1 /* SPDX-License-Identifier: GPL-2.0 */ !! 1 /* SPDX-License-Identifier: GPL-2.0-or-later
>> 2 ** -*- mode: asm -*-
>> 3 **
>> 4 ** head.S -- This file contains the initial boot code for the
>> 5 ** Linux/68k kernel.
>> 6 **
>> 7 ** Copyright 1993 by Hamish Macdonald
>> 8 **
>> 9 ** 68040 fixes by Michael Rausch
>> 10 ** 68060 fixes by Roman Hodek
>> 11 ** MMU cleanup by Randy Thelen
>> 12 ** Final MMU cleanup by Roman Zippel
>> 13 **
>> 14 ** Atari support by Andreas Schwab, using ideas of Robert de Vries
>> 15 ** and Bjoern Brauel
>> 16 ** VME Support by Richard Hirst
>> 17 **
>> 18 ** 94/11/14 Andreas Schwab: put kernel at PAGESIZE
>> 19 ** 94/11/18 Andreas Schwab: remove identity mapping of STRAM for Atari
>> 20 ** ++ Bjoern & Roman: ATARI-68040 support for the Medusa
>> 21 ** 95/11/18 Richard Hirst: Added MVME166 support
>> 22 ** 96/04/26 Guenther Kelleter: fixed identity mapping for Falcon with
>> 23 ** Magnum- and FX-alternate ram
>> 24 ** 98/04/25 Phil Blundell: added HP300 support
>> 25 ** 1998/08/30 David Kilzer: Added support for font_desc structures
>> 26 ** for linux-2.1.115
>> 27 ** 1999/02/11 Richard Zidlicky: added Q40 support (initial version 99/01/01)
>> 28 ** 2004/05/13 Kars de Jong: Finalised HP300 support
>> 29 */
>> 30
>> 31 /*
>> 32 * Linux startup code.
>> 33 *
>> 34 * At this point, the boot loader has:
>> 35 * Disabled interrupts
>> 36 * Disabled caches
>> 37 * Put us in supervisor state.
>> 38 *
>> 39 * The kernel setup code takes the following steps:
>> 40 * . Raise interrupt level
>> 41 * . Set up initial kernel memory mapping.
>> 42 * . This sets up a mapping of the 4M of memory the kernel is located in.
>> 43 * . It also does a mapping of any initial machine specific areas.
>> 44 * . Enable the MMU
>> 45 * . Enable cache memories
>> 46 * . Jump to kernel startup
>> 47 *
>> 48 * Much of the file restructuring was to accomplish:
>> 49 * 1) Remove register dependency through-out the file.
>> 50 * 2) Increase use of subroutines to perform functions
>> 51 * 3) Increase readability of the code
>> 52 *
>> 53 * Of course, readability is a subjective issue, so it will never be
>> 54 * argued that that goal was accomplished. It was merely a goal.
>> 55 * A key way to help make code more readable is to give good
>> 56 * documentation. So, the first thing you will find is exhaustive
>> 57 * write-ups on the structure of the file, and the features of the
>> 58 * functional subroutines.
>> 59 *
>> 60 * General Structure:
>> 61 * ------------------
>> 62 * Without a doubt the single largest chunk of head.S is spent
>> 63 * mapping the kernel and I/O physical space into the logical range
>> 64 * for the kernel.
>> 65 * There are new subroutines and data structures to make MMU
>> 66 * support cleaner and easier to understand.
>> 67 * First, you will find a routine call "mmu_map" which maps
>> 68 * a logical to a physical region for some length given a cache
>> 69 * type on behalf of the caller. This routine makes writing the
>> 70 * actual per-machine specific code very simple.
>> 71 * A central part of the code, but not a subroutine in itself,
>> 72 * is the mmu_init code which is broken down into mapping the kernel
>> 73 * (the same for all machines) and mapping machine-specific I/O
>> 74 * regions.
>> 75 * Also, there will be a description of engaging the MMU and
>> 76 * caches.
>> 77 * You will notice that there is a chunk of code which
>> 78 * can emit the entire MMU mapping of the machine. This is present
>> 79 * only in debug modes and can be very helpful.
>> 80 * Further, there is a new console driver in head.S that is
>> 81 * also only engaged in debug mode. Currently, it's only supported
>> 82 * on the Macintosh class of machines. However, it is hoped that
>> 83 * others will plug-in support for specific machines.
>> 84 *
>> 85 * ######################################################################
>> 86 *
>> 87 * mmu_map
>> 88 * -------
>> 89 * mmu_map was written for two key reasons. First, it was clear
>> 90 * that it was very difficult to read the previous code for mapping
>> 91 * regions of memory. Second, the Macintosh required such extensive
>> 92 * memory allocations that it didn't make sense to propagate the
>> 93 * existing code any further.
>> 94 * mmu_map requires some parameters:
>> 95 *
>> 96 * mmu_map (logical, physical, length, cache_type)
>> 97 *
>> 98 * While this essentially describes the function in the abstract, you'll
>> 99 * find more indepth description of other parameters at the implementation site.
>> 100 *
>> 101 * mmu_get_root_table_entry
>> 102 * ------------------------
>> 103 * mmu_get_ptr_table_entry
>> 104 * -----------------------
>> 105 * mmu_get_page_table_entry
>> 106 * ------------------------
>> 107 *
>> 108 * These routines are used by other mmu routines to get a pointer into
>> 109 * a table, if necessary a new table is allocated. These routines are working
>> 110 * basically like pmd_alloc() and pte_alloc() in <asm/pgtable.h>. The root
>> 111 * table needs of course only to be allocated once in mmu_get_root_table_entry,
>> 112 * so that here also some mmu specific initialization is done. The second page
>> 113 * at the start of the kernel (the first page is unmapped later) is used for
>> 114 * the kernel_pg_dir. It must be at a position known at link time (as it's used
>> 115 * to initialize the init task struct) and since it needs special cache
>> 116 * settings, it's the easiest to use this page, the rest of the page is used
>> 117 * for further pointer tables.
>> 118 * mmu_get_page_table_entry allocates always a whole page for page tables, this
>> 119 * means 1024 pages and so 4MB of memory can be mapped. It doesn't make sense
>> 120 * to manage page tables in smaller pieces as nearly all mappings have that
>> 121 * size.
>> 122 *
>> 123 * ######################################################################
>> 124 *
>> 125 *
>> 126 * ######################################################################
>> 127 *
>> 128 * mmu_engage
>> 129 * ----------
>> 130 * Thanks to a small helping routine enabling the mmu got quite simple
>> 131 * and there is only one way left. mmu_engage makes a complete a new mapping
>> 132 * that only includes the absolute necessary to be able to jump to the final
>> 133 * position and to restore the original mapping.
>> 134 * As this code doesn't need a transparent translation register anymore this
>> 135 * means all registers are free to be used by machines that needs them for
>> 136 * other purposes.
>> 137 *
>> 138 * ######################################################################
>> 139 *
>> 140 * mmu_print
>> 141 * ---------
>> 142 * This algorithm will print out the page tables of the system as
>> 143 * appropriate for an 030 or an 040. This is useful for debugging purposes
>> 144 * and as such is enclosed in #ifdef MMU_PRINT/#endif clauses.
>> 145 *
>> 146 * ######################################################################
>> 147 *
>> 148 * console_init
>> 149 * ------------
>> 150 * The console is also able to be turned off. The console in head.S
>> 151 * is specifically for debugging and can be very useful. It is surrounded by
>> 152 * #ifdef / #endif clauses so it doesn't have to ship in known-good
>> 153 * kernels. It's basic algorithm is to determine the size of the screen
>> 154 * (in height/width and bit depth) and then use that information for
>> 155 * displaying an 8x8 font or an 8x16 (widthxheight). I prefer the 8x8 for
>> 156 * debugging so I can see more good data. But it was trivial to add support
>> 157 * for both fonts, so I included it.
>> 158 * Also, the algorithm for plotting pixels is abstracted so that in
>> 159 * theory other platforms could add support for different kinds of frame
>> 160 * buffers. This could be very useful.
>> 161 *
>> 162 * console_put_penguin
>> 163 * -------------------
>> 164 * An important part of any Linux bring up is the penguin and there's
>> 165 * nothing like getting the Penguin on the screen! This algorithm will work
>> 166 * on any machine for which there is a console_plot_pixel.
>> 167 *
>> 168 * console_scroll
>> 169 * --------------
>> 170 * My hope is that the scroll algorithm does the right thing on the
>> 171 * various platforms, but it wouldn't be hard to add the test conditions
>> 172 * and new code if it doesn't.
>> 173 *
>> 174 * console_putc
>> 175 * -------------
>> 176 *
>> 177 * ######################################################################
>> 178 *
>> 179 * Register usage has greatly simplified within head.S. Every subroutine
>> 180 * saves and restores all registers that it modifies (except it returns a
>> 181 * value in there of course). So the only register that needs to be initialized
>> 182 * is the stack pointer.
>> 183 * All other init code and data is now placed in the init section, so it will
>> 184 * be automatically freed at the end of the kernel initialization.
>> 185 *
>> 186 * ######################################################################
>> 187 *
>> 188 * options
>> 189 * -------
>> 190 * There are many options available in a build of this file. I've
>> 191 * taken the time to describe them here to save you the time of searching
>> 192 * for them and trying to understand what they mean.
>> 193 *
>> 194 * CONFIG_xxx: These are the obvious machine configuration defines created
>> 195 * during configuration. These are defined in autoconf.h.
>> 196 *
>> 197 * CONSOLE_DEBUG: Only supports a Mac frame buffer but could easily be
>> 198 * extended to support other platforms.
>> 199 *
>> 200 * TEST_MMU: This is a test harness for running on any given machine but
>> 201 * getting an MMU dump for another class of machine. The classes of machines
>> 202 * that can be tested are any of the makes (Atari, Amiga, Mac, VME, etc.)
>> 203 * and any of the models (030, 040, 060, etc.).
>> 204 *
>> 205 * NOTE: TEST_MMU is NOT permanent! It is scheduled to be removed
>> 206 * When head.S boots on Atari, Amiga, Macintosh, and VME
>> 207 * machines. At that point the underlying logic will be
>> 208 * believed to be solid enough to be trusted, and TEST_MMU
>> 209 * can be dropped. Do note that that will clean up the
>> 210 * head.S code significantly as large blocks of #if/#else
>> 211 * clauses can be removed.
>> 212 *
>> 213 * MMU_NOCACHE_KERNEL: On the Macintosh platform there was an inquiry into
>> 214 * determing why devices don't appear to work. A test case was to remove
>> 215 * the cacheability of the kernel bits.
>> 216 *
>> 217 * MMU_PRINT: There is a routine built into head.S that can display the
>> 218 * MMU data structures. It outputs its result through the serial_putc
>> 219 * interface. So where ever that winds up driving data, that's where the
>> 220 * mmu struct will appear.
>> 221 *
>> 222 * SERIAL_DEBUG: There are a series of putc() macro statements
>> 223 * scattered through out the code to give progress of status to the
>> 224 * person sitting at the console. This constant determines whether those
>> 225 * are used.
>> 226 *
>> 227 * DEBUG: This is the standard DEBUG flag that can be set for building
>> 228 * the kernel. It has the effect adding additional tests into
>> 229 * the code.
>> 230 *
>> 231 * FONT_6x11:
>> 232 * FONT_8x8:
>> 233 * FONT_8x16:
>> 234 * In theory these could be determined at run time or handed
>> 235 * over by the booter. But, let's be real, it's a fine hard
>> 236 * coded value. (But, you will notice the code is run-time
>> 237 * flexible!) A pointer to the font's struct font_desc
>> 238 * is kept locally in Lconsole_font. It is used to determine
>> 239 * font size information dynamically.
>> 240 *
>> 241 * Atari constants:
>> 242 * USE_PRINTER: Use the printer port for serial debug.
>> 243 * USE_SCC_B: Use the SCC port A (Serial2) for serial debug.
>> 244 * USE_SCC_A: Use the SCC port B (Modem2) for serial debug.
>> 245 * USE_MFP: Use the ST-MFP port (Modem1) for serial debug.
>> 246 *
>> 247 * Macintosh constants:
>> 248 * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug.
>> 249 * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug.
>> 250 */
2 251
3 #include <linux/linkage.h> 252 #include <linux/linkage.h>
4 #include <linux/init.h> 253 #include <linux/init.h>
>> 254 #include <linux/pgtable.h>
>> 255 #include <asm/bootinfo.h>
>> 256 #include <asm/bootinfo-amiga.h>
>> 257 #include <asm/bootinfo-atari.h>
>> 258 #include <asm/bootinfo-hp300.h>
>> 259 #include <asm/bootinfo-mac.h>
>> 260 #include <asm/bootinfo-q40.h>
>> 261 #include <asm/bootinfo-virt.h>
>> 262 #include <asm/bootinfo-vme.h>
>> 263 #include <asm/setup.h>
>> 264 #include <asm/entry.h>
5 #include <asm/page.h> 265 #include <asm/page.h>
6 #include <abi/entry.h> !! 266 #include <asm/asm-offsets.h>
>> 267 #ifdef CONFIG_MAC
>> 268 # include <asm/machw.h>
>> 269 #endif
>> 270
>> 271 #ifdef CONFIG_EARLY_PRINTK
>> 272 # define SERIAL_DEBUG
>> 273 # if defined(CONFIG_MAC) && defined(CONFIG_FONT_SUPPORT)
>> 274 # define CONSOLE_DEBUG
>> 275 # endif
>> 276 #endif
>> 277
>> 278 #undef MMU_PRINT
>> 279 #undef MMU_NOCACHE_KERNEL
>> 280 #undef DEBUG
>> 281
>> 282 /*
>> 283 * For the head.S console, there are three supported fonts, 6x11, 8x16 and 8x8.
>> 284 * The 8x8 font is harder to read but fits more on the screen.
>> 285 */
>> 286 #define FONT_8x8 /* default */
>> 287 /* #define FONT_8x16 */ /* 2nd choice */
>> 288 /* #define FONT_6x11 */ /* 3rd choice */
>> 289
>> 290 .globl kernel_pg_dir
>> 291 .globl availmem
>> 292 .globl m68k_init_mapped_size
>> 293 .globl m68k_pgtable_cachemode
>> 294 .globl m68k_supervisor_cachemode
>> 295 #ifdef CONFIG_MVME16x
>> 296 .globl mvme_bdid
>> 297 #endif
>> 298 #ifdef CONFIG_Q40
>> 299 .globl q40_mem_cptr
>> 300 #endif
>> 301
>> 302 CPUTYPE_040 = 1 /* indicates an 040 */
>> 303 CPUTYPE_060 = 2 /* indicates an 060 */
>> 304 CPUTYPE_0460 = 3 /* if either above are set, this is set */
>> 305 CPUTYPE_020 = 4 /* indicates an 020 */
>> 306
>> 307 /* Translation control register */
>> 308 TC_ENABLE = 0x8000
>> 309 TC_PAGE8K = 0x4000
>> 310 TC_PAGE4K = 0x0000
>> 311
>> 312 /* Transparent translation registers */
>> 313 TTR_ENABLE = 0x8000 /* enable transparent translation */
>> 314 TTR_ANYMODE = 0x4000 /* user and kernel mode access */
>> 315 TTR_KERNELMODE = 0x2000 /* only kernel mode access */
>> 316 TTR_USERMODE = 0x0000 /* only user mode access */
>> 317 TTR_CI = 0x0400 /* inhibit cache */
>> 318 TTR_RW = 0x0200 /* read/write mode */
>> 319 TTR_RWM = 0x0100 /* read/write mask */
>> 320 TTR_FCB2 = 0x0040 /* function code base bit 2 */
>> 321 TTR_FCB1 = 0x0020 /* function code base bit 1 */
>> 322 TTR_FCB0 = 0x0010 /* function code base bit 0 */
>> 323 TTR_FCM2 = 0x0004 /* function code mask bit 2 */
>> 324 TTR_FCM1 = 0x0002 /* function code mask bit 1 */
>> 325 TTR_FCM0 = 0x0001 /* function code mask bit 0 */
>> 326
>> 327 /* Cache Control registers */
>> 328 CC6_ENABLE_D = 0x80000000 /* enable data cache (680[46]0) */
>> 329 CC6_FREEZE_D = 0x40000000 /* freeze data cache (68060) */
>> 330 CC6_ENABLE_SB = 0x20000000 /* enable store buffer (68060) */
>> 331 CC6_PUSH_DPI = 0x10000000 /* disable CPUSH invalidation (68060) */
>> 332 CC6_HALF_D = 0x08000000 /* half-cache mode for data cache (68060) */
>> 333 CC6_ENABLE_B = 0x00800000 /* enable branch cache (68060) */
>> 334 CC6_CLRA_B = 0x00400000 /* clear all entries in branch cache (68060) */
>> 335 CC6_CLRU_B = 0x00200000 /* clear user entries in branch cache (68060) */
>> 336 CC6_ENABLE_I = 0x00008000 /* enable instruction cache (680[46]0) */
>> 337 CC6_FREEZE_I = 0x00004000 /* freeze instruction cache (68060) */
>> 338 CC6_HALF_I = 0x00002000 /* half-cache mode for instruction cache (68060) */
>> 339 CC3_ALLOC_WRITE = 0x00002000 /* write allocate mode(68030) */
>> 340 CC3_ENABLE_DB = 0x00001000 /* enable data burst (68030) */
>> 341 CC3_CLR_D = 0x00000800 /* clear data cache (68030) */
>> 342 CC3_CLRE_D = 0x00000400 /* clear entry in data cache (68030) */
>> 343 CC3_FREEZE_D = 0x00000200 /* freeze data cache (68030) */
>> 344 CC3_ENABLE_D = 0x00000100 /* enable data cache (68030) */
>> 345 CC3_ENABLE_IB = 0x00000010 /* enable instruction burst (68030) */
>> 346 CC3_CLR_I = 0x00000008 /* clear instruction cache (68030) */
>> 347 CC3_CLRE_I = 0x00000004 /* clear entry in instruction cache (68030) */
>> 348 CC3_FREEZE_I = 0x00000002 /* freeze instruction cache (68030) */
>> 349 CC3_ENABLE_I = 0x00000001 /* enable instruction cache (68030) */
>> 350
>> 351 /* Miscellaneous definitions */
>> 352 PAGESIZE = 4096
>> 353 PAGESHIFT = 12
>> 354
>> 355 ROOT_TABLE_SIZE = 128
>> 356 PTR_TABLE_SIZE = 128
>> 357 PAGE_TABLE_SIZE = 64
>> 358 ROOT_INDEX_SHIFT = 25
>> 359 PTR_INDEX_SHIFT = 18
>> 360 PAGE_INDEX_SHIFT = 12
>> 361
>> 362 #ifdef DEBUG
>> 363 /* When debugging use readable names for labels */
>> 364 #ifdef __STDC__
>> 365 #define L(name) .head.S.##name
>> 366 #else
>> 367 #define L(name) .head.S./**/name
>> 368 #endif
>> 369 #else
>> 370 #ifdef __STDC__
>> 371 #define L(name) .L##name
>> 372 #else
>> 373 #define L(name) .L/**/name
>> 374 #endif
>> 375 #endif
>> 376
>> 377 /* The __INITDATA stuff is a no-op when ftrace or kgdb are turned on */
>> 378 #ifndef __INITDATA
>> 379 #define __INITDATA .data
>> 380 #define __FINIT .previous
>> 381 #endif
>> 382
>> 383 /* Several macros to make the writing of subroutines easier:
>> 384 * - func_start marks the beginning of the routine which setups the frame
>> 385 * register and saves the registers, it also defines another macro
>> 386 * to automatically restore the registers again.
>> 387 * - func_return marks the end of the routine and simply calls the prepared
>> 388 * macro to restore registers and jump back to the caller.
>> 389 * - func_define generates another macro to automatically put arguments
>> 390 * onto the stack call the subroutine and cleanup the stack again.
>> 391 */
>> 392
>> 393 /* Within subroutines these macros can be used to access the arguments
>> 394 * on the stack. With STACK some allocated memory on the stack can be
>> 395 * accessed and ARG0 points to the return address (used by mmu_engage).
>> 396 */
>> 397 #define STACK %a6@(stackstart)
>> 398 #define ARG0 %a6@(4)
>> 399 #define ARG1 %a6@(8)
>> 400 #define ARG2 %a6@(12)
>> 401 #define ARG3 %a6@(16)
>> 402 #define ARG4 %a6@(20)
>> 403
>> 404 .macro func_start name,saveregs,stack=0
>> 405 L(\name):
>> 406 linkw %a6,#-\stack
>> 407 moveml \saveregs,%sp@-
>> 408 .set stackstart,-\stack
>> 409
>> 410 .macro func_return_\name
>> 411 moveml %sp@+,\saveregs
>> 412 unlk %a6
>> 413 rts
>> 414 .endm
>> 415 .endm
>> 416
>> 417 .macro func_return name
>> 418 func_return_\name
>> 419 .endm
>> 420
>> 421 .macro func_call name
>> 422 jbsr L(\name)
>> 423 .endm
>> 424
>> 425 .macro move_stack nr,arg1,arg2,arg3,arg4
>> 426 .if \nr
>> 427 move_stack "(\nr-1)",\arg2,\arg3,\arg4
>> 428 movel \arg1,%sp@-
>> 429 .endif
>> 430 .endm
>> 431
>> 432 .macro func_define name,nr=0
>> 433 .macro \name arg1,arg2,arg3,arg4
>> 434 move_stack \nr,\arg1,\arg2,\arg3,\arg4
>> 435 func_call \name
>> 436 .if \nr
>> 437 lea %sp@(\nr*4),%sp
>> 438 .endif
>> 439 .endm
>> 440 .endm
>> 441
>> 442 func_define mmu_map,4
>> 443 func_define mmu_map_tt,4
>> 444 func_define mmu_fixup_page_mmu_cache,1
>> 445 func_define mmu_temp_map,2
>> 446 func_define mmu_engage
>> 447 func_define mmu_get_root_table_entry,1
>> 448 func_define mmu_get_ptr_table_entry,2
>> 449 func_define mmu_get_page_table_entry,2
>> 450 func_define mmu_print
>> 451 func_define get_new_page
>> 452 #if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
>> 453 func_define set_leds
>> 454 #endif
>> 455
>> 456 .macro mmu_map_eq arg1,arg2,arg3
>> 457 mmu_map \arg1,\arg1,\arg2,\arg3
>> 458 .endm
>> 459
>> 460 .macro get_bi_record record
>> 461 pea \record
>> 462 func_call get_bi_record
>> 463 addql #4,%sp
>> 464 .endm
>> 465
>> 466 func_define serial_putc,1
>> 467 func_define console_putc,1
>> 468
>> 469 func_define console_init
>> 470 func_define console_put_penguin
>> 471 func_define console_plot_pixel,3
>> 472 func_define console_scroll
>> 473
>> 474 .macro putc ch
>> 475 #if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
>> 476 pea \ch
>> 477 #endif
>> 478 #ifdef CONSOLE_DEBUG
>> 479 func_call console_putc
>> 480 #endif
>> 481 #ifdef SERIAL_DEBUG
>> 482 func_call serial_putc
>> 483 #endif
>> 484 #if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
>> 485 addql #4,%sp
>> 486 #endif
>> 487 .endm
>> 488
>> 489 .macro dputc ch
>> 490 #ifdef DEBUG
>> 491 putc \ch
>> 492 #endif
>> 493 .endm
>> 494
>> 495 func_define putn,1
>> 496
>> 497 .macro dputn nr
>> 498 #ifdef DEBUG
>> 499 putn \nr
>> 500 #endif
>> 501 .endm
>> 502
>> 503 .macro puts string
>> 504 #if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
>> 505 __INITDATA
>> 506 .Lstr\@:
>> 507 .string "\string"
>> 508 __FINIT
>> 509 pea %pc@(.Lstr\@)
>> 510 func_call puts
>> 511 addql #4,%sp
>> 512 #endif
>> 513 .endm
>> 514
>> 515 .macro dputs string
>> 516 #ifdef DEBUG
>> 517 puts "\string"
>> 518 #endif
>> 519 .endm
>> 520
>> 521 #define is_not_amiga(lab) cmpl &MACH_AMIGA,%pc@(m68k_machtype); jne lab
>> 522 #define is_not_atari(lab) cmpl &MACH_ATARI,%pc@(m68k_machtype); jne lab
>> 523 #define is_not_mac(lab) cmpl &MACH_MAC,%pc@(m68k_machtype); jne lab
>> 524 #define is_not_mvme147(lab) cmpl &MACH_MVME147,%pc@(m68k_machtype); jne lab
>> 525 #define is_not_mvme16x(lab) cmpl &MACH_MVME16x,%pc@(m68k_machtype); jne lab
>> 526 #define is_not_bvme6000(lab) cmpl &MACH_BVME6000,%pc@(m68k_machtype); jne lab
>> 527 #define is_mvme147(lab) cmpl &MACH_MVME147,%pc@(m68k_machtype); jeq lab
>> 528 #define is_mvme16x(lab) cmpl &MACH_MVME16x,%pc@(m68k_machtype); jeq lab
>> 529 #define is_bvme6000(lab) cmpl &MACH_BVME6000,%pc@(m68k_machtype); jeq lab
>> 530 #define is_not_hp300(lab) cmpl &MACH_HP300,%pc@(m68k_machtype); jne lab
>> 531 #define is_not_apollo(lab) cmpl &MACH_APOLLO,%pc@(m68k_machtype); jne lab
>> 532 #define is_not_q40(lab) cmpl &MACH_Q40,%pc@(m68k_machtype); jne lab
>> 533 #define is_not_sun3x(lab) cmpl &MACH_SUN3X,%pc@(m68k_machtype); jne lab
>> 534 #define is_not_virt(lab) cmpl &MACH_VIRT,%pc@(m68k_machtype); jne lab
>> 535
>> 536 #define hasnt_leds(lab) cmpl &MACH_HP300,%pc@(m68k_machtype); \
>> 537 jeq 42f; \
>> 538 cmpl &MACH_APOLLO,%pc@(m68k_machtype); \
>> 539 jne lab ;\
>> 540 42:\
>> 541
>> 542 #define is_040_or_060(lab) btst &CPUTYPE_0460,%pc@(L(cputype)+3); jne lab
>> 543 #define is_not_040_or_060(lab) btst &CPUTYPE_0460,%pc@(L(cputype)+3); jeq lab
>> 544 #define is_040(lab) btst &CPUTYPE_040,%pc@(L(cputype)+3); jne lab
>> 545 #define is_060(lab) btst &CPUTYPE_060,%pc@(L(cputype)+3); jne lab
>> 546 #define is_not_060(lab) btst &CPUTYPE_060,%pc@(L(cputype)+3); jeq lab
>> 547 #define is_020(lab) btst &CPUTYPE_020,%pc@(L(cputype)+3); jne lab
>> 548 #define is_not_020(lab) btst &CPUTYPE_020,%pc@(L(cputype)+3); jeq lab
>> 549
>> 550 /* On the HP300 we use the on-board LEDs for debug output before
>> 551 the console is running. Writing a 1 bit turns the corresponding LED
>> 552 _off_ - on the 340 bit 7 is towards the back panel of the machine. */
>> 553 .macro leds mask
>> 554 #if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
>> 555 hasnt_leds(.Lled\@)
>> 556 pea \mask
>> 557 func_call set_leds
>> 558 addql #4,%sp
>> 559 .Lled\@:
>> 560 #endif
>> 561 .endm
7 562
8 __HEAD 563 __HEAD
>> 564 ENTRY(_stext)
>> 565 /*
>> 566 * Version numbers of the bootinfo interface
>> 567 * The area from _stext to _start will later be used as kernel pointer table
>> 568 */
>> 569 bras 1f /* Jump over bootinfo version numbers */
>> 570
>> 571 .long BOOTINFOV_MAGIC
>> 572 .long MACH_AMIGA, AMIGA_BOOTI_VERSION
>> 573 .long MACH_ATARI, ATARI_BOOTI_VERSION
>> 574 .long MACH_MVME147, MVME147_BOOTI_VERSION
>> 575 .long MACH_MVME16x, MVME16x_BOOTI_VERSION
>> 576 .long MACH_BVME6000, BVME6000_BOOTI_VERSION
>> 577 .long MACH_MAC, MAC_BOOTI_VERSION
>> 578 .long MACH_Q40, Q40_BOOTI_VERSION
>> 579 .long MACH_HP300, HP300_BOOTI_VERSION
>> 580 .long 0
>> 581 1: jra __start
>> 582
>> 583 .equ kernel_pg_dir,_stext
>> 584
>> 585 .equ .,_stext+PAGESIZE
>> 586
9 ENTRY(_start) 587 ENTRY(_start)
10 SETUP_MMU !! 588 jra __start
>> 589 __INIT
>> 590 ENTRY(__start)
>> 591 /*
>> 592 * Setup initial stack pointer
>> 593 */
>> 594 lea %pc@(_stext),%sp
>> 595
>> 596 /*
>> 597 * Record the CPU and machine type.
>> 598 */
>> 599 get_bi_record BI_MACHTYPE
>> 600 lea %pc@(m68k_machtype),%a1
>> 601 movel %a0@,%a1@
>> 602
>> 603 get_bi_record BI_FPUTYPE
>> 604 lea %pc@(m68k_fputype),%a1
>> 605 movel %a0@,%a1@
>> 606
>> 607 get_bi_record BI_MMUTYPE
>> 608 lea %pc@(m68k_mmutype),%a1
>> 609 movel %a0@,%a1@
>> 610
>> 611 get_bi_record BI_CPUTYPE
>> 612 lea %pc@(m68k_cputype),%a1
>> 613 movel %a0@,%a1@
>> 614
>> 615 leds 0x1
>> 616
>> 617 #ifdef CONFIG_MAC
>> 618 /*
>> 619 * For Macintosh, we need to determine the display parameters early (at least
>> 620 * while debugging it).
>> 621 */
>> 622
>> 623 is_not_mac(L(test_notmac))
>> 624
>> 625 get_bi_record BI_MAC_VADDR
>> 626 lea %pc@(L(mac_videobase)),%a1
>> 627 movel %a0@,%a1@
>> 628
>> 629 get_bi_record BI_MAC_VDEPTH
>> 630 lea %pc@(L(mac_videodepth)),%a1
>> 631 movel %a0@,%a1@
>> 632
>> 633 get_bi_record BI_MAC_VDIM
>> 634 lea %pc@(L(mac_dimensions)),%a1
>> 635 movel %a0@,%a1@
>> 636
>> 637 get_bi_record BI_MAC_VROW
>> 638 lea %pc@(L(mac_rowbytes)),%a1
>> 639 movel %a0@,%a1@
>> 640
>> 641 get_bi_record BI_MAC_SCCBASE
>> 642 lea %pc@(L(mac_sccbase)),%a1
>> 643 movel %a0@,%a1@
>> 644
>> 645 L(test_notmac):
>> 646 #endif /* CONFIG_MAC */
>> 647
>> 648 #ifdef CONFIG_VIRT
>> 649 is_not_virt(L(test_notvirt))
>> 650
>> 651 get_bi_record BI_VIRT_GF_TTY_BASE
>> 652 lea %pc@(L(virt_gf_tty_base)),%a1
>> 653 movel %a0@,%a1@
>> 654 L(test_notvirt):
>> 655 #endif /* CONFIG_VIRT */
>> 656
>> 657 /*
>> 658 * There are ultimately two pieces of information we want for all kinds of
>> 659 * processors CpuType and CacheBits. The CPUTYPE was passed in from booter
>> 660 * and is converted here from a booter type definition to a separate bit
>> 661 * number which allows for the standard is_0x0 macro tests.
>> 662 */
>> 663 movel %pc@(m68k_cputype),%d0
>> 664 /*
>> 665 * Assume it's an 030
>> 666 */
>> 667 clrl %d1
>> 668
>> 669 /*
>> 670 * Test the BootInfo cputype for 060
>> 671 */
>> 672 btst #CPUB_68060,%d0
>> 673 jeq 1f
>> 674 bset #CPUTYPE_060,%d1
>> 675 bset #CPUTYPE_0460,%d1
>> 676 jra 3f
>> 677 1:
>> 678 /*
>> 679 * Test the BootInfo cputype for 040
>> 680 */
>> 681 btst #CPUB_68040,%d0
>> 682 jeq 2f
>> 683 bset #CPUTYPE_040,%d1
>> 684 bset #CPUTYPE_0460,%d1
>> 685 jra 3f
>> 686 2:
>> 687 /*
>> 688 * Test the BootInfo cputype for 020
>> 689 */
>> 690 btst #CPUB_68020,%d0
>> 691 jeq 3f
>> 692 bset #CPUTYPE_020,%d1
>> 693 jra 3f
>> 694 3:
>> 695 /*
>> 696 * Record the cpu type
>> 697 */
>> 698 lea %pc@(L(cputype)),%a0
>> 699 movel %d1,%a0@
>> 700
>> 701 /*
>> 702 * NOTE:
>> 703 *
>> 704 * Now the macros are valid:
>> 705 * is_040_or_060
>> 706 * is_not_040_or_060
>> 707 * is_040
>> 708 * is_060
>> 709 * is_not_060
>> 710 */
>> 711
>> 712 /*
>> 713 * Determine the cache mode for pages holding MMU tables
>> 714 * and for supervisor mode, unused for '020 and '030
>> 715 */
>> 716 clrl %d0
>> 717 clrl %d1
>> 718
>> 719 is_not_040_or_060(L(save_cachetype))
>> 720
>> 721 /*
>> 722 * '040 or '060
>> 723 * d1 := cacheable write-through
>> 724 * NOTE: The 68040 manual strongly recommends non-cached for MMU tables,
>> 725 * but we have been using write-through since at least 2.0.29 so I
>> 726 * guess it is OK.
>> 727 */
>> 728 #ifdef CONFIG_060_WRITETHROUGH
>> 729 /*
>> 730 * If this is a 68060 board using drivers with cache coherency
>> 731 * problems, then supervisor memory accesses need to be write-through
>> 732 * also; otherwise, we want copyback.
>> 733 */
>> 734
>> 735 is_not_060(1f)
>> 736 movel #_PAGE_CACHE040W,%d0
>> 737 jra L(save_cachetype)
>> 738 #endif /* CONFIG_060_WRITETHROUGH */
>> 739 1:
>> 740 movew #_PAGE_CACHE040,%d0
>> 741
>> 742 movel #_PAGE_CACHE040W,%d1
>> 743
>> 744 L(save_cachetype):
>> 745 /* Save cache mode for supervisor mode and page tables
>> 746 */
>> 747 lea %pc@(m68k_supervisor_cachemode),%a0
>> 748 movel %d0,%a0@
>> 749 lea %pc@(m68k_pgtable_cachemode),%a0
>> 750 movel %d1,%a0@
>> 751
>> 752 /*
>> 753 * raise interrupt level
>> 754 */
>> 755 movew #0x2700,%sr
>> 756
>> 757 /*
>> 758 If running on an Atari, determine the I/O base of the
>> 759 serial port and test if we are running on a Medusa or Hades.
>> 760 This test is necessary here, because on the Hades the serial
>> 761 port is only accessible in the high I/O memory area.
>> 762
>> 763 The test whether it is a Medusa is done by writing to the byte at
>> 764 phys. 0x0. This should result in a bus error on all other machines.
>> 765
>> 766 ...should, but doesn't. The Afterburner040 for the Falcon has the
>> 767 same behaviour (0x0..0x7 are no ROM shadow). So we have to do
>> 768 another test to distinguish Medusa and AB040. This is a
>> 769 read attempt for 0x00ff82fe phys. that should bus error on a Falcon
>> 770 (+AB040), but is in the range where the Medusa always asserts DTACK.
>> 771
>> 772 The test for the Hades is done by reading address 0xb0000000. This
>> 773 should give a bus error on the Medusa.
>> 774 */
>> 775
>> 776 #ifdef CONFIG_ATARI
>> 777 is_not_atari(L(notypetest))
>> 778
>> 779 /* get special machine type (Medusa/Hades/AB40) */
>> 780 moveq #0,%d3 /* default if tag doesn't exist */
>> 781 get_bi_record BI_ATARI_MCH_TYPE
>> 782 tstl %d0
>> 783 jbmi 1f
>> 784 movel %a0@,%d3
>> 785 lea %pc@(atari_mch_type),%a0
>> 786 movel %d3,%a0@
>> 787 1:
>> 788 /* On the Hades, the iobase must be set up before opening the
>> 789 * serial port. There are no I/O regs at 0x00ffxxxx at all. */
>> 790 moveq #0,%d0
>> 791 cmpl #ATARI_MACH_HADES,%d3
>> 792 jbne 1f
>> 793 movel #0xff000000,%d0 /* Hades I/O base addr: 0xff000000 */
>> 794 1: lea %pc@(L(iobase)),%a0
>> 795 movel %d0,%a0@
>> 796
>> 797 L(notypetest):
>> 798 #endif
>> 799
>> 800 #ifdef CONFIG_VME
>> 801 is_mvme147(L(getvmetype))
>> 802 is_bvme6000(L(getvmetype))
>> 803 is_not_mvme16x(L(gvtdone))
>> 804
>> 805 /* See if the loader has specified the BI_VME_TYPE tag. Recent
>> 806 * versions of VMELILO and TFTPLILO do this. We have to do this
>> 807 * early so we know how to handle console output. If the tag
>> 808 * doesn't exist then we use the Bug for output on MVME16x.
>> 809 */
>> 810 L(getvmetype):
>> 811 get_bi_record BI_VME_TYPE
>> 812 tstl %d0
>> 813 jbmi 1f
>> 814 movel %a0@,%d3
>> 815 lea %pc@(vme_brdtype),%a0
>> 816 movel %d3,%a0@
>> 817 1:
>> 818 #ifdef CONFIG_MVME16x
>> 819 is_not_mvme16x(L(gvtdone))
>> 820
>> 821 /* Need to get the BRD_ID info to differentiate between 162, 167,
>> 822 * etc. This is available as a BI_VME_BRDINFO tag with later
>> 823 * versions of VMELILO and TFTPLILO, otherwise we call the Bug.
>> 824 */
>> 825 get_bi_record BI_VME_BRDINFO
>> 826 tstl %d0
>> 827 jpl 1f
>> 828
>> 829 /* Get pointer to board ID data from Bug */
>> 830 movel %d2,%sp@-
>> 831 trap #15
>> 832 .word 0x70 /* trap 0x70 - .BRD_ID */
>> 833 movel %sp@+,%a0
>> 834 1:
>> 835 lea %pc@(mvme_bdid),%a1
>> 836 /* Structure is 32 bytes long */
>> 837 movel %a0@+,%a1@+
>> 838 movel %a0@+,%a1@+
>> 839 movel %a0@+,%a1@+
>> 840 movel %a0@+,%a1@+
>> 841 movel %a0@+,%a1@+
>> 842 movel %a0@+,%a1@+
>> 843 movel %a0@+,%a1@+
>> 844 movel %a0@+,%a1@+
>> 845 #endif
>> 846
>> 847 L(gvtdone):
>> 848
>> 849 #endif
>> 850
>> 851 #ifdef CONFIG_HP300
>> 852 is_not_hp300(L(nothp))
>> 853
>> 854 /* Get the address of the UART for serial debugging */
>> 855 get_bi_record BI_HP300_UART_ADDR
>> 856 tstl %d0
>> 857 jbmi 1f
>> 858 movel %a0@,%d3
>> 859 lea %pc@(L(uartbase)),%a0
>> 860 movel %d3,%a0@
>> 861 get_bi_record BI_HP300_UART_SCODE
>> 862 tstl %d0
>> 863 jbmi 1f
>> 864 movel %a0@,%d3
>> 865 lea %pc@(L(uart_scode)),%a0
>> 866 movel %d3,%a0@
>> 867 1:
>> 868 L(nothp):
>> 869 #endif
>> 870
>> 871 /*
>> 872 * Initialize serial port
>> 873 */
>> 874 jbsr L(serial_init)
>> 875
>> 876 /*
>> 877 * Initialize console
>> 878 */
>> 879 #ifdef CONFIG_MAC
>> 880 is_not_mac(L(nocon))
>> 881 # ifdef CONSOLE_DEBUG
>> 882 console_init
>> 883 # ifdef CONFIG_LOGO
>> 884 console_put_penguin
>> 885 # endif /* CONFIG_LOGO */
>> 886 # endif /* CONSOLE_DEBUG */
>> 887 L(nocon):
>> 888 #endif /* CONFIG_MAC */
>> 889
>> 890
>> 891 putc '\n'
>> 892 putc 'A'
>> 893 leds 0x2
>> 894 dputn %pc@(L(cputype))
>> 895 dputn %pc@(m68k_supervisor_cachemode)
>> 896 dputn %pc@(m68k_pgtable_cachemode)
>> 897 dputc '\n'
>> 898
>> 899 /*
>> 900 * Save physical start address of kernel
>> 901 */
>> 902 lea %pc@(L(phys_kernel_start)),%a0
>> 903 lea %pc@(_stext),%a1
>> 904 subl #_stext,%a1
>> 905 addl #PAGE_OFFSET,%a1
>> 906 movel %a1,%a0@
>> 907
>> 908 putc 'B'
>> 909
>> 910 leds 0x4
>> 911
>> 912 /*
>> 913 * mmu_init
>> 914 *
>> 915 * This block of code does what's necessary to map in the various kinds
>> 916 * of machines for execution of Linux.
>> 917 * First map the first 4, 8, or 16 MB of kernel code & data
>> 918 */
>> 919
>> 920 get_bi_record BI_MEMCHUNK
>> 921 movel %a0@(4),%d0
>> 922 movel #16*1024*1024,%d1
>> 923 cmpl %d0,%d1
>> 924 jls 1f
>> 925 lsrl #1,%d1
>> 926 cmpl %d0,%d1
>> 927 jls 1f
>> 928 lsrl #1,%d1
>> 929 1:
>> 930 lea %pc@(m68k_init_mapped_size),%a0
>> 931 movel %d1,%a0@
>> 932 mmu_map #PAGE_OFFSET,%pc@(L(phys_kernel_start)),%d1,\
>> 933 %pc@(m68k_supervisor_cachemode)
>> 934
>> 935 putc 'C'
>> 936
>> 937 #ifdef CONFIG_AMIGA
>> 938
>> 939 L(mmu_init_amiga):
>> 940
>> 941 is_not_amiga(L(mmu_init_not_amiga))
>> 942 /*
>> 943 * mmu_init_amiga
>> 944 */
>> 945
>> 946 putc 'D'
>> 947
>> 948 is_not_040_or_060(1f)
>> 949
>> 950 /*
>> 951 * 040: Map the 16Meg range physical 0x0 up to logical 0x8000.0000
>> 952 */
>> 953 mmu_map #0x80000000,#0,#0x01000000,#_PAGE_NOCACHE_S
>> 954 /*
>> 955 * Map the Zorro III I/O space with transparent translation
>> 956 * for frame buffer memory etc.
>> 957 */
>> 958 mmu_map_tt #1,#0x40000000,#0x20000000,#_PAGE_NOCACHE_S
>> 959
>> 960 jbra L(mmu_init_done)
>> 961
>> 962 1:
>> 963 /*
>> 964 * 030: Map the 32Meg range physical 0x0 up to logical 0x8000.0000
>> 965 */
>> 966 mmu_map #0x80000000,#0,#0x02000000,#_PAGE_NOCACHE030
>> 967 mmu_map_tt #1,#0x40000000,#0x20000000,#_PAGE_NOCACHE030
>> 968
>> 969 jbra L(mmu_init_done)
>> 970
>> 971 L(mmu_init_not_amiga):
>> 972 #endif
>> 973
>> 974 #ifdef CONFIG_ATARI
>> 975
>> 976 L(mmu_init_atari):
>> 977
>> 978 is_not_atari(L(mmu_init_not_atari))
>> 979
>> 980 putc 'E'
>> 981
>> 982 /* On the Atari, we map the I/O region (phys. 0x00ffxxxx) by mapping
>> 983 the last 16 MB of virtual address space to the first 16 MB (i.e.
>> 984 0xffxxxxxx -> 0x00xxxxxx). For this, an additional pointer table is
>> 985 needed. I/O ranges are marked non-cachable.
>> 986
>> 987 For the Medusa it is better to map the I/O region transparently
>> 988 (i.e. 0xffxxxxxx -> 0xffxxxxxx), because some I/O registers are
>> 989 accessible only in the high area.
>> 990
>> 991 On the Hades all I/O registers are only accessible in the high
>> 992 area.
>> 993 */
>> 994
>> 995 /* I/O base addr for non-Medusa, non-Hades: 0x00000000 */
>> 996 moveq #0,%d0
>> 997 movel %pc@(atari_mch_type),%d3
>> 998 cmpl #ATARI_MACH_MEDUSA,%d3
>> 999 jbeq 2f
>> 1000 cmpl #ATARI_MACH_HADES,%d3
>> 1001 jbne 1f
>> 1002 2: movel #0xff000000,%d0 /* Medusa/Hades base addr: 0xff000000 */
>> 1003 1: movel %d0,%d3
>> 1004
>> 1005 is_040_or_060(L(spata68040))
>> 1006
>> 1007 /* Map everything non-cacheable, though not all parts really
>> 1008 * need to disable caches (crucial only for 0xff8000..0xffffff
>> 1009 * (standard I/O) and 0xf00000..0xf3ffff (IDE)). The remainder
>> 1010 * isn't really used, except for sometimes peeking into the
>> 1011 * ROMs (mirror at phys. 0x0), so caching isn't necessary for
>> 1012 * this. */
>> 1013 mmu_map #0xff000000,%d3,#0x01000000,#_PAGE_NOCACHE030
>> 1014
>> 1015 jbra L(mmu_init_done)
>> 1016
>> 1017 L(spata68040):
>> 1018
>> 1019 mmu_map #0xff000000,%d3,#0x01000000,#_PAGE_NOCACHE_S
>> 1020
>> 1021 jbra L(mmu_init_done)
>> 1022
>> 1023 L(mmu_init_not_atari):
>> 1024 #endif
>> 1025
>> 1026 #ifdef CONFIG_Q40
>> 1027 is_not_q40(L(notq40))
>> 1028 /*
>> 1029 * add transparent mapping for 0xff00 0000 - 0xffff ffff
>> 1030 * non-cached serialized etc..
>> 1031 * this includes master chip, DAC, RTC and ISA ports
>> 1032 * 0xfe000000-0xfeffffff is for screen and ROM
>> 1033 */
>> 1034
>> 1035 putc 'Q'
>> 1036
>> 1037 mmu_map_tt #0,#0xfe000000,#0x01000000,#_PAGE_CACHE040W
>> 1038 mmu_map_tt #1,#0xff000000,#0x01000000,#_PAGE_NOCACHE_S
>> 1039
>> 1040 jbra L(mmu_init_done)
>> 1041
>> 1042 L(notq40):
>> 1043 #endif
>> 1044
>> 1045 #ifdef CONFIG_HP300
>> 1046 is_not_hp300(L(nothp300))
>> 1047
>> 1048 /* On the HP300, we map the ROM, INTIO and DIO regions (phys. 0x00xxxxxx)
>> 1049 * by mapping 32MB (on 020/030) or 16 MB (on 040) from 0xf0xxxxxx -> 0x00xxxxxx).
>> 1050 * The ROM mapping is needed because the LEDs are mapped there too.
>> 1051 */
>> 1052
>> 1053 is_040(1f)
>> 1054
>> 1055 /*
>> 1056 * 030: Map the 32Meg range physical 0x0 up to logical 0xf000.0000
>> 1057 */
>> 1058 mmu_map #0xf0000000,#0,#0x02000000,#_PAGE_NOCACHE030
>> 1059
>> 1060 jbra L(mmu_init_done)
>> 1061
>> 1062 1:
>> 1063 /*
>> 1064 * 040: Map the 16Meg range physical 0x0 up to logical 0xf000.0000
>> 1065 */
>> 1066 mmu_map #0xf0000000,#0,#0x01000000,#_PAGE_NOCACHE_S
>> 1067
>> 1068 jbra L(mmu_init_done)
>> 1069
>> 1070 L(nothp300):
>> 1071 #endif /* CONFIG_HP300 */
>> 1072
>> 1073 #ifdef CONFIG_MVME147
>> 1074
>> 1075 is_not_mvme147(L(not147))
>> 1076
>> 1077 /*
>> 1078 * On MVME147 we have already created kernel page tables for
>> 1079 * 4MB of RAM at address 0, so now need to do a transparent
>> 1080 * mapping of the top of memory space. Make it 0.5GByte for now,
>> 1081 * so we can access on-board i/o areas.
>> 1082 */
>> 1083
>> 1084 mmu_map_tt #1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE030
>> 1085
>> 1086 jbra L(mmu_init_done)
>> 1087
>> 1088 L(not147):
>> 1089 #endif /* CONFIG_MVME147 */
>> 1090
>> 1091 #ifdef CONFIG_MVME16x
>> 1092
>> 1093 is_not_mvme16x(L(not16x))
>> 1094
>> 1095 /*
>> 1096 * On MVME16x we have already created kernel page tables for
>> 1097 * 4MB of RAM at address 0, so now need to do a transparent
>> 1098 * mapping of the top of memory space. Make it 0.5GByte for now.
>> 1099 * Supervisor only access, so transparent mapping doesn't
>> 1100 * clash with User code virtual address space.
>> 1101 * this covers IO devices, PROM and SRAM. The PROM and SRAM
>> 1102 * mapping is needed to allow 167Bug to run.
>> 1103 * IO is in the range 0xfff00000 to 0xfffeffff.
>> 1104 * PROM is 0xff800000->0xffbfffff and SRAM is
>> 1105 * 0xffe00000->0xffe1ffff.
>> 1106 */
>> 1107
>> 1108 mmu_map_tt #1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE_S
>> 1109
>> 1110 jbra L(mmu_init_done)
>> 1111
>> 1112 L(not16x):
>> 1113 #endif /* CONFIG_MVME162 | CONFIG_MVME167 */
>> 1114
>> 1115 #ifdef CONFIG_BVME6000
>> 1116
>> 1117 is_not_bvme6000(L(not6000))
>> 1118
>> 1119 /*
>> 1120 * On BVME6000 we have already created kernel page tables for
>> 1121 * 4MB of RAM at address 0, so now need to do a transparent
>> 1122 * mapping of the top of memory space. Make it 0.5GByte for now,
>> 1123 * so we can access on-board i/o areas.
>> 1124 * Supervisor only access, so transparent mapping doesn't
>> 1125 * clash with User code virtual address space.
>> 1126 */
>> 1127
>> 1128 mmu_map_tt #1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE_S
>> 1129
>> 1130 jbra L(mmu_init_done)
>> 1131
>> 1132 L(not6000):
>> 1133 #endif /* CONFIG_BVME6000 */
>> 1134
>> 1135 /*
>> 1136 * mmu_init_mac
>> 1137 *
>> 1138 * The Macintosh mappings are less clear.
>> 1139 *
>> 1140 * Even as of this writing, it is unclear how the
>> 1141 * Macintosh mappings will be done. However, as
>> 1142 * the first author of this code I'm proposing the
>> 1143 * following model:
>> 1144 *
>> 1145 * Map the kernel (that's already done),
>> 1146 * Map the I/O (on most machines that's the
>> 1147 * 0x5000.0000 ... 0x5300.0000 range,
>> 1148 * Map the video frame buffer using as few pages
>> 1149 * as absolutely (this requirement mostly stems from
>> 1150 * the fact that when the frame buffer is at
>> 1151 * 0x0000.0000 then we know there is valid RAM just
>> 1152 * above the screen that we don't want to waste!).
>> 1153 *
>> 1154 * By the way, if the frame buffer is at 0x0000.0000
>> 1155 * then the Macintosh is known as an RBV based Mac.
>> 1156 *
>> 1157 * By the way 2, the code currently maps in a bunch of
>> 1158 * regions. But I'd like to cut that out. (And move most
>> 1159 * of the mappings up into the kernel proper ... or only
>> 1160 * map what's necessary.)
>> 1161 */
>> 1162
>> 1163 #ifdef CONFIG_MAC
>> 1164
>> 1165 L(mmu_init_mac):
>> 1166
>> 1167 is_not_mac(L(mmu_init_not_mac))
>> 1168
>> 1169 putc 'F'
>> 1170
>> 1171 is_not_040_or_060(1f)
>> 1172
>> 1173 moveq #_PAGE_NOCACHE_S,%d3
>> 1174 jbra 2f
>> 1175 1:
>> 1176 moveq #_PAGE_NOCACHE030,%d3
>> 1177 2:
>> 1178 /*
>> 1179 * Mac Note: screen address of logical 0xF000.0000 -> <screen physical>
>> 1180 * we simply map the 4MB that contains the videomem
>> 1181 */
>> 1182
>> 1183 movel #VIDEOMEMMASK,%d0
>> 1184 andl %pc@(L(mac_videobase)),%d0
>> 1185
>> 1186 mmu_map #VIDEOMEMBASE,%d0,#VIDEOMEMSIZE,%d3
>> 1187 /* ROM from 4000 0000 to 4200 0000 (only for mac_reset()) */
>> 1188 mmu_map_eq #0x40000000,#0x02000000,%d3
>> 1189 /* IO devices (incl. serial port) from 5000 0000 to 5300 0000 */
>> 1190 mmu_map_eq #0x50000000,#0x03000000,%d3
>> 1191 /* Nubus slot space (video at 0xF0000000, rom at 0xF0F80000) */
>> 1192 mmu_map_tt #1,#0xf8000000,#0x08000000,%d3
>> 1193
>> 1194 jbra L(mmu_init_done)
>> 1195
>> 1196 L(mmu_init_not_mac):
>> 1197 #endif
>> 1198
>> 1199 #ifdef CONFIG_SUN3X
>> 1200 is_not_sun3x(L(notsun3x))
>> 1201
>> 1202 /* oh, the pain.. We're gonna want the prom code after
>> 1203 * starting the MMU, so we copy the mappings, translating
>> 1204 * from 8k -> 4k pages as we go.
>> 1205 */
>> 1206
>> 1207 /* copy maps from 0xfee00000 to 0xff000000 */
>> 1208 movel #0xfee00000, %d0
>> 1209 moveq #ROOT_INDEX_SHIFT, %d1
>> 1210 lsrl %d1,%d0
>> 1211 mmu_get_root_table_entry %d0
>> 1212
>> 1213 movel #0xfee00000, %d0
>> 1214 moveq #PTR_INDEX_SHIFT, %d1
>> 1215 lsrl %d1,%d0
>> 1216 andl #PTR_TABLE_SIZE-1, %d0
>> 1217 mmu_get_ptr_table_entry %a0,%d0
>> 1218
>> 1219 movel #0xfee00000, %d0
>> 1220 moveq #PAGE_INDEX_SHIFT, %d1
>> 1221 lsrl %d1,%d0
>> 1222 andl #PAGE_TABLE_SIZE-1, %d0
>> 1223 mmu_get_page_table_entry %a0,%d0
>> 1224
>> 1225 /* this is where the prom page table lives */
>> 1226 movel 0xfefe00d4, %a1
>> 1227 movel %a1@, %a1
>> 1228
>> 1229 movel #((0x200000 >> 13)-1), %d1
>> 1230
>> 1231 1:
>> 1232 movel %a1@+, %d3
>> 1233 movel %d3,%a0@+
>> 1234 addl #0x1000,%d3
>> 1235 movel %d3,%a0@+
>> 1236
>> 1237 dbra %d1,1b
>> 1238
>> 1239 /* setup tt1 for I/O */
>> 1240 mmu_map_tt #1,#0x40000000,#0x40000000,#_PAGE_NOCACHE_S
>> 1241 jbra L(mmu_init_done)
>> 1242
>> 1243 L(notsun3x):
>> 1244 #endif
>> 1245
>> 1246 #ifdef CONFIG_VIRT
>> 1247 is_not_virt(L(novirt))
>> 1248 mmu_map_tt #1,#0xFF000000,#0x01000000,#_PAGE_NOCACHE_S
>> 1249 jbra L(mmu_init_done)
>> 1250 L(novirt):
>> 1251 #endif
>> 1252
>> 1253 #ifdef CONFIG_APOLLO
>> 1254 is_not_apollo(L(notapollo))
>> 1255
>> 1256 putc 'P'
>> 1257 mmu_map #0x80000000,#0,#0x02000000,#_PAGE_NOCACHE030
>> 1258
>> 1259 L(notapollo):
>> 1260 jbra L(mmu_init_done)
>> 1261 #endif
>> 1262
>> 1263 L(mmu_init_done):
>> 1264
>> 1265 putc 'G'
>> 1266 leds 0x8
>> 1267
>> 1268 /*
>> 1269 * mmu_fixup
>> 1270 *
>> 1271 * On the 040 class machines, all pages that are used for the
>> 1272 * mmu have to be fixed up. According to Motorola, pages holding mmu
>> 1273 * tables should be non-cacheable on a '040 and write-through on a
>> 1274 * '060. But analysis of the reasons for this, and practical
>> 1275 * experience, showed that write-through also works on a '040.
>> 1276 *
>> 1277 * Allocated memory so far goes from kernel_end to memory_start that
>> 1278 * is used for all kind of tables, for that the cache attributes
>> 1279 * are now fixed.
>> 1280 */
>> 1281 L(mmu_fixup):
>> 1282
>> 1283 is_not_040_or_060(L(mmu_fixup_done))
>> 1284
>> 1285 #ifdef MMU_NOCACHE_KERNEL
>> 1286 jbra L(mmu_fixup_done)
>> 1287 #endif
>> 1288
>> 1289 /* first fix the page at the start of the kernel, that
>> 1290 * contains also kernel_pg_dir.
>> 1291 */
>> 1292 movel %pc@(L(phys_kernel_start)),%d0
>> 1293 subl #PAGE_OFFSET,%d0
>> 1294 lea %pc@(_stext),%a0
>> 1295 subl %d0,%a0
>> 1296 mmu_fixup_page_mmu_cache %a0
>> 1297
>> 1298 movel %pc@(L(kernel_end)),%a0
>> 1299 subl %d0,%a0
>> 1300 movel %pc@(L(memory_start)),%a1
>> 1301 subl %d0,%a1
>> 1302 bra 2f
>> 1303 1:
>> 1304 mmu_fixup_page_mmu_cache %a0
>> 1305 addw #PAGESIZE,%a0
>> 1306 2:
>> 1307 cmpl %a0,%a1
>> 1308 jgt 1b
>> 1309
>> 1310 L(mmu_fixup_done):
>> 1311
>> 1312 #ifdef MMU_PRINT
>> 1313 mmu_print
>> 1314 #endif
>> 1315
>> 1316 /*
>> 1317 * mmu_engage
>> 1318 *
>> 1319 * This chunk of code performs the gruesome task of engaging the MMU.
>> 1320 * The reason it's gruesome is because when the MMU becomes engaged it
>> 1321 * maps logical addresses to physical addresses. The Program Counter
>> 1322 * register is then passed through the MMU before the next instruction
>> 1323 * is fetched (the instruction following the engage MMU instruction).
>> 1324 * This may mean one of two things:
>> 1325 * 1. The Program Counter falls within the logical address space of
>> 1326 * the kernel of which there are two sub-possibilities:
>> 1327 * A. The PC maps to the correct instruction (logical PC == physical
>> 1328 * code location), or
>> 1329 * B. The PC does not map through and the processor will read some
>> 1330 * data (or instruction) which is not the logically next instr.
>> 1331 * As you can imagine, A is good and B is bad.
>> 1332 * Alternatively,
>> 1333 * 2. The Program Counter does not map through the MMU. The processor
>> 1334 * will take a Bus Error.
>> 1335 * Clearly, 2 is bad.
>> 1336 * It doesn't take a wiz kid to figure you want 1.A.
>> 1337 * This code creates that possibility.
>> 1338 * There are two possible 1.A. states (we now ignore the other above states):
>> 1339 * A. The kernel is located at physical memory addressed the same as
>> 1340 * the logical memory for the kernel, i.e., 0x01000.
>> 1341 * B. The kernel is located some where else. e.g., 0x0400.0000
>> 1342 *
>> 1343 * Under some conditions the Macintosh can look like A or B.
>> 1344 * [A friend and I once noted that Apple hardware engineers should be
>> 1345 * wacked twice each day: once when they show up at work (as in, Whack!,
>> 1346 * "This is for the screwy hardware we know you're going to design today."),
>> 1347 * and also at the end of the day (as in, Whack! "I don't know what
>> 1348 * you designed today, but I'm sure it wasn't good."). -- rst]
>> 1349 *
>> 1350 * This code works on the following premise:
>> 1351 * If the kernel start (%d5) is within the first 16 Meg of RAM,
>> 1352 * then create a mapping for the kernel at logical 0x8000.0000 to
>> 1353 * the physical location of the pc. And, create a transparent
>> 1354 * translation register for the first 16 Meg. Then, after the MMU
>> 1355 * is engaged, the PC can be moved up into the 0x8000.0000 range
>> 1356 * and then the transparent translation can be turned off and then
>> 1357 * the PC can jump to the correct logical location and it will be
>> 1358 * home (finally). This is essentially the code that the Amiga used
>> 1359 * to use. Now, it's generalized for all processors. Which means
>> 1360 * that a fresh (but temporary) mapping has to be created. The mapping
>> 1361 * is made in page 0 (an as of yet unused location -- except for the
>> 1362 * stack!). This temporary mapping will only require 1 pointer table
>> 1363 * and a single page table (it can map 256K).
>> 1364 *
>> 1365 * OK, alternatively, imagine that the Program Counter is not within
>> 1366 * the first 16 Meg. Then, just use Transparent Translation registers
>> 1367 * to do the right thing.
>> 1368 *
>> 1369 * Last, if _start is already at 0x01000, then there's nothing special
>> 1370 * to do (in other words, in a degenerate case of the first case above,
>> 1371 * do nothing).
>> 1372 *
>> 1373 * Let's do it.
>> 1374 *
>> 1375 *
>> 1376 */
>> 1377
>> 1378 putc 'H'
>> 1379
>> 1380 mmu_engage
>> 1381
>> 1382 /*
>> 1383 * After this point no new memory is allocated and
>> 1384 * the start of available memory is stored in availmem.
>> 1385 * (The bootmem allocator requires now the physical address.)
>> 1386 */
>> 1387
>> 1388 movel L(memory_start),availmem
>> 1389
>> 1390 #ifdef CONFIG_AMIGA
>> 1391 is_not_amiga(1f)
>> 1392 /* fixup the Amiga custom register location before printing */
>> 1393 clrl L(custom)
>> 1394 1:
>> 1395 #endif
>> 1396
>> 1397 #ifdef CONFIG_ATARI
>> 1398 is_not_atari(1f)
>> 1399 /* fixup the Atari iobase register location before printing */
>> 1400 movel #0xff000000,L(iobase)
>> 1401 1:
>> 1402 #endif
>> 1403
>> 1404 #ifdef CONFIG_MAC
>> 1405 is_not_mac(1f)
>> 1406 movel #~VIDEOMEMMASK,%d0
>> 1407 andl L(mac_videobase),%d0
>> 1408 addl #VIDEOMEMBASE,%d0
>> 1409 movel %d0,L(mac_videobase)
>> 1410 #ifdef CONSOLE_DEBUG
>> 1411 movel %pc@(L(phys_kernel_start)),%d0
>> 1412 subl #PAGE_OFFSET,%d0
>> 1413 subl %d0,L(console_font)
>> 1414 subl %d0,L(console_font_data)
>> 1415 #endif
>> 1416 orl #0x50000000,L(mac_sccbase)
>> 1417 1:
>> 1418 #endif
>> 1419
>> 1420 #ifdef CONFIG_HP300
>> 1421 is_not_hp300(2f)
>> 1422 /*
>> 1423 * Fix up the iobase register to point to the new location of the LEDs.
>> 1424 */
>> 1425 movel #0xf0000000,L(iobase)
>> 1426
>> 1427 /*
>> 1428 * Energise the FPU and caches.
>> 1429 */
>> 1430 is_040(1f)
>> 1431 movel #0x60,0xf05f400c
>> 1432 jbra 2f
>> 1433
>> 1434 /*
>> 1435 * 040: slightly different, apparently.
>> 1436 */
>> 1437 1: movew #0,0xf05f400e
>> 1438 movew #0x64,0xf05f400e
>> 1439 2:
>> 1440 #endif
>> 1441
>> 1442 #ifdef CONFIG_SUN3X
>> 1443 is_not_sun3x(1f)
>> 1444
>> 1445 /* enable copro */
>> 1446 oriw #0x4000,0x61000000
>> 1447 1:
>> 1448 #endif
>> 1449
>> 1450 #ifdef CONFIG_APOLLO
>> 1451 is_not_apollo(1f)
>> 1452
>> 1453 /*
>> 1454 * Fix up the iobase before printing
>> 1455 */
>> 1456 movel #0x80000000,L(iobase)
>> 1457 1:
>> 1458 #endif
>> 1459
>> 1460 putc 'I'
>> 1461 leds 0x10
>> 1462
>> 1463 /*
>> 1464 * Enable caches
>> 1465 */
>> 1466
>> 1467 is_not_040_or_060(L(cache_not_680460))
>> 1468
>> 1469 L(cache680460):
>> 1470 .chip 68040
>> 1471 nop
>> 1472 cpusha %bc
>> 1473 nop
>> 1474
>> 1475 is_060(L(cache68060))
>> 1476
>> 1477 movel #CC6_ENABLE_D+CC6_ENABLE_I,%d0
>> 1478 /* MMU stuff works in copyback mode now, so enable the cache */
>> 1479 movec %d0,%cacr
>> 1480 jra L(cache_done)
>> 1481
>> 1482 L(cache68060):
>> 1483 movel #CC6_ENABLE_D+CC6_ENABLE_I+CC6_ENABLE_SB+CC6_PUSH_DPI+CC6_ENABLE_B+CC6_CLRA_B,%d0
>> 1484 /* MMU stuff works in copyback mode now, so enable the cache */
>> 1485 movec %d0,%cacr
>> 1486 /* enable superscalar dispatch in PCR */
>> 1487 moveq #1,%d0
>> 1488 .chip 68060
>> 1489 movec %d0,%pcr
>> 1490
>> 1491 jbra L(cache_done)
>> 1492 L(cache_not_680460):
>> 1493 L(cache68030):
>> 1494 .chip 68030
>> 1495 movel #CC3_ENABLE_DB+CC3_CLR_D+CC3_ENABLE_D+CC3_ENABLE_IB+CC3_CLR_I+CC3_ENABLE_I,%d0
>> 1496 movec %d0,%cacr
>> 1497
>> 1498 jra L(cache_done)
>> 1499 .chip 68k
>> 1500 L(cache_done):
>> 1501
>> 1502 putc 'J'
>> 1503
>> 1504 /*
>> 1505 * Setup initial stack pointer
>> 1506 */
>> 1507 lea init_task,%curptr
>> 1508 lea init_thread_union+THREAD_SIZE,%sp
>> 1509
>> 1510 putc 'K'
>> 1511
>> 1512 subl %a6,%a6 /* clear a6 for gdb */
>> 1513
>> 1514 /*
>> 1515 * The new 64bit printf support requires an early exception initialization.
>> 1516 */
>> 1517 jbsr base_trap_init
>> 1518
>> 1519 /* jump to the kernel start */
>> 1520
>> 1521 putc '\n'
>> 1522 leds 0x55
>> 1523
>> 1524 jbsr start_kernel
>> 1525
>> 1526 /*
>> 1527 * Find a tag record in the bootinfo structure
>> 1528 * The bootinfo structure is located right after the kernel
>> 1529 * Returns: d0: size (-1 if not found)
>> 1530 * a0: data pointer (end-of-records if not found)
>> 1531 */
>> 1532 func_start get_bi_record,%d1
>> 1533
>> 1534 movel ARG1,%d0
>> 1535 lea %pc@(_end),%a0
>> 1536 1: tstw %a0@(BIR_TAG)
>> 1537 jeq 3f
>> 1538 cmpw %a0@(BIR_TAG),%d0
>> 1539 jeq 2f
>> 1540 addw %a0@(BIR_SIZE),%a0
>> 1541 jra 1b
>> 1542 2: moveq #0,%d0
>> 1543 movew %a0@(BIR_SIZE),%d0
>> 1544 lea %a0@(BIR_DATA),%a0
>> 1545 jra 4f
>> 1546 3: moveq #-1,%d0
>> 1547 lea %a0@(BIR_SIZE),%a0
>> 1548 4:
>> 1549 func_return get_bi_record
>> 1550
>> 1551
>> 1552 /*
>> 1553 * MMU Initialization Begins Here
>> 1554 *
>> 1555 * The structure of the MMU tables on the 68k machines
>> 1556 * is thus:
>> 1557 * Root Table
>> 1558 * Logical addresses are translated through
>> 1559 * a hierarchical translation mechanism where the high-order
>> 1560 * seven bits of the logical address (LA) are used as an
>> 1561 * index into the "root table." Each entry in the root
>> 1562 * table has a bit which specifies if it's a valid pointer to a
>> 1563 * pointer table. Each entry defines a 32Meg range of memory.
>> 1564 * If an entry is invalid then that logical range of 32M is
>> 1565 * invalid and references to that range of memory (when the MMU
>> 1566 * is enabled) will fault. If the entry is valid, then it does
>> 1567 * one of two things. On 040/060 class machines, it points to
>> 1568 * a pointer table which then describes more finely the memory
>> 1569 * within that 32M range. On 020/030 class machines, a technique
>> 1570 * called "early terminating descriptors" are used. This technique
>> 1571 * allows an entire 32Meg to be described by a single entry in the
>> 1572 * root table. Thus, this entry in the root table, contains the
>> 1573 * physical address of the memory or I/O at the logical address
>> 1574 * which the entry represents and it also contains the necessary
>> 1575 * cache bits for this region.
>> 1576 *
>> 1577 * Pointer Tables
>> 1578 * Per the Root Table, there will be one or more
>> 1579 * pointer tables. Each pointer table defines a 32M range.
>> 1580 * Not all of the 32M range need be defined. Again, the next
>> 1581 * seven bits of the logical address are used an index into
>> 1582 * the pointer table to point to page tables (if the pointer
>> 1583 * is valid). There will undoubtedly be more than one
>> 1584 * pointer table for the kernel because each pointer table
>> 1585 * defines a range of only 32M. Valid pointer table entries
>> 1586 * point to page tables, or are early terminating entries
>> 1587 * themselves.
>> 1588 *
>> 1589 * Page Tables
>> 1590 * Per the Pointer Tables, each page table entry points
>> 1591 * to the physical page in memory that supports the logical
>> 1592 * address that translates to the particular index.
>> 1593 *
>> 1594 * In short, the Logical Address gets translated as follows:
>> 1595 * bits 31..26 - index into the Root Table
>> 1596 * bits 25..18 - index into the Pointer Table
>> 1597 * bits 17..12 - index into the Page Table
>> 1598 * bits 11..0 - offset into a particular 4K page
>> 1599 *
>> 1600 * The algorithms which follow do one thing: they abstract
>> 1601 * the MMU hardware. For example, there are three kinds of
>> 1602 * cache settings that are relevant. Either, memory is
>> 1603 * being mapped in which case it is either Kernel Code (or
>> 1604 * the RamDisk) or it is MMU data. On the 030, the MMU data
>> 1605 * option also describes the kernel. Or, I/O is being mapped
>> 1606 * in which case it has its own kind of cache bits. There
>> 1607 * are constants which abstract these notions from the code that
>> 1608 * actually makes the call to map some range of memory.
>> 1609 *
>> 1610 *
>> 1611 *
>> 1612 */
>> 1613
>> 1614 #ifdef MMU_PRINT
>> 1615 /*
>> 1616 * mmu_print
>> 1617 *
>> 1618 * This algorithm will print out the current MMU mappings.
>> 1619 *
>> 1620 * Input:
>> 1621 * %a5 points to the root table. Everything else is calculated
>> 1622 * from this.
>> 1623 */
>> 1624
>> 1625 #define mmu_next_valid 0
>> 1626 #define mmu_start_logical 4
>> 1627 #define mmu_next_logical 8
>> 1628 #define mmu_start_physical 12
>> 1629 #define mmu_next_physical 16
>> 1630
>> 1631 #define MMU_PRINT_INVALID -1
>> 1632 #define MMU_PRINT_VALID 1
>> 1633 #define MMU_PRINT_UNINITED 0
>> 1634
>> 1635 #define putZc(z,n) jbne 1f; putc z; jbra 2f; 1: putc n; 2:
>> 1636
>> 1637 func_start mmu_print,%a0-%a6/%d0-%d7
>> 1638
>> 1639 movel %pc@(L(kernel_pgdir_ptr)),%a5
>> 1640 lea %pc@(L(mmu_print_data)),%a0
>> 1641 movel #MMU_PRINT_UNINITED,%a0@(mmu_next_valid)
>> 1642
>> 1643 is_not_040_or_060(mmu_030_print)
>> 1644
>> 1645 mmu_040_print:
>> 1646 puts "\nMMU040\n"
>> 1647 puts "rp:"
>> 1648 putn %a5
>> 1649 putc '\n'
>> 1650 #if 0
>> 1651 /*
>> 1652 * The following #if/#endif block is a tight algorithm for dumping the 040
>> 1653 * MMU Map in gory detail. It really isn't that practical unless the
>> 1654 * MMU Map algorithm appears to go awry and you need to debug it at the
>> 1655 * entry per entry level.
>> 1656 */
>> 1657 movel #ROOT_TABLE_SIZE,%d5
>> 1658 #if 0
>> 1659 movel %a5@+,%d7 | Burn an entry to skip the kernel mappings,
>> 1660 subql #1,%d5 | they (might) work
>> 1661 #endif
>> 1662 1: tstl %d5
>> 1663 jbeq mmu_print_done
>> 1664 subq #1,%d5
>> 1665 movel %a5@+,%d7
>> 1666 btst #1,%d7
>> 1667 jbeq 1b
>> 1668
>> 1669 2: putn %d7
>> 1670 andil #0xFFFFFE00,%d7
>> 1671 movel %d7,%a4
>> 1672 movel #PTR_TABLE_SIZE,%d4
>> 1673 putc ' '
>> 1674 3: tstl %d4
>> 1675 jbeq 11f
>> 1676 subq #1,%d4
>> 1677 movel %a4@+,%d7
>> 1678 btst #1,%d7
>> 1679 jbeq 3b
>> 1680
>> 1681 4: putn %d7
>> 1682 andil #0xFFFFFF00,%d7
>> 1683 movel %d7,%a3
>> 1684 movel #PAGE_TABLE_SIZE,%d3
>> 1685 5: movel #8,%d2
>> 1686 6: tstl %d3
>> 1687 jbeq 31f
>> 1688 subq #1,%d3
>> 1689 movel %a3@+,%d6
>> 1690 btst #0,%d6
>> 1691 jbeq 6b
>> 1692 7: tstl %d2
>> 1693 jbeq 8f
>> 1694 subq #1,%d2
>> 1695 putc ' '
>> 1696 jbra 91f
>> 1697 8: putc '\n'
>> 1698 movel #8+1+8+1+1,%d2
>> 1699 9: putc ' '
>> 1700 dbra %d2,9b
>> 1701 movel #7,%d2
>> 1702 91: putn %d6
>> 1703 jbra 6b
>> 1704
>> 1705 31: putc '\n'
>> 1706 movel #8+1,%d2
>> 1707 32: putc ' '
>> 1708 dbra %d2,32b
>> 1709 jbra 3b
>> 1710
>> 1711 11: putc '\n'
>> 1712 jbra 1b
>> 1713 #endif /* MMU 040 Dumping code that's gory and detailed */
>> 1714
>> 1715 lea %pc@(kernel_pg_dir),%a5
>> 1716 movel %a5,%a0 /* a0 has the address of the root table ptr */
>> 1717 movel #0x00000000,%a4 /* logical address */
>> 1718 moveql #0,%d0
>> 1719 40:
>> 1720 /* Increment the logical address and preserve in d5 */
>> 1721 movel %a4,%d5
>> 1722 addil #PAGESIZE<<13,%d5
>> 1723 movel %a0@+,%d6
>> 1724 btst #1,%d6
>> 1725 jbne 41f
>> 1726 jbsr mmu_print_tuple_invalidate
>> 1727 jbra 48f
>> 1728 41:
>> 1729 movel #0,%d1
>> 1730 andil #0xfffffe00,%d6
>> 1731 movel %d6,%a1
>> 1732 42:
>> 1733 movel %a4,%d5
>> 1734 addil #PAGESIZE<<6,%d5
>> 1735 movel %a1@+,%d6
>> 1736 btst #1,%d6
>> 1737 jbne 43f
>> 1738 jbsr mmu_print_tuple_invalidate
>> 1739 jbra 47f
>> 1740 43:
>> 1741 movel #0,%d2
>> 1742 andil #0xffffff00,%d6
>> 1743 movel %d6,%a2
>> 1744 44:
>> 1745 movel %a4,%d5
>> 1746 addil #PAGESIZE,%d5
>> 1747 movel %a2@+,%d6
>> 1748 btst #0,%d6
>> 1749 jbne 45f
>> 1750 jbsr mmu_print_tuple_invalidate
>> 1751 jbra 46f
>> 1752 45:
>> 1753 moveml %d0-%d1,%sp@-
>> 1754 movel %a4,%d0
>> 1755 movel %d6,%d1
>> 1756 andil #0xfffff4e0,%d1
>> 1757 lea %pc@(mmu_040_print_flags),%a6
>> 1758 jbsr mmu_print_tuple
>> 1759 moveml %sp@+,%d0-%d1
>> 1760 46:
>> 1761 movel %d5,%a4
>> 1762 addq #1,%d2
>> 1763 cmpib #64,%d2
>> 1764 jbne 44b
>> 1765 47:
>> 1766 movel %d5,%a4
>> 1767 addq #1,%d1
>> 1768 cmpib #128,%d1
>> 1769 jbne 42b
>> 1770 48:
>> 1771 movel %d5,%a4 /* move to the next logical address */
>> 1772 addq #1,%d0
>> 1773 cmpib #128,%d0
>> 1774 jbne 40b
>> 1775
>> 1776 .chip 68040
>> 1777 movec %dtt1,%d0
>> 1778 movel %d0,%d1
>> 1779 andiw #0x8000,%d1 /* is it valid ? */
>> 1780 jbeq 1f /* No, bail out */
>> 1781
>> 1782 movel %d0,%d1
>> 1783 andil #0xff000000,%d1 /* Get the address */
>> 1784 putn %d1
>> 1785 puts "=="
>> 1786 putn %d1
>> 1787
>> 1788 movel %d0,%d6
>> 1789 jbsr mmu_040_print_flags_tt
>> 1790 1:
>> 1791 movec %dtt0,%d0
>> 1792 movel %d0,%d1
>> 1793 andiw #0x8000,%d1 /* is it valid ? */
>> 1794 jbeq 1f /* No, bail out */
>> 1795
>> 1796 movel %d0,%d1
>> 1797 andil #0xff000000,%d1 /* Get the address */
>> 1798 putn %d1
>> 1799 puts "=="
>> 1800 putn %d1
>> 1801
>> 1802 movel %d0,%d6
>> 1803 jbsr mmu_040_print_flags_tt
>> 1804 1:
>> 1805 .chip 68k
>> 1806
>> 1807 jbra mmu_print_done
>> 1808
>> 1809 mmu_040_print_flags:
>> 1810 btstl #10,%d6
>> 1811 putZc(' ','G') /* global bit */
>> 1812 btstl #7,%d6
>> 1813 putZc(' ','S') /* supervisor bit */
>> 1814 mmu_040_print_flags_tt:
>> 1815 btstl #6,%d6
>> 1816 jbne 3f
>> 1817 putc 'C'
>> 1818 btstl #5,%d6
>> 1819 putZc('w','c') /* write through or copy-back */
>> 1820 jbra 4f
>> 1821 3:
>> 1822 putc 'N'
>> 1823 btstl #5,%d6
>> 1824 putZc('s',' ') /* serialized non-cacheable, or non-cacheable */
>> 1825 4:
>> 1826 rts
>> 1827
>> 1828 mmu_030_print_flags:
>> 1829 btstl #6,%d6
>> 1830 putZc('C','I') /* write through or copy-back */
>> 1831 rts
>> 1832
>> 1833 mmu_030_print:
>> 1834 puts "\nMMU030\n"
>> 1835 puts "\nrp:"
>> 1836 putn %a5
>> 1837 putc '\n'
>> 1838 movel %a5,%d0
>> 1839 andil #0xfffffff0,%d0
>> 1840 movel %d0,%a0
>> 1841 movel #0x00000000,%a4 /* logical address */
>> 1842 movel #0,%d0
>> 1843 30:
>> 1844 movel %a4,%d5
>> 1845 addil #PAGESIZE<<13,%d5
>> 1846 movel %a0@+,%d6
>> 1847 btst #1,%d6 /* is it a table ptr? */
>> 1848 jbne 31f /* yes */
>> 1849 btst #0,%d6 /* is it early terminating? */
>> 1850 jbeq 1f /* no */
>> 1851 jbsr mmu_030_print_helper
>> 1852 jbra 38f
>> 1853 1:
>> 1854 jbsr mmu_print_tuple_invalidate
>> 1855 jbra 38f
>> 1856 31:
>> 1857 movel #0,%d1
>> 1858 andil #0xfffffff0,%d6
>> 1859 movel %d6,%a1
>> 1860 32:
>> 1861 movel %a4,%d5
>> 1862 addil #PAGESIZE<<6,%d5
>> 1863 movel %a1@+,%d6
>> 1864 btst #1,%d6 /* is it a table ptr? */
>> 1865 jbne 33f /* yes */
>> 1866 btst #0,%d6 /* is it a page descriptor? */
>> 1867 jbeq 1f /* no */
>> 1868 jbsr mmu_030_print_helper
>> 1869 jbra 37f
>> 1870 1:
>> 1871 jbsr mmu_print_tuple_invalidate
>> 1872 jbra 37f
>> 1873 33:
>> 1874 movel #0,%d2
>> 1875 andil #0xfffffff0,%d6
>> 1876 movel %d6,%a2
>> 1877 34:
>> 1878 movel %a4,%d5
>> 1879 addil #PAGESIZE,%d5
>> 1880 movel %a2@+,%d6
>> 1881 btst #0,%d6
>> 1882 jbne 35f
>> 1883 jbsr mmu_print_tuple_invalidate
>> 1884 jbra 36f
>> 1885 35:
>> 1886 jbsr mmu_030_print_helper
>> 1887 36:
>> 1888 movel %d5,%a4
>> 1889 addq #1,%d2
>> 1890 cmpib #64,%d2
>> 1891 jbne 34b
>> 1892 37:
>> 1893 movel %d5,%a4
>> 1894 addq #1,%d1
>> 1895 cmpib #128,%d1
>> 1896 jbne 32b
>> 1897 38:
>> 1898 movel %d5,%a4 /* move to the next logical address */
>> 1899 addq #1,%d0
>> 1900 cmpib #128,%d0
>> 1901 jbne 30b
>> 1902
>> 1903 mmu_print_done:
>> 1904 puts "\n"
>> 1905
>> 1906 func_return mmu_print
>> 1907
>> 1908
>> 1909 mmu_030_print_helper:
>> 1910 moveml %d0-%d1,%sp@-
>> 1911 movel %a4,%d0
>> 1912 movel %d6,%d1
>> 1913 lea %pc@(mmu_030_print_flags),%a6
>> 1914 jbsr mmu_print_tuple
>> 1915 moveml %sp@+,%d0-%d1
>> 1916 rts
>> 1917
>> 1918 mmu_print_tuple_invalidate:
>> 1919 moveml %a0/%d7,%sp@-
>> 1920
>> 1921 lea %pc@(L(mmu_print_data)),%a0
>> 1922 tstl %a0@(mmu_next_valid)
>> 1923 jbmi mmu_print_tuple_invalidate_exit
>> 1924
>> 1925 movel #MMU_PRINT_INVALID,%a0@(mmu_next_valid)
>> 1926
>> 1927 putn %a4
>> 1928
>> 1929 puts "##\n"
>> 1930
>> 1931 mmu_print_tuple_invalidate_exit:
>> 1932 moveml %sp@+,%a0/%d7
>> 1933 rts
>> 1934
>> 1935
>> 1936 mmu_print_tuple:
>> 1937 moveml %d0-%d7/%a0,%sp@-
>> 1938
>> 1939 lea %pc@(L(mmu_print_data)),%a0
>> 1940
>> 1941 tstl %a0@(mmu_next_valid)
>> 1942 jble mmu_print_tuple_print
>> 1943
>> 1944 cmpl %a0@(mmu_next_physical),%d1
>> 1945 jbeq mmu_print_tuple_increment
11 1946
12 /* set stack point */ !! 1947 mmu_print_tuple_print:
13 lrw r6, init_thread_union + THREAD !! 1948 putn %d0
14 mov sp, r6 !! 1949 puts "->"
15 !! 1950 putn %d1
16 jmpi csky_start <<
17 END(_start) <<
18 <<
19 #ifdef CONFIG_SMP <<
20 .align 10 <<
21 ENTRY(_start_smp_secondary) <<
22 SETUP_MMU <<
23 <<
24 #ifdef CONFIG_PAGE_OFFSET_80000000 <<
25 lrw r6, secondary_msa1 <<
26 ld.w r6, (r6, 0) <<
27 mtcr r6, cr<31, 15> <<
28 #endif <<
29 <<
30 lrw r6, secondary_pgd <<
31 ld.w r6, (r6, 0) <<
32 mtcr r6, cr<28, 15> <<
33 mtcr r6, cr<29, 15> <<
34 <<
35 /* set stack point */ <<
36 lrw r6, secondary_stack <<
37 ld.w r6, (r6, 0) <<
38 mov sp, r6 <<
39 1951
40 jmpi csky_start_secondary !! 1952 movel %d1,%d6
41 END(_start_smp_secondary) !! 1953 jbsr %a6@
>> 1954
>> 1955 mmu_print_tuple_record:
>> 1956 movel #MMU_PRINT_VALID,%a0@(mmu_next_valid)
>> 1957
>> 1958 movel %d1,%a0@(mmu_next_physical)
>> 1959
>> 1960 mmu_print_tuple_increment:
>> 1961 movel %d5,%d7
>> 1962 subl %a4,%d7
>> 1963 addl %d7,%a0@(mmu_next_physical)
>> 1964
>> 1965 mmu_print_tuple_exit:
>> 1966 moveml %sp@+,%d0-%d7/%a0
>> 1967 rts
>> 1968
>> 1969 mmu_print_machine_cpu_types:
>> 1970 puts "machine: "
>> 1971
>> 1972 is_not_amiga(1f)
>> 1973 puts "amiga"
>> 1974 jbra 9f
>> 1975 1:
>> 1976 is_not_atari(2f)
>> 1977 puts "atari"
>> 1978 jbra 9f
>> 1979 2:
>> 1980 is_not_mac(3f)
>> 1981 puts "macintosh"
>> 1982 jbra 9f
>> 1983 3: puts "unknown"
>> 1984 9: putc '\n'
>> 1985
>> 1986 puts "cputype: 0"
>> 1987 is_not_060(1f)
>> 1988 putc '6'
>> 1989 jbra 9f
>> 1990 1:
>> 1991 is_not_040_or_060(2f)
>> 1992 putc '4'
>> 1993 jbra 9f
>> 1994 2: putc '3'
>> 1995 9: putc '0'
>> 1996 putc '\n'
>> 1997
>> 1998 rts
>> 1999 #endif /* MMU_PRINT */
>> 2000
>> 2001 /*
>> 2002 * mmu_map_tt
>> 2003 *
>> 2004 * This is a specific function which works on all 680x0 machines.
>> 2005 * On 030, 040 & 060 it will attempt to use Transparent Translation
>> 2006 * registers (tt1).
>> 2007 * On 020 it will call the standard mmu_map which will use early
>> 2008 * terminating descriptors.
>> 2009 */
>> 2010 func_start mmu_map_tt,%d0/%d1/%a0,4
>> 2011
>> 2012 dputs "mmu_map_tt:"
>> 2013 dputn ARG1
>> 2014 dputn ARG2
>> 2015 dputn ARG3
>> 2016 dputn ARG4
>> 2017 dputc '\n'
>> 2018
>> 2019 is_020(L(do_map))
>> 2020
>> 2021 /* Extract the highest bit set
>> 2022 */
>> 2023 bfffo ARG3{#0,#32},%d1
>> 2024 cmpw #8,%d1
>> 2025 jcc L(do_map)
>> 2026
>> 2027 /* And get the mask
>> 2028 */
>> 2029 moveq #-1,%d0
>> 2030 lsrl %d1,%d0
>> 2031 lsrl #1,%d0
>> 2032
>> 2033 /* Mask the address
>> 2034 */
>> 2035 movel %d0,%d1
>> 2036 notl %d1
>> 2037 andl ARG2,%d1
>> 2038
>> 2039 /* Generate the upper 16bit of the tt register
>> 2040 */
>> 2041 lsrl #8,%d0
>> 2042 orl %d0,%d1
>> 2043 clrw %d1
>> 2044
>> 2045 is_040_or_060(L(mmu_map_tt_040))
>> 2046
>> 2047 /* set 030 specific bits (read/write access for supervisor mode
>> 2048 * (highest function code set, lower two bits masked))
>> 2049 */
>> 2050 orw #TTR_ENABLE+TTR_RWM+TTR_FCB2+TTR_FCM1+TTR_FCM0,%d1
>> 2051 movel ARG4,%d0
>> 2052 btst #6,%d0
>> 2053 jeq 1f
>> 2054 orw #TTR_CI,%d1
>> 2055
>> 2056 1: lea STACK,%a0
>> 2057 dputn %d1
>> 2058 movel %d1,%a0@
>> 2059 .chip 68030
>> 2060 tstl ARG1
>> 2061 jne 1f
>> 2062 pmove %a0@,%tt0
>> 2063 jra 2f
>> 2064 1: pmove %a0@,%tt1
>> 2065 2: .chip 68k
>> 2066 jra L(mmu_map_tt_done)
>> 2067
>> 2068 /* set 040 specific bits
>> 2069 */
>> 2070 L(mmu_map_tt_040):
>> 2071 orw #TTR_ENABLE+TTR_KERNELMODE,%d1
>> 2072 orl ARG4,%d1
>> 2073 dputn %d1
>> 2074
>> 2075 .chip 68040
>> 2076 tstl ARG1
>> 2077 jne 1f
>> 2078 movec %d1,%itt0
>> 2079 movec %d1,%dtt0
>> 2080 jra 2f
>> 2081 1: movec %d1,%itt1
>> 2082 movec %d1,%dtt1
>> 2083 2: .chip 68k
>> 2084
>> 2085 jra L(mmu_map_tt_done)
>> 2086
>> 2087 L(do_map):
>> 2088 mmu_map_eq ARG2,ARG3,ARG4
>> 2089
>> 2090 L(mmu_map_tt_done):
>> 2091
>> 2092 func_return mmu_map_tt
>> 2093
>> 2094 /*
>> 2095 * mmu_map
>> 2096 *
>> 2097 * This routine will map a range of memory using a pointer
>> 2098 * table and allocate the pages on the fly from the kernel.
>> 2099 * The pointer table does not have to be already linked into
>> 2100 * the root table, this routine will do that if necessary.
>> 2101 *
>> 2102 * NOTE
>> 2103 * This routine will assert failure and use the serial_putc
>> 2104 * routines in the case of a run-time error. For example,
>> 2105 * if the address is already mapped.
>> 2106 *
>> 2107 * NOTE-2
>> 2108 * This routine will use early terminating descriptors
>> 2109 * where possible for the 68020+68851 and 68030 type
>> 2110 * processors.
>> 2111 */
>> 2112 func_start mmu_map,%d0-%d4/%a0-%a4
>> 2113
>> 2114 dputs "\nmmu_map:"
>> 2115 dputn ARG1
>> 2116 dputn ARG2
>> 2117 dputn ARG3
>> 2118 dputn ARG4
>> 2119 dputc '\n'
>> 2120
>> 2121 /* Get logical address and round it down to 256KB
>> 2122 */
>> 2123 movel ARG1,%d0
>> 2124 andl #-(PAGESIZE*PAGE_TABLE_SIZE),%d0
>> 2125 movel %d0,%a3
>> 2126
>> 2127 /* Get the end address
>> 2128 */
>> 2129 movel ARG1,%a4
>> 2130 addl ARG3,%a4
>> 2131 subql #1,%a4
>> 2132
>> 2133 /* Get physical address and round it down to 256KB
>> 2134 */
>> 2135 movel ARG2,%d0
>> 2136 andl #-(PAGESIZE*PAGE_TABLE_SIZE),%d0
>> 2137 movel %d0,%a2
>> 2138
>> 2139 /* Add page attributes to the physical address
>> 2140 */
>> 2141 movel ARG4,%d0
>> 2142 orw #_PAGE_PRESENT+_PAGE_ACCESSED+_PAGE_DIRTY,%d0
>> 2143 addw %d0,%a2
>> 2144
>> 2145 dputn %a2
>> 2146 dputn %a3
>> 2147 dputn %a4
>> 2148
>> 2149 is_not_040_or_060(L(mmu_map_030))
>> 2150
>> 2151 addw #_PAGE_GLOBAL040,%a2
>> 2152 /*
>> 2153 * MMU 040 & 060 Support
>> 2154 *
>> 2155 * The MMU usage for the 040 and 060 is different enough from
>> 2156 * the 030 and 68851 that there is separate code. This comment
>> 2157 * block describes the data structures and algorithms built by
>> 2158 * this code.
>> 2159 *
>> 2160 * The 040 does not support early terminating descriptors, as
>> 2161 * the 030 does. Therefore, a third level of table is needed
>> 2162 * for the 040, and that would be the page table. In Linux,
>> 2163 * page tables are allocated directly from the memory above the
>> 2164 * kernel.
>> 2165 *
>> 2166 */
>> 2167
>> 2168 L(mmu_map_040):
>> 2169 /* Calculate the offset into the root table
>> 2170 */
>> 2171 movel %a3,%d0
>> 2172 moveq #ROOT_INDEX_SHIFT,%d1
>> 2173 lsrl %d1,%d0
>> 2174 mmu_get_root_table_entry %d0
>> 2175
>> 2176 /* Calculate the offset into the pointer table
>> 2177 */
>> 2178 movel %a3,%d0
>> 2179 moveq #PTR_INDEX_SHIFT,%d1
>> 2180 lsrl %d1,%d0
>> 2181 andl #PTR_TABLE_SIZE-1,%d0
>> 2182 mmu_get_ptr_table_entry %a0,%d0
>> 2183
>> 2184 /* Calculate the offset into the page table
>> 2185 */
>> 2186 movel %a3,%d0
>> 2187 moveq #PAGE_INDEX_SHIFT,%d1
>> 2188 lsrl %d1,%d0
>> 2189 andl #PAGE_TABLE_SIZE-1,%d0
>> 2190 mmu_get_page_table_entry %a0,%d0
>> 2191
>> 2192 /* The page table entry must not no be busy
>> 2193 */
>> 2194 tstl %a0@
>> 2195 jne L(mmu_map_error)
>> 2196
>> 2197 /* Do the mapping and advance the pointers
>> 2198 */
>> 2199 movel %a2,%a0@
>> 2200 2:
>> 2201 addw #PAGESIZE,%a2
>> 2202 addw #PAGESIZE,%a3
>> 2203
>> 2204 /* Ready with mapping?
>> 2205 */
>> 2206 lea %a3@(-1),%a0
>> 2207 cmpl %a0,%a4
>> 2208 jhi L(mmu_map_040)
>> 2209 jra L(mmu_map_done)
>> 2210
>> 2211 L(mmu_map_030):
>> 2212 /* Calculate the offset into the root table
>> 2213 */
>> 2214 movel %a3,%d0
>> 2215 moveq #ROOT_INDEX_SHIFT,%d1
>> 2216 lsrl %d1,%d0
>> 2217 mmu_get_root_table_entry %d0
>> 2218
>> 2219 /* Check if logical address 32MB aligned,
>> 2220 * so we can try to map it once
>> 2221 */
>> 2222 movel %a3,%d0
>> 2223 andl #(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE-1)&(-ROOT_TABLE_SIZE),%d0
>> 2224 jne 1f
>> 2225
>> 2226 /* Is there enough to map for 32MB at once
>> 2227 */
>> 2228 lea %a3@(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE-1),%a1
>> 2229 cmpl %a1,%a4
>> 2230 jcs 1f
>> 2231
>> 2232 addql #1,%a1
>> 2233
>> 2234 /* The root table entry must not no be busy
>> 2235 */
>> 2236 tstl %a0@
>> 2237 jne L(mmu_map_error)
>> 2238
>> 2239 /* Do the mapping and advance the pointers
>> 2240 */
>> 2241 dputs "early term1"
>> 2242 dputn %a2
>> 2243 dputn %a3
>> 2244 dputn %a1
>> 2245 dputc '\n'
>> 2246 movel %a2,%a0@
>> 2247
>> 2248 movel %a1,%a3
>> 2249 lea %a2@(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE),%a2
>> 2250 jra L(mmu_mapnext_030)
>> 2251 1:
>> 2252 /* Calculate the offset into the pointer table
>> 2253 */
>> 2254 movel %a3,%d0
>> 2255 moveq #PTR_INDEX_SHIFT,%d1
>> 2256 lsrl %d1,%d0
>> 2257 andl #PTR_TABLE_SIZE-1,%d0
>> 2258 mmu_get_ptr_table_entry %a0,%d0
>> 2259
>> 2260 /* The pointer table entry must not no be busy
>> 2261 */
>> 2262 tstl %a0@
>> 2263 jne L(mmu_map_error)
>> 2264
>> 2265 /* Do the mapping and advance the pointers
>> 2266 */
>> 2267 dputs "early term2"
>> 2268 dputn %a2
>> 2269 dputn %a3
>> 2270 dputc '\n'
>> 2271 movel %a2,%a0@
>> 2272
>> 2273 addl #PAGE_TABLE_SIZE*PAGESIZE,%a2
>> 2274 addl #PAGE_TABLE_SIZE*PAGESIZE,%a3
>> 2275
>> 2276 L(mmu_mapnext_030):
>> 2277 /* Ready with mapping?
>> 2278 */
>> 2279 lea %a3@(-1),%a0
>> 2280 cmpl %a0,%a4
>> 2281 jhi L(mmu_map_030)
>> 2282 jra L(mmu_map_done)
>> 2283
>> 2284 L(mmu_map_error):
>> 2285
>> 2286 dputs "mmu_map error:"
>> 2287 dputn %a2
>> 2288 dputn %a3
>> 2289 dputc '\n'
>> 2290
>> 2291 L(mmu_map_done):
>> 2292
>> 2293 func_return mmu_map
>> 2294
>> 2295 /*
>> 2296 * mmu_fixup
>> 2297 *
>> 2298 * On the 040 class machines, all pages that are used for the
>> 2299 * mmu have to be fixed up.
>> 2300 */
>> 2301
>> 2302 func_start mmu_fixup_page_mmu_cache,%d0/%a0
>> 2303
>> 2304 dputs "mmu_fixup_page_mmu_cache"
>> 2305 dputn ARG1
>> 2306
>> 2307 /* Calculate the offset into the root table
>> 2308 */
>> 2309 movel ARG1,%d0
>> 2310 moveq #ROOT_INDEX_SHIFT,%d1
>> 2311 lsrl %d1,%d0
>> 2312 mmu_get_root_table_entry %d0
>> 2313
>> 2314 /* Calculate the offset into the pointer table
>> 2315 */
>> 2316 movel ARG1,%d0
>> 2317 moveq #PTR_INDEX_SHIFT,%d1
>> 2318 lsrl %d1,%d0
>> 2319 andl #PTR_TABLE_SIZE-1,%d0
>> 2320 mmu_get_ptr_table_entry %a0,%d0
>> 2321
>> 2322 /* Calculate the offset into the page table
>> 2323 */
>> 2324 movel ARG1,%d0
>> 2325 moveq #PAGE_INDEX_SHIFT,%d1
>> 2326 lsrl %d1,%d0
>> 2327 andl #PAGE_TABLE_SIZE-1,%d0
>> 2328 mmu_get_page_table_entry %a0,%d0
>> 2329
>> 2330 movel %a0@,%d0
>> 2331 andil #_CACHEMASK040,%d0
>> 2332 orl %pc@(m68k_pgtable_cachemode),%d0
>> 2333 movel %d0,%a0@
>> 2334
>> 2335 dputc '\n'
>> 2336
>> 2337 func_return mmu_fixup_page_mmu_cache
>> 2338
>> 2339 /*
>> 2340 * mmu_temp_map
>> 2341 *
>> 2342 * create a temporary mapping to enable the mmu,
>> 2343 * this we don't need any transparation translation tricks.
>> 2344 */
>> 2345
>> 2346 func_start mmu_temp_map,%d0/%d1/%a0/%a1
>> 2347
>> 2348 dputs "mmu_temp_map"
>> 2349 dputn ARG1
>> 2350 dputn ARG2
>> 2351 dputc '\n'
>> 2352
>> 2353 lea %pc@(L(temp_mmap_mem)),%a1
>> 2354
>> 2355 /* Calculate the offset in the root table
>> 2356 */
>> 2357 movel ARG2,%d0
>> 2358 moveq #ROOT_INDEX_SHIFT,%d1
>> 2359 lsrl %d1,%d0
>> 2360 mmu_get_root_table_entry %d0
>> 2361
>> 2362 /* Check if the table is temporary allocated, so we have to reuse it
>> 2363 */
>> 2364 movel %a0@,%d0
>> 2365 cmpl %pc@(L(memory_start)),%d0
>> 2366 jcc 1f
>> 2367
>> 2368 /* Temporary allocate a ptr table and insert it into the root table
>> 2369 */
>> 2370 movel %a1@,%d0
>> 2371 addl #PTR_TABLE_SIZE*4,%a1@
>> 2372 orw #_PAGE_TABLE+_PAGE_ACCESSED,%d0
>> 2373 movel %d0,%a0@
>> 2374 dputs " (new)"
>> 2375 1:
>> 2376 dputn %d0
>> 2377 /* Mask the root table entry for the ptr table
>> 2378 */
>> 2379 andw #-ROOT_TABLE_SIZE,%d0
>> 2380 movel %d0,%a0
>> 2381
>> 2382 /* Calculate the offset into the pointer table
>> 2383 */
>> 2384 movel ARG2,%d0
>> 2385 moveq #PTR_INDEX_SHIFT,%d1
>> 2386 lsrl %d1,%d0
>> 2387 andl #PTR_TABLE_SIZE-1,%d0
>> 2388 lea %a0@(%d0*4),%a0
>> 2389 dputn %a0
>> 2390
>> 2391 /* Check if a temporary page table is already allocated
>> 2392 */
>> 2393 movel %a0@,%d0
>> 2394 jne 1f
>> 2395
>> 2396 /* Temporary allocate a page table and insert it into the ptr table
>> 2397 */
>> 2398 movel %a1@,%d0
>> 2399 /* The 512 should be PAGE_TABLE_SIZE*4, but that violates the
>> 2400 alignment restriction for pointer tables on the '0[46]0. */
>> 2401 addl #512,%a1@
>> 2402 orw #_PAGE_TABLE+_PAGE_ACCESSED,%d0
>> 2403 movel %d0,%a0@
>> 2404 dputs " (new)"
>> 2405 1:
>> 2406 dputn %d0
>> 2407 /* Mask the ptr table entry for the page table
>> 2408 */
>> 2409 andw #-PTR_TABLE_SIZE,%d0
>> 2410 movel %d0,%a0
>> 2411
>> 2412 /* Calculate the offset into the page table
>> 2413 */
>> 2414 movel ARG2,%d0
>> 2415 moveq #PAGE_INDEX_SHIFT,%d1
>> 2416 lsrl %d1,%d0
>> 2417 andl #PAGE_TABLE_SIZE-1,%d0
>> 2418 lea %a0@(%d0*4),%a0
>> 2419 dputn %a0
>> 2420
>> 2421 /* Insert the address into the page table
>> 2422 */
>> 2423 movel ARG1,%d0
>> 2424 andw #-PAGESIZE,%d0
>> 2425 orw #_PAGE_PRESENT+_PAGE_ACCESSED+_PAGE_DIRTY,%d0
>> 2426 movel %d0,%a0@
>> 2427 dputn %d0
>> 2428
>> 2429 dputc '\n'
>> 2430
>> 2431 func_return mmu_temp_map
>> 2432
>> 2433 func_start mmu_engage,%d0-%d2/%a0-%a3
>> 2434
>> 2435 moveq #ROOT_TABLE_SIZE-1,%d0
>> 2436 /* Temporarily use a different root table. */
>> 2437 lea %pc@(L(kernel_pgdir_ptr)),%a0
>> 2438 movel %a0@,%a2
>> 2439 movel %pc@(L(memory_start)),%a1
>> 2440 movel %a1,%a0@
>> 2441 movel %a2,%a0
>> 2442 1:
>> 2443 movel %a0@+,%a1@+
>> 2444 dbra %d0,1b
>> 2445
>> 2446 lea %pc@(L(temp_mmap_mem)),%a0
>> 2447 movel %a1,%a0@
>> 2448
>> 2449 movew #PAGESIZE-1,%d0
>> 2450 1:
>> 2451 clrl %a1@+
>> 2452 dbra %d0,1b
>> 2453
>> 2454 lea %pc@(1b),%a0
>> 2455 movel #1b,%a1
>> 2456 /* Skip temp mappings if phys == virt */
>> 2457 cmpl %a0,%a1
>> 2458 jeq 1f
>> 2459
>> 2460 mmu_temp_map %a0,%a0
>> 2461 mmu_temp_map %a0,%a1
>> 2462
>> 2463 addw #PAGESIZE,%a0
>> 2464 addw #PAGESIZE,%a1
>> 2465 mmu_temp_map %a0,%a0
>> 2466 mmu_temp_map %a0,%a1
>> 2467 1:
>> 2468 movel %pc@(L(memory_start)),%a3
>> 2469 movel %pc@(L(phys_kernel_start)),%d2
>> 2470
>> 2471 is_not_040_or_060(L(mmu_engage_030))
>> 2472
>> 2473 L(mmu_engage_040):
>> 2474 .chip 68040
>> 2475 nop
>> 2476 cinva %bc
>> 2477 nop
>> 2478 pflusha
>> 2479 nop
>> 2480 movec %a3,%srp
>> 2481 movel #TC_ENABLE+TC_PAGE4K,%d0
>> 2482 movec %d0,%tc /* enable the MMU */
>> 2483 jmp 1f:l
>> 2484 1: nop
>> 2485 movec %a2,%srp
>> 2486 nop
>> 2487 cinva %bc
>> 2488 nop
>> 2489 pflusha
>> 2490 .chip 68k
>> 2491 jra L(mmu_engage_cleanup)
>> 2492
>> 2493 L(mmu_engage_030_temp):
>> 2494 .space 12
>> 2495 L(mmu_engage_030):
>> 2496 .chip 68030
>> 2497 lea %pc@(L(mmu_engage_030_temp)),%a0
>> 2498 movel #0x80000002,%a0@
>> 2499 movel %a3,%a0@(4)
>> 2500 movel #0x0808,%d0
>> 2501 movec %d0,%cacr
>> 2502 pmove %a0@,%srp
>> 2503 pflusha
>> 2504 /*
>> 2505 * enable,super root enable,4096 byte pages,7 bit root index,
>> 2506 * 7 bit pointer index, 6 bit page table index.
>> 2507 */
>> 2508 movel #0x82c07760,%a0@(8)
>> 2509 pmove %a0@(8),%tc /* enable the MMU */
>> 2510 jmp 1f:l
>> 2511 1: movel %a2,%a0@(4)
>> 2512 movel #0x0808,%d0
>> 2513 movec %d0,%cacr
>> 2514 pmove %a0@,%srp
>> 2515 pflusha
>> 2516 .chip 68k
>> 2517
>> 2518 L(mmu_engage_cleanup):
>> 2519 subl #PAGE_OFFSET,%d2
>> 2520 subl %d2,%a2
>> 2521 movel %a2,L(kernel_pgdir_ptr)
>> 2522 subl %d2,%fp
>> 2523 subl %d2,%sp
>> 2524 subl %d2,ARG0
>> 2525
>> 2526 func_return mmu_engage
>> 2527
>> 2528 func_start mmu_get_root_table_entry,%d0/%a1
>> 2529
>> 2530 #if 0
>> 2531 dputs "mmu_get_root_table_entry:"
>> 2532 dputn ARG1
>> 2533 dputs " ="
42 #endif 2534 #endif
>> 2535
>> 2536 movel %pc@(L(kernel_pgdir_ptr)),%a0
>> 2537 tstl %a0
>> 2538 jne 2f
>> 2539
>> 2540 dputs "\nmmu_init:"
>> 2541
>> 2542 /* Find the start of free memory, get_bi_record does this for us,
>> 2543 * as the bootinfo structure is located directly behind the kernel
>> 2544 * we simply search for the last entry.
>> 2545 */
>> 2546 get_bi_record BI_LAST
>> 2547 addw #PAGESIZE-1,%a0
>> 2548 movel %a0,%d0
>> 2549 andw #-PAGESIZE,%d0
>> 2550
>> 2551 dputn %d0
>> 2552
>> 2553 lea %pc@(L(memory_start)),%a0
>> 2554 movel %d0,%a0@
>> 2555 lea %pc@(L(kernel_end)),%a0
>> 2556 movel %d0,%a0@
>> 2557
>> 2558 /* we have to return the first page at _stext since the init code
>> 2559 * in mm/init.c simply expects kernel_pg_dir there, the rest of
>> 2560 * page is used for further ptr tables in get_ptr_table.
>> 2561 */
>> 2562 lea %pc@(_stext),%a0
>> 2563 lea %pc@(L(mmu_cached_pointer_tables)),%a1
>> 2564 movel %a0,%a1@
>> 2565 addl #ROOT_TABLE_SIZE*4,%a1@
>> 2566
>> 2567 lea %pc@(L(mmu_num_pointer_tables)),%a1
>> 2568 addql #1,%a1@
>> 2569
>> 2570 /* clear the page
>> 2571 */
>> 2572 movel %a0,%a1
>> 2573 movew #PAGESIZE/4-1,%d0
>> 2574 1:
>> 2575 clrl %a1@+
>> 2576 dbra %d0,1b
>> 2577
>> 2578 lea %pc@(L(kernel_pgdir_ptr)),%a1
>> 2579 movel %a0,%a1@
>> 2580
>> 2581 dputn %a0
>> 2582 dputc '\n'
>> 2583 2:
>> 2584 movel ARG1,%d0
>> 2585 lea %a0@(%d0*4),%a0
>> 2586
>> 2587 #if 0
>> 2588 dputn %a0
>> 2589 dputc '\n'
>> 2590 #endif
>> 2591
>> 2592 func_return mmu_get_root_table_entry
>> 2593
>> 2594
>> 2595
>> 2596 func_start mmu_get_ptr_table_entry,%d0/%a1
>> 2597
>> 2598 #if 0
>> 2599 dputs "mmu_get_ptr_table_entry:"
>> 2600 dputn ARG1
>> 2601 dputn ARG2
>> 2602 dputs " ="
>> 2603 #endif
>> 2604
>> 2605 movel ARG1,%a0
>> 2606 movel %a0@,%d0
>> 2607 jne 2f
>> 2608
>> 2609 /* Keep track of the number of pointer tables we use
>> 2610 */
>> 2611 dputs "\nmmu_get_new_ptr_table:"
>> 2612 lea %pc@(L(mmu_num_pointer_tables)),%a0
>> 2613 movel %a0@,%d0
>> 2614 addql #1,%a0@
>> 2615
>> 2616 /* See if there is a free pointer table in our cache of pointer tables
>> 2617 */
>> 2618 lea %pc@(L(mmu_cached_pointer_tables)),%a1
>> 2619 andw #7,%d0
>> 2620 jne 1f
>> 2621
>> 2622 /* Get a new pointer table page from above the kernel memory
>> 2623 */
>> 2624 get_new_page
>> 2625 movel %a0,%a1@
>> 2626 1:
>> 2627 /* There is an unused pointer table in our cache... use it
>> 2628 */
>> 2629 movel %a1@,%d0
>> 2630 addl #PTR_TABLE_SIZE*4,%a1@
>> 2631
>> 2632 dputn %d0
>> 2633 dputc '\n'
>> 2634
>> 2635 /* Insert the new pointer table into the root table
>> 2636 */
>> 2637 movel ARG1,%a0
>> 2638 orw #_PAGE_TABLE+_PAGE_ACCESSED,%d0
>> 2639 movel %d0,%a0@
>> 2640 2:
>> 2641 /* Extract the pointer table entry
>> 2642 */
>> 2643 andw #-PTR_TABLE_SIZE,%d0
>> 2644 movel %d0,%a0
>> 2645 movel ARG2,%d0
>> 2646 lea %a0@(%d0*4),%a0
>> 2647
>> 2648 #if 0
>> 2649 dputn %a0
>> 2650 dputc '\n'
>> 2651 #endif
>> 2652
>> 2653 func_return mmu_get_ptr_table_entry
>> 2654
>> 2655
>> 2656 func_start mmu_get_page_table_entry,%d0/%a1
>> 2657
>> 2658 #if 0
>> 2659 dputs "mmu_get_page_table_entry:"
>> 2660 dputn ARG1
>> 2661 dputn ARG2
>> 2662 dputs " ="
>> 2663 #endif
>> 2664
>> 2665 movel ARG1,%a0
>> 2666 movel %a0@,%d0
>> 2667 jne 2f
>> 2668
>> 2669 /* If the page table entry doesn't exist, we allocate a complete new
>> 2670 * page and use it as one continuous big page table which can cover
>> 2671 * 4MB of memory, nearly almost all mappings have that alignment.
>> 2672 */
>> 2673 get_new_page
>> 2674 addw #_PAGE_TABLE+_PAGE_ACCESSED,%a0
>> 2675
>> 2676 /* align pointer table entry for a page of page tables
>> 2677 */
>> 2678 movel ARG1,%d0
>> 2679 andw #-(PAGESIZE/PAGE_TABLE_SIZE),%d0
>> 2680 movel %d0,%a1
>> 2681
>> 2682 /* Insert the page tables into the pointer entries
>> 2683 */
>> 2684 moveq #PAGESIZE/PAGE_TABLE_SIZE/4-1,%d0
>> 2685 1:
>> 2686 movel %a0,%a1@+
>> 2687 lea %a0@(PAGE_TABLE_SIZE*4),%a0
>> 2688 dbra %d0,1b
>> 2689
>> 2690 /* Now we can get the initialized pointer table entry
>> 2691 */
>> 2692 movel ARG1,%a0
>> 2693 movel %a0@,%d0
>> 2694 2:
>> 2695 /* Extract the page table entry
>> 2696 */
>> 2697 andw #-PAGE_TABLE_SIZE,%d0
>> 2698 movel %d0,%a0
>> 2699 movel ARG2,%d0
>> 2700 lea %a0@(%d0*4),%a0
>> 2701
>> 2702 #if 0
>> 2703 dputn %a0
>> 2704 dputc '\n'
>> 2705 #endif
>> 2706
>> 2707 func_return mmu_get_page_table_entry
>> 2708
>> 2709 /*
>> 2710 * get_new_page
>> 2711 *
>> 2712 * Return a new page from the memory start and clear it.
>> 2713 */
>> 2714 func_start get_new_page,%d0/%a1
>> 2715
>> 2716 dputs "\nget_new_page:"
>> 2717
>> 2718 /* allocate the page and adjust memory_start
>> 2719 */
>> 2720 lea %pc@(L(memory_start)),%a0
>> 2721 movel %a0@,%a1
>> 2722 addl #PAGESIZE,%a0@
>> 2723
>> 2724 /* clear the new page
>> 2725 */
>> 2726 movel %a1,%a0
>> 2727 movew #PAGESIZE/4-1,%d0
>> 2728 1:
>> 2729 clrl %a1@+
>> 2730 dbra %d0,1b
>> 2731
>> 2732 dputn %a0
>> 2733 dputc '\n'
>> 2734
>> 2735 func_return get_new_page
>> 2736
>> 2737
>> 2738
>> 2739 /*
>> 2740 * Debug output support
>> 2741 * Atarians have a choice between the parallel port, the serial port
>> 2742 * from the MFP or a serial port of the SCC
>> 2743 */
>> 2744
>> 2745 #ifdef CONFIG_MAC
>> 2746 /* You may define either or both of these. */
>> 2747 #define MAC_USE_SCC_A /* Modem port */
>> 2748 #define MAC_USE_SCC_B /* Printer port */
>> 2749
>> 2750 #if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
>> 2751 /* Initialisation table for SCC with 3.6864 MHz PCLK */
>> 2752 L(scc_initable_mac):
>> 2753 .byte 4,0x44 /* x16, 1 stopbit, no parity */
>> 2754 .byte 3,0xc0 /* receiver: 8 bpc */
>> 2755 .byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */
>> 2756 .byte 10,0 /* NRZ */
>> 2757 .byte 11,0x50 /* use baud rate generator */
>> 2758 .byte 12,1,13,0 /* 38400 baud */
>> 2759 .byte 14,1 /* Baud rate generator enable */
>> 2760 .byte 3,0xc1 /* enable receiver */
>> 2761 .byte 5,0xea /* enable transmitter */
>> 2762 .byte -1
>> 2763 .even
>> 2764 #endif
>> 2765 #endif /* CONFIG_MAC */
>> 2766
>> 2767 #ifdef CONFIG_ATARI
>> 2768 /* #define USE_PRINTER */
>> 2769 /* #define USE_SCC_B */
>> 2770 /* #define USE_SCC_A */
>> 2771 #define USE_MFP
>> 2772
>> 2773 #if defined(USE_SCC_A) || defined(USE_SCC_B)
>> 2774 /* Initialisation table for SCC with 7.9872 MHz PCLK */
>> 2775 /* PCLK == 8.0539 gives baud == 9680.1 */
>> 2776 L(scc_initable_atari):
>> 2777 .byte 4,0x44 /* x16, 1 stopbit, no parity */
>> 2778 .byte 3,0xc0 /* receiver: 8 bpc */
>> 2779 .byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */
>> 2780 .byte 10,0 /* NRZ */
>> 2781 .byte 11,0x50 /* use baud rate generator */
>> 2782 .byte 12,24,13,0 /* 9600 baud */
>> 2783 .byte 14,2,14,3 /* use master clock for BRG, enable */
>> 2784 .byte 3,0xc1 /* enable receiver */
>> 2785 .byte 5,0xea /* enable transmitter */
>> 2786 .byte -1
>> 2787 .even
>> 2788 #endif
>> 2789
>> 2790 #ifdef USE_PRINTER
>> 2791
>> 2792 LPSG_SELECT = 0xff8800
>> 2793 LPSG_READ = 0xff8800
>> 2794 LPSG_WRITE = 0xff8802
>> 2795 LPSG_IO_A = 14
>> 2796 LPSG_IO_B = 15
>> 2797 LPSG_CONTROL = 7
>> 2798 LSTMFP_GPIP = 0xfffa01
>> 2799 LSTMFP_DDR = 0xfffa05
>> 2800 LSTMFP_IERB = 0xfffa09
>> 2801
>> 2802 #elif defined(USE_SCC_B)
>> 2803
>> 2804 LSCC_CTRL = 0xff8c85
>> 2805 LSCC_DATA = 0xff8c87
>> 2806
>> 2807 #elif defined(USE_SCC_A)
>> 2808
>> 2809 LSCC_CTRL = 0xff8c81
>> 2810 LSCC_DATA = 0xff8c83
>> 2811
>> 2812 #elif defined(USE_MFP)
>> 2813
>> 2814 LMFP_UCR = 0xfffa29
>> 2815 LMFP_TDCDR = 0xfffa1d
>> 2816 LMFP_TDDR = 0xfffa25
>> 2817 LMFP_TSR = 0xfffa2d
>> 2818 LMFP_UDR = 0xfffa2f
>> 2819
>> 2820 #endif
>> 2821 #endif /* CONFIG_ATARI */
>> 2822
>> 2823 /*
>> 2824 * Serial port output support.
>> 2825 */
>> 2826
>> 2827 /*
>> 2828 * Initialize serial port hardware
>> 2829 */
>> 2830 func_start serial_init,%d0/%d1/%a0/%a1
>> 2831 /*
>> 2832 * Some of the register usage that follows
>> 2833 * CONFIG_AMIGA
>> 2834 * a0 = pointer to boot info record
>> 2835 * d0 = boot info offset
>> 2836 * CONFIG_ATARI
>> 2837 * a0 = address of SCC
>> 2838 * a1 = Liobase address/address of scc_initable_atari
>> 2839 * d0 = init data for serial port
>> 2840 * CONFIG_MAC
>> 2841 * a0 = address of SCC
>> 2842 * a1 = address of scc_initable_mac
>> 2843 * d0 = init data for serial port
>> 2844 */
>> 2845
>> 2846 #ifdef CONFIG_AMIGA
>> 2847 #define SERIAL_DTR 7
>> 2848 #define SERIAL_CNTRL CIABBASE+C_PRA
>> 2849
>> 2850 is_not_amiga(1f)
>> 2851 lea %pc@(L(custom)),%a0
>> 2852 movel #-ZTWOBASE,%a0@
>> 2853 bclr #SERIAL_DTR,SERIAL_CNTRL-ZTWOBASE
>> 2854 get_bi_record BI_AMIGA_SERPER
>> 2855 movew %a0@,CUSTOMBASE+C_SERPER-ZTWOBASE
>> 2856 | movew #61,CUSTOMBASE+C_SERPER-ZTWOBASE
>> 2857 1:
>> 2858 #endif
>> 2859
>> 2860 #ifdef CONFIG_ATARI
>> 2861 is_not_atari(4f)
>> 2862 movel %pc@(L(iobase)),%a1
>> 2863 #if defined(USE_PRINTER)
>> 2864 bclr #0,%a1@(LSTMFP_IERB)
>> 2865 bclr #0,%a1@(LSTMFP_DDR)
>> 2866 moveb #LPSG_CONTROL,%a1@(LPSG_SELECT)
>> 2867 moveb #0xff,%a1@(LPSG_WRITE)
>> 2868 moveb #LPSG_IO_B,%a1@(LPSG_SELECT)
>> 2869 clrb %a1@(LPSG_WRITE)
>> 2870 moveb #LPSG_IO_A,%a1@(LPSG_SELECT)
>> 2871 moveb %a1@(LPSG_READ),%d0
>> 2872 bset #5,%d0
>> 2873 moveb %d0,%a1@(LPSG_WRITE)
>> 2874 #elif defined(USE_SCC_A) || defined(USE_SCC_B)
>> 2875 lea %a1@(LSCC_CTRL),%a0
>> 2876 /* Reset SCC register pointer */
>> 2877 moveb %a0@,%d0
>> 2878 /* Reset SCC device: write register pointer then register value */
>> 2879 moveb #9,%a0@
>> 2880 moveb #0xc0,%a0@
>> 2881 /* Wait for 5 PCLK cycles, which is about 63 CPU cycles */
>> 2882 /* 5 / 7.9872 MHz = approx. 0.63 us = 63 / 100 MHz */
>> 2883 movel #32,%d0
>> 2884 2:
>> 2885 subq #1,%d0
>> 2886 jne 2b
>> 2887 /* Initialize channel */
>> 2888 lea %pc@(L(scc_initable_atari)),%a1
>> 2889 2: moveb %a1@+,%d0
>> 2890 jmi 3f
>> 2891 moveb %d0,%a0@
>> 2892 moveb %a1@+,%a0@
>> 2893 jra 2b
>> 2894 3: clrb %a0@
>> 2895 #elif defined(USE_MFP)
>> 2896 bclr #1,%a1@(LMFP_TSR)
>> 2897 moveb #0x88,%a1@(LMFP_UCR)
>> 2898 andb #0x70,%a1@(LMFP_TDCDR)
>> 2899 moveb #2,%a1@(LMFP_TDDR)
>> 2900 orb #1,%a1@(LMFP_TDCDR)
>> 2901 bset #1,%a1@(LMFP_TSR)
>> 2902 #endif
>> 2903 jra L(serial_init_done)
>> 2904 4:
>> 2905 #endif
>> 2906
>> 2907 #ifdef CONFIG_MAC
>> 2908 is_not_mac(L(serial_init_not_mac))
>> 2909 #if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
>> 2910 #define mac_scc_cha_b_ctrl_offset 0x0
>> 2911 #define mac_scc_cha_a_ctrl_offset 0x2
>> 2912 #define mac_scc_cha_b_data_offset 0x4
>> 2913 #define mac_scc_cha_a_data_offset 0x6
>> 2914 movel %pc@(L(mac_sccbase)),%a0
>> 2915 /* Reset SCC register pointer */
>> 2916 moveb %a0@(mac_scc_cha_a_ctrl_offset),%d0
>> 2917 /* Reset SCC device: write register pointer then register value */
>> 2918 moveb #9,%a0@(mac_scc_cha_a_ctrl_offset)
>> 2919 moveb #0xc0,%a0@(mac_scc_cha_a_ctrl_offset)
>> 2920 /* Wait for 5 PCLK cycles, which is about 68 CPU cycles */
>> 2921 /* 5 / 3.6864 MHz = approx. 1.36 us = 68 / 50 MHz */
>> 2922 movel #35,%d0
>> 2923 5:
>> 2924 subq #1,%d0
>> 2925 jne 5b
>> 2926 #endif
>> 2927 #ifdef MAC_USE_SCC_A
>> 2928 /* Initialize channel A */
>> 2929 lea %pc@(L(scc_initable_mac)),%a1
>> 2930 5: moveb %a1@+,%d0
>> 2931 jmi 6f
>> 2932 moveb %d0,%a0@(mac_scc_cha_a_ctrl_offset)
>> 2933 moveb %a1@+,%a0@(mac_scc_cha_a_ctrl_offset)
>> 2934 jra 5b
>> 2935 6:
>> 2936 #endif /* MAC_USE_SCC_A */
>> 2937 #ifdef MAC_USE_SCC_B
>> 2938 /* Initialize channel B */
>> 2939 lea %pc@(L(scc_initable_mac)),%a1
>> 2940 7: moveb %a1@+,%d0
>> 2941 jmi 8f
>> 2942 moveb %d0,%a0@(mac_scc_cha_b_ctrl_offset)
>> 2943 moveb %a1@+,%a0@(mac_scc_cha_b_ctrl_offset)
>> 2944 jra 7b
>> 2945 8:
>> 2946 #endif /* MAC_USE_SCC_B */
>> 2947 jra L(serial_init_done)
>> 2948 L(serial_init_not_mac):
>> 2949 #endif /* CONFIG_MAC */
>> 2950
>> 2951 #ifdef CONFIG_Q40
>> 2952 is_not_q40(2f)
>> 2953 /* debug output goes into SRAM, so we don't do it unless requested
>> 2954 - check for '%LX$' signature in SRAM */
>> 2955 lea %pc@(q40_mem_cptr),%a1
>> 2956 move.l #0xff020010,%a1@ /* must be inited - also used by debug=mem */
>> 2957 move.l #0xff020000,%a1
>> 2958 cmp.b #'%',%a1@
>> 2959 bne 2f /*nodbg*/
>> 2960 addq.w #4,%a1
>> 2961 cmp.b #'L',%a1@
>> 2962 bne 2f /*nodbg*/
>> 2963 addq.w #4,%a1
>> 2964 cmp.b #'X',%a1@
>> 2965 bne 2f /*nodbg*/
>> 2966 addq.w #4,%a1
>> 2967 cmp.b #'$',%a1@
>> 2968 bne 2f /*nodbg*/
>> 2969 /* signature OK */
>> 2970 lea %pc@(L(q40_do_debug)),%a1
>> 2971 tas %a1@
>> 2972 /*nodbg: q40_do_debug is 0 by default*/
>> 2973 2:
>> 2974 #endif
>> 2975
>> 2976 #ifdef CONFIG_MVME16x
>> 2977 is_not_mvme16x(L(serial_init_not_mvme16x))
>> 2978 moveb #0x10,M167_PCSCCMICR
>> 2979 moveb #0x10,M167_PCSCCTICR
>> 2980 moveb #0x10,M167_PCSCCRICR
>> 2981 jra L(serial_init_done)
>> 2982 L(serial_init_not_mvme16x):
>> 2983 #endif
>> 2984
>> 2985 #ifdef CONFIG_APOLLO
>> 2986 /* We count on the PROM initializing SIO1 */
>> 2987 #endif
>> 2988
>> 2989 #ifdef CONFIG_HP300
>> 2990 /* We count on the boot loader initialising the UART */
>> 2991 #endif
>> 2992
>> 2993 L(serial_init_done):
>> 2994 func_return serial_init
>> 2995
>> 2996 /*
>> 2997 * Output character on serial port.
>> 2998 */
>> 2999 func_start serial_putc,%d0/%d1/%a0/%a1
>> 3000
>> 3001 movel ARG1,%d0
>> 3002 cmpib #'\n',%d0
>> 3003 jbne 1f
>> 3004
>> 3005 /* A little safe recursion is good for the soul */
>> 3006 serial_putc #'\r'
>> 3007 1:
>> 3008
>> 3009 #ifdef CONFIG_AMIGA
>> 3010 is_not_amiga(2f)
>> 3011 andw #0x00ff,%d0
>> 3012 oriw #0x0100,%d0
>> 3013 movel %pc@(L(custom)),%a0
>> 3014 movew %d0,%a0@(CUSTOMBASE+C_SERDAT)
>> 3015 1: movew %a0@(CUSTOMBASE+C_SERDATR),%d0
>> 3016 andw #0x2000,%d0
>> 3017 jeq 1b
>> 3018 jra L(serial_putc_done)
>> 3019 2:
>> 3020 #endif
>> 3021
>> 3022 #ifdef CONFIG_MAC
>> 3023 is_not_mac(5f)
>> 3024 #if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
>> 3025 movel %pc@(L(mac_sccbase)),%a1
>> 3026 #endif
>> 3027 #ifdef MAC_USE_SCC_A
>> 3028 3: btst #2,%a1@(mac_scc_cha_a_ctrl_offset)
>> 3029 jeq 3b
>> 3030 moveb %d0,%a1@(mac_scc_cha_a_data_offset)
>> 3031 #endif /* MAC_USE_SCC_A */
>> 3032 #ifdef MAC_USE_SCC_B
>> 3033 4: btst #2,%a1@(mac_scc_cha_b_ctrl_offset)
>> 3034 jeq 4b
>> 3035 moveb %d0,%a1@(mac_scc_cha_b_data_offset)
>> 3036 #endif /* MAC_USE_SCC_B */
>> 3037 jra L(serial_putc_done)
>> 3038 5:
>> 3039 #endif /* CONFIG_MAC */
>> 3040
>> 3041 #ifdef CONFIG_ATARI
>> 3042 is_not_atari(4f)
>> 3043 movel %pc@(L(iobase)),%a1
>> 3044 #if defined(USE_PRINTER)
>> 3045 3: btst #0,%a1@(LSTMFP_GPIP)
>> 3046 jne 3b
>> 3047 moveb #LPSG_IO_B,%a1@(LPSG_SELECT)
>> 3048 moveb %d0,%a1@(LPSG_WRITE)
>> 3049 moveb #LPSG_IO_A,%a1@(LPSG_SELECT)
>> 3050 moveb %a1@(LPSG_READ),%d0
>> 3051 bclr #5,%d0
>> 3052 moveb %d0,%a1@(LPSG_WRITE)
>> 3053 nop
>> 3054 nop
>> 3055 bset #5,%d0
>> 3056 moveb %d0,%a1@(LPSG_WRITE)
>> 3057 #elif defined(USE_SCC_A) || defined(USE_SCC_B)
>> 3058 3: btst #2,%a1@(LSCC_CTRL)
>> 3059 jeq 3b
>> 3060 moveb %d0,%a1@(LSCC_DATA)
>> 3061 #elif defined(USE_MFP)
>> 3062 3: btst #7,%a1@(LMFP_TSR)
>> 3063 jeq 3b
>> 3064 moveb %d0,%a1@(LMFP_UDR)
>> 3065 #endif
>> 3066 jra L(serial_putc_done)
>> 3067 4:
>> 3068 #endif /* CONFIG_ATARI */
>> 3069
>> 3070 #ifdef CONFIG_MVME147
>> 3071 is_not_mvme147(2f)
>> 3072 1: btst #2,M147_SCC_CTRL_A
>> 3073 jeq 1b
>> 3074 moveb %d0,M147_SCC_DATA_A
>> 3075 jbra L(serial_putc_done)
>> 3076 2:
>> 3077 #endif
>> 3078
>> 3079 #ifdef CONFIG_MVME16x
>> 3080 is_not_mvme16x(2f)
>> 3081 /*
>> 3082 * If the loader gave us a board type then we can use that to
>> 3083 * select an appropriate output routine; otherwise we just use
>> 3084 * the Bug code. If we have to use the Bug that means the Bug
>> 3085 * workspace has to be valid, which means the Bug has to use
>> 3086 * the SRAM, which is non-standard.
>> 3087 */
>> 3088 moveml %d0-%d7/%a2-%a6,%sp@-
>> 3089 movel vme_brdtype,%d1
>> 3090 jeq 1f | No tag - use the Bug
>> 3091 cmpi #VME_TYPE_MVME162,%d1
>> 3092 jeq 6f
>> 3093 cmpi #VME_TYPE_MVME172,%d1
>> 3094 jne 5f
>> 3095 /* 162/172; it's an SCC */
>> 3096 6: btst #2,M162_SCC_CTRL_A
>> 3097 nop
>> 3098 nop
>> 3099 nop
>> 3100 jeq 6b
>> 3101 moveb #8,M162_SCC_CTRL_A
>> 3102 nop
>> 3103 nop
>> 3104 nop
>> 3105 moveb %d0,M162_SCC_CTRL_A
>> 3106 jra 3f
>> 3107 5:
>> 3108 /* 166/167/177; it's a CD2401 */
>> 3109 moveb #0,M167_CYCAR
>> 3110 moveb M167_CYIER,%d2
>> 3111 moveb #0x02,M167_CYIER
>> 3112 7:
>> 3113 btst #5,M167_PCSCCTICR
>> 3114 jeq 7b
>> 3115 moveb M167_PCTPIACKR,%d1
>> 3116 moveb M167_CYLICR,%d1
>> 3117 jeq 8f
>> 3118 moveb #0x08,M167_CYTEOIR
>> 3119 jra 7b
>> 3120 8:
>> 3121 moveb %d0,M167_CYTDR
>> 3122 moveb #0,M167_CYTEOIR
>> 3123 moveb %d2,M167_CYIER
>> 3124 jra 3f
>> 3125 1:
>> 3126 moveb %d0,%sp@-
>> 3127 trap #15
>> 3128 .word 0x0020 /* TRAP 0x020 */
>> 3129 3:
>> 3130 moveml %sp@+,%d0-%d7/%a2-%a6
>> 3131 jbra L(serial_putc_done)
>> 3132 2:
>> 3133 #endif /* CONFIG_MVME16x */
>> 3134
>> 3135 #ifdef CONFIG_BVME6000
>> 3136 is_not_bvme6000(2f)
>> 3137 /*
>> 3138 * The BVME6000 machine has a serial port ...
>> 3139 */
>> 3140 1: btst #2,BVME_SCC_CTRL_A
>> 3141 jeq 1b
>> 3142 moveb %d0,BVME_SCC_DATA_A
>> 3143 jbra L(serial_putc_done)
>> 3144 2:
>> 3145 #endif
>> 3146
>> 3147 #ifdef CONFIG_SUN3X
>> 3148 is_not_sun3x(2f)
>> 3149 movel %d0,-(%sp)
>> 3150 movel 0xFEFE0018,%a1
>> 3151 jbsr (%a1)
>> 3152 addq #4,%sp
>> 3153 jbra L(serial_putc_done)
>> 3154 2:
>> 3155 #endif
>> 3156
>> 3157 #ifdef CONFIG_Q40
>> 3158 is_not_q40(2f)
>> 3159 tst.l %pc@(L(q40_do_debug)) /* only debug if requested */
>> 3160 beq 2f
>> 3161 lea %pc@(q40_mem_cptr),%a1
>> 3162 move.l %a1@,%a0
>> 3163 move.b %d0,%a0@
>> 3164 addq.l #4,%a0
>> 3165 move.l %a0,%a1@
>> 3166 jbra L(serial_putc_done)
>> 3167 2:
>> 3168 #endif
>> 3169
>> 3170 #ifdef CONFIG_APOLLO
>> 3171 is_not_apollo(2f)
>> 3172 movl %pc@(L(iobase)),%a1
>> 3173 moveb %d0,%a1@(LTHRB0)
>> 3174 1: moveb %a1@(LSRB0),%d0
>> 3175 andb #0x4,%d0
>> 3176 beq 1b
>> 3177 jbra L(serial_putc_done)
>> 3178 2:
>> 3179 #endif
>> 3180
>> 3181 #ifdef CONFIG_HP300
>> 3182 is_not_hp300(3f)
>> 3183 movl %pc@(L(iobase)),%a1
>> 3184 addl %pc@(L(uartbase)),%a1
>> 3185 movel %pc@(L(uart_scode)),%d1 /* Check the scode */
>> 3186 jmi 3f /* Unset? Exit */
>> 3187 cmpi #256,%d1 /* APCI scode? */
>> 3188 jeq 2f
>> 3189 1: moveb %a1@(DCALSR),%d1 /* Output to DCA */
>> 3190 andb #0x20,%d1
>> 3191 beq 1b
>> 3192 moveb %d0,%a1@(DCADATA)
>> 3193 jbra L(serial_putc_done)
>> 3194 2: moveb %a1@(APCILSR),%d1 /* Output to APCI */
>> 3195 andb #0x20,%d1
>> 3196 beq 2b
>> 3197 moveb %d0,%a1@(APCIDATA)
>> 3198 jbra L(serial_putc_done)
>> 3199 3:
>> 3200 #endif
>> 3201
>> 3202 #ifdef CONFIG_VIRT
>> 3203 is_not_virt(1f)
>> 3204
>> 3205 movel L(virt_gf_tty_base),%a1
>> 3206 movel %d0,%a1@(GF_PUT_CHAR)
>> 3207 1:
>> 3208 #endif
>> 3209
>> 3210 L(serial_putc_done):
>> 3211 func_return serial_putc
>> 3212
>> 3213 /*
>> 3214 * Output a string.
>> 3215 */
>> 3216 func_start puts,%d0/%a0
>> 3217
>> 3218 movel ARG1,%a0
>> 3219 jra 2f
>> 3220 1:
>> 3221 #ifdef CONSOLE_DEBUG
>> 3222 console_putc %d0
>> 3223 #endif
>> 3224 #ifdef SERIAL_DEBUG
>> 3225 serial_putc %d0
>> 3226 #endif
>> 3227 2: moveb %a0@+,%d0
>> 3228 jne 1b
>> 3229
>> 3230 func_return puts
>> 3231
>> 3232 /*
>> 3233 * Output number in hex notation.
>> 3234 */
>> 3235
>> 3236 func_start putn,%d0-%d2
>> 3237
>> 3238 putc ' '
>> 3239
>> 3240 movel ARG1,%d0
>> 3241 moveq #7,%d1
>> 3242 1: roll #4,%d0
>> 3243 move %d0,%d2
>> 3244 andb #0x0f,%d2
>> 3245 addb #'0',%d2
>> 3246 cmpb #'9',%d2
>> 3247 jls 2f
>> 3248 addb #'A'-('9'+1),%d2
>> 3249 2:
>> 3250 #ifdef CONSOLE_DEBUG
>> 3251 console_putc %d2
>> 3252 #endif
>> 3253 #ifdef SERIAL_DEBUG
>> 3254 serial_putc %d2
>> 3255 #endif
>> 3256 dbra %d1,1b
>> 3257
>> 3258 func_return putn
>> 3259
>> 3260 #ifdef CONFIG_EARLY_PRINTK
>> 3261 /*
>> 3262 * This routine takes its parameters on the stack. It then
>> 3263 * turns around and calls the internal routines. This routine
>> 3264 * is used by the boot console.
>> 3265 *
>> 3266 * The calling parameters are:
>> 3267 * void debug_cons_nputs(const char *str, unsigned length)
>> 3268 *
>> 3269 * This routine does NOT understand variable arguments only
>> 3270 * simple strings!
>> 3271 */
>> 3272 ENTRY(debug_cons_nputs)
>> 3273 moveml %d0/%d1/%a0,%sp@-
>> 3274 movew %sr,%sp@-
>> 3275 ori #0x0700,%sr
>> 3276 movel %sp@(18),%a0 /* fetch parameter */
>> 3277 movel %sp@(22),%d1 /* fetch parameter */
>> 3278 jra 2f
>> 3279 1:
>> 3280 #ifdef CONSOLE_DEBUG
>> 3281 console_putc %d0
>> 3282 #endif
>> 3283 #ifdef SERIAL_DEBUG
>> 3284 serial_putc %d0
>> 3285 #endif
>> 3286 subq #1,%d1
>> 3287 2: jeq 3f
>> 3288 moveb %a0@+,%d0
>> 3289 jne 1b
>> 3290 3:
>> 3291 movew %sp@+,%sr
>> 3292 moveml %sp@+,%d0/%d1/%a0
>> 3293 rts
>> 3294 #endif /* CONFIG_EARLY_PRINTK */
>> 3295
>> 3296 #if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
>> 3297 func_start set_leds,%d0/%a0
>> 3298 movel ARG1,%d0
>> 3299 #ifdef CONFIG_HP300
>> 3300 is_not_hp300(1f)
>> 3301 movel %pc@(L(iobase)),%a0
>> 3302 moveb %d0,%a0@(0x1ffff)
>> 3303 jra 2f
>> 3304 #endif
>> 3305 1:
>> 3306 #ifdef CONFIG_APOLLO
>> 3307 movel %pc@(L(iobase)),%a0
>> 3308 lsll #8,%d0
>> 3309 eorw #0xff00,%d0
>> 3310 moveb %d0,%a0@(LCPUCTRL)
>> 3311 #endif
>> 3312 2:
>> 3313 func_return set_leds
>> 3314 #endif
>> 3315
>> 3316 #ifdef CONSOLE_DEBUG
>> 3317 /*
>> 3318 * For continuity, see the data alignment
>> 3319 * to which this structure is tied.
>> 3320 */
>> 3321 #define Lconsole_struct_cur_column 0
>> 3322 #define Lconsole_struct_cur_row 4
>> 3323 #define Lconsole_struct_num_columns 8
>> 3324 #define Lconsole_struct_num_rows 12
>> 3325 #define Lconsole_struct_left_edge 16
>> 3326
>> 3327 func_start console_init,%a0-%a4/%d0-%d7
>> 3328 /*
>> 3329 * Some of the register usage that follows
>> 3330 * a0 = pointer to boot_info
>> 3331 * a1 = pointer to screen
>> 3332 * a2 = pointer to console_globals
>> 3333 * d3 = pixel width of screen
>> 3334 * d4 = pixel height of screen
>> 3335 * (d3,d4) ~= (x,y) of a point just below
>> 3336 * and to the right of the screen
>> 3337 * NOT on the screen!
>> 3338 * d5 = number of bytes per scan line
>> 3339 * d6 = number of bytes on the entire screen
>> 3340 */
>> 3341
>> 3342 lea %pc@(L(console_globals)),%a2
>> 3343 movel %pc@(L(mac_videobase)),%a1
>> 3344 movel %pc@(L(mac_rowbytes)),%d5
>> 3345 movel %pc@(L(mac_dimensions)),%d3 /* -> low byte */
>> 3346 movel %d3,%d4
>> 3347 swap %d4 /* -> high byte */
>> 3348 andl #0xffff,%d3 /* d3 = screen width in pixels */
>> 3349 andl #0xffff,%d4 /* d4 = screen height in pixels */
>> 3350
>> 3351 movel %d5,%d6
>> 3352 | subl #20,%d6
>> 3353 mulul %d4,%d6 /* scan line bytes x num scan lines */
>> 3354 divul #8,%d6 /* we'll clear 8 bytes at a time */
>> 3355 moveq #-1,%d0 /* Mac_black */
>> 3356 subq #1,%d6
>> 3357
>> 3358 L(console_clear_loop):
>> 3359 movel %d0,%a1@+
>> 3360 movel %d0,%a1@+
>> 3361 dbra %d6,L(console_clear_loop)
>> 3362
>> 3363 /* Calculate font size */
>> 3364
>> 3365 #if defined(FONT_8x8) && defined(CONFIG_FONT_8x8)
>> 3366 lea %pc@(font_vga_8x8),%a0
>> 3367 #elif defined(FONT_8x16) && defined(CONFIG_FONT_8x16)
>> 3368 lea %pc@(font_vga_8x16),%a0
>> 3369 #elif defined(FONT_6x11) && defined(CONFIG_FONT_6x11)
>> 3370 lea %pc@(font_vga_6x11),%a0
>> 3371 #elif defined(CONFIG_FONT_8x8) /* default */
>> 3372 lea %pc@(font_vga_8x8),%a0
>> 3373 #else /* no compiled-in font */
>> 3374 lea 0,%a0
>> 3375 #endif
>> 3376
>> 3377 /*
>> 3378 * At this point we make a shift in register usage
>> 3379 * a1 = address of console_font pointer
>> 3380 */
>> 3381 lea %pc@(L(console_font)),%a1
>> 3382 movel %a0,%a1@ /* store pointer to struct fbcon_font_desc in console_font */
>> 3383 tstl %a0
>> 3384 jeq 1f
>> 3385 lea %pc@(L(console_font_data)),%a4
>> 3386 movel %a0@(FONT_DESC_DATA),%d0
>> 3387 subl #L(console_font),%a1
>> 3388 addl %a1,%d0
>> 3389 movel %d0,%a4@
>> 3390
>> 3391 /*
>> 3392 * Calculate global maxs
>> 3393 * Note - we can use either an
>> 3394 * 8 x 16 or 8 x 8 character font
>> 3395 * 6 x 11 also supported
>> 3396 */
>> 3397 /* ASSERT: a0 = contents of Lconsole_font */
>> 3398 movel %d3,%d0 /* screen width in pixels */
>> 3399 divul %a0@(FONT_DESC_WIDTH),%d0 /* d0 = max num chars per row */
>> 3400
>> 3401 movel %d4,%d1 /* screen height in pixels */
>> 3402 divul %a0@(FONT_DESC_HEIGHT),%d1 /* d1 = max num rows */
>> 3403
>> 3404 movel %d0,%a2@(Lconsole_struct_num_columns)
>> 3405 movel %d1,%a2@(Lconsole_struct_num_rows)
>> 3406
>> 3407 /*
>> 3408 * Clear the current row and column
>> 3409 */
>> 3410 clrl %a2@(Lconsole_struct_cur_column)
>> 3411 clrl %a2@(Lconsole_struct_cur_row)
>> 3412 clrl %a2@(Lconsole_struct_left_edge)
>> 3413
>> 3414 /*
>> 3415 * Initialization is complete
>> 3416 */
>> 3417 1:
>> 3418 func_return console_init
>> 3419
>> 3420 #ifdef CONFIG_LOGO
>> 3421 func_start console_put_penguin,%a0-%a1/%d0-%d7
>> 3422 /*
>> 3423 * Get 'that_penguin' onto the screen in the upper right corner
>> 3424 * penguin is 64 x 74 pixels, align against right edge of screen
>> 3425 */
>> 3426 lea %pc@(L(mac_dimensions)),%a0
>> 3427 movel %a0@,%d0
>> 3428 andil #0xffff,%d0
>> 3429 subil #64,%d0 /* snug up against the right edge */
>> 3430 clrl %d1 /* start at the top */
>> 3431 movel #73,%d7
>> 3432 lea %pc@(L(that_penguin)),%a1
>> 3433 L(console_penguin_row):
>> 3434 movel #31,%d6
>> 3435 L(console_penguin_pixel_pair):
>> 3436 moveb %a1@,%d2
>> 3437 lsrb #4,%d2
>> 3438 console_plot_pixel %d0,%d1,%d2
>> 3439 addq #1,%d0
>> 3440 moveb %a1@+,%d2
>> 3441 console_plot_pixel %d0,%d1,%d2
>> 3442 addq #1,%d0
>> 3443 dbra %d6,L(console_penguin_pixel_pair)
>> 3444
>> 3445 subil #64,%d0
>> 3446 addq #1,%d1
>> 3447 dbra %d7,L(console_penguin_row)
>> 3448
>> 3449 func_return console_put_penguin
>> 3450
>> 3451 /* include penguin bitmap */
>> 3452 L(that_penguin):
>> 3453 #include "../mac/mac_penguin.S"
>> 3454 #endif
>> 3455
>> 3456 /*
>> 3457 * Calculate source and destination addresses
>> 3458 * output a1 = dest
>> 3459 * a2 = source
>> 3460 */
>> 3461
>> 3462 func_start console_scroll,%a0-%a4/%d0-%d7
>> 3463 lea %pc@(L(mac_videobase)),%a0
>> 3464 movel %a0@,%a1
>> 3465 movel %a1,%a2
>> 3466 lea %pc@(L(mac_rowbytes)),%a0
>> 3467 movel %a0@,%d5
>> 3468 movel %pc@(L(console_font)),%a0
>> 3469 tstl %a0
>> 3470 jeq 1f
>> 3471 mulul %a0@(FONT_DESC_HEIGHT),%d5 /* account for # scan lines per character */
>> 3472 addal %d5,%a2
>> 3473
>> 3474 /*
>> 3475 * Get dimensions
>> 3476 */
>> 3477 lea %pc@(L(mac_dimensions)),%a0
>> 3478 movel %a0@,%d3
>> 3479 movel %d3,%d4
>> 3480 swap %d4
>> 3481 andl #0xffff,%d3 /* d3 = screen width in pixels */
>> 3482 andl #0xffff,%d4 /* d4 = screen height in pixels */
>> 3483
>> 3484 /*
>> 3485 * Calculate number of bytes to move
>> 3486 */
>> 3487 lea %pc@(L(mac_rowbytes)),%a0
>> 3488 movel %a0@,%d6
>> 3489 movel %pc@(L(console_font)),%a0
>> 3490 subl %a0@(FONT_DESC_HEIGHT),%d4 /* we're not scrolling the top row! */
>> 3491 mulul %d4,%d6 /* scan line bytes x num scan lines */
>> 3492 divul #32,%d6 /* we'll move 8 longs at a time */
>> 3493 subq #1,%d6
>> 3494
>> 3495 L(console_scroll_loop):
>> 3496 movel %a2@+,%a1@+
>> 3497 movel %a2@+,%a1@+
>> 3498 movel %a2@+,%a1@+
>> 3499 movel %a2@+,%a1@+
>> 3500 movel %a2@+,%a1@+
>> 3501 movel %a2@+,%a1@+
>> 3502 movel %a2@+,%a1@+
>> 3503 movel %a2@+,%a1@+
>> 3504 dbra %d6,L(console_scroll_loop)
>> 3505
>> 3506 lea %pc@(L(mac_rowbytes)),%a0
>> 3507 movel %a0@,%d6
>> 3508 movel %pc@(L(console_font)),%a0
>> 3509 mulul %a0@(FONT_DESC_HEIGHT),%d6 /* scan line bytes x font height */
>> 3510 divul #32,%d6 /* we'll move 8 words at a time */
>> 3511 subq #1,%d6
>> 3512
>> 3513 moveq #-1,%d0
>> 3514 L(console_scroll_clear_loop):
>> 3515 movel %d0,%a1@+
>> 3516 movel %d0,%a1@+
>> 3517 movel %d0,%a1@+
>> 3518 movel %d0,%a1@+
>> 3519 movel %d0,%a1@+
>> 3520 movel %d0,%a1@+
>> 3521 movel %d0,%a1@+
>> 3522 movel %d0,%a1@+
>> 3523 dbra %d6,L(console_scroll_clear_loop)
>> 3524
>> 3525 1:
>> 3526 func_return console_scroll
>> 3527
>> 3528
>> 3529 func_start console_putc,%a0/%a1/%d0-%d7
>> 3530
>> 3531 is_not_mac(L(console_exit))
>> 3532 tstl %pc@(L(console_font))
>> 3533 jeq L(console_exit)
>> 3534
>> 3535 /* Output character in d7 on console.
>> 3536 */
>> 3537 movel ARG1,%d7
>> 3538 cmpib #'\n',%d7
>> 3539 jbne 1f
>> 3540
>> 3541 /* A little safe recursion is good for the soul */
>> 3542 console_putc #'\r'
>> 3543 1:
>> 3544 lea %pc@(L(console_globals)),%a0
>> 3545
>> 3546 cmpib #10,%d7
>> 3547 jne L(console_not_lf)
>> 3548 movel %a0@(Lconsole_struct_cur_row),%d0
>> 3549 addil #1,%d0
>> 3550 movel %d0,%a0@(Lconsole_struct_cur_row)
>> 3551 movel %a0@(Lconsole_struct_num_rows),%d1
>> 3552 cmpl %d1,%d0
>> 3553 jcs 1f
>> 3554 subil #1,%d0
>> 3555 movel %d0,%a0@(Lconsole_struct_cur_row)
>> 3556 console_scroll
>> 3557 1:
>> 3558 jra L(console_exit)
>> 3559
>> 3560 L(console_not_lf):
>> 3561 cmpib #13,%d7
>> 3562 jne L(console_not_cr)
>> 3563 clrl %a0@(Lconsole_struct_cur_column)
>> 3564 jra L(console_exit)
>> 3565
>> 3566 L(console_not_cr):
>> 3567 cmpib #1,%d7
>> 3568 jne L(console_not_home)
>> 3569 clrl %a0@(Lconsole_struct_cur_row)
>> 3570 clrl %a0@(Lconsole_struct_cur_column)
>> 3571 jra L(console_exit)
>> 3572
>> 3573 /*
>> 3574 * At this point we know that the %d7 character is going to be
>> 3575 * rendered on the screen. Register usage is -
>> 3576 * a0 = pointer to console globals
>> 3577 * a1 = font data
>> 3578 * d0 = cursor column
>> 3579 * d1 = cursor row to draw the character
>> 3580 * d7 = character number
>> 3581 */
>> 3582 L(console_not_home):
>> 3583 movel %a0@(Lconsole_struct_cur_column),%d0
>> 3584 addql #1,%a0@(Lconsole_struct_cur_column)
>> 3585 movel %a0@(Lconsole_struct_num_columns),%d1
>> 3586 cmpl %d1,%d0
>> 3587 jcs 1f
>> 3588 console_putc #'\n' /* recursion is OK! */
>> 3589 1:
>> 3590 movel %a0@(Lconsole_struct_cur_row),%d1
>> 3591
>> 3592 /*
>> 3593 * At this point we make a shift in register usage
>> 3594 * a0 = address of pointer to font data (fbcon_font_desc)
>> 3595 */
>> 3596 movel %pc@(L(console_font)),%a0
>> 3597 movel %pc@(L(console_font_data)),%a1 /* Load fbcon_font_desc.data into a1 */
>> 3598 andl #0x000000ff,%d7
>> 3599 /* ASSERT: a0 = contents of Lconsole_font */
>> 3600 mulul %a0@(FONT_DESC_HEIGHT),%d7 /* d7 = index into font data */
>> 3601 addl %d7,%a1 /* a1 = points to char image */
>> 3602
>> 3603 /*
>> 3604 * At this point we make a shift in register usage
>> 3605 * d0 = pixel coordinate, x
>> 3606 * d1 = pixel coordinate, y
>> 3607 * d2 = (bit 0) 1/0 for white/black (!) pixel on screen
>> 3608 * d3 = font scan line data (8 pixels)
>> 3609 * d6 = count down for the font's pixel width (8)
>> 3610 * d7 = count down for the font's pixel count in height
>> 3611 */
>> 3612 /* ASSERT: a0 = contents of Lconsole_font */
>> 3613 mulul %a0@(FONT_DESC_WIDTH),%d0
>> 3614 mulul %a0@(FONT_DESC_HEIGHT),%d1
>> 3615 movel %a0@(FONT_DESC_HEIGHT),%d7 /* Load fbcon_font_desc.height into d7 */
>> 3616 subq #1,%d7
>> 3617 L(console_read_char_scanline):
>> 3618 moveb %a1@+,%d3
>> 3619
>> 3620 /* ASSERT: a0 = contents of Lconsole_font */
>> 3621 movel %a0@(FONT_DESC_WIDTH),%d6 /* Load fbcon_font_desc.width into d6 */
>> 3622 subql #1,%d6
>> 3623
>> 3624 L(console_do_font_scanline):
>> 3625 lslb #1,%d3
>> 3626 scsb %d2 /* convert 1 bit into a byte */
>> 3627 console_plot_pixel %d0,%d1,%d2
>> 3628 addq #1,%d0
>> 3629 dbra %d6,L(console_do_font_scanline)
>> 3630
>> 3631 /* ASSERT: a0 = contents of Lconsole_font */
>> 3632 subl %a0@(FONT_DESC_WIDTH),%d0
>> 3633 addq #1,%d1
>> 3634 dbra %d7,L(console_read_char_scanline)
>> 3635
>> 3636 L(console_exit):
>> 3637 func_return console_putc
>> 3638
>> 3639 /*
>> 3640 * Input:
>> 3641 * d0 = x coordinate
>> 3642 * d1 = y coordinate
>> 3643 * d2 = (bit 0) 1/0 for white/black (!)
>> 3644 * All registers are preserved
>> 3645 */
>> 3646 func_start console_plot_pixel,%a0-%a1/%d0-%d4
>> 3647
>> 3648 movel %pc@(L(mac_videobase)),%a1
>> 3649 movel %pc@(L(mac_videodepth)),%d3
>> 3650 movel ARG1,%d0
>> 3651 movel ARG2,%d1
>> 3652 mulul %pc@(L(mac_rowbytes)),%d1
>> 3653 movel ARG3,%d2
>> 3654
>> 3655 /*
>> 3656 * Register usage:
>> 3657 * d0 = x coord becomes byte offset into frame buffer
>> 3658 * d1 = y coord
>> 3659 * d2 = black or white (0/1)
>> 3660 * d3 = video depth
>> 3661 * d4 = temp of x (d0) for many bit depths
>> 3662 */
>> 3663 L(test_1bit):
>> 3664 cmpb #1,%d3
>> 3665 jbne L(test_2bit)
>> 3666 movel %d0,%d4 /* we need the low order 3 bits! */
>> 3667 divul #8,%d0
>> 3668 addal %d0,%a1
>> 3669 addal %d1,%a1
>> 3670 andb #7,%d4
>> 3671 eorb #7,%d4 /* reverse the x-coordinate w/ screen-bit # */
>> 3672 andb #1,%d2
>> 3673 jbne L(white_1)
>> 3674 bsetb %d4,%a1@
>> 3675 jbra L(console_plot_pixel_exit)
>> 3676 L(white_1):
>> 3677 bclrb %d4,%a1@
>> 3678 jbra L(console_plot_pixel_exit)
>> 3679
>> 3680 L(test_2bit):
>> 3681 cmpb #2,%d3
>> 3682 jbne L(test_4bit)
>> 3683 movel %d0,%d4 /* we need the low order 2 bits! */
>> 3684 divul #4,%d0
>> 3685 addal %d0,%a1
>> 3686 addal %d1,%a1
>> 3687 andb #3,%d4
>> 3688 eorb #3,%d4 /* reverse the x-coordinate w/ screen-bit # */
>> 3689 lsll #1,%d4 /* ! */
>> 3690 andb #1,%d2
>> 3691 jbne L(white_2)
>> 3692 bsetb %d4,%a1@
>> 3693 addq #1,%d4
>> 3694 bsetb %d4,%a1@
>> 3695 jbra L(console_plot_pixel_exit)
>> 3696 L(white_2):
>> 3697 bclrb %d4,%a1@
>> 3698 addq #1,%d4
>> 3699 bclrb %d4,%a1@
>> 3700 jbra L(console_plot_pixel_exit)
>> 3701
>> 3702 L(test_4bit):
>> 3703 cmpb #4,%d3
>> 3704 jbne L(test_8bit)
>> 3705 movel %d0,%d4 /* we need the low order bit! */
>> 3706 divul #2,%d0
>> 3707 addal %d0,%a1
>> 3708 addal %d1,%a1
>> 3709 andb #1,%d4
>> 3710 eorb #1,%d4
>> 3711 lsll #2,%d4 /* ! */
>> 3712 andb #1,%d2
>> 3713 jbne L(white_4)
>> 3714 bsetb %d4,%a1@
>> 3715 addq #1,%d4
>> 3716 bsetb %d4,%a1@
>> 3717 addq #1,%d4
>> 3718 bsetb %d4,%a1@
>> 3719 addq #1,%d4
>> 3720 bsetb %d4,%a1@
>> 3721 jbra L(console_plot_pixel_exit)
>> 3722 L(white_4):
>> 3723 bclrb %d4,%a1@
>> 3724 addq #1,%d4
>> 3725 bclrb %d4,%a1@
>> 3726 addq #1,%d4
>> 3727 bclrb %d4,%a1@
>> 3728 addq #1,%d4
>> 3729 bclrb %d4,%a1@
>> 3730 jbra L(console_plot_pixel_exit)
>> 3731
>> 3732 L(test_8bit):
>> 3733 cmpb #8,%d3
>> 3734 jbne L(test_16bit)
>> 3735 addal %d0,%a1
>> 3736 addal %d1,%a1
>> 3737 andb #1,%d2
>> 3738 jbne L(white_8)
>> 3739 moveb #0xff,%a1@
>> 3740 jbra L(console_plot_pixel_exit)
>> 3741 L(white_8):
>> 3742 clrb %a1@
>> 3743 jbra L(console_plot_pixel_exit)
>> 3744
>> 3745 L(test_16bit):
>> 3746 cmpb #16,%d3
>> 3747 jbne L(console_plot_pixel_exit)
>> 3748 addal %d0,%a1
>> 3749 addal %d0,%a1
>> 3750 addal %d1,%a1
>> 3751 andb #1,%d2
>> 3752 jbne L(white_16)
>> 3753 clrw %a1@
>> 3754 jbra L(console_plot_pixel_exit)
>> 3755 L(white_16):
>> 3756 movew #0x0fff,%a1@
>> 3757 jbra L(console_plot_pixel_exit)
>> 3758
>> 3759 L(console_plot_pixel_exit):
>> 3760 func_return console_plot_pixel
>> 3761 #endif /* CONSOLE_DEBUG */
>> 3762
>> 3763
>> 3764 __INITDATA
>> 3765 .align 4
>> 3766
>> 3767 m68k_init_mapped_size:
>> 3768 .long 0
>> 3769
>> 3770 #if defined(CONFIG_ATARI) || defined(CONFIG_AMIGA) || \
>> 3771 defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
>> 3772 L(custom):
>> 3773 L(iobase):
>> 3774 .long 0
>> 3775 #endif
>> 3776
>> 3777 #ifdef CONSOLE_DEBUG
>> 3778 L(console_globals):
>> 3779 .long 0 /* cursor column */
>> 3780 .long 0 /* cursor row */
>> 3781 .long 0 /* max num columns */
>> 3782 .long 0 /* max num rows */
>> 3783 .long 0 /* left edge */
>> 3784 L(console_font):
>> 3785 .long 0 /* pointer to console font (struct font_desc) */
>> 3786 L(console_font_data):
>> 3787 .long 0 /* pointer to console font data */
>> 3788 #endif /* CONSOLE_DEBUG */
>> 3789
>> 3790 #if defined(MMU_PRINT)
>> 3791 L(mmu_print_data):
>> 3792 .long 0 /* valid flag */
>> 3793 .long 0 /* start logical */
>> 3794 .long 0 /* next logical */
>> 3795 .long 0 /* start physical */
>> 3796 .long 0 /* next physical */
>> 3797 #endif /* MMU_PRINT */
>> 3798
>> 3799 L(cputype):
>> 3800 .long 0
>> 3801 L(mmu_cached_pointer_tables):
>> 3802 .long 0
>> 3803 L(mmu_num_pointer_tables):
>> 3804 .long 0
>> 3805 L(phys_kernel_start):
>> 3806 .long 0
>> 3807 L(kernel_end):
>> 3808 .long 0
>> 3809 L(memory_start):
>> 3810 .long 0
>> 3811 L(kernel_pgdir_ptr):
>> 3812 .long 0
>> 3813 L(temp_mmap_mem):
>> 3814 .long 0
>> 3815
>> 3816 #if defined (CONFIG_MVME147)
>> 3817 M147_SCC_CTRL_A = 0xfffe3002
>> 3818 M147_SCC_DATA_A = 0xfffe3003
>> 3819 #endif
>> 3820
>> 3821 #if defined (CONFIG_MVME16x)
>> 3822 M162_SCC_CTRL_A = 0xfff45005
>> 3823 M167_CYCAR = 0xfff450ee
>> 3824 M167_CYIER = 0xfff45011
>> 3825 M167_CYLICR = 0xfff45026
>> 3826 M167_CYTEOIR = 0xfff45085
>> 3827 M167_CYTDR = 0xfff450f8
>> 3828 M167_PCSCCMICR = 0xfff4201d
>> 3829 M167_PCSCCTICR = 0xfff4201e
>> 3830 M167_PCSCCRICR = 0xfff4201f
>> 3831 M167_PCTPIACKR = 0xfff42025
>> 3832 #endif
>> 3833
>> 3834 #if defined (CONFIG_BVME6000)
>> 3835 BVME_SCC_CTRL_A = 0xffb0000b
>> 3836 BVME_SCC_DATA_A = 0xffb0000f
>> 3837 #endif
>> 3838
>> 3839 #if defined(CONFIG_MAC)
>> 3840 L(mac_videobase):
>> 3841 .long 0
>> 3842 L(mac_videodepth):
>> 3843 .long 0
>> 3844 L(mac_dimensions):
>> 3845 .long 0
>> 3846 L(mac_rowbytes):
>> 3847 .long 0
>> 3848 L(mac_sccbase):
>> 3849 .long 0
>> 3850 #endif /* CONFIG_MAC */
>> 3851
>> 3852 #if defined (CONFIG_APOLLO)
>> 3853 LSRB0 = 0x10412
>> 3854 LTHRB0 = 0x10416
>> 3855 LCPUCTRL = 0x10100
>> 3856 #endif
>> 3857
>> 3858 #if defined(CONFIG_HP300)
>> 3859 DCADATA = 0x11
>> 3860 DCALSR = 0x1b
>> 3861 APCIDATA = 0x00
>> 3862 APCILSR = 0x14
>> 3863 L(uartbase):
>> 3864 .long 0
>> 3865 L(uart_scode):
>> 3866 .long -1
>> 3867 #endif
>> 3868
>> 3869 __FINIT
>> 3870 .data
>> 3871 .align 4
>> 3872
>> 3873 availmem:
>> 3874 .long 0
>> 3875 m68k_pgtable_cachemode:
>> 3876 .long 0
>> 3877 m68k_supervisor_cachemode:
>> 3878 .long 0
>> 3879 #if defined(CONFIG_MVME16x)
>> 3880 mvme_bdid:
>> 3881 .long 0,0,0,0,0,0,0,0
>> 3882 #endif
>> 3883 #if defined(CONFIG_Q40)
>> 3884 q40_mem_cptr:
>> 3885 .long 0
>> 3886 L(q40_do_debug):
>> 3887 .long 0
>> 3888 #endif
>> 3889
>> 3890 #if defined(CONFIG_VIRT)
>> 3891 GF_PUT_CHAR = 0x00
>> 3892 L(virt_gf_tty_base):
>> 3893 .long 0
>> 3894 #endif /* CONFIG_VIRT */
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.