1 # SPDX-License-Identifier: GPL-2.0 1 # SPDX-License-Identifier: GPL-2.0
2 config M68K !! 2 config MIPS
3 bool 3 bool
4 default y 4 default y
5 select ARCH_32BIT_OFF_T !! 5 select ARCH_32BIT_OFF_T if !64BIT
6 select ARCH_HAS_BINFMT_FLAT !! 6 select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
7 select ARCH_HAS_CPU_CACHE_ALIASING 7 select ARCH_HAS_CPU_CACHE_ALIASING
8 select ARCH_HAS_CPU_FINALIZE_INIT if M !! 8 select ARCH_HAS_CPU_FINALIZE_INIT
9 select ARCH_HAS_CURRENT_STACK_POINTER !! 9 select ARCH_HAS_CURRENT_STACK_POINTER if !CC_IS_CLANG || CLANG_VERSION >= 140000
10 select ARCH_HAS_DMA_PREP_COHERENT if M !! 10 select ARCH_HAS_DEBUG_VIRTUAL if !64BIT
11 select ARCH_HAS_SYNC_DMA_FOR_DEVICE if !! 11 select ARCH_HAS_DMA_OPS if MACH_JAZZ
12 select ARCH_HAVE_NMI_SAFE_CMPXCHG if R !! 12 select ARCH_HAS_FORTIFY_SOURCE
13 select ARCH_MIGHT_HAVE_PC_PARPORT if I !! 13 select ARCH_HAS_KCOV
14 select ARCH_NO_PREEMPT if !COLDFIRE !! 14 select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE if !EVA
15 select ARCH_USE_MEMTEST if MMU_MOTOROL !! 15 select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI)
>> 16 select ARCH_HAS_STRNCPY_FROM_USER
>> 17 select ARCH_HAS_STRNLEN_USER
>> 18 select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
>> 19 select ARCH_HAS_UBSAN
>> 20 select ARCH_HAS_GCOV_PROFILE_ALL
>> 21 select ARCH_KEEP_MEMBLOCK
>> 22 select ARCH_USE_BUILTIN_BSWAP
>> 23 select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
>> 24 select ARCH_USE_MEMTEST
>> 25 select ARCH_USE_QUEUED_RWLOCKS
>> 26 select ARCH_USE_QUEUED_SPINLOCKS
>> 27 select ARCH_SUPPORTS_HUGETLBFS if CPU_SUPPORTS_HUGEPAGES
>> 28 select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
16 select ARCH_WANT_IPC_PARSE_VERSION 29 select ARCH_WANT_IPC_PARSE_VERSION
17 select BINFMT_FLAT_ARGVP_ENVP_ON_STACK !! 30 select ARCH_WANT_LD_ORPHAN_WARN
18 select DMA_DIRECT_REMAP if M68K_NONCOH !! 31 select BUILDTIME_TABLE_SORT
19 select GENERIC_ATOMIC64 !! 32 select CLONE_BACKWARDS
20 select GENERIC_CPU_DEVICES !! 33 select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
21 select GENERIC_IOMAP if HAS_IOPORT !! 34 select CPU_PM if CPU_IDLE || SUSPEND
>> 35 select GENERIC_ATOMIC64 if !64BIT
>> 36 select GENERIC_CMOS_UPDATE
>> 37 select GENERIC_CPU_AUTOPROBE
>> 38 select GENERIC_GETTIMEOFDAY
>> 39 select GENERIC_IOMAP
>> 40 select GENERIC_IRQ_PROBE
22 select GENERIC_IRQ_SHOW 41 select GENERIC_IRQ_SHOW
>> 42 select GENERIC_ISA_DMA if EISA
23 select GENERIC_LIB_ASHLDI3 43 select GENERIC_LIB_ASHLDI3
24 select GENERIC_LIB_ASHRDI3 44 select GENERIC_LIB_ASHRDI3
>> 45 select GENERIC_LIB_CMPDI2
25 select GENERIC_LIB_LSHRDI3 46 select GENERIC_LIB_LSHRDI3
26 select HAS_IOPORT if PCI || ISA || ATA !! 47 select GENERIC_LIB_UCMPDI2
27 select HAVE_ARCH_SECCOMP !! 48 select GENERIC_SCHED_CLOCK if !CAVIUM_OCTEON_SOC
>> 49 select GENERIC_SMP_IDLE_THREAD
>> 50 select GENERIC_IDLE_POLL_SETUP
>> 51 select GENERIC_TIME_VSYSCALL
>> 52 select GUP_GET_PXX_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT
>> 53 select HAS_IOPORT if !NO_IOPORT_MAP || ISA
>> 54 select HAVE_ARCH_COMPILER_H
>> 55 select HAVE_ARCH_JUMP_LABEL
>> 56 select HAVE_ARCH_KGDB if MIPS_FP_SUPPORT
>> 57 select HAVE_ARCH_MMAP_RND_BITS if MMU
>> 58 select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT
28 select HAVE_ARCH_SECCOMP_FILTER 59 select HAVE_ARCH_SECCOMP_FILTER
>> 60 select HAVE_ARCH_TRACEHOOK
>> 61 select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES
29 select HAVE_ASM_MODVERSIONS 62 select HAVE_ASM_MODVERSIONS
30 select HAVE_DEBUG_BUGVERBOSE !! 63 select HAVE_CONTEXT_TRACKING_USER
31 select HAVE_EFFICIENT_UNALIGNED_ACCESS !! 64 select HAVE_TIF_NOHZ
>> 65 select HAVE_C_RECORDMCOUNT
>> 66 select HAVE_DEBUG_KMEMLEAK
>> 67 select HAVE_DEBUG_STACKOVERFLOW
>> 68 select HAVE_DMA_CONTIGUOUS
>> 69 select HAVE_DYNAMIC_FTRACE
>> 70 select HAVE_EBPF_JIT if !CPU_MICROMIPS
>> 71 select HAVE_EXIT_THREAD
>> 72 select HAVE_GUP_FAST
>> 73 select HAVE_FTRACE_MCOUNT_RECORD
>> 74 select HAVE_FUNCTION_GRAPH_TRACER
>> 75 select HAVE_FUNCTION_TRACER
>> 76 select HAVE_GCC_PLUGINS
>> 77 select HAVE_GENERIC_VDSO
>> 78 select HAVE_IOREMAP_PROT
>> 79 select HAVE_IRQ_EXIT_ON_IRQ_STACK
>> 80 select HAVE_IRQ_TIME_ACCOUNTING
>> 81 select HAVE_KPROBES
>> 82 select HAVE_KRETPROBES
>> 83 select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
32 select HAVE_MOD_ARCH_SPECIFIC 84 select HAVE_MOD_ARCH_SPECIFIC
33 select HAVE_UID16 !! 85 select HAVE_NMI
34 select MMU_GATHER_NO_RANGE if MMU !! 86 select HAVE_PAGE_SIZE_4KB if !CPU_LOONGSON2EF && !CPU_LOONGSON64
35 select MODULES_USE_ELF_REL !! 87 select HAVE_PAGE_SIZE_16KB if !CPU_R3000
36 select MODULES_USE_ELF_RELA !! 88 select HAVE_PAGE_SIZE_64KB if !CPU_R3000
37 select NO_DMA if !MMU && !COLDFIRE !! 89 select HAVE_PERF_EVENTS
38 select OLD_SIGACTION !! 90 select HAVE_PERF_REGS
39 select OLD_SIGSUSPEND3 !! 91 select HAVE_PERF_USER_STACK_DUMP
40 select UACCESS_MEMCPY if !MMU !! 92 select HAVE_REGS_AND_STACK_ACCESS_API
41 select ZONE_DMA !! 93 select HAVE_RSEQ
>> 94 select HAVE_SPARSE_SYSCALL_NR
>> 95 select HAVE_STACKPROTECTOR
>> 96 select HAVE_SYSCALL_TRACEPOINTS
>> 97 select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
>> 98 select IRQ_FORCED_THREADING
>> 99 select ISA if EISA
>> 100 select LOCK_MM_AND_FIND_VMA
>> 101 select MODULES_USE_ELF_REL if MODULES
>> 102 select MODULES_USE_ELF_RELA if MODULES && 64BIT
>> 103 select PERF_USE_VMALLOC
>> 104 select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
>> 105 select RTC_LIB
>> 106 select SYSCTL_EXCEPTION_TRACE
>> 107 select TRACE_IRQFLAGS_SUPPORT
>> 108 select ARCH_HAS_ELFCORE_COMPAT
>> 109 select HAVE_ARCH_KCSAN if 64BIT
42 110
43 config CPU_BIG_ENDIAN !! 111 config MIPS_FIXUP_BIGPHYS_ADDR
44 def_bool y !! 112 bool
>> 113
>> 114 config MIPS_GENERIC
>> 115 bool
45 116
46 config ARCH_HAS_ILOG2_U32 !! 117 config MACH_GENERIC_CORE
47 bool 118 bool
48 119
49 config ARCH_HAS_ILOG2_U64 !! 120 config MACH_INGENIC
>> 121 bool
>> 122 select SYS_SUPPORTS_32BIT_KERNEL
>> 123 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 124 select SYS_SUPPORTS_ZBOOT
>> 125 select DMA_NONCOHERENT
>> 126 select IRQ_MIPS_CPU
>> 127 select PINCTRL
>> 128 select GPIOLIB
>> 129 select COMMON_CLK
>> 130 select GENERIC_IRQ_CHIP
>> 131 select BUILTIN_DTB if MIPS_NO_APPENDED_DTB
>> 132 select USE_OF
>> 133 select CPU_SUPPORTS_CPUFREQ
>> 134 select MIPS_EXTERNAL_TIMER
>> 135
>> 136 menu "Machine selection"
>> 137
>> 138 choice
>> 139 prompt "System type"
>> 140 default MIPS_GENERIC_KERNEL
>> 141
>> 142 config MIPS_GENERIC_KERNEL
>> 143 bool "Generic board-agnostic MIPS kernel"
>> 144 select MIPS_GENERIC
>> 145 select BOOT_RAW
>> 146 select BUILTIN_DTB
>> 147 select CEVT_R4K
>> 148 select CLKSRC_MIPS_GIC
>> 149 select COMMON_CLK
>> 150 select CPU_MIPSR2_IRQ_EI
>> 151 select CPU_MIPSR2_IRQ_VI
>> 152 select CSRC_R4K
>> 153 select DMA_NONCOHERENT
>> 154 select HAVE_PCI
>> 155 select IRQ_MIPS_CPU
>> 156 select MACH_GENERIC_CORE
>> 157 select MIPS_AUTO_PFN_OFFSET
>> 158 select MIPS_CPU_SCACHE
>> 159 select MIPS_GIC
>> 160 select MIPS_L1_CACHE_SHIFT_7
>> 161 select NO_EXCEPT_FILL
>> 162 select PCI_DRIVERS_GENERIC
>> 163 select SMP_UP if SMP
>> 164 select SWAP_IO_SPACE
>> 165 select SYS_HAS_CPU_MIPS32_R1
>> 166 select SYS_HAS_CPU_MIPS32_R2
>> 167 select SYS_HAS_CPU_MIPS32_R5
>> 168 select SYS_HAS_CPU_MIPS32_R6
>> 169 select SYS_HAS_CPU_MIPS64_R1
>> 170 select SYS_HAS_CPU_MIPS64_R2
>> 171 select SYS_HAS_CPU_MIPS64_R5
>> 172 select SYS_HAS_CPU_MIPS64_R6
>> 173 select SYS_SUPPORTS_32BIT_KERNEL
>> 174 select SYS_SUPPORTS_64BIT_KERNEL
>> 175 select SYS_SUPPORTS_BIG_ENDIAN
>> 176 select SYS_SUPPORTS_HIGHMEM
>> 177 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 178 select SYS_SUPPORTS_MICROMIPS
>> 179 select SYS_SUPPORTS_MIPS16
>> 180 select SYS_SUPPORTS_MIPS_CPS
>> 181 select SYS_SUPPORTS_MULTITHREADING
>> 182 select SYS_SUPPORTS_RELOCATABLE
>> 183 select SYS_SUPPORTS_SMARTMIPS
>> 184 select SYS_SUPPORTS_ZBOOT
>> 185 select UHI_BOOT
>> 186 select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
>> 187 select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
>> 188 select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
>> 189 select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
>> 190 select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
>> 191 select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
>> 192 select USE_OF
>> 193 help
>> 194 Select this to build a kernel which aims to support multiple boards,
>> 195 generally using a flattened device tree passed from the bootloader
>> 196 using the boot protocol defined in the UHI (Unified Hosting
>> 197 Interface) specification.
>> 198
>> 199 config MIPS_ALCHEMY
>> 200 bool "Alchemy processor based machines"
>> 201 select PHYS_ADDR_T_64BIT
>> 202 select CEVT_R4K
>> 203 select CSRC_R4K
>> 204 select IRQ_MIPS_CPU
>> 205 select DMA_NONCOHERENT # Au1000,1500,1100 aren't, rest is
>> 206 select MIPS_FIXUP_BIGPHYS_ADDR if PCI
>> 207 select SYS_HAS_CPU_MIPS32_R1
>> 208 select SYS_SUPPORTS_32BIT_KERNEL
>> 209 select SYS_SUPPORTS_APM_EMULATION
>> 210 select GPIOLIB
>> 211 select SYS_SUPPORTS_ZBOOT
>> 212 select COMMON_CLK
>> 213
>> 214 config ATH25
>> 215 bool "Atheros AR231x/AR531x SoC support"
>> 216 select CEVT_R4K
>> 217 select CSRC_R4K
>> 218 select DMA_NONCOHERENT
>> 219 select IRQ_MIPS_CPU
>> 220 select IRQ_DOMAIN
>> 221 select SYS_HAS_CPU_MIPS32_R1
>> 222 select SYS_SUPPORTS_BIG_ENDIAN
>> 223 select SYS_SUPPORTS_32BIT_KERNEL
>> 224 select SYS_HAS_EARLY_PRINTK
>> 225 help
>> 226 Support for Atheros AR231x and Atheros AR531x based boards
>> 227
>> 228 config ATH79
>> 229 bool "Atheros AR71XX/AR724X/AR913X based boards"
>> 230 select ARCH_HAS_RESET_CONTROLLER
>> 231 select BOOT_RAW
>> 232 select CEVT_R4K
>> 233 select CSRC_R4K
>> 234 select DMA_NONCOHERENT
>> 235 select GPIOLIB
>> 236 select PINCTRL
>> 237 select COMMON_CLK
>> 238 select IRQ_MIPS_CPU
>> 239 select SYS_HAS_CPU_MIPS32_R2
>> 240 select SYS_HAS_EARLY_PRINTK
>> 241 select SYS_SUPPORTS_32BIT_KERNEL
>> 242 select SYS_SUPPORTS_BIG_ENDIAN
>> 243 select SYS_SUPPORTS_MIPS16
>> 244 select SYS_SUPPORTS_ZBOOT_UART_PROM
>> 245 select USE_OF
>> 246 select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
>> 247 help
>> 248 Support for the Atheros AR71XX/AR724X/AR913X SoCs.
>> 249
>> 250 config BMIPS_GENERIC
>> 251 bool "Broadcom Generic BMIPS kernel"
>> 252 select ARCH_HAS_RESET_CONTROLLER
>> 253 select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
>> 254 select BOOT_RAW
>> 255 select NO_EXCEPT_FILL
>> 256 select USE_OF
>> 257 select CEVT_R4K
>> 258 select CSRC_R4K
>> 259 select SYNC_R4K
>> 260 select COMMON_CLK
>> 261 select BCM6345_L1_IRQ
>> 262 select BCM7038_L1_IRQ
>> 263 select BCM7120_L2_IRQ
>> 264 select BRCMSTB_L2_IRQ
>> 265 select IRQ_MIPS_CPU
>> 266 select DMA_NONCOHERENT
>> 267 select SYS_SUPPORTS_32BIT_KERNEL
>> 268 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 269 select SYS_SUPPORTS_BIG_ENDIAN
>> 270 select SYS_SUPPORTS_HIGHMEM
>> 271 select SYS_HAS_CPU_BMIPS32_3300
>> 272 select SYS_HAS_CPU_BMIPS4350
>> 273 select SYS_HAS_CPU_BMIPS4380
>> 274 select SYS_HAS_CPU_BMIPS5000
>> 275 select SWAP_IO_SPACE
>> 276 select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
>> 277 select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
>> 278 select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
>> 279 select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
>> 280 select HARDIRQS_SW_RESEND
>> 281 select HAVE_PCI
>> 282 select PCI_DRIVERS_GENERIC
>> 283 select FW_CFE
>> 284 help
>> 285 Build a generic DT-based kernel image that boots on select
>> 286 BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top
>> 287 box chips. Note that CONFIG_CPU_BIG_ENDIAN/CONFIG_CPU_LITTLE_ENDIAN
>> 288 must be set appropriately for your board.
>> 289
>> 290 config BCM47XX
>> 291 bool "Broadcom BCM47XX based boards"
>> 292 select BOOT_RAW
>> 293 select CEVT_R4K
>> 294 select CSRC_R4K
>> 295 select DMA_NONCOHERENT
>> 296 select HAVE_PCI
>> 297 select IRQ_MIPS_CPU
>> 298 select SYS_HAS_CPU_MIPS32_R1
>> 299 select NO_EXCEPT_FILL
>> 300 select SYS_SUPPORTS_32BIT_KERNEL
>> 301 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 302 select SYS_SUPPORTS_MIPS16
>> 303 select SYS_SUPPORTS_ZBOOT
>> 304 select SYS_HAS_EARLY_PRINTK
>> 305 select USE_GENERIC_EARLY_PRINTK_8250
>> 306 select GPIOLIB
>> 307 select LEDS_GPIO_REGISTER
>> 308 select BCM47XX_NVRAM
>> 309 select BCM47XX_SPROM
>> 310 select BCM47XX_SSB if !BCM47XX_BCMA
>> 311 help
>> 312 Support for BCM47XX based boards
>> 313
>> 314 config BCM63XX
>> 315 bool "Broadcom BCM63XX based boards"
>> 316 select BOOT_RAW
>> 317 select CEVT_R4K
>> 318 select CSRC_R4K
>> 319 select SYNC_R4K
>> 320 select DMA_NONCOHERENT
>> 321 select IRQ_MIPS_CPU
>> 322 select SYS_SUPPORTS_32BIT_KERNEL
>> 323 select SYS_SUPPORTS_BIG_ENDIAN
>> 324 select SYS_HAS_EARLY_PRINTK
>> 325 select SYS_HAS_CPU_BMIPS32_3300
>> 326 select SYS_HAS_CPU_BMIPS4350
>> 327 select SYS_HAS_CPU_BMIPS4380
>> 328 select SWAP_IO_SPACE
>> 329 select GPIOLIB
>> 330 select MIPS_L1_CACHE_SHIFT_4
>> 331 select HAVE_LEGACY_CLK
>> 332 help
>> 333 Support for BCM63XX based boards
>> 334
>> 335 config MIPS_COBALT
>> 336 bool "Cobalt Server"
>> 337 select CEVT_R4K
>> 338 select CSRC_R4K
>> 339 select CEVT_GT641XX
>> 340 select DMA_NONCOHERENT
>> 341 select FORCE_PCI
>> 342 select I8253
>> 343 select I8259
>> 344 select IRQ_MIPS_CPU
>> 345 select IRQ_GT641XX
>> 346 select PCI_GT64XXX_PCI0
>> 347 select SYS_HAS_CPU_NEVADA
>> 348 select SYS_HAS_EARLY_PRINTK
>> 349 select SYS_SUPPORTS_32BIT_KERNEL
>> 350 select SYS_SUPPORTS_64BIT_KERNEL
>> 351 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 352 select USE_GENERIC_EARLY_PRINTK_8250
>> 353
>> 354 config MACH_DECSTATION
>> 355 bool "DECstations"
>> 356 select BOOT_ELF32
>> 357 select CEVT_DS1287
>> 358 select CEVT_R4K if CPU_R4X00
>> 359 select CSRC_IOASIC
>> 360 select CSRC_R4K if CPU_R4X00
>> 361 select CPU_DADDI_WORKAROUNDS if 64BIT
>> 362 select CPU_R4000_WORKAROUNDS if 64BIT
>> 363 select CPU_R4400_WORKAROUNDS if 64BIT
>> 364 select DMA_NONCOHERENT
>> 365 select NO_IOPORT_MAP
>> 366 select IRQ_MIPS_CPU
>> 367 select SYS_HAS_CPU_R3000
>> 368 select SYS_HAS_CPU_R4X00
>> 369 select SYS_SUPPORTS_32BIT_KERNEL
>> 370 select SYS_SUPPORTS_64BIT_KERNEL
>> 371 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 372 select SYS_SUPPORTS_128HZ
>> 373 select SYS_SUPPORTS_256HZ
>> 374 select SYS_SUPPORTS_1024HZ
>> 375 select MIPS_L1_CACHE_SHIFT_4
>> 376 help
>> 377 This enables support for DEC's MIPS based workstations. For details
>> 378 see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
>> 379 DECstation porting pages on <http://decstation.unix-ag.org/>.
>> 380
>> 381 If you have one of the following DECstation Models you definitely
>> 382 want to choose R4xx0 for the CPU Type:
>> 383
>> 384 DECstation 5000/50
>> 385 DECstation 5000/150
>> 386 DECstation 5000/260
>> 387 DECsystem 5900/260
>> 388
>> 389 otherwise choose R3000.
>> 390
>> 391 config MACH_JAZZ
>> 392 bool "Jazz family of machines"
>> 393 select ARC_MEMORY
>> 394 select ARC_PROMLIB
>> 395 select ARCH_MIGHT_HAVE_PC_PARPORT
>> 396 select ARCH_MIGHT_HAVE_PC_SERIO
>> 397 select FW_ARC
>> 398 select FW_ARC32
>> 399 select ARCH_MAY_HAVE_PC_FDC
>> 400 select CEVT_R4K
>> 401 select CSRC_R4K
>> 402 select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
>> 403 select GENERIC_ISA_DMA
>> 404 select HAVE_PCSPKR_PLATFORM
>> 405 select IRQ_MIPS_CPU
>> 406 select I8253
>> 407 select I8259
>> 408 select ISA
>> 409 select SYS_HAS_CPU_R4X00
>> 410 select SYS_SUPPORTS_32BIT_KERNEL
>> 411 select SYS_SUPPORTS_64BIT_KERNEL
>> 412 select SYS_SUPPORTS_100HZ
>> 413 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 414 help
>> 415 This a family of machines based on the MIPS R4030 chipset which was
>> 416 used by several vendors to build RISC/os and Windows NT workstations.
>> 417 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
>> 418 Olivetti M700-10 workstations.
>> 419
>> 420 config MACH_INGENIC_SOC
>> 421 bool "Ingenic SoC based machines"
>> 422 select MIPS_GENERIC
>> 423 select MACH_INGENIC
>> 424 select MACH_GENERIC_CORE
>> 425 select SYS_SUPPORTS_ZBOOT_UART16550
>> 426 select CPU_SUPPORTS_CPUFREQ
>> 427 select MIPS_EXTERNAL_TIMER
>> 428
>> 429 config LANTIQ
>> 430 bool "Lantiq based platforms"
>> 431 select DMA_NONCOHERENT
>> 432 select IRQ_MIPS_CPU
>> 433 select CEVT_R4K
>> 434 select CSRC_R4K
>> 435 select NO_EXCEPT_FILL
>> 436 select SYS_HAS_CPU_MIPS32_R1
>> 437 select SYS_HAS_CPU_MIPS32_R2
>> 438 select SYS_SUPPORTS_BIG_ENDIAN
>> 439 select SYS_SUPPORTS_32BIT_KERNEL
>> 440 select SYS_SUPPORTS_MIPS16
>> 441 select SYS_SUPPORTS_MULTITHREADING
>> 442 select SYS_SUPPORTS_VPE_LOADER
>> 443 select SYS_HAS_EARLY_PRINTK
>> 444 select GPIOLIB
>> 445 select SWAP_IO_SPACE
>> 446 select BOOT_RAW
>> 447 select HAVE_LEGACY_CLK
>> 448 select USE_OF
>> 449 select PINCTRL
>> 450 select PINCTRL_LANTIQ
>> 451 select ARCH_HAS_RESET_CONTROLLER
>> 452 select RESET_CONTROLLER
>> 453
>> 454 config MACH_LOONGSON32
>> 455 bool "Loongson 32-bit family of machines"
>> 456 select SYS_SUPPORTS_ZBOOT
>> 457 help
>> 458 This enables support for the Loongson-1 family of machines.
>> 459
>> 460 Loongson-1 is a family of 32-bit MIPS-compatible SoCs developed by
>> 461 the Institute of Computing Technology (ICT), Chinese Academy of
>> 462 Sciences (CAS).
>> 463
>> 464 config MACH_LOONGSON2EF
>> 465 bool "Loongson-2E/F family of machines"
>> 466 select SYS_SUPPORTS_ZBOOT
>> 467 help
>> 468 This enables the support of early Loongson-2E/F family of machines.
>> 469
>> 470 config MACH_LOONGSON64
>> 471 bool "Loongson 64-bit family of machines"
>> 472 select ARCH_DMA_DEFAULT_COHERENT
>> 473 select ARCH_SPARSEMEM_ENABLE
>> 474 select ARCH_MIGHT_HAVE_PC_PARPORT
>> 475 select ARCH_MIGHT_HAVE_PC_SERIO
>> 476 select GENERIC_ISA_DMA_SUPPORT_BROKEN
>> 477 select BOOT_ELF32
>> 478 select BOARD_SCACHE
>> 479 select CSRC_R4K
>> 480 select CEVT_R4K
>> 481 select SYNC_R4K
>> 482 select FORCE_PCI
>> 483 select ISA
>> 484 select I8259
>> 485 select IRQ_MIPS_CPU
>> 486 select NO_EXCEPT_FILL
>> 487 select NR_CPUS_DEFAULT_64
>> 488 select USE_GENERIC_EARLY_PRINTK_8250
>> 489 select PCI_DRIVERS_GENERIC
>> 490 select SYS_HAS_CPU_LOONGSON64
>> 491 select SYS_HAS_EARLY_PRINTK
>> 492 select SYS_SUPPORTS_SMP
>> 493 select SYS_SUPPORTS_HOTPLUG_CPU
>> 494 select SYS_SUPPORTS_NUMA
>> 495 select SYS_SUPPORTS_64BIT_KERNEL
>> 496 select SYS_SUPPORTS_HIGHMEM
>> 497 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 498 select SYS_SUPPORTS_ZBOOT
>> 499 select SYS_SUPPORTS_RELOCATABLE
>> 500 select ZONE_DMA32
>> 501 select COMMON_CLK
>> 502 select USE_OF
>> 503 select BUILTIN_DTB
>> 504 select PCI_HOST_GENERIC
>> 505 help
>> 506 This enables the support of Loongson-2/3 family of machines.
>> 507
>> 508 Loongson-2 and Loongson-3 are 64-bit general-purpose processors with
>> 509 GS264/GS464/GS464E/GS464V microarchitecture (except old Loongson-2E
>> 510 and Loongson-2F which will be removed), developed by the Institute
>> 511 of Computing Technology (ICT), Chinese Academy of Sciences (CAS).
>> 512
>> 513 config MIPS_MALTA
>> 514 bool "MIPS Malta board"
>> 515 select ARCH_MAY_HAVE_PC_FDC
>> 516 select ARCH_MIGHT_HAVE_PC_PARPORT
>> 517 select ARCH_MIGHT_HAVE_PC_SERIO
>> 518 select BOOT_ELF32
>> 519 select BOOT_RAW
>> 520 select BUILTIN_DTB
>> 521 select CEVT_R4K
>> 522 select CLKSRC_MIPS_GIC
>> 523 select COMMON_CLK
>> 524 select CSRC_R4K
>> 525 select DMA_NONCOHERENT
>> 526 select GENERIC_ISA_DMA
>> 527 select HAVE_PCSPKR_PLATFORM
>> 528 select HAVE_PCI
>> 529 select I8253
>> 530 select I8259
>> 531 select IRQ_MIPS_CPU
>> 532 select MIPS_BONITO64
>> 533 select MIPS_CPU_SCACHE
>> 534 select MIPS_GIC
>> 535 select MIPS_L1_CACHE_SHIFT_6
>> 536 select MIPS_MSC
>> 537 select PCI_GT64XXX_PCI0
>> 538 select SMP_UP if SMP
>> 539 select SWAP_IO_SPACE
>> 540 select SYS_HAS_CPU_MIPS32_R1
>> 541 select SYS_HAS_CPU_MIPS32_R2
>> 542 select SYS_HAS_CPU_MIPS32_R3_5
>> 543 select SYS_HAS_CPU_MIPS32_R5
>> 544 select SYS_HAS_CPU_MIPS32_R6
>> 545 select SYS_HAS_CPU_MIPS64_R1
>> 546 select SYS_HAS_CPU_MIPS64_R2
>> 547 select SYS_HAS_CPU_MIPS64_R6
>> 548 select SYS_HAS_CPU_NEVADA
>> 549 select SYS_HAS_CPU_RM7000
>> 550 select SYS_SUPPORTS_32BIT_KERNEL
>> 551 select SYS_SUPPORTS_64BIT_KERNEL
>> 552 select SYS_SUPPORTS_BIG_ENDIAN
>> 553 select SYS_SUPPORTS_HIGHMEM
>> 554 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 555 select SYS_SUPPORTS_MICROMIPS
>> 556 select SYS_SUPPORTS_MIPS16
>> 557 select SYS_SUPPORTS_MIPS_CPS
>> 558 select SYS_SUPPORTS_MULTITHREADING
>> 559 select SYS_SUPPORTS_RELOCATABLE
>> 560 select SYS_SUPPORTS_SMARTMIPS
>> 561 select SYS_SUPPORTS_VPE_LOADER
>> 562 select SYS_SUPPORTS_ZBOOT
>> 563 select USE_OF
>> 564 select WAR_ICACHE_REFILLS
>> 565 select ZONE_DMA32 if 64BIT
>> 566 help
>> 567 This enables support for the MIPS Technologies Malta evaluation
>> 568 board.
>> 569
>> 570 config MACH_PIC32
>> 571 bool "Microchip PIC32 Family"
>> 572 help
>> 573 This enables support for the Microchip PIC32 family of platforms.
>> 574
>> 575 Microchip PIC32 is a family of general-purpose 32 bit MIPS core
>> 576 microcontrollers.
>> 577
>> 578 config EYEQ
>> 579 bool "Mobileye EyeQ SoC"
>> 580 select MACH_GENERIC_CORE
>> 581 select ARM_AMBA
>> 582 select PHYSICAL_START_BOOL
>> 583 select ARCH_SPARSEMEM_DEFAULT if 64BIT
>> 584 select BOOT_RAW
>> 585 select BUILTIN_DTB
>> 586 select CEVT_R4K
>> 587 select CLKSRC_MIPS_GIC
>> 588 select COMMON_CLK
>> 589 select CPU_MIPSR2_IRQ_EI
>> 590 select CPU_MIPSR2_IRQ_VI
>> 591 select CSRC_R4K
>> 592 select DMA_NONCOHERENT
>> 593 select HAVE_PCI
>> 594 select IRQ_MIPS_CPU
>> 595 select MIPS_AUTO_PFN_OFFSET
>> 596 select MIPS_CPU_SCACHE
>> 597 select MIPS_GIC
>> 598 select MIPS_L1_CACHE_SHIFT_7
>> 599 select PCI_DRIVERS_GENERIC
>> 600 select SMP_UP if SMP
>> 601 select SWAP_IO_SPACE
>> 602 select SYS_HAS_CPU_MIPS64_R6
>> 603 select SYS_SUPPORTS_64BIT_KERNEL
>> 604 select SYS_SUPPORTS_HIGHMEM
>> 605 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 606 select SYS_SUPPORTS_MIPS_CPS
>> 607 select SYS_SUPPORTS_RELOCATABLE
>> 608 select SYS_SUPPORTS_ZBOOT
>> 609 select UHI_BOOT
>> 610 select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
>> 611 select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
>> 612 select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
>> 613 select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
>> 614 select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
>> 615 select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
>> 616 select USE_OF
>> 617 help
>> 618 Select this to build a kernel supporting EyeQ SoC from Mobileye.
>> 619
50 bool 620 bool
51 621
>> 622 config MACH_NINTENDO64
>> 623 bool "Nintendo 64 console"
>> 624 select CEVT_R4K
>> 625 select CSRC_R4K
>> 626 select SYS_HAS_CPU_R4300
>> 627 select SYS_SUPPORTS_BIG_ENDIAN
>> 628 select SYS_SUPPORTS_ZBOOT
>> 629 select SYS_SUPPORTS_32BIT_KERNEL
>> 630 select SYS_SUPPORTS_64BIT_KERNEL
>> 631 select DMA_NONCOHERENT
>> 632 select IRQ_MIPS_CPU
>> 633
>> 634 config RALINK
>> 635 bool "Ralink based machines"
>> 636 select CEVT_R4K
>> 637 select COMMON_CLK
>> 638 select CSRC_R4K
>> 639 select BOOT_RAW
>> 640 select DMA_NONCOHERENT
>> 641 select IRQ_MIPS_CPU
>> 642 select USE_OF
>> 643 select SYS_HAS_CPU_MIPS32_R2
>> 644 select SYS_SUPPORTS_32BIT_KERNEL
>> 645 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 646 select SYS_SUPPORTS_MIPS16
>> 647 select SYS_SUPPORTS_ZBOOT
>> 648 select SYS_HAS_EARLY_PRINTK
>> 649 select ARCH_HAS_RESET_CONTROLLER
>> 650 select RESET_CONTROLLER
>> 651
>> 652 config MACH_REALTEK_RTL
>> 653 bool "Realtek RTL838x/RTL839x based machines"
>> 654 select MIPS_GENERIC
>> 655 select MACH_GENERIC_CORE
>> 656 select DMA_NONCOHERENT
>> 657 select IRQ_MIPS_CPU
>> 658 select CSRC_R4K
>> 659 select CEVT_R4K
>> 660 select SYS_HAS_CPU_MIPS32_R1
>> 661 select SYS_HAS_CPU_MIPS32_R2
>> 662 select SYS_SUPPORTS_BIG_ENDIAN
>> 663 select SYS_SUPPORTS_32BIT_KERNEL
>> 664 select SYS_SUPPORTS_MIPS16
>> 665 select SYS_SUPPORTS_MULTITHREADING
>> 666 select SYS_SUPPORTS_VPE_LOADER
>> 667 select BOOT_RAW
>> 668 select PINCTRL
>> 669 select USE_OF
>> 670 select REALTEK_OTTO_TIMER
>> 671
>> 672 config SGI_IP22
>> 673 bool "SGI IP22 (Indy/Indigo2)"
>> 674 select ARC_MEMORY
>> 675 select ARC_PROMLIB
>> 676 select FW_ARC
>> 677 select FW_ARC32
>> 678 select ARCH_MIGHT_HAVE_PC_SERIO
>> 679 select BOOT_ELF32
>> 680 select CEVT_R4K
>> 681 select CSRC_R4K
>> 682 select DEFAULT_SGI_PARTITION
>> 683 select DMA_NONCOHERENT
>> 684 select HAVE_EISA
>> 685 select I8253
>> 686 select I8259
>> 687 select IP22_CPU_SCACHE
>> 688 select IRQ_MIPS_CPU
>> 689 select GENERIC_ISA_DMA_SUPPORT_BROKEN
>> 690 select SGI_HAS_I8042
>> 691 select SGI_HAS_INDYDOG
>> 692 select SGI_HAS_HAL2
>> 693 select SGI_HAS_SEEQ
>> 694 select SGI_HAS_WD93
>> 695 select SGI_HAS_ZILOG
>> 696 select SWAP_IO_SPACE
>> 697 select SYS_HAS_CPU_R4X00
>> 698 select SYS_HAS_CPU_R5000
>> 699 select SYS_HAS_EARLY_PRINTK
>> 700 select SYS_SUPPORTS_32BIT_KERNEL
>> 701 select SYS_SUPPORTS_64BIT_KERNEL
>> 702 select SYS_SUPPORTS_BIG_ENDIAN
>> 703 select WAR_R4600_V1_INDEX_ICACHEOP
>> 704 select WAR_R4600_V1_HIT_CACHEOP
>> 705 select WAR_R4600_V2_HIT_CACHEOP
>> 706 select MIPS_L1_CACHE_SHIFT_7
>> 707 help
>> 708 This are the SGI Indy, Challenge S and Indigo2, as well as certain
>> 709 OEM variants like the Tandem CMN B006S. To compile a Linux kernel
>> 710 that runs on these, say Y here.
>> 711
>> 712 config SGI_IP27
>> 713 bool "SGI IP27 (Origin200/2000)"
>> 714 select ARCH_HAS_PHYS_TO_DMA
>> 715 select ARCH_SPARSEMEM_ENABLE
>> 716 select FW_ARC
>> 717 select FW_ARC64
>> 718 select ARC_CMDLINE_ONLY
>> 719 select BOOT_ELF64
>> 720 select DEFAULT_SGI_PARTITION
>> 721 select FORCE_PCI
>> 722 select SYS_HAS_EARLY_PRINTK
>> 723 select HAVE_PCI
>> 724 select IRQ_MIPS_CPU
>> 725 select IRQ_DOMAIN_HIERARCHY
>> 726 select NR_CPUS_DEFAULT_64
>> 727 select PCI_DRIVERS_GENERIC
>> 728 select PCI_XTALK_BRIDGE
>> 729 select SYS_HAS_CPU_R10000
>> 730 select SYS_SUPPORTS_64BIT_KERNEL
>> 731 select SYS_SUPPORTS_BIG_ENDIAN
>> 732 select SYS_SUPPORTS_NUMA
>> 733 select SYS_SUPPORTS_SMP
>> 734 select WAR_R10000_LLSC
>> 735 select MIPS_L1_CACHE_SHIFT_7
>> 736 select NUMA
>> 737 help
>> 738 This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
>> 739 workstations. To compile a Linux kernel that runs on these, say Y
>> 740 here.
>> 741
>> 742 config SGI_IP28
>> 743 bool "SGI IP28 (Indigo2 R10k)"
>> 744 select ARC_MEMORY
>> 745 select ARC_PROMLIB
>> 746 select FW_ARC
>> 747 select FW_ARC64
>> 748 select ARCH_MIGHT_HAVE_PC_SERIO
>> 749 select BOOT_ELF64
>> 750 select CEVT_R4K
>> 751 select CSRC_R4K
>> 752 select DEFAULT_SGI_PARTITION
>> 753 select DMA_NONCOHERENT
>> 754 select GENERIC_ISA_DMA_SUPPORT_BROKEN
>> 755 select IRQ_MIPS_CPU
>> 756 select HAVE_EISA
>> 757 select I8253
>> 758 select I8259
>> 759 select SGI_HAS_I8042
>> 760 select SGI_HAS_INDYDOG
>> 761 select SGI_HAS_HAL2
>> 762 select SGI_HAS_SEEQ
>> 763 select SGI_HAS_WD93
>> 764 select SGI_HAS_ZILOG
>> 765 select SWAP_IO_SPACE
>> 766 select SYS_HAS_CPU_R10000
>> 767 select SYS_HAS_EARLY_PRINTK
>> 768 select SYS_SUPPORTS_64BIT_KERNEL
>> 769 select SYS_SUPPORTS_BIG_ENDIAN
>> 770 select WAR_R10000_LLSC
>> 771 select MIPS_L1_CACHE_SHIFT_7
>> 772 help
>> 773 This is the SGI Indigo2 with R10000 processor. To compile a Linux
>> 774 kernel that runs on these, say Y here.
>> 775
>> 776 config SGI_IP30
>> 777 bool "SGI IP30 (Octane/Octane2)"
>> 778 select ARCH_HAS_PHYS_TO_DMA
>> 779 select FW_ARC
>> 780 select FW_ARC64
>> 781 select BOOT_ELF64
>> 782 select CEVT_R4K
>> 783 select CSRC_R4K
>> 784 select FORCE_PCI
>> 785 select SYNC_R4K if SMP
>> 786 select ZONE_DMA32
>> 787 select HAVE_PCI
>> 788 select IRQ_MIPS_CPU
>> 789 select IRQ_DOMAIN_HIERARCHY
>> 790 select PCI_DRIVERS_GENERIC
>> 791 select PCI_XTALK_BRIDGE
>> 792 select SYS_HAS_EARLY_PRINTK
>> 793 select SYS_HAS_CPU_R10000
>> 794 select SYS_SUPPORTS_64BIT_KERNEL
>> 795 select SYS_SUPPORTS_BIG_ENDIAN
>> 796 select SYS_SUPPORTS_SMP
>> 797 select WAR_R10000_LLSC
>> 798 select MIPS_L1_CACHE_SHIFT_7
>> 799 select ARC_MEMORY
>> 800 help
>> 801 These are the SGI Octane and Octane2 graphics workstations. To
>> 802 compile a Linux kernel that runs on these, say Y here.
>> 803
>> 804 config SGI_IP32
>> 805 bool "SGI IP32 (O2)"
>> 806 select ARC_MEMORY
>> 807 select ARC_PROMLIB
>> 808 select ARCH_HAS_PHYS_TO_DMA
>> 809 select FW_ARC
>> 810 select FW_ARC32
>> 811 select BOOT_ELF32
>> 812 select CEVT_R4K
>> 813 select CSRC_R4K
>> 814 select DMA_NONCOHERENT
>> 815 select HAVE_PCI
>> 816 select IRQ_MIPS_CPU
>> 817 select R5000_CPU_SCACHE
>> 818 select RM7000_CPU_SCACHE
>> 819 select SYS_HAS_CPU_R5000
>> 820 select SYS_HAS_CPU_R10000 if BROKEN
>> 821 select SYS_HAS_CPU_RM7000
>> 822 select SYS_HAS_CPU_NEVADA
>> 823 select SYS_SUPPORTS_64BIT_KERNEL
>> 824 select SYS_SUPPORTS_BIG_ENDIAN
>> 825 select WAR_ICACHE_REFILLS
>> 826 help
>> 827 If you want this kernel to run on SGI O2 workstation, say Y here.
>> 828
>> 829 config SIBYTE_CRHONE
>> 830 bool "Sibyte BCM91125C-CRhone"
>> 831 select BOOT_ELF32
>> 832 select SIBYTE_BCM1125
>> 833 select SWAP_IO_SPACE
>> 834 select SYS_HAS_CPU_SB1
>> 835 select SYS_SUPPORTS_BIG_ENDIAN
>> 836 select SYS_SUPPORTS_HIGHMEM
>> 837 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 838
>> 839 config SIBYTE_RHONE
>> 840 bool "Sibyte BCM91125E-Rhone"
>> 841 select BOOT_ELF32
>> 842 select SIBYTE_SB1250
>> 843 select SWAP_IO_SPACE
>> 844 select SYS_HAS_CPU_SB1
>> 845 select SYS_SUPPORTS_BIG_ENDIAN
>> 846 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 847
>> 848 config SIBYTE_SWARM
>> 849 bool "Sibyte BCM91250A-SWARM"
>> 850 select BOOT_ELF32
>> 851 select HAVE_PATA_PLATFORM
>> 852 select SIBYTE_SB1250
>> 853 select SWAP_IO_SPACE
>> 854 select SYS_HAS_CPU_SB1
>> 855 select SYS_SUPPORTS_BIG_ENDIAN
>> 856 select SYS_SUPPORTS_HIGHMEM
>> 857 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 858 select ZONE_DMA32 if 64BIT
>> 859 select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
>> 860
>> 861 config SIBYTE_LITTLESUR
>> 862 bool "Sibyte BCM91250C2-LittleSur"
>> 863 select BOOT_ELF32
>> 864 select HAVE_PATA_PLATFORM
>> 865 select SIBYTE_SB1250
>> 866 select SWAP_IO_SPACE
>> 867 select SYS_HAS_CPU_SB1
>> 868 select SYS_SUPPORTS_BIG_ENDIAN
>> 869 select SYS_SUPPORTS_HIGHMEM
>> 870 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 871 select ZONE_DMA32 if 64BIT
>> 872
>> 873 config SIBYTE_SENTOSA
>> 874 bool "Sibyte BCM91250E-Sentosa"
>> 875 select BOOT_ELF32
>> 876 select SIBYTE_SB1250
>> 877 select SWAP_IO_SPACE
>> 878 select SYS_HAS_CPU_SB1
>> 879 select SYS_SUPPORTS_BIG_ENDIAN
>> 880 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 881 select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
>> 882
>> 883 config SIBYTE_BIGSUR
>> 884 bool "Sibyte BCM91480B-BigSur"
>> 885 select BOOT_ELF32
>> 886 select NR_CPUS_DEFAULT_4
>> 887 select SIBYTE_BCM1x80
>> 888 select SWAP_IO_SPACE
>> 889 select SYS_HAS_CPU_SB1
>> 890 select SYS_SUPPORTS_BIG_ENDIAN
>> 891 select SYS_SUPPORTS_HIGHMEM
>> 892 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 893 select ZONE_DMA32 if 64BIT
>> 894 select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
>> 895
>> 896 config SNI_RM
>> 897 bool "SNI RM200/300/400"
>> 898 select ARC_MEMORY
>> 899 select ARC_PROMLIB
>> 900 select FW_ARC if CPU_LITTLE_ENDIAN
>> 901 select FW_ARC32 if CPU_LITTLE_ENDIAN
>> 902 select FW_SNIPROM if CPU_BIG_ENDIAN
>> 903 select ARCH_MAY_HAVE_PC_FDC
>> 904 select ARCH_MIGHT_HAVE_PC_PARPORT
>> 905 select ARCH_MIGHT_HAVE_PC_SERIO
>> 906 select BOOT_ELF32
>> 907 select CEVT_R4K
>> 908 select CSRC_R4K
>> 909 select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
>> 910 select DMA_NONCOHERENT
>> 911 select GENERIC_ISA_DMA
>> 912 select HAVE_EISA
>> 913 select HAVE_PCSPKR_PLATFORM
>> 914 select HAVE_PCI
>> 915 select IRQ_MIPS_CPU
>> 916 select I8253
>> 917 select I8259
>> 918 select ISA
>> 919 select MIPS_L1_CACHE_SHIFT_6
>> 920 select SWAP_IO_SPACE if CPU_BIG_ENDIAN
>> 921 select SYS_HAS_CPU_R4X00
>> 922 select SYS_HAS_CPU_R5000
>> 923 select SYS_HAS_CPU_R10000
>> 924 select R5000_CPU_SCACHE
>> 925 select SYS_HAS_EARLY_PRINTK
>> 926 select SYS_SUPPORTS_32BIT_KERNEL
>> 927 select SYS_SUPPORTS_64BIT_KERNEL
>> 928 select SYS_SUPPORTS_BIG_ENDIAN
>> 929 select SYS_SUPPORTS_HIGHMEM
>> 930 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 931 select WAR_R4600_V2_HIT_CACHEOP
>> 932 help
>> 933 The SNI RM200/300/400 are MIPS-based machines manufactured by
>> 934 Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
>> 935 Technology and now in turn merged with Fujitsu. Say Y here to
>> 936 support this machine type.
>> 937
>> 938 config MACH_TX49XX
>> 939 bool "Toshiba TX49 series based machines"
>> 940 select WAR_TX49XX_ICACHE_INDEX_INV
>> 941
>> 942 config MIKROTIK_RB532
>> 943 bool "Mikrotik RB532 boards"
>> 944 select CEVT_R4K
>> 945 select CSRC_R4K
>> 946 select DMA_NONCOHERENT
>> 947 select HAVE_PCI
>> 948 select IRQ_MIPS_CPU
>> 949 select SYS_HAS_CPU_MIPS32_R1
>> 950 select SYS_SUPPORTS_32BIT_KERNEL
>> 951 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 952 select SWAP_IO_SPACE
>> 953 select BOOT_RAW
>> 954 select GPIOLIB
>> 955 select MIPS_L1_CACHE_SHIFT_4
>> 956 help
>> 957 Support the Mikrotik(tm) RouterBoard 532 series,
>> 958 based on the IDT RC32434 SoC.
>> 959
>> 960 config CAVIUM_OCTEON_SOC
>> 961 bool "Cavium Networks Octeon SoC based boards"
>> 962 select CEVT_R4K
>> 963 select ARCH_HAS_PHYS_TO_DMA
>> 964 select HAVE_RAPIDIO
>> 965 select PHYS_ADDR_T_64BIT
>> 966 select SYS_SUPPORTS_64BIT_KERNEL
>> 967 select SYS_SUPPORTS_BIG_ENDIAN
>> 968 select EDAC_SUPPORT
>> 969 select EDAC_ATOMIC_SCRUB
>> 970 select SYS_SUPPORTS_LITTLE_ENDIAN
>> 971 select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
>> 972 select SYS_HAS_EARLY_PRINTK
>> 973 select SYS_HAS_CPU_CAVIUM_OCTEON
>> 974 select HAVE_PCI
>> 975 select HAVE_PLAT_DELAY
>> 976 select HAVE_PLAT_FW_INIT_CMDLINE
>> 977 select HAVE_PLAT_MEMCPY
>> 978 select ZONE_DMA32
>> 979 select GPIOLIB
>> 980 select USE_OF
>> 981 select ARCH_SPARSEMEM_ENABLE
>> 982 select SYS_SUPPORTS_SMP
>> 983 select NR_CPUS_DEFAULT_64
>> 984 select MIPS_NR_CPU_NR_MAP_1024
>> 985 select BUILTIN_DTB
>> 986 select MTD
>> 987 select MTD_COMPLEX_MAPPINGS
>> 988 select SWIOTLB
>> 989 select SYS_SUPPORTS_RELOCATABLE
>> 990 help
>> 991 This option supports all of the Octeon reference boards from Cavium
>> 992 Networks. It builds a kernel that dynamically determines the Octeon
>> 993 CPU type and supports all known board reference implementations.
>> 994 Some of the supported boards are:
>> 995 EBT3000
>> 996 EBH3000
>> 997 EBH3100
>> 998 Thunder
>> 999 Kodama
>> 1000 Hikari
>> 1001 Say Y here for most Octeon reference boards.
>> 1002
>> 1003 endchoice
>> 1004
>> 1005 config FIT_IMAGE_FDT_EPM5
>> 1006 bool "Include FDT for Mobileye EyeQ5 development platforms"
>> 1007 depends on MACH_EYEQ5
>> 1008 default n
>> 1009 help
>> 1010 Enable this to include the FDT for the EyeQ5 development platforms
>> 1011 from Mobileye in the FIT kernel image.
>> 1012 This requires u-boot on the platform.
>> 1013
>> 1014 source "arch/mips/alchemy/Kconfig"
>> 1015 source "arch/mips/ath25/Kconfig"
>> 1016 source "arch/mips/ath79/Kconfig"
>> 1017 source "arch/mips/bcm47xx/Kconfig"
>> 1018 source "arch/mips/bcm63xx/Kconfig"
>> 1019 source "arch/mips/bmips/Kconfig"
>> 1020 source "arch/mips/generic/Kconfig"
>> 1021 source "arch/mips/ingenic/Kconfig"
>> 1022 source "arch/mips/jazz/Kconfig"
>> 1023 source "arch/mips/lantiq/Kconfig"
>> 1024 source "arch/mips/mobileye/Kconfig"
>> 1025 source "arch/mips/pic32/Kconfig"
>> 1026 source "arch/mips/ralink/Kconfig"
>> 1027 source "arch/mips/sgi-ip27/Kconfig"
>> 1028 source "arch/mips/sibyte/Kconfig"
>> 1029 source "arch/mips/txx9/Kconfig"
>> 1030 source "arch/mips/cavium-octeon/Kconfig"
>> 1031 source "arch/mips/loongson2ef/Kconfig"
>> 1032 source "arch/mips/loongson32/Kconfig"
>> 1033 source "arch/mips/loongson64/Kconfig"
>> 1034
>> 1035 endmenu
>> 1036
52 config GENERIC_HWEIGHT 1037 config GENERIC_HWEIGHT
53 bool 1038 bool
54 default y 1039 default y
55 1040
56 config GENERIC_CALIBRATE_DELAY 1041 config GENERIC_CALIBRATE_DELAY
57 bool 1042 bool
58 default y 1043 default y
59 1044
>> 1045 config SCHED_OMIT_FRAME_POINTER
>> 1046 bool
>> 1047 default y
>> 1048
>> 1049 #
>> 1050 # Select some configuration options automatically based on user selections.
>> 1051 #
>> 1052 config FW_ARC
>> 1053 bool
>> 1054
>> 1055 config ARCH_MAY_HAVE_PC_FDC
>> 1056 bool
>> 1057
>> 1058 config BOOT_RAW
>> 1059 bool
>> 1060
>> 1061 config CEVT_BCM1480
>> 1062 bool
>> 1063
>> 1064 config CEVT_DS1287
>> 1065 bool
>> 1066
>> 1067 config CEVT_GT641XX
>> 1068 bool
>> 1069
>> 1070 config CEVT_R4K
>> 1071 bool
>> 1072
>> 1073 config CEVT_SB1250
>> 1074 bool
>> 1075
>> 1076 config CEVT_TXX9
>> 1077 bool
>> 1078
>> 1079 config CSRC_BCM1480
>> 1080 bool
>> 1081
>> 1082 config CSRC_IOASIC
>> 1083 bool
>> 1084
>> 1085 config CSRC_R4K
>> 1086 select CLOCKSOURCE_WATCHDOG if CPU_FREQ
>> 1087 select HAVE_UNSTABLE_SCHED_CLOCK if SMP && 64BIT
>> 1088 bool
>> 1089
>> 1090 config CSRC_SB1250
>> 1091 bool
>> 1092
>> 1093 config MIPS_CLOCK_VSYSCALL
>> 1094 def_bool CSRC_R4K || CLKSRC_MIPS_GIC
>> 1095
>> 1096 config GPIO_TXX9
>> 1097 select GPIOLIB
>> 1098 bool
>> 1099
>> 1100 config FW_CFE
>> 1101 bool
>> 1102
>> 1103 config ARCH_SUPPORTS_UPROBES
>> 1104 def_bool y
>> 1105
>> 1106 config DMA_NONCOHERENT
>> 1107 bool
>> 1108 #
>> 1109 # MIPS allows mixing "slightly different" Cacheability and Coherency
>> 1110 # Attribute bits. It is believed that the uncached access through
>> 1111 # KSEG1 and the implementation specific "uncached accelerated" used
>> 1112 # by pgprot_writcombine can be mixed, and the latter sometimes provides
>> 1113 # significant advantages.
>> 1114 #
>> 1115 select ARCH_HAS_SETUP_DMA_OPS
>> 1116 select ARCH_HAS_DMA_WRITE_COMBINE
>> 1117 select ARCH_HAS_DMA_PREP_COHERENT
>> 1118 select ARCH_HAS_SYNC_DMA_FOR_CPU
>> 1119 select ARCH_HAS_SYNC_DMA_FOR_DEVICE
>> 1120 select ARCH_HAS_DMA_SET_UNCACHED
>> 1121 select DMA_NONCOHERENT_MMAP
>> 1122 select NEED_DMA_MAP_STATE
>> 1123
>> 1124 config SYS_HAS_EARLY_PRINTK
>> 1125 bool
>> 1126
>> 1127 config SYS_SUPPORTS_HOTPLUG_CPU
>> 1128 bool
>> 1129
>> 1130 config MIPS_BONITO64
>> 1131 bool
>> 1132
>> 1133 config MIPS_MSC
>> 1134 bool
>> 1135
>> 1136 config SYNC_R4K
>> 1137 bool
>> 1138
>> 1139 config NO_IOPORT_MAP
>> 1140 def_bool n
>> 1141
60 config GENERIC_CSUM 1142 config GENERIC_CSUM
>> 1143 def_bool CPU_NO_LOAD_STORE_LR
>> 1144
>> 1145 config GENERIC_ISA_DMA
>> 1146 bool
>> 1147 select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n
>> 1148 select ISA_DMA_API
>> 1149
>> 1150 config GENERIC_ISA_DMA_SUPPORT_BROKEN
>> 1151 bool
>> 1152 select GENERIC_ISA_DMA
>> 1153
>> 1154 config HAVE_PLAT_DELAY
>> 1155 bool
>> 1156
>> 1157 config HAVE_PLAT_FW_INIT_CMDLINE
>> 1158 bool
>> 1159
>> 1160 config HAVE_PLAT_MEMCPY
>> 1161 bool
>> 1162
>> 1163 config ISA_DMA_API
>> 1164 bool
>> 1165
>> 1166 config SYS_SUPPORTS_RELOCATABLE
>> 1167 bool
>> 1168 help
>> 1169 Selected if the platform supports relocating the kernel.
>> 1170 The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
>> 1171 to allow access to command line and entropy sources.
>> 1172
>> 1173 #
>> 1174 # Endianness selection. Sufficiently obscure so many users don't know what to
>> 1175 # answer,so we try hard to limit the available choices. Also the use of a
>> 1176 # choice statement should be more obvious to the user.
>> 1177 #
>> 1178 choice
>> 1179 prompt "Endianness selection"
>> 1180 help
>> 1181 Some MIPS machines can be configured for either little or big endian
>> 1182 byte order. These modes require different kernels and a different
>> 1183 Linux distribution. In general there is one preferred byteorder for a
>> 1184 particular system but some systems are just as commonly used in the
>> 1185 one or the other endianness.
>> 1186
>> 1187 config CPU_BIG_ENDIAN
>> 1188 bool "Big endian"
>> 1189 depends on SYS_SUPPORTS_BIG_ENDIAN
>> 1190
>> 1191 config CPU_LITTLE_ENDIAN
>> 1192 bool "Little endian"
>> 1193 depends on SYS_SUPPORTS_LITTLE_ENDIAN
>> 1194
>> 1195 endchoice
>> 1196
>> 1197 config EXPORT_UASM
>> 1198 bool
>> 1199
>> 1200 config SYS_SUPPORTS_APM_EMULATION
>> 1201 bool
>> 1202
>> 1203 config SYS_SUPPORTS_BIG_ENDIAN
>> 1204 bool
>> 1205
>> 1206 config SYS_SUPPORTS_LITTLE_ENDIAN
>> 1207 bool
>> 1208
>> 1209 config MIPS_HUGE_TLB_SUPPORT
>> 1210 def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE
>> 1211
>> 1212 config IRQ_TXX9
>> 1213 bool
>> 1214
>> 1215 config IRQ_GT641XX
>> 1216 bool
>> 1217
>> 1218 config PCI_GT64XXX_PCI0
>> 1219 bool
>> 1220
>> 1221 config PCI_XTALK_BRIDGE
>> 1222 bool
>> 1223
>> 1224 config NO_EXCEPT_FILL
>> 1225 bool
>> 1226
>> 1227 config MIPS_SPRAM
>> 1228 bool
>> 1229
>> 1230 config SWAP_IO_SPACE
>> 1231 bool
>> 1232
>> 1233 config SGI_HAS_INDYDOG
>> 1234 bool
>> 1235
>> 1236 config SGI_HAS_HAL2
>> 1237 bool
>> 1238
>> 1239 config SGI_HAS_SEEQ
>> 1240 bool
>> 1241
>> 1242 config SGI_HAS_WD93
>> 1243 bool
>> 1244
>> 1245 config SGI_HAS_ZILOG
>> 1246 bool
>> 1247
>> 1248 config SGI_HAS_I8042
>> 1249 bool
>> 1250
>> 1251 config DEFAULT_SGI_PARTITION
>> 1252 bool
>> 1253
>> 1254 config FW_ARC32
>> 1255 bool
>> 1256
>> 1257 config FW_SNIPROM
>> 1258 bool
>> 1259
>> 1260 config BOOT_ELF32
>> 1261 bool
>> 1262
>> 1263 config MIPS_L1_CACHE_SHIFT_4
>> 1264 bool
>> 1265
>> 1266 config MIPS_L1_CACHE_SHIFT_5
>> 1267 bool
>> 1268
>> 1269 config MIPS_L1_CACHE_SHIFT_6
>> 1270 bool
>> 1271
>> 1272 config MIPS_L1_CACHE_SHIFT_7
>> 1273 bool
>> 1274
>> 1275 config MIPS_L1_CACHE_SHIFT
>> 1276 int
>> 1277 default "7" if MIPS_L1_CACHE_SHIFT_7
>> 1278 default "6" if MIPS_L1_CACHE_SHIFT_6
>> 1279 default "5" if MIPS_L1_CACHE_SHIFT_5
>> 1280 default "4" if MIPS_L1_CACHE_SHIFT_4
>> 1281 default "5"
>> 1282
>> 1283 config ARC_CMDLINE_ONLY
>> 1284 bool
>> 1285
>> 1286 config ARC_CONSOLE
>> 1287 bool "ARC console support"
>> 1288 depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN)
>> 1289
>> 1290 config ARC_MEMORY
>> 1291 bool
>> 1292
>> 1293 config ARC_PROMLIB
>> 1294 bool
>> 1295
>> 1296 config FW_ARC64
>> 1297 bool
>> 1298
>> 1299 config BOOT_ELF64
>> 1300 bool
>> 1301
>> 1302 menu "CPU selection"
>> 1303
>> 1304 choice
>> 1305 prompt "CPU type"
>> 1306 default CPU_R4X00
>> 1307
>> 1308 config CPU_LOONGSON64
>> 1309 bool "Loongson 64-bit CPU"
>> 1310 depends on SYS_HAS_CPU_LOONGSON64
>> 1311 select ARCH_HAS_PHYS_TO_DMA
>> 1312 select CPU_MIPSR2
>> 1313 select CPU_HAS_PREFETCH
>> 1314 select CPU_SUPPORTS_64BIT_KERNEL
>> 1315 select CPU_SUPPORTS_HIGHMEM
>> 1316 select CPU_SUPPORTS_HUGEPAGES
>> 1317 select CPU_SUPPORTS_MSA
>> 1318 select CPU_SUPPORTS_VZ
>> 1319 select CPU_DIEI_BROKEN if !LOONGSON3_ENHANCEMENT
>> 1320 select CPU_MIPSR2_IRQ_VI
>> 1321 select DMA_NONCOHERENT
>> 1322 select WEAK_ORDERING
>> 1323 select WEAK_REORDERING_BEYOND_LLSC
>> 1324 select MIPS_ASID_BITS_VARIABLE
>> 1325 select MIPS_PGD_C0_CONTEXT
>> 1326 select MIPS_L1_CACHE_SHIFT_6
>> 1327 select MIPS_FP_SUPPORT
>> 1328 select GPIOLIB
>> 1329 select SWIOTLB
>> 1330 help
>> 1331 The Loongson GSx64(GS264/GS464/GS464E/GS464V) series of processor
>> 1332 cores implements the MIPS64R2 instruction set with many extensions,
>> 1333 including most 64-bit Loongson-2 (2H, 2K) and Loongson-3 (3A1000,
>> 1334 3B1000, 3B1500, 3A2000, 3A3000 and 3A4000) processors. However, old
>> 1335 Loongson-2E/2F is not covered here and will be removed in future.
>> 1336
>> 1337 config CPU_LOONGSON2E
>> 1338 bool "Loongson 2E"
>> 1339 depends on SYS_HAS_CPU_LOONGSON2E
>> 1340 select CPU_LOONGSON2EF
>> 1341 help
>> 1342 The Loongson 2E processor implements the MIPS III instruction set
>> 1343 with many extensions.
>> 1344
>> 1345 It has an internal FPGA northbridge, which is compatible to
>> 1346 bonito64.
>> 1347
>> 1348 config CPU_LOONGSON2F
>> 1349 bool "Loongson 2F"
>> 1350 depends on SYS_HAS_CPU_LOONGSON2F
>> 1351 select CPU_LOONGSON2EF
>> 1352 help
>> 1353 The Loongson 2F processor implements the MIPS III instruction set
>> 1354 with many extensions.
>> 1355
>> 1356 Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller
>> 1357 have a similar programming interface with FPGA northbridge used in
>> 1358 Loongson2E.
>> 1359
>> 1360 config CPU_LOONGSON1B
>> 1361 bool "Loongson 1B"
>> 1362 depends on SYS_HAS_CPU_LOONGSON1B
>> 1363 select CPU_LOONGSON32
>> 1364 select LEDS_GPIO_REGISTER
>> 1365 help
>> 1366 The Loongson 1B is a 32-bit SoC, which implements the MIPS32
>> 1367 Release 1 instruction set and part of the MIPS32 Release 2
>> 1368 instruction set.
>> 1369
>> 1370 config CPU_LOONGSON1C
>> 1371 bool "Loongson 1C"
>> 1372 depends on SYS_HAS_CPU_LOONGSON1C
>> 1373 select CPU_LOONGSON32
>> 1374 select LEDS_GPIO_REGISTER
>> 1375 help
>> 1376 The Loongson 1C is a 32-bit SoC, which implements the MIPS32
>> 1377 Release 1 instruction set and part of the MIPS32 Release 2
>> 1378 instruction set.
>> 1379
>> 1380 config CPU_MIPS32_R1
>> 1381 bool "MIPS32 Release 1"
>> 1382 depends on SYS_HAS_CPU_MIPS32_R1
>> 1383 select CPU_HAS_PREFETCH
>> 1384 select CPU_SUPPORTS_32BIT_KERNEL
>> 1385 select CPU_SUPPORTS_HIGHMEM
>> 1386 help
>> 1387 Choose this option to build a kernel for release 1 or later of the
>> 1388 MIPS32 architecture. Most modern embedded systems with a 32-bit
>> 1389 MIPS processor are based on a MIPS32 processor. If you know the
>> 1390 specific type of processor in your system, choose those that one
>> 1391 otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
>> 1392 Release 2 of the MIPS32 architecture is available since several
>> 1393 years so chances are you even have a MIPS32 Release 2 processor
>> 1394 in which case you should choose CPU_MIPS32_R2 instead for better
>> 1395 performance.
>> 1396
>> 1397 config CPU_MIPS32_R2
>> 1398 bool "MIPS32 Release 2"
>> 1399 depends on SYS_HAS_CPU_MIPS32_R2
>> 1400 select CPU_HAS_PREFETCH
>> 1401 select CPU_SUPPORTS_32BIT_KERNEL
>> 1402 select CPU_SUPPORTS_HIGHMEM
>> 1403 select CPU_SUPPORTS_MSA
>> 1404 help
>> 1405 Choose this option to build a kernel for release 2 or later of the
>> 1406 MIPS32 architecture. Most modern embedded systems with a 32-bit
>> 1407 MIPS processor are based on a MIPS32 processor. If you know the
>> 1408 specific type of processor in your system, choose those that one
>> 1409 otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
>> 1410
>> 1411 config CPU_MIPS32_R5
>> 1412 bool "MIPS32 Release 5"
>> 1413 depends on SYS_HAS_CPU_MIPS32_R5
>> 1414 select CPU_HAS_PREFETCH
>> 1415 select CPU_SUPPORTS_32BIT_KERNEL
>> 1416 select CPU_SUPPORTS_HIGHMEM
>> 1417 select CPU_SUPPORTS_MSA
>> 1418 select CPU_SUPPORTS_VZ
>> 1419 select MIPS_O32_FP64_SUPPORT
>> 1420 help
>> 1421 Choose this option to build a kernel for release 5 or later of the
>> 1422 MIPS32 architecture. New MIPS processors, starting with the Warrior
>> 1423 family, are based on a MIPS32r5 processor. If you own an older
>> 1424 processor, you probably need to select MIPS32r1 or MIPS32r2 instead.
>> 1425
>> 1426 config CPU_MIPS32_R6
>> 1427 bool "MIPS32 Release 6"
>> 1428 depends on SYS_HAS_CPU_MIPS32_R6
>> 1429 select CPU_HAS_PREFETCH
>> 1430 select CPU_NO_LOAD_STORE_LR
>> 1431 select CPU_SUPPORTS_32BIT_KERNEL
>> 1432 select CPU_SUPPORTS_HIGHMEM
>> 1433 select CPU_SUPPORTS_MSA
>> 1434 select CPU_SUPPORTS_VZ
>> 1435 select MIPS_O32_FP64_SUPPORT
>> 1436 help
>> 1437 Choose this option to build a kernel for release 6 or later of the
>> 1438 MIPS32 architecture. New MIPS processors, starting with the Warrior
>> 1439 family, are based on a MIPS32r6 processor. If you own an older
>> 1440 processor, you probably need to select MIPS32r1 or MIPS32r2 instead.
>> 1441
>> 1442 config CPU_MIPS64_R1
>> 1443 bool "MIPS64 Release 1"
>> 1444 depends on SYS_HAS_CPU_MIPS64_R1
>> 1445 select CPU_HAS_PREFETCH
>> 1446 select CPU_SUPPORTS_32BIT_KERNEL
>> 1447 select CPU_SUPPORTS_64BIT_KERNEL
>> 1448 select CPU_SUPPORTS_HIGHMEM
>> 1449 select CPU_SUPPORTS_HUGEPAGES
>> 1450 help
>> 1451 Choose this option to build a kernel for release 1 or later of the
>> 1452 MIPS64 architecture. Many modern embedded systems with a 64-bit
>> 1453 MIPS processor are based on a MIPS64 processor. If you know the
>> 1454 specific type of processor in your system, choose those that one
>> 1455 otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
>> 1456 Release 2 of the MIPS64 architecture is available since several
>> 1457 years so chances are you even have a MIPS64 Release 2 processor
>> 1458 in which case you should choose CPU_MIPS64_R2 instead for better
>> 1459 performance.
>> 1460
>> 1461 config CPU_MIPS64_R2
>> 1462 bool "MIPS64 Release 2"
>> 1463 depends on SYS_HAS_CPU_MIPS64_R2
>> 1464 select CPU_HAS_PREFETCH
>> 1465 select CPU_SUPPORTS_32BIT_KERNEL
>> 1466 select CPU_SUPPORTS_64BIT_KERNEL
>> 1467 select CPU_SUPPORTS_HIGHMEM
>> 1468 select CPU_SUPPORTS_HUGEPAGES
>> 1469 select CPU_SUPPORTS_MSA
>> 1470 help
>> 1471 Choose this option to build a kernel for release 2 or later of the
>> 1472 MIPS64 architecture. Many modern embedded systems with a 64-bit
>> 1473 MIPS processor are based on a MIPS64 processor. If you know the
>> 1474 specific type of processor in your system, choose those that one
>> 1475 otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
>> 1476
>> 1477 config CPU_MIPS64_R5
>> 1478 bool "MIPS64 Release 5"
>> 1479 depends on SYS_HAS_CPU_MIPS64_R5
>> 1480 select CPU_HAS_PREFETCH
>> 1481 select CPU_SUPPORTS_32BIT_KERNEL
>> 1482 select CPU_SUPPORTS_64BIT_KERNEL
>> 1483 select CPU_SUPPORTS_HIGHMEM
>> 1484 select CPU_SUPPORTS_HUGEPAGES
>> 1485 select CPU_SUPPORTS_MSA
>> 1486 select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32
>> 1487 select CPU_SUPPORTS_VZ
>> 1488 help
>> 1489 Choose this option to build a kernel for release 5 or later of the
>> 1490 MIPS64 architecture. This is a intermediate MIPS architecture
>> 1491 release partly implementing release 6 features. Though there is no
>> 1492 any hardware known to be based on this release.
>> 1493
>> 1494 config CPU_MIPS64_R6
>> 1495 bool "MIPS64 Release 6"
>> 1496 depends on SYS_HAS_CPU_MIPS64_R6
>> 1497 select CPU_HAS_PREFETCH
>> 1498 select CPU_NO_LOAD_STORE_LR
>> 1499 select CPU_SUPPORTS_32BIT_KERNEL
>> 1500 select CPU_SUPPORTS_64BIT_KERNEL
>> 1501 select CPU_SUPPORTS_HIGHMEM
>> 1502 select CPU_SUPPORTS_HUGEPAGES
>> 1503 select CPU_SUPPORTS_MSA
>> 1504 select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32
>> 1505 select CPU_SUPPORTS_VZ
>> 1506 help
>> 1507 Choose this option to build a kernel for release 6 or later of the
>> 1508 MIPS64 architecture. New MIPS processors, starting with the Warrior
>> 1509 family, are based on a MIPS64r6 processor. If you own an older
>> 1510 processor, you probably need to select MIPS64r1 or MIPS64r2 instead.
>> 1511
>> 1512 config CPU_P5600
>> 1513 bool "MIPS Warrior P5600"
>> 1514 depends on SYS_HAS_CPU_P5600
>> 1515 select CPU_HAS_PREFETCH
>> 1516 select CPU_SUPPORTS_32BIT_KERNEL
>> 1517 select CPU_SUPPORTS_HIGHMEM
>> 1518 select CPU_SUPPORTS_MSA
>> 1519 select CPU_SUPPORTS_CPUFREQ
>> 1520 select CPU_SUPPORTS_VZ
>> 1521 select CPU_MIPSR2_IRQ_VI
>> 1522 select CPU_MIPSR2_IRQ_EI
>> 1523 select MIPS_O32_FP64_SUPPORT
>> 1524 help
>> 1525 Choose this option to build a kernel for MIPS Warrior P5600 CPU.
>> 1526 It's based on MIPS32r5 ISA with XPA, EVA, dual/quad issue exec pipes,
>> 1527 MMU with two-levels TLB, UCA, MSA, MDU core level features and system
>> 1528 level features like up to six P5600 calculation cores, CM2 with L2
>> 1529 cache, IOCU/IOMMU (though might be unused depending on the system-
>> 1530 specific IP core configuration), GIC, CPC, virtualisation module,
>> 1531 eJTAG and PDtrace.
>> 1532
>> 1533 config CPU_R3000
>> 1534 bool "R3000"
>> 1535 depends on SYS_HAS_CPU_R3000
>> 1536 select CPU_HAS_WB
>> 1537 select CPU_R3K_TLB
>> 1538 select CPU_SUPPORTS_32BIT_KERNEL
>> 1539 select CPU_SUPPORTS_HIGHMEM
>> 1540 help
>> 1541 Please make sure to pick the right CPU type. Linux/MIPS is not
>> 1542 designed to be generic, i.e. Kernels compiled for R3000 CPUs will
>> 1543 *not* work on R4000 machines and vice versa. However, since most
>> 1544 of the supported machines have an R4000 (or similar) CPU, R4x00
>> 1545 might be a safe bet. If the resulting kernel does not work,
>> 1546 try to recompile with R3000.
>> 1547
>> 1548 config CPU_R4300
>> 1549 bool "R4300"
>> 1550 depends on SYS_HAS_CPU_R4300
>> 1551 select CPU_SUPPORTS_32BIT_KERNEL
>> 1552 select CPU_SUPPORTS_64BIT_KERNEL
>> 1553 help
>> 1554 MIPS Technologies R4300-series processors.
>> 1555
>> 1556 config CPU_R4X00
>> 1557 bool "R4x00"
>> 1558 depends on SYS_HAS_CPU_R4X00
>> 1559 select CPU_SUPPORTS_32BIT_KERNEL
>> 1560 select CPU_SUPPORTS_64BIT_KERNEL
>> 1561 select CPU_SUPPORTS_HUGEPAGES
>> 1562 help
>> 1563 MIPS Technologies R4000-series processors other than 4300, including
>> 1564 the R4000, R4400, R4600, and 4700.
>> 1565
>> 1566 config CPU_TX49XX
>> 1567 bool "R49XX"
>> 1568 depends on SYS_HAS_CPU_TX49XX
>> 1569 select CPU_HAS_PREFETCH
>> 1570 select CPU_SUPPORTS_32BIT_KERNEL
>> 1571 select CPU_SUPPORTS_64BIT_KERNEL
>> 1572 select CPU_SUPPORTS_HUGEPAGES
>> 1573
>> 1574 config CPU_R5000
>> 1575 bool "R5000"
>> 1576 depends on SYS_HAS_CPU_R5000
>> 1577 select CPU_SUPPORTS_32BIT_KERNEL
>> 1578 select CPU_SUPPORTS_64BIT_KERNEL
>> 1579 select CPU_SUPPORTS_HUGEPAGES
>> 1580 help
>> 1581 MIPS Technologies R5000-series processors other than the Nevada.
>> 1582
>> 1583 config CPU_R5500
>> 1584 bool "R5500"
>> 1585 depends on SYS_HAS_CPU_R5500
>> 1586 select CPU_SUPPORTS_32BIT_KERNEL
>> 1587 select CPU_SUPPORTS_64BIT_KERNEL
>> 1588 select CPU_SUPPORTS_HUGEPAGES
>> 1589 help
>> 1590 NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
>> 1591 instruction set.
>> 1592
>> 1593 config CPU_NEVADA
>> 1594 bool "RM52xx"
>> 1595 depends on SYS_HAS_CPU_NEVADA
>> 1596 select CPU_SUPPORTS_32BIT_KERNEL
>> 1597 select CPU_SUPPORTS_64BIT_KERNEL
>> 1598 select CPU_SUPPORTS_HUGEPAGES
>> 1599 help
>> 1600 QED / PMC-Sierra RM52xx-series ("Nevada") processors.
>> 1601
>> 1602 config CPU_R10000
>> 1603 bool "R10000"
>> 1604 depends on SYS_HAS_CPU_R10000
>> 1605 select CPU_HAS_PREFETCH
>> 1606 select CPU_SUPPORTS_32BIT_KERNEL
>> 1607 select CPU_SUPPORTS_64BIT_KERNEL
>> 1608 select CPU_SUPPORTS_HIGHMEM
>> 1609 select CPU_SUPPORTS_HUGEPAGES
>> 1610 help
>> 1611 MIPS Technologies R10000-series processors.
>> 1612
>> 1613 config CPU_RM7000
>> 1614 bool "RM7000"
>> 1615 depends on SYS_HAS_CPU_RM7000
>> 1616 select CPU_HAS_PREFETCH
>> 1617 select CPU_SUPPORTS_32BIT_KERNEL
>> 1618 select CPU_SUPPORTS_64BIT_KERNEL
>> 1619 select CPU_SUPPORTS_HIGHMEM
>> 1620 select CPU_SUPPORTS_HUGEPAGES
>> 1621
>> 1622 config CPU_SB1
>> 1623 bool "SB1"
>> 1624 depends on SYS_HAS_CPU_SB1
>> 1625 select CPU_SUPPORTS_32BIT_KERNEL
>> 1626 select CPU_SUPPORTS_64BIT_KERNEL
>> 1627 select CPU_SUPPORTS_HIGHMEM
>> 1628 select CPU_SUPPORTS_HUGEPAGES
>> 1629 select WEAK_ORDERING
>> 1630
>> 1631 config CPU_CAVIUM_OCTEON
>> 1632 bool "Cavium Octeon processor"
>> 1633 depends on SYS_HAS_CPU_CAVIUM_OCTEON
>> 1634 select CPU_HAS_PREFETCH
>> 1635 select CPU_SUPPORTS_64BIT_KERNEL
>> 1636 select HAVE_PAGE_SIZE_8KB if !MIPS_VA_BITS_48
>> 1637 select HAVE_PAGE_SIZE_32KB if !MIPS_VA_BITS_48
>> 1638 select WEAK_ORDERING
>> 1639 select CPU_SUPPORTS_HIGHMEM
>> 1640 select CPU_SUPPORTS_HUGEPAGES
>> 1641 select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
>> 1642 select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
>> 1643 select MIPS_L1_CACHE_SHIFT_7
>> 1644 select CPU_SUPPORTS_VZ
>> 1645 help
>> 1646 The Cavium Octeon processor is a highly integrated chip containing
>> 1647 many ethernet hardware widgets for networking tasks. The processor
>> 1648 can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
>> 1649 Full details can be found at http://www.caviumnetworks.com.
>> 1650
>> 1651 config CPU_BMIPS
>> 1652 bool "Broadcom BMIPS"
>> 1653 depends on SYS_HAS_CPU_BMIPS
>> 1654 select CPU_MIPS32
>> 1655 select CPU_BMIPS32_3300 if SYS_HAS_CPU_BMIPS32_3300
>> 1656 select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
>> 1657 select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
>> 1658 select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
>> 1659 select CPU_SUPPORTS_32BIT_KERNEL
>> 1660 select DMA_NONCOHERENT
>> 1661 select IRQ_MIPS_CPU
>> 1662 select SWAP_IO_SPACE
>> 1663 select WEAK_ORDERING
>> 1664 select CPU_SUPPORTS_HIGHMEM
>> 1665 select CPU_HAS_PREFETCH
>> 1666 select CPU_SUPPORTS_CPUFREQ
>> 1667 select MIPS_EXTERNAL_TIMER
>> 1668 select GENERIC_IRQ_MIGRATION if HOTPLUG_CPU
>> 1669 help
>> 1670 Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors.
>> 1671
>> 1672 endchoice
>> 1673
>> 1674 config LOONGSON3_ENHANCEMENT
>> 1675 bool "New Loongson-3 CPU Enhancements"
>> 1676 default n
>> 1677 depends on CPU_LOONGSON64
>> 1678 help
>> 1679 New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A
>> 1680 R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as
>> 1681 FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPr2 ASE, User
>> 1682 Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer),
>> 1683 Fast TLB refill support, etc.
>> 1684
>> 1685 This option enable those enhancements which are not probed at run
>> 1686 time. If you want a generic kernel to run on all Loongson 3 machines,
>> 1687 please say 'N' here. If you want a high-performance kernel to run on
>> 1688 new Loongson-3 machines only, please say 'Y' here.
>> 1689
>> 1690 config CPU_LOONGSON3_WORKAROUNDS
>> 1691 bool "Loongson-3 LLSC Workarounds"
>> 1692 default y if SMP
>> 1693 depends on CPU_LOONGSON64
>> 1694 help
>> 1695 Loongson-3 processors have the llsc issues which require workarounds.
>> 1696 Without workarounds the system may hang unexpectedly.
>> 1697
>> 1698 Say Y, unless you know what you are doing.
>> 1699
>> 1700 config CPU_LOONGSON3_CPUCFG_EMULATION
>> 1701 bool "Emulate the CPUCFG instruction on older Loongson cores"
>> 1702 default y
>> 1703 depends on CPU_LOONGSON64
>> 1704 help
>> 1705 Loongson-3A R4 and newer have the CPUCFG instruction available for
>> 1706 userland to query CPU capabilities, much like CPUID on x86. This
>> 1707 option provides emulation of the instruction on older Loongson
>> 1708 cores, back to Loongson-3A1000.
>> 1709
>> 1710 If unsure, please say Y.
>> 1711
>> 1712 config CPU_MIPS32_3_5_FEATURES
>> 1713 bool "MIPS32 Release 3.5 Features"
>> 1714 depends on SYS_HAS_CPU_MIPS32_R3_5
>> 1715 depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6 || \
>> 1716 CPU_P5600
>> 1717 help
>> 1718 Choose this option to build a kernel for release 2 or later of the
>> 1719 MIPS32 architecture including features from the 3.5 release such as
>> 1720 support for Enhanced Virtual Addressing (EVA).
>> 1721
>> 1722 config CPU_MIPS32_3_5_EVA
>> 1723 bool "Enhanced Virtual Addressing (EVA)"
>> 1724 depends on CPU_MIPS32_3_5_FEATURES
>> 1725 select EVA
>> 1726 default y
>> 1727 help
>> 1728 Choose this option if you want to enable the Enhanced Virtual
>> 1729 Addressing (EVA) on your MIPS32 core (such as proAptiv).
>> 1730 One of its primary benefits is an increase in the maximum size
>> 1731 of lowmem (up to 3GB). If unsure, say 'N' here.
>> 1732
>> 1733 config CPU_MIPS32_R5_FEATURES
>> 1734 bool "MIPS32 Release 5 Features"
>> 1735 depends on SYS_HAS_CPU_MIPS32_R5
>> 1736 depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_P5600
>> 1737 help
>> 1738 Choose this option to build a kernel for release 2 or later of the
>> 1739 MIPS32 architecture including features from release 5 such as
>> 1740 support for Extended Physical Addressing (XPA).
>> 1741
>> 1742 config CPU_MIPS32_R5_XPA
>> 1743 bool "Extended Physical Addressing (XPA)"
>> 1744 depends on CPU_MIPS32_R5_FEATURES
>> 1745 depends on !EVA
>> 1746 depends on !PAGE_SIZE_4KB
>> 1747 depends on SYS_SUPPORTS_HIGHMEM
>> 1748 select XPA
>> 1749 select HIGHMEM
>> 1750 select PHYS_ADDR_T_64BIT
>> 1751 default n
>> 1752 help
>> 1753 Choose this option if you want to enable the Extended Physical
>> 1754 Addressing (XPA) on your MIPS32 core (such as P5600 series). The
>> 1755 benefit is to increase physical addressing equal to or greater
>> 1756 than 40 bits. Note that this has the side effect of turning on
>> 1757 64-bit addressing which in turn makes the PTEs 64-bit in size.
>> 1758 If unsure, say 'N' here.
>> 1759
>> 1760 if CPU_LOONGSON2F
>> 1761 config CPU_NOP_WORKAROUNDS
61 bool 1762 bool
62 1763
63 config TIME_LOW_RES !! 1764 config CPU_JUMP_WORKAROUNDS
64 bool 1765 bool
>> 1766
>> 1767 config CPU_LOONGSON2F_WORKAROUNDS
>> 1768 bool "Loongson 2F Workarounds"
65 default y 1769 default y
>> 1770 select CPU_NOP_WORKAROUNDS
>> 1771 select CPU_JUMP_WORKAROUNDS
>> 1772 help
>> 1773 Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which
>> 1774 require workarounds. Without workarounds the system may hang
>> 1775 unexpectedly. For more information please refer to the gas
>> 1776 -mfix-loongson2f-nop and -mfix-loongson2f-jump options.
>> 1777
>> 1778 Loongson 2F03 and later have fixed these issues and no workarounds
>> 1779 are needed. The workarounds have no significant side effect on them
>> 1780 but may decrease the performance of the system so this option should
>> 1781 be disabled unless the kernel is intended to be run on 2F01 or 2F02
>> 1782 systems.
66 1783
67 config NO_IOPORT_MAP !! 1784 If unsure, please say Y.
>> 1785 endif # CPU_LOONGSON2F
>> 1786
>> 1787 config SYS_SUPPORTS_ZBOOT
>> 1788 bool
>> 1789 select HAVE_KERNEL_GZIP
>> 1790 select HAVE_KERNEL_BZIP2
>> 1791 select HAVE_KERNEL_LZ4
>> 1792 select HAVE_KERNEL_LZMA
>> 1793 select HAVE_KERNEL_LZO
>> 1794 select HAVE_KERNEL_XZ
>> 1795 select HAVE_KERNEL_ZSTD
>> 1796
>> 1797 config SYS_SUPPORTS_ZBOOT_UART16550
>> 1798 bool
>> 1799 select SYS_SUPPORTS_ZBOOT
>> 1800
>> 1801 config SYS_SUPPORTS_ZBOOT_UART_PROM
>> 1802 bool
>> 1803 select SYS_SUPPORTS_ZBOOT
>> 1804
>> 1805 config CPU_LOONGSON2EF
>> 1806 bool
>> 1807 select CPU_SUPPORTS_32BIT_KERNEL
>> 1808 select CPU_SUPPORTS_64BIT_KERNEL
>> 1809 select CPU_SUPPORTS_HIGHMEM
>> 1810 select CPU_SUPPORTS_HUGEPAGES
>> 1811
>> 1812 config CPU_LOONGSON32
>> 1813 bool
>> 1814 select CPU_MIPS32
>> 1815 select CPU_MIPSR2
>> 1816 select CPU_HAS_PREFETCH
>> 1817 select CPU_SUPPORTS_32BIT_KERNEL
>> 1818 select CPU_SUPPORTS_HIGHMEM
>> 1819 select CPU_SUPPORTS_CPUFREQ
>> 1820
>> 1821 config CPU_BMIPS32_3300
>> 1822 select SMP_UP if SMP
>> 1823 bool
>> 1824
>> 1825 config CPU_BMIPS4350
>> 1826 bool
>> 1827 select SYS_SUPPORTS_SMP
>> 1828 select SYS_SUPPORTS_HOTPLUG_CPU
>> 1829
>> 1830 config CPU_BMIPS4380
>> 1831 bool
>> 1832 select MIPS_L1_CACHE_SHIFT_6
>> 1833 select SYS_SUPPORTS_SMP
>> 1834 select SYS_SUPPORTS_HOTPLUG_CPU
>> 1835 select CPU_HAS_RIXI
>> 1836
>> 1837 config CPU_BMIPS5000
>> 1838 bool
>> 1839 select MIPS_CPU_SCACHE
>> 1840 select MIPS_L1_CACHE_SHIFT_7
>> 1841 select SYS_SUPPORTS_SMP
>> 1842 select SYS_SUPPORTS_HOTPLUG_CPU
>> 1843 select CPU_HAS_RIXI
>> 1844
>> 1845 config SYS_HAS_CPU_LOONGSON64
>> 1846 bool
>> 1847 select CPU_SUPPORTS_CPUFREQ
>> 1848 select CPU_HAS_RIXI
>> 1849
>> 1850 config SYS_HAS_CPU_LOONGSON2E
>> 1851 bool
>> 1852
>> 1853 config SYS_HAS_CPU_LOONGSON2F
>> 1854 bool
>> 1855 select CPU_SUPPORTS_CPUFREQ
>> 1856 select CPU_SUPPORTS_ADDRWINCFG if 64BIT
>> 1857
>> 1858 config SYS_HAS_CPU_LOONGSON1B
>> 1859 bool
>> 1860
>> 1861 config SYS_HAS_CPU_LOONGSON1C
>> 1862 bool
>> 1863
>> 1864 config SYS_HAS_CPU_MIPS32_R1
>> 1865 bool
>> 1866
>> 1867 config SYS_HAS_CPU_MIPS32_R2
>> 1868 bool
>> 1869
>> 1870 config SYS_HAS_CPU_MIPS32_R3_5
>> 1871 bool
>> 1872
>> 1873 config SYS_HAS_CPU_MIPS32_R5
>> 1874 bool
>> 1875
>> 1876 config SYS_HAS_CPU_MIPS32_R6
>> 1877 bool
>> 1878
>> 1879 config SYS_HAS_CPU_MIPS64_R1
>> 1880 bool
>> 1881
>> 1882 config SYS_HAS_CPU_MIPS64_R2
>> 1883 bool
>> 1884
>> 1885 config SYS_HAS_CPU_MIPS64_R5
>> 1886 bool
>> 1887
>> 1888 config SYS_HAS_CPU_MIPS64_R6
>> 1889 bool
>> 1890
>> 1891 config SYS_HAS_CPU_P5600
>> 1892 bool
>> 1893
>> 1894 config SYS_HAS_CPU_R3000
>> 1895 bool
>> 1896
>> 1897 config SYS_HAS_CPU_R4300
>> 1898 bool
>> 1899
>> 1900 config SYS_HAS_CPU_R4X00
>> 1901 bool
>> 1902
>> 1903 config SYS_HAS_CPU_TX49XX
>> 1904 bool
>> 1905
>> 1906 config SYS_HAS_CPU_R5000
>> 1907 bool
>> 1908
>> 1909 config SYS_HAS_CPU_R5500
>> 1910 bool
>> 1911
>> 1912 config SYS_HAS_CPU_NEVADA
>> 1913 bool
>> 1914
>> 1915 config SYS_HAS_CPU_R10000
>> 1916 bool
>> 1917
>> 1918 config SYS_HAS_CPU_RM7000
>> 1919 bool
>> 1920
>> 1921 config SYS_HAS_CPU_SB1
>> 1922 bool
>> 1923
>> 1924 config SYS_HAS_CPU_CAVIUM_OCTEON
>> 1925 bool
>> 1926
>> 1927 config SYS_HAS_CPU_BMIPS
>> 1928 bool
>> 1929
>> 1930 config SYS_HAS_CPU_BMIPS32_3300
>> 1931 bool
>> 1932 select SYS_HAS_CPU_BMIPS
>> 1933
>> 1934 config SYS_HAS_CPU_BMIPS4350
>> 1935 bool
>> 1936 select SYS_HAS_CPU_BMIPS
>> 1937
>> 1938 config SYS_HAS_CPU_BMIPS4380
>> 1939 bool
>> 1940 select SYS_HAS_CPU_BMIPS
>> 1941
>> 1942 config SYS_HAS_CPU_BMIPS5000
>> 1943 bool
>> 1944 select SYS_HAS_CPU_BMIPS
>> 1945
>> 1946 #
>> 1947 # CPU may reorder R->R, R->W, W->R, W->W
>> 1948 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
>> 1949 #
>> 1950 config WEAK_ORDERING
>> 1951 bool
>> 1952
>> 1953 #
>> 1954 # CPU may reorder reads and writes beyond LL/SC
>> 1955 # CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC
>> 1956 #
>> 1957 config WEAK_REORDERING_BEYOND_LLSC
>> 1958 bool
>> 1959 endmenu
>> 1960
>> 1961 #
>> 1962 # These two indicate any level of the MIPS32 and MIPS64 architecture
>> 1963 #
>> 1964 config CPU_MIPS32
>> 1965 bool
>> 1966 default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R5 || \
>> 1967 CPU_MIPS32_R6 || CPU_P5600
>> 1968
>> 1969 config CPU_MIPS64
>> 1970 bool
>> 1971 default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R5 || \
>> 1972 CPU_MIPS64_R6 || CPU_LOONGSON64 || CPU_CAVIUM_OCTEON
>> 1973
>> 1974 #
>> 1975 # These indicate the revision of the architecture
>> 1976 #
>> 1977 config CPU_MIPSR1
>> 1978 bool
>> 1979 default y if CPU_MIPS32_R1 || CPU_MIPS64_R1
>> 1980
>> 1981 config CPU_MIPSR2
>> 1982 bool
>> 1983 default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
>> 1984 select CPU_HAS_RIXI
>> 1985 select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
>> 1986 select MIPS_SPRAM
>> 1987
>> 1988 config CPU_MIPSR5
>> 1989 bool
>> 1990 default y if CPU_MIPS32_R5 || CPU_MIPS64_R5 || CPU_P5600
>> 1991 select CPU_HAS_RIXI
>> 1992 select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
>> 1993 select MIPS_SPRAM
>> 1994
>> 1995 config CPU_MIPSR6
>> 1996 bool
>> 1997 default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
>> 1998 select CPU_HAS_RIXI
>> 1999 select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
>> 2000 select HAVE_ARCH_BITREVERSE
>> 2001 select MIPS_ASID_BITS_VARIABLE
>> 2002 select MIPS_CRC_SUPPORT
>> 2003 select MIPS_SPRAM
>> 2004
>> 2005 config TARGET_ISA_REV
>> 2006 int
>> 2007 default 1 if CPU_MIPSR1
>> 2008 default 2 if CPU_MIPSR2
>> 2009 default 5 if CPU_MIPSR5
>> 2010 default 6 if CPU_MIPSR6
>> 2011 default 0
>> 2012 help
>> 2013 Reflects the ISA revision being targeted by the kernel build. This
>> 2014 is effectively the Kconfig equivalent of MIPS_ISA_REV.
>> 2015
>> 2016 config EVA
>> 2017 bool
>> 2018
>> 2019 config XPA
>> 2020 bool
>> 2021
>> 2022 config SYS_SUPPORTS_32BIT_KERNEL
>> 2023 bool
>> 2024 config SYS_SUPPORTS_64BIT_KERNEL
>> 2025 bool
>> 2026 config CPU_SUPPORTS_32BIT_KERNEL
>> 2027 bool
>> 2028 config CPU_SUPPORTS_64BIT_KERNEL
>> 2029 bool
>> 2030 config CPU_SUPPORTS_CPUFREQ
>> 2031 bool
>> 2032 config CPU_SUPPORTS_ADDRWINCFG
>> 2033 bool
>> 2034 config CPU_SUPPORTS_HUGEPAGES
>> 2035 bool
>> 2036 depends on !(32BIT && (PHYS_ADDR_T_64BIT || EVA))
>> 2037 config CPU_SUPPORTS_VZ
>> 2038 bool
>> 2039 config MIPS_PGD_C0_CONTEXT
>> 2040 bool
>> 2041 depends on 64BIT
>> 2042 default y if (CPU_MIPSR2 || CPU_MIPSR6)
>> 2043
>> 2044 #
>> 2045 # Set to y for ptrace access to watch registers.
>> 2046 #
>> 2047 config HARDWARE_WATCHPOINTS
>> 2048 bool
>> 2049 default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6
>> 2050
>> 2051 menu "Kernel type"
>> 2052
>> 2053 choice
>> 2054 prompt "Kernel code model"
>> 2055 help
>> 2056 You should only select this option if you have a workload that
>> 2057 actually benefits from 64-bit processing or if your machine has
>> 2058 large memory. You will only be presented a single option in this
>> 2059 menu if your system does not support both 32-bit and 64-bit kernels.
>> 2060
>> 2061 config 32BIT
>> 2062 bool "32-bit kernel"
>> 2063 depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
>> 2064 select TRAD_SIGNALS
>> 2065 help
>> 2066 Select this option if you want to build a 32-bit kernel.
>> 2067
>> 2068 config 64BIT
>> 2069 bool "64-bit kernel"
>> 2070 depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
>> 2071 help
>> 2072 Select this option if you want to build a 64-bit kernel.
>> 2073
>> 2074 endchoice
>> 2075
>> 2076 config MIPS_VA_BITS_48
>> 2077 bool "48 bits virtual memory"
>> 2078 depends on 64BIT
>> 2079 help
>> 2080 Support a maximum at least 48 bits of application virtual
>> 2081 memory. Default is 40 bits or less, depending on the CPU.
>> 2082 For page sizes 16k and above, this option results in a small
>> 2083 memory overhead for page tables. For 4k page size, a fourth
>> 2084 level of page tables is added which imposes both a memory
>> 2085 overhead as well as slower TLB fault handling.
>> 2086
>> 2087 If unsure, say N.
>> 2088
>> 2089 config ZBOOT_LOAD_ADDRESS
>> 2090 hex "Compressed kernel load address"
>> 2091 default 0xffffffff80400000 if BCM47XX
>> 2092 default 0x0
>> 2093 depends on SYS_SUPPORTS_ZBOOT
>> 2094 help
>> 2095 The address to load compressed kernel, aka vmlinuz.
>> 2096
>> 2097 This is only used if non-zero.
>> 2098
>> 2099 config ARCH_FORCE_MAX_ORDER
>> 2100 int "Maximum zone order"
>> 2101 default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
>> 2102 default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
>> 2103 default "11" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
>> 2104 default "10"
>> 2105 help
>> 2106 The kernel memory allocator divides physically contiguous memory
>> 2107 blocks into "zones", where each zone is a power of two number of
>> 2108 pages. This option selects the largest power of two that the kernel
>> 2109 keeps in the memory allocator. If you need to allocate very large
>> 2110 blocks of physically contiguous memory, then you may need to
>> 2111 increase this value.
>> 2112
>> 2113 The page size is not necessarily 4KB. Keep this in mind
>> 2114 when choosing a value for this option.
>> 2115
>> 2116 config BOARD_SCACHE
>> 2117 bool
>> 2118
>> 2119 config IP22_CPU_SCACHE
>> 2120 bool
>> 2121 select BOARD_SCACHE
>> 2122
>> 2123 #
>> 2124 # Support for a MIPS32 / MIPS64 style S-caches
>> 2125 #
>> 2126 config MIPS_CPU_SCACHE
>> 2127 bool
>> 2128 select BOARD_SCACHE
>> 2129
>> 2130 config R5000_CPU_SCACHE
>> 2131 bool
>> 2132 select BOARD_SCACHE
>> 2133
>> 2134 config RM7000_CPU_SCACHE
>> 2135 bool
>> 2136 select BOARD_SCACHE
>> 2137
>> 2138 config SIBYTE_DMA_PAGEOPS
>> 2139 bool "Use DMA to clear/copy pages"
>> 2140 depends on CPU_SB1
>> 2141 help
>> 2142 Instead of using the CPU to zero and copy pages, use a Data Mover
>> 2143 channel. These DMA channels are otherwise unused by the standard
>> 2144 SiByte Linux port. Seems to give a small performance benefit.
>> 2145
>> 2146 config CPU_HAS_PREFETCH
>> 2147 bool
>> 2148
>> 2149 config CPU_GENERIC_DUMP_TLB
>> 2150 bool
>> 2151 default y if !CPU_R3000
>> 2152
>> 2153 config MIPS_FP_SUPPORT
>> 2154 bool "Floating Point support" if EXPERT
>> 2155 default y
>> 2156 help
>> 2157 Select y to include support for floating point in the kernel
>> 2158 including initialization of FPU hardware, FP context save & restore
>> 2159 and emulation of an FPU where necessary. Without this support any
>> 2160 userland program attempting to use floating point instructions will
>> 2161 receive a SIGILL.
>> 2162
>> 2163 If you know that your userland will not attempt to use floating point
>> 2164 instructions then you can say n here to shrink the kernel a little.
>> 2165
>> 2166 If unsure, say y.
>> 2167
>> 2168 config CPU_R2300_FPU
>> 2169 bool
>> 2170 depends on MIPS_FP_SUPPORT
>> 2171 default y if CPU_R3000
>> 2172
>> 2173 config CPU_R3K_TLB
>> 2174 bool
>> 2175
>> 2176 config CPU_R4K_FPU
>> 2177 bool
>> 2178 depends on MIPS_FP_SUPPORT
>> 2179 default y if !CPU_R2300_FPU
>> 2180
>> 2181 config CPU_R4K_CACHE_TLB
>> 2182 bool
>> 2183 default y if !(CPU_R3K_TLB || CPU_SB1 || CPU_CAVIUM_OCTEON)
>> 2184
>> 2185 config MIPS_MT_SMP
>> 2186 bool "MIPS MT SMP support (1 TC on each available VPE)"
>> 2187 default y
>> 2188 depends on TARGET_ISA_REV > 0 && TARGET_ISA_REV < 6
>> 2189 depends on SYS_SUPPORTS_MULTITHREADING && !CPU_MICROMIPS
>> 2190 select CPU_MIPSR2_IRQ_VI
>> 2191 select CPU_MIPSR2_IRQ_EI
>> 2192 select SYNC_R4K
>> 2193 select MIPS_MT
>> 2194 select SMP
>> 2195 select SMP_UP
>> 2196 select SYS_SUPPORTS_SMP
>> 2197 select SYS_SUPPORTS_SCHED_SMT
>> 2198 select MIPS_PERF_SHARED_TC_COUNTERS
>> 2199 help
>> 2200 This is a kernel model which is known as SMVP. This is supported
>> 2201 on cores with the MT ASE and uses the available VPEs to implement
>> 2202 virtual processors which supports SMP. This is equivalent to the
>> 2203 Intel Hyperthreading feature. For further information go to
>> 2204 <http://www.imgtec.com/mips/mips-multithreading.asp>.
>> 2205
>> 2206 config MIPS_MT
>> 2207 bool
>> 2208
>> 2209 config SCHED_SMT
>> 2210 bool "SMT (multithreading) scheduler support"
>> 2211 depends on SYS_SUPPORTS_SCHED_SMT
>> 2212 default n
>> 2213 help
>> 2214 SMT scheduler support improves the CPU scheduler's decision making
>> 2215 when dealing with MIPS MT enabled cores at a cost of slightly
>> 2216 increased overhead in some places. If unsure say N here.
>> 2217
>> 2218 config SYS_SUPPORTS_SCHED_SMT
>> 2219 bool
>> 2220
>> 2221 config SYS_SUPPORTS_MULTITHREADING
>> 2222 bool
>> 2223
>> 2224 config MIPS_MT_FPAFF
>> 2225 bool "Dynamic FPU affinity for FP-intensive threads"
>> 2226 default y
>> 2227 depends on MIPS_MT_SMP
>> 2228
>> 2229 config MIPSR2_TO_R6_EMULATOR
>> 2230 bool "MIPS R2-to-R6 emulator"
>> 2231 depends on CPU_MIPSR6
>> 2232 depends on MIPS_FP_SUPPORT
>> 2233 default y
>> 2234 help
>> 2235 Choose this option if you want to run non-R6 MIPS userland code.
>> 2236 Even if you say 'Y' here, the emulator will still be disabled by
>> 2237 default. You can enable it using the 'mipsr2emu' kernel option.
>> 2238 The only reason this is a build-time option is to save ~14K from the
>> 2239 final kernel image.
>> 2240
>> 2241 config SYS_SUPPORTS_VPE_LOADER
>> 2242 bool
>> 2243 depends on SYS_SUPPORTS_MULTITHREADING
>> 2244 help
>> 2245 Indicates that the platform supports the VPE loader, and provides
>> 2246 physical_memsize.
>> 2247
>> 2248 config MIPS_VPE_LOADER
>> 2249 bool "VPE loader support."
>> 2250 depends on SYS_SUPPORTS_VPE_LOADER && MODULES
>> 2251 select CPU_MIPSR2_IRQ_VI
>> 2252 select CPU_MIPSR2_IRQ_EI
>> 2253 select MIPS_MT
>> 2254 help
>> 2255 Includes a loader for loading an elf relocatable object
>> 2256 onto another VPE and running it.
>> 2257
>> 2258 config MIPS_VPE_LOADER_MT
>> 2259 bool
>> 2260 default "y"
>> 2261 depends on MIPS_VPE_LOADER
>> 2262
>> 2263 config MIPS_VPE_LOADER_TOM
>> 2264 bool "Load VPE program into memory hidden from linux"
>> 2265 depends on MIPS_VPE_LOADER
>> 2266 default y
>> 2267 help
>> 2268 The loader can use memory that is present but has been hidden from
>> 2269 Linux using the kernel command line option "mem=xxMB". It's up to
>> 2270 you to ensure the amount you put in the option and the space your
>> 2271 program requires is less or equal to the amount physically present.
>> 2272
>> 2273 config MIPS_VPE_APSP_API
>> 2274 bool "Enable support for AP/SP API (RTLX)"
>> 2275 depends on MIPS_VPE_LOADER
>> 2276
>> 2277 config MIPS_VPE_APSP_API_MT
>> 2278 bool
>> 2279 default "y"
>> 2280 depends on MIPS_VPE_APSP_API
>> 2281
>> 2282 config MIPS_CPS
>> 2283 bool "MIPS Coherent Processing System support"
>> 2284 depends on SYS_SUPPORTS_MIPS_CPS
>> 2285 select MIPS_CM
>> 2286 select MIPS_CPS_PM if HOTPLUG_CPU
>> 2287 select SMP
>> 2288 select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
>> 2289 select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
>> 2290 select SYS_SUPPORTS_HOTPLUG_CPU
>> 2291 select SYS_SUPPORTS_SCHED_SMT if CPU_MIPSR6
>> 2292 select SYS_SUPPORTS_SMP
>> 2293 select WEAK_ORDERING
>> 2294 select GENERIC_IRQ_MIGRATION if HOTPLUG_CPU
>> 2295 help
>> 2296 Select this if you wish to run an SMP kernel across multiple cores
>> 2297 within a MIPS Coherent Processing System. When this option is
>> 2298 enabled the kernel will probe for other cores and boot them with
>> 2299 no external assistance. It is safe to enable this when hardware
>> 2300 support is unavailable.
>> 2301
>> 2302 config MIPS_CPS_PM
>> 2303 depends on MIPS_CPS
>> 2304 bool
>> 2305
>> 2306 config MIPS_CM
>> 2307 bool
>> 2308 select MIPS_CPC
>> 2309
>> 2310 config MIPS_CPC
>> 2311 bool
>> 2312
>> 2313 config SB1_PASS_2_WORKAROUNDS
>> 2314 bool
>> 2315 depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
>> 2316 default y
>> 2317
>> 2318 config SB1_PASS_2_1_WORKAROUNDS
>> 2319 bool
>> 2320 depends on CPU_SB1 && CPU_SB1_PASS_2
>> 2321 default y
>> 2322
>> 2323 choice
>> 2324 prompt "SmartMIPS or microMIPS ASE support"
>> 2325
>> 2326 config CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS
>> 2327 bool "None"
>> 2328 help
>> 2329 Select this if you want neither microMIPS nor SmartMIPS support
>> 2330
>> 2331 config CPU_HAS_SMARTMIPS
>> 2332 depends on SYS_SUPPORTS_SMARTMIPS
>> 2333 bool "SmartMIPS"
>> 2334 help
>> 2335 SmartMIPS is a extension of the MIPS32 architecture aimed at
>> 2336 increased security at both hardware and software level for
>> 2337 smartcards. Enabling this option will allow proper use of the
>> 2338 SmartMIPS instructions by Linux applications. However a kernel with
>> 2339 this option will not work on a MIPS core without SmartMIPS core. If
>> 2340 you don't know you probably don't have SmartMIPS and should say N
>> 2341 here.
>> 2342
>> 2343 config CPU_MICROMIPS
>> 2344 depends on 32BIT && SYS_SUPPORTS_MICROMIPS && !CPU_MIPSR6
>> 2345 bool "microMIPS"
>> 2346 help
>> 2347 When this option is enabled the kernel will be built using the
>> 2348 microMIPS ISA
>> 2349
>> 2350 endchoice
>> 2351
>> 2352 config CPU_HAS_MSA
>> 2353 bool "Support for the MIPS SIMD Architecture"
>> 2354 depends on CPU_SUPPORTS_MSA
>> 2355 depends on MIPS_FP_SUPPORT
>> 2356 depends on 64BIT || MIPS_O32_FP64_SUPPORT
>> 2357 help
>> 2358 MIPS SIMD Architecture (MSA) introduces 128 bit wide vector registers
>> 2359 and a set of SIMD instructions to operate on them. When this option
>> 2360 is enabled the kernel will support allocating & switching MSA
>> 2361 vector register contexts. If you know that your kernel will only be
>> 2362 running on CPUs which do not support MSA or that your userland will
>> 2363 not be making use of it then you may wish to say N here to reduce
>> 2364 the size & complexity of your kernel.
>> 2365
>> 2366 If unsure, say Y.
>> 2367
>> 2368 config CPU_HAS_WB
>> 2369 bool
>> 2370
>> 2371 config XKS01
>> 2372 bool
>> 2373
>> 2374 config CPU_HAS_DIEI
>> 2375 depends on !CPU_DIEI_BROKEN
>> 2376 bool
>> 2377
>> 2378 config CPU_DIEI_BROKEN
>> 2379 bool
>> 2380
>> 2381 config CPU_HAS_RIXI
>> 2382 bool
>> 2383
>> 2384 config CPU_NO_LOAD_STORE_LR
>> 2385 bool
>> 2386 help
>> 2387 CPU lacks support for unaligned load and store instructions:
>> 2388 LWL, LWR, SWL, SWR (Load/store word left/right).
>> 2389 LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit
>> 2390 systems).
>> 2391
>> 2392 #
>> 2393 # Vectored interrupt mode is an R2 feature
>> 2394 #
>> 2395 config CPU_MIPSR2_IRQ_VI
>> 2396 bool
>> 2397
>> 2398 #
>> 2399 # Extended interrupt mode is an R2 feature
>> 2400 #
>> 2401 config CPU_MIPSR2_IRQ_EI
>> 2402 bool
>> 2403
>> 2404 config CPU_HAS_SYNC
>> 2405 bool
>> 2406 depends on !CPU_R3000
>> 2407 default y
>> 2408
>> 2409 #
>> 2410 # CPU non-features
>> 2411 #
>> 2412
>> 2413 # Work around the "daddi" and "daddiu" CPU errata:
>> 2414 #
>> 2415 # - The `daddi' instruction fails to trap on overflow.
>> 2416 # "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
>> 2417 # erratum #23
>> 2418 #
>> 2419 # - The `daddiu' instruction can produce an incorrect result.
>> 2420 # "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
>> 2421 # erratum #41
>> 2422 # "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
>> 2423 # #15
>> 2424 # "MIPS R4400PC/SC Errata, Processor Revision 1.0", erratum #7
>> 2425 # "MIPS R4400MC Errata, Processor Revision 1.0", erratum #5
>> 2426 config CPU_DADDI_WORKAROUNDS
>> 2427 bool
>> 2428
>> 2429 # Work around certain R4000 CPU errata (as implemented by GCC):
>> 2430 #
>> 2431 # - A double-word or a variable shift may give an incorrect result
>> 2432 # if executed immediately after starting an integer division:
>> 2433 # "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
>> 2434 # erratum #28
>> 2435 # "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
>> 2436 # #19
>> 2437 #
>> 2438 # - A double-word or a variable shift may give an incorrect result
>> 2439 # if executed while an integer multiplication is in progress:
>> 2440 # "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
>> 2441 # errata #16 & #28
>> 2442 #
>> 2443 # - An integer division may give an incorrect result if started in
>> 2444 # a delay slot of a taken branch or a jump:
>> 2445 # "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
>> 2446 # erratum #52
>> 2447 config CPU_R4000_WORKAROUNDS
>> 2448 bool
>> 2449 select CPU_R4400_WORKAROUNDS
>> 2450
>> 2451 # Work around certain R4400 CPU errata (as implemented by GCC):
>> 2452 #
>> 2453 # - A double-word or a variable shift may give an incorrect result
>> 2454 # if executed immediately after starting an integer division:
>> 2455 # "MIPS R4400MC Errata, Processor Revision 1.0", erratum #10
>> 2456 # "MIPS R4400MC Errata, Processor Revision 2.0 & 3.0", erratum #4
>> 2457 config CPU_R4400_WORKAROUNDS
>> 2458 bool
>> 2459
>> 2460 config CPU_R4X00_BUGS64
>> 2461 bool
>> 2462 default y if SYS_HAS_CPU_R4X00 && 64BIT && (TARGET_ISA_REV < 1)
>> 2463
>> 2464 config MIPS_ASID_SHIFT
>> 2465 int
>> 2466 default 6 if CPU_R3000
>> 2467 default 0
>> 2468
>> 2469 config MIPS_ASID_BITS
>> 2470 int
>> 2471 default 0 if MIPS_ASID_BITS_VARIABLE
>> 2472 default 6 if CPU_R3000
>> 2473 default 8
>> 2474
>> 2475 config MIPS_ASID_BITS_VARIABLE
>> 2476 bool
>> 2477
>> 2478 config MIPS_CRC_SUPPORT
>> 2479 bool
>> 2480
>> 2481 # R4600 erratum. Due to the lack of errata information the exact
>> 2482 # technical details aren't known. I've experimentally found that disabling
>> 2483 # interrupts during indexed I-cache flushes seems to be sufficient to deal
>> 2484 # with the issue.
>> 2485 config WAR_R4600_V1_INDEX_ICACHEOP
>> 2486 bool
>> 2487
>> 2488 # Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata:
>> 2489 #
>> 2490 # 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
>> 2491 # Hit_Invalidate_D and Create_Dirty_Excl_D should only be
>> 2492 # executed if there is no other dcache activity. If the dcache is
>> 2493 # accessed for another instruction immediately preceding when these
>> 2494 # cache instructions are executing, it is possible that the dcache
>> 2495 # tag match outputs used by these cache instructions will be
>> 2496 # incorrect. These cache instructions should be preceded by at least
>> 2497 # four instructions that are not any kind of load or store
>> 2498 # instruction.
>> 2499 #
>> 2500 # This is not allowed: lw
>> 2501 # nop
>> 2502 # nop
>> 2503 # nop
>> 2504 # cache Hit_Writeback_Invalidate_D
>> 2505 #
>> 2506 # This is allowed: lw
>> 2507 # nop
>> 2508 # nop
>> 2509 # nop
>> 2510 # nop
>> 2511 # cache Hit_Writeback_Invalidate_D
>> 2512 config WAR_R4600_V1_HIT_CACHEOP
>> 2513 bool
>> 2514
>> 2515 # Writeback and invalidate the primary cache dcache before DMA.
>> 2516 #
>> 2517 # R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
>> 2518 # Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
>> 2519 # operate correctly if the internal data cache refill buffer is empty. These
>> 2520 # CACHE instructions should be separated from any potential data cache miss
>> 2521 # by a load instruction to an uncached address to empty the response buffer."
>> 2522 # (Revision 2.0 device errata from IDT available on https://www.idt.com/
>> 2523 # in .pdf format.)
>> 2524 config WAR_R4600_V2_HIT_CACHEOP
>> 2525 bool
>> 2526
>> 2527 # From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for
>> 2528 # the line which this instruction itself exists, the following
>> 2529 # operation is not guaranteed."
>> 2530 #
>> 2531 # Workaround: do two phase flushing for Index_Invalidate_I
>> 2532 config WAR_TX49XX_ICACHE_INDEX_INV
>> 2533 bool
>> 2534
>> 2535 # The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra
>> 2536 # opposes it being called that) where invalid instructions in the same
>> 2537 # I-cache line worth of instructions being fetched may case spurious
>> 2538 # exceptions.
>> 2539 config WAR_ICACHE_REFILLS
>> 2540 bool
>> 2541
>> 2542 # On the R10000 up to version 2.6 (not sure about 2.7) there is a bug that
>> 2543 # may cause ll / sc and lld / scd sequences to execute non-atomically.
>> 2544 config WAR_R10000_LLSC
>> 2545 bool
>> 2546
>> 2547 # 34K core erratum: "Problems Executing the TLBR Instruction"
>> 2548 config WAR_MIPS34K_MISSED_ITLB
>> 2549 bool
>> 2550
>> 2551 #
>> 2552 # - Highmem only makes sense for the 32-bit kernel.
>> 2553 # - The current highmem code will only work properly on physically indexed
>> 2554 # caches such as R3000, SB1, R7000 or those that look like they're virtually
>> 2555 # indexed such as R4000/R4400 SC and MC versions or R10000. So for the
>> 2556 # moment we protect the user and offer the highmem option only on machines
>> 2557 # where it's known to be safe. This will not offer highmem on a few systems
>> 2558 # such as MIPS32 and MIPS64 CPUs which may have virtual and physically
>> 2559 # indexed CPUs but we're playing safe.
>> 2560 # - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we
>> 2561 # know they might have memory configurations that could make use of highmem
>> 2562 # support.
>> 2563 #
>> 2564 config HIGHMEM
>> 2565 bool "High Memory Support"
>> 2566 depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM && !CPU_MIPS32_3_5_EVA
>> 2567 select KMAP_LOCAL
>> 2568
>> 2569 config CPU_SUPPORTS_HIGHMEM
>> 2570 bool
>> 2571
>> 2572 config SYS_SUPPORTS_HIGHMEM
>> 2573 bool
>> 2574
>> 2575 config SYS_SUPPORTS_SMARTMIPS
>> 2576 bool
>> 2577
>> 2578 config SYS_SUPPORTS_MICROMIPS
>> 2579 bool
>> 2580
>> 2581 config SYS_SUPPORTS_MIPS16
>> 2582 bool
>> 2583 help
>> 2584 This option must be set if a kernel might be executed on a MIPS16-
>> 2585 enabled CPU even if MIPS16 is not actually being used. In other
>> 2586 words, it makes the kernel MIPS16-tolerant.
>> 2587
>> 2588 config CPU_SUPPORTS_MSA
>> 2589 bool
>> 2590
>> 2591 config ARCH_FLATMEM_ENABLE
68 def_bool y 2592 def_bool y
>> 2593 depends on !NUMA && !CPU_LOONGSON2EF
69 2594
70 config HZ !! 2595 config ARCH_SPARSEMEM_ENABLE
>> 2596 bool
>> 2597
>> 2598 config NUMA
>> 2599 bool "NUMA Support"
>> 2600 depends on SYS_SUPPORTS_NUMA
>> 2601 select SMP
>> 2602 select HAVE_SETUP_PER_CPU_AREA
>> 2603 select NEED_PER_CPU_EMBED_FIRST_CHUNK
>> 2604 help
>> 2605 Say Y to compile the kernel to support NUMA (Non-Uniform Memory
>> 2606 Access). This option improves performance on systems with more
>> 2607 than two nodes; on two node systems it is generally better to
>> 2608 leave it disabled; on single node systems leave this option
>> 2609 disabled.
>> 2610
>> 2611 config SYS_SUPPORTS_NUMA
>> 2612 bool
>> 2613
>> 2614 config RELOCATABLE
>> 2615 bool "Relocatable kernel"
>> 2616 depends on SYS_SUPPORTS_RELOCATABLE
>> 2617 depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || \
>> 2618 CPU_MIPS32_R5 || CPU_MIPS64_R5 || \
>> 2619 CPU_MIPS32_R6 || CPU_MIPS64_R6 || \
>> 2620 CPU_P5600 || CAVIUM_OCTEON_SOC || \
>> 2621 CPU_LOONGSON64
>> 2622 help
>> 2623 This builds a kernel image that retains relocation information
>> 2624 so it can be loaded someplace besides the default 1MB.
>> 2625 The relocations make the kernel binary about 15% larger,
>> 2626 but are discarded at runtime
>> 2627
>> 2628 config RELOCATION_TABLE_SIZE
>> 2629 hex "Relocation table size"
>> 2630 depends on RELOCATABLE
>> 2631 range 0x0 0x01000000
>> 2632 default "0x00200000" if CPU_LOONGSON64
>> 2633 default "0x00100000"
>> 2634 help
>> 2635 A table of relocation data will be appended to the kernel binary
>> 2636 and parsed at boot to fix up the relocated kernel.
>> 2637
>> 2638 This option allows the amount of space reserved for the table to be
>> 2639 adjusted, although the default of 1Mb should be ok in most cases.
>> 2640
>> 2641 The build will fail and a valid size suggested if this is too small.
>> 2642
>> 2643 If unsure, leave at the default value.
>> 2644
>> 2645 config RANDOMIZE_BASE
>> 2646 bool "Randomize the address of the kernel image"
>> 2647 depends on RELOCATABLE
>> 2648 help
>> 2649 Randomizes the physical and virtual address at which the
>> 2650 kernel image is loaded, as a security feature that
>> 2651 deters exploit attempts relying on knowledge of the location
>> 2652 of kernel internals.
>> 2653
>> 2654 Entropy is generated using any coprocessor 0 registers available.
>> 2655
>> 2656 The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
>> 2657
>> 2658 If unsure, say N.
>> 2659
>> 2660 config RANDOMIZE_BASE_MAX_OFFSET
>> 2661 hex "Maximum kASLR offset" if EXPERT
>> 2662 depends on RANDOMIZE_BASE
>> 2663 range 0x0 0x40000000 if EVA || 64BIT
>> 2664 range 0x0 0x08000000
>> 2665 default "0x01000000"
>> 2666 help
>> 2667 When kASLR is active, this provides the maximum offset that will
>> 2668 be applied to the kernel image. It should be set according to the
>> 2669 amount of physical RAM available in the target system minus
>> 2670 PHYSICAL_START and must be a power of 2.
>> 2671
>> 2672 This is limited by the size of KSEG0, 256Mb on 32-bit or 1Gb with
>> 2673 EVA or 64-bit. The default is 16Mb.
>> 2674
>> 2675 config NODES_SHIFT
71 int 2676 int
72 default 1000 if CLEOPATRA !! 2677 default "6"
73 default 100 !! 2678 depends on NUMA
74 2679
75 config PGTABLE_LEVELS !! 2680 config HW_PERF_EVENTS
76 default 2 if SUN3 || COLDFIRE !! 2681 bool "Enable hardware performance counter support for perf events"
77 default 3 !! 2682 depends on PERF_EVENTS && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_LOONGSON64)
>> 2683 default y
>> 2684 help
>> 2685 Enable hardware performance counter support for perf events. If
>> 2686 disabled, perf events will use software events only.
78 2687
79 config MMU !! 2688 config DMI
80 bool "MMU-based Paged Memory Managemen !! 2689 bool "Enable DMI scanning"
>> 2690 depends on MACH_LOONGSON64
>> 2691 select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
81 default y 2692 default y
82 help 2693 help
83 Select if you want MMU-based virtual !! 2694 Enabled scanning of DMI to identify machine quirks. Say Y
84 support by paged memory management. !! 2695 here unless you have verified that your setup is not
>> 2696 affected by entries in the DMI blacklist. Required by PNP
>> 2697 BIOS code.
>> 2698
>> 2699 config SMP
>> 2700 bool "Multi-Processing support"
>> 2701 depends on SYS_SUPPORTS_SMP
>> 2702 help
>> 2703 This enables support for systems with more than one CPU. If you have
>> 2704 a system with only one CPU, say N. If you have a system with more
>> 2705 than one CPU, say Y.
>> 2706
>> 2707 If you say N here, the kernel will run on uni- and multiprocessor
>> 2708 machines, but will use only one CPU of a multiprocessor machine. If
>> 2709 you say Y here, the kernel will run on many, but not all,
>> 2710 uniprocessor machines. On a uniprocessor machine, the kernel
>> 2711 will run faster if you say N here.
>> 2712
>> 2713 People using multiprocessor machines who say Y here should also say
>> 2714 Y to "Enhanced Real Time Clock Support", below.
>> 2715
>> 2716 See also the SMP-HOWTO available at
>> 2717 <https://www.tldp.org/docs.html#howto>.
>> 2718
>> 2719 If you don't know what to do here, say N.
>> 2720
>> 2721 config HOTPLUG_CPU
>> 2722 bool "Support for hot-pluggable CPUs"
>> 2723 depends on SMP && SYS_SUPPORTS_HOTPLUG_CPU
>> 2724 help
>> 2725 Say Y here to allow turning CPUs off and on. CPUs can be
>> 2726 controlled through /sys/devices/system/cpu.
>> 2727 (Note: power management support will enable this option
>> 2728 automatically on SMP systems. )
>> 2729 Say N if you want to disable CPU hotplug.
>> 2730
>> 2731 config SMP_UP
>> 2732 bool
>> 2733
>> 2734 config SYS_SUPPORTS_MIPS_CPS
>> 2735 bool
>> 2736
>> 2737 config SYS_SUPPORTS_SMP
>> 2738 bool
>> 2739
>> 2740 config NR_CPUS_DEFAULT_4
>> 2741 bool
>> 2742
>> 2743 config NR_CPUS_DEFAULT_8
>> 2744 bool
>> 2745
>> 2746 config NR_CPUS_DEFAULT_16
>> 2747 bool
>> 2748
>> 2749 config NR_CPUS_DEFAULT_32
>> 2750 bool
>> 2751
>> 2752 config NR_CPUS_DEFAULT_64
>> 2753 bool
>> 2754
>> 2755 config NR_CPUS
>> 2756 int "Maximum number of CPUs (2-256)"
>> 2757 range 2 256
>> 2758 depends on SMP
>> 2759 default "4" if NR_CPUS_DEFAULT_4
>> 2760 default "8" if NR_CPUS_DEFAULT_8
>> 2761 default "16" if NR_CPUS_DEFAULT_16
>> 2762 default "32" if NR_CPUS_DEFAULT_32
>> 2763 default "64" if NR_CPUS_DEFAULT_64
>> 2764 help
>> 2765 This allows you to specify the maximum number of CPUs which this
>> 2766 kernel will support. The maximum supported value is 32 for 32-bit
>> 2767 kernel and 64 for 64-bit kernels; the minimum value which makes
>> 2768 sense is 1 for Qemu (useful only for kernel debugging purposes)
>> 2769 and 2 for all others.
>> 2770
>> 2771 This is purely to save memory - each supported CPU adds
>> 2772 approximately eight kilobytes to the kernel image. For best
>> 2773 performance should round up your number of processors to the next
>> 2774 power of two.
>> 2775
>> 2776 config MIPS_PERF_SHARED_TC_COUNTERS
>> 2777 bool
>> 2778
>> 2779 config MIPS_NR_CPU_NR_MAP_1024
>> 2780 bool
>> 2781
>> 2782 config MIPS_NR_CPU_NR_MAP
>> 2783 int
>> 2784 depends on SMP
>> 2785 default 1024 if MIPS_NR_CPU_NR_MAP_1024
>> 2786 default NR_CPUS if !MIPS_NR_CPU_NR_MAP_1024
>> 2787
>> 2788 #
>> 2789 # Timer Interrupt Frequency Configuration
>> 2790 #
>> 2791
>> 2792 choice
>> 2793 prompt "Timer frequency"
>> 2794 default HZ_250
>> 2795 help
>> 2796 Allows the configuration of the timer frequency.
>> 2797
>> 2798 config HZ_24
>> 2799 bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ
>> 2800
>> 2801 config HZ_48
>> 2802 bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
>> 2803
>> 2804 config HZ_100
>> 2805 bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ
>> 2806
>> 2807 config HZ_128
>> 2808 bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ
>> 2809
>> 2810 config HZ_250
>> 2811 bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ
85 2812
86 config MMU_MOTOROLA !! 2813 config HZ_256
>> 2814 bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ
>> 2815
>> 2816 config HZ_1000
>> 2817 bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ
>> 2818
>> 2819 config HZ_1024
>> 2820 bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ
>> 2821
>> 2822 endchoice
>> 2823
>> 2824 config SYS_SUPPORTS_24HZ
>> 2825 bool
>> 2826
>> 2827 config SYS_SUPPORTS_48HZ
>> 2828 bool
>> 2829
>> 2830 config SYS_SUPPORTS_100HZ
>> 2831 bool
>> 2832
>> 2833 config SYS_SUPPORTS_128HZ
87 bool 2834 bool
88 select HAVE_PAGE_SIZE_4KB <<
89 2835
90 config MMU_COLDFIRE !! 2836 config SYS_SUPPORTS_250HZ
91 select HAVE_PAGE_SIZE_8KB <<
92 bool 2837 bool
93 2838
94 config MMU_SUN3 !! 2839 config SYS_SUPPORTS_256HZ
95 bool 2840 bool
96 select HAVE_PAGE_SIZE_8KB !! 2841
97 depends on MMU && !MMU_MOTOROLA && !MM !! 2842 config SYS_SUPPORTS_1000HZ
>> 2843 bool
>> 2844
>> 2845 config SYS_SUPPORTS_1024HZ
>> 2846 bool
>> 2847
>> 2848 config SYS_SUPPORTS_ARBIT_HZ
>> 2849 bool
>> 2850 default y if !SYS_SUPPORTS_24HZ && \
>> 2851 !SYS_SUPPORTS_48HZ && \
>> 2852 !SYS_SUPPORTS_100HZ && \
>> 2853 !SYS_SUPPORTS_128HZ && \
>> 2854 !SYS_SUPPORTS_250HZ && \
>> 2855 !SYS_SUPPORTS_256HZ && \
>> 2856 !SYS_SUPPORTS_1000HZ && \
>> 2857 !SYS_SUPPORTS_1024HZ
>> 2858
>> 2859 config HZ
>> 2860 int
>> 2861 default 24 if HZ_24
>> 2862 default 48 if HZ_48
>> 2863 default 100 if HZ_100
>> 2864 default 128 if HZ_128
>> 2865 default 250 if HZ_250
>> 2866 default 256 if HZ_256
>> 2867 default 1000 if HZ_1000
>> 2868 default 1024 if HZ_1024
>> 2869
>> 2870 config SCHED_HRTICK
>> 2871 def_bool HIGH_RES_TIMERS
98 2872
99 config ARCH_SUPPORTS_KEXEC 2873 config ARCH_SUPPORTS_KEXEC
100 def_bool M68KCLASSIC && MMU !! 2874 def_bool y
>> 2875
>> 2876 config ARCH_SUPPORTS_CRASH_DUMP
>> 2877 def_bool y
101 2878
102 config BOOTINFO_PROC !! 2879 config PHYSICAL_START
103 bool "Export bootinfo in procfs" !! 2880 hex "Physical address where the kernel is loaded"
104 depends on KEXEC && M68KCLASSIC !! 2881 default "0xffffffff84000000"
>> 2882 depends on CRASH_DUMP
105 help 2883 help
106 Say Y to export the bootinfo used to !! 2884 This gives the CKSEG0 or KSEG0 address where the kernel is loaded.
107 "bootinfo" file in procfs. This is !! 2885 If you plan to use kernel for capturing the crash dump change
>> 2886 this value to start of the reserved region (the "X" value as
>> 2887 specified in the "crashkernel=YM@XM" command line boot parameter
>> 2888 passed to the panic-ed kernel).
>> 2889
>> 2890 config MIPS_O32_FP64_SUPPORT
>> 2891 bool "Support for O32 binaries using 64-bit FP" if !CPU_MIPSR6
>> 2892 depends on 32BIT || MIPS32_O32
>> 2893 help
>> 2894 When this is enabled, the kernel will support use of 64-bit floating
>> 2895 point registers with binaries using the O32 ABI along with the
>> 2896 EF_MIPS_FP64 ELF header flag (typically built with -mfp64). On
>> 2897 32-bit MIPS systems this support is at the cost of increasing the
>> 2898 size and complexity of the compiled FPU emulator. Thus if you are
>> 2899 running a MIPS32 system and know that none of your userland binaries
>> 2900 will require 64-bit floating point, you may wish to reduce the size
>> 2901 of your kernel & potentially improve FP emulation performance by
>> 2902 saying N here.
>> 2903
>> 2904 Although binutils currently supports use of this flag the details
>> 2905 concerning its effect upon the O32 ABI in userland are still being
>> 2906 worked on. In order to avoid userland becoming dependent upon current
>> 2907 behaviour before the details have been finalised, this option should
>> 2908 be considered experimental and only enabled by those working upon
>> 2909 said details.
>> 2910
>> 2911 If unsure, say N.
108 2912
109 menu "Platform setup" !! 2913 config USE_OF
>> 2914 bool
>> 2915 select OF
>> 2916 select OF_EARLY_FLATTREE
>> 2917 select IRQ_DOMAIN
110 2918
111 source "arch/m68k/Kconfig.cpu" !! 2919 config UHI_BOOT
>> 2920 bool
112 2921
113 source "arch/m68k/Kconfig.machine" !! 2922 config BUILTIN_DTB
>> 2923 bool
114 2924
115 source "arch/m68k/Kconfig.bus" !! 2925 choice
>> 2926 prompt "Kernel appended dtb support"
>> 2927 depends on USE_OF
>> 2928 default MIPS_NO_APPENDED_DTB
>> 2929
>> 2930 config MIPS_NO_APPENDED_DTB
>> 2931 bool "None"
>> 2932 help
>> 2933 Do not enable appended dtb support.
>> 2934
>> 2935 config MIPS_ELF_APPENDED_DTB
>> 2936 bool "vmlinux"
>> 2937 help
>> 2938 With this option, the boot code will look for a device tree binary
>> 2939 DTB) included in the vmlinux ELF section .appended_dtb. By default
>> 2940 it is empty and the DTB can be appended using binutils command
>> 2941 objcopy:
>> 2942
>> 2943 objcopy --update-section .appended_dtb=<filename>.dtb vmlinux
>> 2944
>> 2945 This is meant as a backward compatibility convenience for those
>> 2946 systems with a bootloader that can't be upgraded to accommodate
>> 2947 the documented boot protocol using a device tree.
>> 2948
>> 2949 config MIPS_RAW_APPENDED_DTB
>> 2950 bool "vmlinux.bin or vmlinuz.bin"
>> 2951 help
>> 2952 With this option, the boot code will look for a device tree binary
>> 2953 DTB) appended to raw vmlinux.bin or vmlinuz.bin.
>> 2954 (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb).
>> 2955
>> 2956 This is meant as a backward compatibility convenience for those
>> 2957 systems with a bootloader that can't be upgraded to accommodate
>> 2958 the documented boot protocol using a device tree.
>> 2959
>> 2960 Beware that there is very little in terms of protection against
>> 2961 this option being confused by leftover garbage in memory that might
>> 2962 look like a DTB header after a reboot if no actual DTB is appended
>> 2963 to vmlinux.bin. Do not leave this option active in a production kernel
>> 2964 if you don't intend to always append a DTB.
>> 2965 endchoice
>> 2966
>> 2967 choice
>> 2968 prompt "Kernel command line type"
>> 2969 depends on !CMDLINE_OVERRIDE
>> 2970 default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
>> 2971 !MACH_LOONGSON64 && !MIPS_MALTA && \
>> 2972 !CAVIUM_OCTEON_SOC
>> 2973 default MIPS_CMDLINE_FROM_BOOTLOADER
>> 2974
>> 2975 config MIPS_CMDLINE_FROM_DTB
>> 2976 depends on USE_OF
>> 2977 bool "Dtb kernel arguments if available"
>> 2978
>> 2979 config MIPS_CMDLINE_DTB_EXTEND
>> 2980 depends on USE_OF
>> 2981 bool "Extend dtb kernel arguments with bootloader arguments"
>> 2982
>> 2983 config MIPS_CMDLINE_FROM_BOOTLOADER
>> 2984 bool "Bootloader kernel arguments if available"
>> 2985
>> 2986 config MIPS_CMDLINE_BUILTIN_EXTEND
>> 2987 depends on CMDLINE_BOOL
>> 2988 bool "Extend builtin kernel arguments with bootloader arguments"
>> 2989 endchoice
116 2990
117 endmenu 2991 endmenu
118 2992
119 menu "Kernel Features" !! 2993 config LOCKDEP_SUPPORT
>> 2994 bool
>> 2995 default y
>> 2996
>> 2997 config STACKTRACE_SUPPORT
>> 2998 bool
>> 2999 default y
>> 3000
>> 3001 config PGTABLE_LEVELS
>> 3002 int
>> 3003 default 4 if PAGE_SIZE_4KB && MIPS_VA_BITS_48
>> 3004 default 3 if 64BIT && (!PAGE_SIZE_64KB || MIPS_VA_BITS_48)
>> 3005 default 2
>> 3006
>> 3007 config MIPS_AUTO_PFN_OFFSET
>> 3008 bool
>> 3009
>> 3010 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
>> 3011
>> 3012 config PCI_DRIVERS_GENERIC
>> 3013 select PCI_DOMAINS_GENERIC if PCI
>> 3014 bool
>> 3015
>> 3016 config PCI_DRIVERS_LEGACY
>> 3017 def_bool !PCI_DRIVERS_GENERIC
>> 3018 select NO_GENERIC_PCI_IOPORT_MAP
>> 3019 select PCI_DOMAINS if PCI
>> 3020
>> 3021 #
>> 3022 # ISA support is now enabled via select. Too many systems still have the one
>> 3023 # or other ISA chip on the board that users don't know about so don't expect
>> 3024 # users to choose the right thing ...
>> 3025 #
>> 3026 config ISA
>> 3027 bool
>> 3028
>> 3029 config TC
>> 3030 bool "TURBOchannel support"
>> 3031 depends on MACH_DECSTATION
>> 3032 help
>> 3033 TURBOchannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
>> 3034 processors. TURBOchannel programming specifications are available
>> 3035 at:
>> 3036 <ftp://ftp.hp.com/pub/alphaserver/archive/triadd/>
>> 3037 and:
>> 3038 <http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/>
>> 3039 Linux driver support status is documented at:
>> 3040 <http://www.linux-mips.org/wiki/DECstation>
>> 3041
>> 3042 config MMU
>> 3043 bool
>> 3044 default y
>> 3045
>> 3046 config ARCH_MMAP_RND_BITS_MIN
>> 3047 default 12 if 64BIT
>> 3048 default 8
120 3049
>> 3050 config ARCH_MMAP_RND_BITS_MAX
>> 3051 default 18 if 64BIT
>> 3052 default 15
>> 3053
>> 3054 config ARCH_MMAP_RND_COMPAT_BITS_MIN
>> 3055 default 8
>> 3056
>> 3057 config ARCH_MMAP_RND_COMPAT_BITS_MAX
>> 3058 default 15
>> 3059
>> 3060 config I8253
>> 3061 bool
>> 3062 select CLKSRC_I8253
>> 3063 select CLKEVT_I8253
>> 3064 select MIPS_EXTERNAL_TIMER
121 endmenu 3065 endmenu
122 3066
123 if !MMU !! 3067 config TRAD_SIGNALS
124 menu "Power management options" !! 3068 bool
>> 3069
>> 3070 config MIPS32_COMPAT
>> 3071 bool
>> 3072
>> 3073 config COMPAT
>> 3074 bool
125 3075
126 config PM !! 3076 config MIPS32_O32
127 bool "Power Management support" !! 3077 bool "Kernel support for o32 binaries"
>> 3078 depends on 64BIT
>> 3079 select ARCH_WANT_OLD_COMPAT_IPC
>> 3080 select COMPAT
>> 3081 select MIPS32_COMPAT
128 help 3082 help
129 Support processor power management m !! 3083 Select this option if you want to run o32 binaries. These are pure
>> 3084 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of
>> 3085 existing binaries are in this format.
>> 3086
>> 3087 If unsure, say Y.
>> 3088
>> 3089 config MIPS32_N32
>> 3090 bool "Kernel support for n32 binaries"
>> 3091 depends on 64BIT
>> 3092 select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
>> 3093 select COMPAT
>> 3094 select MIPS32_COMPAT
>> 3095 help
>> 3096 Select this option if you want to run n32 binaries. These are
>> 3097 64-bit binaries using 32-bit quantities for addressing and certain
>> 3098 data that would normally be 64-bit. They are used in special
>> 3099 cases.
>> 3100
>> 3101 If unsure, say N.
>> 3102
>> 3103 config CC_HAS_MNO_BRANCH_LIKELY
>> 3104 def_bool y
>> 3105 depends on $(cc-option,-mno-branch-likely)
>> 3106
>> 3107 # https://github.com/llvm/llvm-project/issues/61045
>> 3108 config CC_HAS_BROKEN_INLINE_COMPAT_BRANCH
>> 3109 def_bool y if CC_IS_CLANG
>> 3110
>> 3111 menu "Power management options"
>> 3112
>> 3113 config ARCH_HIBERNATION_POSSIBLE
>> 3114 def_bool y
>> 3115 depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
>> 3116
>> 3117 config ARCH_SUSPEND_POSSIBLE
>> 3118 def_bool y
>> 3119 depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
>> 3120
>> 3121 source "kernel/power/Kconfig"
>> 3122
>> 3123 endmenu
>> 3124
>> 3125 config MIPS_EXTERNAL_TIMER
>> 3126 bool
>> 3127
>> 3128 menu "CPU Power Management"
>> 3129
>> 3130 if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
>> 3131 source "drivers/cpufreq/Kconfig"
>> 3132 endif # CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
>> 3133
>> 3134 source "drivers/cpuidle/Kconfig"
130 3135
131 endmenu 3136 endmenu
132 endif <<
133 3137
134 source "arch/m68k/Kconfig.devices" !! 3138 source "arch/mips/kvm/Kconfig"
>> 3139
>> 3140 source "arch/mips/vdso/Kconfig"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.