1 # SPDX-License-Identifier: GPL-2.0-only <<
2 # <<
3 # For a description of the syntax of this conf <<
4 # see Documentation/kbuild/kconfig-language.rs <<
5 # <<
6 <<
7 config 64BIT 1 config 64BIT
8 bool !! 2 bool "64-bit kernel" if ARCH = "sparc"
>> 3 default ARCH = "sparc64"
>> 4 help
>> 5 SPARC is a family of RISC microprocessors designed and marketed by
>> 6 Sun Microsystems, incorporated. They are very widely found in Sun
>> 7 workstations and clones.
9 8
10 config 32BIT !! 9 Say yes to build a 64-bit kernel - formerly known as sparc64
11 bool !! 10 Say no to build a 32-bit kernel - formerly known as sparc
12 11
13 config RISCV !! 12 config SPARC
14 def_bool y !! 13 bool
15 select ACPI_GENERIC_GSI if ACPI !! 14 default y
16 select ACPI_MCFG if (ACPI && PCI) !! 15 select ARCH_MIGHT_HAVE_PC_PARPORT if SPARC64 && PCI
17 select ACPI_PPTT if ACPI !! 16 select ARCH_MIGHT_HAVE_PC_SERIO
18 select ACPI_REDUCED_HARDWARE_ONLY if A !! 17 select OF
19 select ACPI_SPCR_TABLE if ACPI !! 18 select OF_PROMTREE
20 select ARCH_DMA_DEFAULT_COHERENT !! 19 select HAVE_IDE
21 select ARCH_ENABLE_HUGEPAGE_MIGRATION !! 20 select HAVE_OPROFILE
22 select ARCH_ENABLE_MEMORY_HOTPLUG if S !! 21 select HAVE_ARCH_KGDB if !SMP || SPARC64
23 select ARCH_ENABLE_MEMORY_HOTREMOVE if !! 22 select HAVE_ARCH_TRACEHOOK
24 select ARCH_ENABLE_SPLIT_PMD_PTLOCK if !! 23 select HAVE_EXIT_THREAD
25 select ARCH_ENABLE_THP_MIGRATION if TR !! 24 select SYSCTL_EXCEPTION_TRACE
26 select ARCH_HAS_BINFMT_FLAT !! 25 select RTC_CLASS
27 select ARCH_HAS_CURRENT_STACK_POINTER !! 26 select RTC_DRV_M48T59
28 select ARCH_HAS_DEBUG_VIRTUAL if MMU !! 27 select RTC_SYSTOHC
29 select ARCH_HAS_DEBUG_VM_PGTABLE !! 28 select HAVE_DMA_API_DEBUG
30 select ARCH_HAS_DEBUG_WX !! 29 select HAVE_ARCH_JUMP_LABEL if SPARC64
31 select ARCH_HAS_FAST_MULTIPLIER <<
32 select ARCH_HAS_FORTIFY_SOURCE <<
33 select ARCH_HAS_GCOV_PROFILE_ALL <<
34 select ARCH_HAS_GIGANTIC_PAGE <<
35 select ARCH_HAS_KCOV <<
36 select ARCH_HAS_KERNEL_FPU_SUPPORT if <<
37 select ARCH_HAS_MEMBARRIER_CALLBACKS <<
38 select ARCH_HAS_MEMBARRIER_SYNC_CORE <<
39 select ARCH_HAS_MMIOWB <<
40 select ARCH_HAS_NON_OVERLAPPING_ADDRES <<
41 select ARCH_HAS_PMEM_API <<
42 select ARCH_HAS_PREPARE_SYNC_CORE_CMD <<
43 select ARCH_HAS_PTE_DEVMAP if 64BIT && <<
44 select ARCH_HAS_PTE_SPECIAL <<
45 select ARCH_HAS_SET_DIRECT_MAP if MMU <<
46 select ARCH_HAS_SET_MEMORY if MMU <<
47 select ARCH_HAS_STRICT_KERNEL_RWX if M <<
48 select ARCH_HAS_STRICT_MODULE_RWX if M <<
49 select ARCH_HAS_SYNC_CORE_BEFORE_USERM <<
50 select ARCH_HAS_SYSCALL_WRAPPER <<
51 select ARCH_HAS_TICK_BROADCAST if GENE <<
52 select ARCH_HAS_UBSAN <<
53 select ARCH_HAS_VDSO_DATA <<
54 select ARCH_KEEP_MEMBLOCK if ACPI <<
55 select ARCH_MHP_MEMMAP_ON_MEMORY_ENABL <<
56 select ARCH_OPTIONAL_KERNEL_RWX if ARC <<
57 select ARCH_OPTIONAL_KERNEL_RWX_DEFAUL <<
58 select ARCH_STACKWALK <<
59 select ARCH_SUPPORTS_ATOMIC_RMW <<
60 select ARCH_SUPPORTS_CFI_CLANG <<
61 select ARCH_SUPPORTS_DEBUG_PAGEALLOC i <<
62 select ARCH_SUPPORTS_HUGETLBFS if MMU <<
63 # LLD >= 14: https://github.com/llvm/l <<
64 select ARCH_SUPPORTS_LTO_CLANG if LLD_ <<
65 select ARCH_SUPPORTS_LTO_CLANG_THIN if <<
66 select ARCH_SUPPORTS_PAGE_TABLE_CHECK <<
67 select ARCH_SUPPORTS_PER_VMA_LOCK if M <<
68 select ARCH_SUPPORTS_RT <<
69 select ARCH_SUPPORTS_SHADOW_CALL_STACK <<
70 select ARCH_USE_CMPXCHG_LOCKREF if 64B <<
71 select ARCH_USE_MEMTEST <<
72 select ARCH_USE_QUEUED_RWLOCKS <<
73 select ARCH_USE_SYM_ANNOTATIONS <<
74 select ARCH_USES_CFI_TRAPS if CFI_CLAN <<
75 select ARCH_WANT_BATCHED_UNMAP_TLB_FLU <<
76 select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_ <<
77 select ARCH_WANT_FRAME_POINTERS <<
78 select ARCH_WANT_GENERAL_HUGETLB if !R <<
79 select ARCH_WANT_HUGE_PMD_SHARE if 64B <<
80 select ARCH_WANT_LD_ORPHAN_WARN if !XI <<
81 select ARCH_WANT_OPTIMIZE_DAX_VMEMMAP <<
82 select ARCH_WANT_OPTIMIZE_HUGETLB_VMEM <<
83 select ARCH_WANTS_NO_INSTR <<
84 select ARCH_WANTS_THP_SWAP if HAVE_ARC <<
85 select BINFMT_FLAT_NO_DATA_START_OFFSE <<
86 select BUILDTIME_TABLE_SORT if MMU <<
87 select CLINT_TIMER if RISCV_M_MODE <<
88 select CLONE_BACKWARDS <<
89 select COMMON_CLK <<
90 select CPU_PM if CPU_IDLE || HIBERNATI <<
91 select EDAC_SUPPORT <<
92 select FRAME_POINTER if PERF_EVENTS || <<
93 select FTRACE_MCOUNT_USE_PATCHABLE_FUN <<
94 select GENERIC_ARCH_TOPOLOGY <<
95 select GENERIC_ATOMIC64 if !64BIT <<
96 select GENERIC_CLOCKEVENTS_BROADCAST i <<
97 select GENERIC_CPU_DEVICES <<
98 select GENERIC_CPU_VULNERABILITIES <<
99 select GENERIC_EARLY_IOREMAP <<
100 select GENERIC_ENTRY <<
101 select GENERIC_GETTIMEOFDAY if HAVE_GE <<
102 select GENERIC_IDLE_POLL_SETUP <<
103 select GENERIC_IOREMAP if MMU <<
104 select GENERIC_IRQ_IPI if SMP <<
105 select GENERIC_IRQ_IPI_MUX if SMP <<
106 select GENERIC_IRQ_MULTI_HANDLER <<
107 select GENERIC_IRQ_SHOW 30 select GENERIC_IRQ_SHOW
108 select GENERIC_IRQ_SHOW_LEVEL !! 31 select ARCH_WANT_IPC_PARSE_VERSION
109 select GENERIC_LIB_DEVMEM_IS_ALLOWED <<
110 select GENERIC_PCI_IOMAP 32 select GENERIC_PCI_IOMAP
111 select GENERIC_PTDUMP if MMU !! 33 select HAVE_NMI_WATCHDOG if SPARC64
112 select GENERIC_SCHED_CLOCK !! 34 select HAVE_CBPF_JIT
>> 35 select HAVE_DEBUG_BUGVERBOSE
113 select GENERIC_SMP_IDLE_THREAD 36 select GENERIC_SMP_IDLE_THREAD
114 select GENERIC_TIME_VSYSCALL if MMU && !! 37 select GENERIC_CLOCKEVENTS
115 select GENERIC_VDSO_TIME_NS if HAVE_GE !! 38 select GENERIC_STRNCPY_FROM_USER
116 select HARDIRQS_SW_RESEND !! 39 select GENERIC_STRNLEN_USER
117 select HAS_IOPORT if MMU !! 40 select MODULES_USE_ELF_RELA
118 select HAVE_ARCH_AUDITSYSCALL !! 41 select ODD_RT_SIGACTION
119 select HAVE_ARCH_HUGE_VMALLOC if HAVE_ !! 42 select OLD_SIGSUSPEND
120 select HAVE_ARCH_HUGE_VMAP if MMU && 6 !! 43 select ARCH_HAS_SG_CHAIN
121 select HAVE_ARCH_JUMP_LABEL if !XIP_KE !! 44 select CPU_NO_EFFICIENT_FFS
122 select HAVE_ARCH_JUMP_LABEL_RELATIVE i !! 45 select HAVE_ARCH_HARDENED_USERCOPY
123 select HAVE_ARCH_KASAN if MMU && 64BIT !! 46 select PROVE_LOCKING_SMALL if PROVE_LOCKING
124 select HAVE_ARCH_KASAN_VMALLOC if MMU !! 47
125 select HAVE_ARCH_KFENCE if MMU && 64BI !! 48 config SPARC32
126 select HAVE_ARCH_KGDB if !XIP_KERNEL !! 49 def_bool !64BIT
127 select HAVE_ARCH_KGDB_QXFER_PKT !! 50 select GENERIC_ATOMIC64
128 select HAVE_ARCH_MMAP_RND_BITS if MMU !! 51 select CLZ_TAB
129 select HAVE_ARCH_MMAP_RND_COMPAT_BITS !! 52 select HAVE_UID16
130 select HAVE_ARCH_RANDOMIZE_KSTACK_OFFS !! 53 select OLD_SIGACTION
131 select HAVE_ARCH_SECCOMP_FILTER !! 54
132 select HAVE_ARCH_STACKLEAK !! 55 config SPARC64
133 select HAVE_ARCH_THREAD_STRUCT_WHITELI !! 56 def_bool 64BIT
134 select HAVE_ARCH_TRACEHOOK !! 57 select HAVE_FUNCTION_TRACER
135 select HAVE_ARCH_TRANSPARENT_HUGEPAGE <<
136 select HAVE_ARCH_USERFAULTFD_MINOR if <<
137 select HAVE_ARCH_VMAP_STACK if MMU && <<
138 select HAVE_ASM_MODVERSIONS <<
139 select HAVE_CONTEXT_TRACKING_USER <<
140 select HAVE_DEBUG_KMEMLEAK <<
141 select HAVE_DMA_CONTIGUOUS if MMU <<
142 select HAVE_DYNAMIC_FTRACE if !XIP_KER <<
143 select HAVE_DYNAMIC_FTRACE_WITH_DIRECT <<
144 select HAVE_DYNAMIC_FTRACE_WITH_ARGS i <<
145 select HAVE_FTRACE_MCOUNT_RECORD if !X <<
146 select HAVE_FUNCTION_GRAPH_TRACER 58 select HAVE_FUNCTION_GRAPH_TRACER
147 select HAVE_FUNCTION_GRAPH_RETVAL if H !! 59 select HAVE_KRETPROBES
148 select HAVE_FUNCTION_TRACER if !XIP_KE !! 60 select HAVE_KPROBES
149 select HAVE_EBPF_JIT if MMU !! 61 select HAVE_RCU_TABLE_FREE if SMP
150 select HAVE_GUP_FAST if MMU !! 62 select HAVE_MEMBLOCK
151 select HAVE_FUNCTION_ARG_ACCESS_API !! 63 select HAVE_MEMBLOCK_NODE_MAP
152 select HAVE_FUNCTION_ERROR_INJECTION !! 64 select HAVE_ARCH_TRANSPARENT_HUGEPAGE
153 select HAVE_GCC_PLUGINS !! 65 select HAVE_DYNAMIC_FTRACE
154 select HAVE_GENERIC_VDSO if MMU && 64B !! 66 select HAVE_FTRACE_MCOUNT_RECORD
155 select HAVE_IRQ_TIME_ACCOUNTING <<
156 select HAVE_KERNEL_BZIP2 if !XIP_KERNE <<
157 select HAVE_KERNEL_GZIP if !XIP_KERNEL <<
158 select HAVE_KERNEL_LZ4 if !XIP_KERNEL <<
159 select HAVE_KERNEL_LZMA if !XIP_KERNEL <<
160 select HAVE_KERNEL_LZO if !XIP_KERNEL <<
161 select HAVE_KERNEL_UNCOMPRESSED if !XI <<
162 select HAVE_KERNEL_ZSTD if !XIP_KERNEL <<
163 select HAVE_KERNEL_XZ if !XIP_KERNEL & <<
164 select HAVE_KPROBES if !XIP_KERNEL <<
165 select HAVE_KRETPROBES if !XIP_KERNEL <<
166 # https://github.com/ClangBuiltLinux/l <<
167 select HAVE_LD_DEAD_CODE_DATA_ELIMINAT <<
168 select HAVE_MOVE_PMD <<
169 select HAVE_MOVE_PUD <<
170 select HAVE_PAGE_SIZE_4KB <<
171 select HAVE_PCI <<
172 select HAVE_PERF_EVENTS <<
173 select HAVE_PERF_REGS <<
174 select HAVE_PERF_USER_STACK_DUMP <<
175 select HAVE_POSIX_CPU_TIMERS_TASK_WORK <<
176 select HAVE_PREEMPT_DYNAMIC_KEY if !XI <<
177 select HAVE_REGS_AND_STACK_ACCESS_API <<
178 select HAVE_RETHOOK if !XIP_KERNEL <<
179 select HAVE_RSEQ <<
180 select HAVE_RUST if RUSTC_SUPPORTS_RIS <<
181 select HAVE_SAMPLE_FTRACE_DIRECT <<
182 select HAVE_SAMPLE_FTRACE_DIRECT_MULTI <<
183 select HAVE_STACKPROTECTOR <<
184 select HAVE_SYSCALL_TRACEPOINTS 67 select HAVE_SYSCALL_TRACEPOINTS
185 select HOTPLUG_CORE_SYNC_DEAD if HOTPL !! 68 select HAVE_CONTEXT_TRACKING
186 select IRQ_DOMAIN !! 69 select HAVE_DEBUG_KMEMLEAK
187 select IRQ_FORCED_THREADING <<
188 select KASAN_VMALLOC if KASAN <<
189 select LOCK_MM_AND_FIND_VMA <<
190 select MMU_GATHER_RCU_TABLE_FREE if SM <<
191 select MODULES_USE_ELF_RELA if MODULES <<
192 select OF <<
193 select OF_EARLY_FLATTREE <<
194 select OF_IRQ <<
195 select PCI_DOMAINS_GENERIC if PCI <<
196 select PCI_ECAM if (ACPI && PCI) <<
197 select PCI_MSI if PCI <<
198 select RISCV_ALTERNATIVE if !XIP_KERNE <<
199 select RISCV_APLIC <<
200 select RISCV_IMSIC <<
201 select RISCV_INTC <<
202 select RISCV_TIMER if RISCV_SBI <<
203 select SIFIVE_PLIC <<
204 select SPARSE_IRQ 70 select SPARSE_IRQ
205 select SYSCTL_EXCEPTION_TRACE !! 71 select RTC_DRV_CMOS
206 select THREAD_INFO_IN_TASK !! 72 select RTC_DRV_BQ4802
207 select TRACE_IRQFLAGS_SUPPORT !! 73 select RTC_DRV_SUN4V
208 select UACCESS_MEMCPY if !MMU !! 74 select RTC_DRV_STARFIRE
209 select USER_STACKTRACE_SUPPORT !! 75 select HAVE_PERF_EVENTS
210 select ZONE_DMA32 if 64BIT !! 76 select PERF_USE_VMALLOC
211 !! 77 select IRQ_PREFLOW_FASTEOI
212 config RUSTC_SUPPORTS_RISCV !! 78 select ARCH_HAVE_NMI_SAFE_CMPXCHG
213 def_bool y !! 79 select HAVE_C_RECORDMCOUNT
214 depends on 64BIT !! 80 select NO_BOOTMEM
215 # Shadow call stack requires rustc ver !! 81 select HAVE_ARCH_AUDITSYSCALL
216 # -Zsanitizer=shadow-call-stack flag. !! 82 select ARCH_SUPPORTS_ATOMIC_RMW
217 depends on !SHADOW_CALL_STACK || RUSTC !! 83 select HAVE_NMI
218 <<
219 config CLANG_SUPPORTS_DYNAMIC_FTRACE <<
220 def_bool CC_IS_CLANG <<
221 # https://github.com/ClangBuiltLinux/l <<
222 depends on AS_IS_GNU || (AS_IS_LLVM && <<
223 <<
224 config GCC_SUPPORTS_DYNAMIC_FTRACE <<
225 def_bool CC_IS_GCC <<
226 depends on $(cc-option,-fpatchable-fun <<
227 <<
228 config HAVE_SHADOW_CALL_STACK <<
229 def_bool $(cc-option,-fsanitize=shadow <<
230 # https://github.com/riscv-non-isa/ris <<
231 depends on $(ld-option,--no-relax-gp) <<
232 84
233 config RISCV_USE_LINKER_RELAXATION !! 85 config ARCH_DEFCONFIG
234 def_bool y !! 86 string
235 # https://github.com/llvm/llvm-project !! 87 default "arch/sparc/configs/sparc32_defconfig" if SPARC32
236 depends on !LD_IS_LLD || LLD_VERSION > !! 88 default "arch/sparc/configs/sparc64_defconfig" if SPARC64
237 89
238 # https://github.com/llvm/llvm-project/commit/ !! 90 config ARCH_PROC_KCORE_TEXT
239 config ARCH_HAS_BROKEN_DWARF5 <<
240 def_bool y 91 def_bool y
241 depends on RISCV_USE_LINKER_RELAXATION <<
242 # https://github.com/llvm/llvm-project <<
243 depends on AS_IS_LLVM && AS_VERSION < <<
244 # https://github.com/llvm/llvm-project <<
245 depends on LD_IS_LLD && LLD_VERSION < <<
246 <<
247 config ARCH_MMAP_RND_BITS_MIN <<
248 default 18 if 64BIT <<
249 default 8 <<
250 <<
251 config ARCH_MMAP_RND_COMPAT_BITS_MIN <<
252 default 8 <<
253 <<
254 # max bits determined by the following formula <<
255 # VA_BITS - PAGE_SHIFT - 3 <<
256 config ARCH_MMAP_RND_BITS_MAX <<
257 default 24 if 64BIT # SV39 based <<
258 default 17 <<
259 <<
260 config ARCH_MMAP_RND_COMPAT_BITS_MAX <<
261 default 17 <<
262 <<
263 # set if we run in machine mode, cleared if we <<
264 config RISCV_M_MODE <<
265 bool "Build a kernel that runs in mach <<
266 depends on !MMU <<
267 default y <<
268 help <<
269 Select this option if you want to ru <<
270 without the assistance of any other <<
271 92
272 # set if we are running in S-mode and can use !! 93 config ARCH_ATU
273 config RISCV_SBI <<
274 bool 94 bool
275 depends on !RISCV_M_MODE !! 95 default y if SPARC64
276 default y <<
277 <<
278 config MMU <<
279 bool "MMU-based Paged Memory Managemen <<
280 default y <<
281 help <<
282 Select if you want MMU-based virtual <<
283 support by paged memory management. <<
284 <<
285 config PAGE_OFFSET <<
286 hex <<
287 default 0x80000000 if !MMU && RISCV_M_ <<
288 default 0x80200000 if !MMU <<
289 default 0xc0000000 if 32BIT <<
290 default 0xff60000000000000 if 64BIT <<
291 <<
292 config KASAN_SHADOW_OFFSET <<
293 hex <<
294 depends on KASAN_GENERIC <<
295 default 0xdfffffff00000000 if 64BIT <<
296 default 0xffffffff if 32BIT <<
297 96
298 config ARCH_FLATMEM_ENABLE !! 97 config ARCH_DMA_ADDR_T_64BIT
299 def_bool !NUMA !! 98 bool
300 !! 99 default y if ARCH_ATU
301 config ARCH_SPARSEMEM_ENABLE <<
302 def_bool y <<
303 depends on MMU <<
304 select SPARSEMEM_STATIC if 32BIT && SP <<
305 select SPARSEMEM_VMEMMAP_ENABLE if 64B <<
306 <<
307 config ARCH_SELECT_MEMORY_MODEL <<
308 def_bool ARCH_SPARSEMEM_ENABLE <<
309 100
310 config ARCH_SUPPORTS_UPROBES !! 101 config IOMMU_HELPER
311 def_bool y !! 102 bool
>> 103 default y if SPARC64
312 104
313 config STACKTRACE_SUPPORT 105 config STACKTRACE_SUPPORT
314 def_bool y <<
315 <<
316 config GENERIC_BUG <<
317 def_bool y <<
318 depends on BUG <<
319 select GENERIC_BUG_RELATIVE_POINTERS i <<
320 <<
321 config GENERIC_BUG_RELATIVE_POINTERS <<
322 bool 106 bool
>> 107 default y if SPARC64
323 108
324 config GENERIC_CALIBRATE_DELAY !! 109 config LOCKDEP_SUPPORT
325 def_bool y !! 110 bool
>> 111 default y if SPARC64
326 112
327 config GENERIC_CSUM !! 113 config ARCH_HIBERNATION_POSSIBLE
328 def_bool y !! 114 def_bool y if SPARC64
329 115
330 config GENERIC_HWEIGHT !! 116 config AUDIT_ARCH
331 def_bool y !! 117 bool
>> 118 default y
332 119
333 config FIX_EARLYCON_MEM !! 120 config HAVE_SETUP_PER_CPU_AREA
334 def_bool MMU !! 121 def_bool y if SPARC64
335 122
336 config ILLEGAL_POINTER_VALUE !! 123 config NEED_PER_CPU_EMBED_FIRST_CHUNK
337 hex !! 124 def_bool y if SPARC64
338 default 0 if 32BIT <<
339 default 0xdead000000000000 if 64BIT <<
340 125
341 config PGTABLE_LEVELS !! 126 config NEED_PER_CPU_PAGE_FIRST_CHUNK
342 int !! 127 def_bool y if SPARC64
343 default 5 if 64BIT <<
344 default 2 <<
345 128
346 config LOCKDEP_SUPPORT !! 129 config MMU
347 def_bool y !! 130 bool
>> 131 default y
348 132
349 config RISCV_DMA_NONCOHERENT !! 133 config HIGHMEM
350 bool 134 bool
351 select ARCH_HAS_DMA_PREP_COHERENT !! 135 default y if SPARC32
352 select ARCH_HAS_SETUP_DMA_OPS <<
353 select ARCH_HAS_SYNC_DMA_FOR_CPU <<
354 select ARCH_HAS_SYNC_DMA_FOR_DEVICE <<
355 select DMA_BOUNCE_UNALIGNED_KMALLOC if <<
356 136
357 config RISCV_NONSTANDARD_CACHE_OPS !! 137 config ZONE_DMA
358 bool 138 bool
359 help !! 139 default y if SPARC32
360 This enables function pointer suppor <<
361 systems to handle cache management. <<
362 140
363 config AS_HAS_INSN !! 141 config NEED_DMA_MAP_STATE
364 def_bool $(as-instr,.insn r 51$(comma) !! 142 def_bool y
365 143
366 config AS_HAS_OPTION_ARCH !! 144 config NEED_SG_DMA_LENGTH
367 # https://github.com/llvm/llvm-project <<
368 def_bool y 145 def_bool y
369 depends on $(as-instr, .option arch$(c <<
370 146
371 source "arch/riscv/Kconfig.socs" !! 147 config GENERIC_ISA_DMA
372 source "arch/riscv/Kconfig.errata" !! 148 bool
>> 149 default y if SPARC32
373 150
374 menu "Platform type" !! 151 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
>> 152 def_bool y if SPARC64
375 153
376 config NONPORTABLE !! 154 config PGTABLE_LEVELS
377 bool "Allow configurations that result !! 155 default 4 if 64BIT
378 help !! 156 default 3
379 RISC-V kernel binaries are compatibl <<
380 whenever possible, but there are som <<
381 satisfied by configurations that res <<
382 not portable between systems. <<
383 <<
384 Selecting N does not guarantee kerne <<
385 systems. Selecting any of the optio <<
386 result in kernel binaries that are u <<
387 systems. <<
388 157
389 If unsure, say N. !! 158 config ARCH_SUPPORTS_UPROBES
>> 159 def_bool y if SPARC64
390 160
391 choice !! 161 source "init/Kconfig"
392 prompt "Base ISA" <<
393 default ARCH_RV64I <<
394 help <<
395 This selects the base ISA that this <<
396 the target platform. <<
397 162
398 config ARCH_RV32I !! 163 source "kernel/Kconfig.freezer"
399 bool "RV32I" <<
400 depends on NONPORTABLE <<
401 select 32BIT <<
402 select GENERIC_LIB_ASHLDI3 <<
403 select GENERIC_LIB_ASHRDI3 <<
404 select GENERIC_LIB_LSHRDI3 <<
405 select GENERIC_LIB_UCMPDI2 <<
406 <<
407 config ARCH_RV64I <<
408 bool "RV64I" <<
409 select 64BIT <<
410 select ARCH_SUPPORTS_INT128 if CC_HAS_ <<
411 select SWIOTLB if MMU <<
412 <<
413 endchoice <<
414 <<
415 # We must be able to map all physical memory i <<
416 # is still a bit more efficient when generatin <<
417 # such that it can only map 2GiB of memory. <<
418 choice <<
419 prompt "Kernel Code Model" <<
420 default CMODEL_MEDLOW if 32BIT <<
421 default CMODEL_MEDANY if 64BIT <<
422 <<
423 config CMODEL_MEDLOW <<
424 bool "medium low code model" <<
425 config CMODEL_MEDANY <<
426 bool "medium any code model" <<
427 endchoice <<
428 164
429 config MODULE_SECTIONS !! 165 menu "Processor type and features"
430 bool <<
431 select HAVE_MOD_ARCH_SPECIFIC <<
432 166
433 config SMP 167 config SMP
434 bool "Symmetric Multi-Processing" !! 168 bool "Symmetric multi-processing support"
435 help !! 169 ---help---
436 This enables support for systems wit !! 170 This enables support for systems with more than one CPU. If you have
437 you say N here, the kernel will run !! 171 a system with only one CPU, say N. If you have a system with more
438 multiprocessor machines, but will us !! 172 than one CPU, say Y.
439 multiprocessor machine. If you say Y !! 173
440 on many, but not all, single process !! 174 If you say N here, the kernel will run on uni- and multiprocessor
441 processor machine, the kernel will r !! 175 machines, but will use only one CPU of a multiprocessor machine. If
442 here. !! 176 you say Y here, the kernel will run on many, but not all,
>> 177 uniprocessor machines. On a uniprocessor machine, the kernel
>> 178 will run faster if you say N here.
>> 179
>> 180 People using multiprocessor machines who say Y here should also say
>> 181 Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
>> 182 Management" code will be disabled if you say Y here.
443 183
444 If you don't know what to do here, s !! 184 See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
>> 185 available at <http://www.tldp.org/docs.html#howto>.
445 186
446 config SCHED_MC !! 187 If you don't know what to do here, say N.
447 bool "Multi-core scheduler support" <<
448 depends on SMP <<
449 help <<
450 Multi-core scheduler support improve <<
451 making when dealing with multi-core <<
452 increased overhead in some places. I <<
453 188
454 config NR_CPUS 189 config NR_CPUS
455 int "Maximum number of CPUs (2-512)" !! 190 int "Maximum number of CPUs"
456 depends on SMP 191 depends on SMP
457 range 2 512 if !RISCV_SBI_V01 !! 192 range 2 32 if SPARC32
458 range 2 32 if RISCV_SBI_V01 && 32BIT !! 193 range 2 1024 if SPARC64
459 range 2 64 if RISCV_SBI_V01 && 64BIT !! 194 default 32 if SPARC32
460 default "32" if 32BIT !! 195 default 64 if SPARC64
461 default "64" if 64BIT <<
462 196
463 config HOTPLUG_CPU !! 197 source kernel/Kconfig.hz
464 bool "Support for hot-pluggable CPUs" <<
465 depends on SMP <<
466 select GENERIC_IRQ_MIGRATION <<
467 help <<
468 <<
469 Say Y here to experiment with turnin <<
470 can be controlled through /sys/devic <<
471 <<
472 Say N if you want to disable CPU hot <<
473 <<
474 choice <<
475 prompt "CPU Tuning" <<
476 default TUNE_GENERIC <<
477 <<
478 config TUNE_GENERIC <<
479 bool "generic" <<
480 <<
481 endchoice <<
482 <<
483 # Common NUMA Features <<
484 config NUMA <<
485 bool "NUMA Memory Allocation and Sched <<
486 depends on SMP && MMU <<
487 select ARCH_SUPPORTS_NUMA_BALANCING <<
488 select GENERIC_ARCH_NUMA <<
489 select HAVE_SETUP_PER_CPU_AREA <<
490 select NEED_PER_CPU_EMBED_FIRST_CHUNK <<
491 select NEED_PER_CPU_PAGE_FIRST_CHUNK <<
492 select OF_NUMA <<
493 select USE_PERCPU_NUMA_NODE_ID <<
494 help <<
495 Enable NUMA (Non-Uniform Memory Acce <<
496 198
497 The kernel will try to allocate memo !! 199 config RWSEM_GENERIC_SPINLOCK
498 local memory of the CPU and add some <<
499 <<
500 config NODES_SHIFT <<
501 int "Maximum NUMA Nodes (as a power of <<
502 range 1 10 <<
503 default "2" <<
504 depends on NUMA <<
505 help <<
506 Specify the maximum number of NUMA N <<
507 system. Increases memory reserved t <<
508 <<
509 config RISCV_ALTERNATIVE <<
510 bool 200 bool
511 depends on !XIP_KERNEL !! 201 default y if SPARC32
512 help <<
513 This Kconfig allows the kernel to au <<
514 erratum or cpufeature required by th <<
515 time. The code patching overhead is <<
516 once at boot and once on each module <<
517 202
518 config RISCV_ALTERNATIVE_EARLY !! 203 config RWSEM_XCHGADD_ALGORITHM
519 bool 204 bool
520 depends on RISCV_ALTERNATIVE !! 205 default y if SPARC64
521 help <<
522 Allows early patching of the kernel <<
523 206
524 config RISCV_ISA_C !! 207 config GENERIC_HWEIGHT
525 bool "Emit compressed instructions whe !! 208 bool
526 default y <<
527 help <<
528 Adds "C" to the ISA subsets that the <<
529 when building Linux, which results i <<
530 Linux binary. <<
531 <<
532 If you don't know what to do here, s <<
533 <<
534 config RISCV_ISA_SVNAPOT <<
535 bool "Svnapot extension support for su <<
536 depends on 64BIT && MMU <<
537 depends on RISCV_ALTERNATIVE <<
538 default y 209 default y
539 help <<
540 Allow kernel to detect the Svnapot I <<
541 time and enable its usage. <<
542 210
543 The Svnapot extension is used to mar !! 211 config GENERIC_CALIBRATE_DELAY
544 of contiguous virtual-to-physical tr !! 212 bool
545 aligned power-of-2 (NAPOT) granulari <<
546 size. When HUGETLBFS is also selecte <<
547 allocates some memory for each NAPOT <<
548 When optimizing for low memory consu <<
549 the Svnapot extension, it may be bet <<
550 <<
551 If you don't know what to do here, s <<
552 <<
553 config RISCV_ISA_SVPBMT <<
554 bool "Svpbmt extension support for sup <<
555 depends on 64BIT && MMU <<
556 depends on RISCV_ALTERNATIVE <<
557 default y 213 default y
558 help <<
559 Adds support to dynamically detect <<
560 ISA-extension (Supervisor-mode: pag <<
561 enable its usage. <<
562 <<
563 The memory type for a page contains <<
564 that indicate the cacheability, ide <<
565 properties for access to that page. <<
566 <<
567 The Svpbmt extension is only availa <<
568 <<
569 If you don't know what to do here, <<
570 214
571 config TOOLCHAIN_HAS_V !! 215 config ARCH_MAY_HAVE_PC_FDC
572 bool 216 bool
573 default y 217 default y
574 depends on !64BIT || $(cc-option,-mabi <<
575 depends on !32BIT || $(cc-option,-mabi <<
576 depends on LLD_VERSION >= 140000 || LD <<
577 depends on AS_HAS_OPTION_ARCH <<
578 218
579 config RISCV_ISA_V !! 219 config EMULATED_CMPXCHG
580 bool "VECTOR extension support" !! 220 bool
581 depends on TOOLCHAIN_HAS_V !! 221 default y if SPARC32
582 depends on FPU <<
583 select DYNAMIC_SIGFRAME <<
584 default y <<
585 help 222 help
586 Say N here if you want to disable al !! 223 Sparc32 does not have a CAS instruction like sparc64. cmpxchg()
587 in the kernel. !! 224 is emulated, and therefore it is not completely atomic.
588 <<
589 If you don't know what to do here, s <<
590 225
591 config RISCV_ISA_V_DEFAULT_ENABLE !! 226 # Makefile helpers
592 bool "Enable userspace Vector by defau !! 227 config SPARC32_SMP
593 depends on RISCV_ISA_V !! 228 bool
594 default y 229 default y
595 help !! 230 depends on SPARC32 && SMP
596 Say Y here if you want to enable Vec <<
597 Otherwise, userspace has to make exp <<
598 Vector, or enable it via the sysctl <<
599 <<
600 If you don't know what to do here, s <<
601 <<
602 config RISCV_ISA_V_UCOPY_THRESHOLD <<
603 int "Threshold size for vectorized use <<
604 depends on RISCV_ISA_V <<
605 default 768 <<
606 help <<
607 Prefer using vectorized copy_to_user <<
608 workload size exceeds this value. <<
609 231
610 config RISCV_ISA_V_PREEMPTIVE !! 232 config SPARC64_SMP
611 bool "Run kernel-mode Vector with kern !! 233 bool
612 depends on PREEMPTION <<
613 depends on RISCV_ISA_V <<
614 default y 234 default y
615 help !! 235 depends on SPARC64 && SMP
616 Usually, in-kernel SIMD routines are !! 236
617 Functions which envoke long running !! 237 config EARLYFB
618 vector unit to prevent blocking othe !! 238 bool "Support for early boot text console"
619 <<
620 This config allows kernel to run SIM <<
621 preemption. Enabling this config wil <<
622 consumption due to the allocation of <<
623 <<
624 config RISCV_ISA_ZAWRS <<
625 bool "Zawrs extension support for more <<
626 depends on RISCV_ALTERNATIVE <<
627 default y 239 default y
>> 240 depends on SPARC64
628 help 241 help
629 The Zawrs extension defines instruct !! 242 Say Y here to enable a faster early framebuffer boot console.
630 which allow a hart to enter a low-po <<
631 hypervisor while waiting on a store <<
632 use of these instructions in the ker <<
633 detected at boot. <<
634 <<
635 If you don't know what to do here, s <<
636 <<
637 config TOOLCHAIN_HAS_ZBB <<
638 bool <<
639 default y <<
640 depends on !64BIT || $(cc-option,-mabi <<
641 depends on !32BIT || $(cc-option,-mabi <<
642 depends on LLD_VERSION >= 150000 || LD <<
643 depends on AS_HAS_OPTION_ARCH <<
644 <<
645 # This symbol indicates that the toolchain sup <<
646 # extensions, including Zvk*, Zvbb, and Zvbc. <<
647 # binutils added all except Zvkb, then added Z <<
648 config TOOLCHAIN_HAS_VECTOR_CRYPTO <<
649 def_bool $(as-instr, .option arch$(com <<
650 depends on AS_HAS_OPTION_ARCH <<
651 243
652 config RISCV_ISA_ZBA !! 244 config SECCOMP
653 bool "Zba extension support for bit ma !! 245 bool "Enable seccomp to safely compute untrusted bytecode"
>> 246 depends on SPARC64 && PROC_FS
654 default y 247 default y
655 help 248 help
656 Add support for enabling optimisati !! 249 This kernel feature is useful for number crunching applications
657 extension is detected at boot. !! 250 that may need to compute untrusted bytecode during their
>> 251 execution. By using pipes or other transports made available to
>> 252 the process as file descriptors supporting the read/write
>> 253 syscalls, it's possible to isolate those applications in
>> 254 their own address space using seccomp. Once seccomp is
>> 255 enabled via /proc/<pid>/seccomp, it cannot be disabled
>> 256 and the task is only allowed to execute a few safe syscalls
>> 257 defined by each seccomp mode.
>> 258
>> 259 If unsure, say Y. Only embedded should say N here.
658 260
659 The Zba extension provides instruct !! 261 config HOTPLUG_CPU
660 of addresses that index into arrays !! 262 bool "Support for hot-pluggable CPUs"
>> 263 depends on SPARC64 && SMP
>> 264 help
>> 265 Say Y here to experiment with turning CPUs off and on. CPUs
>> 266 can be controlled through /sys/devices/system/cpu/cpu#.
>> 267 Say N if you want to disable CPU hotplug.
661 268
662 If you don't know what to do here, !! 269 if SPARC64
>> 270 source "drivers/cpufreq/Kconfig"
>> 271 endif
663 272
664 config RISCV_ISA_ZBB !! 273 config US3_MC
665 bool "Zbb extension support for bit ma !! 274 tristate "UltraSPARC-III Memory Controller driver"
666 depends on TOOLCHAIN_HAS_ZBB !! 275 depends on SPARC64
667 depends on RISCV_ALTERNATIVE <<
668 default y 276 default y
669 help 277 help
670 Adds support to dynamically detect !! 278 This adds a driver for the UltraSPARC-III memory controller.
671 extension (basic bit manipulation) !! 279 Loading this driver allows exact mnemonic strings to be
672 !! 280 printed in the event of a memory error, so that the faulty DIMM
673 The Zbb extension provides instruct !! 281 on the motherboard can be matched to the error.
674 of bit-specific operations (count b <<
675 bitrotation, etc). <<
676 282
677 If you don't know what to do here, !! 283 If in doubt, say Y, as this information can be very useful.
678 284
679 config TOOLCHAIN_HAS_ZBC !! 285 # Global things across all Sun machines.
>> 286 config GENERIC_LOCKBREAK
680 bool 287 bool
681 default y 288 default y
682 depends on !64BIT || $(cc-option,-mabi !! 289 depends on SPARC64 && SMP && PREEMPT
683 depends on !32BIT || $(cc-option,-mabi <<
684 depends on LLD_VERSION >= 150000 || LD <<
685 depends on AS_HAS_OPTION_ARCH <<
686 290
687 config RISCV_ISA_ZBC !! 291 config NUMA
688 bool "Zbc extension support for carry- !! 292 bool "NUMA support"
689 depends on TOOLCHAIN_HAS_ZBC !! 293 depends on SPARC64 && SMP
690 depends on MMU <<
691 depends on RISCV_ALTERNATIVE <<
692 default y <<
693 help <<
694 Adds support to dynamically detect <<
695 extension (carry-less multiplicatio <<
696 294
697 The Zbc extension could accelerate !! 295 config NODES_SHIFT
698 calculations. !! 296 int
>> 297 default "4"
>> 298 depends on NEED_MULTIPLE_NODES
699 299
700 If you don't know what to do here, !! 300 # Some NUMA nodes have memory ranges that span
>> 301 # other nodes. Even though a pfn is valid and
>> 302 # between a node's start and end pfns, it may not
>> 303 # reside on that node. See memmap_init_zone()
>> 304 # for details.
>> 305 config NODES_SPAN_OTHER_NODES
>> 306 def_bool y
>> 307 depends on NEED_MULTIPLE_NODES
701 308
702 config RISCV_ISA_ZICBOM !! 309 config ARCH_SELECT_MEMORY_MODEL
703 bool "Zicbom extension support for non !! 310 def_bool y if SPARC64
704 depends on MMU <<
705 depends on RISCV_ALTERNATIVE <<
706 default y <<
707 select RISCV_DMA_NONCOHERENT <<
708 select DMA_DIRECT_REMAP <<
709 help <<
710 Adds support to dynamically detect <<
711 extension (Cache Block Management O <<
712 usage. <<
713 <<
714 The Zicbom extension can be used to <<
715 non-coherent DMA support on devices <<
716 <<
717 If you don't know what to do here, <<
718 <<
719 config RISCV_ISA_ZICBOZ <<
720 bool "Zicboz extension support for fas <<
721 depends on RISCV_ALTERNATIVE <<
722 default y <<
723 help <<
724 Enable the use of the Zicboz extens <<
725 when available. <<
726 311
727 The Zicboz extension is used for fa !! 312 config ARCH_SPARSEMEM_ENABLE
>> 313 def_bool y if SPARC64
>> 314 select SPARSEMEM_VMEMMAP_ENABLE
728 315
729 If you don't know what to do here, !! 316 config ARCH_SPARSEMEM_DEFAULT
>> 317 def_bool y if SPARC64
730 318
731 config TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI !! 319 config FORCE_MAX_ZONEORDER
732 def_bool y !! 320 int "Maximum zone order"
733 # https://sourceware.org/git/?p=binuti !! 321 default "13"
734 # https://gcc.gnu.org/git/?p=gcc.git;a <<
735 depends on AS_IS_GNU && AS_VERSION >= <<
736 help 322 help
737 Binutils-2.38 and GCC-12.1.0 bumped !! 323 The kernel memory allocator divides physically contiguous memory
738 20191213 version, which moves some i !! 324 blocks into "zones", where each zone is a power of two number of
739 the Zicsr and Zifencei extensions. T !! 325 pages. This option selects the largest power of two that the kernel
740 Zicsr and Zifencei when binutils >= !! 326 keeps in the memory allocator. If you need to allocate very large
741 and Zifencei are supported in binuti !! 327 blocks of physically contiguous memory, then you may need to
742 To make life easier, and avoid forci !! 328 increase this value.
743 newer ISA spec to version 2.2, relax <<
744 For clang < 17 or GCC < 11.3.0, for <<
745 special treatment, this is dealt wit <<
746 329
747 config TOOLCHAIN_NEEDS_OLD_ISA_SPEC !! 330 This config option is actually maximum order plus one. For example,
748 def_bool y !! 331 a value of 13 means that the largest free memory block is 2^12 pages.
749 depends on TOOLCHAIN_NEEDS_EXPLICIT_ZI <<
750 # https://github.com/llvm/llvm-project <<
751 # https://gcc.gnu.org/git/?p=gcc.git;a <<
752 depends on (CC_IS_CLANG && CLANG_VERSI <<
753 help <<
754 Certain versions of clang and GCC do <<
755 -march. This option causes an older <<
756 versions of clang and GCC to be pass <<
757 as passing zicsr and zifencei to -ma <<
758 332
759 config FPU !! 333 source "mm/Kconfig"
760 bool "FPU support" <<
761 default y <<
762 help <<
763 Say N here if you want to disable al <<
764 in the kernel. <<
765 334
766 If you don't know what to do here, s !! 335 if SPARC64
>> 336 source "kernel/power/Kconfig"
>> 337 endif
767 338
768 config IRQ_STACKS !! 339 config SCHED_SMT
769 bool "Independent irq & softirq stacks !! 340 bool "SMT (Hyperthreading) scheduler support"
>> 341 depends on SPARC64 && SMP
770 default y 342 default y
771 select HAVE_IRQ_EXIT_ON_IRQ_STACK <<
772 select HAVE_SOFTIRQ_ON_OWN_STACK <<
773 help <<
774 Add independent irq & softirq stacks <<
775 overflows. We may save some memory f <<
776 <<
777 config THREAD_SIZE_ORDER <<
778 int "Kernel stack size (in power-of-tw <<
779 range 0 4 <<
780 default 1 if 32BIT <<
781 default 2 <<
782 help <<
783 Specify the Pages of thread stack si <<
784 affects irq stack size, which is equ <<
785 <<
786 config RISCV_MISALIGNED <<
787 bool <<
788 select SYSCTL_ARCH_UNALIGN_ALLOW <<
789 help 343 help
790 Embed support for emulating misalign !! 344 SMT scheduler support improves the CPU scheduler's decision making
>> 345 when dealing with SPARC cpus at a cost of slightly increased overhead
>> 346 in some places. If unsure say N here.
791 347
792 choice !! 348 config SCHED_MC
793 prompt "Unaligned Accesses Support" !! 349 bool "Multi-core scheduler support"
794 default RISCV_PROBE_UNALIGNED_ACCESS !! 350 depends on SPARC64 && SMP
795 help !! 351 default y
796 This determines the level of support <<
797 information is used by the kernel to <<
798 exposed to user space via the hwprob <<
799 probed at boot by default. <<
800 <<
801 config RISCV_PROBE_UNALIGNED_ACCESS <<
802 bool "Probe for hardware unaligned acc <<
803 select RISCV_MISALIGNED <<
804 help <<
805 During boot, the kernel will run a s <<
806 speed of unaligned accesses. This pr <<
807 the speed of unaligned accesses on t <<
808 memory accesses trap into the kernel <<
809 system, the kernel will emulate the <<
810 UABI. <<
811 <<
812 config RISCV_EMULATED_UNALIGNED_ACCESS <<
813 bool "Emulate unaligned access where s <<
814 select RISCV_MISALIGNED <<
815 help <<
816 If unaligned memory accesses trap in <<
817 supported by the system, the kernel <<
818 accesses to preserve the UABI. When <<
819 unaligned accesses, the unaligned ac <<
820 <<
821 config RISCV_SLOW_UNALIGNED_ACCESS <<
822 bool "Assume the system supports slow <<
823 depends on NONPORTABLE <<
824 help <<
825 Assume that the system supports slow <<
826 kernel and userspace programs may no <<
827 that do not support unaligned memory <<
828 <<
829 config RISCV_EFFICIENT_UNALIGNED_ACCESS <<
830 bool "Assume the system supports fast <<
831 depends on NONPORTABLE <<
832 select DCACHE_WORD_ACCESS if MMU <<
833 select HAVE_EFFICIENT_UNALIGNED_ACCESS <<
834 help 352 help
835 Assume that the system supports fast !! 353 Multi-core scheduler support improves the CPU scheduler's decision
836 enabled, this option improves the pe !! 354 making when dealing with multi-core CPU chips at a cost of slightly
837 systems. However, the kernel and use !! 355 increased overhead in some places. If unsure say N here.
838 slowly, or will not be able to run a <<
839 support efficient unaligned memory a <<
840 <<
841 endchoice <<
842 356
843 source "arch/riscv/Kconfig.vendor" !! 357 source "kernel/Kconfig.preempt"
844 358
845 endmenu # "Platform type" !! 359 config CMDLINE_BOOL
>> 360 bool "Default bootloader kernel arguments"
>> 361 depends on SPARC64
846 362
847 menu "Kernel features" !! 363 config CMDLINE
>> 364 string "Initial kernel command string"
>> 365 depends on CMDLINE_BOOL
>> 366 default "console=ttyS0,9600 root=/dev/sda1"
>> 367 help
>> 368 Say Y here if you want to be able to pass default arguments to
>> 369 the kernel. This will be overridden by the bootloader, if you
>> 370 use one (such as SILO). This is most useful if you want to boot
>> 371 a kernel from TFTP, and want default options to be available
>> 372 with having them passed on the command line.
>> 373
>> 374 NOTE: This option WILL override the PROM bootargs setting!
>> 375
>> 376 config SUN_PM
>> 377 bool
>> 378 default y if SPARC32
>> 379 help
>> 380 Enable power management and CPU standby features on supported
>> 381 SPARC platforms.
>> 382
>> 383 config SPARC_LED
>> 384 tristate "Sun4m LED driver"
>> 385 depends on SPARC32
>> 386 help
>> 387 This driver toggles the front-panel LED on sun4m systems
>> 388 in a user-specifiable manner. Its state can be probed
>> 389 by reading /proc/led and its blinking mode can be changed
>> 390 via writes to /proc/led
>> 391
>> 392 config SERIAL_CONSOLE
>> 393 bool
>> 394 depends on SPARC32
>> 395 default y
>> 396 ---help---
>> 397 If you say Y here, it will be possible to use a serial port as the
>> 398 system console (the system console is the device which receives all
>> 399 kernel messages and warnings and which allows logins in single user
>> 400 mode). This could be useful if some terminal or printer is connected
>> 401 to that serial port.
>> 402
>> 403 Even if you say Y here, the currently visible virtual console
>> 404 (/dev/tty0) will still be used as the system console by default, but
>> 405 you can alter that using a kernel command line option such as
>> 406 "console=ttyS1". (Try "man bootparam" or see the documentation of
>> 407 your boot loader (silo) about how to pass options to the kernel at
>> 408 boot time.)
>> 409
>> 410 If you don't have a graphics card installed and you say Y here, the
>> 411 kernel will automatically use the first serial line, /dev/ttyS0, as
>> 412 system console.
848 413
849 source "kernel/Kconfig.hz" !! 414 If unsure, say N.
850 415
851 config RISCV_SBI_V01 !! 416 config SPARC_LEON
852 bool "SBI v0.1 support" !! 417 bool "Sparc Leon processor family"
853 depends on RISCV_SBI !! 418 depends on SPARC32
854 help !! 419 select USB_EHCI_BIG_ENDIAN_MMIO
855 This config allows kernel to use SBI !! 420 select USB_EHCI_BIG_ENDIAN_DESC
856 deprecated in future once legacy M-m !! 421 ---help---
>> 422 If you say Y here if you are running on a SPARC-LEON processor.
>> 423 The LEON processor is a synthesizable VHDL model of the
>> 424 SPARC-v8 standard. LEON is part of the GRLIB collection of
>> 425 IP cores that are distributed under GPL. GRLIB can be downloaded
>> 426 from www.gaisler.com. You can download a sparc-linux cross-compilation
>> 427 toolchain at www.gaisler.com.
857 428
858 config RISCV_BOOT_SPINWAIT !! 429 if SPARC_LEON
859 bool "Spinwait booting method" !! 430 menu "U-Boot options"
860 depends on SMP <<
861 default y if RISCV_SBI_V01 || RISCV_M_ <<
862 help <<
863 This enables support for booting Lin <<
864 spinwait method, all cores randomly <<
865 gets chosen via lottery and all othe <<
866 variable. This method cannot support <<
867 scheme. It should be only enabled fo <<
868 on older firmware without SBI HSM ex <<
869 rely on ordered booting via SBI HSM <<
870 dynamically at runtime if the firmwa <<
871 <<
872 Since spinwait is incompatible with <<
873 NR_CPUS be large enough to contain t <<
874 hart to enter Linux. <<
875 431
876 If unsure what to do here, say N. !! 432 config UBOOT_LOAD_ADDR
>> 433 hex "uImage Load Address"
>> 434 default 0x40004000
>> 435 ---help---
>> 436 U-Boot kernel load address, the address in physical address space
>> 437 where u-boot will place the Linux kernel before booting it.
>> 438 This address is normally the base address of main memory + 0x4000.
877 439
878 config ARCH_SUPPORTS_KEXEC !! 440 config UBOOT_FLASH_ADDR
879 def_bool y !! 441 hex "uImage.o Load Address"
>> 442 default 0x00080000
>> 443 ---help---
>> 444 Optional setting only affecting the uImage.o ELF-image used to
>> 445 download the uImage file to the target using a ELF-loader other than
>> 446 U-Boot. It may for example be used to download an uImage to FLASH with
>> 447 the GRMON utility before even starting u-boot.
880 448
881 config ARCH_SELECTS_KEXEC !! 449 config UBOOT_ENTRY_ADDR
882 def_bool y !! 450 hex "uImage Entry Address"
883 depends on KEXEC !! 451 default 0xf0004000
884 select HOTPLUG_CPU if SMP !! 452 ---help---
>> 453 Do not change this unless you know what you're doing. This is
>> 454 hardcoded by the SPARC32 and LEON port.
885 455
886 config ARCH_SUPPORTS_KEXEC_FILE !! 456 This is the virtual address u-boot jumps to when booting the Linux
887 def_bool 64BIT !! 457 Kernel.
888 458
889 config ARCH_SELECTS_KEXEC_FILE !! 459 endmenu
890 def_bool y !! 460 endif
891 depends on KEXEC_FILE <<
892 select HAVE_IMA_KEXEC if IMA <<
893 select KEXEC_ELF <<
894 461
895 config ARCH_SUPPORTS_KEXEC_PURGATORY !! 462 endmenu
896 def_bool ARCH_SUPPORTS_KEXEC_FILE <<
897 463
898 config ARCH_SUPPORTS_CRASH_DUMP !! 464 menu "Bus options (PCI etc.)"
899 def_bool y !! 465 config SBUS
>> 466 bool
>> 467 default y
900 468
901 config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATIO !! 469 config SBUSCHAR
902 def_bool CRASH_RESERVE !! 470 bool
>> 471 default y
903 472
904 config COMPAT !! 473 config SUN_LDOMS
905 bool "Kernel support for 32-bit U-mode !! 474 bool "Sun Logical Domains support"
906 default 64BIT !! 475 depends on SPARC64
907 depends on 64BIT && MMU <<
908 help 476 help
909 This option enables support for a 32 !! 477 Say Y here is you want to support virtual devices via
910 kernel at S-mode. riscv32-specific c !! 478 Logical Domains.
911 the user helper functions (vdso), si !! 479
912 ptrace interface are handled appropr !! 480 config PCI
913 !! 481 bool "Support for PCI and PS/2 keyboard/mouse"
914 If you want to execute 32-bit usersp <<
915 <<
916 config PARAVIRT <<
917 bool "Enable paravirtualization code" <<
918 depends on RISCV_SBI <<
919 help <<
920 This changes the kernel so it can mo <<
921 under a hypervisor, potentially impr <<
922 over full virtualization. <<
923 <<
924 config PARAVIRT_TIME_ACCOUNTING <<
925 bool "Paravirtual steal time accountin <<
926 depends on PARAVIRT <<
927 help <<
928 Select this option to enable fine gr <<
929 accounting. Time spent executing oth <<
930 the current vCPU is discounted from <<
931 that, there can be a small performan <<
932 <<
933 If in doubt, say N here. <<
934 <<
935 config RELOCATABLE <<
936 bool "Build a relocatable kernel" <<
937 depends on MMU && 64BIT && !XIP_KERNEL <<
938 select MODULE_SECTIONS if MODULES <<
939 help 482 help
940 This builds a kernel as a Position I !! 483 Find out whether your system includes a PCI bus. PCI is the name of
941 which retains all relocation metadat !! 484 a bus system, i.e. the way the CPU talks to the other stuff inside
942 kernel binary at runtime to a differ !! 485 your box. If you say Y here, the kernel will include drivers and
943 address it was linked at. !! 486 infrastructure code to support PCI bus devices.
944 Since RISCV uses the RELA relocation <<
945 relocation pass at runtime even if t <<
946 same address it was linked at. <<
947 <<
948 If unsure, say N. <<
949 <<
950 config RANDOMIZE_BASE <<
951 bool "Randomize the address of the ker <<
952 select RELOCATABLE <<
953 depends on MMU && 64BIT && !XIP_KERNEL <<
954 help <<
955 Randomizes the virtual address at wh <<
956 loaded, as a security feature that d <<
957 relying on knowledge of the location <<
958 <<
959 It is the bootloader's job to provid <<
960 random u64 value in /chosen/kaslr-se <<
961 <<
962 When booting via the UEFI stub, it w <<
963 EFI_RNG_PROTOCOL implementation (if <<
964 to the kernel proper. In addition, i <<
965 location of the kernel Image as well <<
966 487
967 If unsure, say N. !! 488 CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
>> 489 CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
>> 490 All of these platforms are extremely obscure, so say N if unsure.
968 491
969 endmenu # "Kernel features" !! 492 config PCI_DOMAINS
>> 493 def_bool PCI if SPARC64
970 494
971 menu "Boot options" !! 495 config PCI_SYSCALL
>> 496 def_bool PCI
972 497
973 config CMDLINE !! 498 config PCIC_PCI
974 string "Built-in kernel command line" !! 499 bool
975 help !! 500 depends on PCI && SPARC32 && !SPARC_LEON
976 For most platforms, the arguments fo !! 501 default y
977 are provided at run-time, during boo <<
978 where either no arguments are being <<
979 arguments are insufficient or even i <<
980 <<
981 When that occurs, it is possible to <<
982 line here and choose how the kernel <<
983 <<
984 choice <<
985 prompt "Built-in command line usage" <<
986 depends on CMDLINE != "" <<
987 default CMDLINE_FALLBACK <<
988 help <<
989 Choose how the kernel will handle th <<
990 line. <<
991 502
992 config CMDLINE_FALLBACK !! 503 config LEON_PCI
993 bool "Use bootloader kernel arguments !! 504 bool
994 help !! 505 depends on PCI && SPARC_LEON
995 Use the built-in command line as fal !! 506 default y
996 during boot. This is the default beh <<
997 507
998 config CMDLINE_EXTEND !! 508 config SPARC_GRPCI1
999 bool "Extend bootloader kernel argumen !! 509 bool "GRPCI Host Bridge Support"
>> 510 depends on LEON_PCI
>> 511 default y
1000 help 512 help
1001 The command-line arguments provided !! 513 Say Y here to include the GRPCI Host Bridge Driver. The GRPCI
1002 appended to the built-in command li !! 514 PCI host controller is typically found in GRLIB SPARC32/LEON
1003 cases where the provided arguments !! 515 systems. The driver has one property (all_pci_errors) controlled
1004 you don't want to or cannot modify !! 516 from the bootloader that makes the GRPCI to generate interrupts
>> 517 on detected PCI Parity and System errors.
1005 518
1006 config CMDLINE_FORCE !! 519 config SPARC_GRPCI2
1007 bool "Always use the default kernel c !! 520 bool "GRPCI2 Host Bridge Support"
1008 help !! 521 depends on LEON_PCI
1009 Always use the built-in command lin <<
1010 boot. This is useful in case you ne <<
1011 command line on systems where you d <<
1012 over it. <<
1013 <<
1014 endchoice <<
1015 <<
1016 config EFI_STUB <<
1017 bool <<
1018 <<
1019 config EFI <<
1020 bool "UEFI runtime support" <<
1021 depends on OF && !XIP_KERNEL <<
1022 depends on MMU <<
1023 default y <<
1024 select ARCH_SUPPORTS_ACPI if 64BIT <<
1025 select EFI_GENERIC_STUB <<
1026 select EFI_PARAMS_FROM_FDT <<
1027 select EFI_RUNTIME_WRAPPERS <<
1028 select EFI_STUB <<
1029 select LIBFDT <<
1030 select RISCV_ISA_C <<
1031 select UCS2_STRING <<
1032 help <<
1033 This option provides support for ru <<
1034 by UEFI firmware (such as non-volat <<
1035 clock, and platform reset). A UEFI <<
1036 allow the kernel to be booted as an <<
1037 is only useful on systems that have <<
1038 <<
1039 config DMI <<
1040 bool "Enable support for SMBIOS (DMI) <<
1041 depends on EFI <<
1042 default y 522 default y
1043 help 523 help
1044 This enables SMBIOS/DMI feature for !! 524 Say Y here to include the GRPCI2 Host Bridge Driver.
1045 525
1046 This option is only useful on syste !! 526 source "drivers/pci/Kconfig"
1047 However, even with this option, the <<
1048 continue to boot on existing non-UE <<
1049 527
1050 config CC_HAVE_STACKPROTECTOR_TLS !! 528 source "drivers/pcmcia/Kconfig"
1051 def_bool $(cc-option,-mstack-protecto <<
1052 529
1053 config STACKPROTECTOR_PER_TASK !! 530 config SUN_OPENPROMFS
1054 def_bool y !! 531 tristate "Openprom tree appears in /proc/openprom"
1055 depends on !RANDSTRUCT <<
1056 depends on STACKPROTECTOR && CC_HAVE_ <<
1057 <<
1058 config PHYS_RAM_BASE_FIXED <<
1059 bool "Explicitly specified physical R <<
1060 depends on NONPORTABLE <<
1061 default n <<
1062 <<
1063 config PHYS_RAM_BASE <<
1064 hex "Platform Physical RAM address" <<
1065 depends on PHYS_RAM_BASE_FIXED <<
1066 default "0x80000000" <<
1067 help 532 help
1068 This is the physical address of RAM !! 533 If you say Y, the OpenPROM device tree will be available as a
1069 explicitly specified to run early r !! 534 virtual file system, which you can mount to /proc/openprom by "mount
1070 from flash to RAM. !! 535 -t openpromfs none /proc/openprom".
1071 <<
1072 config XIP_KERNEL <<
1073 bool "Kernel Execute-In-Place from RO <<
1074 depends on MMU && SPARSEMEM && NONPOR <<
1075 # This prevents XIP from being enable <<
1076 # fail to build since XIP doesn't sup <<
1077 depends on !COMPILE_TEST <<
1078 select PHYS_RAM_BASE_FIXED <<
1079 help <<
1080 Execute-In-Place allows the kernel <<
1081 directly addressable by the CPU, su <<
1082 space since the text section of the <<
1083 to RAM. Read-write sections, such <<
1084 are still copied to RAM. The XIP k <<
1085 it has to run directly from flash, <<
1086 store it. The flash address used t <<
1087 and for storing it, is configuratio <<
1088 say Y here, you must know the prope <<
1089 store the kernel image depending on <<
1090 <<
1091 Also note that the make target beco <<
1092 "make zImage" or "make Image". The <<
1093 ROM memory will be arch/riscv/boot/ <<
1094 <<
1095 SPARSEMEM is required because the k <<
1096 flash resident are not backed by me <<
1097 a struct page on those regions will <<
1098 536
1099 If unsure, say N. !! 537 To compile the /proc/openprom support as a module, choose M here: the
>> 538 module will be called openpromfs.
1100 539
1101 config XIP_PHYS_ADDR !! 540 Only choose N if you know in advance that you will not need to modify
1102 hex "XIP Kernel Physical Location" !! 541 OpenPROM settings on the running system.
1103 depends on XIP_KERNEL <<
1104 default "0x21000000" <<
1105 help <<
1106 This is the physical address in you <<
1107 be linked for and stored to. This <<
1108 own flash usage. <<
1109 542
1110 config RISCV_ISA_FALLBACK !! 543 # Makefile helpers
1111 bool "Permit falling back to parsing !! 544 config SPARC64_PCI
>> 545 bool
1112 default y 546 default y
1113 help !! 547 depends on SPARC64 && PCI
1114 Parsing the "riscv,isa" devicetree <<
1115 replaced by a list of explicitly de <<
1116 with existing platforms, the kernel <<
1117 "riscv,isa" property if the replace <<
1118 <<
1119 Selecting N here will result in a k <<
1120 fallback, unless the commandline "r <<
1121 present. <<
1122 <<
1123 Please see the dt-binding, located <<
1124 Documentation/devicetree/bindings/r <<
1125 on the replacement properties, "ris <<
1126 "riscv,isa-extensions". <<
1127 <<
1128 config BUILTIN_DTB <<
1129 bool "Built-in device tree" <<
1130 depends on OF && NONPORTABLE <<
1131 help <<
1132 Build a device tree into the Linux <<
1133 This option should be selected if n <<
1134 If unsure, say N. <<
1135 548
>> 549 config SPARC64_PCI_MSI
>> 550 bool
>> 551 default y
>> 552 depends on SPARC64_PCI && PCI_MSI
1136 553
1137 config BUILTIN_DTB_SOURCE !! 554 endmenu
1138 string "Built-in device tree source" <<
1139 depends on BUILTIN_DTB <<
1140 help <<
1141 DTS file path (without suffix, rela <<
1142 for the DTS file that will be used <<
1143 kernel. <<
1144 555
1145 endmenu # "Boot options" !! 556 menu "Executable file formats"
1146 557
1147 config PORTABLE !! 558 source "fs/Kconfig.binfmt"
1148 bool <<
1149 default !NONPORTABLE <<
1150 select EFI <<
1151 select MMU <<
1152 select OF <<
1153 559
1154 config ARCH_PROC_KCORE_TEXT !! 560 config COMPAT
1155 def_bool y !! 561 bool
1156 !! 562 depends on SPARC64
1157 menu "Power management options" !! 563 default y
>> 564 select COMPAT_BINFMT_ELF
>> 565 select HAVE_UID16
>> 566 select ARCH_WANT_OLD_COMPAT_IPC
>> 567 select COMPAT_OLD_SIGACTION
1158 568
1159 source "kernel/power/Kconfig" !! 569 config SYSVIPC_COMPAT
>> 570 bool
>> 571 depends on COMPAT && SYSVIPC
>> 572 default y
1160 573
1161 config ARCH_HIBERNATION_POSSIBLE !! 574 config KEYS_COMPAT
1162 def_bool y !! 575 def_bool y if COMPAT && KEYS
1163 576
1164 config ARCH_HIBERNATION_HEADER !! 577 endmenu
1165 def_bool HIBERNATION <<
1166 578
1167 config ARCH_SUSPEND_POSSIBLE !! 579 source "net/Kconfig"
1168 def_bool y <<
1169 580
1170 endmenu # "Power management options" !! 581 source "drivers/Kconfig"
1171 582
1172 menu "CPU Power Management" !! 583 source "drivers/sbus/char/Kconfig"
1173 584
1174 source "drivers/cpuidle/Kconfig" !! 585 source "fs/Kconfig"
1175 586
1176 source "drivers/cpufreq/Kconfig" !! 587 source "arch/sparc/Kconfig.debug"
1177 588
1178 endmenu # "CPU Power Management" !! 589 source "security/Kconfig"
1179 590
1180 source "arch/riscv/kvm/Kconfig" !! 591 source "crypto/Kconfig"
1181 592
1182 source "drivers/acpi/Kconfig" !! 593 source "lib/Kconfig"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.