1 # 1 #
2 # arch/sh/Makefile <<
3 # <<
4 # Copyright (C) 1999 Kaz Kojima <<
5 # Copyright (C) 2002 - 2008 Paul Mundt <<
6 # Copyright (C) 2002 M. R. Brown <<
7 # <<
8 # This file is subject to the terms and condit 2 # This file is subject to the terms and conditions of the GNU General Public
9 # License. See the file "COPYING" in the main 3 # License. See the file "COPYING" in the main directory of this archive
10 # for more details. 4 # for more details.
11 # 5 #
12 ifdef cross_compiling !! 6 # Copyright (C) 1994, 95, 96, 2003 by Ralf Baechle
>> 7 # DECStation modifications by Paul M. Antoine, 1996
>> 8 # Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki
>> 9 #
>> 10 # This file is included by the global makefile so that you can add your own
>> 11 # architecture-specific flags and dependencies. Remember to do have actions
>> 12 # for "archclean" cleaning up for this architecture.
>> 13 #
>> 14
>> 15 archscripts: scripts_basic
>> 16 $(Q)$(MAKE) $(build)=arch/mips/boot/tools relocs
>> 17
>> 18 KBUILD_DEFCONFIG := ip22_defconfig
>> 19
>> 20 #
>> 21 # Select the object file format to substitute into the linker script.
>> 22 #
>> 23 ifdef CONFIG_CPU_LITTLE_ENDIAN
>> 24 32bit-tool-archpref = mipsel
>> 25 64bit-tool-archpref = mips64el
>> 26 32bit-bfd = elf32-tradlittlemips
>> 27 64bit-bfd = elf64-tradlittlemips
>> 28 32bit-emul = elf32ltsmip
>> 29 64bit-emul = elf64ltsmip
>> 30 else
>> 31 32bit-tool-archpref = mips
>> 32 64bit-tool-archpref = mips64
>> 33 32bit-bfd = elf32-tradbigmips
>> 34 64bit-bfd = elf64-tradbigmips
>> 35 32bit-emul = elf32btsmip
>> 36 64bit-emul = elf64btsmip
>> 37 endif
>> 38
>> 39 ifdef CONFIG_32BIT
>> 40 tool-archpref = $(32bit-tool-archpref)
>> 41 UTS_MACHINE := mips
>> 42 endif
>> 43 ifdef CONFIG_64BIT
>> 44 tool-archpref = $(64bit-tool-archpref)
>> 45 UTS_MACHINE := mips64
>> 46 endif
>> 47
>> 48 ifneq ($(SUBARCH),$(ARCH))
13 ifeq ($(CROSS_COMPILE),) 49 ifeq ($(CROSS_COMPILE),)
14 CROSS_COMPILE := $(call cc-cross-prefix, s !! 50 CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- $(tool-archpref)-linux-gnu- $(tool-archpref)-unknown-linux-gnu-)
15 endif 51 endif
16 endif 52 endif
17 53
18 KBUILD_DEFCONFIG := shx3_defconfig !! 54 ifdef CONFIG_FUNCTION_GRAPH_TRACER
>> 55 ifndef KBUILD_MCOUNT_RA_ADDRESS
>> 56 ifeq ($(call cc-option-yn,-mmcount-ra-address), y)
>> 57 cflags-y += -mmcount-ra-address -DKBUILD_MCOUNT_RA_ADDRESS
>> 58 endif
>> 59 endif
>> 60 endif
>> 61 cflags-y += $(call cc-option, -mno-check-zero-division)
19 62
20 isa-y := any !! 63 ifdef CONFIG_32BIT
21 isa-$(CONFIG_SH_DSP) := sh !! 64 ld-emul = $(32bit-emul)
22 isa-$(CONFIG_CPU_SH2) := sh2 !! 65 vmlinux-32 = vmlinux
23 isa-$(CONFIG_CPU_SH2A) := sh2 !! 66 vmlinux-64 = vmlinux.64
24 isa-$(CONFIG_CPU_SH3) := sh3 !! 67
25 isa-$(CONFIG_CPU_SH4) := sh4 !! 68 cflags-y += -mabi=32
26 isa-$(CONFIG_CPU_SH4A) := sh4 !! 69 endif
27 isa-$(CONFIG_CPU_SH4AL_DSP) := sh4 !! 70
28 !! 71 ifdef CONFIG_64BIT
29 isa-$(CONFIG_SH_DSP) := $(i !! 72 ld-emul = $(64bit-emul)
30 isa-y := $(i !! 73 vmlinux-32 = vmlinux.32
31 !! 74 vmlinux-64 = vmlinux
32 cflags-$(CONFIG_CPU_SH2) := $(c !! 75
33 cflags-$(CONFIG_CPU_J2) += $(c !! 76 cflags-y += -mabi=64
34 cflags-$(CONFIG_CPU_SH2A) += $(c !! 77 endif
35 $(c !! 78
36 $(c !! 79 all-$(CONFIG_BOOT_ELF32) := $(vmlinux-32)
37 cflags-$(CONFIG_CPU_SH3) := $(c !! 80 all-$(CONFIG_BOOT_ELF64) := $(vmlinux-64)
38 cflags-$(CONFIG_CPU_SH4) := $(c !! 81 all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz
39 $(call cc-option,-mno-implicit-fp,-m4- !! 82
40 cflags-$(CONFIG_CPU_SH4A) += $(c !! 83 #
41 $(c !! 84 # GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel
42 cflags-$(CONFIG_CPU_SH4AL_DSP) += $(c !! 85 # code since it only slows down the whole thing. At some point we might make
43 !! 86 # use of global pointer optimizations but their use of $28 conflicts with
44 ifeq ($(cflags-y),) !! 87 # the current pointer optimization.
45 # !! 88 #
46 # In the case where we are stuck with a compil !! 89 # The DECStation requires an ECOFF kernel for remote booting, other MIPS
47 # restricted to a particular ISA, a favourite !! 90 # machines may also. Since BFD is incredibly buggy with respect to
48 # extensive multilib targets are not provided, !! 91 # crossformat linking we rely on the elf2ecoff tool for format conversion.
49 # regarding FP generation. This is intentional !! 92 #
50 # orders of magnitude less than GCC's default !! 93 cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
51 # with a large number of multilib targets bett !! 94 cflags-y += -msoft-float
52 # correctly for the target in mind. !! 95 LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
53 # !! 96 KBUILD_AFLAGS_MODULE += -mlong-calls
54 cflags-y += $(shell $(CC) $(KBUILD_CFLA !! 97 KBUILD_CFLAGS_MODULE += -mlong-calls
55 grep nofpu | sed q | sed !! 98
56 # At this point, anything goes. !! 99 ifeq ($(CONFIG_RELOCATABLE),y)
57 isaflags-y := $(call as-option,-Wa$(comma !! 100 LDFLAGS_vmlinux += --emit-relocs
58 else !! 101 endif
59 # <<
60 # -Wa,-isa= tuning implies -Wa,-dsp for the ve <<
61 # support it, while -Wa,-dsp by itself limits <<
62 # on certain CPU subtypes. Try the ISA variant <<
63 # fall back on -Wa,-dsp for the old binutils v <<
64 # opcodes, we always want the best ISA tuning <<
65 # will provide. <<
66 # <<
67 isaflags-y := $(call as-option,-Wa$(comma <<
68 <<
69 isaflags-$(CONFIG_SH_DSP) := \ <<
70 $(call as-option,-Wa$(comma)-isa=$(isa <<
71 endif <<
72 <<
73 cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb <<
74 cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml <<
75 <<
76 cflags-y += $(call cc-option,-mno-fdpic <<
77 cflags-y += $(isaflags-y) -ffreestandin <<
78 <<
79 OBJCOPYFLAGS := -O binary -R .note -R .note <<
80 -R .stab -R .stabstr -S <<
81 <<
82 # Give the various platforms the opportunity t <<
83 defaultimage-y <<
84 defaultimage-$(CONFIG_SH_SH7785LCR) <<
85 defaultimage-$(CONFIG_SH_RSK) <<
86 defaultimage-$(CONFIG_SH_URQUELL) <<
87 defaultimage-$(CONFIG_SH_MIGOR) <<
88 defaultimage-$(CONFIG_SH_AP325RXA) <<
89 defaultimage-$(CONFIG_SH_SH7757LCR) <<
90 defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE) <<
91 defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) <<
92 defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) <<
93 <<
94 # Set some sensible Kbuild defaults <<
95 boot := arch/sh/boot <<
96 KBUILD_IMAGE := $(boot)/$(defaultim <<
97 102
98 # 103 #
99 # Choosing incompatible machines durings confi !! 104 # pass -msoft-float to GAS if it supports it. However on newer binutils
100 # error messages during linking. !! 105 # (specifically newer than 2.24.51.20140728) we then also need to explicitly
>> 106 # set ".set hardfloat" in all files which manipulate floating point registers.
101 # 107 #
102 UTS_MACHINE := sh !! 108 ifneq ($(call as-option,-Wa$(comma)-msoft-float,),)
103 LDFLAGS_vmlinux += -e _stext !! 109 cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float
>> 110 endif
104 111
105 ifdef CONFIG_CPU_LITTLE_ENDIAN !! 112 cflags-y += -ffreestanding
106 ld-bfd := elf32-sh-linux !! 113
107 LDFLAGS_vmlinux += --defsym jiffies=ji !! 114 #
108 KBUILD_LDFLAGS += -EL !! 115 # We explicitly add the endianness specifier if needed, this allows
109 else !! 116 # to compile kernels with a toolchain for the other endianness. We
110 ld-bfd := elf32-shbig-linux !! 117 # carefully avoid to add it redundantly because gcc 3.3/3.4 complains
111 LDFLAGS_vmlinux += --defsym jiffies=ji !! 118 # when fed the toolchain default!
112 KBUILD_LDFLAGS += -EB !! 119 #
>> 120 # Certain gcc versions up to gcc 4.1.1 (probably 4.2-subversion as of
>> 121 # 2006-10-10 don't properly change the predefined symbols if -EB / -EL
>> 122 # are used, so we kludge that here. A bug has been filed at
>> 123 # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413.
>> 124 #
>> 125 undef-all += -UMIPSEB -U_MIPSEB -U__MIPSEB -U__MIPSEB__
>> 126 undef-all += -UMIPSEL -U_MIPSEL -U__MIPSEL -U__MIPSEL__
>> 127 predef-be += -DMIPSEB -D_MIPSEB -D__MIPSEB -D__MIPSEB__
>> 128 predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__
>> 129 cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be))
>> 130 cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le))
>> 131
>> 132 cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \
>> 133 -fno-omit-frame-pointer
>> 134
>> 135 # Some distribution-specific toolchains might pass the -fstack-check
>> 136 # option during the build, which adds a simple stack-probe at the beginning
>> 137 # of every function. This stack probe is to ensure that there is enough
>> 138 # stack space, else a SEGV is generated. This is not desirable for MIPS
>> 139 # as kernel stacks are small, placed in unmapped virtual memory, and do not
>> 140 # grow when overflowed. Especially on SGI IP27 platforms, this check will
>> 141 # lead to a NULL pointer dereference in _raw_spin_lock_irq.
>> 142 #
>> 143 # In disassembly, this stack probe appears at the top of a function as:
>> 144 # sd zero,<offset>(sp)
>> 145 # Where <offset> is a negative value.
>> 146 #
>> 147 cflags-y += -fno-stack-check
>> 148
>> 149 #
>> 150 # CPU-dependent compiler/assembler options for optimization.
>> 151 #
>> 152 cflags-$(CONFIG_CPU_R3000) += -march=r3000
>> 153 cflags-$(CONFIG_CPU_TX39XX) += -march=r3900
>> 154 cflags-$(CONFIG_CPU_R6000) += -march=r6000 -Wa,--trap
>> 155 cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap
>> 156 cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap
>> 157 cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap
>> 158 cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap
>> 159 cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
>> 160 -Wa,-mips32 -Wa,--trap
>> 161 cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
>> 162 -Wa,-mips32r2 -Wa,--trap
>> 163 cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap -modd-spreg
>> 164 cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
>> 165 -Wa,-mips64 -Wa,--trap
>> 166 cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
>> 167 -Wa,-mips64r2 -Wa,--trap
>> 168 cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap
>> 169 cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap
>> 170 cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \
>> 171 -Wa,--trap
>> 172 cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \
>> 173 -Wa,--trap
>> 174 cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \
>> 175 -Wa,--trap
>> 176 cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \
>> 177 -Wa,--trap
>> 178 cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \
>> 179 -Wa,--trap
>> 180 cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mdmx)
>> 181 cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mips3d)
>> 182 cflags-$(CONFIG_CPU_R8000) += -march=r8000 -Wa,--trap
>> 183 cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \
>> 184 -Wa,--trap
>> 185 cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += $(call cc-option,-march=octeon) -Wa,--trap
>> 186 ifeq (,$(findstring march=octeon, $(cflags-$(CONFIG_CPU_CAVIUM_OCTEON))))
>> 187 cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
113 endif 188 endif
>> 189 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
>> 190 cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap
114 191
115 export ld-bfd !! 192 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
>> 193 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
>> 194 cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,)
>> 195
>> 196 # For smartmips configurations, there are hundreds of warnings due to ISA overrides
>> 197 # in assembly and header files. smartmips is only supported for MIPS32r1 onwards
>> 198 # and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or
>> 199 # similar directives in the kernel will spam the build logs with the following warnings:
>> 200 # Warning: the `smartmips' extension requires MIPS32 revision 1 or greater
>> 201 # or
>> 202 # Warning: the 64-bit MIPS architecture does not support the `smartmips' extension
>> 203 # Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has
>> 204 # been fixed properly.
>> 205 mips-cflags := $(cflags-y)
>> 206 ifeq ($(CONFIG_CPU_HAS_SMARTMIPS),y)
>> 207 smartmips-ase := $(call cc-option-yn,$(mips-cflags) -msmartmips)
>> 208 cflags-$(smartmips-ase) += -msmartmips -Wa,--no-warn
>> 209 endif
>> 210 ifeq ($(CONFIG_CPU_MICROMIPS),y)
>> 211 micromips-ase := $(call cc-option-yn,$(mips-cflags) -mmicromips)
>> 212 cflags-$(micromips-ase) += -mmicromips
>> 213 endif
>> 214 ifeq ($(CONFIG_CPU_HAS_MSA),y)
>> 215 toolchain-msa := $(call cc-option-yn,$(mips-cflags) -mhard-float -mfp64 -Wa$(comma)-mmsa)
>> 216 cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA
>> 217 endif
>> 218 toolchain-virt := $(call cc-option-yn,$(mips-cflags) -mvirt)
>> 219 cflags-$(toolchain-virt) += -DTOOLCHAIN_SUPPORTS_VIRT
116 220
117 # Mach groups !! 221 #
118 machdir-$(CONFIG_SOLUTION_ENGINE) !! 222 # Firmware support
119 machdir-$(CONFIG_SH_DREAMCAST) !! 223 #
120 machdir-$(CONFIG_SH_SH03) !! 224 libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/
121 machdir-$(CONFIG_SH_MIGOR) !! 225 libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/
122 machdir-$(CONFIG_SH_KFR2R09) !! 226 libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/
123 machdir-$(CONFIG_SH_ECOVEC) !! 227 libs-y += arch/mips/fw/lib/
124 machdir-$(CONFIG_SH_SDK7786) <<
125 machdir-$(CONFIG_SH_X3PROTO) <<
126 machdir-$(CONFIG_SH_LANDISK) <<
127 machdir-y <<
128 228
129 # 229 #
130 # CPU header paths !! 230 # Kernel compression
131 # 231 #
132 # These are ordered by optimization level. A C !! 232 ifdef SYS_SUPPORTS_ZBOOT
133 # of another (ie, SH-2A / SH-2), is picked up !! 233 COMPRESSION_FNAME = vmlinuz
134 # levels of genericness if nothing more suitab !! 234 else
135 # hierarchy. !! 235 COMPRESSION_FNAME = vmlinux
>> 236 endif
>> 237
>> 238 #
>> 239 # Board-dependent options and extra files
136 # 240 #
137 # As an example, in order of preference, SH-2A !! 241 include arch/mips/Kbuild.platforms
>> 242
>> 243 ifdef CONFIG_PHYSICAL_START
>> 244 load-y = $(CONFIG_PHYSICAL_START)
>> 245 endif
>> 246
>> 247 entry-noisa-y = 0x$(shell $(NM) vmlinux 2>/dev/null \
>> 248 | grep "\bkernel_entry\b" | cut -f1 -d \ )
>> 249 ifdef CONFIG_CPU_MICROMIPS
>> 250 #
>> 251 # Set the ISA bit, since the kernel_entry symbol in the ELF will have it
>> 252 # clear which would lead to images containing addresses which bootloaders may
>> 253 # jump to as MIPS32 code.
>> 254 #
>> 255 entry-y = $(patsubst %0,%1,$(patsubst %2,%3,$(patsubst %4,%5, \
>> 256 $(patsubst %6,%7,$(patsubst %8,%9,$(patsubst %a,%b, \
>> 257 $(patsubst %c,%d,$(patsubst %e,%f,$(entry-noisa-y)))))))))
>> 258 else
>> 259 entry-y = $(entry-noisa-y)
>> 260 endif
>> 261
>> 262 cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic
>> 263 drivers-$(CONFIG_PCI) += arch/mips/pci/
>> 264
138 # 265 #
139 cpuincdir-$(CONFIG_CPU_SH2A) += cpu-sh2a !! 266 # Automatically detect the build format. By default we choose
140 cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2 !! 267 # the elf format according to the load address.
141 cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3 !! 268 # We can always force a build with a 64-bits symbol format by
142 cpuincdir-$(CONFIG_CPU_SH4A) += cpu-sh4a !! 269 # passing 'KBUILD_SYM32=no' option to the make's command line.
143 cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4 !! 270 #
144 cpuincdir-y += cpu-common !! 271 ifdef CONFIG_64BIT
>> 272 ifndef KBUILD_SYM32
>> 273 ifeq ($(shell expr $(load-y) \< 0xffffffff80000000), 0)
>> 274 KBUILD_SYM32 = y
>> 275 endif
>> 276 endif
>> 277
>> 278 ifeq ($(KBUILD_SYM32)$(call cc-option-yn,-msym32), yy)
>> 279 cflags-y += -msym32 -DKBUILD_64BIT_SYM32
>> 280 else
>> 281 ifeq ($(CONFIG_CPU_DADDI_WORKAROUNDS), y)
>> 282 $(error CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32)
>> 283 endif
>> 284 endif
>> 285 endif
>> 286
>> 287 KBUILD_AFLAGS += $(cflags-y)
>> 288 KBUILD_CFLAGS += $(cflags-y)
>> 289 KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
>> 290 KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
>> 291
>> 292 bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \
>> 293 VMLINUX_ENTRY_ADDRESS=$(entry-y) \
>> 294 PLATFORM="$(platform-y)"
>> 295 ifdef CONFIG_32BIT
>> 296 bootvars-y += ADDR_BITS=32
>> 297 endif
>> 298 ifdef CONFIG_64BIT
>> 299 bootvars-y += ADDR_BITS=64
>> 300 endif
>> 301
>> 302 LDFLAGS += -m $(ld-emul)
>> 303
>> 304 ifdef CONFIG_MIPS
>> 305 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
>> 306 egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
>> 307 sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
>> 308 ifdef CONFIG_64BIT
>> 309 CHECKFLAGS += -m64
>> 310 endif
>> 311 endif
>> 312
>> 313 OBJCOPYFLAGS += --remove-section=.reginfo
145 314
146 drivers-y += arch/sh/dri !! 315 head-y := arch/mips/kernel/head.o
147 316
148 KBUILD_CPPFLAGS += $(addprefix -I $(sr !! 317 libs-y += arch/mips/lib/
149 KBUILD_CFLAGS += -pipe $(cflags-y) !! 318 libs-y += arch/mips/math-emu/
150 KBUILD_AFLAGS += $(cflags-y) <<
151 319
152 ifeq ($(CONFIG_MCOUNT),y) !! 320 # See arch/mips/Kbuild for content of core part of the kernel
153 KBUILD_CFLAGS += -pg !! 321 core-y += arch/mips/
>> 322
>> 323 drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/
>> 324
>> 325 # suspend and hibernation support
>> 326 drivers-$(CONFIG_PM) += arch/mips/power/
>> 327
>> 328 # boot image targets (arch/mips/boot/)
>> 329 boot-y := vmlinux.bin
>> 330 boot-y += vmlinux.ecoff
>> 331 boot-y += vmlinux.srec
>> 332 ifeq ($(shell expr $(load-y) \< 0xffffffff80000000 2> /dev/null), 0)
>> 333 boot-y += uImage
>> 334 boot-y += uImage.bin
>> 335 boot-y += uImage.bz2
>> 336 boot-y += uImage.gz
>> 337 boot-y += uImage.lzma
>> 338 boot-y += uImage.lzo
>> 339 endif
>> 340 boot-y += vmlinux.itb
>> 341 boot-y += vmlinux.gz.itb
>> 342 boot-y += vmlinux.bz2.itb
>> 343 boot-y += vmlinux.lzma.itb
>> 344 boot-y += vmlinux.lzo.itb
>> 345
>> 346 # compressed boot image targets (arch/mips/boot/compressed/)
>> 347 bootz-y := vmlinuz
>> 348 bootz-y += vmlinuz.bin
>> 349 bootz-y += vmlinuz.ecoff
>> 350 bootz-y += vmlinuz.srec
>> 351 ifeq ($(shell expr $(zload-y) \< 0xffffffff80000000 2> /dev/null), 0)
>> 352 bootz-y += uzImage.bin
>> 353 endif
>> 354
>> 355 ifdef CONFIG_LASAT
>> 356 rom.bin rom.sw: vmlinux
>> 357 $(Q)$(MAKE) $(build)=arch/mips/lasat/image \
>> 358 $(bootvars-y) $@
154 endif 359 endif
155 360
156 ifeq ($(CONFIG_DWARF_UNWINDER),y) !! 361 #
157 KBUILD_CFLAGS += -fasynchronous-unwind-table !! 362 # Some machines like the Indy need 32-bit ELF binaries for booting purposes.
>> 363 # Other need ECOFF, so we build a 32-bit ELF binary for them which we then
>> 364 # convert to ECOFF using elf2ecoff.
>> 365 #
>> 366 quiet_cmd_32 = OBJCOPY $@
>> 367 cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
>> 368 vmlinux.32: vmlinux
>> 369 $(call cmd,32)
>> 370
>> 371 #
>> 372 # The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
>> 373 # ELF files from 32-bit files by conversion.
>> 374 #
>> 375 quiet_cmd_64 = OBJCOPY $@
>> 376 cmd_64 = $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
>> 377 vmlinux.64: vmlinux
>> 378 $(call cmd,64)
>> 379
>> 380 all: $(all-y)
>> 381
>> 382 # boot
>> 383 $(boot-y): $(vmlinux-32) FORCE
>> 384 $(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \
>> 385 $(bootvars-y) arch/mips/boot/$@
>> 386
>> 387 ifdef CONFIG_SYS_SUPPORTS_ZBOOT
>> 388 # boot/compressed
>> 389 $(bootz-y): $(vmlinux-32) FORCE
>> 390 $(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
>> 391 $(bootvars-y) 32bit-bfd=$(32bit-bfd) $@
>> 392 else
>> 393 vmlinuz: FORCE
>> 394 @echo ' CONFIG_SYS_SUPPORTS_ZBOOT is not enabled'
>> 395 /bin/false
158 endif 396 endif
159 397
160 libs-y := arch/sh/lib/ $(libs <<
161 398
162 BOOT_TARGETS = uImage uImage.bz2 uImage.gz uIm !! 399 CLEAN_FILES += vmlinux.32 vmlinux.64
163 uImage.srec uImage.bin zImage v <<
164 romImage <<
165 PHONY += $(BOOT_TARGETS) <<
166 400
167 all: $(notdir $(KBUILD_IMAGE)) !! 401 # device-trees
>> 402 core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
168 403
169 $(BOOT_TARGETS): vmlinux !! 404 %.dtb %.dtb.S %.dtb.o: | scripts
170 $(Q)$(MAKE) $(build)=$(boot) $(boot)/$ !! 405 $(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@
171 406
172 compressed: zImage !! 407 PHONY += dtbs
>> 408 dtbs: scripts
>> 409 $(Q)$(MAKE) $(build)=arch/mips/boot/dts
>> 410
>> 411 PHONY += dtbs_install
>> 412 dtbs_install:
>> 413 $(Q)$(MAKE) $(dtbinst)=arch/mips/boot/dts
173 414
174 archprepare: 415 archprepare:
175 $(Q)$(MAKE) $(build)=arch/sh/tools inc !! 416 ifdef CONFIG_MIPS32_N32
>> 417 @$(kecho) ' Checking missing-syscalls for N32'
>> 418 $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32"
>> 419 endif
>> 420 ifdef CONFIG_MIPS32_O32
>> 421 @$(kecho) ' Checking missing-syscalls for O32'
>> 422 $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32"
>> 423 endif
176 424
177 archheaders: !! 425 install:
178 $(Q)$(MAKE) $(build)=arch/sh/kernel/sy !! 426 $(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
>> 427 ifdef CONFIG_SYS_SUPPORTS_ZBOOT
>> 428 $(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE)
>> 429 endif
>> 430 $(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
>> 431 $(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
>> 432
>> 433 archclean:
>> 434 $(Q)$(MAKE) $(clean)=arch/mips/boot
>> 435 $(Q)$(MAKE) $(clean)=arch/mips/boot/compressed
>> 436 $(Q)$(MAKE) $(clean)=arch/mips/boot/tools
>> 437 $(Q)$(MAKE) $(clean)=arch/mips/lasat
179 438
180 define archhelp 439 define archhelp
181 @echo ' zImage - C !! 440 echo ' install - install kernel into $(INSTALL_PATH)'
182 @echo ' romImage - C !! 441 echo ' vmlinux.ecoff - ECOFF boot image'
183 @echo ' vmlinux.srec - C !! 442 echo ' vmlinux.bin - Raw binary boot image'
184 @echo ' vmlinux.bin - C !! 443 echo ' vmlinux.srec - SREC boot image'
185 @echo '* uImage - A !! 444 echo ' vmlinux.32 - 64-bit boot image wrapped in 32bits (IP22/IP32)'
186 @echo ' uImage.srec - C !! 445 echo ' vmlinuz - Compressed boot(zboot) image'
187 @echo ' uImage.bin - K !! 446 echo ' vmlinuz.ecoff - ECOFF zboot image'
188 @echo '* uImage.gz - K !! 447 echo ' vmlinuz.bin - Raw binary zboot image'
189 @echo ' uImage.bz2 - K !! 448 echo ' vmlinuz.srec - SREC zboot image'
190 @echo ' uImage.lzma - K !! 449 echo ' uImage - U-Boot image'
191 @echo ' uImage.xz - K !! 450 echo ' uImage.bin - U-Boot image (uncompressed)'
192 @echo ' uImage.lzo - K !! 451 echo ' uImage.bz2 - U-Boot image (bz2)'
>> 452 echo ' uImage.gz - U-Boot image (gzip)'
>> 453 echo ' uImage.lzma - U-Boot image (lzma)'
>> 454 echo ' uImage.lzo - U-Boot image (lzo)'
>> 455 echo ' uzImage.bin - U-Boot image (self-extracting)'
>> 456 echo ' dtbs - Device-tree blobs for enabled boards'
>> 457 echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
>> 458 echo
>> 459 echo ' These will be default as appropriate for a configured platform.'
>> 460 echo
>> 461 echo ' If you are targeting a system supported by generic kernels you may'
>> 462 echo ' configure the kernel for a given architecture target like so:'
>> 463 echo
>> 464 echo ' {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">'
>> 465 echo
>> 466 echo ' Otherwise, the following default configurations are available:'
>> 467 endef
>> 468
>> 469 generic_config_dir = $(srctree)/arch/$(ARCH)/configs/generic
>> 470 generic_defconfigs :=
>> 471
>> 472 #
>> 473 # If the user generates a generic kernel configuration without specifying a
>> 474 # list of boards to include the config fragments for, default to including all
>> 475 # available board config fragments.
>> 476 #
>> 477 ifeq ($(BOARDS),)
>> 478 BOARDS = $(patsubst board-%.config,%,$(notdir $(wildcard $(generic_config_dir)/board-*.config)))
>> 479 endif
>> 480
>> 481 #
>> 482 # Generic kernel configurations which merge generic_defconfig with the
>> 483 # appropriate config fragments from arch/mips/configs/generic/, resulting in
>> 484 # the ability to easily configure the kernel for a given architecture,
>> 485 # endianness & set of boards without duplicating the needed configuration in
>> 486 # hundreds of defconfig files.
>> 487 #
>> 488 define gen_generic_defconfigs
>> 489 $(foreach bits,$(1),$(foreach rev,$(2),$(foreach endian,$(3),
>> 490 target := $(bits)$(rev)$(filter el,$(endian))_defconfig
>> 491 generic_defconfigs += $$(target)
>> 492 $$(target): $(generic_config_dir)/$(bits)$(rev).config
>> 493 $$(target): $(generic_config_dir)/$(endian).config
>> 494 )))
193 endef 495 endef
>> 496
>> 497 $(eval $(call gen_generic_defconfigs,32 64,r1 r2 r6,eb el))
>> 498 $(eval $(call gen_generic_defconfigs,micro32,r2,eb el))
>> 499
>> 500 .PHONY: $(generic_defconfigs)
>> 501 $(generic_defconfigs):
>> 502 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
>> 503 -m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/generic_defconfig $^ \
>> 504 $(foreach board,$(BOARDS),$(generic_config_dir)/board-$(board).config)
>> 505 $(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
>> 506
>> 507 #
>> 508 # Prevent generic merge_config rules attempting to merge single fragments
>> 509 #
>> 510 $(generic_config_dir)/%.config: ;
>> 511
>> 512 #
>> 513 # Legacy defconfig compatibility - these targets used to be real defconfigs but
>> 514 # now that the boards have been converted to use the generic kernel they are
>> 515 # wrappers around the generic rules above.
>> 516 #
>> 517 .PHONY: sead3_defconfig
>> 518 sead3_defconfig:
>> 519 $(Q)$(MAKE) -f $(srctree)/Makefile 32r2el_defconfig BOARDS=sead-3
>> 520
>> 521 .PHONY: sead3micro_defconfig
>> 522 sead3micro_defconfig:
>> 523 $(Q)$(MAKE) -f $(srctree)/Makefile micro32r2el_defconfig BOARDS=sead-3
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.