1 # SPDX-License-Identifier: GPL-2.0 !! 1 config ALPHA
2 config MMU !! 2 bool
3 def_bool y !! 3 default y
>> 4 select HAVE_AOUT
>> 5 select HAVE_IDE
>> 6 select HAVE_OPROFILE
>> 7 select HAVE_PCSPKR_PLATFORM
>> 8 select HAVE_PERF_EVENTS
>> 9 select HAVE_DMA_ATTRS
>> 10 select HAVE_GENERIC_HARDIRQS
>> 11 select VIRT_TO_BUS
>> 12 select GENERIC_IRQ_PROBE
>> 13 select AUTO_IRQ_AFFINITY if SMP
>> 14 select GENERIC_IRQ_SHOW
>> 15 select ARCH_WANT_OPTIONAL_GPIOLIB
>> 16 select ARCH_WANT_IPC_PARSE_VERSION
>> 17 select ARCH_HAVE_NMI_SAFE_CMPXCHG
>> 18 select GENERIC_SMP_IDLE_THREAD
>> 19 select GENERIC_CMOS_UPDATE
>> 20 select GENERIC_STRNCPY_FROM_USER
>> 21 select GENERIC_STRNLEN_USER
>> 22 select HAVE_MOD_ARCH_SPECIFIC
>> 23 select MODULES_USE_ELF_RELA
>> 24 select ODD_RT_SIGACTION
>> 25 select OLD_SIGSUSPEND
>> 26 help
>> 27 The Alpha is a 64-bit general-purpose processor designed and
>> 28 marketed by the Digital Equipment Corporation of blessed memory,
>> 29 now Hewlett-Packard. The Alpha Linux project has a home page at
>> 30 <http://www.alphalinux.org/>.
4 31
5 config CPU_BIG_ENDIAN !! 32 config 64BIT
6 def_bool y 33 def_bool y
7 34
8 config LOCKDEP_SUPPORT !! 35 config MMU
9 def_bool y !! 36 bool
>> 37 default y
10 38
11 config STACKTRACE_SUPPORT !! 39 config RWSEM_GENERIC_SPINLOCK
12 def_bool y !! 40 bool
>> 41
>> 42 config RWSEM_XCHGADD_ALGORITHM
>> 43 bool
>> 44 default y
13 45
14 config ARCH_HAS_ILOG2_U32 46 config ARCH_HAS_ILOG2_U32
15 def_bool n !! 47 bool
>> 48 default n
16 49
17 config ARCH_HAS_ILOG2_U64 50 config ARCH_HAS_ILOG2_U64
18 def_bool n !! 51 bool
19 !! 52 default n
20 config ARCH_PROC_KCORE_TEXT <<
21 def_bool y <<
22 53
23 config GENERIC_HWEIGHT !! 54 config GENERIC_CALIBRATE_DELAY
24 def_bool !HAVE_MARCH_Z196_FEATURES !! 55 bool
>> 56 default y
25 57
26 config GENERIC_BUG !! 58 config ZONE_DMA
27 def_bool y if BUG !! 59 bool
>> 60 default y
28 61
29 config GENERIC_BUG_RELATIVE_POINTERS !! 62 config ARCH_DMA_ADDR_T_64BIT
30 def_bool y 63 def_bool y
31 64
32 config GENERIC_LOCKBREAK !! 65 config NEED_DMA_MAP_STATE
33 def_bool y if PREEMPTION !! 66 def_bool y
34 <<
35 config PGSTE <<
36 def_bool y if KVM <<
37 67
38 config AUDIT_ARCH !! 68 config NEED_SG_DMA_LENGTH
39 def_bool y 69 def_bool y
40 70
41 config NO_IOPORT_MAP !! 71 config GENERIC_ISA_DMA
42 def_bool y !! 72 bool
>> 73 default y
43 74
44 config PCI_QUIRKS !! 75 source "init/Kconfig"
45 def_bool n !! 76 source "kernel/Kconfig.freezer"
46 77
47 config ARCH_SUPPORTS_UPROBES <<
48 def_bool y <<
49 78
50 config KASAN_SHADOW_OFFSET !! 79 menu "System setup"
51 hex <<
52 depends on KASAN <<
53 default 0x1C000000000000 <<
54 80
55 config S390 !! 81 choice
56 def_bool y !! 82 prompt "Alpha system type"
57 # !! 83 default ALPHA_GENERIC
58 # Note: keep this list sorted alphabet !! 84 ---help---
59 # !! 85 This is the system type of your hardware. A "generic" kernel will
60 imply IMA_SECURE_AND_OR_TRUSTED_BOOT !! 86 run on any supported Alpha system. However, if you configure a
61 select ALTERNATE_USER_ADDRESS_SPACE !! 87 kernel for your specific system, it will be faster and smaller.
62 select ARCH_32BIT_USTAT_F_TINODE <<
63 select ARCH_BINFMT_ELF_STATE <<
64 select ARCH_CORRECT_STACKTRACE_ON_KRET <<
65 select ARCH_ENABLE_MEMORY_HOTPLUG if S <<
66 select ARCH_ENABLE_MEMORY_HOTREMOVE <<
67 select ARCH_ENABLE_SPLIT_PMD_PTLOCK if <<
68 select ARCH_HAS_CURRENT_STACK_POINTER <<
69 select ARCH_HAS_DEBUG_VIRTUAL <<
70 select ARCH_HAS_DEBUG_VM_PGTABLE <<
71 select ARCH_HAS_DEBUG_WX <<
72 select ARCH_HAS_DEVMEM_IS_ALLOWED <<
73 select ARCH_HAS_DMA_OPS if PCI <<
74 select ARCH_HAS_ELF_RANDOMIZE <<
75 select ARCH_HAS_FORCE_DMA_UNENCRYPTED <<
76 select ARCH_HAS_FORTIFY_SOURCE <<
77 select ARCH_HAS_GCOV_PROFILE_ALL <<
78 select ARCH_HAS_GIGANTIC_PAGE <<
79 select ARCH_HAS_KCOV <<
80 select ARCH_HAS_MEMBARRIER_SYNC_CORE <<
81 select ARCH_HAS_MEM_ENCRYPT <<
82 select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS <<
83 select ARCH_HAS_PTE_SPECIAL <<
84 select ARCH_HAS_SCALED_CPUTIME <<
85 select ARCH_HAS_SET_DIRECT_MAP <<
86 select ARCH_HAS_SET_MEMORY <<
87 select ARCH_HAS_STRICT_KERNEL_RWX <<
88 select ARCH_HAS_STRICT_MODULE_RWX <<
89 select ARCH_HAS_SYSCALL_WRAPPER <<
90 select ARCH_HAS_UBSAN <<
91 select ARCH_HAS_VDSO_DATA <<
92 select ARCH_HAVE_NMI_SAFE_CMPXCHG <<
93 select ARCH_INLINE_READ_LOCK <<
94 select ARCH_INLINE_READ_LOCK_BH <<
95 select ARCH_INLINE_READ_LOCK_IRQ <<
96 select ARCH_INLINE_READ_LOCK_IRQSAVE <<
97 select ARCH_INLINE_READ_TRYLOCK <<
98 select ARCH_INLINE_READ_UNLOCK <<
99 select ARCH_INLINE_READ_UNLOCK_BH <<
100 select ARCH_INLINE_READ_UNLOCK_IRQ <<
101 select ARCH_INLINE_READ_UNLOCK_IRQREST <<
102 select ARCH_INLINE_SPIN_LOCK <<
103 select ARCH_INLINE_SPIN_LOCK_BH <<
104 select ARCH_INLINE_SPIN_LOCK_IRQ <<
105 select ARCH_INLINE_SPIN_LOCK_IRQSAVE <<
106 select ARCH_INLINE_SPIN_TRYLOCK <<
107 select ARCH_INLINE_SPIN_TRYLOCK_BH <<
108 select ARCH_INLINE_SPIN_UNLOCK <<
109 select ARCH_INLINE_SPIN_UNLOCK_BH <<
110 select ARCH_INLINE_SPIN_UNLOCK_IRQ <<
111 select ARCH_INLINE_SPIN_UNLOCK_IRQREST <<
112 select ARCH_INLINE_WRITE_LOCK <<
113 select ARCH_INLINE_WRITE_LOCK_BH <<
114 select ARCH_INLINE_WRITE_LOCK_IRQ <<
115 select ARCH_INLINE_WRITE_LOCK_IRQSAVE <<
116 select ARCH_INLINE_WRITE_TRYLOCK <<
117 select ARCH_INLINE_WRITE_UNLOCK <<
118 select ARCH_INLINE_WRITE_UNLOCK_BH <<
119 select ARCH_INLINE_WRITE_UNLOCK_IRQ <<
120 select ARCH_INLINE_WRITE_UNLOCK_IRQRES <<
121 select ARCH_MHP_MEMMAP_ON_MEMORY_ENABL <<
122 select ARCH_STACKWALK <<
123 select ARCH_SUPPORTS_ATOMIC_RMW <<
124 select ARCH_SUPPORTS_DEBUG_PAGEALLOC <<
125 select ARCH_SUPPORTS_HUGETLBFS <<
126 select ARCH_SUPPORTS_INT128 if CC_HAS_ <<
127 select ARCH_SUPPORTS_NUMA_BALANCING <<
128 select ARCH_SUPPORTS_PER_VMA_LOCK <<
129 select ARCH_USE_BUILTIN_BSWAP <<
130 select ARCH_USE_CMPXCHG_LOCKREF <<
131 select ARCH_USE_SYM_ANNOTATIONS <<
132 select ARCH_WANTS_NO_INSTR <<
133 select ARCH_WANT_DEFAULT_BPF_JIT <<
134 select ARCH_WANT_IPC_PARSE_VERSION <<
135 select ARCH_WANT_KERNEL_PMD_MKWRITE <<
136 select ARCH_WANT_LD_ORPHAN_WARN <<
137 select ARCH_WANT_OPTIMIZE_HUGETLB_VMEM <<
138 select BUILDTIME_TABLE_SORT <<
139 select CLONE_BACKWARDS2 <<
140 select DCACHE_WORD_ACCESS if !KMSAN <<
141 select DYNAMIC_FTRACE if FUNCTION_TRAC <<
142 select FUNCTION_ALIGNMENT_8B if CC_IS_ <<
143 select FUNCTION_ALIGNMENT_16B if !CC_I <<
144 select GENERIC_ALLOCATOR <<
145 select GENERIC_CPU_DEVICES <<
146 select GENERIC_CPU_AUTOPROBE <<
147 select GENERIC_CPU_VULNERABILITIES <<
148 select GENERIC_ENTRY <<
149 select GENERIC_GETTIMEOFDAY <<
150 select GENERIC_PTDUMP <<
151 select GENERIC_SMP_IDLE_THREAD <<
152 select GENERIC_TIME_VSYSCALL <<
153 select GENERIC_VDSO_TIME_NS <<
154 select GENERIC_IOREMAP if PCI <<
155 select HAVE_ALIGNED_STRUCT_PAGE <<
156 select HAVE_ARCH_AUDITSYSCALL <<
157 select HAVE_ARCH_JUMP_LABEL <<
158 select HAVE_ARCH_JUMP_LABEL_RELATIVE <<
159 select HAVE_ARCH_KASAN <<
160 select HAVE_ARCH_KASAN_VMALLOC <<
161 select HAVE_ARCH_KCSAN <<
162 select HAVE_ARCH_KMSAN <<
163 select HAVE_ARCH_KFENCE <<
164 select HAVE_ARCH_RANDOMIZE_KSTACK_OFFS <<
165 select HAVE_ARCH_SECCOMP_FILTER <<
166 select HAVE_ARCH_SOFT_DIRTY <<
167 select HAVE_ARCH_STACKLEAK <<
168 select HAVE_ARCH_TRACEHOOK <<
169 select HAVE_ARCH_TRANSPARENT_HUGEPAGE <<
170 select HAVE_ARCH_VMAP_STACK <<
171 select HAVE_ASM_MODVERSIONS <<
172 select HAVE_CMPXCHG_DOUBLE <<
173 select HAVE_CMPXCHG_LOCAL <<
174 select HAVE_DEBUG_KMEMLEAK <<
175 select HAVE_DMA_CONTIGUOUS <<
176 select HAVE_DYNAMIC_FTRACE <<
177 select HAVE_DYNAMIC_FTRACE_WITH_ARGS <<
178 select HAVE_DYNAMIC_FTRACE_WITH_DIRECT <<
179 select HAVE_DYNAMIC_FTRACE_WITH_REGS <<
180 select HAVE_EBPF_JIT if HAVE_MARCH_Z19 <<
181 select HAVE_EFFICIENT_UNALIGNED_ACCESS <<
182 select HAVE_GUP_FAST <<
183 select HAVE_FENTRY <<
184 select HAVE_FTRACE_MCOUNT_RECORD <<
185 select HAVE_FUNCTION_ARG_ACCESS_API <<
186 select HAVE_FUNCTION_ERROR_INJECTION <<
187 select HAVE_FUNCTION_GRAPH_RETVAL <<
188 select HAVE_FUNCTION_GRAPH_TRACER <<
189 select HAVE_FUNCTION_TRACER <<
190 select HAVE_GCC_PLUGINS <<
191 select HAVE_GENERIC_VDSO <<
192 select HAVE_IOREMAP_PROT if PCI <<
193 select HAVE_KERNEL_BZIP2 <<
194 select HAVE_KERNEL_GZIP <<
195 select HAVE_KERNEL_LZ4 <<
196 select HAVE_KERNEL_LZMA <<
197 select HAVE_KERNEL_LZO <<
198 select HAVE_KERNEL_UNCOMPRESSED <<
199 select HAVE_KERNEL_XZ <<
200 select HAVE_KERNEL_ZSTD <<
201 select HAVE_KPROBES <<
202 select HAVE_KPROBES_ON_FTRACE <<
203 select HAVE_KRETPROBES <<
204 select HAVE_LIVEPATCH <<
205 select HAVE_MEMBLOCK_PHYS_MAP <<
206 select HAVE_MOD_ARCH_SPECIFIC <<
207 select HAVE_NMI <<
208 select HAVE_NOP_MCOUNT <<
209 select HAVE_PAGE_SIZE_4KB <<
210 select HAVE_PCI <<
211 select HAVE_PERF_EVENTS <<
212 select HAVE_PERF_REGS <<
213 select HAVE_PERF_USER_STACK_DUMP <<
214 select HAVE_REGS_AND_STACK_ACCESS_API <<
215 select HAVE_RELIABLE_STACKTRACE <<
216 select HAVE_RETHOOK <<
217 select HAVE_RSEQ <<
218 select HAVE_SAMPLE_FTRACE_DIRECT <<
219 select HAVE_SAMPLE_FTRACE_DIRECT_MULTI <<
220 select HAVE_SETUP_PER_CPU_AREA <<
221 select HAVE_SOFTIRQ_ON_OWN_STACK <<
222 select HAVE_SYSCALL_TRACEPOINTS <<
223 select HAVE_VIRT_CPU_ACCOUNTING <<
224 select HAVE_VIRT_CPU_ACCOUNTING_IDLE <<
225 select IOMMU_HELPER if PCI <<
226 select IOMMU_SUPPORT if PCI <<
227 select MMU_GATHER_MERGE_VMAS <<
228 select MMU_GATHER_NO_GATHER <<
229 select MMU_GATHER_RCU_TABLE_FREE <<
230 select MODULES_USE_ELF_RELA <<
231 select NEED_DMA_MAP_STATE if PCI <<
232 select NEED_PER_CPU_EMBED_FIRST_CHUNK <<
233 select NEED_SG_DMA_LENGTH if PCI <<
234 select OLD_SIGACTION <<
235 select OLD_SIGSUSPEND3 <<
236 select PCI_DOMAINS if PCI <<
237 select PCI_MSI if PCI <<
238 select PCI_MSI_ARCH_FALLBACKS if PCI <<
239 select SPARSE_IRQ <<
240 select SWIOTLB <<
241 select SYSCTL_EXCEPTION_TRACE <<
242 select THREAD_INFO_IN_TASK <<
243 select TRACE_IRQFLAGS_SUPPORT <<
244 select TTY <<
245 select USER_STACKTRACE_SUPPORT <<
246 select VDSO_GETRANDOM <<
247 select VIRT_CPU_ACCOUNTING <<
248 select ZONE_DMA <<
249 # Note: keep the above list sorted alp <<
250 88
251 config SCHED_OMIT_FRAME_POINTER !! 89 To find out what type of Alpha system you have, you may want to
252 def_bool y !! 90 check out the Linux/Alpha FAQ, accessible on the WWW from
>> 91 <http://www.alphalinux.org/>. In summary:
253 92
254 config PGTABLE_LEVELS !! 93 Alcor/Alpha-XLT AS 600, AS 500, XL-300, XL-366
255 int !! 94 Alpha-XL XL-233, XL-266
256 default 5 !! 95 AlphaBook1 Alpha laptop
>> 96 Avanti AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
>> 97 Cabriolet AlphaPC64, AlphaPCI64
>> 98 DP264 DP264 / DS20 / ES40 / DS10 / DS10L
>> 99 EB164 EB164 21164 evaluation board
>> 100 EB64+ EB64+ 21064 evaluation board
>> 101 EB66 EB66 21066 evaluation board
>> 102 EB66+ EB66+ 21066 evaluation board
>> 103 Jensen DECpc 150, DEC 2000 models 300, 500
>> 104 LX164 AlphaPC164-LX
>> 105 Lynx AS 2100A
>> 106 Miata Personal Workstation 433/500/600 a/au
>> 107 Marvel AlphaServer ES47 / ES80 / GS1280
>> 108 Mikasa AS 1000
>> 109 Noname AXPpci33, UDB (Multia)
>> 110 Noritake AS 1000A, AS 600A, AS 800
>> 111 PC164 AlphaPC164
>> 112 Rawhide AS 1200, AS 4000, AS 4100
>> 113 Ruffian RPX164-2, AlphaPC164-UX, AlphaPC164-BX
>> 114 SX164 AlphaPC164-SX
>> 115 Sable AS 2000, AS 2100
>> 116 Shark DS 20L
>> 117 Takara Takara (OEM)
>> 118 Titan AlphaServer ES45 / DS25 / DS15
>> 119 Wildfire AlphaServer GS 40/80/160/320
257 120
258 source "kernel/livepatch/Kconfig" !! 121 If you don't know what to do, choose "generic".
259 122
260 config ARCH_SUPPORTS_KEXEC !! 123 config ALPHA_GENERIC
261 def_bool y !! 124 bool "Generic"
262 !! 125 depends on TTY
263 config ARCH_SUPPORTS_KEXEC_FILE !! 126 help
264 def_bool y !! 127 A generic kernel will run on all supported Alpha hardware.
265 128
266 config ARCH_SUPPORTS_KEXEC_SIG !! 129 config ALPHA_ALCOR
267 def_bool MODULE_SIG_FORMAT !! 130 bool "Alcor/Alpha-XLT"
>> 131 help
>> 132 For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
>> 133 slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
>> 134 Address, CIA) - a 383 pin plastic PGA). It provides a DRAM
>> 135 controller (256-bit memory bus) and a PCI interface. It also does
>> 136 all the work required to support an external Bcache and to maintain
>> 137 memory coherence when a PCI device DMAs into (or out of) memory.
268 138
269 config ARCH_SUPPORTS_KEXEC_PURGATORY !! 139 config ALPHA_XL
270 def_bool y !! 140 bool "Alpha-XL"
>> 141 help
>> 142 XL-233 and XL-266-based Alpha systems.
271 143
272 config ARCH_SUPPORTS_CRASH_DUMP !! 144 config ALPHA_BOOK1
273 def_bool y !! 145 bool "AlphaBook1"
274 help 146 help
275 Refer to <file:Documentation/arch/s3 !! 147 Dec AlphaBook1/Burns Alpha-based laptops.
276 This option also enables s390 zfcpdu <<
277 See also <file:Documentation/arch/s3 <<
278 <<
279 menu "Processor type and features" <<
280 <<
281 config HAVE_MARCH_Z10_FEATURES <<
282 def_bool n <<
283 <<
284 config HAVE_MARCH_Z196_FEATURES <<
285 def_bool n <<
286 select HAVE_MARCH_Z10_FEATURES <<
287 <<
288 config HAVE_MARCH_ZEC12_FEATURES <<
289 def_bool n <<
290 select HAVE_MARCH_Z196_FEATURES <<
291 <<
292 config HAVE_MARCH_Z13_FEATURES <<
293 def_bool n <<
294 select HAVE_MARCH_ZEC12_FEATURES <<
295 <<
296 config HAVE_MARCH_Z14_FEATURES <<
297 def_bool n <<
298 select HAVE_MARCH_Z13_FEATURES <<
299 <<
300 config HAVE_MARCH_Z15_FEATURES <<
301 def_bool n <<
302 select HAVE_MARCH_Z14_FEATURES <<
303 <<
304 config HAVE_MARCH_Z16_FEATURES <<
305 def_bool n <<
306 select HAVE_MARCH_Z15_FEATURES <<
307 148
308 choice !! 149 config ALPHA_AVANTI_CH
309 prompt "Processor type" !! 150 bool "Avanti"
310 default MARCH_Z196 <<
311 151
312 config MARCH_Z10 !! 152 config ALPHA_CABRIOLET
313 bool "IBM System z10" !! 153 bool "Cabriolet"
314 select HAVE_MARCH_Z10_FEATURES <<
315 depends on $(cc-option,-march=z10) <<
316 help <<
317 Select this to enable optimizations <<
318 series). This is the oldest machine <<
319 <<
320 config MARCH_Z196 <<
321 bool "IBM zEnterprise 114 and 196" <<
322 select HAVE_MARCH_Z196_FEATURES <<
323 depends on $(cc-option,-march=z196) <<
324 help <<
325 Select this to enable optimizations <<
326 (2818 and 2817 series). The kernel w <<
327 not work on older machines. <<
328 <<
329 config MARCH_ZEC12 <<
330 bool "IBM zBC12 and zEC12" <<
331 select HAVE_MARCH_ZEC12_FEATURES <<
332 depends on $(cc-option,-march=zEC12) <<
333 help <<
334 Select this to enable optimizations <<
335 2827 series). The kernel will be sli <<
336 older machines. <<
337 <<
338 config MARCH_Z13 <<
339 bool "IBM z13s and z13" <<
340 select HAVE_MARCH_Z13_FEATURES <<
341 depends on $(cc-option,-march=z13) <<
342 help <<
343 Select this to enable optimizations <<
344 2964 series). The kernel will be sli <<
345 older machines. <<
346 <<
347 config MARCH_Z14 <<
348 bool "IBM z14 ZR1 and z14" <<
349 select HAVE_MARCH_Z14_FEATURES <<
350 depends on $(cc-option,-march=z14) <<
351 help <<
352 Select this to enable optimizations <<
353 and 3906 series). The kernel will be <<
354 work on older machines. <<
355 <<
356 config MARCH_Z15 <<
357 bool "IBM z15" <<
358 select HAVE_MARCH_Z15_FEATURES <<
359 depends on $(cc-option,-march=z15) <<
360 help <<
361 Select this to enable optimizations <<
362 and 8561 series). The kernel will be <<
363 work on older machines. <<
364 <<
365 config MARCH_Z16 <<
366 bool "IBM z16" <<
367 select HAVE_MARCH_Z16_FEATURES <<
368 depends on $(cc-option,-march=z16) <<
369 help 154 help
370 Select this to enable optimizations !! 155 Cabriolet AlphaPC64, AlphaPCI64 systems. Derived from EB64+ but now
371 3932 series). !! 156 baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
>> 157 slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
>> 158 Bcache SIMMs. Requires power supply with 3.3V output.
372 159
373 endchoice !! 160 config ALPHA_DP264
>> 161 bool "DP264"
>> 162 help
>> 163 Various 21264 systems with the tsunami core logic chipset.
>> 164 API Networks: 264DP, UP2000(+), CS20;
>> 165 Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
374 166
375 config MARCH_Z10_TUNE !! 167 config ALPHA_EB164
376 def_bool TUNE_Z10 || MARCH_Z10 && TUNE !! 168 bool "EB164"
>> 169 help
>> 170 EB164 21164 evaluation board from DEC. Uses 21164 and ALCOR. Has
>> 171 ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
>> 172 shared with an ISA slot) and 2 32-bit PCI slots. Uses plus-in
>> 173 Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
>> 174 MOUSE (PS2 style), RTC/NVRAM. Boot ROM is Flash. PC-AT-sized
>> 175 motherboard. Requires power supply with 3.3V output.
377 176
378 config MARCH_Z196_TUNE !! 177 config ALPHA_EB64P_CH
379 def_bool TUNE_Z196 || MARCH_Z196 && TU !! 178 bool "EB64+"
380 179
381 config MARCH_ZEC12_TUNE !! 180 config ALPHA_EB66
382 def_bool TUNE_ZEC12 || MARCH_ZEC12 && !! 181 bool "EB66"
>> 182 help
>> 183 A Digital DS group board. Uses 21066 or 21066A. I/O sub-system is
>> 184 identical to EB64+. Baby PC-AT size. Runs from standard PC power
>> 185 supply. The EB66 schematic was published as a marketing poster
>> 186 advertising the 21066 as "the first microprocessor in the world with
>> 187 embedded PCI".
383 188
384 config MARCH_Z13_TUNE !! 189 config ALPHA_EB66P
385 def_bool TUNE_Z13 || MARCH_Z13 && TUNE !! 190 bool "EB66+"
>> 191 help
>> 192 Later variant of the EB66 board.
386 193
387 config MARCH_Z14_TUNE !! 194 config ALPHA_EIGER
388 def_bool TUNE_Z14 || MARCH_Z14 && TUNE !! 195 bool "Eiger"
>> 196 help
>> 197 Apparently an obscure OEM single-board computer based on the
>> 198 Typhoon/Tsunami chipset family. Information on it is scanty.
389 199
390 config MARCH_Z15_TUNE !! 200 config ALPHA_JENSEN
391 def_bool TUNE_Z15 || MARCH_Z15 && TUNE !! 201 bool "Jensen"
>> 202 help
>> 203 DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
>> 204 of the first-generation Alpha systems. A number of these systems
>> 205 seem to be available on the second- hand market. The Jensen is a
>> 206 floor-standing tower system which originally used a 150MHz 21064 It
>> 207 used programmable logic to interface a 486 EISA I/O bridge to the
>> 208 CPU.
392 209
393 config MARCH_Z16_TUNE !! 210 config ALPHA_LX164
394 def_bool TUNE_Z16 || MARCH_Z16 && TUNE !! 211 bool "LX164"
>> 212 help
>> 213 A technical overview of this board is available at
>> 214 <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
395 215
396 choice !! 216 config ALPHA_LYNX
397 prompt "Tune code generation" !! 217 bool "Lynx"
398 default TUNE_DEFAULT <<
399 help 218 help
400 Cause the compiler to tune (-mtune) !! 219 AlphaServer 2100A-based systems.
401 This will make the code run faster o <<
402 somewhat slower on other machines. <<
403 This option only changes how the com <<
404 selection of instructions itself, so <<
405 all other machines. <<
406 <<
407 config TUNE_DEFAULT <<
408 bool "Default" <<
409 help <<
410 Tune the generated code for the targ <<
411 will be compiled. <<
412 <<
413 config TUNE_Z10 <<
414 bool "IBM System z10" <<
415 <<
416 config TUNE_Z196 <<
417 bool "IBM zEnterprise 114 and 196" <<
418 depends on $(cc-option,-mtune=z196) <<
419 <<
420 config TUNE_ZEC12 <<
421 bool "IBM zBC12 and zEC12" <<
422 depends on $(cc-option,-mtune=zEC12) <<
423 <<
424 config TUNE_Z13 <<
425 bool "IBM z13s and z13" <<
426 depends on $(cc-option,-mtune=z13) <<
427 <<
428 config TUNE_Z14 <<
429 bool "IBM z14 ZR1 and z14" <<
430 depends on $(cc-option,-mtune=z14) <<
431 <<
432 config TUNE_Z15 <<
433 bool "IBM z15" <<
434 depends on $(cc-option,-mtune=z15) <<
435 <<
436 config TUNE_Z16 <<
437 bool "IBM z16" <<
438 depends on $(cc-option,-mtune=z16) <<
439 220
440 endchoice !! 221 config ALPHA_MARVEL
>> 222 bool "Marvel"
>> 223 help
>> 224 AlphaServer ES47 / ES80 / GS1280 based on EV7.
441 225
442 config 64BIT !! 226 config ALPHA_MIATA
443 def_bool y !! 227 bool "Miata"
>> 228 help
>> 229 The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
>> 230 or 600au).
444 231
445 config COMMAND_LINE_SIZE !! 232 config ALPHA_MIKASA
446 int "Maximum size of kernel command li !! 233 bool "Mikasa"
447 default 4096 !! 234 help
448 range 896 1048576 !! 235 AlphaServer 1000-based Alpha systems.
449 help <<
450 This allows you to specify the maxim <<
451 line. <<
452 <<
453 config COMPAT <<
454 def_bool n <<
455 prompt "Kernel support for 31 bit emul <<
456 select ARCH_WANT_OLD_COMPAT_IPC <<
457 select COMPAT_OLD_SIGACTION <<
458 select HAVE_UID16 <<
459 depends on MULTIUSER <<
460 depends on !CC_IS_CLANG && !LD_IS_LLD <<
461 help <<
462 Select this option if you want to en <<
463 handle system-calls from ELF binarie <<
464 (and some other stuff like libraries <<
465 executing 31 bit applications. <<
466 236
467 If unsure say N. !! 237 config ALPHA_NAUTILUS
>> 238 bool "Nautilus"
>> 239 help
>> 240 Alpha systems based on the AMD 751 & ALI 1543C chipsets.
468 241
469 config SMP !! 242 config ALPHA_NONAME_CH
470 def_bool y !! 243 bool "Noname"
471 244
472 config NR_CPUS !! 245 config ALPHA_NORITAKE
473 int "Maximum number of CPUs (2-512)" !! 246 bool "Noritake"
474 range 2 512 !! 247 help
475 default "64" !! 248 AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
476 help !! 249 systems.
477 This allows you to specify the maxim <<
478 kernel will support. The maximum sup <<
479 minimum value which makes sense is 2 <<
480 250
481 This is purely to save memory - each !! 251 config ALPHA_PC164
482 approximately sixteen kilobytes to t !! 252 bool "PC164"
483 253
484 config HOTPLUG_CPU !! 254 config ALPHA_P2K
485 def_bool y !! 255 bool "Platform2000"
486 256
487 config NUMA !! 257 config ALPHA_RAWHIDE
488 bool "NUMA support" !! 258 bool "Rawhide"
489 depends on SCHED_TOPOLOGY <<
490 default n <<
491 help 259 help
492 Enable NUMA support !! 260 AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
493 !! 261 See HOWTO at
494 This option adds NUMA support to the !! 262 <http://www.alphalinux.org/docs/rawhide/4100_install.shtml>.
495 263
496 config NODES_SHIFT !! 264 config ALPHA_RUFFIAN
497 int !! 265 bool "Ruffian"
498 depends on NUMA !! 266 help
499 default "1" !! 267 Samsung APC164UX. There is a page on known problems and workarounds
500 !! 268 at <http://www.alphalinux.org/faq/FAQ-11.html>.
501 config SCHED_SMT <<
502 def_bool n <<
503 269
504 config SCHED_MC !! 270 config ALPHA_RX164
505 def_bool n !! 271 bool "RX164"
506 272
507 config SCHED_TOPOLOGY !! 273 config ALPHA_SX164
508 def_bool y !! 274 bool "SX164"
509 prompt "Topology scheduler support" <<
510 select SCHED_SMT <<
511 select SCHED_MC <<
512 help <<
513 Topology scheduler support improves <<
514 making when dealing with machines th <<
515 multiple cores or multiple books. <<
516 275
517 config SCHED_TOPOLOGY_VERTICAL !! 276 config ALPHA_SABLE
518 def_bool y !! 277 bool "Sable"
519 bool "Use vertical CPU polarization by <<
520 depends on SCHED_TOPOLOGY <<
521 help 278 help
522 Use vertical CPU polarization by def !! 279 Digital AlphaServer 2000 and 2100-based systems.
523 The default CPU polarization is hori <<
524 280
525 config HIPERDISPATCH_ON !! 281 config ALPHA_SHARK
526 def_bool y !! 282 bool "Shark"
527 bool "Use hiperdispatch on vertical po <<
528 depends on SCHED_TOPOLOGY <<
529 depends on PROC_SYSCTL <<
530 help <<
531 Hiperdispatch aims to improve the CP <<
532 making when using vertical polarizat <<
533 capacities dynamically. Set this opt <<
534 on vertical polarization by default. <<
535 by sysctl's s390.hiperdispatch attri <<
536 <<
537 source "kernel/Kconfig.hz" <<
538 <<
539 config CERT_STORE <<
540 bool "Get user certificates via DIAG32 <<
541 depends on KEYS <<
542 select CRYPTO_LIB_SHA256 <<
543 help <<
544 Enable this option if you want to ac <<
545 certificates via DIAG 0x320. <<
546 <<
547 These certificates will be made avai <<
548 'cert_store'. <<
549 <<
550 config KERNEL_NOBP <<
551 def_bool n <<
552 prompt "Enable modified branch predict <<
553 help <<
554 If this option is selected the kerne <<
555 branch prediction mode if the firmwa <<
556 The modified branch prediction mode <<
557 regard to speculative execution. <<
558 <<
559 With the option enabled the kernel p <<
560 can be used to run the kernel in the <<
561 283
562 With the option disabled the modifie !! 284 config ALPHA_TAKARA
563 enabled with the "nobp=1" kernel par !! 285 bool "Takara"
>> 286 help
>> 287 Alpha 11164-based OEM single-board computer.
564 288
565 If unsure, say N. !! 289 config ALPHA_TITAN
>> 290 bool "Titan"
>> 291 help
>> 292 AlphaServer ES45/DS25 SMP based on EV68 and Titan chipset.
566 293
567 config EXPOLINE !! 294 config ALPHA_WILDFIRE
568 def_bool n !! 295 bool "Wildfire"
569 depends on $(cc-option,-mindirect-bran !! 296 help
570 prompt "Avoid speculative indirect bra !! 297 AlphaServer GS 40/80/160/320 SMP based on the EV67 core.
571 help <<
572 Compile the kernel with the expoline <<
573 against kernel-to-user data leaks by <<
574 branches. <<
575 Requires a compiler with -mindirect- <<
576 protection. The kernel may run slowe <<
577 298
578 If unsure, say N. !! 299 endchoice
579 300
580 config EXPOLINE_EXTERN !! 301 # clear all implied options (don't want default values for those):
581 def_bool EXPOLINE && CC_IS_GCC && GCC_ !! 302 # Most of these machines have ISA slots; not exactly sure which don't,
582 $(success,$(srctree)/arch/s39 !! 303 # and this doesn't activate hordes of code, so do it always.
583 help !! 304 config ISA
584 Generate expolines as external funct !! 305 bool
585 This option is required for some too !! 306 default y
586 are enabled. The kernel is compiled !! 307 help
587 -mindirect-branch=thunk-extern, whic !! 308 Find out whether you have ISA slots on your motherboard. ISA is the
>> 309 name of a bus system, i.e. the way the CPU talks to the other stuff
>> 310 inside your box. Other bus systems are PCI, EISA, MicroChannel
>> 311 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
>> 312 newer boards don't support it. If you have ISA, say Y, otherwise N.
588 313
589 choice !! 314 config ISA_DMA_API
590 prompt "Expoline default" !! 315 bool
591 depends on EXPOLINE !! 316 default y
592 default EXPOLINE_FULL <<
593 317
594 config EXPOLINE_OFF !! 318 config PCI
595 bool "spectre_v2=off" !! 319 bool
>> 320 depends on !ALPHA_JENSEN
>> 321 select GENERIC_PCI_IOMAP
>> 322 default y
>> 323 help
>> 324 Find out whether you have a PCI motherboard. PCI is the name of a
>> 325 bus system, i.e. the way the CPU talks to the other stuff inside
>> 326 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
>> 327 VESA. If you have PCI, say Y, otherwise N.
596 328
597 config EXPOLINE_AUTO !! 329 config PCI_DOMAINS
598 bool "spectre_v2=auto" !! 330 bool
>> 331 default y
599 332
600 config EXPOLINE_FULL !! 333 config PCI_SYSCALL
601 bool "spectre_v2=on" !! 334 def_bool PCI
602 335
603 endchoice !! 336 config IOMMU_HELPER
>> 337 def_bool PCI
604 338
605 config RELOCATABLE !! 339 config ALPHA_NONAME
606 def_bool y !! 340 bool
>> 341 depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
>> 342 default y
607 help 343 help
608 This builds a kernel image that reta !! 344 The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
609 so it can be loaded at an arbitrary !! 345 UDB). This design was produced by Digital's Technical OEM (TOEM)
610 The relocations make the kernel imag !! 346 group. It uses the 21066 processor running at 166MHz or 233MHz. It
611 10%), but are discarded at runtime. !! 347 is a baby-AT size, and runs from a standard PC power supply. It has
612 Note: this option exists only for do !! 348 5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
613 not remove it. !! 349 2 versions, with either PS/2 or large DIN connectors for the
614 !! 350 keyboard.
615 config RANDOMIZE_BASE !! 351
616 bool "Randomize the address of the ker !! 352 config ALPHA_EV4
617 default y !! 353 bool
618 help !! 354 depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
619 In support of Kernel Address Space L !! 355 default y if !ALPHA_LYNX
620 this randomizes the address at which !! 356
621 as a security feature that deters ex !! 357 config ALPHA_LCA
622 knowledge of the location of kernel !! 358 bool
623 !! 359 depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
624 config RANDOMIZE_IDENTITY_BASE !! 360 default y
625 bool "Randomize the address of the ide <<
626 depends on RANDOMIZE_BASE <<
627 default DEBUG_VM <<
628 help <<
629 The identity mapping base address is <<
630 Allow randomization of that base to <<
631 notion of physical and virtual addre <<
632 That does not have any impact on the <<
633 kernel image is loaded. <<
634 <<
635 If unsure, say N <<
636 <<
637 config KERNEL_IMAGE_BASE <<
638 hex "Kernel image base address" <<
639 range 0x100000 0x1FFFFFE0000000 if !KA <<
640 range 0x100000 0x1BFFFFE0000000 if KAS <<
641 default 0x3FFE0000000 if !KASAN <<
642 default 0x7FFFE0000000 if KASAN <<
643 help <<
644 This is the address at which the ker <<
645 Kernel Address Space Layout Randomiz <<
646 <<
647 In case the Protected virtualization <<
648 Ultravisor imposes a virtual address <<
649 option leads to the kernel image exc <<
650 this option is ignored and the image <<
651 <<
652 If the value of this option leads to <<
653 the virtual memory where other data <<
654 option is ignored and the image is l <<
655 361
656 endmenu !! 362 config ALPHA_APECS
>> 363 bool
>> 364 depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
>> 365 default y
657 366
658 menu "Memory setup" !! 367 config ALPHA_EB64P
>> 368 bool
>> 369 depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
>> 370 default y
>> 371 help
>> 372 Uses 21064 or 21064A and APECs. Has ISA and PCI expansion (3 ISA,
>> 373 2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
>> 374 ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
>> 375 (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
>> 376 SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM. PC-AT size.
>> 377 Runs from standard PC power supply.
>> 378
>> 379 config ALPHA_EV5
>> 380 bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
>> 381 default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
>> 382
>> 383 config ALPHA_EV4
>> 384 bool
>> 385 default y if ALPHA_LYNX && !ALPHA_EV5
>> 386
>> 387 config ALPHA_CIA
>> 388 bool
>> 389 depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
>> 390 default y
659 391
660 config ARCH_SPARSEMEM_ENABLE !! 392 config ALPHA_EV56
661 def_bool y !! 393 bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
662 select SPARSEMEM_VMEMMAP_ENABLE !! 394 default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
663 select SPARSEMEM_VMEMMAP <<
664 395
665 config ARCH_SPARSEMEM_DEFAULT !! 396 config ALPHA_EV56
666 def_bool y !! 397 prompt "EV56 CPU (speed >= 333MHz)?"
>> 398 depends on ALPHA_NORITAKE || ALPHA_PRIMO
667 399
668 config MAX_PHYSMEM_BITS !! 400 config ALPHA_EV56
669 int "Maximum size of supported physica !! 401 prompt "EV56 CPU (speed >= 400MHz)?"
670 range 42 53 !! 402 depends on ALPHA_RAWHIDE
671 default "46" <<
672 help <<
673 This option specifies the maximum su <<
674 in bits. Supported is any size betwe <<
675 Increasing the number of bits also i <<
676 By default 46 bits (64TB) are suppor <<
677 403
678 config CHECK_STACK !! 404 config ALPHA_PRIMO
679 def_bool y !! 405 bool "EV5 CPU daughtercard (model 5/xxx)?"
680 depends on !VMAP_STACK !! 406 depends on ALPHA_NORITAKE || ALPHA_MIKASA
681 prompt "Detect kernel stack overflow" <<
682 help 407 help
683 This option enables the compiler opt !! 408 Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
684 -mstack-size if they are available. <<
685 it will emit additional code to each <<
686 an illegal operation if the kernel s <<
687 <<
688 Say N if you are unsure. <<
689 <<
690 config STACK_GUARD <<
691 int "Size of the guard area (128-1024) <<
692 range 128 1024 <<
693 depends on CHECK_STACK <<
694 default "256" <<
695 help <<
696 This allows you to specify the size <<
697 end of the kernel stack. If the kern <<
698 area on function entry an illegal op <<
699 needs to be a power of 2. Please kee <<
700 interrupt frame is 184 bytes for 31 <<
701 The minimum size for the stack guard <<
702 512 for 64 bit. <<
703 409
704 endmenu !! 410 config ALPHA_GAMMA
705 !! 411 bool "EV5 CPU(s) (model 5/xxx)?"
706 menu "I/O subsystem" !! 412 depends on ALPHA_SABLE
707 <<
708 config QDIO <<
709 def_tristate y <<
710 prompt "QDIO support" <<
711 help 413 help
712 This driver provides the Queued Dire !! 414 Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
713 IBM System z. <<
714 415
715 To compile this driver as a module, !! 416 config ALPHA_GAMMA
716 module will be called qdio. !! 417 bool
>> 418 depends on ALPHA_LYNX
>> 419 default y
717 420
718 If unsure, say Y. !! 421 config ALPHA_T2
>> 422 bool
>> 423 depends on ALPHA_SABLE || ALPHA_LYNX
>> 424 default y
719 425
720 if PCI !! 426 config ALPHA_PYXIS
>> 427 bool
>> 428 depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN
>> 429 default y
721 430
722 config PCI_NR_FUNCTIONS !! 431 config ALPHA_EV6
723 int "Maximum number of PCI functions ( !! 432 bool
724 range 1 4096 !! 433 depends on ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER || ALPHA_MARVEL
725 default "512" !! 434 default y
726 help <<
727 This allows you to specify the maxim <<
728 this kernel will support. <<
729 435
730 endif # PCI !! 436 config ALPHA_TSUNAMI
>> 437 bool
>> 438 depends on ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER
>> 439 default y
731 440
732 config HAS_IOMEM !! 441 config ALPHA_EV67
733 def_bool PCI !! 442 bool "EV67 (or later) CPU (speed > 600MHz)?" if ALPHA_DP264 || ALPHA_EIGER
>> 443 default y if ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
>> 444 help
>> 445 Is this a machine based on the EV67 core? If in doubt, select N here
>> 446 and the machine will be treated as an EV6.
>> 447
>> 448 config ALPHA_MCPCIA
>> 449 bool
>> 450 depends on ALPHA_RAWHIDE
>> 451 default y
734 452
735 config CHSC_SCH !! 453 config ALPHA_POLARIS
736 def_tristate m !! 454 bool
737 prompt "Support for CHSC subchannels" !! 455 depends on ALPHA_RX164
738 help !! 456 default y
739 This driver allows usage of CHSC sub <<
740 is usually present on LPAR only. <<
741 The driver creates a device /dev/chs <<
742 obtain I/O configuration information <<
743 to issue asynchronous chsc commands <<
744 You will usually only want to use th <<
745 LPAR designated for system managemen <<
746 457
747 To compile this driver as a module, !! 458 config ALPHA_IRONGATE
748 module will be called chsc_sch. !! 459 bool
>> 460 depends on ALPHA_NAUTILUS
>> 461 default y
749 462
750 If unsure, say N. !! 463 config GENERIC_HWEIGHT
>> 464 bool
>> 465 default y if !ALPHA_EV67
751 466
752 config SCM_BUS !! 467 config ALPHA_AVANTI
753 def_bool y !! 468 bool
754 prompt "SCM bus driver" !! 469 depends on ALPHA_XL || ALPHA_AVANTI_CH
>> 470 default y
755 help 471 help
756 Bus driver for Storage Class Memory. !! 472 Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
>> 473 Alphas. Info at
>> 474 <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
>> 475
>> 476 config ALPHA_BROKEN_IRQ_MASK
>> 477 bool
>> 478 depends on ALPHA_GENERIC || ALPHA_PC164
>> 479 default y
757 480
758 config EADM_SCH !! 481 config VGA_HOSE
759 def_tristate m !! 482 bool
760 prompt "Support for EADM subchannels" !! 483 depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
761 depends on SCM_BUS !! 484 default y
762 help 485 help
763 This driver allows usage of EADM sub !! 486 Support VGA on an arbitrary hose; needed for several platforms
764 as a communication vehicle for SCM i !! 487 which always have multiple hoses, and whose consoles support it.
765 488
766 To compile this driver as a module, <<
767 module will be called eadm_sch. <<
768 489
769 config AP !! 490 config ALPHA_SRM
770 def_tristate y !! 491 bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
771 prompt "Support for Adjunct Processors !! 492 depends on TTY
772 help !! 493 default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
773 This driver allows usage to Adjunct !! 494 ---help---
774 the ap bus, cards and queues. Suppor !! 495 There are two different types of booting firmware on Alphas: SRM,
775 the CryptoExpress Cards (CEX). !! 496 which is command line driven, and ARC, which uses menus and arrow
>> 497 keys. Details about the Linux/Alpha booting process are contained in
>> 498 the Linux/Alpha FAQ, accessible on the WWW from
>> 499 <http://www.alphalinux.org/>.
>> 500
>> 501 The usual way to load Linux on an Alpha machine is to use MILO
>> 502 (a bootloader that lets you pass command line parameters to the
>> 503 kernel just like lilo does for the x86 architecture) which can be
>> 504 loaded either from ARC or can be installed directly as a permanent
>> 505 firmware replacement from floppy (which requires changing a certain
>> 506 jumper on the motherboard). If you want to do either of these, say N
>> 507 here. If MILO doesn't work on your system (true for Jensen
>> 508 motherboards), you can bypass it altogether and boot Linux directly
>> 509 from an SRM console; say Y here in order to do that. Note that you
>> 510 won't be able to boot from an IDE disk using SRM.
776 511
777 To compile this driver as a module, !! 512 If unsure, say N.
778 module will be called ap. <<
779 513
780 If unsure, say Y (default). !! 514 config EISA
>> 515 bool
>> 516 depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
>> 517 default y
781 518
782 config AP_DEBUG !! 519 config ARCH_MAY_HAVE_PC_FDC
783 def_bool n !! 520 def_bool y
784 prompt "Enable debug features for Adju <<
785 depends on AP <<
786 help <<
787 Say 'Y' here to enable some addition <<
788 Processor (ap) devices. <<
789 521
790 There will be some more sysfs attrib !! 522 config SMP
>> 523 bool "Symmetric multi-processing support"
>> 524 depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
>> 525 select USE_GENERIC_SMP_HELPERS
>> 526 ---help---
>> 527 This enables support for systems with more than one CPU. If you have
>> 528 a system with only one CPU, like most personal computers, say N. If
>> 529 you have a system with more than one CPU, say Y.
>> 530
>> 531 If you say N here, the kernel will run on single and multiprocessor
>> 532 machines, but will use only one CPU of a multiprocessor machine. If
>> 533 you say Y here, the kernel will run on many, but not all,
>> 534 singleprocessor machines. On a singleprocessor machine, the kernel
>> 535 will run faster if you say N here.
>> 536
>> 537 See also the SMP-HOWTO available at
>> 538 <http://www.tldp.org/docs.html#howto>.
>> 539
>> 540 If you don't know what to do here, say N.
>> 541
>> 542 config HAVE_DEC_LOCK
>> 543 bool
>> 544 depends on SMP
>> 545 default y
791 546
792 Do not enable on production level ke !! 547 config NR_CPUS
>> 548 int "Maximum number of CPUs (2-32)"
>> 549 range 2 32
>> 550 depends on SMP
>> 551 default "32" if ALPHA_GENERIC || ALPHA_MARVEL
>> 552 default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
>> 553 help
>> 554 MARVEL support can handle a maximum of 32 CPUs, all the others
>> 555 with working support have a maximum of 4 CPUs.
>> 556
>> 557 config ARCH_DISCONTIGMEM_ENABLE
>> 558 bool "Discontiguous Memory Support"
>> 559 help
>> 560 Say Y to support efficient handling of discontiguous physical memory,
>> 561 for architectures which are either NUMA (Non-Uniform Memory Access)
>> 562 or have huge holes in the physical address space for other reasons.
>> 563 See <file:Documentation/vm/numa> for more.
793 564
794 If unsure, say N. !! 565 source "mm/Kconfig"
795 566
796 config VFIO_CCW !! 567 config NUMA
797 def_tristate n !! 568 bool "NUMA Support (EXPERIMENTAL)"
798 prompt "Support for VFIO-CCW subchanne !! 569 depends on DISCONTIGMEM && BROKEN
799 depends on VFIO <<
800 select VFIO_MDEV <<
801 help <<
802 This driver allows usage of I/O subc <<
803 <<
804 To compile this driver as a module, <<
805 module will be called vfio_ccw. <<
806 <<
807 config VFIO_AP <<
808 def_tristate n <<
809 prompt "VFIO support for AP devices" <<
810 depends on KVM <<
811 depends on VFIO <<
812 depends on AP <<
813 select VFIO_MDEV <<
814 help 570 help
815 This driver grants access to Adjunct !! 571 Say Y to compile the kernel to support NUMA (Non-Uniform Memory
816 via the VFIO mediated device interfa !! 572 Access). This option is for configuring high-end multiprocessor
>> 573 server machines. If in doubt, say N.
817 574
818 To compile this driver as a module, !! 575 config NODES_SHIFT
819 will be called vfio_ap. !! 576 int
>> 577 default "7"
>> 578 depends on NEED_MULTIPLE_NODES
820 579
821 endmenu !! 580 # LARGE_VMALLOC is racy, if you *really* need it then fix it first
>> 581 config ALPHA_LARGE_VMALLOC
>> 582 bool
>> 583 ---help---
>> 584 Process creation and other aspects of virtual memory management can
>> 585 be streamlined if we restrict the kernel to one PGD for all vmalloc
>> 586 allocations. This equates to about 8GB.
>> 587
>> 588 Under normal circumstances, this is so far and above what is needed
>> 589 as to be laughable. However, there are certain applications (such
>> 590 as benchmark-grade in-kernel web serving) that can make use of as
>> 591 much vmalloc space as is available.
>> 592
>> 593 Say N unless you know you need gobs and gobs of vmalloc space.
>> 594
>> 595 config VERBOSE_MCHECK
>> 596 bool "Verbose Machine Checks"
>> 597
>> 598 config VERBOSE_MCHECK_ON
>> 599 int "Verbose Printing Mode (0=off, 1=on, 2=all)"
>> 600 depends on VERBOSE_MCHECK
>> 601 default 1
>> 602 ---help---
>> 603 This option allows the default printing mode to be set, and then
>> 604 possibly overridden by a boot command argument.
>> 605
>> 606 For example, if one wanted the option of printing verbose
>> 607 machine checks, but wanted the default to be as if verbose
>> 608 machine check printing was turned off, then one would choose
>> 609 the printing mode to be 0. Then, upon reboot, one could add
>> 610 the boot command line "verbose_mcheck=1" to get the normal
>> 611 verbose machine check printing, or "verbose_mcheck=2" to get
>> 612 the maximum information available.
822 613
823 config CCW !! 614 Take the default (1) unless you want more control or more info.
824 def_bool y <<
825 615
826 config HAVE_PNETID !! 616 config HZ
827 tristate !! 617 int
828 default (SMC || CCWGROUP) !! 618 default 1200 if ALPHA_RAWHIDE
>> 619 default 1024
829 620
830 menu "Virtualization" !! 621 source "drivers/pci/Kconfig"
>> 622 source "drivers/eisa/Kconfig"
831 623
832 config PFAULT !! 624 source "drivers/pcmcia/Kconfig"
833 def_bool y <<
834 prompt "Pseudo page fault support" <<
835 help <<
836 Select this option, if you want to u <<
837 handling under VM. If running native <<
838 has no effect. If your VM does not s <<
839 pseudo page fault handling will be u <<
840 Note that VM 4.2 supports PFAULT but <<
841 implementation that causes some prob <<
842 Everybody who wants to run Linux und <<
843 this option. <<
844 <<
845 config CMM <<
846 def_tristate n <<
847 prompt "Cooperative memory management" <<
848 help <<
849 Select this option, if you want to e <<
850 to reduce the memory size of the sys <<
851 by allocating pages of memory and pu <<
852 makes sense for a system running und <<
853 will be reused by VM for other guest <<
854 allows an external monitor to balanc <<
855 Everybody who wants to run Linux und <<
856 option. <<
857 625
858 config CMM_IUCV !! 626 config SRM_ENV
859 def_bool y !! 627 tristate "SRM environment through procfs"
860 prompt "IUCV special message interface !! 628 depends on PROC_FS
861 depends on CMM && (SMSGIUCV=y || CMM=S !! 629 ---help---
862 help !! 630 If you enable this option, a subdirectory inside /proc called
863 Select this option to enable the spe !! 631 /proc/srm_environment will give you access to the all important
864 the cooperative memory management. !! 632 SRM environment variables (those which have a name) and also
>> 633 to all others (by their internal number).
>> 634
>> 635 SRM is something like a BIOS for Alpha machines. There are some
>> 636 other such BIOSes, like AlphaBIOS, which this driver cannot
>> 637 support (hey, that's not SRM!).
>> 638
>> 639 Despite the fact that this driver doesn't work on all Alphas (but
>> 640 only on those which have SRM as their firmware), it's save to
>> 641 build it even if your particular machine doesn't know about SRM
>> 642 (or if you intend to compile a generic kernel). It will simply
>> 643 not create those subdirectory in /proc (and give you some warning,
>> 644 of course).
865 645
866 config APPLDATA_BASE !! 646 This driver is also available as a module and will be called
867 def_bool n !! 647 srm_env then.
868 prompt "Linux - VM Monitor Stream, bas <<
869 depends on PROC_SYSCTL <<
870 help <<
871 This provides a kernel interface for <<
872 monitor records. The monitor records <<
873 intervals, once the timer is started <<
874 Writing 1 or 0 to /proc/appldata/tim <<
875 i.e. enables or disables monitoring <<
876 A custom interval value (in seconds) <<
877 /proc/appldata/interval. <<
878 <<
879 Defaults are 60 seconds interval and <<
880 The /proc entries can also be read f <<
881 <<
882 config APPLDATA_MEM <<
883 def_tristate m <<
884 prompt "Monitor memory management stat <<
885 depends on APPLDATA_BASE && VM_EVENT_C <<
886 help <<
887 This provides memory management rela <<
888 Stream, like paging/swapping rate, m <<
889 Writing 1 or 0 to /proc/appldata/mem <<
890 APPLDATA monitor record, i.e. enable <<
891 on the z/VM side. <<
892 <<
893 Default is disabled. <<
894 The /proc entry can also be read fro <<
895 <<
896 This can also be compiled as a modul <<
897 appldata_mem.o. <<
898 <<
899 config APPLDATA_OS <<
900 def_tristate m <<
901 prompt "Monitor OS statistics" <<
902 depends on APPLDATA_BASE <<
903 help <<
904 This provides OS related data to the <<
905 CPU utilisation, etc. <<
906 Writing 1 or 0 to /proc/appldata/os <<
907 APPLDATA monitor record, i.e. enable <<
908 on the z/VM side. <<
909 <<
910 Default is disabled. <<
911 This can also be compiled as a modul <<
912 appldata_os.o. <<
913 <<
914 config APPLDATA_NET_SUM <<
915 def_tristate m <<
916 prompt "Monitor overall network statis <<
917 depends on APPLDATA_BASE && NET <<
918 help <<
919 This provides network related data t <<
920 currently there is only a total sum <<
921 per-interface data. <<
922 Writing 1 or 0 to /proc/appldata/net <<
923 APPLDATA monitor record, i.e. enable <<
924 on the z/VM side. <<
925 <<
926 Default is disabled. <<
927 This can also be compiled as a modul <<
928 appldata_net_sum.o. <<
929 648
930 config S390_HYPFS !! 649 source "fs/Kconfig.binfmt"
931 def_bool y <<
932 prompt "s390 hypervisor information" <<
933 help <<
934 This provides several binary files a <<
935 provide accounting information in an <<
936 650
937 config S390_HYPFS_FS !! 651 endmenu
938 def_bool n <<
939 prompt "s390 hypervisor file system su <<
940 select SYS_HYPERVISOR <<
941 depends on S390_HYPFS <<
942 help <<
943 This is a virtual file system intend <<
944 information in an s390 hypervisor en <<
945 is deprecated and should not be used <<
946 652
947 Say N if you are unsure. !! 653 source "net/Kconfig"
948 654
949 source "arch/s390/kvm/Kconfig" !! 655 source "drivers/Kconfig"
950 656
951 config S390_GUEST !! 657 source "fs/Kconfig"
952 def_bool y <<
953 prompt "s390 support for virtio device <<
954 select TTY <<
955 select VIRTUALIZATION <<
956 select VIRTIO <<
957 help <<
958 Enabling this option adds support fo <<
959 drivers on s390. <<
960 658
961 Select this option if you want to ru !! 659 source "arch/alpha/Kconfig.debug"
962 the KVM hypervisor. <<
963 660
964 endmenu !! 661 # DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
>> 662 # but we also need it if VGA_HOSE is set
>> 663 config DUMMY_CONSOLE
>> 664 bool
>> 665 depends on VGA_HOSE
>> 666 default y
965 667
966 config S390_MODULES_SANITY_TEST_HELPERS !! 668 source "security/Kconfig"
967 def_bool n <<
968 669
969 menu "Selftests" !! 670 source "crypto/Kconfig"
970 671
971 config S390_UNWIND_SELFTEST !! 672 source "lib/Kconfig"
972 def_tristate n <<
973 depends on KUNIT <<
974 default KUNIT_ALL_TESTS <<
975 prompt "Test unwind functions" <<
976 help <<
977 This option enables s390 specific st <<
978 module. This option is not useful fo <<
979 kernels, but only for kernel develop <<
980 <<
981 Say N if you are unsure. <<
982 <<
983 config S390_KPROBES_SANITY_TEST <<
984 def_tristate n <<
985 prompt "Enable s390 specific kprobes t <<
986 depends on KPROBES <<
987 depends on KUNIT <<
988 help <<
989 This option enables an s390 specific <<
990 is not useful for distributions or g <<
991 developers working on architecture c <<
992 <<
993 Say N if you are unsure. <<
994 <<
995 config S390_MODULES_SANITY_TEST <<
996 def_tristate n <<
997 depends on KUNIT <<
998 default KUNIT_ALL_TESTS <<
999 prompt "Enable s390 specific modules t <<
1000 select S390_MODULES_SANITY_TEST_HELPE <<
1001 help <<
1002 This option enables an s390 specifi <<
1003 not useful for distributions or gen <<
1004 kernel developers working on archit <<
1005 673
1006 Say N if you are unsure. <<
1007 endmenu <<
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.