>> 1 #
>> 2 # m68k/Makefile
>> 3 #
1 # This file is included by the global makefile 4 # This file is included by the global makefile so that you can add your own
2 # architecture-specific flags and dependencies !! 5 # architecture-specific flags and dependencies. Remember to do have actions
>> 6 # for "archclean" and "archdep" for cleaning up and making dependencies for
>> 7 # this architecture
3 # 8 #
4 # This file is subject to the terms and condit 9 # This file is subject to the terms and conditions of the GNU General Public
5 # License. See the file "COPYING" in the main 10 # License. See the file "COPYING" in the main directory of this archive
6 # for more details. 11 # for more details.
7 # 12 #
>> 13 # Copyright (C) 1994 by Hamish Macdonald
>> 14 # Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com>
>> 15 #
8 16
9 LDFLAGS_vmlinux := -z norelro !! 17 KBUILD_DEFCONFIG := multi_defconfig
10 ifeq ($(CONFIG_RELOCATABLE),y) <<
11 LDFLAGS_vmlinux += -shared -Bsymbolic <<
12 KBUILD_CFLAGS += -fPIE <<
13 endif <<
14 ifeq ($(CONFIG_DYNAMIC_FTRACE),y) <<
15 LDFLAGS_vmlinux += --no-relax <<
16 KBUILD_CPPFLAGS += -DCC_USING_PATCHABL <<
17 ifeq ($(CONFIG_RISCV_ISA_C),y) <<
18 CC_FLAGS_FTRACE := -fpatchable-functio <<
19 else <<
20 CC_FLAGS_FTRACE := -fpatchable-functio <<
21 endif <<
22 endif <<
23 <<
24 ifeq ($(CONFIG_CMODEL_MEDLOW),y) <<
25 KBUILD_CFLAGS_MODULE += -mcmodel=medany <<
26 endif <<
27 <<
28 export BITS <<
29 ifeq ($(CONFIG_ARCH_RV64I),y) <<
30 BITS := 64 <<
31 UTS_MACHINE := riscv64 <<
32 <<
33 KBUILD_CFLAGS += -mabi=lp64 <<
34 KBUILD_AFLAGS += -mabi=lp64 <<
35 <<
36 KBUILD_LDFLAGS += -melf64lriscv <<
37 <<
38 KBUILD_RUSTFLAGS += -Ctarget-cpu=gener <<
39 -Cno-redzone <<
40 else <<
41 BITS := 32 <<
42 UTS_MACHINE := riscv32 <<
43 18
44 KBUILD_CFLAGS += -mabi=ilp32 !! 19 ifneq ($(SUBARCH),$(ARCH))
45 KBUILD_AFLAGS += -mabi=ilp32 !! 20 ifeq ($(CROSS_COMPILE),)
46 KBUILD_LDFLAGS += -melf32lriscv !! 21 CROSS_COMPILE := $(call cc-cross-prefix, \
>> 22 m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
>> 23 endif
47 endif 24 endif
48 25
49 ifndef CONFIG_RISCV_USE_LINKER_RELAXATION !! 26 #
50 KBUILD_CFLAGS += -mno-relax !! 27 # Enable processor type. Ordering of these is important - we want to
51 KBUILD_AFLAGS += -mno-relax !! 28 # use the minimum processor type of the range we support. The logic
52 ifndef CONFIG_AS_IS_LLVM !! 29 # for 680x0 will only allow use of the -m68060 or -m68040 if no other
53 KBUILD_CFLAGS += -Wa,-mno-relax !! 30 # 680x0 type is specified - and no option is specified for 68030 or
54 KBUILD_AFLAGS += -Wa,-mno-relax !! 31 # 68020. The other m68k/ColdFire types always specify some type of
55 endif !! 32 # compiler cpu type flag.
56 # LLVM has an issue with target-features and L !! 33 #
57 # Ensure it is aware of linker relaxation with !! 34 ifndef CONFIG_M68040
58 # be incorrect: https://github.com/llvm/llvm-p !! 35 cpuflags-$(CONFIG_M68060) := -m68060
59 else ifeq ($(CONFIG_LTO_CLANG),y) <<
60 KBUILD_LDFLAGS += -mllvm -mattr=+c -ml <<
61 endif 36 endif
62 !! 37 ifndef CONFIG_M68060
63 ifeq ($(CONFIG_SHADOW_CALL_STACK),y) !! 38 cpuflags-$(CONFIG_M68040) := -m68040
64 KBUILD_LDFLAGS += --no-relax-gp <<
65 endif 39 endif
66 !! 40 cpuflags-$(CONFIG_M68030) :=
67 # ISA string setting !! 41 cpuflags-$(CONFIG_M68020) :=
68 riscv-march-$(CONFIG_ARCH_RV32I) := rv3 !! 42 cpuflags-$(CONFIG_M68360) := -m68332
69 riscv-march-$(CONFIG_ARCH_RV64I) := rv6 !! 43 cpuflags-$(CONFIG_M68000) := -m68000
70 riscv-march-$(CONFIG_FPU) := $(r !! 44 cpuflags-$(CONFIG_M5441x) := $(call cc-option,-mcpu=54455,-mcfv4e)
71 riscv-march-$(CONFIG_RISCV_ISA_C) := $(r !! 45 cpuflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200)
72 riscv-march-$(CONFIG_RISCV_ISA_V) := $(r !! 46 cpuflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200)
73 !! 47 cpuflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307)
74 ifneq ($(CONFIG_RISCV_ISA_C),y) !! 48 cpuflags-$(CONFIG_M537x) := $(call cc-option,-mcpu=537x,-m5307)
75 KBUILD_RUSTFLAGS += -Ctarget-feature=- !! 49 cpuflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200)
>> 50 cpuflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307)
>> 51 cpuflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
>> 52 cpuflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
>> 53 cpuflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
>> 54 cpuflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
>> 55 cpuflags-$(CONFIG_M525x) := $(call cc-option,-mcpu=5253,-m5200)
>> 56 cpuflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
>> 57 cpuflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200)
>> 58 cpuflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200)
>> 59 cpuflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200)
>> 60
>> 61 KBUILD_AFLAGS += $(cpuflags-y)
>> 62 KBUILD_CFLAGS += $(cpuflags-y)
>> 63
>> 64 KBUILD_CFLAGS += -pipe -ffreestanding
>> 65
>> 66 ifdef CONFIG_MMU
>> 67 # without -fno-strength-reduce the 53c7xx.c driver fails ;-(
>> 68 KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2
>> 69 else
>> 70 # we can use a m68k-linux-gcc toolchain with these in place
>> 71 KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
>> 72 KBUILD_CFLAGS += -D__uClinux__
>> 73 KBUILD_AFLAGS += -D__uClinux__
>> 74 endif
>> 75
>> 76 LDFLAGS := -m m68kelf
>> 77 KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
>> 78
>> 79 ifdef CONFIG_SUN3
>> 80 LDFLAGS_vmlinux = -N
>> 81 endif
>> 82
>> 83 CHECKFLAGS += -D__mc68000__
>> 84
>> 85
>> 86 ifdef CONFIG_KGDB
>> 87 # If configured for kgdb support, include debugging infos and keep the
>> 88 # frame pointer
>> 89 KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
76 endif 90 endif
77 91
78 ifdef CONFIG_TOOLCHAIN_NEEDS_OLD_ISA_SPEC !! 92 #
79 KBUILD_CFLAGS += -Wa,-misa-spec=2.2 !! 93 # Select the assembler head startup code. Order is important. The default
80 KBUILD_AFLAGS += -Wa,-misa-spec=2.2 !! 94 # head code is first, processor specific selections can override it after.
>> 95 #
>> 96 head-y := arch/m68k/kernel/head.o
>> 97 head-$(CONFIG_SUN3) := arch/m68k/kernel/sun3-head.o
>> 98 head-$(CONFIG_M68360) := arch/m68k/68360/head.o
>> 99 head-$(CONFIG_M68000) := arch/m68k/68000/head.o
>> 100 head-$(CONFIG_COLDFIRE) := arch/m68k/coldfire/head.o
>> 101
>> 102 core-y += arch/m68k/kernel/ arch/m68k/mm/
>> 103 libs-y += arch/m68k/lib/
>> 104
>> 105 core-$(CONFIG_Q40) += arch/m68k/q40/
>> 106 core-$(CONFIG_AMIGA) += arch/m68k/amiga/
>> 107 core-$(CONFIG_ATARI) += arch/m68k/atari/
>> 108 core-$(CONFIG_MAC) += arch/m68k/mac/
>> 109 core-$(CONFIG_HP300) += arch/m68k/hp300/
>> 110 core-$(CONFIG_APOLLO) += arch/m68k/apollo/
>> 111 core-$(CONFIG_MVME147) += arch/m68k/mvme147/
>> 112 core-$(CONFIG_MVME16x) += arch/m68k/mvme16x/
>> 113 core-$(CONFIG_BVME6000) += arch/m68k/bvme6000/
>> 114 core-$(CONFIG_SUN3X) += arch/m68k/sun3x/ arch/m68k/sun3/
>> 115 core-$(CONFIG_SUN3) += arch/m68k/sun3/ arch/m68k/sun3/prom/
>> 116 core-$(CONFIG_NATFEAT) += arch/m68k/emu/
>> 117 core-$(CONFIG_M68040) += arch/m68k/fpsp040/
>> 118 core-$(CONFIG_M68060) += arch/m68k/ifpsp060/
>> 119 core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/
>> 120 core-$(CONFIG_M68360) += arch/m68k/68360/
>> 121 core-$(CONFIG_M68000) += arch/m68k/68000/
>> 122 core-$(CONFIG_COLDFIRE) += arch/m68k/coldfire/
>> 123
>> 124
>> 125 all: zImage
>> 126
>> 127 lilo: vmlinux
>> 128 if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
>> 129 if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
>> 130 cat vmlinux > $(INSTALL_PATH)/vmlinux
>> 131 cp System.map $(INSTALL_PATH)/System.map
>> 132 if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
>> 133
>> 134 zImage compressed: vmlinux.gz
>> 135
>> 136 vmlinux.gz: vmlinux
>> 137
>> 138 ifndef CONFIG_KGDB
>> 139 cp vmlinux vmlinux.tmp
>> 140 $(STRIP) vmlinux.tmp
>> 141 gzip -9c vmlinux.tmp >vmlinux.gz
>> 142 rm vmlinux.tmp
>> 143 else
>> 144 gzip -9c vmlinux >vmlinux.gz
>> 145 endif
>> 146
>> 147 bzImage: vmlinux.bz2
>> 148
>> 149 vmlinux.bz2: vmlinux
>> 150
>> 151 ifndef CONFIG_KGDB
>> 152 cp vmlinux vmlinux.tmp
>> 153 $(STRIP) vmlinux.tmp
>> 154 bzip2 -1c vmlinux.tmp >vmlinux.bz2
>> 155 rm vmlinux.tmp
81 else 156 else
82 riscv-march-$(CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ !! 157 bzip2 -1c vmlinux >vmlinux.bz2
83 endif 158 endif
84 159
85 # Remove F,D,V from isa string for all. Keep e !! 160 archclean:
86 # matching non-v and non-multi-letter extensio !! 161 rm -f vmlinux.gz vmlinux.bz2
87 KBUILD_CFLAGS += -march=$(shell echo $(riscv-m <<
88 <<
89 KBUILD_AFLAGS += -march=$(riscv-march-y) <<
90 <<
91 # For C code built with floating-point support <<
92 CC_FLAGS_FPU := -march=$(shell echo $(riscv-m <<
93 <<
94 KBUILD_CFLAGS += -mno-save-restore <<
95 KBUILD_CFLAGS += -DCONFIG_PAGE_OFFSET=$(CONFIG <<
96 <<
97 ifeq ($(CONFIG_CMODEL_MEDLOW),y) <<
98 KBUILD_CFLAGS += -mcmodel=medlow <<
99 endif <<
100 ifeq ($(CONFIG_CMODEL_MEDANY),y) <<
101 KBUILD_CFLAGS += -mcmodel=medany <<
102 endif <<
103 <<
104 # Avoid generating .eh_frame sections. <<
105 KBUILD_CFLAGS += -fno-asynchronous-unwind-tabl <<
106 <<
107 # The RISC-V attributes frequently cause compa <<
108 # information, so just turn them off. <<
109 KBUILD_CFLAGS += $(call cc-option,-mno-riscv-a <<
110 KBUILD_AFLAGS += $(call cc-option,-mno-riscv-a <<
111 KBUILD_CFLAGS += $(call as-option,-Wa$(comma)- <<
112 KBUILD_AFLAGS += $(call as-option,-Wa$(comma)- <<
113 <<
114 KBUILD_CFLAGS_MODULE += $(call cc-option,-mno- <<
115 KBUILD_AFLAGS_MODULE += $(call as-option,-Wa$( <<
116 <<
117 # GCC versions that support the "-mstrict-alig <<
118 # unaligned accesses. While unaligned accesse <<
119 # RISC-V ISA, they're emulated by machine mode <<
120 # architectures. It's faster to have GCC emit <<
121 ifneq ($(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCES <<
122 KBUILD_CFLAGS += $(call cc-option,-mstrict-ali <<
123 endif <<
124 <<
125 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y) <<
126 prepare: stack_protector_prepare <<
127 stack_protector_prepare: prepare0 <<
128 $(eval KBUILD_CFLAGS += -mstack-protec <<
129 -mstack-protec <<
130 -mstack-protec <<
131 awk '{if ($$2 == "TSK_ <<
132 includ <<
133 endif <<
134 <<
135 # arch specific predefines for sparse <<
136 CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS) <<
137 <<
138 # Default target when executing plain make <<
139 boot := arch/riscv/boot <<
140 ifeq ($(CONFIG_XIP_KERNEL),y) <<
141 KBUILD_IMAGE := $(boot)/xipImage <<
142 else <<
143 ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAA <<
144 KBUILD_IMAGE := $(boot)/loader.bin <<
145 else <<
146 ifeq ($(CONFIG_EFI_ZBOOT),) <<
147 KBUILD_IMAGE := $(boot)/Image.gz <<
148 else <<
149 KBUILD_IMAGE := $(boot)/vmlinuz.efi <<
150 endif <<
151 endif <<
152 endif <<
153 162
154 boot := arc !! 163 install:
155 boot-image-y := Ima !! 164 sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
156 boot-image-$(CONFIG_KERNEL_BZIP2) := Ima <<
157 boot-image-$(CONFIG_KERNEL_GZIP) := Ima <<
158 boot-image-$(CONFIG_KERNEL_LZ4) := Ima <<
159 boot-image-$(CONFIG_KERNEL_LZMA) := Ima <<
160 boot-image-$(CONFIG_KERNEL_LZO) := Ima <<
161 boot-image-$(CONFIG_KERNEL_ZSTD) := Ima <<
162 boot-image-$(CONFIG_KERNEL_XZ) := Ima <<
163 ifdef CONFIG_RISCV_M_MODE <<
164 boot-image-$(CONFIG_ARCH_CANAAN) := loa <<
165 endif <<
166 boot-image-$(CONFIG_EFI_ZBOOT) := vml <<
167 boot-image-$(CONFIG_XIP_KERNEL) := xip <<
168 KBUILD_IMAGE := $(b <<
169 <<
170 libs-y += arch/riscv/lib/ <<
171 libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/ <<
172 <<
173 ifeq ($(KBUILD_EXTMOD),) <<
174 ifeq ($(CONFIG_MMU),y) <<
175 prepare: vdso_prepare <<
176 vdso_prepare: prepare0 <<
177 $(Q)$(MAKE) $(build)=arch/riscv/kernel <<
178 $(if $(CONFIG_COMPAT),$(Q)$(MAKE) \ <<
179 $(build)=arch/riscv/kernel/com <<
180 <<
181 endif <<
182 endif <<
183 <<
184 vdso-install-y += arch/riscv/ <<
185 vdso-install-$(CONFIG_COMPAT) += arch/riscv/ <<
186 <<
187 BOOT_TARGETS := Image Image.gz Image.bz2 Image <<
188 <<
189 all: $(notdir $(KBUILD_IMAGE)) <<
190 <<
191 loader.bin: loader <<
192 Image.gz Image.bz2 Image.lz4 Image.lzma Image. <<
193 <<
194 $(BOOT_TARGETS): vmlinux <<
195 $(Q)$(MAKE) $(build)=$(boot) $(boot)/$ <<
196 @$(kecho) ' Kernel: $(boot)/$@ is rea <<
197 <<
198 # the install target always installs KBUILD_IM <<
199 # but keep the zinstall target for compatibili <<
200 install zinstall: <<
201 $(call cmd,install) <<
202 <<
203 PHONY += rv32_randconfig <<
204 rv32_randconfig: <<
205 $(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctre <<
206 -f $(srctree)/Makefile randcon <<
207 <<
208 PHONY += rv64_randconfig <<
209 rv64_randconfig: <<
210 $(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctre <<
211 -f $(srctree)/Makefile randcon <<
212 <<
213 PHONY += rv32_defconfig <<
214 rv32_defconfig: <<
215 $(Q)$(MAKE) -f $(srctree)/Makefile def <<
216 <<
217 PHONY += rv32_nommu_virt_defconfig <<
218 rv32_nommu_virt_defconfig: <<
219 $(Q)$(MAKE) -f $(srctree)/Makefile nom <<
220 <<
221 define archhelp <<
222 echo ' Image - Uncompressed <<
223 echo ' Image.gz - Compressed kernel im <<
224 echo ' Image.bz2 - Compressed kernel im <<
225 echo ' Image.lz4 - Compressed kernel im <<
226 echo ' Image.lzma - Compressed kernel im <<
227 echo ' Image.lzo - Compressed kernel im <<
228 echo ' Image.zst - Compressed kernel im <<
229 echo ' Image.xz - Compressed kernel im <<
230 echo ' vmlinuz.efi - Compressed EFI kerne <<
231 echo ' Default when CONFIG_ <<
232 echo ' xipImage - Execute-in-place ker <<
233 echo ' Default when CONFIG_ <<
234 echo ' install - Install kernel using <<
235 echo ' (distribution) /sbin <<
236 echo ' $$(INSTALL_PATH)' <<
237 endef <<
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.