1 // SPDX-License-Identifier: GPL-2.0-only OR MI
2 /*
3 * Device Tree Source for J721S2 SoC Family MC
4 *
5 * Copyright (C) 2021-2024 Texas Instruments I
6 */
7
8 &cbass_mcu_wakeup {
9 sms: system-controller@44083000 {
10 compatible = "ti,k2g-sci";
11 ti,host-id = <12>;
12
13 mbox-names = "rx", "tx";
14
15 mboxes = <&secure_proxy_main 1
16 <&secure_proxy_main 1
17
18 reg-names = "debug_messages";
19 reg = <0x00 0x44083000 0x00 0x
20
21 k3_pds: power-controller {
22 compatible = "ti,sci-p
23 #power-domain-cells =
24 };
25
26 k3_clks: clock-controller {
27 compatible = "ti,k2g-s
28 #clock-cells = <2>;
29 };
30
31 k3_reset: reset-controller {
32 compatible = "ti,sci-r
33 #reset-cells = <2>;
34 };
35 };
36
37 wkup_conf: bus@43000000 {
38 compatible = "simple-bus";
39 #address-cells = <1>;
40 #size-cells = <1>;
41 ranges = <0x0 0x00 0x43000000
42
43 chipid: chipid@14 {
44 compatible = "ti,am654
45 reg = <0x14 0x4>;
46 };
47 };
48
49 secure_proxy_sa3: mailbox@43600000 {
50 compatible = "ti,am654-secure-
51 #mbox-cells = <1>;
52 reg-names = "target_data", "rt
53 reg = <0x00 0x43600000 0x00 0x
54 <0x00 0x44880000 0x00 0x
55 <0x00 0x44860000 0x00 0x
56 /*
57 * Marked Disabled:
58 * Node is incomplete as it is
59 * firmware on non-MPU process
60 */
61 status = "disabled";
62 };
63
64 mcu_ram: sram@41c00000 {
65 compatible = "mmio-sram";
66 reg = <0x00 0x41c00000 0x00 0x
67 ranges = <0x00 0x00 0x41c00000
68 #address-cells = <1>;
69 #size-cells = <1>;
70 };
71
72 wkup_pmx0: pinctrl@4301c000 {
73 compatible = "pinctrl-single";
74 /* Proxy 0 addressing */
75 reg = <0x00 0x4301c000 0x00 0x
76 #pinctrl-cells = <1>;
77 pinctrl-single,register-width
78 pinctrl-single,function-mask =
79 };
80
81 wkup_pmx1: pinctrl@4301c038 {
82 compatible = "pinctrl-single";
83 /* Proxy 0 addressing */
84 reg = <0x00 0x4301c038 0x00 0x
85 #pinctrl-cells = <1>;
86 pinctrl-single,register-width
87 pinctrl-single,function-mask =
88 };
89
90 wkup_pmx2: pinctrl@4301c068 {
91 compatible = "pinctrl-single";
92 /* Proxy 0 addressing */
93 reg = <0x00 0x4301c068 0x00 0x
94 #pinctrl-cells = <1>;
95 pinctrl-single,register-width
96 pinctrl-single,function-mask =
97 };
98
99 wkup_pmx3: pinctrl@4301c190 {
100 compatible = "pinctrl-single";
101 /* Proxy 0 addressing */
102 reg = <0x00 0x4301c190 0x00 0x
103 #pinctrl-cells = <1>;
104 pinctrl-single,register-width
105 pinctrl-single,function-mask =
106 };
107
108 /* MCU_TIMERIO pad input CTRLMMR_MCU_T
109 mcu_timerio_input: pinctrl@40f04200 {
110 compatible = "pinctrl-single";
111 reg = <0x00 0x40f04200 0x00 0x
112 #pinctrl-cells = <1>;
113 pinctrl-single,register-width
114 pinctrl-single,function-mask =
115 /* Non-MPU Firmware usage */
116 status = "reserved";
117 };
118
119 /* MCU_TIMERIO pad output CTRLMMR_MCU_
120 mcu_timerio_output: pinctrl@40f04280 {
121 compatible = "pinctrl-single";
122 reg = <0x00 0x40f04280 0x00 0x
123 #pinctrl-cells = <1>;
124 pinctrl-single,register-width
125 pinctrl-single,function-mask =
126 /* Non-MPU Firmware usage */
127 status = "reserved";
128 };
129
130 wkup_gpio_intr: interrupt-controller@4
131 compatible = "ti,sci-intr";
132 reg = <0x00 0x42200000 0x00 0x
133 ti,intr-trigger-type = <1>;
134 interrupt-controller;
135 interrupt-parent = <&gic500>;
136 #interrupt-cells = <1>;
137 ti,sci = <&sms>;
138 ti,sci-dev-id = <125>;
139 ti,interrupt-ranges = <16 960
140 };
141
142 mcu_conf: bus@40f00000 {
143 compatible = "simple-bus";
144 #address-cells = <1>;
145 #size-cells = <1>;
146 ranges = <0x0 0x0 0x40f00000 0
147
148 cpsw_mac_syscon: ethernet-mac-
149 compatible = "ti,am62p
150 reg = <0x200 0x8>;
151 };
152
153 phy_gmii_sel: phy@4040 {
154 compatible = "ti,am654
155 reg = <0x4040 0x4>;
156 #phy-cells = <1>;
157 };
158
159 };
160
161 mcu_timer0: timer@40400000 {
162 compatible = "ti,am654-timer";
163 reg = <0x00 0x40400000 0x00 0x
164 interrupts = <GIC_SPI 816 IRQ_
165 clocks = <&k3_clks 35 1>;
166 clock-names = "fck";
167 assigned-clocks = <&k3_clks 35
168 assigned-clock-parents = <&k3_
169 power-domains = <&k3_pds 35 TI
170 ti,timer-pwm;
171 /* Non-MPU Firmware usage */
172 status = "reserved";
173 };
174
175 mcu_timer1: timer@40410000 {
176 compatible = "ti,am654-timer";
177 reg = <0x00 0x40410000 0x00 0x
178 interrupts = <GIC_SPI 817 IRQ_
179 clocks = <&k3_clks 83 1>;
180 clock-names = "fck";
181 assigned-clocks = <&k3_clks 83
182 assigned-clock-parents = <&k3_
183 power-domains = <&k3_pds 83 TI
184 ti,timer-pwm;
185 /* Non-MPU Firmware usage */
186 status = "reserved";
187 };
188
189 mcu_timer2: timer@40420000 {
190 compatible = "ti,am654-timer";
191 reg = <0x00 0x40420000 0x00 0x
192 interrupts = <GIC_SPI 818 IRQ_
193 clocks = <&k3_clks 84 1>;
194 clock-names = "fck";
195 assigned-clocks = <&k3_clks 84
196 assigned-clock-parents = <&k3_
197 power-domains = <&k3_pds 84 TI
198 ti,timer-pwm;
199 /* Non-MPU Firmware usage */
200 status = "reserved";
201 };
202
203 mcu_timer3: timer@40430000 {
204 compatible = "ti,am654-timer";
205 reg = <0x00 0x40430000 0x00 0x
206 interrupts = <GIC_SPI 819 IRQ_
207 clocks = <&k3_clks 85 1>;
208 clock-names = "fck";
209 assigned-clocks = <&k3_clks 85
210 assigned-clock-parents = <&k3_
211 power-domains = <&k3_pds 85 TI
212 ti,timer-pwm;
213 /* Non-MPU Firmware usage */
214 status = "reserved";
215 };
216
217 mcu_timer4: timer@40440000 {
218 compatible = "ti,am654-timer";
219 reg = <0x00 0x40440000 0x00 0x
220 interrupts = <GIC_SPI 820 IRQ_
221 clocks = <&k3_clks 86 1>;
222 clock-names = "fck";
223 assigned-clocks = <&k3_clks 86
224 assigned-clock-parents = <&k3_
225 power-domains = <&k3_pds 86 TI
226 ti,timer-pwm;
227 /* Non-MPU Firmware usage */
228 status = "reserved";
229 };
230
231 mcu_timer5: timer@40450000 {
232 compatible = "ti,am654-timer";
233 reg = <0x00 0x40450000 0x00 0x
234 interrupts = <GIC_SPI 821 IRQ_
235 clocks = <&k3_clks 87 1>;
236 clock-names = "fck";
237 assigned-clocks = <&k3_clks 87
238 assigned-clock-parents = <&k3_
239 power-domains = <&k3_pds 87 TI
240 ti,timer-pwm;
241 /* Non-MPU Firmware usage */
242 status = "reserved";
243 };
244
245 mcu_timer6: timer@40460000 {
246 compatible = "ti,am654-timer";
247 reg = <0x00 0x40460000 0x00 0x
248 interrupts = <GIC_SPI 822 IRQ_
249 clocks = <&k3_clks 88 1>;
250 clock-names = "fck";
251 assigned-clocks = <&k3_clks 88
252 assigned-clock-parents = <&k3_
253 power-domains = <&k3_pds 88 TI
254 ti,timer-pwm;
255 /* Non-MPU Firmware usage */
256 status = "reserved";
257 };
258
259 mcu_timer7: timer@40470000 {
260 compatible = "ti,am654-timer";
261 reg = <0x00 0x40470000 0x00 0x
262 interrupts = <GIC_SPI 823 IRQ_
263 clocks = <&k3_clks 89 1>;
264 clock-names = "fck";
265 assigned-clocks = <&k3_clks 89
266 assigned-clock-parents = <&k3_
267 power-domains = <&k3_pds 89 TI
268 ti,timer-pwm;
269 /* Non-MPU Firmware usage */
270 status = "reserved";
271 };
272
273 mcu_timer8: timer@40480000 {
274 compatible = "ti,am654-timer";
275 reg = <0x00 0x40480000 0x00 0x
276 interrupts = <GIC_SPI 824 IRQ_
277 clocks = <&k3_clks 90 1>;
278 clock-names = "fck";
279 assigned-clocks = <&k3_clks 90
280 assigned-clock-parents = <&k3_
281 power-domains = <&k3_pds 90 TI
282 ti,timer-pwm;
283 /* Non-MPU Firmware usage */
284 status = "reserved";
285 };
286
287 mcu_timer9: timer@40490000 {
288 compatible = "ti,am654-timer";
289 reg = <0x00 0x40490000 0x00 0x
290 interrupts = <GIC_SPI 825 IRQ_
291 clocks = <&k3_clks 91 1>;
292 clock-names = "fck";
293 assigned-clocks = <&k3_clks 91
294 assigned-clock-parents = <&k3_
295 power-domains = <&k3_pds 91 TI
296 ti,timer-pwm;
297 /* Non-MPU Firmware usage */
298 status = "reserved";
299 };
300
301 wkup_uart0: serial@42300000 {
302 compatible = "ti,j721e-uart",
303 reg = <0x00 0x42300000 0x00 0x
304 interrupts = <GIC_SPI 897 IRQ_
305 clocks = <&k3_clks 359 3>;
306 clock-names = "fclk";
307 power-domains = <&k3_pds 359 T
308 status = "disabled";
309 };
310
311 mcu_uart0: serial@40a00000 {
312 compatible = "ti,j721e-uart",
313 reg = <0x00 0x40a00000 0x00 0x
314 interrupts = <GIC_SPI 846 IRQ_
315 clocks = <&k3_clks 149 3>;
316 clock-names = "fclk";
317 power-domains = <&k3_pds 149 T
318 status = "disabled";
319 };
320
321 wkup_gpio0: gpio@42110000 {
322 compatible = "ti,j721e-gpio",
323 reg = <0x00 0x42110000 0x00 0x
324 gpio-controller;
325 #gpio-cells = <2>;
326 interrupt-parent = <&wkup_gpio
327 interrupts = <103>, <104>, <10
328 interrupt-controller;
329 #interrupt-cells = <2>;
330 ti,ngpio = <89>;
331 ti,davinci-gpio-unbanked = <0>
332 power-domains = <&k3_pds 115 T
333 clocks = <&k3_clks 115 0>;
334 clock-names = "gpio";
335 status = "disabled";
336 };
337
338 wkup_gpio1: gpio@42100000 {
339 compatible = "ti,j721e-gpio",
340 reg = <0x00 0x42100000 0x00 0x
341 gpio-controller;
342 #gpio-cells = <2>;
343 interrupt-parent = <&wkup_gpio
344 interrupts = <112>, <113>, <11
345 interrupt-controller;
346 #interrupt-cells = <2>;
347 ti,ngpio = <89>;
348 ti,davinci-gpio-unbanked = <0>
349 power-domains = <&k3_pds 116 T
350 clocks = <&k3_clks 116 0>;
351 clock-names = "gpio";
352 status = "disabled";
353 };
354
355 wkup_i2c0: i2c@42120000 {
356 compatible = "ti,j721e-i2c", "
357 reg = <0x00 0x42120000 0x00 0x
358 interrupts = <GIC_SPI 896 IRQ_
359 #address-cells = <1>;
360 #size-cells = <0>;
361 clocks = <&k3_clks 223 1>;
362 clock-names = "fck";
363 power-domains = <&k3_pds 223 T
364 status = "disabled";
365 };
366
367 mcu_i2c0: i2c@40b00000 {
368 compatible = "ti,j721e-i2c", "
369 reg = <0x00 0x40b00000 0x00 0x
370 interrupts = <GIC_SPI 852 IRQ_
371 #address-cells = <1>;
372 #size-cells = <0>;
373 clocks = <&k3_clks 221 1>;
374 clock-names = "fck";
375 power-domains = <&k3_pds 221 T
376 status = "disabled";
377 };
378
379 mcu_i2c1: i2c@40b10000 {
380 compatible = "ti,j721e-i2c", "
381 reg = <0x00 0x40b10000 0x00 0x
382 interrupts = <GIC_SPI 853 IRQ_
383 #address-cells = <1>;
384 #size-cells = <0>;
385 clocks = <&k3_clks 222 1>;
386 clock-names = "fck";
387 power-domains = <&k3_pds 222 T
388 status = "disabled";
389 };
390
391 mcu_mcan0: can@40528000 {
392 compatible = "bosch,m_can";
393 reg = <0x00 0x40528000 0x00 0x
394 <0x00 0x40500000 0x00 0x
395 reg-names = "m_can", "message_
396 power-domains = <&k3_pds 207 T
397 clocks = <&k3_clks 207 0>, <&k
398 clock-names = "hclk", "cclk";
399 interrupts = <GIC_SPI 832 IRQ_
400 <GIC_SPI 833 IRQ_
401 interrupt-names = "int0", "int
402 bosch,mram-cfg = <0x0 128 64 6
403 status = "disabled";
404 };
405
406 mcu_mcan1: can@40568000 {
407 compatible = "bosch,m_can";
408 reg = <0x00 0x40568000 0x00 0x
409 <0x00 0x40540000 0x00 0x
410 reg-names = "m_can", "message_
411 power-domains = <&k3_pds 208 T
412 clocks = <&k3_clks 208 0>, <&k
413 clock-names = "hclk", "cclk";
414 interrupts = <GIC_SPI 835 IRQ_
415 <GIC_SPI 836 IRQ_
416 interrupt-names = "int0", "int
417 bosch,mram-cfg = <0x0 128 64 6
418 status = "disabled";
419 };
420
421 mcu_spi0: spi@40300000 {
422 compatible = "ti,am654-mcspi",
423 reg = <0x00 0x040300000 0x00 0
424 interrupts = <GIC_SPI 848 IRQ_
425 #address-cells = <1>;
426 #size-cells = <0>;
427 power-domains = <&k3_pds 347 T
428 clocks = <&k3_clks 347 0>;
429 status = "disabled";
430 };
431
432 mcu_spi1: spi@40310000 {
433 compatible = "ti,am654-mcspi",
434 reg = <0x00 0x040310000 0x00 0
435 interrupts = <GIC_SPI 849 IRQ_
436 #address-cells = <1>;
437 #size-cells = <0>;
438 power-domains = <&k3_pds 348 T
439 clocks = <&k3_clks 348 0>;
440 status = "disabled";
441 };
442
443 mcu_spi2: spi@40320000 {
444 compatible = "ti,am654-mcspi",
445 reg = <0x00 0x040320000 0x00 0
446 interrupts = <GIC_SPI 850 IRQ_
447 #address-cells = <1>;
448 #size-cells = <0>;
449 power-domains = <&k3_pds 349 T
450 clocks = <&k3_clks 349 0>;
451 status = "disabled";
452 };
453
454 mcu_navss: bus@28380000 {
455 compatible = "simple-bus";
456 #address-cells = <2>;
457 #size-cells = <2>;
458 ranges = <0x00 0x28380000 0x00
459 dma-coherent;
460 dma-ranges;
461
462 ti,sci-dev-id = <267>;
463
464 mcu_ringacc: ringacc@2b800000
465 compatible = "ti,am654
466 reg = <0x0 0x2b800000
467 <0x0 0x2b000000
468 <0x0 0x28590000
469 <0x0 0x2a500000
470 <0x0 0x28440000
471 reg-names = "rt", "fif
472 ti,num-rings = <286>;
473 ti,sci-rm-range-gp-rin
474 ti,sci = <&sms>;
475 ti,sci-dev-id = <272>;
476 msi-parent = <&main_ud
477 };
478
479 mcu_udmap: dma-controller@285c
480 compatible = "ti,j721e
481 reg = <0x0 0x285c0000
482 <0x0 0x2a800000
483 <0x0 0x2aa00000
484 <0x0 0x284a0000
485 <0x0 0x284c0000
486 <0x0 0x28400000
487 reg-names = "gcfg", "r
488 "tchan", "
489 msi-parent = <&main_ud
490 #dma-cells = <1>;
491
492 ti,sci = <&sms>;
493 ti,sci-dev-id = <273>;
494 ti,ringacc = <&mcu_rin
495 ti,sci-rm-range-tchan
496
497 ti,sci-rm-range-rchan
498
499 ti,sci-rm-range-rflow
500 };
501 };
502
503 secure_proxy_mcu: mailbox@2a480000 {
504 compatible = "ti,am654-secure-
505 #mbox-cells = <1>;
506 reg-names = "target_data", "rt
507 reg = <0x00 0x2a480000 0x00 0x
508 <0x00 0x2a380000 0x00 0x
509 <0x00 0x2a400000 0x00 0x
510 /*
511 * Marked Disabled:
512 * Node is incomplete as it is
513 * firmware on non-MPU process
514 */
515 status = "disabled";
516 };
517
518 mcu_cpsw: ethernet@46000000 {
519 compatible = "ti,j721e-cpsw-nu
520 #address-cells = <2>;
521 #size-cells = <2>;
522 reg = <0x0 0x46000000 0x0 0x20
523 reg-names = "cpsw_nuss";
524 ranges = <0x0 0x0 0x0 0x460000
525 dma-coherent;
526 clocks = <&k3_clks 29 28>;
527 clock-names = "fck";
528 power-domains = <&k3_pds 29 TI
529
530 dmas = <&mcu_udmap 0xf000>,
531 <&mcu_udmap 0xf001>,
532 <&mcu_udmap 0xf002>,
533 <&mcu_udmap 0xf003>,
534 <&mcu_udmap 0xf004>,
535 <&mcu_udmap 0xf005>,
536 <&mcu_udmap 0xf006>,
537 <&mcu_udmap 0xf007>,
538 <&mcu_udmap 0x7000>;
539 dma-names = "tx0", "tx1", "tx2
540 "tx4", "tx5", "tx6
541 "rx";
542
543 ethernet-ports {
544 #address-cells = <1>;
545 #size-cells = <0>;
546
547 cpsw_port1: port@1 {
548 reg = <1>;
549 ti,mac-only;
550 label = "port1
551 ti,syscon-efus
552 phys = <&phy_g
553 };
554 };
555
556 davinci_mdio: mdio@f00 {
557 compatible = "ti,cpsw-
558 reg = <0x0 0xf00 0x0 0
559 #address-cells = <1>;
560 #size-cells = <0>;
561 clocks = <&k3_clks 29
562 clock-names = "fck";
563 bus_freq = <1000000>;
564 };
565
566 cpts@3d000 {
567 compatible = "ti,am65-
568 reg = <0x0 0x3d000 0x0
569 clocks = <&k3_clks 29
570 clock-names = "cpts";
571 assigned-clocks = <&k3
572 assigned-clock-parents
573 interrupts-extended =
574 interrupt-names = "cpt
575 ti,cpts-ext-ts-inputs
576 ti,cpts-periodic-outpu
577 };
578 };
579
580 tscadc0: tscadc@40200000 {
581 compatible = "ti,am3359-tscadc
582 reg = <0x00 0x40200000 0x00 0x
583 interrupts = <GIC_SPI 860 IRQ_
584 power-domains = <&k3_pds 0 TI_
585 clocks = <&k3_clks 0 0>;
586 assigned-clocks = <&k3_clks 0
587 assigned-clock-rates = <600000
588 clock-names = "fck";
589 dmas = <&main_udmap 0x7400>,
590 <&main_udmap 0x7401>;
591 dma-names = "fifo0", "fifo1";
592 status = "disabled";
593
594 adc {
595 #io-channel-cells = <1
596 compatible = "ti,am335
597 };
598 };
599
600 tscadc1: tscadc@40210000 {
601 compatible = "ti,am3359-tscadc
602 reg = <0x00 0x40210000 0x00 0x
603 interrupts = <GIC_SPI 861 IRQ_
604 power-domains = <&k3_pds 1 TI_
605 clocks = <&k3_clks 1 0>;
606 assigned-clocks = <&k3_clks 1
607 assigned-clock-rates = <600000
608 clock-names = "fck";
609 dmas = <&main_udmap 0x7402>,
610 <&main_udmap 0x7403>;
611 dma-names = "fifo0", "fifo1";
612 status = "disabled";
613
614 adc {
615 #io-channel-cells = <1
616 compatible = "ti,am335
617 };
618 };
619
620 fss: bus@47000000 {
621 compatible = "simple-bus";
622 #address-cells = <2>;
623 #size-cells = <2>;
624 ranges = <0x00 0x47000000 0x00
625 <0x00 0x50000000 0x00
626 <0x04 0x00000000 0x04
627
628 ospi0: spi@47040000 {
629 compatible = "ti,am654
630 reg = <0x00 0x47040000
631 <0x05 0x00000000
632 interrupts = <GIC_SPI
633 cdns,fifo-depth = <256
634 cdns,fifo-width = <4>;
635 cdns,trigger-address =
636 clocks = <&k3_clks 109
637 assigned-clocks = <&k3
638 assigned-clock-parents
639 assigned-clock-rates =
640 power-domains = <&k3_p
641 #address-cells = <1>;
642 #size-cells = <0>;
643
644 status = "disabled"; /
645 };
646
647 ospi1: spi@47050000 {
648 compatible = "ti,am654
649 reg = <0x00 0x47050000
650 <0x07 0x00000000
651 interrupts = <GIC_SPI
652 cdns,fifo-depth = <256
653 cdns,fifo-width = <4>;
654 cdns,trigger-address =
655 clocks = <&k3_clks 110
656 power-domains = <&k3_p
657 #address-cells = <1>;
658 #size-cells = <0>;
659
660 status = "disabled"; /
661 };
662 };
663
664 wkup_vtm0: temperature-sensor@42040000
665 compatible = "ti,j7200-vtm";
666 reg = <0x00 0x42040000 0x0 0x3
667 <0x00 0x42050000 0x0 0x3
668 power-domains = <&k3_pds 180 T
669 #thermal-sensor-cells = <1>;
670 };
671
672 mcu_r5fss0: r5fss@41000000 {
673 compatible = "ti,j721s2-r5fss"
674 ti,cluster-mode = <1>;
675 #address-cells = <1>;
676 #size-cells = <1>;
677 ranges = <0x41000000 0x00 0x41
678 <0x41400000 0x00 0x41
679 power-domains = <&k3_pds 283 T
680
681 mcu_r5fss0_core0: r5f@41000000
682 compatible = "ti,j721s
683 reg = <0x41000000 0x00
684 <0x41010000 0x00
685 reg-names = "atcm", "b
686 ti,sci = <&sms>;
687 ti,sci-dev-id = <284>;
688 ti,sci-proc-ids = <0x0
689 resets = <&k3_reset 28
690 firmware-name = "j721s
691 ti,atcm-enable = <1>;
692 ti,btcm-enable = <1>;
693 ti,loczrama = <1>;
694 };
695
696 mcu_r5fss0_core1: r5f@41400000
697 compatible = "ti,j721s
698 reg = <0x41400000 0x00
699 <0x41410000 0x00
700 reg-names = "atcm", "b
701 ti,sci = <&sms>;
702 ti,sci-dev-id = <285>;
703 ti,sci-proc-ids = <0x0
704 resets = <&k3_reset 28
705 firmware-name = "j721s
706 ti,atcm-enable = <1>;
707 ti,btcm-enable = <1>;
708 ti,loczrama = <1>;
709 };
710 };
711
712 mcu_esm: esm@40800000 {
713 compatible = "ti,j721e-esm";
714 reg = <0x00 0x40800000 0x00 0x
715 ti,esm-pins = <95>;
716 bootph-pre-ram;
717 };
718
719 wkup_esm: esm@42080000 {
720 compatible = "ti,j721e-esm";
721 reg = <0x00 0x42080000 0x00 0x
722 ti,esm-pins = <63>;
723 bootph-pre-ram;
724 };
725
726 /*
727 * The 2 RTI instances are couple with
728 * reserved as these will be used by t
729 */
730 mcu_watchdog0: watchdog@40600000 {
731 compatible = "ti,j7-rti-wdt";
732 reg = <0x00 0x40600000 0x00 0x
733 clocks = <&k3_clks 295 1>;
734 power-domains = <&k3_pds 295 T
735 assigned-clocks = <&k3_clks 29
736 assigned-clock-parents = <&k3_
737 /* reserved for MCU_R5F0_0 */
738 status = "reserved";
739 };
740
741 mcu_watchdog1: watchdog@40610000 {
742 compatible = "ti,j7-rti-wdt";
743 reg = <0x00 0x40610000 0x00 0x
744 clocks = <&k3_clks 296 1>;
745 power-domains = <&k3_pds 296 T
746 assigned-clocks = <&k3_clks 29
747 assigned-clock-parents = <&k3_
748 /* reserved for MCU_R5F0_1 */
749 status = "reserved";
750 };
751 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.