1 # SPDX-License-Identifier: GPL-2.0 !! 1 # SPDX-License-Identifier: GPL-2.0-only
2 config XTENSA !! 2 config 64BIT
3 def_bool y !! 3 bool "64-bit kernel" if "$(ARCH)" = "sparc"
4 select ARCH_32BIT_OFF_T !! 4 default "$(ARCH)" = "sparc64"
5 select ARCH_HAS_CPU_CACHE_ALIASING !! 5 help
6 select ARCH_HAS_BINFMT_FLAT if !MMU !! 6 SPARC is a family of RISC microprocessors designed and marketed by
7 select ARCH_HAS_CURRENT_STACK_POINTER !! 7 Sun Microsystems, incorporated. They are very widely found in Sun
8 select ARCH_HAS_DEBUG_VM_PGTABLE !! 8 workstations and clones.
9 select ARCH_HAS_DMA_PREP_COHERENT if M !! 9
10 select ARCH_HAS_GCOV_PROFILE_ALL !! 10 Say yes to build a 64-bit kernel - formerly known as sparc64
11 select ARCH_HAS_KCOV !! 11 Say no to build a 32-bit kernel - formerly known as sparc
12 select ARCH_HAS_SYNC_DMA_FOR_CPU if MM !! 12
13 select ARCH_HAS_SYNC_DMA_FOR_DEVICE if !! 13 config SPARC
14 select ARCH_HAS_DMA_SET_UNCACHED if MM !! 14 bool
15 select ARCH_HAS_STRNCPY_FROM_USER if ! !! 15 default y
16 select ARCH_HAS_STRNLEN_USER !! 16 select ARCH_MIGHT_HAVE_PC_PARPORT if SPARC64 && PCI
17 select ARCH_NEED_CMPXCHG_1_EMU !! 17 select ARCH_MIGHT_HAVE_PC_SERIO
18 select ARCH_USE_MEMTEST !! 18 select DMA_OPS
19 select ARCH_USE_QUEUED_RWLOCKS !! 19 select OF
20 select ARCH_USE_QUEUED_SPINLOCKS !! 20 select OF_PROMTREE
21 select ARCH_WANT_IPC_PARSE_VERSION <<
22 select BUILDTIME_TABLE_SORT <<
23 select CLONE_BACKWARDS <<
24 select COMMON_CLK <<
25 select DMA_NONCOHERENT_MMAP if MMU <<
26 select GENERIC_ATOMIC64 <<
27 select GENERIC_IRQ_SHOW <<
28 select GENERIC_LIB_CMPDI2 <<
29 select GENERIC_LIB_MULDI3 <<
30 select GENERIC_LIB_UCMPDI2 <<
31 select GENERIC_PCI_IOMAP <<
32 select GENERIC_SCHED_CLOCK <<
33 select GENERIC_IOREMAP if MMU <<
34 select HAVE_ARCH_AUDITSYSCALL <<
35 select HAVE_ARCH_JUMP_LABEL if !XIP_KE <<
36 select HAVE_ARCH_KASAN if MMU && !XIP_ <<
37 select HAVE_ARCH_KCSAN <<
38 select HAVE_ARCH_SECCOMP_FILTER <<
39 select HAVE_ARCH_TRACEHOOK <<
40 select HAVE_ASM_MODVERSIONS 21 select HAVE_ASM_MODVERSIONS
41 select HAVE_CONTEXT_TRACKING_USER !! 22 select HAVE_IDE
42 select HAVE_DEBUG_KMEMLEAK !! 23 select HAVE_OPROFILE
43 select HAVE_DMA_CONTIGUOUS !! 24 select HAVE_ARCH_KGDB if !SMP || SPARC64
>> 25 select HAVE_ARCH_TRACEHOOK
44 select HAVE_EXIT_THREAD 26 select HAVE_EXIT_THREAD
45 select HAVE_FUNCTION_TRACER <<
46 select HAVE_GCC_PLUGINS if GCC_VERSION <<
47 select HAVE_HW_BREAKPOINT if PERF_EVEN <<
48 select HAVE_IRQ_TIME_ACCOUNTING <<
49 select HAVE_PAGE_SIZE_4KB <<
50 select HAVE_PCI 27 select HAVE_PCI
51 select HAVE_PERF_EVENTS !! 28 select SYSCTL_EXCEPTION_TRACE
52 select HAVE_STACKPROTECTOR !! 29 select RTC_CLASS
53 select HAVE_SYSCALL_TRACEPOINTS !! 30 select RTC_DRV_M48T59
54 select HAVE_VIRT_CPU_ACCOUNTING_GEN !! 31 select RTC_SYSTOHC
55 select IRQ_DOMAIN !! 32 select HAVE_ARCH_JUMP_LABEL if SPARC64
56 select LOCK_MM_AND_FIND_VMA !! 33 select GENERIC_IRQ_SHOW
>> 34 select ARCH_WANT_IPC_PARSE_VERSION
>> 35 select GENERIC_PCI_IOMAP
>> 36 select HAVE_NMI_WATCHDOG if SPARC64
>> 37 select HAVE_CBPF_JIT if SPARC32
>> 38 select HAVE_EBPF_JIT if SPARC64
>> 39 select HAVE_DEBUG_BUGVERBOSE
>> 40 select GENERIC_SMP_IDLE_THREAD
>> 41 select GENERIC_CLOCKEVENTS
>> 42 select GENERIC_STRNCPY_FROM_USER
>> 43 select GENERIC_STRNLEN_USER
57 select MODULES_USE_ELF_RELA 44 select MODULES_USE_ELF_RELA
58 select PERF_USE_VMALLOC !! 45 select PCI_SYSCALL if PCI
59 select TRACE_IRQFLAGS_SUPPORT !! 46 select ODD_RT_SIGACTION
60 help !! 47 select OLD_SIGSUSPEND
61 Xtensa processors are 32-bit RISC ma !! 48 select CPU_NO_EFFICIENT_FFS
62 primarily for embedded systems. The !! 49 select LOCKDEP_SMALL if LOCKDEP
63 configurable and extensible. The Li !! 50 select NEED_DMA_MAP_STATE
64 architecture supports all processor !! 51 select NEED_SG_DMA_LENGTH
65 with reasonable minimum requirements <<
66 a home page at <http://www.linux-xte <<
67 <<
68 config GENERIC_HWEIGHT <<
69 def_bool y <<
70 52
71 config ARCH_HAS_ILOG2_U32 !! 53 config SPARC32
72 def_bool n !! 54 def_bool !64BIT
73 !! 55 select ARCH_32BIT_OFF_T
74 config ARCH_HAS_ILOG2_U64 !! 56 select ARCH_HAS_SYNC_DMA_FOR_CPU
75 def_bool n !! 57 select GENERIC_ATOMIC64
76 !! 58 select CLZ_TAB
77 config ARCH_MTD_XIP !! 59 select HAVE_UID16
78 def_bool y !! 60 select OLD_SIGACTION
79 <<
80 config NO_IOPORT_MAP <<
81 def_bool n <<
82 61
83 config HZ !! 62 config SPARC64
84 int !! 63 def_bool 64BIT
85 default 100 !! 64 select HAVE_FUNCTION_TRACER
>> 65 select HAVE_FUNCTION_GRAPH_TRACER
>> 66 select HAVE_KRETPROBES
>> 67 select HAVE_KPROBES
>> 68 select MMU_GATHER_RCU_TABLE_FREE if SMP
>> 69 select HAVE_ARCH_TRANSPARENT_HUGEPAGE
>> 70 select HAVE_DYNAMIC_FTRACE
>> 71 select HAVE_FTRACE_MCOUNT_RECORD
>> 72 select HAVE_SYSCALL_TRACEPOINTS
>> 73 select HAVE_CONTEXT_TRACKING
>> 74 select HAVE_TIF_NOHZ
>> 75 select HAVE_DEBUG_KMEMLEAK
>> 76 select IOMMU_HELPER
>> 77 select SPARSE_IRQ
>> 78 select RTC_DRV_CMOS
>> 79 select RTC_DRV_BQ4802
>> 80 select RTC_DRV_SUN4V
>> 81 select RTC_DRV_STARFIRE
>> 82 select HAVE_PERF_EVENTS
>> 83 select PERF_USE_VMALLOC
>> 84 select ARCH_HAVE_NMI_SAFE_CMPXCHG
>> 85 select HAVE_C_RECORDMCOUNT
>> 86 select HAVE_ARCH_AUDITSYSCALL
>> 87 select ARCH_SUPPORTS_ATOMIC_RMW
>> 88 select HAVE_NMI
>> 89 select HAVE_REGS_AND_STACK_ACCESS_API
>> 90 select ARCH_USE_QUEUED_RWLOCKS
>> 91 select ARCH_USE_QUEUED_SPINLOCKS
>> 92 select GENERIC_TIME_VSYSCALL
>> 93 select ARCH_CLOCKSOURCE_DATA
>> 94 select ARCH_HAS_PTE_SPECIAL
>> 95 select PCI_DOMAINS if PCI
>> 96 select ARCH_HAS_GIGANTIC_PAGE
86 97
87 config LOCKDEP_SUPPORT !! 98 config ARCH_PROC_KCORE_TEXT
88 def_bool y 99 def_bool y
89 100
90 config STACKTRACE_SUPPORT !! 101 config CPU_BIG_ENDIAN
91 def_bool y 102 def_bool y
92 103
93 config MMU !! 104 config ARCH_ATU
94 def_bool n !! 105 bool
95 select PFAULT !! 106 default y if SPARC64
96 <<
97 config HAVE_XTENSA_GPIO32 <<
98 def_bool n <<
99 <<
100 config KASAN_SHADOW_OFFSET <<
101 hex <<
102 default 0x6e400000 <<
103 <<
104 config CPU_BIG_ENDIAN <<
105 def_bool $(success,test "$(shell,echo <<
106 107
107 config CPU_LITTLE_ENDIAN !! 108 config STACKTRACE_SUPPORT
108 def_bool !CPU_BIG_ENDIAN !! 109 bool
>> 110 default y if SPARC64
109 111
110 config CC_HAVE_CALL0_ABI !! 112 config LOCKDEP_SUPPORT
111 def_bool $(success,test "$(shell,echo !! 113 bool
>> 114 default y if SPARC64
112 115
113 menu "Processor type and features" !! 116 config ARCH_HIBERNATION_POSSIBLE
>> 117 def_bool y if SPARC64
114 118
115 choice !! 119 config AUDIT_ARCH
116 prompt "Xtensa Processor Configuration !! 120 bool
117 default XTENSA_VARIANT_FSF !! 121 default y
118 <<
119 config XTENSA_VARIANT_FSF <<
120 bool "fsf - default (not generic) conf <<
121 select MMU <<
122 <<
123 config XTENSA_VARIANT_DC232B <<
124 bool "dc232b - Diamond 232L Standard C <<
125 select MMU <<
126 select HAVE_XTENSA_GPIO32 <<
127 help <<
128 This variant refers to Tensilica's D <<
129 <<
130 config XTENSA_VARIANT_DC233C <<
131 bool "dc233c - Diamond 233L Standard C <<
132 select MMU <<
133 select HAVE_XTENSA_GPIO32 <<
134 help <<
135 This variant refers to Tensilica's D <<
136 <<
137 config XTENSA_VARIANT_CUSTOM <<
138 bool "Custom Xtensa processor configur <<
139 select HAVE_XTENSA_GPIO32 <<
140 help <<
141 Select this variant to use a custom <<
142 You will be prompted for a processor <<
143 endchoice <<
144 <<
145 config XTENSA_VARIANT_CUSTOM_NAME <<
146 string "Xtensa Processor Custom Core V <<
147 depends on XTENSA_VARIANT_CUSTOM <<
148 help <<
149 Provide the name of a custom Xtensa <<
150 This CORENAME selects arch/xtensa/va <<
151 Don't forget you have to select MMU <<
152 <<
153 config XTENSA_VARIANT_NAME <<
154 string <<
155 default "dc232b" <<
156 default "dc233c" <<
157 default "fsf" <<
158 default XTENSA_VARIANT_CUSTOM_NAME <<
159 <<
160 config XTENSA_VARIANT_MMU <<
161 bool "Core variant has a Full MMU (TLB <<
162 depends on XTENSA_VARIANT_CUSTOM <<
163 default y <<
164 select MMU <<
165 help <<
166 Build a Conventional Kernel with ful <<
167 ie: it supports a TLB with auto-load <<
168 <<
169 config XTENSA_VARIANT_HAVE_PERF_EVENTS <<
170 bool "Core variant has Performance Mon <<
171 depends on XTENSA_VARIANT_CUSTOM <<
172 default n <<
173 help <<
174 Enable if core variant has Performan <<
175 External Registers Interface. <<
176 122
177 If unsure, say N. !! 123 config HAVE_SETUP_PER_CPU_AREA
>> 124 def_bool y if SPARC64
178 125
179 config XTENSA_FAKE_NMI !! 126 config NEED_PER_CPU_EMBED_FIRST_CHUNK
180 bool "Treat PMM IRQ as NMI" !! 127 def_bool y if SPARC64
181 depends on XTENSA_VARIANT_HAVE_PERF_EV <<
182 default n <<
183 help <<
184 If PMM IRQ is the only IRQ at EXCM l <<
185 treat it as NMI, which improves accu <<
186 <<
187 If there are other interrupts at or <<
188 but not above the EXCM level, PMM IR <<
189 but only if these IRQs are not used. <<
190 saying that this is not safe, and a <<
191 actually fire. <<
192 128
193 If unsure, say N. !! 129 config NEED_PER_CPU_PAGE_FIRST_CHUNK
>> 130 def_bool y if SPARC64
194 131
195 config PFAULT !! 132 config MMU
196 bool "Handle protection faults" if EXP !! 133 bool
197 default y 134 default y
198 help <<
199 Handle protection faults. MMU config <<
200 noMMU configurations may disable it <<
201 generates protection faults or fault <<
202 135
203 If unsure, say Y. !! 136 config HIGHMEM
204 !! 137 bool
205 config XTENSA_UNALIGNED_USER !! 138 default y if SPARC32
206 bool "Unaligned memory access in user <<
207 help <<
208 The Xtensa architecture currently do <<
209 memory accesses in hardware but thro <<
210 Per default, unaligned memory access <<
211 139
212 Say Y here to enable unaligned memor !! 140 config ZONE_DMA
>> 141 bool
>> 142 default y if SPARC32
213 143
214 config XTENSA_LOAD_STORE !! 144 config GENERIC_ISA_DMA
215 bool "Load/store exception handler for !! 145 bool
216 help !! 146 default y if SPARC32
217 The Xtensa architecture only allows <<
218 instruction bus with l32r and l32i i <<
219 instructions raise an exception with <<
220 This makes it hard to use some confi <<
221 literals in FLASH memory attached to <<
222 147
223 Say Y here to enable exception handl !! 148 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
224 byte and 2-byte access to memory att !! 149 def_bool y if SPARC64
225 150
226 config HAVE_SMP !! 151 config PGTABLE_LEVELS
227 bool "System Supports SMP (MX)" !! 152 default 4 if 64BIT
228 depends on XTENSA_VARIANT_CUSTOM !! 153 default 3
229 select XTENSA_MX <<
230 help <<
231 This option is used to indicate that <<
232 supports Multiprocessing. Multiproce <<
233 the CPU core definition and currentl <<
234 154
235 Multiprocessor support is implemente !! 155 config ARCH_SUPPORTS_UPROBES
236 interrupt controllers. !! 156 def_bool y if SPARC64
237 157
238 The MX interrupt distributer adds In !! 158 menu "Processor type and features"
239 and causes the IRQ numbers to be inc <<
240 like the open cores ethernet driver <<
241 <<
242 You still have to select "Enable SMP <<
243 159
244 config SMP 160 config SMP
245 bool "Enable Symmetric multi-processin !! 161 bool "Symmetric multi-processing support"
246 depends on HAVE_SMP <<
247 select GENERIC_SMP_IDLE_THREAD <<
248 help 162 help
249 Enabled SMP Software; allows more th !! 163 This enables support for systems with more than one CPU. If you have
250 to be activated during startup. !! 164 a system with only one CPU, say N. If you have a system with more
>> 165 than one CPU, say Y.
>> 166
>> 167 If you say N here, the kernel will run on uni- and multiprocessor
>> 168 machines, but will use only one CPU of a multiprocessor machine. If
>> 169 you say Y here, the kernel will run on many, but not all,
>> 170 uniprocessor machines. On a uniprocessor machine, the kernel
>> 171 will run faster if you say N here.
>> 172
>> 173 People using multiprocessor machines who say Y here should also say
>> 174 Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
>> 175 Management" code will be disabled if you say Y here.
251 176
252 config NR_CPUS !! 177 See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
253 depends on SMP !! 178 available at <http://www.tldp.org/docs.html#howto>.
254 int "Maximum number of CPUs (2-32)" <<
255 range 2 32 <<
256 default "4" <<
257 179
258 config HOTPLUG_CPU !! 180 If you don't know what to do here, say N.
259 bool "Enable CPU hotplug support" !! 181
>> 182 config NR_CPUS
>> 183 int "Maximum number of CPUs"
260 depends on SMP 184 depends on SMP
261 help !! 185 range 2 32 if SPARC32
262 Say Y here to allow turning CPUs off !! 186 range 2 4096 if SPARC64
263 controlled through /sys/devices/syst !! 187 default 32 if SPARC32
>> 188 default 4096 if SPARC64
264 189
265 Say N if you want to disable CPU hot !! 190 source "kernel/Kconfig.hz"
266 191
267 config SECONDARY_RESET_VECTOR !! 192 config GENERIC_HWEIGHT
268 bool "Secondary cores use alternative !! 193 bool
269 default y 194 default y
270 depends on HAVE_SMP <<
271 help <<
272 Secondary cores may be configured to <<
273 or all cores may use primary reset v <<
274 Say Y here to supply handler for the <<
275 <<
276 config FAST_SYSCALL_XTENSA <<
277 bool "Enable fast atomic syscalls" <<
278 default n <<
279 help <<
280 fast_syscall_xtensa is a syscall tha <<
281 on UP kernel when processor has no s <<
282 <<
283 This syscall is deprecated. It may h <<
284 invalid arguments. It is provided on <<
285 Only enable it if your userspace sof <<
286 195
287 If unsure, say N. !! 196 config GENERIC_CALIBRATE_DELAY
288 !! 197 bool
289 config FAST_SYSCALL_SPILL_REGISTERS !! 198 default y
290 bool "Enable spill registers syscall" <<
291 default n <<
292 help <<
293 fast_syscall_spill_registers is a sy <<
294 register windows of a calling usersp <<
295 <<
296 This syscall is deprecated. It may h <<
297 invalid arguments. It is provided on <<
298 Only enable it if your userspace sof <<
299 <<
300 If unsure, say N. <<
301 <<
302 choice <<
303 prompt "Kernel ABI" <<
304 default KERNEL_ABI_DEFAULT <<
305 help <<
306 Select ABI for the kernel code. This <<
307 supported userspace ABI and any comb <<
308 kernel/userspace ABI is possible and <<
309 <<
310 In case both kernel and userspace su <<
311 all register windows support code wi <<
312 build. <<
313 <<
314 If unsure, choose the default ABI. <<
315 199
316 config KERNEL_ABI_DEFAULT !! 200 config ARCH_MAY_HAVE_PC_FDC
317 bool "Default ABI" !! 201 bool
318 help !! 202 default y
319 Select this option to compile kernel <<
320 selected for the toolchain. <<
321 Normally cores with windowed registe <<
322 cores without it use call0 ABI. <<
323 203
324 config KERNEL_ABI_CALL0 !! 204 config EMULATED_CMPXCHG
325 bool "Call0 ABI" if CC_HAVE_CALL0_ABI !! 205 bool
>> 206 default y if SPARC32
326 help 207 help
327 Select this option to compile kernel !! 208 Sparc32 does not have a CAS instruction like sparc64. cmpxchg()
328 toolchain that defaults to windowed !! 209 is emulated, and therefore it is not completely atomic.
329 When this option is not selected the <<
330 be used for the kernel code. <<
331 210
332 endchoice !! 211 # Makefile helpers
333 !! 212 config SPARC32_SMP
334 config USER_ABI_CALL0 <<
335 bool 213 bool
>> 214 default y
>> 215 depends on SPARC32 && SMP
336 216
337 choice !! 217 config SPARC64_SMP
338 prompt "Userspace ABI" !! 218 bool
339 default USER_ABI_DEFAULT !! 219 default y
340 help !! 220 depends on SPARC64 && SMP
341 Select supported userspace ABI. <<
342 <<
343 If unsure, choose the default ABI. <<
344 221
345 config USER_ABI_DEFAULT !! 222 config EARLYFB
346 bool "Default ABI only" !! 223 bool "Support for early boot text console"
>> 224 default y
>> 225 depends on SPARC64
347 help 226 help
348 Assume default userspace ABI. For XE !! 227 Say Y here to enable a faster early framebuffer boot console.
349 call0 ABI binaries may be run on suc <<
350 will not work correctly for them. <<
351 228
352 config USER_ABI_CALL0_ONLY !! 229 config SECCOMP
353 bool "Call0 ABI only" !! 230 bool "Enable seccomp to safely compute untrusted bytecode"
354 select USER_ABI_CALL0 !! 231 depends on SPARC64 && PROC_FS
>> 232 default y
355 help 233 help
356 Select this option to support only c !! 234 This kernel feature is useful for number crunching applications
357 Windowed ABI binaries will crash wit !! 235 that may need to compute untrusted bytecode during their
358 an illegal instruction exception on !! 236 execution. By using pipes or other transports made available to
>> 237 the process as file descriptors supporting the read/write
>> 238 syscalls, it's possible to isolate those applications in
>> 239 their own address space using seccomp. Once seccomp is
>> 240 enabled via /proc/<pid>/seccomp, it cannot be disabled
>> 241 and the task is only allowed to execute a few safe syscalls
>> 242 defined by each seccomp mode.
359 243
360 Choose this option if you're plannin !! 244 If unsure, say Y. Only embedded should say N here.
361 built with call0 ABI. <<
362 245
363 config USER_ABI_CALL0_PROBE !! 246 config HOTPLUG_CPU
364 bool "Support both windowed and call0 !! 247 bool "Support for hot-pluggable CPUs"
365 select USER_ABI_CALL0 !! 248 depends on SPARC64 && SMP
366 help 249 help
367 Select this option to support both w !! 250 Say Y here to experiment with turning CPUs off and on. CPUs
368 ABIs. When enabled all processes are !! 251 can be controlled through /sys/devices/system/cpu/cpu#.
369 and a fast user exception handler fo !! 252 Say N if you want to disable CPU hotplug.
370 used to turn on PS.WOE bit on the fi <<
371 the userspace. <<
372 <<
373 This option should be enabled for th <<
374 both call0 and windowed ABIs in user <<
375 <<
376 Note that Xtensa ISA does not guaran <<
377 raise an illegal instruction excepti <<
378 PS.WOE is disabled, check whether th <<
379 <<
380 endchoice <<
381 <<
382 endmenu <<
383 253
384 config XTENSA_CALIBRATE_CCOUNT !! 254 if SPARC64
385 def_bool n !! 255 source "drivers/cpufreq/Kconfig"
>> 256 endif
>> 257
>> 258 config US3_MC
>> 259 tristate "UltraSPARC-III Memory Controller driver"
>> 260 depends on SPARC64
>> 261 default y
386 help 262 help
387 On some platforms (XT2000, for examp !! 263 This adds a driver for the UltraSPARC-III memory controller.
388 vary. The frequency can be determin !! 264 Loading this driver allows exact mnemonic strings to be
389 against a well known, fixed frequenc !! 265 printed in the event of a memory error, so that the faulty DIMM
>> 266 on the motherboard can be matched to the error.
390 267
391 config SERIAL_CONSOLE !! 268 If in doubt, say Y, as this information can be very useful.
392 def_bool n <<
393 269
394 config PLATFORM_HAVE_XIP !! 270 # Global things across all Sun machines.
395 def_bool n !! 271 config GENERIC_LOCKBREAK
396 !! 272 bool
397 menu "Platform options" !! 273 default y
>> 274 depends on SPARC64 && SMP && PREEMPTION
398 275
399 choice !! 276 config NUMA
400 prompt "Xtensa System Type" !! 277 bool "NUMA support"
401 default XTENSA_PLATFORM_ISS !! 278 depends on SPARC64 && SMP
>> 279
>> 280 config NODES_SHIFT
>> 281 int "Maximum NUMA Nodes (as a power of 2)"
>> 282 range 4 5 if SPARC64
>> 283 default "5"
>> 284 depends on NEED_MULTIPLE_NODES
>> 285 help
>> 286 Specify the maximum number of NUMA Nodes available on the target
>> 287 system. Increases memory reserved to accommodate various tables.
>> 288
>> 289 config ARCH_SPARSEMEM_ENABLE
>> 290 def_bool y if SPARC64
>> 291 select SPARSEMEM_VMEMMAP_ENABLE
>> 292
>> 293 config ARCH_SPARSEMEM_DEFAULT
>> 294 def_bool y if SPARC64
>> 295
>> 296 config FORCE_MAX_ZONEORDER
>> 297 int "Maximum zone order"
>> 298 default "13"
>> 299 help
>> 300 The kernel memory allocator divides physically contiguous memory
>> 301 blocks into "zones", where each zone is a power of two number of
>> 302 pages. This option selects the largest power of two that the kernel
>> 303 keeps in the memory allocator. If you need to allocate very large
>> 304 blocks of physically contiguous memory, then you may need to
>> 305 increase this value.
402 306
403 config XTENSA_PLATFORM_ISS !! 307 This config option is actually maximum order plus one. For example,
404 bool "ISS" !! 308 a value of 13 means that the largest free memory block is 2^12 pages.
405 select XTENSA_CALIBRATE_CCOUNT <<
406 select SERIAL_CONSOLE <<
407 help <<
408 ISS is an acronym for Tensilica's In <<
409 309
410 config XTENSA_PLATFORM_XT2000 !! 310 if SPARC64
411 bool "XT2000" !! 311 source "kernel/power/Kconfig"
412 help !! 312 endif
413 XT2000 is the name of Tensilica's fe <<
414 This hardware is capable of running <<
415 313
416 config XTENSA_PLATFORM_XTFPGA !! 314 config SCHED_SMT
417 bool "XTFPGA" !! 315 bool "SMT (Hyperthreading) scheduler support"
418 select ETHOC if ETHERNET !! 316 depends on SPARC64 && SMP
419 select PLATFORM_WANT_DEFAULT_MEM if !M !! 317 default y
420 select SERIAL_CONSOLE <<
421 select XTENSA_CALIBRATE_CCOUNT <<
422 select PLATFORM_HAVE_XIP <<
423 help 318 help
424 XTFPGA is the name of Tensilica boar !! 319 SMT scheduler support improves the CPU scheduler's decision making
425 This hardware is capable of running !! 320 when dealing with SPARC cpus at a cost of slightly increased overhead
426 !! 321 in some places. If unsure say N here.
427 endchoice !! 322
428 !! 323 config SCHED_MC
429 config PLATFORM_NR_IRQS !! 324 bool "Multi-core scheduler support"
430 int !! 325 depends on SPARC64 && SMP
431 default 3 if XTENSA_PLATFORM_XT2000 !! 326 default y
432 default 0 <<
433 <<
434 config XTENSA_CPU_CLOCK <<
435 int "CPU clock rate [MHz]" <<
436 depends on !XTENSA_CALIBRATE_CCOUNT <<
437 default 16 <<
438 <<
439 config GENERIC_CALIBRATE_DELAY <<
440 bool "Auto calibration of the BogoMIPS <<
441 help 327 help
442 The BogoMIPS value can easily be der !! 328 Multi-core scheduler support improves the CPU scheduler's decision
>> 329 making when dealing with multi-core CPU chips at a cost of slightly
>> 330 increased overhead in some places. If unsure say N here.
443 331
444 config CMDLINE_BOOL 332 config CMDLINE_BOOL
445 bool "Default bootloader kernel argume 333 bool "Default bootloader kernel arguments"
>> 334 depends on SPARC64
446 335
447 config CMDLINE 336 config CMDLINE
448 string "Initial kernel command string" 337 string "Initial kernel command string"
449 depends on CMDLINE_BOOL 338 depends on CMDLINE_BOOL
450 default "console=ttyS0,38400 root=/dev !! 339 default "console=ttyS0,9600 root=/dev/sda1"
451 help 340 help
452 On some architectures (EBSA110 and C !! 341 Say Y here if you want to be able to pass default arguments to
453 for the boot loader to pass argument !! 342 the kernel. This will be overridden by the bootloader, if you
454 architectures, you should supply som !! 343 use one (such as SILO). This is most useful if you want to boot
455 time by entering them here. As a min !! 344 a kernel from TFTP, and want default options to be available
456 memory size and the root device (e.g !! 345 with having them passed on the command line.
457 346
458 config USE_OF !! 347 NOTE: This option WILL override the PROM bootargs setting!
459 bool "Flattened Device Tree support" !! 348
460 select OF !! 349 config SUN_PM
461 select OF_EARLY_FLATTREE !! 350 bool
>> 351 default y if SPARC32
462 help 352 help
463 Include support for flattened device !! 353 Enable power management and CPU standby features on supported
>> 354 SPARC platforms.
464 355
465 config BUILTIN_DTB_SOURCE !! 356 config SPARC_LED
466 string "DTB to build into the kernel i !! 357 tristate "Sun4m LED driver"
467 depends on OF !! 358 depends on SPARC32
>> 359 help
>> 360 This driver toggles the front-panel LED on sun4m systems
>> 361 in a user-specifiable manner. Its state can be probed
>> 362 by reading /proc/led and its blinking mode can be changed
>> 363 via writes to /proc/led
468 364
469 config PARSE_BOOTPARAM !! 365 config SERIAL_CONSOLE
470 bool "Parse bootparam block" !! 366 bool
>> 367 depends on SPARC32
471 default y 368 default y
472 help 369 help
473 Parse parameters passed to the kerne !! 370 If you say Y here, it will be possible to use a serial port as the
474 be disabled if the kernel is known t !! 371 system console (the system console is the device which receives all
475 !! 372 kernel messages and warnings and which allows logins in single user
476 If unsure, say Y. !! 373 mode). This could be useful if some terminal or printer is connected
>> 374 to that serial port.
>> 375
>> 376 Even if you say Y here, the currently visible virtual console
>> 377 (/dev/tty0) will still be used as the system console by default, but
>> 378 you can alter that using a kernel command line option such as
>> 379 "console=ttyS1". (Try "man bootparam" or see the documentation of
>> 380 your boot loader (silo) about how to pass options to the kernel at
>> 381 boot time.)
>> 382
>> 383 If you don't have a graphics card installed and you say Y here, the
>> 384 kernel will automatically use the first serial line, /dev/ttyS0, as
>> 385 system console.
477 386
478 choice !! 387 If unsure, say N.
479 prompt "Semihosting interface" <<
480 default XTENSA_SIMCALL_ISS <<
481 depends on XTENSA_PLATFORM_ISS <<
482 help <<
483 Choose semihosting interface that wi <<
484 block device and networking. <<
485 388
486 config XTENSA_SIMCALL_ISS !! 389 config SPARC_LEON
487 bool "simcall" !! 390 bool "Sparc Leon processor family"
>> 391 depends on SPARC32
>> 392 select USB_EHCI_BIG_ENDIAN_MMIO
>> 393 select USB_EHCI_BIG_ENDIAN_DESC
>> 394 select USB_UHCI_BIG_ENDIAN_MMIO
>> 395 select USB_UHCI_BIG_ENDIAN_DESC
>> 396 help
>> 397 If you say Y here if you are running on a SPARC-LEON processor.
>> 398 The LEON processor is a synthesizable VHDL model of the
>> 399 SPARC-v8 standard. LEON is part of the GRLIB collection of
>> 400 IP cores that are distributed under GPL. GRLIB can be downloaded
>> 401 from www.gaisler.com. You can download a sparc-linux cross-compilation
>> 402 toolchain at www.gaisler.com.
>> 403
>> 404 if SPARC_LEON
>> 405 menu "U-Boot options"
>> 406
>> 407 config UBOOT_LOAD_ADDR
>> 408 hex "uImage Load Address"
>> 409 default 0x40004000
>> 410 help
>> 411 U-Boot kernel load address, the address in physical address space
>> 412 where u-boot will place the Linux kernel before booting it.
>> 413 This address is normally the base address of main memory + 0x4000.
>> 414
>> 415 config UBOOT_FLASH_ADDR
>> 416 hex "uImage.o Load Address"
>> 417 default 0x00080000
>> 418 help
>> 419 Optional setting only affecting the uImage.o ELF-image used to
>> 420 download the uImage file to the target using a ELF-loader other than
>> 421 U-Boot. It may for example be used to download an uImage to FLASH with
>> 422 the GRMON utility before even starting u-boot.
>> 423
>> 424 config UBOOT_ENTRY_ADDR
>> 425 hex "uImage Entry Address"
>> 426 default 0xf0004000
488 help 427 help
489 Use simcall instruction. simcall is !! 428 Do not change this unless you know what you're doing. This is
490 it does nothing on hardware. !! 429 hardcoded by the SPARC32 and LEON port.
491 430
492 config XTENSA_SIMCALL_GDBIO !! 431 This is the virtual address u-boot jumps to when booting the Linux
493 bool "GDBIO" !! 432 Kernel.
494 help <<
495 Use break instruction. It is availab <<
496 is attached to it via JTAG. <<
497 433
498 endchoice !! 434 endmenu
>> 435 endif
499 436
500 config BLK_DEV_SIMDISK !! 437 endmenu
501 tristate "Host file-based simulated bl <<
502 default n <<
503 depends on XTENSA_PLATFORM_ISS && BLOC <<
504 help <<
505 Create block devices that map to fil <<
506 Device binding to host file may be c <<
507 interface provided the device is not <<
508 438
509 config BLK_DEV_SIMDISK_COUNT !! 439 menu "Bus options (PCI etc.)"
510 int "Number of host file-based simulat !! 440 config SBUS
511 range 1 10 !! 441 bool
512 depends on BLK_DEV_SIMDISK !! 442 default y
513 default 2 <<
514 help <<
515 This is the default minimal number o <<
516 Kernel/module parameter 'simdisk_cou <<
517 value at runtime. More file names (b <<
518 specified as parameters, simdisk_cou <<
519 443
520 config SIMDISK0_FILENAME !! 444 config SBUSCHAR
521 string "Host filename for the first si !! 445 bool
522 depends on BLK_DEV_SIMDISK = y !! 446 default y
523 default "" <<
524 help <<
525 Attach a first simdisk to a host fil <<
526 contains a root file system. <<
527 447
528 config SIMDISK1_FILENAME !! 448 config SUN_LDOMS
529 string "Host filename for the second s !! 449 bool "Sun Logical Domains support"
530 depends on BLK_DEV_SIMDISK = y && BLK_ !! 450 depends on SPARC64
531 default "" <<
532 help 451 help
533 Another simulated disk in a host fil !! 452 Say Y here is you want to support virtual devices via
534 storage. !! 453 Logical Domains.
535 454
536 config XTFPGA_LCD !! 455 config PCIC_PCI
537 bool "Enable XTFPGA LCD driver" !! 456 bool
538 depends on XTENSA_PLATFORM_XTFPGA !! 457 depends on PCI && SPARC32 && !SPARC_LEON
539 default n !! 458 default y
540 help <<
541 There's a 2x16 LCD on most of XTFPGA <<
542 progress messages there during bootu <<
543 during board bringup. <<
544 459
545 If unsure, say N. !! 460 config LEON_PCI
>> 461 bool
>> 462 depends on PCI && SPARC_LEON
>> 463 default y
546 464
547 config XTFPGA_LCD_BASE_ADDR !! 465 config SPARC_GRPCI1
548 hex "XTFPGA LCD base address" !! 466 bool "GRPCI Host Bridge Support"
549 depends on XTFPGA_LCD !! 467 depends on LEON_PCI
550 default "0x0d0c0000" !! 468 default y
551 help !! 469 help
552 Base address of the LCD controller i !! 470 Say Y here to include the GRPCI Host Bridge Driver. The GRPCI
553 Different boards from XTFPGA family !! 471 PCI host controller is typically found in GRLIB SPARC32/LEON
554 addresses. Please consult prototypin !! 472 systems. The driver has one property (all_pci_errors) controlled
555 the correct address. Wrong address h !! 473 from the bootloader that makes the GRPCI to generate interrupts
556 !! 474 on detected PCI Parity and System errors.
557 config XTFPGA_LCD_8BIT_ACCESS !! 475
558 bool "Use 8-bit access to XTFPGA LCD" !! 476 config SPARC_GRPCI2
559 depends on XTFPGA_LCD !! 477 bool "GRPCI2 Host Bridge Support"
560 default n !! 478 depends on LEON_PCI
561 help !! 479 default y
562 LCD may be connected with 4- or 8-bi !! 480 help
563 only be used with 8-bit interface. P !! 481 Say Y here to include the GRPCI2 Host Bridge Driver.
564 guide for your board for the correct <<
565 <<
566 comment "Kernel memory layout" <<
567 <<
568 config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX <<
569 bool "Initialize Xtensa MMU inside the <<
570 depends on !XTENSA_VARIANT_FSF && !XTE <<
571 default y if XTENSA_VARIANT_DC233C || <<
572 help <<
573 Earlier version initialized the MMU <<
574 before jumping to _startup in head.S <<
575 it was possible to place a software <<
576 then enter your normal kernel breakp <<
577 to the kernel mappings (0XC0000000). <<
578 <<
579 This unfortunately won't work for U- <<
580 work for using KEXEC to have a hot k <<
581 KDUMP. <<
582 <<
583 So now the MMU is initialized in hea <<
584 use hardware breakpoints (gdb 'hbrea <<
585 xt-gdb can't place a Software Breakp <<
586 to mapping the MMU and after mapping <<
587 was mapped gdb wouldn't remove the b <<
588 PC wouldn't match. Since Hardware Br <<
589 Linux configurations it seems reason <<
590 and leave this older mechanism for u <<
591 not to follow Tensilica's recommenda <<
592 <<
593 Selecting this will cause U-Boot to <<
594 address at 0x00003000 instead of the <<
595 <<
596 If in doubt, say Y. <<
597 <<
598 config XIP_KERNEL <<
599 bool "Kernel Execute-In-Place from ROM <<
600 depends on PLATFORM_HAVE_XIP <<
601 help <<
602 Execute-In-Place allows the kernel t <<
603 directly addressable by the CPU, suc <<
604 space since the text section of the <<
605 to RAM. Read-write sections, such as <<
606 are still copied to RAM. The XIP ker <<
607 it has to run directly from flash, s <<
608 store it. The flash address used to <<
609 and for storing it, is configuration <<
610 say Y here, you must know the proper <<
611 store the kernel image depending on <<
612 <<
613 Also note that the make target becom <<
614 "make Image" or "make uImage". The f <<
615 ROM memory will be arch/xtensa/boot/ <<
616 482
617 If unsure, say N. !! 483 config SUN_OPENPROMFS
>> 484 tristate "Openprom tree appears in /proc/openprom"
>> 485 help
>> 486 If you say Y, the OpenPROM device tree will be available as a
>> 487 virtual file system, which you can mount to /proc/openprom by "mount
>> 488 -t openpromfs none /proc/openprom".
618 489
619 config MEMMAP_CACHEATTR !! 490 To compile the /proc/openprom support as a module, choose M here: the
620 hex "Cache attributes for the memory a !! 491 module will be called openpromfs.
621 depends on !MMU <<
622 default 0x22222222 <<
623 help <<
624 These cache attributes are set up fo <<
625 specifies cache attributes for the c <<
626 region: bits 0..3 -- for addresses 0 <<
627 bits 4..7 -- for addresses 0x2000000 <<
628 <<
629 Cache attribute values are specific <<
630 For region protection MMUs: <<
631 1: WT cached, <<
632 2: cache bypass, <<
633 4: WB cached, <<
634 f: illegal. <<
635 For full MMU: <<
636 bit 0: executable, <<
637 bit 1: writable, <<
638 bits 2..3: <<
639 0: cache bypass, <<
640 1: WB cache, <<
641 2: WT cache, <<
642 3: special (c and e are illegal, <<
643 For MPU: <<
644 0: illegal, <<
645 1: WB cache, <<
646 2: WB, no-write-allocate cache, <<
647 3: WT cache, <<
648 4: cache bypass. <<
649 <<
650 config KSEG_PADDR <<
651 hex "Physical address of the KSEG mapp <<
652 depends on INITIALIZE_XTENSA_MMU_INSID <<
653 default 0x00000000 <<
654 help <<
655 This is the physical address where K <<
656 the chosen KSEG layout help for the <<
657 Unpacked kernel image (including vec <<
658 within KSEG. <<
659 Physical memory below this address i <<
660 <<
661 If unsure, leave the default value h <<
662 <<
663 config KERNEL_VIRTUAL_ADDRESS <<
664 hex "Kernel virtual address" <<
665 depends on MMU && XIP_KERNEL <<
666 default 0xd0003000 <<
667 help <<
668 This is the virtual address where th <<
669 XIP kernel may be mapped into KSEG o <<
670 provided here must match kernel load <<
671 KERNEL_LOAD_ADDRESS. <<
672 <<
673 config KERNEL_LOAD_ADDRESS <<
674 hex "Kernel load address" <<
675 default 0x60003000 if !MMU <<
676 default 0x00003000 if MMU && INITIALIZ <<
677 default 0xd0003000 if MMU && !INITIALI <<
678 help <<
679 This is the address where the kernel <<
680 It is virtual address for MMUv2 conf <<
681 for all other configurations. <<
682 <<
683 If unsure, leave the default value h <<
684 <<
685 choice <<
686 prompt "Relocatable vectors location" <<
687 default XTENSA_VECTORS_IN_TEXT <<
688 help <<
689 Choose whether relocatable vectors a <<
690 or placed separately at runtime. Thi <<
691 configurations without VECBASE regis <<
692 placed at their hardware-defined loc <<
693 <<
694 config XTENSA_VECTORS_IN_TEXT <<
695 bool "Merge relocatable vectors into k <<
696 depends on !MTD_XIP <<
697 help <<
698 This option puts relocatable vectors <<
699 with proper alignment. <<
700 This is a safe choice for most confi <<
701 <<
702 config XTENSA_VECTORS_SEPARATE <<
703 bool "Put relocatable vectors at fixed <<
704 help <<
705 This option puts relocatable vectors <<
706 Vectors are merged with the .init da <<
707 are copied into their designated loc <<
708 Use it to put vectors into IRAM or o <<
709 XIP-aware MTD support. <<
710 <<
711 endchoice <<
712 <<
713 config VECTORS_ADDR <<
714 hex "Kernel vectors virtual address" <<
715 default 0x00000000 <<
716 depends on XTENSA_VECTORS_SEPARATE <<
717 help <<
718 This is the virtual address of the ( <<
719 It must be within KSEG if MMU is use <<
720 <<
721 config XIP_DATA_ADDR <<
722 hex "XIP kernel data virtual address" <<
723 depends on XIP_KERNEL <<
724 default 0x00000000 <<
725 help <<
726 This is the virtual address where XI <<
727 It must be within KSEG if MMU is use <<
728 <<
729 config PLATFORM_WANT_DEFAULT_MEM <<
730 def_bool n <<
731 <<
732 config DEFAULT_MEM_START <<
733 hex <<
734 prompt "PAGE_OFFSET/PHYS_OFFSET" if !M <<
735 default 0x60000000 if PLATFORM_WANT_DE <<
736 default 0x00000000 <<
737 help <<
738 This is the base address used for bo <<
739 in noMMU configurations. <<
740 <<
741 If unsure, leave the default value h <<
742 <<
743 choice <<
744 prompt "KSEG layout" <<
745 depends on MMU <<
746 default XTENSA_KSEG_MMU_V2 <<
747 <<
748 config XTENSA_KSEG_MMU_V2 <<
749 bool "MMUv2: 128MB cached + 128MB unca <<
750 help <<
751 MMUv2 compatible kernel memory map: <<
752 at KSEG_PADDR to 0xd0000000 with cac <<
753 without cache. <<
754 KSEG_PADDR must be aligned to 128MB. <<
755 <<
756 config XTENSA_KSEG_256M <<
757 bool "256MB cached + 256MB uncached" <<
758 depends on INITIALIZE_XTENSA_MMU_INSID <<
759 help <<
760 TLB way 6 maps 256MB starting at KSE <<
761 with cache and to 0xc0000000 without <<
762 KSEG_PADDR must be aligned to 256MB. <<
763 <<
764 config XTENSA_KSEG_512M <<
765 bool "512MB cached + 512MB uncached" <<
766 depends on INITIALIZE_XTENSA_MMU_INSID <<
767 help <<
768 TLB way 6 maps 512MB starting at KSE <<
769 with cache and to 0xc0000000 without <<
770 KSEG_PADDR must be aligned to 256MB. <<
771 492
772 endchoice !! 493 Only choose N if you know in advance that you will not need to modify
>> 494 OpenPROM settings on the running system.
773 495
774 config HIGHMEM !! 496 # Makefile helpers
775 bool "High Memory Support" !! 497 config SPARC64_PCI
776 depends on MMU !! 498 bool
777 select KMAP_LOCAL !! 499 default y
778 help !! 500 depends on SPARC64 && PCI
779 Linux can use the full amount of RAM <<
780 default. However, the default MMUv2 <<
781 lowermost 128 MB of memory linearly <<
782 at 0xd0000000 (cached) and 0xd800000 <<
783 When there are more than 128 MB memo <<
784 all of it can be "permanently mapped <<
785 The physical memory that's not perma <<
786 "high memory". <<
787 <<
788 If you are compiling a kernel which <<
789 machine with more than 128 MB total <<
790 N here. <<
791 <<
792 If unsure, say Y. <<
793 <<
794 config ARCH_FORCE_MAX_ORDER <<
795 int "Order of maximal physically conti <<
796 default "10" <<
797 help <<
798 The kernel page allocator limits the <<
799 contiguous allocations. The limit is <<
800 defines the maximal power of two of <<
801 allocated as a single contiguous blo <<
802 overriding the default setting when <<
803 large blocks of physically contiguou <<
804 501
805 Don't change if unsure. !! 502 config SPARC64_PCI_MSI
>> 503 bool
>> 504 default y
>> 505 depends on SPARC64_PCI && PCI_MSI
806 506
807 endmenu 507 endmenu
808 508
809 menu "Power management options" !! 509 config COMPAT
810 !! 510 bool
811 config ARCH_HIBERNATION_POSSIBLE !! 511 depends on SPARC64
812 def_bool y !! 512 default y
>> 513 select COMPAT_BINFMT_ELF
>> 514 select HAVE_UID16
>> 515 select ARCH_WANT_OLD_COMPAT_IPC
>> 516 select COMPAT_OLD_SIGACTION
813 517
814 source "kernel/power/Kconfig" !! 518 config SYSVIPC_COMPAT
>> 519 bool
>> 520 depends on COMPAT && SYSVIPC
>> 521 default y
815 522
816 endmenu !! 523 source "drivers/sbus/char/Kconfig"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.