 vdda-phy-supply = <&vreg_l6b>;
1101 vdda-pll-supply = <&vreg_l1b>;
1102
1103 status = "okay";
1104 };
1105
1106 &venus {
1107 firmware-name = "qcom/qcm6490/fairpho
1108 status = "okay";
1109 };
1110
1111 &wifi {
1112 qcom,ath11k-calibration-variant = "Fa
1113 status = "okay";
1114 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.