1 // SPDX-License-Identifier: GPL-2.0 !! 1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* 2 /*
3 * The idle loop for all SuperH platforms. !! 3 * MIPS idle loop and WAIT instruction support.
4 * 4 *
5 * Copyright (C) 2002 - 2009 Paul Mundt !! 5 * Copyright (C) xxxx the Anonymous
>> 6 * Copyright (C) 1994 - 2006 Ralf Baechle
>> 7 * Copyright (C) 2003, 2004 Maciej W. Rozycki
>> 8 * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
6 */ 9 */
7 #include <linux/cpu.h> 10 #include <linux/cpu.h>
8 #include <linux/module.h> !! 11 #include <linux/export.h>
9 #include <linux/init.h> 12 #include <linux/init.h>
10 #include <linux/mm.h> <<
11 #include <linux/pm.h> <<
12 #include <linux/tick.h> <<
13 #include <linux/preempt.h> <<
14 #include <linux/thread_info.h> <<
15 #include <linux/irqflags.h> 13 #include <linux/irqflags.h>
16 #include <linux/smp.h> !! 14 #include <linux/printk.h>
17 #include <linux/atomic.h> !! 15 #include <linux/sched.h>
18 #include <asm/processor.h> !! 16 #include <asm/cpu.h>
19 #include <asm/smp.h> !! 17 #include <asm/cpu-info.h>
20 #include <asm/bl_bit.h> !! 18 #include <asm/cpu-type.h>
>> 19 #include <asm/idle.h>
>> 20 #include <asm/mipsregs.h>
21 21
22 static void (*sh_idle)(void); !! 22 /*
>> 23 * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
>> 24 * the implementation of the "wait" feature differs between CPU families. This
>> 25 * points to the function that implements CPU specific wait.
>> 26 * The wait instruction stops the pipeline and reduces the power consumption of
>> 27 * the CPU very much.
>> 28 */
>> 29 void (*cpu_wait)(void);
>> 30 EXPORT_SYMBOL(cpu_wait);
23 31
24 void default_idle(void) !! 32 static void __cpuidle r3081_wait(void)
25 { 33 {
26 set_bl_bit(); !! 34 unsigned long cfg = read_c0_conf();
27 raw_local_irq_enable(); !! 35 write_c0_conf(cfg | R30XX_CONF_HALT);
28 /* Isn't this racy ? */ !! 36 local_irq_enable();
29 cpu_sleep(); <<
30 raw_local_irq_disable(); <<
31 clear_bl_bit(); <<
32 } 37 }
33 38
34 void __noreturn arch_cpu_idle_dead(void) !! 39 static void __cpuidle r39xx_wait(void)
35 { 40 {
36 play_dead(); !! 41 if (!need_resched())
>> 42 write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
>> 43 local_irq_enable();
37 } 44 }
38 45
39 void arch_cpu_idle(void) !! 46 void __cpuidle r4k_wait(void)
>> 47 {
>> 48 local_irq_enable();
>> 49 __r4k_wait();
>> 50 }
>> 51
>> 52 /*
>> 53 * This variant is preferable as it allows testing need_resched and going to
>> 54 * sleep depending on the outcome atomically. Unfortunately the "It is
>> 55 * implementation-dependent whether the pipeline restarts when a non-enabled
>> 56 * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
>> 57 * using this version a gamble.
>> 58 */
>> 59 void __cpuidle r4k_wait_irqoff(void)
>> 60 {
>> 61 if (!need_resched())
>> 62 __asm__(
>> 63 " .set push \n"
>> 64 " .set arch=r4000 \n"
>> 65 " wait \n"
>> 66 " .set pop \n");
>> 67 local_irq_enable();
>> 68 }
>> 69
>> 70 /*
>> 71 * The RM7000 variant has to handle erratum 38. The workaround is to not
>> 72 * have any pending stores when the WAIT instruction is executed.
>> 73 */
>> 74 static void __cpuidle rm7k_wait_irqoff(void)
>> 75 {
>> 76 if (!need_resched())
>> 77 __asm__(
>> 78 " .set push \n"
>> 79 " .set arch=r4000 \n"
>> 80 " .set noat \n"
>> 81 " mfc0 $1, $12 \n"
>> 82 " sync \n"
>> 83 " mtc0 $1, $12 # stalls until W stage \n"
>> 84 " wait \n"
>> 85 " mtc0 $1, $12 # stalls until W stage \n"
>> 86 " .set pop \n");
>> 87 local_irq_enable();
>> 88 }
>> 89
>> 90 /*
>> 91 * Au1 'wait' is only useful when the 32kHz counter is used as timer,
>> 92 * since coreclock (and the cp0 counter) stops upon executing it. Only an
>> 93 * interrupt can wake it, so they must be enabled before entering idle modes.
>> 94 */
>> 95 static void __cpuidle au1k_wait(void)
>> 96 {
>> 97 unsigned long c0status = read_c0_status() | 1; /* irqs on */
>> 98
>> 99 __asm__(
>> 100 " .set push \n"
>> 101 " .set arch=r4000 \n"
>> 102 " cache 0x14, 0(%0) \n"
>> 103 " cache 0x14, 32(%0) \n"
>> 104 " sync \n"
>> 105 " mtc0 %1, $12 \n" /* wr c0status */
>> 106 " wait \n"
>> 107 " nop \n"
>> 108 " nop \n"
>> 109 " nop \n"
>> 110 " nop \n"
>> 111 " .set pop \n"
>> 112 : : "r" (au1k_wait), "r" (c0status));
>> 113 }
>> 114
>> 115 static int __initdata nowait;
>> 116
>> 117 static int __init wait_disable(char *s)
40 { 118 {
41 sh_idle(); !! 119 nowait = 1;
>> 120
>> 121 return 1;
42 } 122 }
43 123
44 void __init select_idle_routine(void) !! 124 __setup("nowait", wait_disable);
>> 125
>> 126 void __init check_wait(void)
45 { 127 {
>> 128 struct cpuinfo_mips *c = ¤t_cpu_data;
>> 129
>> 130 if (nowait) {
>> 131 printk("Wait instruction disabled.\n");
>> 132 return;
>> 133 }
>> 134
46 /* 135 /*
47 * If a platform has set its own idle !! 136 * MIPSr6 specifies that masked interrupts should unblock an executing
>> 137 * wait instruction, and thus that it is safe for us to use
>> 138 * r4k_wait_irqoff. Yippee!
48 */ 139 */
49 if (!sh_idle) !! 140 if (cpu_has_mips_r6) {
50 sh_idle = default_idle; !! 141 cpu_wait = r4k_wait_irqoff;
>> 142 return;
>> 143 }
>> 144
>> 145 switch (current_cpu_type()) {
>> 146 case CPU_R3081:
>> 147 case CPU_R3081E:
>> 148 cpu_wait = r3081_wait;
>> 149 break;
>> 150 case CPU_TX3927:
>> 151 cpu_wait = r39xx_wait;
>> 152 break;
>> 153 case CPU_R4200:
>> 154 case CPU_R4600:
>> 155 case CPU_R4640:
>> 156 case CPU_R4650:
>> 157 case CPU_R4700:
>> 158 case CPU_R5000:
>> 159 case CPU_R5500:
>> 160 case CPU_NEVADA:
>> 161 case CPU_4KC:
>> 162 case CPU_4KEC:
>> 163 case CPU_4KSC:
>> 164 case CPU_5KC:
>> 165 case CPU_5KE:
>> 166 case CPU_25KF:
>> 167 case CPU_PR4450:
>> 168 case CPU_BMIPS3300:
>> 169 case CPU_BMIPS4350:
>> 170 case CPU_BMIPS4380:
>> 171 case CPU_CAVIUM_OCTEON:
>> 172 case CPU_CAVIUM_OCTEON_PLUS:
>> 173 case CPU_CAVIUM_OCTEON2:
>> 174 case CPU_CAVIUM_OCTEON3:
>> 175 case CPU_XBURST:
>> 176 case CPU_LOONGSON32:
>> 177 case CPU_XLR:
>> 178 case CPU_XLP:
>> 179 cpu_wait = r4k_wait;
>> 180 break;
>> 181 case CPU_LOONGSON64:
>> 182 if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >=
>> 183 (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0))
>> 184 cpu_wait = r4k_wait;
>> 185 break;
>> 186
>> 187 case CPU_BMIPS5000:
>> 188 cpu_wait = r4k_wait_irqoff;
>> 189 break;
>> 190 case CPU_RM7000:
>> 191 cpu_wait = rm7k_wait_irqoff;
>> 192 break;
>> 193
>> 194 case CPU_PROAPTIV:
>> 195 case CPU_P5600:
>> 196 /*
>> 197 * Incoming Fast Debug Channel (FDC) data during a wait
>> 198 * instruction causes the wait never to resume, even if an
>> 199 * interrupt is received. Avoid using wait at all if FDC data is
>> 200 * likely to be received.
>> 201 */
>> 202 if (IS_ENABLED(CONFIG_MIPS_EJTAG_FDC_TTY))
>> 203 break;
>> 204 /* fall through */
>> 205 case CPU_M14KC:
>> 206 case CPU_M14KEC:
>> 207 case CPU_24K:
>> 208 case CPU_34K:
>> 209 case CPU_1004K:
>> 210 case CPU_1074K:
>> 211 case CPU_INTERAPTIV:
>> 212 case CPU_M5150:
>> 213 case CPU_QEMU_GENERIC:
>> 214 cpu_wait = r4k_wait;
>> 215 if (read_c0_config7() & MIPS_CONF7_WII)
>> 216 cpu_wait = r4k_wait_irqoff;
>> 217 break;
>> 218
>> 219 case CPU_74K:
>> 220 cpu_wait = r4k_wait;
>> 221 if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
>> 222 cpu_wait = r4k_wait_irqoff;
>> 223 break;
>> 224
>> 225 case CPU_TX49XX:
>> 226 cpu_wait = r4k_wait_irqoff;
>> 227 break;
>> 228 case CPU_ALCHEMY:
>> 229 cpu_wait = au1k_wait;
>> 230 break;
>> 231 case CPU_20KC:
>> 232 /*
>> 233 * WAIT on Rev1.0 has E1, E2, E3 and E16.
>> 234 * WAIT on Rev2.0 and Rev3.0 has E16.
>> 235 * Rev3.1 WAIT is nop, why bother
>> 236 */
>> 237 if ((c->processor_id & 0xff) <= 0x64)
>> 238 break;
>> 239
>> 240 /*
>> 241 * Another rev is incremeting c0_count at a reduced clock
>> 242 * rate while in WAIT mode. So we basically have the choice
>> 243 * between using the cp0 timer as clocksource or avoiding
>> 244 * the WAIT instruction. Until more details are known,
>> 245 * disable the use of WAIT for 20Kc entirely.
>> 246 cpu_wait = r4k_wait;
>> 247 */
>> 248 break;
>> 249 default:
>> 250 break;
>> 251 }
51 } 252 }
52 253
53 void stop_this_cpu(void *unused) !! 254 void arch_cpu_idle(void)
54 { 255 {
55 local_irq_disable(); !! 256 if (cpu_wait)
56 set_cpu_online(smp_processor_id(), fal !! 257 cpu_wait();
>> 258 else
>> 259 local_irq_enable();
>> 260 }
>> 261
>> 262 #ifdef CONFIG_CPU_IDLE
57 263
58 for (;;) !! 264 int mips_cpuidle_wait_enter(struct cpuidle_device *dev,
59 cpu_sleep(); !! 265 struct cpuidle_driver *drv, int index)
>> 266 {
>> 267 arch_cpu_idle();
>> 268 return index;
60 } 269 }
>> 270
>> 271 #endif
61 272
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.